PAN1760A. Design Guide. Wireless Modules. Bluetooth Low Energy Module. Rev.1.0
|
|
- Jocelyn Fleming
- 5 years ago
- Views:
Transcription
1 PAN760A Bluetooth Low Energy Module Design Guide Rev..0 Wireless Modules
2 By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Design Guide before initiating or completing a design. Panasonic Industrial Devices Europe GmbH 07. This specification sheet is copyrighted. Reproduction of this document is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Do not disclose it to a third party. All rights reserved. This Design Guide does not lodge the claim to be complete and free of mistakes. Engineering Samples (ES) If Engineering Samples are delivered to the customer, these samples have the status Engineering Samples. This means that the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and they may differ from the published Product Specification. Engineering Samples are not qualified and they are not to be used for reliability testing or series production. Disclaimer The customer acknowledges that samples may deviate from the Design Guide and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by: The use of the Engineering Sample other than for evaluation purposes, particularly the installation or integration in another product to be sold by the customer, Deviation or lapse in function of the Engineering Sample, Improper use of the Engineering Sample. Panasonic Industrial Devices Europe GmbH disclaims any liability for consequential and incidental damages. In case of any queries regarding the Engineering Samples, please contact your local sales partner or the related product manager. Design Guide Rev..0 Page
3 Table of Contents About This Document Purpose and Audience Revision History Use of Symbols Related Documents... 4 Overview Block Diagram... 5 Reference Design Schematic Placement Recommendations Building Blocks Configuration Settings Life Support Policy... 5 Appendix Ordering Information Contact Details... Design Guide Rev..0 Page
4 About This Document About This Document. Purpose and Audience This Design Guide applies to the Bluetooth development platform PAN760A USB. The intention is to enable our customers to easily integrate our module PAN760A in their product. This guide describes the hardware and gives useful hints.. Revision History Revision Date Modifications/Remarks st version.. Use of Symbols Symbol [chapter number] [chapter title] Description Note Indicates important information for the proper use of the product. Non-observance can lead to errors. Attention Indicates important notes that, if not observed, can put the product s functionality at risk. Tip Indicates useful information designed to facilitate working with the Module. Cross reference Indicates cross references within the document. Example: Description of the symbols used in this document. Use of Symbols. Requirement Indicates a requirement that must be met before the corresponding tasks can be completed. Result Indicates the result of a task or the result of a series of tasks..4 Related Documents [] PAN760A Software Guide Please refer to the Panasonic website for more information as well as related documents 5.. Product Information. Design Guide Rev..0 Page 4
5 Overview Overview The PAN760A USB is a development platform for the PAN760A Bluetooth low energy module to implement Bluetooth functionality into various electronic devices. This guide describes the hardware. For the software refer to the Software Guide. Please refer to the Panasonic website for related documents 5.. Product Information. Further information on the variants and versions 5. Ordering Information.. Block Diagram Design Guide Rev..0 Page 5
6 + 5V + 5V USB_A X TP TP GND@ GND@ GND@4 GND@ TP TP4 BLM5BBSN L R TP5 C9 0k R TP6 0nF 0.5R R 4k7 + 5V R 4k7 R4 4k7 R5 R4 R5 k % R VDDA VDDA VDDA VDDA VDDA VDDA EP EP_GND R4 0.5R R4 C R44 R46 R47 R55 0 LED Green R6 R64 + 5V C9 M_V Reference Design Reference Design. Schematic TPS I N OUT EN 4 C6 GND IC4 µ L USB_V C9 BLM5BBSN 4µ7 C4 4µ7 R7 USB_VCC DP DN USB_GND 4 C0 C C8 C0 C C C5 C6 C7 4µ7 IC I / O VP 5 X 4MHz I / O 4 I / O 6 C C4 I / O4 GND IP40CZ6 8pF 8pF C C5 IC5 6 RESET_N 7 VBUS_DET USBDP_UP 0 USBDM_UP XTALI N/ CLKI N XTALOUT TEST 4 PLLFI LT 5 RBI AS USB5B 4 CRFI LT PRTPWR/ BC_EN 6 PRTPWR/ BC_EN R45 OCS_N 7 OCS_N 0k DP USBDP_DN DM USBDM_DN 4 DP USBDP_DN DM USBDM_DN 8 SUSP_I ND/ NON_REM0 NON_REM 4 CFG_SEL0 5 CFG_SEL C7 C8 R68 0 R69 0 IC6 9 VCC VCCI O 8 RESET# 7 OSCI 8 OSCO 6 VOUT 4 USBDP 5 USBDM 4 GND FTRQ TXD 0 RXD RTS# 8 CTS# DTR# 6 DSR# 7 DCD# RI # CBUS0 CBUS 0 CBUS CBUS 9 CBUS4 6 TEST GND 4 GND 7 GND 0 4 GPIO8 TX_OB GPIO7 RX_OB JP JP JP GPIO5 GPIO6 µ JP SWDIO_OB JP4 M_V R0 n.c. R 0 MOD_PORTS JP SWDCLK_OB C4 D9 SWDI O RF C5 SWDCLK GPIO5 F7 GPI O5/ UARTTX 0 GPIO6 E6 R GPI O6/ UARTRX C6 GPI O GPIO7 B5 F6 GPI O7 GPI O GPIO8 B6 GPI O8 GPIO A B GPI O GPI O9 GPIO4 B C GPI O4 GPI O0 F8 GPI O GPIO0 D4 F5 GPI O0/ WAKEUP0 GPI O4 GPIO5 D6 GPI O5/ WAKEUP B7 GPI O5 E5 SLPXOI N E GPI O/ SCL A E RESET GPI O/ SDA M_V S PAN760A BU-000P M_RESET C8 JP RESET_OB X4 GPIO GPIO GPIO9 GPIO0 GPIO GPIO4 GPIO5 GPIO GPIO JP5 JP4 JP M_V R8 k k M_V R48 M_V GPIO0 GPIO7 R5 k R56 k JP5 JP R9 k R49 k GPIO GPIO8 R6 k R57 k JP6 JP R0 k R50 k GPIO GPIO9 R7 k R58 k JP7 JP4 R k R5 k GPIO GPIO0 R8 k R59 k JP8 JP5 R k R5 k GPIO4 GPIO R9 k R60 k JP9 JP6 R k R5 k GPIO5 GPIO R40 k R6 k JP0 JP7 R4 k R54 k GPIO6 GPIO R4 k R6 k R65 k R66 k R67 k JP8 GPIO4 R70 k JP9 GPIO5 R7 k JP0 GPIO5 R7 k TITLE: MOD_SUPLY VCC A5 VCC A6 A4 N.C. A8 N.C. B N.C. B4 N.C. B8 A B9 A7 C A9 C A C7 A D C8 D C9 D D7 D5 D8 E E8 E4 E9 E7 F F F9 F F F4 F PAN760A PAN760A_USB_V.0 C40 Document Number: REV: Date: : Sheet: / ATSAMUCA-CU µ L C BLM5BBSN 4µ7 4µ7 Green 70 R6 LED R0 6k8 B GNDUTMI A9 K GNDANA VDDOUT B F6 VDDUTMI GND_ F F5 E6 E GND_ VDDI O_ VDDI O_ VDDI O_ G6 GND_ E5 GNDBU D C GNDPLL VDDPLL D4 E7 B F9 G5 H VDDCORE_ VDDCORE_ VDDCORE_ VDDCORE_4 VDDCORE_5 VDDCORE_6 J ADVREF K4 ADBVREF K VDDANA J-Link OB C C4 C5 C6 C7 0µ For programming SAMUC C0 C C4 C5 C8 0µ B7 C 0nF C8 D8 R9 0 TP7 D6 C9 C7 A7 TP8 B9 B8 D7 TST X MHz A0 XI N C6 C9 B0 XOUT 8pF 8pF VDDI N A8 NRST NRSTB FWUP ERASE JTAGSEL TMS/ SWDIO TCK/ SWCLK TDI TDO/ TRACESWO VDDBU C0 PA0/ PGMMD J0 PA/ PGMRDY H9 PA/ PGMNOE H0 PA/ PGMNVALI D G8 G0 PA4/ PGMM0 G9 PA5/ PGMM F8 PA6/ PGMM F0 PA7/ PGMM E0 PA8/ PGMD0 E9 PA9/ PGMD E8 PA0/ PGMD D9 PA/ PGMD D0 PA/ PGMD4 H5 PA/ PGMD5 K6 PA4/ PGMD6 H6 PA5/ PGMD7 J6 PA6/ PGMD8 K7 PA7/ PGMD9 H7 PA8/ PGMD0 J7 PA9/ PGMD K8 PA0/ PGMD J8 PA/ PGMD H4 PA/ PGMD4 K9 PA/ PGMD5 H8 PA4 K0 PA5 J9 PA6 H PA7 E PA8 E PA9 J4 PA0 F4 PA R 50 R 50 R 50 LED Red R5 00 R6 00 R7 00 R8 00 R9 00 R4 70 RESET_OB RX_OB TX_OB SWDCLK_OB SWDIO_OB DM DP R7 9 % R8 9 % A XI N A XOUT D DHSDM D DFSDM C DHSDP C DFSDP A VBG C 0pF IC G PB0 F PB G PB J5 PB K5 PB4 H PB5 J PB6 K PB7 J PB8 E4 PB9 B4 PB0 G PB F PB G4 PB C4 PB4 G7 PB5 F7 PB6 A4 PB7 B5 PB8 C5 PB9 D5 PB0 A5 PB C6 PB A6 PB B6 PB4 C TPS I N OUT EN 4 GND IC C7 TITLE: PAN740ETU Reference Design PAN760A_USB_V.0 Document Number: REV: DS-DG-740ETU- V. Date: : Sheet: / Design Guide Rev..0 Page 6
7 C C5 C C0 R6 C5 C8 R8 R9 R0 R R R R4 R48 R49 R50 R5 R45 R64 C R6 C9 R55 C8 C7 C C4 IC R7 R6 L R5 R4 R R I C4 C6 C9 C7 C C5 C0 C R0 R4 S R6 L C7 C C R IC R R0 JP JP R R5 R5 R54 R65 R66 R67 Reference Design. Placement Recommendations C4 C8 R8 R R4 LED JP5 JP6 JP7 JP8 JP9 JP0 R9 R5 R R C4 C C6 IC R7 R60 R6 R6 C40 R70 R7 R7 JP R9 C R8 C5 LED L C0 R C8 C6 C9 C C9 X MOD JP4 X C4 X X4 JP JP JP IC6 C LED R47 R4 R5 R6 R7 R8 R9 R40 R4 R56 R57 R58 R59 R69 R68 IC5 R4 R7 R5 C7 C6 R44 R46 JP4 JP5 JP6 JP7 JP8 JP9 JP0 JP JP JP JP4 JP5 The module shall be placed as close as possible to the edge of the application. It is important to have the keep out area below the antenna. Keep out area To download the design files go to the download area on the product website. Energy-Module.html Design Guide Rev..0 Page 7
8 Reference Design PAN760A WITH ANTENNA PLACEMENT If possible place the module in the center of mother PCB. Min. 5mm Min. 5mm Min. 40mm.00 Restricted Area No copper any layer Top View 5.6 Place the module at the edge of mother PCB. Use a Ground plane in the area surrounding the module wherever possible. Dimensions are in mm. Design Guide Rev..0 Page 8
9 Reference Design. Building Blocks JTAG SWD for programming and debugging USB HUB IO breakout area: IOs are switchable to GND or VDD to control e.g. host mode or standalone IOs can be connected to external e.g. sensor boards FTDI USB to UART conversion for host mode Design Guide Rev..0 Page 9
10 Reference Design.4 Configuration Settings After each different configuration the reset button needs to be pressed. The V Jumper can be removed for current measurements. Design Guide Rev..0 Page 0
11 4 Life Support Policy 4 Life Support Policy This Panasonic Industrial Devices Europe GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any damages resulting. Design Guide Rev..0 Page
12 5 Appendix 5 Appendix 5. Ordering Information Variants and Versions Order Number Brand Name Description MOQ ENW89847AZKF PAN760A-ETU USB Evaluation Board ENW89847AYKF PAN760A-EMK USB Evaluation Boards Design Guide Rev..0 Page
13 5 Appendix 5. Contact Details 5.. Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit For Panasonic Sales assistance in North America, visit the Panasonic Sales & Support Tool to find assistance near you at Please visit the Panasonic Wireless Technical Forum to submit a question at Product Information Please refer to the Panasonic Wireless Connectivity website for further information on our products and related documents: For complete Panasonic product details in the EU, visit For complete Panasonic product details in North America, visit Design Guide Rev..0 Page
UM0672 User manual. CRX14 and CR14 reference design PCB Gerber files. Introduction
User manual CRX14 and CR14 reference design PCB Gerber files Introduction The purpose of this user manual is to give printed-circuit board references to ease design in the case of STMicroelectronics CRX14
More informationMAX6971 Evaluation Kit. Evaluates: MAX6971
9-676; Rev 0; /07 General Description The MAX697 evaluation kit (EV kit) provides a proven design to evaluate the MAX697 6-port, constant-current LED driver. The EV kit also includes Windows 000/XP/Vista
More informationMB86R01 Jade PCB Design Guide
Application Note MB86R01 Jade PCB Design Guide Fujitsu Microelectronics Europe GmbH History Date Author Version Comment 23.02.2007 AvT 1.0 Draft version 25.05.2010 AvT 2.0 Updated using Japanese Guide
More informationDatasheet. CANgineII Cable
Datasheet CANgineII Cable Edition 2 Dec 2015 Seite 2 von 7 Version History Edition Date State 2 Dec 2015 D8 and RDL cable branch lengths changed to 4 m D8 is connected to digital tachograph D connector
More informationZSSC3131 / ZSSC3136 Application Note - Automotive Sensor Switch
ZSSC33 / ZSSC336 Application Note - Automotive Sensor Switch Contents Description..... General..... ZSSC33 and ZSSC336 Sensor Conditioners....3. Benefits for Automotive Switch Applications... Setting up
More informationISL80102, ISL80103 High Performance 2A and 3A LDOs Evaluation Board User Guide
ISL812, ISL813 High Performance 2A and LDOs Evaluation Board User Guide Description The ISL812 and ISL813 are high performance, low voltage, high current low dropout linear regulator specified at 2A and,
More informationVolume CHARGESTORM AB. User Guide CSR100
Volume 1 CHARGESTORM AB Charge station modell CSR100 User Guide CSR100 CHARGESTORM AB User Guide CSR100 ã Chargestorm AB Laxholmstorget 3 SE-602 21 Norrköping, Sweden Phone +46 11 333 0002 Fax +46 11 333
More informationFLEXnet DC Programming & Guidelines
FLEXnet DC Programming & Guidelines PURPOSE: This document provides a detailed description of the FLEXnet DC Battery Monitor (FN-DC), its operation, and the best way to use it in different applications.
More informationEvaluates: MAX MAX44284 Evaluation Kit. General Description. Quick Start. EV Kit Contents. Features and Benefits. Required Equipment.
General Description The MAX44284 evaluation kit (EV kit) provides a proven design to evaluate the MAX44284 high-precision, lowpower, current-sense amplifier. This EV kit demonstrates the MAX44284 in an
More informationPLC Stamp mini 2 Datasheet
PLC Stamp mini 2 Datasheet I2SE GmbH February 9, 2016 1/11 CONTENTS CONTENTS Contents 1 Revisions 3 2 Abstract 3 3 Applications 3 4 Interfaces 3 5 Handling 4 6 Module Overview 4 7 Technical Data 5 7.1
More information39 9 DOTS MATRIX LED DRIVER
DOTS MATRIX LED DRIVER DESCRIPTION The ISFL is a general purpose LED Matrix programmed via an IC compatible interface. Each LED can be dimmed individually with -bit PWM data and -bit scaling data which
More informationExchange of rollers from the XTS-Mover
Service documentation for AT901-0050-0550 and AT9011-00x0-0550 Version: Date: 1.0 0.10.017 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1. Documentation issue
More informationYOGEV. Hydro-Power Unit. Installation and Operation Guide
YOGEV Hydro-Power Unit Installation and Operation Guide Copyright 06 HydroSpin, All rights reserved. The data contained in this document is proprietary to HydroSpin. It is disclosed to the receiving party
More informationS AC-Coupled I/Os for Ease of Testing S Fully Assembled and Tested S +3.3V Power-Supply Operation S On-Board 25MHz Crystal
19-5065; Rev 0; 12/09 E V A L U A T I O N K I T A V A I L A B L E MAX3677 Evaluation Kit General Description The MAX3677 evaluation kit (EV kit) is an assembled demonstration board that provides convenient
More informationMaxim Integrated Products 1
19-4920; Rev 0; 8/09 MAX15046B Evaluation Kit General Description The MAX15046B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate
More informationExample application for an supply air control with recirculated air addition. HVAC Application Note 3
Example application for an supply air control with recirculated air addition HVAC Application Note 3 Version 14.03.2007 2 General Copyright 2007 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved.
More informationPLC Stamp micro 2 Datasheet
PLC Stamp micro 2 Datasheet I2SE GmbH March 21, 2016 1/11 CONTENTS CONTENTS Contents 1 Revisions 3 2 Abstract 3 3 Applications 3 4 Interfaces 3 5 Handling 4 6 Module Overview 4 7 Technical Data 5 7.1 Absolute
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 221868-CI3-2 CB DE1-56824 Date of issue...
More informationThe Ultimate Smart Grid Solution INSTRUCTION MANUAL
ECOWISE EW30/1 The Ultimate Smart Grid Solution INSTRUCTION MANUAL Welcome! Congratulations on selecting the ECOWISE unit to manage your energy supply needs. ECOWISE units reduce the amount of electric
More informationMotor Filter Module Hardware Manual P/N: EDU218 Revision:
Motor Filter Module Hardware Manual P/N: EDU218 Revision: 1.05.00 A B C SHLD TB1 INPUT Motor Filter Module DANGER! High Voltage CAUTION Surface may be Hot. A B C SHLD TB2 OUTPUT Global Technical Support
More informationLM5576 Evaluation Board
LM5576 Evaluation Board Introduction The LM5576 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the
More informationWWW.MORETRACTION.COM TMS-750 ELECTRONIC TRACTION CONTROL US PATENT 6,577,944 Other Patents Pending COPYRIGHT NOTICE Copyright 1999-2014 Davis Technologies, LLC. All rights reserved. Information in this
More informationKeContact P20. User manual
KeContact P20 User manual Comments to this manual In this manual you will find warnings against possible dangerous situations. The used symbols apply to the following meanings:!! WARNING! Indicates a potentially
More informationFeatures. General Description. Component List
General Description The MAX17502F evaluation kit (EV kit) provides a proven design to evaluate the MAX17502F high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses the device
More informationEvaluate: MAX17502E in TDFN Package. MAX17502E Evaluation Kit. General Description. Features. Component List
General Description The MAX17502E evaluation kit (EV kit) provides a proven design to evaluate the MAX17502E high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses this device
More informationImplementation procedure for certification and continued airworthiness of Beriev Be-200E and Be-200ES-E
1. Scope 1.1 The general process is described in the implementation procedure for design approvals of aircraft, engine and propeller from CIS and in the implementation procedure for design approvals of
More informationP1110-EVAL-PS. PowerSpot RF Wireless Power Development Kit for Battery Recharging. User Manual
P1110-EVAL-PS PowerSpot RF Wireless Power Development Kit for Battery Recharging User Manual Overview The PowerSpot RF Wireless Power Development Kit for Battery Recharging is a complete demonstration
More informationSUBSTATION INTERLOCKING SCHEMES
SUBSTATION INTERLOCKING SCHEMES This document is for internal and contract specific use only. Disclaimer NGG and NGET or their agents, servants or contractors do not accept any liability for any losses
More informationDV2000S1 and DV2000TS1
Features DV2000S1 and DV2000TS1 Multi-Chemistry Switching Charger Development System Safe management of fast charge for icd, imh, or Li-Ion battery packs On-board switching regulation for up to 3A charge
More informationPRO STEER Block Hydraulic Installation. New Holland TR Series Combine Harvester
PRO STEER Block Hydraulic Installation New Holland TR Series Combine Harvester Part Number A2364 Rev. 4.0 Copyright Topcon Precision Agriculture July, 2008 All contents in this manual are copyrighted by
More information80V 300Ah Lithium-ion Battery Pack Data Sheet
80V 300Ah Lithium-ion Battery Pack Data Sheet 80 V, 300 amp-hour capacity, maintenance-free energy storage, IP65 design, fully integrated BMS, integrated fuse and safety relay protection, highly configurable
More informationMACP TB. 23 db Coupler MHz Rev. V1. Features. Functional Schematic. Description. Pin Configuration 4. Ordering Information 1,2
23 Coupler Features 23 Coupling Ratio Surface Mount Package Available on Tape and Reel Excellent Temperature Stability RoHS Compliant and Pb Free 260 C Reflow Compatible Description The MACP-0145 is a
More informationHardware Integration Manual
Hardware Integration Manual MTi 1-series Document MT1503P, Revision A, 5 Apr 2018 Xsens Technologies B.V. Xsens North America, Inc. Pantheon 6a phone +31 (0)88 973 67 00 10557 Jefferson Blvd, phone 310-481-1800
More informationS Fully Assembled and Tested
19-5591; Rev 0; 10/10 MAX9626 Evaluation Kit General Description The MAX9626 evaluation kit (EV kit) provides a proven design to evaluate the MAX9626 low-noise, lowdistortion, and high-bandwidth differential
More informationSeries. idrive 300. Installation and User s Guide INTELLIGENT ENVIRONMENTAL CONTROL. March 2014 v1.1 Edition Copyright 2014 Corporation
idrive 300 Series INTELLIGENT ENVIRONMENTAL CONTROL Installation and User s Guide March 2014 v1.1 Edition Copyright 2014 Corporation Table of Contents Introduction... 1 Customer Service... 2 Contact Us...
More informationP1110-EVAL-01. Contents. Lifetime Power Energy Harvesting Development Kit for Battery Recharging User Manual
P1110-EVAL-01 Lifetime Power Energy Harvesting Development Kit for Battery Recharging User Manual Overview The Lifetime Power Energy Harvesting Development Kit for Battery Recharging is a complete demonstration
More informationPinPoint Gyro Evaluation Boards
PinPoint Gyro Evaluation Boards PinPoint Gyro Evaluation Boards Three PinPoint gyro evaluation boards are available: Single-axis CRM100 Gyro Evaluation Board (Part Number 400046-0100) Single-axis CRM200
More informationAssembly Manual for New Control Board 22 June 2018
Assembly Manual for New Control Board 22 June 2018 Parts list Arduino 1 Arduino Pre-programmed 1 Faceplate Assorted Header Pins Full Board Rev A 9 104 capacitors 1 Rotary encode with switch 1 5-volt regulator
More informationMulti Wheel Bluetooth Tire Pressure Monitoring System User Manual Model: External
T P M S Multi Wheel Bluetooth Tire Pressure Monitoring System User Manual Model: External Table of Contents 1. PRODUCT INTRODUCTION... 2 2. NOTICE... 2 3. BLE TPMS SPECIFICATION... 3 4. BLE TPMS PACKAGE...
More informationFW-IOB-T-120/208VAC Input/Output/Bypass Assembly. Installation Instructions
FW-IOB-T-120/208VAC Input/Output/Bypass Assembly Installation Instructions The OutBack Power Systems FW-IOB-T-120/208VAC allows manual switching between the FX Series Inverter/ Charger and a second AC
More informationInstruction Manual Installation and Operation Guidelines for DWL5000XY and DWL5500XY Tilt Sensor Modules (Version 2.2)
Instruction Manual Installation and Operation Guidelines for DWL5000XY and DWL5500XY Tilt Sensor Modules (Version 2.2) INTELLECTUAL PROPERTY This manual contains propriety information, which is protected
More informationTHE EMPIRE DISTRICT ELECTRIC COMPANY P.S.C. Mo. No. 5 Sec. 4 1st Revised Sheet No. 23
P.S.C. Mo. No. 5 Sec. 4 1st Revised Sheet No. 23 Canceling P.S.C. Mo. No. 5 Sec. 4 Original Sheet No. 23 PURPOSE: The purpose of this Rider SR is to implement the solar rebate established through 393.1030
More informationMAX3747/MAX3747A Evaluation Kit
19-3297; Rev A; 05/04 MAX3747/MAX3747A Evaluation Kit General Description The MAX3747/3747A evaluation kit (EV kit) simplifies evaluation of the MAX3747/3747A limiting amplifiers. The EV kit enables testing
More informationSystem Description SMA FLEXIBLE STORAGE SYSTEM in the United Kingdom
System Description SMA FLEXIBLE STORAGE SYSTEM in the United Kingdom Adjustment of electrical connection and configuration for the low-voltage grid in the United Kingdom of Great Britain and Northern Ireland
More informationINW Panel Meter Reading an INW PT12 Sensor
INW Panel Meter Reading an INW PT12 Sensor PROUDLY MADE IN THE USA ISO 9001:2008 Certified Company Table of Contents Introduction...5 What is an INW Panel Meter for an INW PT12 Smart Sensor?...5 Initial
More informationAccessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600
Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600 Installation Guide WBP-Box-IEN103320 IMEN-WBP-BOX Version 2.0 EN SMA Solar Technology AG Table of Contents Table of Contents
More informationINSTALL GUIDE Dodge/RAM 5.7L HEMI
INSTALL GUIDE 2009-2017 Dodge/RAM 5.7L HEMI TABLE OF CONTENTS 3 GETTING STARTED 3 PARTS LIST 4 INSTALLATION INSTRUCTIONS 4 REMOVING THE STOCK INTAKE ASSEMBLY 6 INSTALLING THE AIR FILTER 7 INSTALLING THE
More informationCombiner Manual #OMBINER #OMBINER < 2* )NSTALLATION 7(&+12/ i 62/$5
Combiner Manual i ii Combiner Manual Combiner Manual Copyright 2004 SMA America, Inc. All rights reserved. All rights reserved. No part of this document may be reproduced, stored in a retrieval system,
More informationOperating instructions Flow monitor SI / / 2014
Operating instructions monitor SI5002 80000385 / 00 07 / 2014 Contents 1 Preliminary note...3 1.1 Explanation of symbols...3 2 Safety instructions...3 3 Functions and features...4 3.1 Applications...4
More informationThe Ultimate Smart Grid Solution INSTRUCTION MANUAL
ECOWISE EW20/1 EW30/1 The Ultimate Smart Grid Solution INSTRUCTION MANUAL Welcome! Congratulations on selecting the ECOWISE unit to manage your energy supply needs. ECOWISE units reduce the amount of electric
More informationV CC 3 7 CANH AMIS CANL. Vsplit C GND. Figure 1. Schematic Diagram used for ESD Stress and Functional Verification
AMIS-42665 CAN Transceiver Immunity Against ESD Prepared by: ON Semiconductor APPLICATION NOTE Introduction The AMIS-42665 high-speed CAN transceiver was ESD stressed without voltage supply and used a
More informationZT-USB Series User Manual
ZT-USB Series User Manual Warranty Warning Copyright All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year, beginning from the date of delivery
More informationDV2031S2. Lead-Acid Charger Development System. Control of On-Board P-FET Switch-Mode Regulator. Features. General Description
DV03S ead-acid Charger Development System Control of On-Board P-FET Switch-Mode Regulator Features ä bq03 fast-charge control evaluation and development ä Onboard configuration for fast charge of, 3, 4
More informationT P M S. Multi Wheel Bluetooth. Tire Pressure Monitoring System. User Manual. Model: External
T P M S Multi Wheel Bluetooth Tire Pressure Monitoring System User Manual Model: External Table of Contents 1. PRODUCT INTRODUCTION... 2 2. NOTICE... 2 3. BLE TPMS SPECIFICATION... 3 4. BLE TPMS PACKAGE...
More informationSEMITOP2,3,4 Press-Fit
Mounting Instruction SEMITOP2,3,4 Press-Fit Revision: 03 Issue date: 2017-08-28 Prepared by: Roberto Agostini Approved by: Werner Obermaier Keyword: SEMITOP, mounting instructions, one screw mounting,
More informationIFC-BL02 Interface Free Controller Brushless Motor Card
IFC-BL02 Interface Free Controller Brushless Motor Card User s Manual V1.1 Apr 2008 Information contained in this publication regarding device applications and the like is intended through suggestion only
More informationSeeker HL Source Transmitter. User s Guide
Seeker HL Source Transmitter User s Guide Notice Every effort was made to ensure that the information in this manual was accurate at the time of printing. However, information is subject to change without
More informationPC-I 04/104. Passive PC/CAN Interface HARDWARE MANUAL ENGLISH
PC-I 04/104 Passive PC/CAN Interface HARDWARE MANUAL ENGLISH HMS Technology Center Ravensburg GmbH Helmut-Vetter-Straße 2 88213 Ravensburg Germany Tel.: +49 751 56146-0 Fax: +49 751 56146-29 Internet:
More informationWARRANTY REGISTRATION FORM
WARRANTY REGISTRATION FORM Please read & fill out attached warranty registration form to activate warranty This warranty registration must be received within 45 days from the time of purchase. Your New
More informationProduct Datasheet P MHz RF Powerharvester Receiver
DESCRIPTION The Powercast P1110 Powerharvester receiver is an RF energy harvesting device that converts RF to DC. Housed in a compact SMD package, the P1110 receiver provides RF energy harvesting and power
More informationEvaluate: MAX17501H in TDFN Package
General Description The MAX17501H EV kit provides a proven design to evaluate the MAX17501H high-efficiency, high-voltage, synchronous step-down DC-DC converter in a TDFN package. The EV kit uses the MAX17501H
More informationSSC Sensor Replacement Board for the SSC Evaluation Kit. Features. Benefits
SSC Sensor Replacement Board for the SSC Evaluation Kit ZSC31XXX / ZSSC3XXX Datasheet Brief Description The SSC Sensor Replacement Board is included in IDT s modular SSC Evaluation Kits, which provide
More informationRig Master Power by Mobile Thermo Systems Inc.
RigMaster Power Dealer Warranty Policy The Limited Warranty This limited warranty applies to the RigMaster Auxiliary Power Unit (RigMaster APU) which consists of the following components: 1. The generator
More informationPowerFLEX Module Limited Warranty Program
PowerFLEX Module Limited Warranty Program Global Solar provides a limited warranty applicable to the Global Solar PowerFLEX TM Modules listed below: PowerFLEX TM 6-Meter - - FG-1 BT(M or N)-(275 or 300)
More informationETSI EN V1.2.1 ( ) Harmonized European Standard (Telecommunications series)
EN 301 783-2 V1.2.1 (2010-07) Harmonized European Standard (Telecommunications series) Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur
More informationPRINTING OF BMI WHEELS
REQUEST FOR QUOTATIONS PRINTING OF BMI WHEELS Food and Nutrition Technical Assistance Project III (FANTA) Issue date: June 20, 2016 To: Response Deadline: June 28, 2016 Submit Questions by: June 27, 2016
More informationTIDA USB Type-C TM HDD with USB Power Delivery Reference Design. BERTScope USB 3.0 Receiver Test
Page 1 of8 Test Report December 2015 TIDA-00882 USB Type-C TM HDD with USB Power Delivery Reference Design BERTScope USB 3.0 Receiver Test RECEIVER TEST RESULTS 11/12/2015 08:51:18 Identification Name:
More informationDispense interface converter NA-8 (RS-485/RS-232 to non-addressable RS-422/RS-485/RS-232 and backwards)
Dispense interface converter NA-8 (RS-485/RS-232 to non-addressable RS-422/RS-485/RS-232 and backwards) TECHNICAL GUIDE Review date: 20 January, 2017 Revision number: 1.02 TECHNOTRADE LTD CONTENT REVISION
More informationCubeSat Kit Linear EPS Hardware Revision: D
http://www.cubesatkit.com/ TM CubeSat Kit Linear EPS Hardware Revision: D Rechargeable Electrical Power System for CubeSat Kit Bus Applications CubeSat Kit demonstrations CubeSat Kit terrestrial testing
More informationFERROXCUBE DATA SHEET. E16/8/5 E cores and accessories. Supersedes data of September Sep 01
FERROXCUBE DATA SHEET Supersedes data of September 24 28 Sep 1 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.87 mm 1 V e effective volume 75 mm 3 I e effective
More informationOperators and Maintenance Manual. Display EEM MOT 01 FE02.02
1/16 Operators and Maintenance Manual Display EEM MOT 01 FE02.02 Rev. 01 December 2017 2/16 Table of Contents Introduction... 3 1. General information... 3 2. Handling in transport and storage... 4 3.
More informationLOUDSPEAKER OWNER'S MANUAL
CDT ARCHITECTURAL LOUDSPEAKER OWNER'S MANUAL ARCHITECTURAL SPEAKERS IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions.
More informationInstallation Instructions for: Channel Thermocouple Amplifier
Installation Instructions for: 30-2204 4 Channel Thermocouple Amplifier WARNING: This installation is not fo r the electrically or mechanically challenged! Use this sensor with EXTREME caution! If you
More informationDEMO MANUAL DC1415A LTC4265 IEEE 802.3at Power over Ethernet Powered Device Controller DESCRIPTION QUICK START PROCEDURE
DESCRIPTION Demonstration circuit DC5A features the LTC 65, a third-generation Powered Device (PD) controller for Power over Ethernet (PoE) applications. The LTC65 is compliant to the IEEE 80.at standard.
More informationDV2043S7. Level 2 Smart Charger With Dual-Battery Selector. Product Brief. Features. General Description
Product Brief DV04S7 Level Smart Charger With Dual-Battery Selector Features Level Smart Charger evaluation and development board with Dual-Battery Selector Supports System Management Bus specification
More informationEvaluates: MAX MAX16935 Evaluation Kit. General Description. Features and Benefits. Quick Start. Table 1. EN Configuration (JU1)
General Description The MAX16935 evaluation kit (EV kit) demonstrates the MAX16935 high-voltage, current-mode step-down converter with low operating current. The EV kit operates over a wide 3.5V to 36V
More informationATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
More informationTokheim dispensers interface converter (3-wire current loop to RS-485/RS-232 and backwards)
Tokheim dispensers interface converter (3-wire current loop to RS-485/RS-232 and backwards) TECHNICAL GUIDE Review date: 03 May 2013 Revision number: 1.03 PCB board revision: TH-12 TECHNOTRADE LTD CONTENT
More informationVolume CHARGESTORM AB. Charging station model EVA Start and Protected. User Manual Start & Protected
Volume 1 CHARGESTORM AB Charging station model EVA Start and Protected User Manual EVA Start & Protected CHARGESTORM AB User manual EVA Chargestorm AB 2017 Hospitalsgatan 3 SE-602 27 Norrköping, Sverige
More informationAPPLICATION NOTE. ATAK51003-V1 Quick Start Guide. Atmel ATAN0033. Kit Contents
APPLICATION NOTE ATAK51003-V1 Quick Start Guide Atmel ATAN0033 Kit Contents The Atmel ATAK51003-V1 Kit includes the following components: 1 Atmel ATAB5279-V1.2 LF antenna driver 2 LF antenna modules 1
More informationInstallation Instructions
Installation Instructions Ecosine evo IP21 cover kits Ecosine evo FN 3440 / FN 3441 (50 Hz) for 380 415 V AC FN 3450 / FN 3451 (50 Hz) for 440 500 V AC FN 3452 / FN 3453 (60 Hz) for 440 480 V AC Schaffner
More informationREV. 1.3 FS DS-13_EN MAY FORTUNE' Properties. Datasheet FS For wide range thermal measurement application. For Reference Only
REV. 1.3 FS9168-017-DS-13_EN MAY 2014 Datasheet FS9168-017 For wide range thermal measurement application Fortune Semiconductor Corporation 富晶電子股份有限公司 23F., No.29-5,Sec. 2, Zhongzheng E. Rd., Danshui Dist.,
More information5 Year / 160,000 km (100,000 mi) ** 1 Year / 30,000 km (19,000 mi) 3 Year / 100,000 km (62,000 mi)
WARRANTY REGISTRATION FORM 5 Year / 160,000 km (100,000 mi) WARRANTY Please read & fill out the attached warranty registration form to activate your warranty Your warranty registration must be received
More informationFGM1190 Glass Tube Variable Area Flowmeters
Change from one to two columns Spare Parts List SPL/FGM1190-EN Rev. C FGM1190 Glass Tube Variable Area Flowmeters Series D10A1187 / 95 / 97 / 98 Measurement made easy Change from two to one column 1 Safety
More informationRECHARGE STATION OPERATION MANUAL. Version
RECHARGE STATION OPERATION MANUAL Version 1.0-0712 2014 by VirTra Inc. All Rights Reserved. VirTra, the VirTra logo are either registered trademarks or trademarks of VirTra in the United States and/or
More informationWarranty Statement - Terms and Conditions
ATS Diesel Performance warrants to the original purchaser that any items purchased shall be covered for defects in material and/or workmanship. ATS reserves the right to determine the course of action
More informationIV-3 VFD Shield for Arduino. Assembly Manual
June 2014 Table of Contents 1 Overview Features Applications 3 3 3 2 Assembly Hints 4 3 PCB Overview 5 4 Circuit Diagram 6 5 Assembly Diodes and IC socket Electrolytic capacitors Ceramic capacitors 10K
More informationEvaluates: MAX17612C 4.5V to 60V, 250mA, Current-Limiter with Reverse Protection. MAX17612C Evaluation Kit. Quick Start. General Description.
Click here for production status of specific part numbers. General Description The MAX76C evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX76C 4.5V to 60V,
More informationINSTALLATION INSTRUCTIONS THERMOCOUPLE EXPANSION MODULE
INSTALLATION INSTRUCTIONS THERMOCOUPLE EXPANSION MODULE 2650-1846-77 Rev. B Details: Temperature Rating: -40 C to 85 C/-40 F to 185 F Vibration Specification: 20 g continuous, 50 g shock Inputs: o 4 EGT
More informationApplication Note. DA1468x Battery Charging AN-B-035
Application Note AN-B-035 Abstract This document describes the battery charging operation for a lithium-ion or lithium-polymer battery using the DA1468x device. Contents Abstract... 1 Contents... 2 Figures...
More informationMAINE LEMON LAW SUMMARY
MAINE LEMON LAW SUMMARY EXECUTIVE SUMMARY TIME PERIOD FOR FILING CLAIMS ELIGIBLE VEHICLE Earlier of (1) three years from original delivery to the consumer, or (2) the term of the express warranties. Any
More informationCALIBRATION PROCEDURE NI Channel, ±10 V, 16-Bit Analog Voltage Output Module
CALIBRATION PROCEDURE NI 9264 16-Channel, ±10 V, 16-Bit Analog Voltage Output Module This document contains the verification and adjustment procedures for the National Instruments 9264. For more information
More informationECT 300 Perpetuum Kit Ultra Low Voltage DC/DC Converter for Thermal Energy Harvesting
V1.0 ECT 300 Perpetuum Kit Ultra Low Voltage DC/DC Converter for Thermal Energy Harvesting Covered by at least following patents: W098/36395 DE 10025561 DE 10062028 DE 10150128 DE 10155125 DE 10063305
More informationModel WS-6020U Solar Station QUICK SETUP GUIDE
Model WS-6020U Solar Station QUICK SETUP GUIDE Solar-powered Transmitter: Remote transmission of outdoor temperature to the Solar Station by 915 MHz signals LCD displays the outdoor temperature data Recharge
More informationPMP40001 Test Results
Test Report June 2016 PMP40001 Test Results 1 General 1.1 Purpose This test report is to provide the detailed data for evaluating and verifying the PMP40001 which employs one Buck-Boost Controller ----
More informationVolume CHARGESTORM AB. Charging station model EVA Connected. User Manual Connected
Volume 1 CHARGESTORM AB Charging station model EVA Connected User Manual EVA Connected CHARGESTORM AB User manual EVA Connected Chargestorm AB 2017 Hospitalsgatan 3 SE-602 27 Norrköping, Sverige Phone:
More informationUser s Guide Includes Mounting, Installation, and Product Registration
User s Guide Includes Mounting, Installation, and Product Registration 250 T M About OutBack Power Systems OutBack Power Systems is a leader in advanced energy conversion technology. Our products include
More informationHeliporter. Owner s Manual. 150 Series. by Paravion Technology, Inc.
Heliporter by Paravion Technology, Inc. Owner s Manual 150 Series Introduction Congratulations, you have purchased one of the finest helicopter ground handling vehicles on the market today. We at Paravion
More informationMechanical Spiral Sensor
Installation Manual Model 6005-1 Mechanical Spiral Sensor No part of this instruction manual may be reproduced, by any means, without the written consent of Geokon, Inc. The information contained herein
More informationNickel Cadmium and Nickel Hydride Battery Charging Applications Using the HT48R062
ickel Cadmium and ickel Hydride Battery Charging Applications Using the HT48R062 ickel Cadmium and ickel Hydride Battery Charging Applications Using the HT48R062 D/: HA0126E Introduction This application
More information