AC motors DR J (LSPM technology) / DRL / DRK / DRM

Transcription

1 AC motors DR J (LSPM technology) / DR series: Type DR J (LSPM) variant NEW Line Start Permanent Magnet Motor The synchronous motor variant DR J (LSPM technology) is integrated in the modular DR motor system and is available in sizes 71S to 100L. The technology is based on the addition of permanent magnets underneath the squirrel cage of synchronous AC motors One motor three variants three energy efficiency classes: DR J motors are available in energy efficiency versions DRE..J (IE2), DRP..J (IE3) and NEW in DRU..J (IE4) in LSPM technology They are indicated by the character J following the length designation Compared to a series motor with the same power rating, smaller sizes of the DR...J (LSPM technology) motors achieve the same energy efficiency class Compact and sturdy design. Motors run with the synchronous speed of the supply frequency Slip-freespeed control without encoder feedback No rotor losses occur during operation: - High efficiency from IE2 up to IE4 - More compact design compared to standard asynchronous motors DR J LSPM motors can be operated on the grid or on frequency inverters MOVITRAC LTP-B, MOVITRAC B, MOVIFIT FC and MOVIMOT D Can be used as individual or group drive with a frequency inverter Many additional features of the modular DR motor system are available Can be combined with the 7-Series of the modular gear unit system from SEW-EURODRIVE Constant torque in the speed setting range (CT) without forced cooling fan

2 AC motors DR J (LSPM technology) / Technical data Mains operation / 50 Hz Rated speed: 1500 rpm DRU..J IE4 71S L DRP..J IE3 71S L DRE..J IE2 71S M FI operation / 50 Hz Constant torque from rpm [CT 1:5] DRU..J IE4 71S L DRP..J IE3 71S L DRE..J IE2 71S M FI operation / 87 Hz Constant torque from min -1 [CT 1:8.7] DRU..J IE4 71S L DRP..J * 71S L DRE..J * 71S M * IE2 and IE3 according to IEC 60034:30 applies only to a frequency of 50 Hz.

3 DR series: DRL variant The DRL variant has high rated torques and is suited for high dynamic loads. This means DRL motors fulfill all the properties of an asynchronous servomotor. Torque M N [Nm] Dynamics package 1 Dynamics package 2 ~ 200% M dyn / M N ; normal pinion shaft end for direct gear unit mounting ~ 300% M dyn / M N ; reinforced pinion shaft end for direct gear unit mounting Sizes Lengths S, M, MC, L, LC Speed classes [rpm] 1200, 1700, 2100, 3000

4 DR series: DRK variant The DRK variant sizes 71 and 80 is a three-phase motor that can be operated at a single-phase grid. DRK motor sizes 90 and 100 are built conventionally with main and auxiliary winding. Sizes Power Frequency [Hz] Energy efficiency class DRK 71S ) IE1 2) DRK 80S IE1 2) DRK 80M IE1 2) DRK 90M IE1 2) DRK 90L IE1 2) DRK 100M IE1 2) DRK 100L IE1 2) 1) 60 Hz on request 2) According to IEC Ed2

5 DR series: DRM variant The DRM variant is a 12-pole motor that can be operated continuously and thermally safe on a three-phase system even when the rotor is blocked. The designation torque motor is also maintained for DRM motors. Every torque motor is available with three rated torques. Consequently, all requirements of the application can be easily fulfilled Many additional features of the modular DR motor system are available Can be combined with the 7-Series of the modular gear unit system from SEW-EURODRIVE Standstill torque, rating 1 M 0 [Nm] rating 1 S1, continuous duty Standstill torque, rating 2 M 0 [Nm] rating 2 S3/15%, intermittend duty with a cyclic duration factor of 15% Standstill torque, rating 3 M 0 [Nm] rating 3 S1, continuous duty with forced cooling fan Sizes Lengths S, M, L Frequency [Hz] 50, 60