Dimmable LED Drivers SMALL SMART EFFICIENT
|
|
- Linette Powers
- 5 years ago
- Views:
Transcription
1 Dimmable LED Drivers SMALL SMART EFFICIENT Revision: January 2017
2 Our Target Markets Indoor Residential and Commercial lighting Outdoor street and area lighting Office lighting Warehouses, manufacturing facilities, and Large retail store application Parking garages Architectural lighting Display / Signage Stage Lighting (entertainment, concert)
3 About ERP ERP designs and manufactures energy-efficient LED drivers/power supplies for a wide range of lighting applications: from residential to commercial, industrial, outdoor, office buildings, architectural and stage lighting. Small, yet powerful, ERP products deliver an industry-leading combination of compact size, extensive dimmer compatibility, and high efficiency at competitive cost. Headquartered in Moorpark, CA, ERP owns and operates its own ISO 9001 certified manufacturing facility to ensure quality of design, sourcing, production and testing. Industry leader in high-efficiency (high-power-saving) & high-density (small footprint) LED drivers/power supplies Product offerings include standard and custom solutions for LED Lighting U.S.A. Headquarters in Moorpark, California, with sales/marketing, R&D, and technical support to serve the North-American market China Operations Center in Zhuhai include document center, QA, R&D, manufacturing, and sales / technical support to serve China and Asia Our Presence Factory 3
4 ERP Manufacturing ERP products are manufactured in our wholly owned manufacturing facility in Zhuhai, China. The factory is configured with high-speed production lines for LED drivers and high-density power supplies, as well as state of the art burn-in chambers and automated test equipment. Strategic manufacturing partners provide significant upside capabilities. ERP products go through 100% burn-in to eliminate infant mortality failures. ISO 9001:2008 certified, with regular audits by safety agencies. ERP Quality Quality Management Systems (QMS) Standard Certifications DQA Design Qualification Assurance Reliability testing 4-stage development process Component qualification (Derating, MTBF, Thermal testing) Production auditing ERP products are designed and manufactured to comply with worldwide international IEC standards for lighting applications, and carry certifications by safety agencies such as UL, CSA and Nemko. ERP products also comply with EMC regulations from Europe, and FCC/ICES in North America. QMS Product Qualification Assurance Failure analysis Customer returns SQA IQC PQA Supplier Quality Assurance / Incoming Quality Control Supplier management Material control 4
5 Best-In-Class About Phase-cut dimmers represent the bulk of the dimmers on the market. They employ a technique which works by cutting off or chopping part of the AC line voltage to vary the RMS voltage supplied to the dimmer load. There are two types of phase-cut dimmers: forward-phase (TRIAC or leading-edge) and reverse-phase (ELV or trailing-edge). Forward (TRIAC) Phase Control Reverse (ELV) Phase Control Another popular dimming method is the 0-10V control. Basically, a 0-10V control applies a voltage between 0 and 10 volts DC to produce a varying intensity level, delivering 1% to 100% of the output current. There are actually two 0-10V standards: a theatrical dimming standard (current source) and a dimming light ballast standard (current sink). Developed in the 1980 s, the 0-10V sinking current control method was adopted by the International Electrotechnical Commission (IEC) as apart of its IEC Standard Annex E. ERP LED drivers operate only with 0-10V dimmers that sink current. Light (% of max output) 120% 100% 80% 60% 40% 20% 0% V Signal Tri-Mode The ESS, ESP, ESM, EVM, EVB and SLM series of LED drivers are compatible with Tri-Mode from 6W up to 160 W, i.e. they are compatible with forward-phase (TRIAC or leading-edge), reversephase (ELV or trailing-edge) and 0-10 V dimmers. ERP LED Driver w/ Tri-Mode NT C Broad Compatibility ERP LED drivers deliver an extensive dimmer compatibility. For each LED driver, a dimming compatibility matrix is available upon request, showing how the LED driver scores against a long list of dimmers according to several criteria such as: flicker, shimmer, smooth dimming, no flash at startup, etc
6 LED Cross-Reference ERP has developed an extensive cross-reference for 12 different LED manufacturers. This cross-reference can be directly accessed from the ERP website at On the homepage, using the pull-down menus, select the LED manufacturer and then the LED. You may also select your desired drive current. The cross-reference tool will return a list of driver(s) that are the most relevant for your LED selection. You can also access the crossreference by clicking on LED GUIDE at the top of the homepage. The LED guide lists the 12 LED manufacturers whose LEDs have been cross referenced to some of our LED drivers. 6
7 ERP LED Driver Portfolio Below is a graph that illustrates our portfolio of constant current LED drivers. The color coded drivers >8% efficiency are represented in this brochure and include page number references, while the drivers in the grey are <8% and are not part of this brochure. (%) 93% 90% Use ESS for new designs ERP W (0-10 V, % ) ERM - page W (0-10 V, % ) SLM - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) PDB/CDB260 - page 23 & W (Programmable, 0-10 V dimming only) ESPV - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) TLM - page W (Forward, Reverse Phase & 0-10 V, % ) ESSV - page (Forward, Reverse Phase & 0-10 V, 1-100% ) Use ESPT for new designs ESP & ESPT - page 13 & W (Forward, Reverse Phase & 0-10 V, EVM - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) ESS & ESST - page 11 & W (Forward, Reverse Phase & 0-10 V, 1-100% ) EVB - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) UCP - page W (Forward & Reverse Phase 1-100% ) ESM - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) 8% EBR - page W (Forward & Reverse Phase 1-100% ) EXP - page W (with Wireless Avi-on Bluetooth Mesh) ELM 12-0 W (Forward, Reverse Phase & 0-10 V, % ) Use ESM for new designs 80% Use EBR for new designs ELR 6-18 W (Forward & Reverse Phase % ) Use EBR for new designs ELP 6-18 W (Forward & Reverse Phase % ) Types: Phase-Cut Forward-Phase = Leading-Edge, aka TRIAC Reverse-Phase = Trailing-Edge, aka ELV 0-10V (W) 7
8 EBR SERIES 6W - 21W LED Drivers with Deep TRIAC and ELV (1%-100%) and with Fast 120 Vac, 220/230/240 Vac Max. 21 W 16 to 42 Vdc Current 200 to 700 ma up to 87% 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase 10 ms EBR Diameter: 2.28 (8mm) Height: 1.2 (31.7mm) Max. (W) (Vdc) min. max. 120 VAC NOMINAL VOLTAGE EBR010U: 8-10 W EBR010U EBR010U EBR010U EBR01U: 11-1 W EBR01U EBR01U EBR01U EBR020U: W EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U VAC NOMINAL INPUT VOLTAGE EBR010E: 8-10 W EBR010E /230/ EBR010E /230/ EBR01E: 11-1 W EBR01E /230/ EBR01E /230/ EBR020E: W EBR020E /230/ representative or send an to: SaveEnergy@ERP-.com Compatible with industry standard TRIAC (forward-phase or leading-edge), and ELV (reverse-phase or trailing-edge) phase-cut dimmers Lifetime: 0,000 hours at 70C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Recessed lighting (downlights) Commercial & Residential lighting Architectural lighting Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B at 120 Vac and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Desig Light Consortium ) technical requirements IP20-rated case with silicone-based potting 94V-0 flammability rating (VA available upon request) 90 C maximum case temperature Class 2 power supply 8
9 ERM SERIES 49W - 70W High Density LED Drivers with 0-10 V Max. Current THD Factor Method 120 & 277 Vac 70 W 21 to 82 Vdc 700 ma to 2.1 A up to 90% 90 C (measured at hot spot) < 20% > V % ERM AC Input Temp Sensing Input LED Module NTC Max. (W) (Vdc) min. max. ERM00W: 40 to 0 W ERM00W & ERM00W & ERM00W & ERM060W: 1 to 70 W ERM060W [1] 120 & ERM060W & ERM060W & ERM060W & ERM060W & Not Class 2 representative or send an to: SaveEnergy@ERP-.com 3.21 (81.mm) 2.21 (6.2mm) 1.24 (31.mm) High Bay Lights Troffers Outdoor LED Lighting Office LED Lighting Industrial LED Lighting High current COB LEDs Very High power density in the market: 8.2 W/in 3 Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: FCC CFR Title 47 Part 1 compliant with Class B at 120 Vac and Class A at 277 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting Lifetime: 0,000 hours at 70C case temperature 90 C maximum case temperature Class 2 power supply 9
10 ESM SERIES 21W - 60W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with Fast Max. 120 to 277 Vac 60 W 8 to 43 Vdc Current 280 to 170 ma up to 87% 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase, & 300 ms 4.19 (106.mm) ESM Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Lifetime: 0,000 hours at 70C case temperature NT C 2.37 (60.3mm) 0.99 (2.2mm) Max. (W) (Vdc) min. max. ESM020W: up to 20 W ESM020W ESM020W ESM020W ESM020W SS-F1B [1] ESM020W SS-F1B [2] ESM020W ESM020W ESM030W: 21 to 30 W ESM030W ESM030W ESM030W ESM030W ESM030W ESM030W SS-F1B [3] ESM030W ESM040W: 31 to 40 W ESM040W ESM040W ESM040W ESM040W ESM040W SS-F1B [4] ESM040W ESM00W: 41-0 W ESM00W ESM00W ESM00W ESM060W: 1-60 W ESM060W The ESM020W SS-F1B is specifically intended to drive the Cree LMH2 80 sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 2. The ESM020W SS-F1B is specifically intended to drive the Cree LMH2 120 sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 3. The ESM030W SS-F1B is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 4. The ESM040W SS-F1B is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. representative or send an to: SaveEnergy@ERP-.com Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP20-rated Bottom Leads with Studs metal case with silicone-based potting 90 C maximum case temperature Class 2 power supply Recessed downlights Commercial lighting Residential lighting Architectural lighting 10
11 ESS SERIES 6W - 40W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with Fast 120 to 277 Vac, 220 to 240 Vac 90 C (measured at the hot spot) THD Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESSxxxW: TRIAC and ELV dimming only at 120 Vac. ESSxxxE: TRIAC and ELV dimming only at 230 Vac. Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Lifetime: 0,000 hours at 70C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting 90 C maximum case temperature Class 2 power supply Max. 40 W 6 to 6 Vdc Factor < 20% > (84mm) ESSxxxW/E 1.7 (40mm) Method Forward-Phase, Reverse-Phase, & ESS 0.99 (2.2mm) Current 200 to 2100 ma N T 3.30 (84mm) ESSTxxxW/E up to 87% Startup Time 300 ms 1.7 (40mm) 1.07 (27mm) Max. (W) (Vdc) min. max VAC NOMINAL VOLTAGE ESS010W: up to 10 W ESS010W to ESS010W to ESS010W to ESS010W to ESS010W to ESS01W: 11 to 1 W ESS01W to ESS01W to ESS01W to ESS01W to ESS01W to ESS01W to ESS01W to ESS01W to ESS020W: 16 to 20 W ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS030W: 21 to 30 W ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W to ESS040W: 31 to 40 W ESST040W to ESST040W to ESST040W to ESST040W to VAC NOMINAL INPUT VOLTAGE ESS010E: 11 to 10 W ESS010E /230/ ESS01E: 11 to 1 W ESS01E /230/ ESS01E /230/ ESS020E: 16 to 20 W ESS020E /230/ ESS020E /230/ ESS030E: 21 to 30 W ESS030E /230/ ESS030E /230/ ESS030E /230/ ESS040E: 31 to 40 W ESST040E /230/ ESST040E /230/
12 10 Year Warranty - 10 Year Warranty ESSV SERIES 6W - 40W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with 10- Year Lifetime Same features as ESS series but with 10-year lifetime at 70 C case hot spot temperature 90 C maximum case temperature UL Class P IP64-rated case with silicone-based potting with VA flammability rating Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac. Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements Class 2 power supply Max. 120 to 277 Vac 40 W 3.30 (84mm) 14 to 42 Vdc ESSV Current 20 to 2100 ma 1.7 (40mm) N T up to 87% 1.07 (27mm) C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse- Phase & 0-10 V 300 ms Max. (Vdc) (W) min. max. ESSV010W: up to 10 W ESSV010W to ESS01W: 11 to 1 W ESSV01W to ESS020W: 16 to 20 W ESSV030W to ESSV030W to ESSV030W to SS030W: 21 to 30 W ESSV040W to ESSV040W to representative or send an to: SaveEnergy@ERP-.com Commercial lighting Residential lighting Architectural lighting Wide-area downlights ADVANCE ADVANCE INFORMATION INFORMATION 12
13 ESP SERIES 30W - 60W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with Fast Max. 120 to 277 Vac 40 W 21 to 6 Vdc Current 700 to 1400 ma up to 87% 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 300 ms NOT RECOMMENDED FOR NEW DESIGNS. FOR NEW DESIGNS, USE THE ESPT SERIES. Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESPxxxW: TRIAC and ELV dimming only at 120 Vac. ESPxxxE: TRIAC and ELV dimming only at 230 Vac. Lifetime: 0,000 hours at 70C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting 90 C maximum case hot spot temperature Class 2 power supply 3.21 (81.mm) ESP NT C 2.21 (6.2mm) 1.24 (31.mm) Max. (W) (Vdc) min. max VAC NOMINAL VOLTAGE ESP040W: 30 to 40 W ESP040W ESP040W ESP040W ESP040W ESP040W SS-F1 [1] ESP040W ESP00W: 41 to 0 W ESP00W ESP00W ESP00W ESP00W ESP060W: 1 to 60 W ESP060W VAC NOMINAL INPUT VOLTAGE ESP040E: 30 to 40 W ESP040E /230/ ESP040E /230/ ESP040E /230/ ESP00E: 41 to 0 W ESP00E /230/ ESP00E /230/ ESP060E: 41 to 0 W ESP060E /230/ The ESP040W SS-F1 is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. representative or send an to: SaveEnergy@ERP-.com Recessed lighting (down lights) Commercial & Residential lighting Architectural lighting NOT NOT RECOMMENDED RECOMMENDED FOR FOR NEW NEW DESIGNS. DESIGNS. FOR FOR NEW NEW DESIGNS, DESIGNS, USE USE THE THE ESPT ESPT SERIES. SERIES. 13
14 ESPT SERIES 30W - 60W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with Fast Max. 120 to 277 Vac 40 W 21 to 6 Vdc Current 700 to 1400 ma up to 87% 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 300 ms 3.43 (87mm) ESPT 2.36 (60mm) NT C 1.18 (30mm) Max. (W) (Vdc) min. max VAC NOMINAL VOLTAGE ESPT040W: 30 to 40 W ESPT040W ESPT040W Z1 [1] ESPT040W Z1 [1] ESPT00W: 41 to 0 W ESPT00W Z1 [1] ESPT00W Z1 [1] ESPT00W ESPT060W: 1 to 60 W ESPT060W Z1 [1] VAC NOMINAL INPUT VOLTAGE ESPT040E: 30 to 40 W ESPT040E ESPT040E ESPT00E: 41 to 0 W ESPT00E ESPT00E ESPT060E: 41 to 0 W ESPT060E The ESPTxxxW-xxxx-42-Z1 exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESPTxxxW: TRIAC and ELV dimming only at 120 Vac. ESPTxxxE: TRIAC and ELV dimming only at 230 Vac. Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Lifetime: 0,000 hours at 70C case temperature Recessed lighting (down lights) Commercial & Residential lighting Architectural lighting Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting 90 C maximum case temperature Class 2 power supply 14
15 10 Year Warranty - 10 Year Warranty ESPV SERIES 41W - 60W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with 10- Year Lifetime Same features as ESP series but with 10-year lifetime at 70 C case hot spot temperature 90 C maximum case temperature Non-linear 0-10V dimming profile: 10V to 8.1V=100%, 1V to 0.8V=1%, <0.8V dimto-off Dims to off UL Class P IP64-rated case with silicone-based potting with VA flammability rating Compatible with TRIAC (forward-phase or leading-edge), ELV(reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements Class 2 power supply Max. 120 to 277 Vac 0 W 28 to 42 Vdc 3.43 (87mm) ESPV Current 1060 to 1400 ma NT C 2.36 (60mm) up to 87% 1.18 (30mm) C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 300 ms Max. (Vdc) (W) min. max. ESP00W: 41 to 0 W ESPV00W Z1 [1] ESPV00W Z1 [1] The ESPVxxxW-xxxx-42-Z1 exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com Commercial lighting Residential lighting Troffers Architectural lighting Wide-area downlights ADVANCE ADVANCE INFORMATION INFORMATION 1
16 EVM SERIES 60W - 120W Tri-Mode (TRIAC, ELV & 0-10 V) LED Drivers with Deep Max. 120 to 277 Vac 120 W 30 to 84 Vdc Current 1.0 to 3.0 A up to 87% 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 400 ms.67 (144mm) EVM NT C 2.76 (70mm) 1.7 (40mm) Max. (W) (Vdc) min. max. EVM060W: up to 60 W EVM060W C0B EVM060W Z1B [1] EVM080W: 60 to 80 W EVM080W EVM080W Z1B [1] EVM080W EVM090W: 81 to 90 W EVM090W [2] EVM090W N1B [3] EVM090W EVM090W Z1B [1] EVM100W: 91 to 100 W EVM100W [2] EVM100W [2] EVM100W EVM110W: 101 to 110 W EVM110W N1B [2] [4] EVM110W [2] EVM120W: 111 to 120 W EVM120W [2] EVM120W [2] The EVMxxxW-xxxx-42-Z1B exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). 2. Not class The EVM090W N1B is specifically intended to drive the Cree LMH module and exhibits a customized 0-10V dimming transfer function. 4. The EVM110W N1B is specifically intended to drive the Cree LMH module and exhibits a customized 0-10V dimming transfer function. representative or send an to: SaveEnergy@ERP-.com Compatible with TRIAC (forward-phase or leading-edge),elv (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Outdoor surge protection: 3 kv line to line/6 kv line to earth Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac High Bay Lights Industrial LED Lighting Metal Halide replacement Tunnels and street lighting Outdoor LED Lighting Wide-area downlights Suitable for driving high current COB LEDs such as Cree s CXA300/3070/290/390, Bridgelux Vero series and modules such as Cree s LMH2 6000/8000 Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP20-rated Bottom Leads with Studs metal case with silicone-based potting Optional IP64 metal case with side leads Lifetime: 0,000 hours at 70 case temperature 90 C maximum case temperature Class 2 power supply (only some models) 16
17 EVB SERIES 70W - 120W, Single/Dual/Triple Channel LED Drivers with Tri-Mode (TRIAC, ELV and 0-10 V) Max. 120 to 277 Vac 120 W Vdc Current A up to 87% 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase & 400 ms EVB NT C Max. (W) (Vdc) min. max. EVB080W: up to 80 W EVB080W-1800S EVB100W: 91 to 100 W EVB100W-2300S Not Class 2 representative or send an to: SaveEnergy@ERP-.com 8.39 (213mm) 9.46 (240mm) 17 (40mm) 1.38 (3mm) Industrial LED Lighting Troffers Tunnels and Street lighting Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Outdoor surge protection: 3 kv line to line/6 kv line to earth Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Can also be offered with two and three channels Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP66-rated case with silicone-based potting Lifetime: 0,000 hours at 70 case temperature 90 C maximum case temperature Class 2 power supply (some models only) 17
18 UCP SERIES W - 17W Low Profile Under-Cabinet LED Driver Max. Current THD Factor Method 120 Vac 17.3 W 11 to 36 Vdc 120 to 480 ma up to 87% 90 C < 20% > 0.9 TRIAC & ELV 200 ms UCP Max. (W) (Vdc) min. max. UCP0: up to W UCP0U UCP10: > to 10 W UCP10U UCP10U UCP1: >10 to 1 W UCP1U UCP1U UCP20: >1 to 16 W UCP20U representative or send an to: SaveEnergy@ERP-.com 4.3 (11mm) 1.02 (26mm) 0.6 (16.mm) Undercabinet Lighting Low profile of 16. mm Compatible with industry standard TRIAC (forward-phase or leading-edge) and ELV (reverse-phase or trailing-edge) 1% to 100% dimmable output Very short startup time of 200 ms Active power factor correction (PF) > 0.9 and THD < 20% Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: compliant with FCC CFR Title 47 Part 1 Class B Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements 90 C maximum case temperature Lifetime: 0,000 hours at 70 C case temperature 18
19 SLM SERIES 90W - 160W Tri-Mode (TRIAC, ELV & 0-10 V) High LED Drivers with 1-100% Max. 120 to 277 Vac 160 W 28 to 130 Vdc Current 1 A to 4.4 A up to 90% 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase & 0. sec SLM 4.00 (101.6mm) +12 V / 100 ma Return 12V 2.00 (0.8mm) 1.2 (38.mm) Max. (W) (Vdc) min. max. SLM90W: up to 90 W SLM90W TC [1] SLM100W: 91 to 100 W SLM100W TA [2] SLM120W: 111 to 120 W SLM120W TA [2] SLM120W XA [3] SLM10W: 141 to 10 W SLM140W ZA [4] SLM160W: 11 to 160 W SLM160W ZA [4] SLM160W ZA [4] SLM160W XA [3] SLM160W ZA [4] SLM160W ZA [4] T: Tri-mode dimming (1-100%), C: 1kV /2kV surge protection & IP64 2. T: Tri-mode dimming (1-100%), A: 4kV/6kV surge protection & IP66 3. X: No dimming, A: 4kV/6kV surge protection & IP66 4. Z: 0-10V dimming only (1-100%), A: 4kV/6kV surge protection & IP66 representative or send an to: SaveEnergy@ERP-.com Street and Area lighting Horticulture High bay lights Low bay lights Compatible with TRIAC ( forward-phase or leading-edge), ELV (reverse-phase or trailing-edge), and 0-10 V dimmers +12 V/100 ma auxiliary output to power external fan, motion or ambient light sensor, or wireless module Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A (120 Vac and 277 Vac) Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP66-rated case with silicone-based potting 90 C maximum case hot spot temperature Lifetime: 0,000 hours at 70 C case temperature 19
20 EXP SERIES 30W Tri-Mode (0-10 V & TRIAC/ELV) LED Drivers with Auxiliary +12V Input Auxiliary output of +12 V with 20 ma max output current to drive external fan, motion or light sensor, etc profile: 10V - 9.1V = 100%, 1V to 0.8V = 1%, <0.8V =dim to off Dims to off TRIAC and ELV dimming only at 120 Vac Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Complies with ENERGY STAR luminaire specification and DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting 90 C maximum case hot spot temperature Class 2 power supply Max. 120 to 277 Vac 30 W 30 to 42 Vdc EXP 3.43 (87mm) Current 700 ma +12 V / 20 ma Return 12V 2.36 (60mm) Auxiliary +12 V / 20 ma max 1.07 (27.2mm) up to 82% 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 300 ms Max. (Vdc) (W) min. max. EXPN030W: 21 to 30 W EXPN030W Z1 [1] EXPN00W Z1 [1] The ESPNxxxW-xxxx-42-Z1 exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com Recessed lighting (downlights) Commercial & Residential lighting Architectural lighting ADVANCE ADVANCE INFORMATION INFORMATION 20
21 EXPN030W AVI 30W Wireless Avi-on Bluetooth Smart Mesh Integrated Driver AC IN Input +12 V / 20 ma Return 12V EXP-AVI Max. 120 to 277 Vac 30 W 30 to 42 Vdc 3.43 (87mm) Avi-on Module Current 700 ma Avi-on App 2.36 (60mm) up to 82% Avi-on Battery-ed Movable (s) 1.07 (27.2mm) EXP030W AVI incorporates a fully compliant Bluetooth Smart Mesh module from Avi-on labs ( Complies with ENERGY STAR luminaire specification and DLC (DesignLight Consortium ) technical requirements Dims to off 90 C maximum case temperature Class 2 power supply 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Bluetooth 300 ms Max. (Vdc) (W) min. max. EXPN030W: 21 to 30 W with Bluetooth Mesh Module from Avi-on Labs EXPN030W AVI EXPN00W AVI representative or send an to: SaveEnergy@ERP-.com Avi-on Bluetooth Mesh Solution Wireless lighting controls with simple set-up that anyone can use Pre-integrated Bluetooth Smart + CSRmesh module enables brands to create multi-way controls and switching without additional wiring; no central gateway required Utility grade, secure, reliable mobile app & software, grouping, many users, schedules, timers Virtually unlimited range with mesh Download for free, additional services available Compatible with large ecosystem of products from major brands Avi-on battery-powered movable dimming switches available to complete the turnkey solution Recessed lighting (downlights Commercial & Residential lighting Architectural lighting ADVANCE ADVANCE INFORMATION INFORMATION 21
22 xdrive 40W 60W 100W 100W Constant LED Driver with Integrated for Single Gang Box Mount Input Max. Current Min Current Max Max. Ambient THD Factor 120 Vac 100 W 12, 24 V Constant A up to 92% 40 C < 20% > ms Pout Max (W) Vout Nom (V) Max (A) Vout Regulation (V) VSW40U-12ERP (+/- 4%) VSW60U-12ERP (+/- 4%) VSW60U-24ERP (+/- 4%) VSW100U-24ERP (+/- 4%) representative or send an to: SaveEnergy@ERP-.com Vout Ripple (p-p) < 1% < 1% < 1% < 1% Track lights, downlights For tape/strip lights, under-cabinet lights, please contact Diode LED at W max in a single gang box Constant voltage option: 12 & 24 V, Maximum output current: 4.2 A is provided via a sliding button On/Off button Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B at 120 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements 90 C maximum case hot spot temperature Class 2 power supply 22
23 PDB260 SERIES 10W - 260W Programmable IP66 LED Driver with 0-10V and 1-100% Max. Current THD Factor Method 120 to 277 Vac 260 W 114 to 400 Vdc 32 to 1700 ma up to 93% 90 C (measured at the hot spot) < 20% > sec PDB 1 Vout 1 (Vdc) Max. (W) 2 Vout 2 (Vdc) PDB260: 11 to 160 W PDB PDB PDB representative or send an to: SaveEnergy@ERP-.com Programming 8.4/9.47 ( 217/240. mm ) 2.00 (0.8mm) 1.2 (38.mm) Dual output voltage range selection (only for dual range models) Serial port programming Current: 100% to 0% in each voltage range Maximum output voltage Data log read: SKU, S/N, lot code, hours of operation, FW rev., fault events: power failure, transients (short or surge), thermal events Options Ripple 120 Hz and 120 Hz (IEEE1789) Auxiliary output: up to 24 V / down to 3.3 V / up to 00 ma Alternate 0-10V dimming profiles: Linear, Logarithmic, Ballast type Mark7 (IEC60929, ANSI C82.11) Energy metering (as part of future software upgrade) Street lighting Industrial LED Lighting Outdoor Lighting Wide-area Lighting Tunnels lighting Non-linear 0-10V dimming profile with dim-to-off (10V to 9.1V=100%, 1.V to 0.6V=1%, <0.6V=dim-to-off) Auxiliary output 12 V/100 ma IP66-rated case with silicone-based potting Surge protection: Combination wave IEC : 4 kv line to line/4 kv line to earth 2. kv ring wave: ANSI/IEEE c & c category A Ripple: 2% Protections: open load, over-current and short-circuit (hiccup), over-power, over-temperature with foldback and auto-recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac and EN01 (CISPR 1) at 220/230/240 Vac Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case temperature 23
24 CDB260 SERIES 10W - 260W Programmable IP66 LED Driver with 0-10V & Communication Max. Current THD Factor Method 120 to 277 Vac 260 W 114 to 400 Vdc 32 to 1700 ma up to 93% 90 C (measured at the hot spot) < 20% > sec CDB 1 Vout 1 (Vdc) Max. (W) 2 Vout 2 (Vdc) CDB260: 11 to 160 W CDB CDB CDB representative or send an to: SaveEnergy@ERP-.com Programming Dual output voltage range selection (only for dual range models) 8.4/9.47 ( 217/240. mm ) 2.00 (0.8mm) 1.2 (38.mm) Serial port programming Current: 100% to 0% in each voltage range Maximum output voltage Data log read: SKU, S/N, lot code, hours of operation, FW rev., fault events: power failure, transients (short or surge), thermal events Communication Bi-directional (dimming and and data log read) Available communication protocols: First: Bluetooth Mesh with & w/o external antenna Next: DALI, ZigBee (with & w/o external antenna), DMX Other IEEE protocols available upon request Options Ripple 120 Hz and 120 Hz (IEEE1789) Auxiliary output: up to 24 V / down to 3.3 V / up to 00 ma Alternate 0-10V dimming profiles: Linear, Logarithmic, Ballast type Mark7 (IEC60929, ANSI C82.11) Energy metering (as part of future software upgrade) Non-linear 0-10V dimming profile with dim-to-off (10V to 9.1V=100%, 1.V to 0.6V=1%, <0.6V=dim-to-off) Auxiliary output 12 V/100 ma IP66-rated case with silicone-based potting Surge protection: Combination wave IEC : 4 kv line to line/4 kv line to earth 2. kv ring wave: ANSI/IEEE c & c category A Street lighting Industrial LED Lighting Outdoor Lighting Wide-area Lighting Tunnels lighting Ripple: 2% Protections: open load, over-current and short-circuit (hiccup), over-power, over-temperature with foldback and auto-recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac and EN01 (CISPR 1) at 220/230/240 Vac Lifetime: 0,000 hours at 70C case temperature 90 C maximum case temperature 24
25 TLM SERIES 90W - 160W Tri-Mode (TRIAC, ELV & 0-10 V) High LED Drivers with % 120 to 277 Vac, 220 to 240 Vac Max. 160 W 68 to 8 Vdc Current 1.8 A Constant Current up to 90% 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase & sec TLM Max. (W) (Vdc) min. max. TLM160W: 11 to 160 W TLM160W TLM160E: 11 to 160 W TLM160E representative or send an to: SaveEnergy@ERP-.com +12 V / 100 ma Return 12V 4.00 (101.6mm) 2.00 (0.8mm) 1.2 (38.mm) Stage lighting Studio Lighting Diming range: 0.01% 100% with ETC, Leprecon and Elation stage lighting AC phase dimmers +12 V/100 ma auxiliary output to power external fan SLMxxxW: TRIAC and ELV dimming only at 120 Vac SLMxxxE: TRIAC and ELV dimming only at 230 Vac Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and DLC (Design Light Consortium ) technical requirements IP66-rated case with silicone-based potting 90 C maximum case hot spot temperature 2
26 U.S.A. Headquarters Tel: Patriot Drive, Suite E Moorpark, CA U.S.A. CHINA Operations Tel: No. 8 Pingdong Road 2 Zhuhai, Guangdong, China Artimar Ltda Tel: erp@artimar.com.br R.Bela Cintra 746-3rd floor Sao Paulo- SP Brazil
Dimmable LED Drivers SMALL SMART CONNECTED
Dimmable LED Drivers SMALL SMART CONNECTED Revision: October 2017 Our Target Markets Indoor Residential and Commercial lighting Outdoor street and area lighting Office lighting Warehouses, manufacturing
More informationDimmable LED Drivers SMALL SMART CONNECTED
Dimmable LED Drivers SMALL SMART CONNECTED Revision: June 2018 Our Target Markets Indoor Residential and Commercial lighting Outdoor street and area lighting Office lighting Warehouses, manufacturing facilities,
More informationMax Load. Max. Load. 100W 3-50VDC mA > 90% < 20% > 0.95 RFID P/N: XXXXXXXXXX CERTIFIED TO CSA STD. C22.2 NO.
WIDTH DRIVEN HEIGHT MAGNITUDE LIGHTING AFLEX LINEAR DIMMABLE E465183 DIM DOWN TO 0.1% CLASS P CLASS 2 QUICK SPECS The AFlex Series of Constant Current Programmable LED Drivers offers high efficiency, smooth
More informationHow to Implement xdrive Designs
How to Implement xdrive Designs The xdrive is a unique all-in-one LED driver and dimmer combination designed to fit into a standard recessed electrical box for use with constant-voltage dimmable lighting
More informationLED Driver Selection Guide
LED Driver Selection Guide Fulham is the preferred partner of over 3000 lighting manufacturers and distributors worldwide. As a pioneer in the electronic lighting industry, we have the product breadth
More informationLED Driver Selection Guide
LED Driver Selection Guide Fulham is the preferred partner of over 3000 lighting manufacturers and distributors worldwide. As a pioneer in the electronic lighting industry, we have the product breadth
More informationSTRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
More informationLinear Line Voltage LED Engine
Linear Line Voltage LED Engine Product Specification Introduction The TERRALUX Linear LED Engine is a fully integrated, self-contained, plug-and-play LED solution for lighting fixture manufacturers and
More informationLinear Line Voltage LED Engine
Linear Line Voltage LED Engine Product Specification Introduction The TERRALUX Linear LED Engine is a fully integrated, self-contained, plug-and-play LED solution for lighting fixture manufacturers and
More informationVENTO LED Drivers. VENTO LED Driver. Features. LED Module. Active LED Cooler
Features VENTO LED Drivers are high efficiency off-line LED drivers that include an auxiliary 5V output for powering active cooling devices. The features, size and performance of these products make them
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationLED Driver + Dimmer 5YEAR. 40W, 60W or 100W Constant Voltage LED Driver with Integrated Dimmer for Single Gang Box Mount FEATURES & BENEFITS
40W, 60W or 100W Constant Voltage LED Driver with Integrated Dimmer for Single Gang Box Mount Typical Application Diagram L (BLK) 120 VAC ~ 60Hz Driver + Dimmer V+ (Red) V- (Blue) LED Array/Fixture N (WHT)
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More informationSTRATO LED Drivers Metal Enclosure 35W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationEnergy Solutions LED Accelerator Program
Energy Solutions LED Accelerator Program Product Qualification Statement I hereby certify that the LED lighting product (Product) listed below meets all applicable general and specific criteria for qualification
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationLED Driver Driver Universal voltage ( V) Highest flexibility
Driver Universal voltage (120 277 V) Highest flexibility Universal voltage Highest flexibility Positioning in the Tridonic portfolio ADVANCED Simplicity itself EXCITE Flexible Overview of casing types
More informationMax. Input Power (W) Input Current V Isolated DALI
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (A pk /5%- µs) THD @ Max Load (%) Power Factor @ Max Load
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationTRMUNV065EC8XXA TRAUNV065EC8XXA Universal Voltage LED Canopy Retrofit Kit
Universal Voltage LED Canopy Retrofit Kit General Specifications Input Voltage Input Current Input Power Input PF THD Max Lumen Output @ Full Power Dimming Type/Range Beam Angle CRI Storage Temperature
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationMax. Case Temperature 90 C (measured at the hot spot) THD
Input Voltage 120 to 277 Vac typical Max. Output Power 160 W Output Voltage 21 to 85 Vdc Output Current 1.8 A to 3.9 A CC Efficiency 90% typical CC: Constant Current Max. Case Temperature 90 C (measured
More informationIndoor Linear 50W Driver SI-CU WW
Product Data Sheet Rev.2.0 2016. 5. 27 1# LED Driver Indoor Linear 50W Driver SI-CU1425001WW Constant Current LED Driver Features & Benefits Output Current Range: 500~1400 ma (adjustable via R-set) Output
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationInput Current at 240V (A) Max. Input Power (W) Dimming Method 1-10V Isolated. Enclosure
Power (W) Voltage (V) (A) Efficiency @ Max Load Tcase max Input at 240V (A) Max. Input Power (W) Inrush (Apk/50%- µs) Max. THD (%) Power Factor @ Max Load Surge Protection Common/Di ff (KV) Weight (Lbs)
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationOutput Voltage Range. Parameter Min. Typ. Max. Notes. Input Voltage 90 Vac Vac 127~300 Vdc
EUP096SxxxST Features High Efficiency (Up to 93.0%) Full Power at Wide Output Current (Constant Power) Adjustable Output Current (AOC) with Dipswitch Nondimming Control Input Surge Protection: 6kV lineline,
More informationLighting The Way. Ballast Specification Guide
Lighting The Way To Energy Savings Ballast Specification Guide Ballast Specification Guide Welcome to the American Ballast family of products and services In six short years, American Ballast has built
More informationTHE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Fixture Series (surfacemount or hung) for Passageway, Stairwells, General, Direct and Indirect Illumination KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep
More informationOPTOTRONIC LED Power Supply OTi 30W Emergency Driver Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 30W Emergency Driver Technical Specifications Electrical Specifications Input General Information Item Number 57403 & 57404 Type Constant Current,
More informationS HINE V ENTURE L IGHTING S LED LAMPS. Quality retrofit LED lighting products from a leader in the lighting industry. Full range dimming
S HINE V ENTURE L IGHTING S LED LAMPS Quality retrofit LED lighting products from a leader in the lighting industry Full range dimming Longer life and up to 90% energy savings Long product life and improved
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationInput Current at 240V (A) Max. Input Power (W) Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Tcase Max Input Current at 240V (A) Max. Input Power (W) Inrush Current (Apk/50%- µs) Max. THD (%) Power Factor @ Max Load Surge
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationMax. Input Power (W) Input Current. Inrush 347V Vin 60/ C. 480V Vac Vin 85 / 115. Dimming Method.
Power (W) Voltage (V) Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load Surge Protection Common/Diff
More informationModels. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
More informationOPTOTRONIC LED Power Supply OTi 50W Emergency Driver - Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 50W Emergency Driver - Technical Specifications GENERAL INFORMATION Item Number 57405 & 57406 ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC)
More informationIndustrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
More informationLED Driver Linear / area dimming
Driver LC W 0 1050mA 50V IOTr lp PRE UNV PREMIUM series SELV (US applications) Product description Constant current LED Driver Dimming range 1 100 % Adjustable output current between 0 and 1,050 ma via
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationDALI 650mA LED Driver
Installation Guide DGLC650C18DD PATENT PENDING REGISTERED DESIGN Designed in Australia to meet Australian Standards and installation conditions DIGINET.NET.AU Diginet Control Systems Pty Ltd ABN 89 095
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationJBE LED2000 INDUSTRIAL SOLUTIONS FOR LED & INCANDESCENT MAINS LIGHTING FLICKER FREE TRAILING EDGE DIMMER
JBE LED2000 INDUSTRIAL SOLUTIONS FOR LED & INCANDESCENT MAINS LIGHTING FLICKER FREE TRAILING EDGE DIMMER JBE LED Dimming Controller for 110V* & 220V/ 240V AC LED Systems Thank you for purchasing high quality
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationLED DRIVERS & POWER SUPPLIES EFORE.COM
LED DRIVERS & POWER SUPPLIES EFORE.COM OUR BRANDS BRIEFLY ABOUT EFORE Efore Group is an international company which designs and manufactures custom and standard DC power systems and AC/DC power supplies
More informationLDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems.
LDX-U20 is a microprocessor controlled DC-UPS rated 20 A usable in 12 V or 24 V systems. LDX-U20 monitors the voltage supplied by a DC source and in case of power failure a backup battery is connected
More informationConstant Voltage TRIAC Dimmable Driver---120W Series. Features
Features Specification Output constant voltage Universal AC input: 90-130VAC.Power Factor:up to 0.95 High Efficiency: up to 84% Protections: short circuit / over loading / over current Full protection
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationPart Number: BK - Black WT - White CS - Custom*
Product Description With a high performance heat sink, exceptional lumen maintenance, and a rock solid housing, the Exite Pro will last for many years to come. With lumen packages ranging in comparison
More informationTJT120034ACxxxB TJT120034ACxxxC 120V LED DirectAC Engine and Retrofit Kits
0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses
More informationTJT120015ACxxxB TJT120015ACxxxC 120V LED DirectAC Engine and Retrofit Kits
0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses
More informationLED COMPONENTS SEPT
LED COMPONENTS SEPT 2018 1 Seeing is believing. Free samples are always available. Ordering a sample is easy: Phone: 800-464-2680 Email: samples@keystonetech.com Web: keystonetech.com/samples 2 TABLE OF
More informationEATON 9315 UPS 200 TO 300 KVA Specifications
EATON 9315 UPS 200 TO 300 KVA Specifications Input Voltage Range See table below Frequency Range (60Hz) 57-64 Hz (50Hz) 47-53 Hz Surge Protection Meets ANSI C62.41, Category A & B EN 50091-2 and EN50082-2
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationRP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationCree LED Components. Presenter : Stephan Schneider Date
Cree LED Components Presenter : Stephan Schneider Date 07.12.2012 Cree s mission is to lead the LED lighting revolution to obsolete inefficient lighting Cree will do whatever it takes to accelerate the
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationPrimaLine 3 XT 24V Wet Location LED Tape Light
PrimaLine 3 XT 24V Wet Location LED Tape Light 0.55 in. wide Field cuttable every 2 in. PrimaLine 3 XT wet location tape is a high output, dimmable LED light that supplies the perfect level of brightness
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationMax. Input Power (W) Input Current. Inrush. 277 Vin 7.4 / 600. Dimming Method. 1-10V Isolated. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationPower+ CLASSIC. 20/30 kva, 3x208 Vac
Power+ CLASSIC 20/30 kva, 3x208 Vac with internal batteries Power+ CLASSIC 20/30 kva, 3x208 Vac Power+ is a family of modular, parallel, redundant UPS systems from Gamatronic one of the leading companies
More informationSorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V
Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design
More information62.6g / 0.13lbs. RoHS Compliant Dry and Damp Location IC Over Temperature Control
DirectAC UNV Retrofit Kit Engines Integrated AC Direct Drive (No DC Driver) culus Classified 1598C Universal Voltage (120~277) AC Engine culus Recognized 8750 Suitable for open or fully enclosed luminaires
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationSorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationC B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL Customer: Product Material No.: Model No. LF-GMD045YS Version : V1.4 Manufacturer: Sichuan Ledfriend Technology Co., Ltd Customer Approval Tested by Checked by Approved by Ledfriend
More informationLED Auxiliary Devices
LED Auxiliary Devices 30 YEARS OF EXCELLENCE 1985-2015 Incorporated in the state of California in 1985, McWong International, Inc. has grown to become a strategic supplier of high-quality lighting control
More information15W (+/- 1W) 5.08" diameter x 0.75 H. Energy Star Luminaire CSD
DirectAC UNV Retrofit Kit Engines Integrated AC Direct Drive (No DC Driver) Universal Voltage (20~277) AC Engine Suitable for open or fully enclosed luminaires Suitable for luminaires with plastic and
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationDRIVER OUTPUT F Fixed DM 0-10v Dimming 1 COLOR TEMP 51K 5100
Product Information Project Name Catalog Number QCF Type Date SPECIFICATIONS Features Upgrade to modern architectural aesthetics providing controlled uniform light distribution. Improves facial recognition
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL Customer: Product Material No.: Model No. LF-GMD065YB Version : V1.0 Manufacturer: Sichuan Ledfriend Technology Co., Ltd Customer Approval Tested by Checked by Approved by Ledfriend
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationOpen Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
More informationSwitching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
More informationSkyRibbon Essential White Linear Direct Powercore Recessed linear interior LED fixture for direct-view and general illumination applications with
SkyRibbon Essential White Linear Direct Powercore Recessed linear interior LED fixture for direct-view and general illumination applications with solid white light SkyRibbon Essential White Linear Direct
More informationMax. Output Power. Efficiency (1) 110Vac 220Vac. 450 ma 90 ~ 305 Vac 445 Vdc 200 W 92% EUC-200S045ST
LED Driver EUC200SxxxST 20110114 D Features Ultra High Efficiency (Up to ) Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllRound Protection: SCP, OTP, OVP
More informationDead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability
Dead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
More informationTJT120023ACxxxB TJT120023ACxxxC
0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses
More informationPOWER-WIN TECHNOLOGY CORP.
atts Dual to Quad Output FEATURES Build-in active PFC function, PF > 0.9 Compact design for multiple outputs Dual to Quad output, Flexible DC output combination from 3.3V to 48V 2 year warranty ELECTRICAL
More informationEfficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationPackage (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 91% No minimum load required UL695-1, EN5155 & IEC/EN695-1
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More informationQCF IP65. LED Gas Canopy Fixture SPECIFICATIONS CERTIFICATION ORDERING INFORMATION EXAMPLE QCF-UL-60C-F-51K-GCO CERTIFIED
Product Information Project Name Catalog Number QCF Type Date SPECIFICATIONS Features Upgrade to modern architectural aesthetics providing controlled uniform light distribution. Improves facial recognition
More informationOPTOTRONIC Programmable LED Emergency Driver and Battery Pack
www.osram.us/optotronic OPTOTRONIC Programmable LED Emergency Driver and Battery Pack Dual mode programmable driver that supports normal and emergency mode The OSRAM OPTOTRONIC Emergency Driver family
More information