Sparta Engineering Inc. Catalogue
|
|
- Elinor Cleopatra Gibbs
- 6 years ago
- Views:
Transcription
1 2013 Sparta Engineering Inc. Catalogue
2 Truck Mounted Single Service Rig TMS API 4f 3rd Edition Yes** Period One legal Yes** Rig Weights (Fully Dressed) Front: 16,800 kg. Rear: 24,000 kg** Capacity lb (53,376 dan) Height 69 ft (21 m) Minimum Design Temperature -20 C Carrier Axle Configuration Tandem Steer / Tridem Drive Tires Steer: 445R22.5's Drives:12R22.5's Chassis International Paystar 5900i (other trucks optional) Wheelbase 378 in (Front steer-to-centre drive) Steer axle spread 72 in Transfer Case Fabco PTO Mast stiff-single Mast Height 69 ft (21 m) API Capacity 120,000 lbs (53,376 dan) on 40lines Free-standing Free-standing or Guyed (with free-stand equipped) Maximum rated design wind velocity 85 mph without setback. 70 mph with setback Drill Line Size 7/8" or 1" Racking Board Height 27 ft (8.23 m) Rod Basket Height 54-3/4 ft (16.69 m) Racking Board Capacity 18,700 dan (21 short tons) Rod Basket Capacity 8,400 dan (9.45 short tons) - Max 1" rods Crown Sheaves 3 of 24" steel sheaves and 1 of 22" steel sheave Well spacing 5 ft (1.52 m) Fall Arrest at Crown Yes Fall Arrest Above Rod Board Yes Central Grease Yes Traveling Block 75-ton Drawworks -- See Drawworks data sheet FAST450 42x10 Band, FAST450DB (2x48in Disc), FAST450LW Drill Line Size 7/8" or 1" Sandline Capacity of 9/16" 10000ft (3048 m) or 5000ft (1524 m) on FAST450LW Sandline Capacity of 1/2" Swaged ft (3657 m) Features Free-stand Turnbuckles Aluminum Winches 2 on rig deck Man Rider Winch Optional Rod Accelerator Optional Tong Swivel-Mount Optional BOP-Slide (rear-mount) Optional Accumulator Class 2 with Class 3 accommodations ** dependent on rig configuration and equipment 2
3 Truck Mounted Double Service Rig Note: This service rig has additional services which include: Man Rider Winch, remote monitoring, replacing components, training, manuals, maintenance, etc. Capacity lb Height 105 ft Quality Product Specification Requirements Minimum Design Temperature -35 C Carrier Type Tandem Steer/Tri Drive Engine Type Cummins QSL 9 Transmission Allison 4700 OFS Drop Box Namco Substructure Maximum rated static hook load lb on 6 lines (890 KN) Maximum rated static hook load lb on 4 lines (667 KN) Maximum rated design wind velocity 70 mph Mast Type Guying Single Telescoping Double, Telescoping Triple, Cantilever Triple Free Stand, guying required (internally), mast set-up distance 6 ft Wire Rope Size Sand line 1/2" Swaged Drill line 1 Shaw Standard API 9A Service Rig Tubing Board Pipe Diameter 4.5" Rod Basket Rod Diameter 1" Crown 5 Sheaves 4 sheaves diameter 24" 1 sheave diameter 22" Hydraulic Systems Primary Rig Hydraulics Secondary - Drawworks DW450 Sparta Engineering Inc. Main Drum Braking 42" X 10" band Sandline braking Kobelt air actuated Main drum backup Kobelt Winch (2 Sub frame) Braden BG6B Traveling Equipment Block Size 100 ton Weight 1 ton / 2200 lbs Standard Mckissick API 8A 3
4 Catwalk Capacity Working mode off Length Width Height Working mode on Length Width Height lbs per arm, uniformly distributed load 44 ft. 8 ft ft. 44 ft ft ft. 4
5 Drawworks Max Input HP Rating Single Line Pull Max Hook with 4- lines Max Hook Load with 6 - lines FAST450 (BAND)/ FAST450DB (DISC) 450 HP / 336 Kw lb / dan lb / dan lb / dan Main Drum Diameter X Width 18 X 36 Wire Line Size 1 or 7/8 Drum Clutch PO324 Drive Chain Triple 100 Brake System Brake Cooling Dual 48 Disc / 42 X 10 Band Auxiliary Brake (optional) 40 (in) Disc Sand line Drum Diameter X Width X 36 Drive System Polychain or triple 100 Brake System Single Disc 40 Capacity Capacity 9/16 (in) Wire Rope Weight and dimensions Air ft ft FAST450 (Band brakes w / Triple 100 Drive Sandline) 6758 kg / lb FAST450 DB (Disc brakes w/ Polychain Drive Sandline) 7048 kg / lb Length Width 105 Height Standard Features Main drum chain tensioner Sandline Polychain Tensioner (Polychain Drive) Cable grooving machined in main drum barrel Dual-Output, 3:2 Reducing Right Angle Gearbox Central greasing 5
6 Mud Tank Fluid Capacity 8384 gallon (32 m 3 ) Length ft Width 8.83 ft Height 8.58 ft Material options Frame Materials Requirements QT-100 high strength steel frame (100 kpsi) Decking Type/material Fiber grating upper deck Piping Requirements Suction Line 4" gate valve on suction (Operating Pressure 100 psi) Steam Line 2" Inlet 2" (Operating Pressure 5000 psi) Line Pipe 2" (Operating Pressure 6000 psi. Test certs to be provided; Length required Pipes Pipes Pipes Pipes Valve Type (gate or butterfly) Degasser Options Remote monitoring Handrails (height and style) Tank gage type Lifting Requirements 18 lengths X 20 ft 2 lengths X 10 ft 2 lengths X 6 ft 2 lengths X 4 ft Butterfly valves 4" for each chamber. Equalizer valve between sections and 4 internal valves for each chamber. Box style degasser Inlet feed diameter 2 Available Collapsible Float gage 4 ft. light top of gage board Safety cables - Pipe Racking Requirements: Racking for 240 lengths - 6
7 Drilling Mud Tank Fluid Capacity gallons (81.5 m 3 ) Length Width Height Quality Product Specification Requirements Frame Materials Requirements Decking Type/material Options Remote monitoring Handrails (height and style) Tank gage type Lifting Requirements ft ft ft QT-100 high strength steel frame (100 kpsi) Fiber grating upper deck Available Collapsible Float gage 4 ft. light top of gage board Safety cables - Pipe Racking Requirements: Racking for 240 lengths - 7
8 Pump Truck Truck Specifications Axles numbers Tandem drive single steer Deck size Length Width 102 Live Roll 98.4 Pump Specifications SJ Triplex Plunger Pump Working pressure / flow 11 lb/min-max. Charge pump Bowie 4300 EX charge pump Handrails and stairs Hand Rail Style Collapsible Stair Details Folding stair for access to working deck Winch Tulsa H34 winch Drop Box Chelsea 859XGFJP-85XK Piping requirements Piping Pump Line Diameter 2 Operating Pressure 5000 psi 8
9 Contact You can reach us at the following three locations: Canada Matt Fox, P. Eng. CEO, Sparta Engineering Inc. Linden, Alberta: 702 1st Avenue NW Box 365 Linden AB, T0M1J0 Ph: FX: Jason Thompson, P. Eng. VP, Sparta Engineering Inc. Grand Prairie, Alberta: Street Clairmont, Alberta, T0H-0W0 Ph: FX: México Ing. Gabriela Ulloa. Manager Mexico, Sparta Engineering Inc. Toluca, México: Carretera México-Toluca Km. 50 A un costado de la VW de Lerma Lerma, México Of: (52) Cel.: (52 1) Cel. Canada:
10
RIGS LOADCRAFT INDUSTRIES, LTD. WORKOVER. drawworks PARTS/SERVICE. mud systems (80 0 ) L O A D C R A F T I N D U S T R I E S, LT D.
LOADCRAFT INDUSTRIES, LTD. WE BUILD RIGS. L O A D C R A F T I N D U S T R I E S, LT D. RIGS drawworks WORKOVER mud systems PARTS/SERVICE (80 0 ) 8 0 3-018 3 3811 N. BRIDGE B R A D Y, T E X A S 7 6 8 2
More informationCarrier Options Drawworks Model 750/ Main Drum Controls and Hydraulic System Sandline Drum Options Drawworks Options
Drawworks Model 750/4212-42 Main Drum > Demountable, forged steel brake rims are 42" diameter x 12" > Brakes are cooled by circulating water > Drum shaft diameter is 6 1/2" > Single line pull is 45,000
More informationWith its new PACE -B Series Rig, Nabors continues to advance industry standards in drilling technology and innovation.
PACE -B Series Rig With its new PACE -B Series Rig, Nabors continues to advance industry standards in drilling technology and innovation. Introducing the PACE -B Series Rig D r a w w o r k s The new PACE
More informationHH102. Hydraulic with Caterpillar engine, for drilling oil and gas wells up to 2,000 m. 100 tf hook capacity HP triplex pumps.
HH 102 DRILLING RIG HH102 Hydraulic with Caterpillar engine, for drilling oil and gas wells up to 2,000 m 100 tf hook capacity 1000 HP triplex pumps Mongoose shakers Design and basic rig designed in accordance
More informationCOMPLETIONS AND WORKOVER RIG RIG DISCOVERY 2 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 2 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 2 Brand Wilson Power: 550 HP Year: 1982 (Repotenciado en el 2009) Double Drum: Drawworks and Sandline Drums
More informationCOMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 6 Brand Loadcraft Power: 550 HP Year: 2013 Double Drum: Drawworks and Sandline Drums : Self-propelled Land
More informationRig 1 Sky top 4 Axle Carrier 6500 Drilling Depth
Rig 1 Sky top 4 Axle Carrier 6500 Drilling Depth Series 60 Detroit Diesel Engine Allison 5860 Transmission (1)125 KW Generator (1)75 KW Generator Sky Top 4210 (470HP) 1 Drill Line 95 105 Ton Double Telescoping
More informationCOMPLETIONS AND WORKOVER RIG RIG DISCOVERY 4 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 4 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 4 Brand Taylor Power: 500 HP Year: 2004 Double Drum: Drawworks and Sandline Drums : Self-propelled Land Rig
More informationPump and Tank Unit 438
Pump and Tank Unit 438 Technical Specification Booklet 438 Weatherford. All rights reserved. 1 Contents Weatherford Pump and Tank Unit... 2 Technical Specifications... 4 Engine... 5 Transmission... 5 Axles...
More informationSCORPION DC, LLC Rig 1 Sky Top 4 Axle Carrier 6500 Drilling Depth
SCORPION DC, LLC Rig 1 Sky Top 4 Axle Carrier 6500 Drilling Depth Series 60 Detroit Diesel Engine Allison 5860 Transmission (1) 125 KW Generator (1) 75 KW Generator Sky Top 4210 (470HP) 1 Drill Line 95
More informationMast Height ft (45.0 m) Free Working Height 98.4 ft (30.0 m) Mast Base 21.3 ft (6.5 m) x 24.6 ft (7.5 m)
General Fast Moving Triple Rig Max. Hoisting Capacity Max. Drilling Depth 24,600 ft (7,500 m) Operating Tubulars Range II - Triple Overall Rig Height 180.4 ft (55.0 m) Transportation Street Legal Loads
More informationPORTABLE DRILLING RIG ***NEW LISTING*** Make an Offer Drill Depth to 6,000'
PORTABLE DRILLING RIG ***NEW LISTING*** Make an Offer Drill Depth to 6,000' DRILLING UNIT WILSON Mogul 42B D/D Back In Drlg Unit, S/N 10623423510ADT, LEBUS Grooved f/1 Drill Line, 9/16 Sand Line, Catwheel,
More informationIdeco - H25 Information Document
Ideco - H25 Information Document CONTENTS Ideco H25 Drilling Rig Inventory... 1 Auxiliary Equipment... 3 Well Control Equipment... 3 Drill String Primary and Secondary String, API Premium Grade... 4 Rig
More information750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM
750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM PAGE 1 OF 7 DRAWWORKS: TSM 7000 Drawworks, 750hp, grooved f/1-1/8 Drill Line, p/b 540HP CAT C-15, w/allison CLT- 6061 Automatic Transmission, Right Angle Drive,
More informationVDD 400 Offshore Super Single - Automated Pipehandling System
Chapter 1 - General General Rack and Pinion Max. Hoisting Capacity 400 short tons (363 metric tonnes) Max. Pushing Capacity 100 short tons (91 metric tonnes) Max. Drilling Depth 16,500 ft (5,000 m) Operating
More informationOilRigsNow.com Houston,TX USA (713)
Current DRAWWORKS: WILSON Mogul Single Drum Drawworks S/N 5131, Lebus Grooved f/ 1-1/8 Line, WILSON Torcair Brake, FOSTER/AMERICAN Catheads, Air Drillers Control Console, Crown-O-Matic. COMPOUND: EMSCO
More informationVDD 200 Super Single Rig - Automated Pipehandling System
Chapter 1 - General General Rack and Pinion Max. Hoisting Capacity Max. Pushing Capacity 72.8 short tons (66 metric tonnes) Max. Drilling Depth 11,480 ft (3,500 m) Operating Tubulars Range III - Singles
More informationTOUGH, COMPACT, AND DURABLE
MOBILE DRILLING RIG WITH 700 HP DRAWWORKS TOUGH, COMPACT, AND DURABLE Serving the Drilling Industry for Over 75 Years SPENCER HARRIS HISTORY Spencer Harris Began in 1934 as a Job Shop Serving the East
More informationVDD 370 Super Single Rig - Automatic Pipehandling System
Chapter 1 - General General Rack and Pinion Max. Hoisting Capacity Max. Pushing Capacity 72.8 short tons (66 metric tonnes) Max. Drilling Depth 16,400 ft (5,000 m) Operating Tubulars Range III - Singles
More informationWP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components Drilling Rig Equipment & Components Mud Pump and Spare Parts Travelling Blocks Hooks Block Hook Units Swivels Rotary Tables WP Petroleum
More informationHOISTING EQUIPMENT AND MAST(DERRICK)
HOISTING EQUIPMENT AND MAST(DERRICK) 1. HOISTING EQUIPMENT 1.1 CROWN BLOCK The crown block consists of crown basement, fast line sheave, dead line sheave, main sheave, sand line sheave, drilling line protector
More informationNATIONAL 110 UE 1500 HP SCR
NATIONAL 110 UE 1500 HP SCR DRAWWORKS: NATIONAL 110 UE lsoohp Single Drum Drawworks, LEBUS Grooved f/1-3/8" line, Makeup & Breakout Catheads, w I PETRON Driller's Control Console, Crown-0-Motic. Drawworks
More informationDRAWWORKS/POWER MAST/SUB STRUCTURE MUD PUMPS
DRAWWORKS/POWER NATIONAL T 32 Single Drum Drawworks, S/N N/A, 400 HP, LEBUS Grooved f/1 1/8 Line, AMERICAN Makeup & Breakout Catheads, Rotary Table Drive, Quad Water Brake, Driller s Control Console w/air
More informationDRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY MODEL LP-12 NSN
TM 5-3820-256-24-6 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
More informationTECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL
TM 5-3820-256-24-1 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
More informationMcKissick 200mt. Stabbing board
MOMENTUM RIG 5 RIG TYPE AND NUMBER: Momentum 5 AGE OF RIG: DATE OF COMPLETION OF LAST CONTRACT: New 1998 delivered May 2003. Working for Karasu At Present DRAWWORKS Make and Model Cooper 750 Carrier #
More informationRD20/RD20XC/APL Drill Rigs. Oil and Gas Drilling
RD20/RD20XC/APL Drill Rigs Oil and Gas Drilling 1 The Industry Standard Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance. The RD20
More informationReimpet International Corporation Ingersoll Rand 1500E Land Drilling Rig Technical Specifications
Reimpet International Corporation Ingersoll Rand 1500E Land Drilling Rig Technical Specifications Reimpet International Corporation, 1302 Miles St., Houston, TX 77015 sales@reimpetintl.com Inventory of
More informationRig 90. Rig 97. Future Technology From NOV
Rig 90 Rig 97 Future Technology From NOV 1 - The Masts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 2 - The Substructures - - - - - - - - - - - - - - - - - - - - - - - - - 2 3 - The
More informationOil Rigs Now Houston, Texas
Oil Rigs Now Houston, Texas 713-570-6450 sales@oilrigsnow.com DRAWWORKS: DRILLMASTER 1200M New (2009) Single Drum Drawworks, 1,200 Hp Lebus grooved for 1-1/4 Drilling Line, Hydraulic operated Makeup &
More informationESPECIFICACIONES EQUIPO DE WORKOVER GP-02 (REACTUALIZADO MARZO -2010) RIG GP - 02 I. RIG UNIT: WILSON 42B 500
ESPECIFICACIONES EQUIPO DE WORKOVER GP-02 (REACTUALIZADO MARZO -2010) RIG GP - 02 I. RIG UNIT: WILSON 42B 500 SERIAL No. 10773 MANUFACTURING 1981 REMANUFACTURING 1997-USA RE-ENFORCED: 2009 COCA ECUADOR
More informationAtlas Copco Oil and Gas Rigs. The Predator Advantage
Atlas Copco Oil and Gas Rigs The Predator Advantage Atlas Copco Drilling Solutions Leading supplier globally of rotary drilling equipment Three manufacturing locations Garland, Texas, USA Nasik, India
More informationSchede tecniche Corsair 300 PDB
Progetto per la realizzazione di un impianto geotermico pilota nell area del Permesso di Ricerca Scarfoglio PROGETTO DEFINITIVO Documento SCA-001-PD-00-A01 Schede tecniche Corsair 300 PDB gennaio 2015
More informationRD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20
RD20/RD20XC/APL DRILL RIGS Oil and Gas Drilling atlascopco.com/rd20 THE INDUSTRY STANDARD Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance.
More information2 (two units) NEW MOBILE DRILLING AND WORKOVER RIG in REFURBISH For Oil, Gas and Water boring. Made in Germany. As in attached technical description.
1 NEW MOBILE DRILLING AND WORKOVER RIG For Oil, Gas and Water boring. Made in Germany. As in attached technical description. Price: not fixed EXW Germany, without packing. Delivery time: at once. Warranty:
More informationTECHNICAL SPECIFICATIONS
45127 45127 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 192'/58,5 m 360 Degrees 90,000 lbs/40 823 kg 127
More informationThe Predator Drilling Rig. 220,000 lb Hook Load (100,000 kg)
The Predator Drilling Rig 220,000 lb Hook Load (100,000 kg) 1 Insight and innovation The Predator Drilling System is designed to meet the more complex drilling and financial requirements of today s oil
More informationCLASSIFICATION: 1300 H.P. Land Rig rated to 13,500
www.qbsrigs.com sales@qbsrigs.com Houston, Texas (713) 623-6900 DRILLING RIG: Rig 70 CLASSIFICATION: 1300 H.P. Land Rig rated to 13,500 Manufacturer: Delivery Date: RG Petro August 29, 2007 (New) I- DRAWWORKS
More informationSection 25 Project Surplus Packages - Sales Item
Section 25 Project Surplus Packages - Sales Item 25030112 Complete Offshore Drilling Package Built to full North Sea Specifications BRAND NEW. DETAIL AS FOLLOWS: A Complete Package of Offshore Drilling
More informationCONTENTS TM200 TELESCOPIC CRANE
TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving
More informationOil Rigs Now Houston, Texas
Oil Rigs Now Houston, Texas 713-570-6450 DRAWWORKS: SUPERIOR 1000M New (2006) Single Drum Drawworks, 1,000 Hp Lebus grooved for 1-1/4 Drilling Line, Air operated Makeup & Breakout Catheads, Over-Running
More informationWorkover Drilling Rig Load: 180 t
1. Drilling Rig Workover Drilling Rig Load: 180 t 1.1 Carrier Truck Manufacturer: Daimler Benz Type: ACTROS 4150 AK, all-wheel-drive base vehicle Elongated frame, lower set drivers cab, 7 axles Motor V8
More informationIn the near future will be begining to production of seismic application vehicles.
01 Petromak Company Our company produces land rig, mobile rig and workover rigs for oil, naturel gas and geothermal drillings with together movable product pumps of on ground. In the near future will be
More informationTECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL
TM 5-3820-256-24-4 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
More information50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height
50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105
More informationCLASSIFICATION: 1300 H.P. Land Rig rated to 13,500
www.qbsrigs.com sales@qbsrigs.com Houston, Texas (713) 623-6900 DRILLING RIG: Rig 70 CLASSIFICATION: 1300 H.P. Land Rig rated to 13,500 Manufacturer: Delivery Date: RG Petro August 29, 2007 (New) I- DRAWWORKS
More informationTECHNICAL SPECIFICATIONS
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib
More informationSPECIFICATION OF ZJ40/2250LDB DRILLING RIG
SPECIFICATION OF ZJ40/2250LDB DRILLING RIG SECTION CATEGORY A HOISTING EQUIPMENT B ROTARY EQUIPMENT C PUMPING AND HIGH PRESSURE DISCHARGE SYSTEM D LOW PRESSURE MUD SYSTEM E PRIME MOVERS / TRANSMISSION
More informationrough Terrain crane 130 tons
rough Terrain crane 130 tons link-belt rtc-80130ii BOOM LENGTHS: 41 to 162 ft JIB LENGTHS: 31 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities 130 US ton 120 metric
More informationLOC 400 Drilling Rig
TABLE OF CONTENTS 1 DESCRIPTION...3 1.1 INTRODUCTION 3 1.2 CASING WHILE DRILLING 4 1.3 CONTAINERIZED DESIGN 5 1.4 AUTOMATED DRILLING 6 1.5 INTEGRATED DESIGN 7 1.6 OFFLINE BOP TESTING 8 1.7 EMERGENCY BACKUP
More informationRotary Drilling Co. Ltd. Presentation
Rotary Drilling Co. Ltd. Presentation Geographical distribution of services A. jelszavak kezelése HSE performance in line with industry benchmark. *Statistics are counted according to IADC. HSE performance
More informationSeries 1300 Hydraulic Crane 30 Ton Load Ratings
Series 13 Hydraulic Crane Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationIC-400-3A. Tech Spec. Industrial Crane. 25-Ton Max. Capacity (22,700 kg) Manufacturing Corp. Rated Capacity Limiter... Standard
Tech Spec IC-400-3A Industrial Crane 25-Ton Max. Capacity (22,700 kg) Rated Capacity Limiter... Standard Capacity on Outriggers... 50,000 lbs (22,700 kg) Pick and Carry Capacity... up to 24,400 lbs (11,000
More informationSeries 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More information40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area
40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib
More informationCRANE SPECIFICATIONS MODEL GR-300 EX CAPACITY 30,000kg at 3.0m BOOM Four section full power partially synchronized telescoping boom of round hexagonal
DATE August, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245
More informationSeries 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationTechnical Specification HY76 Build 1999, Working hour 12127, Mileage km according to counters.
Technical Specification HY76 Build 1999, Working hour 12127, Mileage 33250 km according to counters. Drilling equipment for vertical drilling by use of cable tool percussion, direct mud circulation, reverse
More informationRig 1 Sky top 4 Axle Carrier 6500 Drilling Depth
Rig 1 Sky top 4 Axle Carrier 6500 Drilling Depth POWER SYSTEM: Series 60 Detroit Diesel Engine Allison 5860 Transmission (1)125 KW Generator (1)75 KW Generator DRAW WORKS: Sky Top 4210 (550HP) 1 Drill
More informationTADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm
More information750 METERS DEPTH DRILLING RIG WITH 50 TONS HOISTING CAPACITY
750 METERS DEPTH DRILLING RIG WITH 50 TONS HOISTING CAPACITY BY TECHNICAL SPECIFICATIONS Itwill be mounted on TRUCK 1.MAST Mast Load Capacity Mast Pipes Diameter and Thickness Dimensions of themast 70
More informationAtlas Copco. Oil & Gas. Proposal/ Specifications Package. RD20III - Form C USA 08/07 Replaces B
Atlas Copco RD20III Oil & Gas Proposal/ Specifications Package RD20III - Form 87224-C USA 08/07 Replaces 87224-B Oil & Gas RD20III Proposal/ Specifications Package Table of Contents STANDARD EQUIPMENT...3
More informationCONTENTS TC700 SERIES TELESCOPIC CRANE
TC700 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////// Crane Features... 4 Range Diagram... 5 Load Chart: Main Boom... 6 Load Chart: Main Boom... 7
More informationSPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE
DATE November, 212 TADANO ROUGH TERRAIN CRANE M ODEL : GR-8EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 8, kg at 3. m BOOM 5-section, 12. m 47. m DIMENSION Overall length approx. 14,375 mm
More informationTADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width
More informationChristensen CT20. Surface core drill rig for mineral exploration
Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,
More informationCourtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
More informationPRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
More informationCustom Vac 822 Hydrovac with the following specifications (Tri Drive Mounted):
822 HYDROVAC Custom Vac 822 Hydrovac with the following specifications (Tri Drive Mounted): DESIGN: Vessel designed and constructed in full compliance with Transport Canada TC 407/412 and CSA B620 09 Debris
More informationABS Guide for Certification of Lifting Appliances 2016: Focus on machinery
ABS Guide for Certification of Lifting Appliances 2016: Focus on machinery Cernusco sul Naviglio, Italy 19 May 2016 Marine & Offshore Meeting 2016 Guide for Certification of Lifting Appliances Lifting
More information5 WINCHES a Quantity, make and rating of winches 1) INGERSOLL RAND, Model # D6U, 4Ton. (Rigfloor) 2) INGERSOLL RAND, Model # K6UL, 5Ton.
MOMENTUM RIG 4 RIG TYPE AND NUMBER: Wilson 75. Carrier Drive Momentum Rig 4 AGE OF RIG: Man. Dec. 1981, Refurb. July. 2011 DATE OF COMPLETION OF LAST CONTRACT: 1 DRAW WORKS a Make and Model Wilson 75 b
More informationFOR MORE DETAILS CONTACT: SPECIFICATIONS OF 1400 HP OR EQUIVALENT ELECTRICAL LAND RIG (NOTIONAL DRILLING CAPACITY OF 4700 MTRS)
FOR MORE DETAILS CONTACT: info@petrowatch.com SPECIFICATIONS OF 1400 HP OR EQUIVALENT ELECTRICAL LAND RIG (NOTIONAL DRILLING CAPACITY OF 4700 MTRS) THE RIG IS COMPLETE IN ALL RESPECTS AND EQUIPPED WITH
More informationView thousands of Crane Specifications on FreeCraneSpecs.com
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142
More informationON & OFF THE ROAD OR RAIL REACHNG NEW HEIGHTS AND WORKING HARDER THAN EVER.
ON & OFF THE ROAD OR RAIL REACHNG NEW HEIGHTS AND WORKING HARDER THAN EVER. For more than a half-century, the Little Giant Corporation has been a name synonymous with the railroad industry in producing
More informationCUSTOMIZED SERVICE & REPAIR SOLUTIONS
Offering exceptional repair services, across all brands, both in the shop and in the field CUSTOMIZED SERVICE & REPAIR SOLUTIONS 5060 74 Avenue SE, Calgary, AB Ph: 403-263-3133 Fax: 403-263-3155 info@drillform.com
More information43' (13.07) 18' 4" (5.59 ) 18' 6" (5.64) Turning Radius: TMS870-45' 1" (13.7 m) TTS870-29' 8" (9.04 m) (8 wheel)
Dimensions 14' 1/2" (4.28) TAILSWING 7' 7" (2.77) O/R RET. 8' 6" (2.59) 15' 5" (5.64) O/R PART. EXTENDED 24' (7.31) ' 6" (4.5) RETRACTED 137' 9" (1653.62) EXTENDED 43' (13.07) 11' 8-1/4" (3.56) 1' 8" (0.53)
More information30105F TECHNICAL SPECIFICATIONS 30105F SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height
30105F 30105F SIDE VIEW DIAGRAM 6 Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard) 28,160
More informationcontents iii Figures and Tables Foreword Acknowledgments Units of Measurement xii
Figures and Tables Foreword ix Acknowledgments Units of Measurement vi xi xii Introduction 1 Derricks versus Masts 2 Hoisting System Components 2 Top Drives 3 Blocks 4 Drilling Line 4 Deadline Tie-Down
More informationSCHEDULE 1 DATE: JANUARY 2015 DESCRIPTION OF RIG EQUIPMENT PROVIDED BY CONTRACTOR (ATTACHMENT TO EXHIBIT A)
SCHEDULE 1 DATE: JANUARY 2015 DESCRIPTION OF RIG EQUIPMENT PROVIDED BY CONTRACTOR (ATTACHMENT TO EXHIBIT A) CONTRACTOR: JOMAX DRILLING (1988) LTD. DEPTH CAPACITY: 5,400 METERS WITH 127 mm DRILL PIPE BIOFUEL
More informationSuperintendent Rig Checklist
Superintendent Rig Checklist Rig #: Operating Company: Well Name & #: Date/Time of Inspection: Inspected By: Company Man: Tool pusher: Driller: Ton Miles Logged and up to date: BOP Drill date and time:
More informationCROSSOVER T capacity class Boom truck crane Datasheet imperial
CROSSOVER 00 T capacity class Boom truck crane Datasheet imperial CROSSOVER 00 Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 118 maximum tip height 32/57
More informationSUNNDA CORPORATION. Go Above & Beyond
SUNNDA CORPORATION Go Above & Beyond Sunnda Corporation Headquartered in the energy capital of the world - Houston, Texas, Sunnda Corporation designs, manufactures, and markets an extensive line of oil
More informationLAGO Energy Presents,
LAGO Energy Presents, www.lagoenergyusa.com ONE 15OO HP ELECTRIC DIESEL LAND RIG A PROJECT AVAILABLE NOW FOR SALE mball@lagoenergyusa.com Ref. LEATLAND01 Sales Price: US$15.2 million 1 PRODUCT INFORMATION
More informationSeries 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationPRODUCT OVERVIEW.
PRODUCT OVERVIEW www.weldco-hydralift.com CONTENTS WHL23TC60/75/100...4 HL30TC70...8 OUR PRODUCTS Weldco Hydra-Lift manufactures truck mounted telescopic cranes ranging from 23-ton to 50-ton capacities.
More informationTADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA
SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall
More informationALL TERRAIN CRANE GA-1000N
ALL TERRAIN CRANE GA GA-N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-N-1-912 Control No. JA-2 35 GA-N-1-912 GA-N CRANE SPECIFICATIONS CRANE CAPACITY 12.2m Boom,kg at 2.8m (13part-line)
More information30105F-D TECHNICAL SPECIFICATIONS 30105F-D SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 4 Overall Height
30105F-D 30105F-D SIDE VIEW DIAGRAM Maximum Vertical Reach 162'/49 m Working Area 180 Degrees Standard (360 Optional) Lifting Capacity 60,000 lbs/27 216 kg Boom Length 105 /32 m Crane Weight (Standard)
More informationLF 90D Surface coring drill. Technical Overview
LF 90D Surface coring drill Technical Overview LF 90D SURFACE CORING DRILL Copyright 2013 Boart Longyear. All rights reserved. Mobility Engineered for mobility, the LF 90D surface coring drill features
More informationIC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006
Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered
More informationKEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning
More informationAtlas Copco. T3W Water Well Drill Specifications. U.S. Units
Atlas Copco T3W Water Well Drill Specifications U.S. Units Table of Contents General...3 Power Pack Deck Engine and Air End...3 Hydraulic System...3 Cooling Package...3 Derrick...4 Feed System...4 Rotary
More informationHYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY
HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm Overall width approx.
More informationHYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY
HYDRAULIC ROUGH TERRAIN CRANE GR-500EX Left hand steering GENERAL DATA CRANE CAPACITY 50,000 kg at m BOOM 4-section, 10.7 m - 34.7 m DIMENSION Overall length approx. 13,055 mm Overall width approx. 2,980
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationCM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
More informationTADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA
DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall
More informationWorking Range GROVE MODEL TM TON CAPACITY. LIFTING CHARTS - Hydraulic Truck Cranes 9'-7"
LIFTING CHARTS - Hydraulic Truck Cranes GROVE MODEL - TON CAPACITY Working Range 42-1 ft. (12.8-39.6 m) 33-58 ft. (10.0-17.7 m) 3 FEET 210 200 1 58 48 1 1 33 1 1 1 1 1 115 85 20 10 0 20 10 0 1 1 1 1 1
More informationSCHEDULE 1 DATE: JANUARY 2015 DESCRIPTION OF RIG EQUIPMENT PROVIDED BY CONTRACTOR (ATTACHMENT TO EXHIBIT A)
SCHEDULE 1 DATE: JANUARY 2015 DESCRIPTION OF RIG EQUIPMENT PROVIDED BY CONTRACTOR (ATTACHMENT TO EXHIBIT A) CONTRACTOR: JOMAX DRILLING (1988) LTD. DEPTH CAPACITY: 5,400 METERS WITH 127 mm DRILL PIPE A.
More informationTADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
More information