User MANUAL. PG Series. Ultrasound Series. Ultrasound series. made in the USA with US & imported parts

Transcription

1 User MANUAL PG Series & Ultrasound Series PG Series Ultrasound series made in the USA with US & imported parts

2 Copyright 2010 OAKWORKS, Inc. Notice This manual was originally drafted and approved in the English language. Printed in USA All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without prior written consent of OAKWORKS, Inc. OAKWORKS is a registered trademark of OAKWORKS, Inc. The information contained in this document is subject to change without notice and should not be construed as a commitment by OAKWORKS, Inc. OAKWORKS, Inc. assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. OAKWORKS, Inc. shall not be liable for incidental or consequential damages in connection with or arising out of the furnishing, performance, or use of this document and the program material which it describes.

3 Table of Contents Product Use Description...1 Important Safety Instructions Symbol Identification...1 Safety Instructions Product Description & Photo PG PG PG General - General with Fowler - General 3 Section...6 Women s Imaging...7 Multi-Specialty...8 Echocardiography...9 Vascular with Fowler...10 Vascular...11 Installation Grounding...12 Directions for Use Control Operations PG PG350 & PG General General with Fowler, Multi-Specialty & Women s Imaging Electric Sliding Cardio Panel Tables Vascular with Fowler Vascular Side Rail Use Retractable Foot Rest (stirrup) Use Detachable Arm Board Use Adjustable Angle Back Support Central Base Locking System Locking Casters Use...21 Manual Adjustable 4 Position Leg Rest Use Procedure Tray Sliding Cardio Panel Vascular Integrated Foot Board Vascular Patient Restraint Strap Paper Roll Holder Table Extender QuickLock Face Rest Patient Lift Compatible Base T-Rail Adapter Hand Control Safety Lock-Out Cleaning & Disinfection...27 Inspections & Maintenance...27 Warranty Information...27 Model Number & Serial Number...28 Specifications Product Specifications Environmental Conditions Electrical Specifications Guidance and manufacturer s declaration - Electromagnetic emissions Recommended separation distances Guidance and manufacturer s declaration - Electromagnetic immunity Contact Information... back cover

4 Product use description / important safety instructions product use description The PG and Ultrasound Tables are used to support the patient during examinations and procedures. It is intended to be operated by a healthcare professional in a medical environment. No special training is required but a review of the following Safety Instructions is important for the safety of the operator and patient. The healthcare professional should read and understand this entire manual before use with a patient. There are no known contradictions to the use of this equipment. Symbol Identification This symbol, when used in this manual and on product labels, represents a caution warning. Be sure to read and comply with all precautions and warnings. This symbol, when used in this manual and on product labels, warns against an electrical shock hazard. Be sure to observe and comply with all warnings. This symbol, when used in this manual or on product labels, indicates a Protective Earth (Ground) Terminal. This symbol, when used in this manual or on product labels, indicates that the product should be protected from moisture. The humidity specifications for Transport & Storage are listed in the environmental conditions section of this manual. This symbol is used to indicate that the operator should consult the user manual. This symbol, when used in this manual and on product labels, indicates that the table and components are a Type B Applied Part pursuant to IEC : ~ ---- This symbol, when used in this manual or on product labels, indicates alternating current (AC). This symbol, when used in this manual or on product labels, indicates direct current (DC). important safety instructions caution Read and Save These Instructions The Fowler (Backrest) and Leg Rest sections are not designed to support the entire weight of the patient. Do not sit on the Fowler or Leg rest sections. The table is not to be used as a gurney or to transport patient from room to room. When the footboards are in the down position, it is possible for them to hit the ground in low height and high tilt conditions. Operate the table with the footboard up if possible. If not, then check ground clearance to prevent damage to the footboard. Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in this manual. 1

5 Important Safety instructions The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in increased emissions or decreased immunity of the table. The table should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the table should be observed to verify normal operation in the configuration in which it will be used. The table is designed to be a stand alone table used with hand held ultrasound probes. This table must not be modified or incorporated into any other equipment. As with any moving mechanism there are potential pinch points around and underneath the table top. It is the responsibility of the operator of this equipment to insure that bystanders are not in the area below or around this equipment during operation. Proper operation of this equipment is very important for the safety of the operator, patient, and any other individuals in the area of this equipment. Directions for use of this equipment are described in this manual. The operator should read these sections carefully. Weight Limit: (patient and accessories) 550 lbs./250 kg. Do not exceed. Be certain that the table is completely lowered without any tilt being present prior to discharging an ambulatory patient. The patient may lose balance and fall. This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or nitrous oxide. Do not put excessive weight on the extended end (beyond the main top) of the cardio panel. Maximum capacity is 150 lbs. / 68 kg. When lowering the table or using the Trendelenburg functions, make sure there is nothing underneath the table top that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.). Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons. All motor actuators & lifting columns have a duty cycle of approximately 10%, meaning 2 minutes of operation within a 20 minute period. Exceeding this duty cycle can damage this equipment. WARNING To reduce the risk of burns, fire, electric shock or injury to persons: 1. Unplug this furnishing from the electrical outlet before cleaning. 2. Unplug from outlet before adding or removing parts. 3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use. 4. Keep the cord away from heated surfaces. 5. Never drop or insert any object into any opening. 6. Do not use outdoors. 7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. danger For procedures where accidental table motion is a safety concern, the handset control must be locked out. Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in this manual. Electrical Shock Hazard. The power supply/control module is located under the table seat. No user serviceable parts are inside the control box. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables connected to the power supply. 2

6 Product Description PG350 Paper roll holder foot control Manual 4 position leg rest Electric Backrest Electric Lift Towers Locking Casters optional hand control Standard Specifications Motion 1 Motion 2 Motion 3 Motion 4 Foot Control Paper Roll Holder Table Voltage Options Table Capacity Widths Length - 3 section 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-80º Fowler Manual 4 Position Leg Rest All powered Motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Fowler 34 (86 cm.), Seat 24 (61 cm.), Leg Rest 13 (33 cm.) Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) or 4 (10 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Side Rails (2) Retractable Foot Rests (Stirrups) Hand Control - All powered motions Patient Lift Compatible Base Accessories T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 3

7 Product Description PG300 Paper roll holder foot control Electric Backrest optional hand control Electric Lift Towers Locking Casters Standard Specifications Motion 1 Motion 2 Motion 3 Foot Control Paper Roll Holder Table Voltage Options Table Capacity Widths Length - 2 section 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-80º Fowler All powered Motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Fowler 34 (86 cm.), Seat 38 (97 cm.) Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) or 4 (10 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Side Rails (2) Hand Control - All powered motions Patient Lift Compatible Base Accessories T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 4

8 Product Description PG200 foot control Paper roll holder Electric Lift Towers optional hand control Locking Casters Standard Specifications Motion 1 Motion 2 Foot Control Paper Roll Holder Table Voltage Options Table Capacity Widths Length 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg All powered Motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Rectangular Top 72 (183 cm.) Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) or 4 (10 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Side Rails (2) Hand Control - All powered motions Patient Lift Compatible Base Accessories T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (per end) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 5

9 Product Description General Shown with Optional Fowler (Back Rest) up to 75º Fowler angle Paper roll holder (1) Upholstered Top hand control Optional electric Fowler (1) Electric Lift Towers (2) optional foot control Locking Casters (4) Standard Specifications Motion 1 Motion 2 Motion 3 (option) Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-75º Fowler Hand Control 3 or 2 section General Motions section General Motions 1 & 2 Paper Roll Holder Accommodates up to 21 (53.3 cm.) rolls (roll not included) Table Voltage Options 120V/60Hz or 230V/50Hz Table Capacity 550 lbs. (250 kg.) (patient and accessories) Widths 27 (69 cm.) or 30 (76 cm.) Length - 1 section Rectangular Top 72 (183 cm.) Length - 2 section Fowler 34 (86 cm.), Seat 38 (97 cm.) Length - 3 section Fowler 34 (86 cm.), Seat 24 (61 cm.), Leg Rest 13 (33 cm.) 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Electric Fowler Manual 4 Position Leg Rest Central Base Locking System Sliding Cardio Panel - Electric or Manual (30 Width & Left side only) Side Rails (2) Adjustable access/back support - Left (3, 2 &1 section tables) Adjustable access/back support - Right (3, 2 &1 section tables) Foot Control - All powered motions Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only on 3 section tables) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 6

10 Product Description Women s Imaging up to 75º Fowler angle Paper roll holder (1) Electric Fowler Adjustable angle back support (Right side is standard) hand control Adjustable Stirrups (2) Electronic Lift Towers (2) optional foot control Manual Adjustable Four Position Leg Section Locking Casters (4) Standard Specifications Motion 1 Motion 2 Motion 3 Motion 4 Hand Control Paper Roll Holder Table Voltage Options Table Capacity Widths Length - 3 section 4 (10 cm.) Locking Casters Retractable Foot Rests (Stirrups) Adjustable Access/ Back Support - Right Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-75º Fowler Manual Adjustable 4 Position Leg Rest All powered motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Fowler 34 (86 cm.), Seat 24 (61 cm.), Leg Rest 13 (33 cm.) Locking / Unlocking Casters for mobile or permanent positioning Adjustable footrests to accommodate any patient or procedure Manual 4 position back support for patient positioning 3 (8 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Sliding Cardio Panel - Electric or Manual (30 Width & Left side only) Side Rails (2) Adjustable access/back support - Left side Foot Control - All powered motions Procedure Tray (30 Width only) Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 7

11 Product Description Multi-Specialty up to 75º Fowler angle Electric fowler Paper roll holder (1) Adjustable angle back support (2) hand control Adjustable Stirrups (2) Electronic Lift Towers (2) Manual Adjustable Four Position Leg Section Central Base Locking System foot control Locking Casters (4) Standard Specifications Motion 1 Motion 2 Motion 3 Motion 4 Hand & Foot Controls Paper Roll Holder Table Voltage Options Table Capacity Widths Lengths - 3 section Adjustable Access/ Back Supports Central Base Locking System 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-75º Fowler Manual Adjustable 4 Position Leg Rest All powered motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Fowler 34 (86 cm.), Seat 24 (61 cm.), Leg Rest 13 (33 cm.) Left & Right side Manual 4 position back supports for patient positioning Easily lockable system for extra security Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Sliding Cardio Panel - Electric or Manual (30 Width & Left side only) Side Rails (2) Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only on 3 section tables) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 8

12 Product Description Echocardiography up to 75º Fowler angle Electric Fowler Paper roll holder (1) Sliding Cardio Panel hand control Adjustable angle back support (Right side is standard) Electronic Lift Towers (2) Locking Casters (4) foot control - manual cardio foot control - electric cardio Standard Specifications Motion 1 Motion 2 Motion 3 Hand Control Paper Roll Holder Table Voltage Options Table Capacity Width Lengths - 2 section Adjustable Access/ Back Support - Right Manual Sliding Cardio Panel - Left side only 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered ±15º Trendelenburg/ Reverse Trendelenburg Powered 0-75º Fowler All powered motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 30 (76 cm.) Fowler 34 (86 cm.), Seat 38 (97 cm.) Manual 4 position back support for patient positioning Adjusts open up to 15 (38.1 cm.) Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) Comfort Foam Terra Touch 359 lbs. (163 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Sliding Cardio Panel - Electric Upgrade (Left side only) Side Rails (2) Foot Control - All powered motions Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 9

13 Product Description Vascular with Fowler up to 70º reverse Trendelenburg Electric Fowler Paper roll holder (1) Side Rail (2) Patient Restraint Strap (1) hand control Electronic Lift Towers (2) optional foot control Integrated Foot Board (2) Locking Casters (4) Standard Specifications Motion 1 Motion 2 Motion 3 Motion 4 Hand Control Paper Roll Holder Table Voltage Options Table Capacity Widths Lengths - 2 section Integrated Foot Board Patient Restraint Strap Side Rails (2) 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Powered ( cm.) Height Range Powered 15º Trendelenburg Powered 0-70º Reverse Trendelenburg Powered 0-75º Fowler All powered motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Fowler 34 (86 cm.), Seat 38 (97 cm.) Split, drop away Must be used during all procedures Increased stability and security for patients Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) Comfort Foam Terra Touch 425 lbs. (205 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Central Base Locking System Sliding Cardio Panel - Manual (30 Width & Left side only) Adjustable access/back support - Left side Adjustable access/back support - Right side Foot Control - All powered motions Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 10

14 Product Description Vascular up to 40º reverse Trendelenburg Paper roll holder (1) Patient Restraint Strap (1) hand control Side Rail (2) Electronic Lift Towers (2) optional foot control Standard Specifications Motion 1 Motion 2 Motion 3 Hand Control Paper Roll Holder Table Voltage Options Table Capacity Widths Length - 1 section Integrated Foot Board Patient Restraint Strap Side Rails (2) 4 (10 cm.) Locking Casters Padding Upholstery Table Weight * Warranty Safety Listings Integrated Foot Board (2) Powered ( cm.) Height Range Powered 15º Trendelenburg Powered 40º Reverse Trendelenburg All powered motions Accommodates up to 21 (53.3 cm.) rolls (roll not included) 120V/60Hz or 230V/50Hz 550 lbs. (250 kg.) (patient and accessories) 27 (69 cm.) or 30 (76 cm.) Rectangular Top 72 (183 cm.) Split, drop away Must be used during all procedures Increased stability and security for patients Locking / Unlocking Casters for mobile or permanent positioning 3 (8 cm.) Comfort Foam Terra Touch 425 lbs. (205 kg.) 3 year parts, 1 year labor FDA, cetlus, CE marked options Locking Casters (4) Central Base Locking System Sliding Cardio Panel - Electric or Manual (30 Width & Left side only) Adjustable access/back support - Left side Adjustable access/back support - Right side Foot Control - All powered motions Patient Lift Compatible Base Accessories Detachable Arm Board T-rail Adapter QuickLock Face Pad Accessory Mounting Plate (Per end - Fowler end only) Table Extender - 12 (30.5 cm.) Long For electrical specs, see Specifications section. 11

15 installation All tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. (see Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard and where the controls are located to your liking and are conveniently accessible. Be sure access to plug is not blocked for disconnecting the table from power. Grounding DANGER Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding pin. The pin must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. See U.S. sample below. Grounding Methods Correct Implementation Incorrect Implementation Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet; have a proper outlet installed by a qualified electrician. 12

16 directions for use control operations - PG200 caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) The Foot Control and optional Hand Control operate all functions of the table with the touch of a button. Follow the directions below to access these functions. optional hand control Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Height UP: elevates tabletop Trendelenburg functions are preserved during elevation Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Down: lowers tabletop Trendelenburg functions are preserved during lowering 13

17 directions for use control operations - PG350 & PG300 caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) optional hand control Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Height Up: elevates tabletop Trendelenburg functions are preserved during elevation Fowler Up: activates fowler up to 75º Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Down: lowers tabletop table is lowered from any position Fowler Down: activates fowler down to level position 14

18 directions for use control operations - general caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) The Hand Control and optional Foot Control operate all functions of the table with the touch of a button. Follow the directions below to access these functions. Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height UP: elevates tabletop Trendelenburg functions are preserved during elevation Height Down: lowers tabletop Trendelenburg functions are preserved during lowering Trendelenburg function Height function optional 2 function foot control 15

19 directions for use control operations - Multi-specialty, women s imaging & general with fowler caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Up: elevates tabletop Trendelenburg functions are preserved during elevation Height Down: lowers tabletop table is lowered from any position Height function Fowler Up: activates fowler up to 75º Fowler Down: activates fowler down to level position Trendelenburg function Fowler function optional 3 function foot control 16

20 directions for use control operations - Multi-specialty & echocardiography with electric sliding panel caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. Do not sit on the cardio panel. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Up: elevates tabletop Trendelenburg functions are preserved during elevation Height Down: lowers tabletop Trendelenburg functions are preserved during lowering Fowler Up: activates fowler up to 75º Fowler Down: activates fowler down to level position Height function Fowler function Cardio Close: closes the cardio panel Cardio Open: opens the cardio panel Trendelenburg function Cardio function optional 4 function foot control 17

21 directions for use control operations - vascular with fowler caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. The Patient Restraint Strap must be used during all procedures. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Up: elevates tabletop Trendelenburg functions are preserved during elevation Height Down: lowers tabletop Trendelenburg functions are preserved during lowering Fowler Up: activates fowler up to 75º Fowler Down: activates fowler down to level position Height function Fowler function Vascular Tilt Up: Vascular tilt up to 25º Vascular Tilt Down: Lowers the vascular tilt Trendelenburg function Vascular function optional 4 function foot control 18

22 directions for use control operations - vascular caution Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unattended. The Patient Restraint Strap must be used during all procedures. When lowering the table or using the Trendelenburg functions, make sure there is nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.) Reverse Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue. Trendelenburg: activates tilt up to 15º positioning stops when table is level; press again to continue Height Up: elevates tabletop Trendelenburg functions are preserved during elevation Height Down: lowers tabletop table is lowered from any position Vascular Tilt Up: Vascular tilt up to 25º Height function Vascular Tilt Down: Lower the vascular tilt Trendelenburg function Vascular function optional 3 function foot control 19

23 directions for use side rail use To lower side rails Push side rail in lightly towards the center of the table, then push locking knob down towards the table base. Fold side rails down and under the table. To raise side rails Grasp side rail and rotate to the raised position. When fully up, the side rail will lock into position. Check that the rail is locked by applying light outward pressure. retractable foot rests (stirrup) use caution Pinch Point - Keep fingers away from pinch point. 1. Fully lower the manual adjustable foot rest to allow access to the stirrup. 2. Grasp Stirrup handle & pull out firmly while lifting slightly. Pull fully out. 3. Fold out to fully open position. To store stirrups, lift slightly, rotate towards the middle of the table and fold the foot rest down. Then lift slightly and push into the storage position. 4. To rotate stirrup to the desired angle, lift slightly and move to the desired position. There are 3 detent positions. Stop lifting and move slightly left or right for the nearest detent position. 5. To reduce stirrup length, lift the handle slightly and push into desired position. Stirrup will automatically lock into nearest detent position. detachable arm board use caution Do not put excessive weight or pressure on the Arm Board. This product can be used on any of Oakworks ultrasound tables with a T-Rail Adapter and can support a variety of positioning configurations. 20

24 directions for use adjustable angle back support caution Do not sit on the Adjustable Angle Back Support. (Max Capacity 150 lbs. (68 kg.)) To raise back support Lift panel to desired angle. Panel will automatically lock into nearest set point. Panel can be raised to a full 90º position. To lower back support Press support bar against plastic plate and hold until back support is lowered to desired position. central base locking system Locking the System Press down on locking arm with your foot to lock table to the floor. un-locking the system Lift up on locking arm with your foot to unlock table from the floor. locking casters use All four casters should be locked at all times during use with a patient. locking the casters 1. Place your shoe on the end of the casters locking tab. 2. Press firmly downward until you here a clicking noise and the caster is locked. un-locking the casters 1. Place your shoe on top of the casters locking tab. 2. Press firmly inward and downward until you here a clicking noise and the caster is unlocked. 21

25 directions for use manual adjustable four position leg rest use caution Do not sit on the Fowler (Backrest) or Leg Rest. (Max Capacity 150 lbs. (68 kg.)) To raise the leg Rest Raise the leg rest by pulling it up from the lower center end of the table to the proper position for the procedure. Use a slow or medium speed. If you raise the leg rest too fast, the height locking mechanism will not engage. The leg rest will lock into the closest height position. To lower the leg Rest Raise the leg rest above horizontal to unlock the latch. Lower the leg rest to the fully down position. For intermediate positions, follow directions to raise the leg rest. procedure tray use caution Make sure the Leg Rest is fully lowered before using the procedure tray. Do not sit or push on the Procedure Tray when extended from the seat. Maximum Weight rating of 15 lbs. (6.8 kg.) Slide out the Procedure Tray by pulling on the center slot of the tray holder until the tray stops. After a procedure is performed, remove the Procedure Tray with both hands at the side notches from the tray holder. Discard fluids, clean and place back into tray holder. cleaning and disinfecting instructions If fluid spill under the seat cushion, follow these instructions: 1. Remove the seat pad by pulling up from the edge. The pad is held on by Velcro. 2. Pull out the 2 pins on both sides of the metal plate near the end of the Procedure tray holder. Slide the tray holder and Procedure Tray out from the seat section. 3. Unscrew the 4 black handles at the corners of the metal plate. Slide the metal plate off from the seat section and disinfect all surfaces. 22

26 directions for use sliding cardio panel use caution Make sure all parts of the patient s anatomy are clear of the sliding cardio panel when closing. Do not sit or put excessive weight on the sliding cardio panel. (Max Capacity 150 lbs. (68 kg.)) The Sliding Cardio Panel allows you to adjust the opening of the size you need, up to 15 (38 cm.). prior to moving the Cardio panel Make sure patient weight is not on the panel. manual cardio panel 1. Grasp the Cardio Panel. 2. Lift up slightly. 3. Slide the panel to the desired opening width. electric cardio panel 1. Use the hand control or optional foot control to open the cardio panel to the desired opening width. integrated foot board use caution Mount & dismount the table in the flat position. Do not use the foot board as a step to mount the table. When the foot boards are in the down position, it is possible for them to hit the ground in low height or trendelenburg conditions. Operate the table with the foot board up if possible. If not, then check ground clearance to prevent damage to the foot boards. Make sure the foot boards are securely positioned before the patient places weight on them. The Patient Restraining Strap must be used during all procedures to prevent the patient from falling off the table. 2" (5 cm.) position 4" (10 cm.) position staggered position anti-skid surface to raise the foot board to the 2 (5 cm.) position With footboard in the down position, grasp the rod at 90º bend. Push into the table until it stops. Grasp with one hand at 90º bend and rotate foot board 180º with second hand until in the up position. Check locking by moving footboard left and right. Grasp with one hand at 90º bend and pull away from table to lock in up position. 23

27 directions for use to move the foot board to the 4 (10 cm.) position Grasp the rod at 90º bend and push into the table to unlock. With your second hand, grasp the foot board & rotate 180º to the down position. Grasp the rod at 90º bend and pull to the 4 (10 cm.) position. With your second hand, grasp the foot board and rotate 180º to the up position Grasp the rod at 90º bend and pull away from the table to lock in position. Check locking by moving footboard left and right. vascular patient restraining strap use caution The Vascular Patient Restraining Strap must be used during all procedures to prevent from falling off the table. vascular flat top tables Install the strap under the rail to the top. vascular with fowler tables Install the strap under the Fowler section & above all rails. paper roll holder use To load the paper, pull down on the 2 paper holder support arms located on the under side of the Fowler section and rotate to the 90º position. Insert the rod through the paper roll and place the rod into the holes in the support arms. Pull paper and thread through the straps across the upholstered top to keep in place. Note: The paper hold down strap is attached with Velcro. This allows strap tension adjustment if necessary. 24

28 directions for use table extender use caution The Table Extender lengthens the table allowing for access to the patient s neck for exams such as carotid artery and thyroid. Do not put excessive weight or pressure on the table extender. note: You will need an accessory mounting plate in order to use the table extender. 1. Locate the Accessory Mounting Plate. 2. Insert the Table Extender tubes into the Accessory Mounting Plate. quicklock face rest * U.S. Patent #5,177,823 caution Do not put excessive weight or pressure on the Quicklock Face Rest. Do not extend the dowels of the Quicklock Face Rest 3 (7.6 cm.) from the Fowler (Backrest) section. Double articulating action provides nearly limitless positioning options with the QuickLock Face Rest. The adjustable pad takes pressure off sensitive facial areas while providing superb support. The QuickLock Face Rest can be used in both prone and supine positioning and folds out of the way when not in use. Adjustments are made easily by loosening the cam locks, adjusting for height and angle and then locking the cam locks into the desired position. QuickLock Face Rest note: You will need an accessory mounting plate in order to use the QuickLock face rest. Important Safety Note: Maximum Distance from edge of Table = 3 (7.6 cm.) Insert dowels into Accessory Mounting Plate Loosen Cam Locks & adjust face rest into place. Tighten the Cam Locks. The Face Rest can be used for either prone or supine positioning. 25

29 directions for use patient lift compatible base This option allows the use of patient lifts. The high clearance base permits patient lifts to slide easily under the center of the table for stable transfers. This option must be ordered with table. Includes larger, 5 diameter Heavy Duty locking Casters Central Base Locking System is not available with this option. T-rail adapter use Clamp & pole not included. The T-Rail Adapter can be attached at designated locations on the table, allowing the use of any t-rail accessory. Attach or remove using the knobs shown. NOTE: on 27 wide tables, the paper roll holder support arm must be folded down to allow installation of the T-Rail adapter next to the paper roll holder. After installation, the paper roll holder support arm can be raised to the normal position. hand control safety lock out On specialty table models, there is a hand control lock out located next to the side rail. 26

30 cleaning & disinfection / inspections / warranty cleaning & disinfection Before cleaning with any liquid cleaner be sure to unplug the power cord from the outlet. warning Use a 10% sodium hypochlorite (bleach) solution or Recommended Disinfectants on all surfaces. Clean all sides of each upholstered section. Follow the directions on the disinfectant and wipe off excess. Recommended Disinfectants Protex, MadaCide, Accell TB, Virox Note: Damage caused by unapproved substances will not be covered under the warranty. DO NOT use citrus based cleaners or other strong cleaners, such as alcohol, acetone, higher concentrations of bleach or other products that contain high concentrations of these substances. DO NOT DO NOT expose the fabric to temperatures below 50 F/10 C or above 104 F/40 C. expose the fabric to direct sunlight, adhesives, liquids, or abrasive materials. inspections & maintenance RECOMMENDED REGULAR INSPECTIONS (monthly or local standard) Check for damage to the power, hand control or foot control cables. Visually inspect components for obvious damage that could cause problems during operation. RECOMMENDED PERIODIC INSPECTIONS (yearly or local standard) Check for damage to the power, hands control or foot control cables and all visible wiring. Visually inspect components for obvious damage that could cause problems during operation. Check all mechanical functions using the hand control. Repeat using the foot control. Check for abnormal noises. Replace any missing or illegible labels. Check that all fasteners are present and fastened securely. Check table grounding. Clean unusual buildup of dirt on the chair and/or parts of the chair not normally cleaned on a regular basis. Check for tears or cracks in the upholstery. MAINTENANCE No specific maintenance tasks are required. Oakworks medical tables/chairs are designed and built to provide many years of dependable service. Please follow local regulations and laws when disposing of the electrical components used in this chair. For all Customer Service related problems refer to the Service Manual warranty View complete warranty details at 27

31 model number & serial number model & serial numbers The model number and serial number are located on the lift column at the foot end of the table. Model Number Serial Number USGNG MTTZZ2S Ser#: USF US G2 30 x x 72 3M/TT/2S TTSKYBLUE 01/04/2013 Order#: Notes: Sample Product Label Model Numbers and Serial Numbers always start with a letter. Model Number description usgnxxxxxxxx3mttxxxx Options Spaces not used Fabric: TerraTouch Padding: Comfort Plus Table Top Length Minimum Table Height Table Width Top G1 G2 G3 V1 V2 Base GN: Ultrasound Series EX: PG Series Table US: Ultrasound Series PG: PG Series 28

32 specifications product specifications Weight lbs. ( kg.) Shipping Weight lbs. ( kg.) Lifting Capacity 550 lbs. (250 kg.) environmental conditions Conditions Temperature Humidity Atmospheric Pressure Normal Use 50 (10 C) to 104 (40 C) 20% to 60% RH 98 to 105 kpa Storage & Transport -20 (-29 C) to 135 (57 C) 20% to 95% RH 98 to 105 kpa electrical specifications Designed for: North America Europe Japan Input Service 120 VAC/15 amp/60 Hz 230 VAC/10 amp/50/60 Hz 100 VAC/10 amp/50/60 Hz Maximum Momentary Current Consumption Voltage Output to Actuators Electric Shock Protection Tabletop Applied Part 4.0 amps 2.0 amps 5.0 amps 24 VDC 24 VDC 24 VDC Class 1 Equipment Class 1 Equipment Class 1 Equipment Type B Applied Part Type B Applied Part Type B Applied Part Ingress Protection Rating Made of Operation IPX0 IPX0 IPX0 Intermittent Operation MAX 2 minutes ON 18 minutes off Intermittent Operation MAX 2 minutes ON 18 minutes off Intermittent Operation MAX 2 minutes ON 18 minutes off 29

33 specifications Guidance and manufacturer s declaration - electromagnetic emissions The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Emissions Test Compliance Electromagnetic environment - guidance RF emissions CISPR 11 RF emissions CISPR 11 Harmonic emissions IEC Voltage fluctuations / flicker emissions IEC Group 1 Class A Class A Complies The table uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. The table is suitable for use in all establishments other than domestic and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes. Recommended separation distances between portable and mobile RF communications equipment and the table The table is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. the customer or the user of the table can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the table as recommended below, according to the maximum output of the communications equipment. Rated maximum output power of transmitter Separation distance according to frequency of transmitter (m) 150 khz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz W d = 1.2 P d = 1.2 P d = 2.3 P For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. transmitter manufacturer. NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. 30

34 specifications Guidance and manufacturer s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Immunity Test IEC test level Compliance level Electrostatic discharge (ESD) IEC Electrical fast transient/ burst IEC Surge IEC Voltage dips, short interruptions and voltage variations on power supply input lines IEC Power frequency (50/60 Hz) magnetic field IEC ±6 kv contact ±8 kv air ±2 kv for power supply lines ±1 kv for input/output lines ±1 kv line(s) to line(s) ±2 kv line(s) to earth <5 % UT (>95 % dip in UT) for 0,5 cycle 40 % UT (60 % dip in UT) for 5 cycles 70 % UT (30 % dip in UT) for 25 cycles <5 % UT (>95 % dip in UT) for 5 sec ±6 kv contact ±8 kv air 3 A / m 3 A / m ±2 kv for power supply lines Not applicable ±1 kv line(s) to line(s) ±2 kv line(s) to earth <5 % UT (>95 % dip in UT) for 0,5 cycle 40 % UT (60 % dip in UT) for 5 cycles 70 % UT (30 % dip in UT) for 25 cycles <5 % UT (>95 % dip in UT) for 5 sec NOTE UT is the a.c. mains voltage prior to application of the test level. Electromagnetic environment - guidance Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30 %. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. Mains power quality should be that of a typical commercial or hospital environment. If the user of the table requires continued operation during power mains interruptions, it is recommended that the table be powered from an uninterruptible power supply or a battery. Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment. 31

35 specifications Guidance and manufacturer s declaration - electromagnetic immunity The table is intended for use in the electromagnetic environment specified below. The customer or the user of the table should assure that it is used in such an environment. Immunity Test IEC test level Compliance level Electromagnetic environment - guidance Portable and mobile RF communications equipment should be used no closer to any part of the table, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance d = 1.2 P d = 1.2 P 80 MHz to 800 MHz d = 2.3 P 800 MHz to 2,5 GHz Conducted RF IEC Radiated RF IEC Vrms 150 khz to 80 MHz 3 V/m 80 MHz to 2,5 GHz 3Vrms 3V/m Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in meters (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of equipment marked with the following symbol: NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the table is used exceeds the applicable RF compliance level above, the table should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting or relocating the table b Over the frequency range 150 khz to 80 MHz, field strengths should be less than 3 V/m. 32

36 User MANUAL PG Series & Ultrasound Series Contact Information: Oakworks Inc. 923 East Wellspring Road New Freedom, PA Phone: FAX: CONFORMS TO: ANSI/AAMI STD ES IEC STD rd Edition IEC STD rd Edition IEC STD rd Edition Certified to CAN/CSA STD C22.2 No CB TEST CERTIFICATE AND REPORT Manual Part Number MMMNST0018 Revision level: A 1 st Edition, April nd Edition, March rd Edition, March th Edition, August 2013 English, Printed in USA made in the USA with US & imported parts