WASHINGTON, PA UPCOMING AUCTIONS. AUCTION LOCATION Double Tree Hotel 320 Racetrack Rd Thursday April 13th, 9:00AM (EDT)

Transcription

1 Thursday April 13th, 9:00AM (EDT) AUCTION LOCATION Double Tree Hotel 320 Racetrack Rd UPCOMING AUCTIONS April 20th, 2017 TONKAWA, OKLAHOMA Drill Bits Gary Stout May 10th, 2017 ODESSA, TEXAS Well Service Rigs & Related Equipment Steve Taylor May 24th & 25th, 2017 OKLAHOMA CITY, OKLAHOMA Well Service Drilling Trucks/Trailers Tim Archer June 14th & 15th, 2017 ODESSA, TEXAS Well Service Drilling Trucks/Trailers Steve Taylor July 26th, 2017 GRAPEVINE, TEXAS AESC Benefit Auction Scott Felker BOOK YOUR SALE HERE! REMOVAL CHARGES Removal Charges will be indicated or announced following the lot number and description. Any applicable removal charges will be added to the buyer s purchase price. IMPORTANT! Please read the terms and conditions of the sale located at the back of this catalog and become familiar with them before bidding on any merchandise. If you have any questions regarding the terms or procedures, ask one of our auction representatives and we will be happy to assist you. Thanks for your patronage.

2 YARD DIRECTIONS & CHECK-OUT INFO. YARD #4 - DEXTER, OH ADDRESS: Warren Drilling 305 Smithson St, Dexter City, OH CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Fri, EXCLUDING WEEKENDS CHECKOUT CONTACTS: Dan or Randy YARD #5 - VIENNA, OH ADDRESS: Diamond Oilfield 5061 Warren Sharon Rd, Vienna, OH YARD #1 - MT. MORRIS, PA ADDRESS: Nomac Drilling 171 Locus Ave Extension, Mt. Morris, PA CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Sun, INCLUDING WEEKENDS NOTE: Pole Trucks & Forklifts Can Be Available for Loadout, Contact Rodney Peugh CHECKOUT SUPERVISOR: Rodney CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Sun, INCLUDING WEEKENDS CHECKOUT CONTACT: Matthew YARD #7 - LUTHERSBURG, PA ADDRESS: HWD 7350 Coal Hill Rd, Luthersburg, PA CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Fri, EXCLUDING WEEKENDS CHECKOUT CONTACT: Mike YARD #2 - MT. MORRIS, PA ADDRESS: Capital City Group 129 Free Soil Rd, Mt. Morris, PA CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Fri, EXCLUDING WEEKENDS NOTE: CHECKOUT CONTACT: Travis or YARD #9 - EAST PALESTINE, OH ADDRESS: East Taggart St, East Palestine, OH CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Fri, EXCLUDING WEEKENDS CHECKOUT CONTACT: Mike YARD #3 - ADDRESS: KCS 1000 Sheffield St, Washington, PA CHECKOUT thru Thursday, April 27, 2017 (8-5) Mon- Fri, EXCLUDING WEEKENDS CHECKOUT CONTACT: Jordan NO WARRANTIES WRITTEN, STATED or IMPLIED PLEASE INSPECT ALL EQUIPMENT

3 The Kruse Energy Auction Team Tim Justin Gary Amy Debbie Jeff Eric James Scott Kenny Jacob Dylan Helen Marty Dan David Mitchell J.D Larry Patrick George Jim Larry Todd Gary Sue Steve Paula TABLE OF CONTENTS Shop Equipment FORD Dump Truck ATLAS COPCO RD20 Rig Package S&S CROWN 750 Rig Package NATIONAL OILWELL 610M Drwwks Top Drives Triplex Pumps Pump Power Generators Diesel Engines Drill Pipe/Collars Casing Laydown Trucks Truck & Trailers Frac Tanks Well Control Equipment Rig Houses Drilling Components Lot 11 Lot 16 Lot 17 Lot 22 Lot 42 Lot 43 Lot 59 Lot 67 Lot 77 Lot 88 Lot 117 Lot 204 Lot 206 Lot 216 Lot 242 Lot 247 Lot 253 NOTE: A 2.5% Administrative Fee will be charged on all purchases. Odessa, TX Office (Corporate) County Road 128 West Odessa, Texas Tel Fax Oklahoma City, OK Office 6501 SW 44th St Oklahoma City, OK Tel Fax NO WARRANTIES WRITTEN, STATED or IMPLIED

4 1 A 1 NOV Type D 6000# Mud Gauge (UNUSED) 1 A 2 Model # Mud Gauge (UNUSED) 1 A 3 MF Type D 6000# Mud Gauge (UNUSED) 1 A 4 NOV Type F 6000# Mud Gauge (UNUSED) 1 A 5 CAMERON Type D 5000# Mud Gauge (UNUSED) 1 A 6 NOV Type D 5000# Mud Gauge (UNUSED) 1 A 7 MF Type D 5000# Mud Gauge (UNUSED) 1 A 8 MF Type D 5000# Mud Gauge (UNUSED) 1 A 9 MF Type D 3000# Mud Gauge (UNUSED) SHOP EQUIPMENT 1 A 11 FABRIQUE 5'W x 5'H x 10'L Bumper Pull S/A Enclosed Trailer, VIN-AV3001, 205/75R15 Tires 1 A 12 TEREX RL4000 Light Tower w/leroy SOMER 6.5KW Gen p/b KUBOTA 3-Cyl Diesel Eng, Telescoping Tower w/(4) Light Fixtures, on S/A Enclosed Skid 5 B 13 (5-3) HOTSY High Pressure Hot Water Pressure Washer, Mtd on Shop Cart (REBUILT) 1 A 14 SULLIVAN PALATEK 20HP Rotary Air Compressor p/b 20HP Elec Motor, Air Volume Tank (17863) 1 A 15 SULLIVAN PALATEK 20HP Rotary Air Compressor p/b 20HP Elec Motor, Air Volume Tank (17864) 1 A 10 MF Type D 3000# Mud Gauge (UNUSED) 1 2

5 FORD DUMP TRUCK 5 B 16 (x) (5-1) 1991 FORD F-350 S/A Dump Truck, VIN- 2FDLF47MXMCA61393, p/b 7.3L Diesel Eng, 4-Spd Manual Trans, 8'W x 8'L V-Bottom Dump Bed w/6-compartment Toolboxes, Tires, Budd Wheels, 44,955 Miles ATLAS COPCO RD20 RIG PACKAGE 4 L 17 ATLAS COPCO Rig Package, Lots 18 thru 21 4 L 18 (x) 2007 ATLAS COPCO RD20III Top Drive Drilling Rig, S/N , p/b CUMMINS QSK19 Diesel Eng, INGERSOLL RAND 1250/350 Air Compressor, FUNK Gearbox & Hyds, I. RAND 51'H 120,000# SHL Stiff Hyd Raised Mast, 30,000# Pulldown w/top Drive Gearbox, Cushion Sub, (2) Hyd Utility Winches, 3-1/2" Rotary Hose, 7-Rod Carrousel, Driller's Control Station, Mtd on 2007 CCC 5-Axle Carrier, VIN- 1CYDGV5817T047974, p/b CAT C- 13 Diesel Eng, S/N-KCB60794, EATON 8-Spd Trans, Sgl Man Cab, (5) Hyd Leveling Jacks, CAT 2520 Triplex Mist Pump, Hyd Powered Folding Work Platform, Non Rotating Table w/split Master Bushing, Downhole Lubricator Pump, Elec Power, 425/65R22.5 Front & 11R22.5 Rear Tires, 853 Meter Miles on Carrier, 6540 Meter Hours on Deck Eng (NOTE: Top Drive & Air Compressor Drilled 1 Hole Since Rebuild) 3 4

6 4 L 19 ARIEL JGQ/2 Air Booster, S/N- F25790, w/3.875 x 3" Stroke Cyls, Air Cooler p/b CAT C-7 250HP Diesel Eng, S/N- JTF01443, w/air Starter, Radiator, Master Skidded 4 L 20 SULLAIR 900XXH/1150XHDLOFCABOM Rotary Air Compressor, S/N , w/air Volume Tank p/b CAT C-15 Diesel Eng, S/N-JRE05148, w/elec Starter, Radiator, Gauges, Master Skidded (1376 Eng Meter Hours) 4 L 21 NATIONAL IDEAL C-150 Duplex Mud Pump, 6-3/4" x 12" w/cast Steel Fluid End, Bolted Caps, Surge Chamber, 2" Shear Relief Valve, Suction p/b DETROIT Series 40 Diesel Eng w/radiator, Gauges, PTO Clutch, Belt Driven, (3) 3" Steel Flex Hoses & Suction Hose, Master Skidded Rig Package Piecemeal Total: $ S&S CROWN 750 RIG PACKAGE 4 E 22 CROWN 750 Rig Package, Lots 23 thru 41 4 E 23 (x) 2008 STEWART & STEVENSON/CROWN "Duke" CE750SD Drwwks, LEBUS f/1-1/8" Line, EATON 30" Water Cooled Brake, Crown-O-Matic p/b DETROIT Series L 665HP Diesel Eng w/elec Starter, Radiator, Gauges, ALLISON 6610A Trans, CROWN 118'H 350,000# SHL Telescoping Mast, S/N-03M122508, 6-Sheave Crown Block, (2) Hyd Scoping Rams, (2) Hyd Raising Rams, Racking Board, Kelly Hose, Type FS Wt Indicator, NATIONAL 175- Ton Block/Hook Combo, Mtd on S&S CROWN 6-Axle Back-In Carrier, VIN- 1095T , w/sgl Man Cab, (2) Hyd Utility Winches, Hyd Tong Cyls, (4) Hyd Leveling Jacks, Brake Water Cooling Radiator p/b 15HP Elec Motor, 445/65R22.5 Front & 12R22.5 Rear Tires, Budd Wheels, 1-1/8" Drill Line w/spool & Stand (NOTE: $15, Will be Added to Lot Price f/national Block/Hook & Type FS Wt Indicator, Stroke Counter Which Will Not be Removed) 5 6

7 4 E 24 14'H x 9'W x 18'L Hyd Raised Substructure w/(2) 5'W Folding Walkways, SALEM 27-1/2" x 53-1/4" Rotary Table w/split Master Bushing, Chain Drive Box, Handrails & HPU, Skidded 4 E 25 9'W x 8'H x 42'L Mud Boat, (2) 9'W x 32'L & (1) 8'W x 16'L Steel Rig Mats 4 E 26 36"H x 7'6"W x 46'L Sgl Suction Catwalk w/v-door Ramp 4 E 27 FLUID DESIGN SOLUTIONS 1510BTRS-Y 150-Ton Top Head Drive, S/N-GLS00471, w/set of 1-3/4" x 84"L Elevator Links & 2- Section Track 4 E 28 FLUID DESIGN SOLUTIONS HPU p/b CAT C HP Diesel Eng, S/N-GIS004, w/elec Starter, Radiator, Gauges, DENNISON Hyd Pumps, Hyd Receiver Tank, (2) Hyd Coolers, Hyd Powered Hose Reel w/hoses, Skidded w/driller's Control Box (NOTE: REMOVAL CHARGE ON CONTROL BOX $50.00) 4 E 29 MARATHON 572RSL KW 480-Volt Gen p/b DETROIT Series L 685HP Diesel Eng w/elec Starter, Radiator, Gauges, Skidded, CAT LC5 225KW 480-Volt Gen p/b CAT C- 9 Diesel Eng, S/N-S9L02060, 369HP w/elec Starter, Radiator, Gauges, Skidded, Mtd in 9'W x 40'L Gen House w/siemens Elec Control Panels, SIEMENS 225KVA Transformer, Skidded 4 E 30 MUD KING MPZ HP Triplex Pump, 4-1/2" x 7", S/N- P06018, w/forged Steel Fluid Ends & Quick-Change Caps, 5000# Pulsation Dampener, MF 6000# Type D Pressure Gauge, MISSION 5" x 6" Charging Pump, Rod Oiler Pump, Belt Driven, Suction Screen, Bullwheel & Belts p/b CAT C HP Diesel Eng, S/N- TWM00838, w/elec Starter, Radiator, Gauges, ALLISON DP8962 Trans, S/N , O'DRILL 3" Shear Relief Valve, (3) 4"ID Vibrator Hoses & Suction Hose, Master Skidded 7 8

8 4 E 31 MUD KING MPZ HP Triplex Pump, 4-1/2" x 7", S/N- P08083, w/forged Steel Fluid Ends & Quick-Change Caps, 5000# Pulsation Dampener, O'DRILL 6000# Pressure Gauge, COBRA 5" x 6" Charging Pump, Rod Oiler Pump, Belt Driven, Suction Screen, Bullwheel & Belts p/b CAT C HP Diesel Eng, S/N-TWM0085, w/(2) Elec Starters, Radiator, Gauges, ALLISON DP892 Trans, S/N , Master Skidded 4 E 32 10'W x 6'H x 40'L 420-Bbl Crimped Steel Mud Shaker Tank w/(4) Compartments, 7'L Porch, Top-Mtd Walkways, Slant Bottom, Skidded 4 E 33 10'W x 6'H x 34'L 363-Bbl Crimped Steel Mud Suction Tank w/(2) Compartments, 10'L Covered Porch, (3) 10HP Mud Agitators, COBRA 5" x 6" Centrifugal Pump p/b 50HP Elec Motor, Mud Hopper, Skidded 4 E 34 (2) DERRICK COBRA 4' x 6' Linear Motion Shale Shakers 4 E 35 (2) DERRICK COBRA 4' x 6' Linear Motion Shale Shakers (NOTE: 1 w/o Motors) 4 E 36 7'11"W x 20'L Top Doghouse w/5'9"l Front & 4'L Back Porches & 4'L Junk Box, Knowledge Box, Bench & Cabinet Storage, (4) Lockers, Fluorescent Lights, Stairs & Safety Rails, Mtd on 34'L Skid, 6'W x 7'7"H x 6'L Petisol Platform w/safety Rails 4 E 37 7'10"W x 32'L 2-Room Bottom Parts/Change House w/(4) Hyd Cyls f/raising/lowering Top Doghouse, Change House w/(12) Lockers, Bench Storage, FORUM 2" x 3" Centrifugal Pump p/b 5HP Elec Motor, 22"W x 6'H x 8'L 15-Bbl Brake Water Tank, Fluorescent Lights, Elec Heat, Parts Room w/work Bench, Parts Cabinet, 3- Compartment Lubester 4 E 38 FLAMESHIELD 8'Dia x 22'L Gal Secondary Containment (Dbl Lined), Fuel Tank w/7'l Parts Room, Fuel Transfer Pump, Skidded 4 E 39 8'W x 7'H x 30'L 300-Bbl Crimped Steel Water Tank w/(2) 5'L Covered Porches, LITTLE GIANT Wash Down Pump, Skidded 9 10

9 4 E 40 8'W x 3'6"H x 8'6"L Junk Box w/8'w x 32'OAL Skid 4 E 41 8'W x 40'L Shale Shaker/Handrail Transport, (6) 2'W x 8"H x 20'L, (1) 2'W x 8"H x 10'L & (1) 2'W x 8"H x 5'L Suitcases Rig Package Piecemeal Total: $ NATIONAL OILWELL 610M DRWWKS 1 A 42 NATIONAL OILWELL 610M 750HP S/D Drwwks, S/N-H3222, LEBUS Grooved f/1-1/8" Line, Catheads, Crown-O-Matic, Overrunning Clutch, WICHITA Water Cooled Disc Brake, Driller's Panel, (2) In-Line Compounds p/b (2) CAT C HP Diesel Engs, S/Ns- WTH01847 & N/A, w/air Starters, Radiators, Gauges, Ea w/national OILWELL C Torque Converter, Master Skidded 11 12

10 TOP DRIVES 1 A 43 TESCO HS 500-Ton Top Drive, S/N-TS110, w/bail Tilt Cyl & Grabber Box Cyls, Transport Skid (NOTE: Missing Hyd Motors) (17655) 1 A 44 TESCO HS 1100-Ton Top Drive, S/N-N/A, w/grabber Box, Cyls & Bail Tilt Cyls, on Transport Skid (15708) 1 A 45 TESCO HS 500-Ton Top Drive, S/N-TS15, w/grabber Box, Cyls, Bail Cyls, on Transport Skid (16927) 1 A 46 TESCO D4P 250-Ton HPU p/b CAT 3412 Diesel Eng w/air Starter, Radiator, Gauges, DURST 4-Pump Drive Box, Hyd Tank, Elec Panel, Hyd Cooler, Hyd Powered Hose, Reel w/hoses, Derrick Hanger, Remote Driller's Panel, Elec Heat, Fluorescent Lights, Mtd in 11'6"W x 35'L Crimped Steel Utility House, Skidded (17680, 17424, 18338, 18337, 18368) 1 A 47 VENTURE TECH 250-Ton HPU p/b CAT C HP Diesel Eng, S/N-WJH03821, w/elec Starter, Radiator, Gauges, Hyd Tank, Skidded (7359) 1 A 48 FOREMOST IND LP 300T Shock Sub (SSS: UNUSED) 1 A 49 FOREMOST IND LP 300T Shock Sub (SSS: UNUSED) 1 A 50 FOREMOST IND LP 150T Shock Sub 1 A 51 FOREMOST IND LP 150T Shock Sub 1 A 52 FOREMOST IND LP 150T Shock Sub 1 A 53 FOREMOST IND LP 150T Shock Sub 1 A 54 FOREMOST IND LP 150T Shock Sub 1 A 55 TIW Lower Kelly Valve w/4-1/2"xh Conn, 10,000# WP w/wrench (UNUSED) 13 14

11 1 A 56 TIW Lower Kelly Valve w/3-1/2"if Conn, 10,000# WP w/wrench (UNUSED) 1 A 56A TIW Lower Kelly Valve w/3-1/2"if Conn, 10,000# WP w/wrench (UNUSED) 1 A 57 TIW Lower Kelly Valve w/3-1/2"if Conn, 5000# WP w/wrench (UNUSED) 1 A 58 TIW Lower Kelly Valve w/3-1/2"if Conn, 5000# WP w/wrench (UNUSED) TRIPLEX PUMPS 1 A 59 Pump Package, Lots 60 & 61 1 A 60 NOV 10-P-130 Triplex Pump, 1300HP, Forged Steel Fluid Ends & Quick-Change Caps, MATTCO 5000# Pulsation Dampener, Suction Screen & Dampener, OTECO 10,000# Pressure Gauge, MISSION 1" x 1" Rod Oiler Pump p/b 3 HP Elec Motor, Bullwheel, Mtd on Covered Skid (13931, 10785) 1 A 61 CAT 3512C Diesel Eng, S/N- LLF00378, w/air Starter, Radiator, Gauges, NATIONAL C Torque Converter, Belt Drive Assembly, Skidded (17,386 Meter Hours) 1 A 62 Pump Package, Lots 63 & 64 1 A 63 NOV 10-P-130 Triplex Pump, 1300HP, Forged Steel Fluid Ends & Quick-Change Caps, MATTCO 5000# Pulsation Dampener, Suction Screen & Dampener, Model # Pressure Gauge, MISSION 1" x 1" Rod Oiler Pump p/b 3HP Elec Motor, Bullwheel, Mtd on Covered Skid (15386, 13288) 15 16

12 1 A 64 CAT 3512C Diesel Eng, S/N- LLF00377, w/air Starter, Radiator, Gauges, NATIONAL C Torque Converter, Belt Drive Assembly, Skidded 1 A 65 LANZOU HUATONG F-1000 Triplex Pump, 1000HP, 6-3/4" x 9", Forged Steel Fluid End, Skidded (8734) 5 B 66 (5-2) NATIONAL J-150 Triplex Pump, S/N-6910, w/cast Steel Fluid End, Bolted Caps p/b 75HP Elec Motor, Skidded PUMP POWER 1 A 67 CAT 3512C 932KW Diesel Eng, S/N-LLF00329, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (111786) 1 A 68 CAT 3512C 932KW Diesel Eng, S/N-N/A, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (11683) 1 A 69 CAT 3512C 932KW Diesel Eng, S/N-LLF00324, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (11778) 1 A 70 CAT 3512C 932KW Diesel Eng, S/N-LLF00323, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (11821) 1 A 71 CAT 3512C 932KW Diesel Eng, S/N-LLF00336, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (11876), (12,302 Meter Hours) 17 18

13 1 A 72 CAT 3512C 932KW Diesel Eng, S/N-LLF00328, w/oilworks C Torque Converter, Pump Drive Assembly, V-Belts, Air Volume Tank, Skidded (11784) 1 A 73 OILWORKS C Torque Converter, S/N-3352, w/internal Hub 1 A 74 OILWORKS C Torque Converter, S/N A 75 OILWORKS C Torque Converter, S/N A 76 OILWORKS C Torque Converter, S/N-4030 GENERATORS 1 A CAT SR-4B 725KW 600-Volt Gen, S/N-AFN03937, p/b CAT C- 27 Diesel Eng w/elec Starter, Radiator, Gauges, Mtd in 8'W x 30'L House, Skidded 1 A 78 (2) CAT SR-4B 545KW 480-Volt Gens, Ea p/b CAT C HP Diesel Engs, S/Ns-PIL00197 & N/A, w/elec Starters, Radiators, Gauges, Ea Skidded, Mtd in 12'W x 38'L Gen House w/ge Evolution Series E9000 Elec Control Panels, HEVI-DUTY 112.5KVA Transformer, Skidded (6928/7662) 1 A 79 (2) 2009 CAT SR-4B 545KW 480- Volt Gens, Ea p/b CAT C HP Diesel Engs, S/Ns- PIL00134 & N/A, Ea w/elec Starter, Radiator, Gauges, Skidded, Mtd in 12'W x 38'L Gen House w/(2) SULLIVAN PALATEK H40DG Rotary Air Compressors, Ea p/b 40HP Elec Motor, Air Receiver Tanks, GE Evolution Series E9000 Elec Control Panels, HEVI DUTY 112.5KVA Transformer, Skidded (6907, 7660, 7933) 19 20

14 1 A 80 (2) CAT SR-4 455KW 480-Volt Gens, Ea p/b CAT C-15 Diesel Engs, Ea w/elec Starter, Radiator, Gauges, Skidded, Mtd in 12'W x 40'L Gen House w/ge Evolution Series E9000 Elec Control Panels, ACME 112.5KVA Transformer, Skidded (6815, 6825, 18529, 15433) 1 A 81 CAT SR-4B 545KW 480-Volt Gen p/b CAT C-18 Diesel Eng, S/N- DFG03031, w/radiator, Gauges, Skidded (6899) 1 A 82 CAT SR-4B 455KW 480-Volt Gen p/b CAT C HP Diesel Eng, S/N-P1Z00261, w/elec Starter, Radiator, Gauges, Skidded (13040) 1 A 85 STAMFORD 480-Volt Gen p/b CAT 3406 Diesel Eng, S/N- 3ER09652, w/elec Starter, Radiator, Gauges, Lifting Skid (16578) 1 A 86 CAT SR-4 320KW 480-Volt Gen p/b CAT 3406 Diesel Eng, S/N- 2WB14399, w/elec Starter, Radiator, Gauges, Skidded (2472, 3133, 12396) 1 A 87 CAT SR Volt Gen p/b CAT 3456 Diesel Eng, S/N-3PG01067, w/elec Starter, Radiator, Gauges, Skidded (13042, 13040, 13038) 1 A 83 CAT SR-4B 275KW 480-Volt Gen p/b CAT 3406 Diesel Eng, S/N- 1LS00405, w/elec Starter, Radiator, Gauges, Skidded (6123) 1 A 84 CAT SR-4B 292KW 480-Volt Gen p/b CAT HP Diesel Eng, S/N-2WB17096, w/elec Starter, Radiator, Gauges, Skidded (4977) 21 22

15 DIESEL ENGINES 1 A 88 CAT 3512A Diesel Eng w/air Starter, Skidded (16328) 1 A 89 CAT 3508 Diesel Eng, S/N- LLC00128, w/air Starter, Skidded (18290) 1 A 90 CAT C HP Diesel Eng, S/N- WJH01851, w/air Starter, Radiator, Gauges (5141) 1 A 91 CAT C HP Diesel Eng, S/N- WJH01711, w/air Starter, Radiator, Gauges (13661) 1 A 92 CAT C HP Diesel Eng, S/N- WRH05382, w/air Starter, Radiator, Gauges, Skidded (5145, 1345) 1 A 93 CAT C HP Diesel Eng, S/N- WJH00438, w/elec Starter, Radiator, Gauges, Skidded (23831) 1 A 94 CAT C HP Diesel Eng, S/N- PIZ00110, w/elec Starter, Radiator, Skidded 1 A 96 DETROIT Series L 665HP Diesel Eng, S/N-06R , Skidded (8443) 1 A 97 DETROIT Series HP Diesel Eng, S/N-06RE123120, w/reliabilt DF534 2-Cyl Air Compressor (11925) 1 A 98 FUZZIES F250-CP CAT Radiator, 8'9"H x 7'9"W w/2' x 2' Oil/Fuel Cooler (13641) 1 A 99 FUZZIES F250-CP CAT Radiator, 8'9"H x 7'9"W w/2' x 2' Oil/Fuel Cooler (13640) 1 A 100 DANILEL CAT Radiator, 6'9"H x 4'9"W (19350) 1 A 101 CAT THERMODYNAMICS 3508C Radiator Assembly w/oil/fuel Cooler, 60"Dia Fan, (2) Pillow Blocks (18803) 1 A 102 GENERAL THERODYNAMICS 7'7"H x 6'6"W 2-Section Radiator, Mtd in Transport Frame (15337) 1 A 95 CAT C HP Diesel Eng, S/N- PIZ00352 (13937) 23 24

16 1 A 103 FUZZIES FZ33-CP60607 CAT Radiator, 8'H x 5'5"W & 7'7"H x 5'5"W Radiator, 60"Dia Fan, Fan Support Frame, (2) Pillow Blocks (16725) 1 A 104 Eng Radiator, 6'H x 5'W (14558) 1 A 105 ACE Air Cooled Heat Exchanger J72, S/N , w/fan & Shaft Assembly, FUZZIES F250- CP78801 Radiator, S/N-1200, 7'H x 7'3"W (15619, 13610) 1 A 106 ACME 1125KVA Transformer w/covered Lifting Skid (4051) 1 A 112 HPS 75KVA Transformer w/covered Lifting Skid (5597) 1 A 113 HEVI DUTY 75KVA Transformer w/covered Lifting Skid (17919) 1 A 114 HEVI DUTY 75KVA Transformer w/covered Lifting Skid (15687) 1 A 115 Gen End (Disassembled) 1 A 116 EM 800HP Series Type Traction Motor w/hub (17667) 1 A 107 HEVI DUTY 112.5KVA Transformer w/covered Lifting Skid ( ) 1 A 108 HEVI DUTY 112.5KVA Transformer w/covered Lifting Skid (1174) 1 A 109 ACME 1125KVA Transformer w/covered Lifting Skid (5707) 1 A 110 HPS 112.5KVA Transformer w/covered Lifting Skid (4050) 1 A 111 HPS 75KVA Transformer w/covered Lifting Skid (7959) 25 26

17 DRILL PIPE/COLLARS (Note: The Following 4 Lots of Drill Pipe Are on 2 Separate Racks, Will be Picked Up on First Come, First Served Basis, No Picking or Choosing, Some UNUSED w/papers) 4 H 117 (2077) Ft (67 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-1/2"OD (DWB, Some UNUSED w/papers, DRILCO Tubes) 4 H 118 (2077) Ft (67 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-1/2"OD (DWB, Some UNUSED w/papers, DRILCO Tubes) 4 H 119 (2077) Ft (67 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-1/2"OD (DWB, Some UNUSED w/papers, DRILCO Tubes) 4 H 120 (2077) Ft (67 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-1/2"OD (DWB, Some UNUSED w/papers, DRILCO Tubes) (Note: The Following 4 Lots of Drill Pipe Are on 2 Separate Racks, Will be Picked Up on First Come, First Served Basis, No Picking or Choosing, Only Drilled 3 Wells Since NEW) 4 H 121 (2015) Ft (65 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-3/8"OD to 6-7/16"OD 4 H 122 (2015) Ft (65 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-3/8"OD to 6-7/16"OD 4 H 123 (1984) Ft (64 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-3/8"OD to 6-7/16"OD 4 H 124 (1953) Ft (63 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-3/8"OD to 6-7/16"OD 4 H 125 (1550) Ft (50 Jts) 5", 19.50#, G- 105, Rng 2 Drill Pipe w/4-1/2"if Tool Jts, 6-3/8"OD to 6-7/16"OD (From the Previous 4 Lots, 50 Jts Were Randomly Picked Out f/inspection) 27 28

18 (Note: The Following 2 Lots Located on Same Rack, Pickup Will be First Come, First Served, No Picking or Choosing) 2 A 126 (5934) Ft (138 Jts) 5", 19.50#, S- 135, Rng 3 Drill Pipe w/4-1/2"if, HB, 6-1/2"OD Avg on Box, Avg Length 43' 2 A 127 (5891) Ft (137 Jts) 5", 19.50#, S- 135, Rng 3 Drill Pipe w/4-1/2"if, HB, 6-1/2"OD Avg on Box, Avg Length 43' 7 D 132 (5762) Ft (134 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (DWB) 7 D 133 (5762) Ft (134 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (DWB) 7 D 134 (8385) Ft (195 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (YB) 7 D 128 (946) Ft (22 Jts) 5", 19.50#, G- 105, Rng 3 Drill Pipe w/4-1/2"if, HB, 6-1/4"OD Avg on Box (YB) 4 H 134 A 7-1/2"OD x 25'L Bladed Stabilizer w/2-7/8"if to 4-1/2"Reg Conn (UNUSED) 7 D 129 (5805) Ft (135 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (DWB) 7 D 130 (5795) Ft (135 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (DWB) 7 D 131 (5762) Ft (134 Jts) 4-1/2", 16.60#, G-105, Rng 3 Drill Pipe w/4-1/2"xh, 6-1/4"OD Avg on Box (DWB) 4 H /8"OD x 2-3/4"ID x 30.07'L Spiral Drill Collar w/4-1/2"if Conn, SR 4 H /16"OD x 2-3/4"ID x 30.21'L Slick BH Drill Collar & Bored f/float w/6-5/8"reg Conn, SR 4 H /8"OD x 2-3/4"ID x 29.10'L Slick Drill Collar w/6-5/8"reg Conn 4 H /4"OD x 2-3/4"ID x 27.60'L Slick Drill Collar w/6-5/8"reg Conn 29 30

19 4 H /8"OD x 2-1/2"ID x 30.15" Slick Drill Collar w/4-1/2"xh Conn, SR 4 H /16"OD x 2-3/8"ID x 30.45'L Drill Collar w/4-1/2"xh Conn, SR 4 H /16"OD x 2-3/8"ID x 30.95'L Drill Collar w/4-1/2"xh Conn, SR 4 H /16"OD x 2-3/4"ID x 29.65'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/4"ID x 30.23'L Drill Collar w/4-1/2"xh Conn, SR 4 H /2"OD x 2-3/4"ID x 30.75'L Drill Collar w/4-1/2"xh Conn, SR 4 H /16"OD x 2-3/4"ID x 29.35'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/8"ID x 30.66'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/4"ID x 29.70'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/4"ID x 29.61'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/4"ID x 29.63'L Drill Collar w/4-1/2"xh Conn, SR 4 H /8"OD x 2-3/4"ID x 30.63'L Drill Collar w/4-1/2"xh Conn 4 H 151 6"OD x 2-3/8"ID x 29.35'L Drill Collar w/4-1/2"xh Conn 4 H /16"OD x 2-3/8"ID x 29.96'L Drill Collar w/4-1/2"xh Conn 4 H /8"OD x 2-3/4"ID x 30.25'L Drill Collar w/4-1/2"xh Conn 4 H /16"OD x 2-7/16"ID x 29.47'L Drill Collar w/4-1/2"xh Conn 4 H /16"OD x 2-3/8"ID x 29.70'L Drill Collar w/4-1/2"xh Conn 4 H 156 6"OD x 2-3/8"ID x 29.05'L Drill Collar w/4-1/2"xh Conn 4 H 157 6"OD x 2-3/8"ID x 29.70'L Drill Collar w/4-1/2"xh Conn 4 H 158 6"OD x 2-3/8"ID x 29.54'L Drill Collar w/4-1/2"xh Conn 4 H 159 6"OD x 2-3/8"ID x 29.86'L Drill Collar w/4-1/2"xh Conn 31 32

20 2 A /16"OD x 2-3/8"ID x 27.70'L 2 A /8"OD x 2-3/8"ID x 28.90'L 2 A /8"OD x 2-1/2"ID x 29.15'L 2 A /16"OD x 2-3/8"ID x 29.50'L 2 A /16"OD x 2-3/8"ID x 29.17'L 2 A /8"OD x 2-1/2"ID x 28.42'L 2 A /16"OD x 2-3/8"ID x 28.02'L 2 A /16"OD x 2-3/8"ID x 28.92'L 2 A /8"OD x 2-1/2"ID x 26.20'L 2 A /16"OD x 2-3/8"ID x 28.72'L 2 A /8"OD x 2-3/8"ID x 28.87'L 2 A /16"OD x 2-3/8"ID x 29.00'L 2 A /4"OD x 2-1/2"ID x 29.08'L 2 A /8"OD x 2-1/2"ID x 29.44'L 2 A /4"OD x 2-1/2"ID x 27.52'L 2 A /8"OD x 2-3/8"ID x 27.98'L 33 34

21 2 A /4"OD x 2-3/8"ID x 27.96'L 2 A /8"OD x 2-3/8"ID x 29.95'L 4 H /2"OD x 2-3/8"ID x 27.84'L SR 4 H /2"OD x 2-3/8"ID x 29.70'L SR 4 H /2"OD x 2-3/8"ID x 29.65'L SR 4 H /2"OD x 2-3/8"ID x 30.08'L 4 H /2"OD x 2-3/8"ID x 30.04'L 4 H /2"OD x 2-1/2"ID x 29.91'L Slick Drill Collar w/4"fh Conn 4 H /2"OD x 2-3/8"ID x 29.54'L HB 4 H /16"OD x 2-1/2"ID x 29.38'L 4 H /8"OD x 2-3/8"ID x 29.90'L 4 H /16"OD x 2-3/8"ID x 30.15'L 4 H /16"OD x 2-3/8"ID x 29.02'L 4 H /8"OD x 2-1/2"ID x 28.75'L 4 H /16"OD x 2-3/8"ID x 29.95'L 4 H /2"OD x 2-3/8"ID x 28.85'L 35 36

22 4 H /2"OD x 2-1/4"ID x 29.10'L 4 H /2"OD x 2-3/8"ID x 29.53'L 4 H /2"OD x 2-1/4"ID x 28.88'L 4 H /8"OD x 2-1/4"ID x 28.71'L 4 H /16"OD x 2-1/4"ID x 30.15'L 4 H /2"OD x 2-1/2"ID x 29.99'L SR 4 H /8"OD x 2-1/2"ID x 30.15'L 4 H /16"OD x 2-1/2"ID x 28.97'L 4 H /2"OD x 2-1/2"ID x 29.62'L 4 H /2"OD x 2-1/4"ID x 29.97'L 4 H /2"OD x 2-1/4"ID x 30.10'L 4 H /2"OD x 2-1/4"ID x 29.83'L 37 38

23 CASING LAYDOWN TRUCKS 3 J 204 (x) 2004 FREIGHTLINER T/A Casing Laydown Machine Tractor, VIN- 1FUJA6CK74LN36863, 232" WB p/b DETROIT Series L Eng, S/N-6R , EATON 10- Spd Trans, PTO, Air Ride, Sgl Man Operator's Cab, PULLMASTER 50,000# & 30,000# Winches, Hyd Hoses, Trough, (2) Catwalk Hyd Operated Casing Beams w/kick Arms, 315/65R22.5 Front & 11R22.5 Rear Tires 3 J 205 (x) 2005 MACK CXN613 T/A Casing Laydown Machine Tractor w/sleeper, VIN- 1M1AK07Y05N001654, 204" WB p/b MACK E7 Eng, EATON 10- Spd Trans, PTO, Air Ride, Sgl Man Operator's Cab, GEARMATIC 50,000# & 30,000# Winches, 14'L Trough, 315/80R22.5 Front & 11R22.5 Rear Tires TRUCK & TRAILERS 5 C 206 (x) (5-5) 2008 MACK Pinnacle T/A Truck Tractor, VIN- 1M1AW02Y58N001309, p/b MACK MP-7 Diesel Eng, EATON FULLER 13-Spd Trans, 176" WB, Sliding 5th Wheel, Air Bag Susp, 11R22.5 Tires, Budd Wheels 5 C 207 (x) (5-9) 2007 DRAGON 130-Bbl T/A Self Contained Vac Trailer, VIN-1UNST42287L052778, FRUITLAND Vac Pump p/b Hyd Motor, Side-Mtd Walkway, 11R24.5 Tires, Budd Wheels 3 J 208 (x) ALLWAYZ T/A Equipment Trailer, VIN-S45620W, 8'5"W x 18'L w/bumper Hitch, Elec Brakes, Landing Gear, 16" Tires 3 J 209 (x) ALLWAYZ T/A Equipment Trailer, VIN-S45688W, 8'5"W x 18'L w/bumper Hitch, Elec Brakes, Landing Gear, 16" Tires 3 J 210 (x) ALLWAYZ T/A Equipment Trailer, VIN-S45640W, 8'5"W x 12'L w/bumper Hitch, Elec Brakes, Landing Gear, 16" Tires (NOTE: Damaged Neck) 39 40

24 5 O 211 (x) (5-11) 1998 ROCKWOOD T/A 20,000# Equipment Trailer, VIN- 1R9GD2824WM266212, 8'2"W x 23'L w/5'l Dovetail & 4'L Folding Ramps, Pintle Hitch, Elec Brakes, 16" Tires 5 C 212 (x) (5-7) 1988 SP CONSTRUCTION 8'W x 42'OAL T/A Drop Deck Trailer, VIN- SW25533PA, w/12'l Top Deck, 30'L Load Deck, Tires, Dayton Wheels 5 C 213 (x) (5-8) 1979 STRICK 8'W x 40'L T/A Oilfield Float, VIN , w/tailroller, (8) Strap Ratchets, Landing Gear, 11R22.5 Tires, Dayton Wheels 5 O 214 (x) (5-12) 1977 JWS T/A Oilfield Float, VIN-116, 8'W x 32'L w/rolling Tailboard, 11R22.5 Tires, Dayton Wheels 5 C 215 (5-6) 1971 VERI 8'W x 40'L 3-Axle Trailer, VIN , w/landing Gear, Toolboxes, 10.00R20 Tires, Dayton Wheels FRAC TANKS 5 B 216 (5-16) 500-Bbl S/A Frac Tank w/stairs, Tires, Budd Wheels 5 B 217 (5-17) 500-Bbl S/A Frac Tank w/stairs, Tires, Budd Wheels 9 M 218 DRAGON 500-Bbl S/A Frac Tank, S/N (E2) 9 M 219 DRAGON 500-Bbl S/A Frac Tank, S/N (E1) 9 M 220 DRAGON 500-Bbl S/A Frac Tank, S/N (H1) 9 M 221 DRAGON 500-Bbl S/A Frac Tank, S/N (I1) 9 M 222 DRAGON 500-Bbl S/A Frac Tank, S/N (D5) 41 42

25 9 M 223 DRAGON 500-Bbl S/A Frac Tank, S/N (D3) 9 M 224 DRAGON 500-Bbl S/A Frac Tank, S/N (E5) 9 M 225 DRAGON 500-Bbl S/A Frac Tank, S/N-N/A (F1) 9 M 226 DRAGON 500-Bbl S/A Frac Tank, S/N-4654 (E4) 9 M 227 DRAGON 500-Bbl S/A Frac Tank, S/N (D6) 9 M 228 DRAGON 500-Bbl S/A Frac Tank, S/N-5436 (G3) 9 M 229 DRAGON 500-Bbl S/A Frac Tank, S/N (G4) 9 M 230 DRAGON 500-Bbl S/A Frac Tank, S/N (F4) 9 M 231 DRAGON 500-Bbl S/A Frac Tank, S/N (H2) 9 M 232 DRAGON 500-Bbl S/A Frac Tank, S/N (H4) 9 M 233 DRAGON 500-Bbl S/A Frac Tank, S/N (H6) 9 M 234 DRAGON 500-Bbl S/A Frac Tank, S/N (F5) 9 M 235 DRAGON 500-Bbl S/A Frac Tank, S/N (D4) 9 M 236 DRAGON 500-Bbl S/A Frac Tank, S/N (F2) 9 M 237 DRAGON 500-Bbl S/A Frac Tank, S/N (H3) (NOTE: Located Across the Street From Others) 5 C 238 (5-14) MARANGO 80-Bbl Vac Tank w/frame Assembly 43 44

26 5 C 239 (5-15) MASPORT Vac Pump & TULSA 15,000# Winch 5 C 240 (5-4) 8'Dia x 4'4"H x 37'2"L 120- Bbl Half Round Tank, Skidded 5 O 241 (5-13) 8'Dia x 9'L 3000-Gal Fuel Tank WELL CONTROL EQUIPMENT 1 A 242 KOOMEY T201603S 5-Station 150-Gal Closing Unit w/(15) 10- Gal Accumulator Bottles, Triplex Charge Pump p/b 20HP Elec Motor, (2) Air-Actuated Charge Pumps, Skidded (6069) 1 A ADVANCED PRESSURE INC Station 120-Gal Closing Unit, S/N-8531, w/(12) 10- Gal Accumulator Bottles, Triplex Charge Pump p/b 20HP Elec Motor, (2) Air-Actuated Charge Pumps, Skidded (12975) 1 A 244 VALVCON 5-Station 120-Gal Closing Unit w/(12) 10-Gal Accumulator Bottles, Triplex Charge Pump p/b 15HP Elec Motor, (2) Air-Actuated Charge Pumps, Lifting Skid (2644) 1 A 245 KOOMEY 4-Station 80-Gal Closing Unit w/(8) 10-Gal Accumulator Bottles, CAT Triplex Charge Pump p/b 15HP Elec Motor, Covered Lifting Skid (12349) 45 46

27 1 A 246 HORN 5000# Choke Manifold w/(6) 4-1/16" & (2) 2-1/16" Gate Valves, Mud Gauge, Manual Choke Manifold, Mtd on Adjustable Height Skid (19417) RIG HOUSES 5 O 247 (x) (5-10) 2005 FLEETWOOD 8'W x 30'L T/A Office Trailer, VIN- 1EB1F322X , w/(5) Work Stations, (4) 2-Drawer File Cabinets 4 K 248 AMERI-TECH 11'9"W x 50'L Toolpusher's House w/living & Office Area, Climate Controlled, Skidded 1 A 249 ATCO 12'10"W x 48'L Toolpusher's House w/living & Office Area, Climate Controlled, Skidded (18037) 1 A 250 9'3"W x 30'L Top Doghouse w/knowledge Box, Remote Closing Unit Station, M-D TOTCO 750,000# Wt Indicator, Cabinet & Bench Storage, (4) Lockers, Fluorescent Lights, Elec Heat, Mtd on 11'W x 40'L Skid (2054) 1 A 251 9'W x 30'L Driller's Doghouse w/(2) 4'L Covered Porches, (2) 18"W Side-Mtd Walkways, Handrails, (6) Lockers, Knowledge Box, Work Bench, KOOMEY 4-Station Remote Closing Unit, Skidded (2055) 47 48

28 1 A '8"W x 35'L Crimped Steel Utility House w/tesco-93 Hyd Tank, Filter Bases, Elec Panel, Fan p/b 15HP Elec Motor, Misc Parts, Elec Heat, Fluorescent Lights, Skidded (16926, 16949) DRILLING COMPONENTS 1 A 253 WICHITA 30" Water Cooled Disc Brake (13564) 1 A 254 Set of Brake Flanges f/national 610 Drwwks (UNUSED) (20550 & 20551) 1 A 255 Set of Brake Bands f/national 610 Drwwks (REBUILT) 1 A 256 Set of Brake Bands f/national 610 Drwwks (REBUILT) 1 A 257 Set of Brake Bands f/national 610 Drwwks (REBUILT) 1 A 258 Set of Brake Bands f/continental EMSCO D-3 Drwwks (REBUILT) 1 A 259 Set of Brake Bands f/continental EMSCO D-3 Drwwks (REBUILT) 1 A 260 Set of Brake Bands f/gardner- DENVER 800 Drwwks (REBUILT) (f/rig #310) 1 A 261 TESCO D4P Pump Drive (UNUSED) 49 50

29 1 A 262 Top Drive Part 1 A 263 (2) GEARMATIC BG6B Hyd Hoists (NOTE: 1 Missing Motor) (12185 & 12187) 1 A 264 PARKER Hyd Hoist (15591) 1 A 265 PARKER Hyd Hoist (12189) 1 A 266 PARKER Hyd Hoist (15592) 1 A 267 (5) McKISSICK 30" TB Sheaves f/1-1/8" WL (UNUSED) 1 A 268 (6) Pallets of CAT Eng & Rig Parts, Consisting of Air After Cooler, 40" Fan Blade, Turbos, Water Piping, Exhaust Parts & Brackets, REXROTH Air Valves, Slip & Tong Dies, Misc 1 A 269 Hyd 4-Way Spiral Main Valve, 18" Air Clutch Assembly, (2) Disc Drive Rings, Dbl Sprocket Hub & Hyd Motor (23107) 1 A 270 (5) ATLAS 09.0.PB1SPF.6.00 Hyd Cyls, S/N-BB302685A, 3000PSI (UNUSED) 1 A 271 D-3 & G.D.800 Drwwks Water Spears, (3) Misc Pinion Gear Shafts, (2) Sprockets, (2) Hyd Porta Powers, (1) Air-Operated, DERRICK Super G & VIMARC Shaker Motors 1 A 272 TOSHIBA 75HP 1180RPM Elec Motor 1 A 273 WORLDWIDE 75HP 1200RPM Elec Motor 1 A HP 1200RPM Elec Motor 1 A HP 1200RPM Elec Motor 1 A 276 Pump Drive Assembly w/clutch Hub, Pillow Block Bearing & Drive Sheave 1 A 277 TIMKEN Bearing/Pillow Blocks 1 A 278 (1) 32" & (1) 28" Clutch Hubs 1 A 279 (4) Discharge Manifolds f/f-1000 Triplex 1 A 280 (2) Forged Steel Modules f/pz-11 Pumps 51 52

30 1 A 281 Forged Steel Module f/9-p-100 Pump 1 A 282 Forged Steel Module f/f A 283 (2) Quick-Change Caps & (2) Discharge Strainers 1 A 284 (3) Pallets Asst'd Pump Parts, Including Crossheads, Liners, Pump Gauge & Misc Pressure Gauges 1 A 285 (2) HT-PD # WP Pulsation Dampeners (7289, 12250) 1 A 286 NATIONAL P Ton Swivel (1594) 1 A 287 OILWELL PC Ton Swivel (17762) 1 A 291 OILWORKS 35C7 Pneumatic Pipe Spinner (15690) 1 A 292 SPINMASTER 550H Pneumatic Pipe Spinner (7913) 1 A 293 SPINMASTER 550H Pneumatic Pipe Spinner (3327) 1 A 294 8'W x 47'L Skid w/suitcases, Hyd, Elec & Water Lines, (2) 180- Deg 5'H Swinging Arms, (1) 9'L Fixed Height, (1) 45'L Raising Capabilities, 4" Mud Manifold, Chain Vise (3316) 1 A 295 8'4"W x 18'L Shaker Skid w/handrails & Roof END OF SALE 1 A 288 OILWORKS 35C7 Pneumatic Pipe Spinner (16440) 1 A 289 OILWORKS 35C7 Pneumatic Pipe Spinner (16447) 1 A 290 OILWORKS 35C7 Pneumatic Pipe Spinner (15641) 53 54

31 TERMS & CONDITIONS 1. Terms: All purchases are to be PAID IN FULL in negotiable U.S. Funds on Sale Day. Company or Personal Checks or Wire Transfers will be accepted as payment. Bank wires and company or personal checks will be accepted provided they are accompanied by a BANK LETTER OF GUARANTEE guaranteeing payment. The buyer waives the right to stop payment on any check or monies given as payment. No drafts accepted. The buyer may receive purchases upon completion and execution of all funds (check-out procedures are defined in the inside cover of auction catalog). The Auctioneer reserves the right to hold any purchases until all funds have cleared the Auctioneer s Bank and to hold ALL purchases on partial payment. A 2% late fee may be charged if payment is not received in full within 5 business days of receipt of the invoice. 2. Bidder Registration: All perspective Buyers and Bidders must register and receive a bidder number at EACH Kruse Energy & Equipment Auctioneers auction. Anyone bidding on behalf of a third party must also register to bid and will be held responsible and liable for all purchases. No person shall bid on any item they own or on behalf of the owner. No exceptions! Buyers names are to remain confidential. The Auctioneer reserves the right to refuse any person a bidder number and may revoke the bidders privileges at any time. 3. Resale of Merchandise: The Auctioneer reserves the right to reclaim any or all merchandise for any unpaid purchases in part or in full. Buyer agrees to pay any deficiencies from the initial sales price and all expenses incurred including attorney s fees on merchandise that must be resold. In the event a buyer chooses to resale a lot, they must make up any deficiencies from the initial sales price. The resale of any merchandise is at the sole discretion of the Auctioneer. Any lots left over 30-days will be considered abandoned property and may be resold by Kruse. 4. Sales Tax: Buyer agrees to pay all applicable sales tax on all purchases, unless the buyer provides proof of exemption that is issued by the appropriate state or local Government Agency. Buyers must meet exemption requirements of the state or local Government Agency at the location in which the auction is held. Buyer also agrees to pay any sales tax that may be assessed after payment has been received. 5. Warranty or Guarantee: Every item is sold AS IS, WHERE IS, WITH ALL FAULTS and without warranty or guarantee of any kind, either written, expressed or implied, as to merchantability or fitness for a particular purpose or otherwise. There are no warranties or guarantees as to year, make, model, serial number, condition, performance, and/or dotting & numbering, and/or digital slide production. All items are listed as accurately as possible and information is derived from sources deemed reliable. However, Buyer must inspect all items personally and accept with any faults or defects. Buyer in no way holds Auctioneer or Seller responsible for any defects, inaccuracies or errors in any way. All announcements sale day supersede any printed material. Your bid indicates you have previously inspected the lot and your know what you are bidding on. 6. Contested or Tie Bid/Lotting: In the event two (2) or more parties claim the same bid at the fall of the Auctioneer s gavel (sold), the Auctioneer may re-open the sale and commence the bidding between said parties until a high bidder and new owner is established. This is entirely at the sole discretion of the Auctioneer and he may elect not to re-open the bidding if he deems the bid was late and the item was considered sold. The Auctioneer may also refuse any bid he deems as a mere fractional advance. The Auctioneer reserves the right to group, withdraw or break-apart any lot he determines is necessary. 7. Indemnification & Hold Harmless/Injury & Damages: Bidders and their agents, employees or representatives agree to hold harmless Kruse Energy & Equipment Auctioneers, its agents, employees or representatives along with the same for the Seller for any damages, injury or death occurring on or near the auction site. The auction site shall include any yard or location at which any lot is located as well as the actual location where the bid calling is conducted. The Bidder agrees to enter any site at their own risk. No person shall have any claim against Kruse Energy & Equipment Auctioneers, its agents, employees or representatives along with the same for the Seller or Site Owner for any injury, damages or loss of life which may occur from any cause or nature. The Buyer also agrees to the same terms for load-out and check-out on all auction sites and will provide insurance where applicable. 8. Titles/Bills of Sale: All Titles and Bills of Sale, along with other pertinent documents will be mailed within a reasonable time period following the auction, allowing for satisfactory collection of all negotiable funds. Delivery of such documents is subject to receiving the documents from the Seller. Kruse Energy & Equipment Auctioneers is acting as agents only and any loss of title must be reconciled either through the Seller or the appropriate Government Agency. 9. Agreement: This Agreement is between the Bidder and the Auctioneer (Kruse Energy & Equipment Auctioneers, LLC) and shall be governed by and interpreted by the laws of the State of Texas. 10. Administrative Fee: A 2.5% Administrative Fee will be charged on all purchases. An additional Fee will be charged if Internet bidding is available, see website for details. 11. Load-Out/Transportation Disclaimer: Kruse Nor The Seller(s) Are Involved In Arranging Load-Out or Transportation Services On Behalf of Buyer(s). All Load- Out and/or Transportation Charges/Arrangements Are The Responsibility of Buyer(s). Kruse Nor the Seller(s) Are To Be Considered The Shipper, The Consignor Or The Consignee. Additionally, Kruse Nor The Seller(s) Have Any Contractual or Agency Relationship With Buyer(s) For Any Load-Out Or Transportation Services. 12. Charges for Late Pickup of Lots: All lots must be removed during posted Checkout Period. Checkout dates for each yard are listed in the YARD DIRECTIONS & CHECK-OUT INFO section. Charge for late pickup is $25.00 per lot, per day.