Cincinnati Milacron 75 Lb. Blow Molder Cincinnati Milacron 8 Lb. Dual Head Blow Molder Cincinnati Milacron 5 Lb. Dual Head Blow Molder.

Transcription

1 LIVE ON-SITE & AUCTION AUCTION: Tuesday, March 20, Beginning at 10:00am EDT LOCATION: 109 Sands Road, Reidsville, NC PREVIEW: Monday, March 19, 9:00am to 4:00pm or By Appointment Please Call for More Information COMPLETE BLOW MOLDING FACILITY! REAL ESTATE: 120,000 SQ. FT. ON 17.5 ACRES TO BE OFFERED IN BULK OR PIECEMEAL FEATURING: (7) Blow Molding Machines, Maguire, AEC & Conair Blenders, Rotogran, Rapid, Cumberland & CSC Tradate Granulators, Chillers, Air Dryers, Air Compressors, Rolling Stock, Vehicles & More Assets Formerly of: Cincinnati Milacron 75 Lb. Blow Molder Cincinnati Milacron 8 Lb. Dual Head Blow Molder Cincinnati Milacron 5 Lb. Dual Head Blow Molder 1 of 5 1 of 7 Maguire Gravimetric Blender AEC Silos REAL ESTATE: 120,000 Sq. Ft. on 17.5 Acres For Complete Photos & Lot Listings go to:

2 BLOW MOLDING 2000 CINCINNATI MILACRON 75 LB. BLOW MOLDING MACHINE, Mdl. T2000V-150G-S75, Single Head, Shot Size: 75 Lb., Platen Size: 62 x 82, Max Daylight: 74, Clamp Force: 220-Ton, Screw Size: 6, CAMAC 486C Control, S/N B80A CINCINNATI MILACRON 8 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D-S-8, Dual Head, Shot Size: 8 Lb. Each, Platen Size: 40 x 40, Center: 20, Max Daylight: 24 /49, Clamp Force: 50-Ton, Screw Size: 90mm, CAMAC 486 Control, S/N B72A CINCINNATI MILACRON 5 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D5-01.5, Dual Head, Shot Size: 5 Lb. Each, Platen Size: 40 x 37, Center 20, Max Daylight 15 /40, Clamp Force: 50-Ton, Clamp Stroke: 20, Screw Size: 90mm, CAMAC 486C Control, S/N B72A CINCINNATI MILACRON 5 LB. DUAL HEAD BLOW MOLDING MACHINE, Mdl. E90-D-5, Dual Head, Shot Size: 5 Lb. Each, Platen Size: 40 x 37, Center 20, Max Daylight 15 /40, Clamp Force: 50-Ton, Clamp Stroke: 20, Screw Size: 90mm, CAMAC 486 Control, S/N B72A STERLING 50 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 50 Lb., Platen Size: 60 x 74, Max Daylight: 40 /82, Clamp Force: 180-Ton, Screw Size: 6, Barber Coleman Maco Compact Control, S/N 55816, Head rebuilt in HARTIG 15 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 15 Lb., Platen Size: 40 x 40, Max Daylight: 27 /60, Screw Size: 4-1/2, Macro 6500 Control 1991 HARTIG 70 LB. BLOW MOLDING MACHINE, Single Head, Shot Size: 70 Lb. Inverted, Platen Size 48 x 72, Max Daylight: 16 /66, Screw Size: 4-1/2, Maco 8000 Control Cincinnati Milacron 75 Lb. Blow Molding Machine 2002 Cincinnati Milacron 8 Lb. Dual Head Blow Molding Machine Cincinnati Milacron 5 Lb. Dual Head Blow Molding Machine Cincinnati Milacron 5 Lb. Dual Head Blow Molding Machine 1997 Sterling 50 Lb. Blow Molding Machine Hartig 15 Lb. Blow Molding Machine Hartig 70 Lb. Blow Molding Machine TO SCHEDULE AN AUCTION OR APPRAISAL CALL

3 BLENDERS & GRANULATORS (2) MAGUIRE GRAVIMETRIC BLENDERS, Mdl WSB-440R, S/N and (5) MAGUIRE GRAVIMETRIC BLENDERS (2) WITTMANN BLENDERS 2004 ROTOGRAN GRANULATOR, Mdl. WO-3636-SP, 125HP, 36 x 36 Opening, S/N GM363SP WO 2004 ROTOGRAN GRANULATOR, Mdl. WO-2236-SP, 75HP, 22 x 36 Opening, S/N GM2236SP WO (3) RAPID GRANULATORS, Mdl K, 18 x 24 Opening (3) RAPID GRANULATORS, Mdl K, 14 x 18 Opening 1 of 2 1 of 5 1 of 2 Maguire Gravimetric Blender Maguire Gravimetric Blender Wittmann Blender 2004 RotoGran WO-3636-SP Granulator SUPPORT EQUIP. (8) AEC VACUUM PUMPS, Filter Chamber Mdl. VFCB1000, Power Unit Mdl. APD-15, 15HP (6) AEC MATERIAL HOPPERS (7) AEC SILOS 2013 DAKIN CHILLER, Mdl. AGZ160DHHNN-ER10, R410A Refrigerant Only, S/N STNU ADVANTAGE CHILLER, Mdl. TTX-850-2P INGERSOLL RAND AIR COMPRESSOR, Mdl. SSR-E120 AIRTAK REFRIGERATED DRYER, Mdl. AC-800-A-SP, 5 HP, R-22 Refrigerant, S/N (2) AEC COOLING TOWERS, Mdl. FG of 3 1 of 3 RotoGran WO-2236-SP Granulator Rapid 1824-K Granulator Rapid 1418-K Granulator 8 Available 6 Available 7 Available AEC Vacuum Pumps AEC Material Hoppers AEC Silos of 2 Dakin Chiller Ingersoll Rand Air Compressor AirTak Refrigerated Dryer AEC Cooling Tower Register at and receive auction updates via

4 MISCELLANEOUS EQUIPMENT SELCO VERTICAL BALER, Mdl. V5-HD, S/N SA (4) ACROMARK HOT STAMPING MACHINES 2007 ORION PALLET WRAPPING MACHINE, Mdl. Spectra LP, S/N LANTECH PALLET WRAPPING MACHINE, Q Series POWERMATIC DRILL PRESS, Mdl DELTA DRILL PRESS, Mdl. DP 300L JET HORIZONTAL BANDSAW, On Wheels CHEMFREE PARTS WASHER, Mdl ROTARY CUTTERS (90) SECTIONS OF PALLET RACKING (4) AMETEK BATTERY CHARGERS, Mdl. E680-EC3-18SP 1 of ALSO INCLUDED: Spare Parts for Blow Molders, Label Printers (Zebra, Datamax and Intermac), Power Tools, Pneumatic Tools, Turboskill Torches, Scales, Calipers, Banding Carts, Shop Carts, Lyon Cabinets, Storage Cabinets, Flammable Cabinets, Office Furniture and Much More Selco Vertical Baler Acromark Hot Stamping Machine Orion Pallet Wrapping Machine Lantech Pallet Wrapping Machine Jet Horizontal Bandsaw View of Rotary Cutters (90) Sections of Pallet Racking 1 of 4 Ametek Battery Charger View of Spare Parts for Blow Molders View of Label Printers View of Power & Pneumatic Tools View of Scales View of Lyon Cabinets TO SCHEDULE AN AUCTION OR APPRAISAL CALL

5 ROLLING STOCK & VEHICLES TOYOTA FORKLIFT, Mdl. 7FGU25, 5,400 Lb. Cap., Side Shift, 3-Stage Mast, LP Gas, S/N FORD F-150 PICKUP TRUCK, 108,687 Miles, VIN: 1FTRF12W37KC86762 (3) 53 FRUEHAUF VAN TRAILERS GREAT DANE VAN TRAILER & 53 BUDD VAN TRAILER 1 of Toyota 7FGU25 Forklift Ford F-150 Pickup Truck 53 Fruehauf Van Trailer Great Dane Van Trailer THE FOLLOWING PRODUCT MOLDS WILL BE SOLD AT AUCTION PolyFlange Dock Floats Molds Semi-Automated Waste Carts Molds Plastic Cans/Liners (for Street Furniture ) Molds Double Walled Case Molds 2 x 4 x 8 Cutaway View 2 x 4 Float 4 x 4 Float Dock Floats Dock Being Set in Place Waste Can Can w/handles POLYFLANGE DOCK FLOATS COME IN 3 FOOTPRINTS: 2 x4, 3 x4, And 4 x4. Float Sizes: 2 x4 Depths: 8, 12, 16, 18, 20, 22 3 x4 Depths: 12, 16, 18, 20, 22, 24 4 x4 Depths: 12, 16, 18, 20 PROPRIETARY WASTE CARTS: Blow Molded, Semi-Automated Waste Carts In Three Sizes: Gallons Gallons Gallons WASTE CART SERVICE PARTS: Replacement Part For: Bracket (3165/3190 Carts) Handle (3390R Cart) 3110 Lid (3190 Cart) 3115 Lid (3390U Cart) 3320 Lid (3390R Cart) Purchased Component Parts: Wheels, Axles, Latches, Wear Pads, Etc. OTHER WASTE PRODUCTS: Plastic Cans/Liners Used In Street Furniture: Proprietary Cans/Liners (With Or Without Handles) 22 & 32 Gallon Cans/Liner Please Visit for More Information REAL ESTATE TO BE OFFERED SUBJECT TO CONFIRMATION Formerly of: TOLEDO MOLD & DIE 109 Sands Road, Reidsville, NC COMPLETE BLOW MOLDING FACILITY 120,000 SQ.FT. ON 17.5 ACRES Sale Subject to Reserve and Acceptance of any Bids Subject to Confirmation by the Owner LAND Total Site Acreage is 17.5 Acres Gross Building Area - 120,900 Sq.Ft. MANUFACTURING PLANT 90,000 Sq.Ft., Includes a 37,500 Sq.Ft. Addition Completed in 2010 Ceiling Height: 32.5 Feet High at Peak, 20 Feet High at Eaves A New Employee Break Room (w/restrooms) Was Added in 2013 New AEC Central Material Handling System Added in Ton Chiller; 100-Ton Tower 7 Silos 130,000 Lbs.; 180,000 Lbs.) 10 Dock Doors WAREHOUSE 30,600 Sq.Ft. 3 Dock Doors Ceiling Height: 18.5 Ft. High at Peak, 14.5 Ft. High at Eaves FOR ADDITIONAL INFORMATION, PLEASE CALL

6 Live On-Site & Webcast AUCTION Tue., March 20 at 10:00am EDT 109 Sands Road, Reidsville, NC Assets Formerly of: Cincinnati Milacron Blow Molder Rapid Granulator AEC Vacuum Pumps COMPLETE BLOW MOLDING FACILITY! PROPERTY, PLANT & EQUIPMENT 2301 Belgrave Avenue Huntington Park, CA Phone: Fax: Brian Holland, Auctioneer NC License #8998 MACHINERY AUCTION, LOOK INSIDE! ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Cincinnati Milacron 5 Lb. Blow Molder SCAN QR CODE TO SEE ALL INFORMATION ABOUT THIS AUCTION! ON-SITE & WEBCAST AUCTION AUCTION: Tuesday, March 20, Beginning at 10:00am EDT LOCATION: 109 Sands Road, Reidsville, NC PREVIEW: Monday, March 19, 9:00am to 4:00pm or By Appointment COMPLETE BLOW MOLDING FACILITY! REAL ESTATE: 120,000 SQ. FT. ON 17.5 ACRES TO BE OFFERED IN BULK OR PIECEMEAL LODGING BEST WESTERN (336) Silas Creek Pkwy, Winston-Salem, NC HOLIDAY INN (336) Express Drive, Reidsville, NC Assets Formerly of: DIRECTIONS FROM: PIEDMONT TRIAD INTERNATIONAL AIRPORT (PTI): Head southeast on Ted Johnson Pkwy toward PTI Dr. Slight left onto S Arrival Dr/Ted Johnson Pkwy. Slight right onto Airport Pkwy/Ted Johnson Pkwy. Merge onto I-73 N. Merge onto US Hwy 220 N. Turn right onto US-158 E. Turn right to merge onto NC-87/Freeway Dr. Turn left onto S Scales St. Turn right onto Sands Rd. Destination will be on the right. ONSITE BIDDER INSTRUCTIONS: $500 cash minimum registration deposit or 25% of approximately bid amount (whichever is greater) via wire transfer ACH, cashier s check or bank letter to Blank Signed Company Check (To be returned once final payment is received). Please refer to for complete registration information. ONLINE BIDDER INSTRUCTIONS: All internet bidders must register for this auction at least 72-hours prior to the sale date, if you do not you will not be approved. All internet bidders must provide a wire transfer deposit of approximately 25% of your planned spending amount or $2,500 minimum, whichever is greater in order to be approved to bid. Those who do not post the deposit will not be approved. Period. Please refer to for online bidder terms. PCM Preceision Custom Molders, Inc UPCOMING AUCTION CALENDAR PRECISION CUSTOM MOLDERS COMPLETE PLASTIC INJECTION MOLDING FACILITY Tuesday, March 6th at 10:00am CST 1802 Holian Drive, Spring Grove, IL GOODMAN MFG. CO., L.P. MFR. OF HEAT EXCHANGERS & AIR CONDITIONERS Wednesday, March 7th at 10:00am CST 1502 Greengrass Drive, Houston, TX TRITON SERVICES INC. LATE MODEL CONSTRUCTION EQUIPMENT Thursday, March 8th at 11:00am EST E Miami River Road, Cincinnati, OH FOR THE COMPLETE TERMS & CONDITIONS OF THE FEATURED AUCTION Please visit our website Thinking of having an auction or need an appraisal? Call us at