Max. Input Power (W) Input Current V Isolated DALI
|
|
- Helena Ball
- 5 years ago
- Views:
Transcription
1 Output Power (W) Output Voltage (V) Output Current (A) Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (A pk /5%- µs) Max Load (%) Power Max Load Surge Protection Common/Diff (KV) Weight (Lbs/kgs) IP Rating 75 8 ~ > 92% 8 C /14 2 >.95 3/3 2.8/ 1.27 IP66 Wire Diagram Dimming Method Dimming Range Minimum Output Current (A) Min (typ). Output Power(W) Other Comments 1-1V Isolated DALI 1% ~ 1% ~ 255 1% ~ 1%.5 3 Dimming source current: 15 µa Linear or Logarithmic variation Enclosure Input and output use lead- wires. Lead-wires are 18AWG 15C/6V solid copper. Standard Lead Length is 5mm+/-1mm on all wires outside the can in. (mm) Case Length 8.38 (211.1) Case Width 2.35 (59.1) Case Height 1.47 (37.1) Mounting Length 9. (226.2) Mounting Width 1.7 (42.9) Overall Length 9.54 (24.5)
2 Product Data Order code M Full product code M Full product name Xitanium75W.35-.7A Prog GL sxt Net weight per piece 1.27 KG / 2.8 lbs Interfaces 1-1V Dimming, DALI, RSET,NTC, PLS,CLO Ambient Temp Range Corresponding Tcase -4C to +55C -15C to +8C Line Voltage V Line 277V Line Frequency 5/6Hz IP Classification 66 TC 7 C 1 hr [nom] refer to graph below TBD TC 8 C 5 hr [nom] refer to graph below TBD Suitable for Outdoor use? Yes Max TC 8C Inrush current Width 13 23V 14 µs height, see graph Maximum ballast number on MCB 16A 11 [max] Input Over-voltage Can survive input over-voltage stress of 32VAC for 48 hours and 35VAC for 2 hours LED Current Tolerance +/-5% Earth leakage current.7 ma [max] Mains voltage safety (AC) +/-1% Mains voltage performance (AC) +/-1% Min. Mains voltage operational 18 V [min] Output peak voltage 35V [max] Output Current ripple 7 ma (ripple = pk-pk/avg) THD total < 2% THD 3 rd Harmonic < 15% Max Load >.95 Wire Isolation All wires are Double isolated to ground Protections Short Circuit and Open Circuit Protection for LED + and LED- Standby power <1.W Installation & Application Notes: Section I Physical Characteristics 1.1 LED Driver shall be installed inside an electrical enclosure 1.2 Wiring inside electrical enclosure shall comply with 6V/15 C rating or higher. Section II Performance 2.1 LED Driver has a rated lifetime of 5, TC <=8C. 2.2 LED Driver tolerates sustained open circuit and short circuit output conditions without damage. 2.3 LED Driver maximum allowable case temperature is 8 C see product label for measurement location. 2.4 LED Driver reduces output power to LEDs if its case temperature exceeds >9 C thermal protection and eventually reduces output current to zero. 2.5 LED Driver complies with the requirements of UL, CSA, CE, ENEC, CISPR 15 Ed 7.2 and CQC (TBD).
3 AOC (Adjustable Output Current) Settings: Nominal Iout (ma) Nominal Iout VS Rset (between Yellow and BLU/WHT wires) Rext (Ohm) Rset (Ohms) Current(mA) Driver Output Voltage (V) Maximum Output Voltage vs. Output Current Driver Output Current (ma)
4 Temperature Profile Settings: Module Thermal protection can be implemented between 55C to 85 C. NTC from Murata Part Number NCP18XH13J3RB has to be used Output Current (%) vs. NTC Temp (@ Vin = 12 V, Tcase = 7 C, NTC_warn = 65 C, NTC_max = 75 C) Iout (%) Estimated Module Temperature (C) Iout (%) vs. Vdim (@ Vin = 12Vac) Iout (%) T = 7C Vdim (V)
5 91 Efficiency vs. Output Voltage Vin = 12 V, Tcase = 7 C) Efficiency (%) Iout = 7 ma Iout = 53 ma Iout = 35 ma Output Voltage (V) Efficiency (%) Efficiency vs. Output Voltage (@ Vin = 2 V, Tcase = 7 C) Output Voltage (V) Iout = 7 ma Iout = 53 ma Iout = 35 ma
6 Efficiency (%) Efficiency vs. Output Voltage (@ Vin = 23 V, Tcase = 7 C) Output Voltage (V) Iout = 7 ma Iout = 53 ma Iout = 35 ma Efficiency (%) Efficiency vs. Output Voltage (@ Vin = 277 V, Tcase = 7 C) Output Voltage (V) Iout = 7 ma Iout = 53 ma Iout = 35 ma
7 1 Power Factor vs. Output Power Tcase = 7 C) Power Factor Vin = 12 V Vin = 2 V Vin = 23 V Vin = 277 V Output Power (W) THD (%) THD vs. Output Power (@ Tcase = 7 C) Output Power (W) Vin = 12V Vin = 2 V Vin = 23V Vin = 277V
8 Programming Interface: Programming Tool: Pls refer to the website.
9 Description Xitanium 75W.35-.7A Prog GL sxt 7 Iout vs. Tcase of Driver: Iout (%) vs. Tcase(Driver) 12 1 Iout (%) Tcase (C) with +/ 5C Tolerancee Inrush Current Info: Vin 12 Vrms 23 Vrms 277 Vrms 35 Vrms Ipeak 58 A 18 A 126 A 142 A T (@ 5% of Ipeak) 14 µs 14 µs 14 µs 14 µs 1275 WEST HIGGINS ROAD ROSEMONT, IL 618
10 Lifetime vs. Tcase of Driver: Life (khours) Lifetime vs. Tcase Tcase (deg. C) Failure Rate Info: 1. <.1% per 1 Tcase 7 C 2. <.2% per 1 Tcase between 7 C and 8 C. Failure Rate per 1kHr Xitanium Drivers : Failure Rate vs. Tcase Tcase (C)
11 Isolation: Isolation Input Output DALI 1V Wires Wires Wires Wires Chassis Input Wires NA Output Wires+ Fortimo Interface Wires 175 NA DALI Wires NA NA 375 1V Wires NA NA 375 Chassis NA COA for M Conditions of acceptability Will be added SOON.
Max. Input Power (W) Input Current. Inrush 347V Vin 60/ C. 480V Vac Vin 85 / 115. Dimming Method.
Power (W) Voltage (V) Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load Surge Protection Common/Diff
More informationInput Current at 240V (A) Max. Input Power (W) Dimming Method 1-10V Isolated. Enclosure
Power (W) Voltage (V) (A) Efficiency @ Max Load Tcase max Input at 240V (A) Max. Input Power (W) Inrush (Apk/50%- µs) Max. THD (%) Power Factor @ Max Load Surge Protection Common/Di ff (KV) Weight (Lbs)
More informationInput Current at 240V (A) Max. Input Power (W) Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Tcase Max Input Current at 240V (A) Max. Input Power (W) Inrush Current (Apk/50%- µs) Max. THD (%) Power Factor @ Max Load Surge
More informationMax. Input Power (W) Input Current v 2 2 0v 2 40v. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationMax. Input Power (W) Input Current. Inrush. 277 Vin 7.4 / 600. Dimming Method. 1-10V Isolated. Enclosure
Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load
More informationLoad Com/Diff(KV) (Kg) Rating * V 240V 277V V 240V 277V V 240V 277V > / 4 0.
Approbations IS 15885 ( art 2 / Sec 13 ) Output Output Output Efficiency Max Case Input Max Input Inrush THD @ ower Surge Weight Envir. ower Voltage Current at Max Load Temp Current ower Current Max Load
More informationMax. Input Power (W) Inrush Current (A pk /µs)
Output Power (W) Output Voltage (V) Output Current (A) Tcase Max 150 60~210 0.70 80 C Wiring Diagram Input Current 1.4A@120VAC 0.6A@277VAC 0.67A@250VDC Max. Input Power (W) Inrush Current (A pk /µs) Max.
More informationMax Load. Max. Load. 100W 3-50VDC mA > 90% < 20% > 0.95 RFID P/N: XXXXXXXXXX CERTIFIED TO CSA STD. C22.2 NO.
WIDTH DRIVEN HEIGHT MAGNITUDE LIGHTING AFLEX LINEAR DIMMABLE E465183 DIM DOWN TO 0.1% CLASS P CLASS 2 QUICK SPECS The AFlex Series of Constant Current Programmable LED Drivers offers high efficiency, smooth
More informationLED Modules. Fortimo DLM ES 0-10V G1 NA 1100lm
LED Modules Fortimo DLM ES 0-10V G1 NA 1100lm The new Philips Fortimo downlight module (DLM) EaseSelect (ES) is an integrated module with a 0-10V 1% dimmable driver inside, enabling speed on design, assembly
More informationTrustSight LED Emergency Lighting
TrustSight Emergency ar 20-95V 3W/6W Datasheet TrustSight LED Emergency Lighting TrustSight ar 20-95V 3W/6W The application of LED technology within the lighting sector also requires integration of reliable
More informationTrustSight LED Emergency Lighting
TrustSight Emergency Point 15-55 V 3 W Datasheet TrustSight LED Emergency Lighting TrustSight Point 15-55 V 3 W The application of LED technology within the lighting sector also requires integration of
More informationLong lifetime and robust protection against moisture, vibration and temperature. Configurable operating windows (AOC)
Xitanium LED driver Datasheet Xitanium FULL Prog LED Xtreme drivers Xitanium FULL Prog LED Xtreme drivers Philips Xitanium Full Prograable LED drivers are specifically designed to deliver the highest performance,
More informationOPTOTRONIC LED Power Supply OTi 30W Emergency Driver Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 30W Emergency Driver Technical Specifications Electrical Specifications Input General Information Item Number 57403 & 57404 Type Constant Current,
More informationLong lifetime and robust protection against moisture, vibration and temperature. Configurable operating windows (AOC)
Xitanium LED driver Datasheet Xitanium FULL Prog LED Xtreme drivers Xitanium FULL Prog LED Xtreme drivers Philips Xitanium Full Prograable LED drivers are specifically designed to deliver the highest performance,
More informationOPTOTRONIC LED Power Supply OTi 50W Emergency Driver - Technical Specifications
www.osram.us/optotronic OPTOTRONIC LED Power Supply OTi 50W Emergency Driver - Technical Specifications GENERAL INFORMATION Item Number 57405 & 57406 ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC)
More information60W Constant Current Mode LED Driver. HBG-60 series. File Name:HBG-60-SPEC
05 SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION OPEN CIRCUIT VOLTAGE(max.) CURRENT ADJ. RANGE CURRENT RIPPLE CURRENT TOLERANCE SET UP TIME VOLTAGE RANGE FREQUENCY
More informationXitanium LED ELECTRONIC DRIVERS
Philips Programmable Ultimate flexibility for LED lighting manufacturers Optimized to meet the ever-evolving needs of today s LED lighting manufacturers, Programmable are a one-stop solution for the varying
More informationLED Driver Linear / area dimming
Driver LC W 0 1050mA 50V IOTr lp PRE UNV PREMIUM series SELV (US applications) Product description Constant current LED Driver Dimming range 1 100 % Adjustable output current between 0 and 1,050 ma via
More informationLPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
More informationLED Driver Linear / area fixed output
Driver LC 65W 4-7mA flexc lp ANCED series Product description Built-in constant current LED Driver Adjustable output current between 4 and 7 ma Max. output power 65 W Up to 94 % efficiency Nominal life-time
More informationPerfectly match each project s needs
Outdoor lighting FastFlex LED module 2x8/740 Gen2 Datasheet Perfectly match each project s needs Benefits Perfectly match each project s needs Flexible system design Easy factory assembly and reliable
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More informationFlexible system approach
FastFlex LED board 2x8/757 DS Gen3 Datasheet Flexible system approach Outstanding performance while enabling OEM optical differentiation in road, urban and industrial lighting applications. Benefits Enables
More informationOutdoor 200 W 2 Channel SL-L2701B0N1KR
Product Data Sheet Rev. 1.0 2017.09.07 1# LED Driver Outdoor 200 W 2 Channel SL-L2701B0N1KR High Efficiency Constant Current LED Driver With Active Power Factor Correction Features & Benefits Output Current:
More informationOutdoor LED comfortable white light
LLM Gen4 3000/730 26 W Datasheet Outdoor LED comfortable white light Benefits Comfortable, glare-free white light Reduced light pollution (no sky glow) Significant energy savings and reduced CO 2 emissions
More informationUL8750 EN EN UL1310 EN61547 EN55015 EN EN EN Last update: 16 June 2016 Page: 1 of 6
Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance, which meets SELV standard of preventing
More informationIS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
More informationLED Modules. Fortimo DLM Flex L2
LED Modules Fortimo DLM Flex L2 24 G1 NA Fortimo LED DLM flex L2 expands solution beyond downlight applications. The Philips Fortimo LED downlight module (DLM) flex L2 brings even more application possibilities
More informationModel Number AC-50CD1.4APNZ AC-50CD1.4APBNZ
ELECTRICAL SPECIFICATIONS: Programmable, Digital, Wide-Range Ajustable Current & Dimming Type TL Rated Constant Current LED Driver Model Number AC-5CD.4APNZ Input Voltage: 2-277V Input Frequency: 5/6Hz
More informationSELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
More informationLED control gear Compact fixed output
Driver LCI 65 W 1400/1750 ma TEC SR TEC series Product description Independent fixed output LED Driver Constant current LED Driver Output current 1,400 or 1,750 ma Max. output power 65 W Nominal life-time
More information60W Single Output LED Power Supply. HBG-60 series. File Name:HBG-60-SPEC
Ⅱ { SPECIFICATION MODEL HBG-60-10 HBG-60-10 HBG-60-2 OUTPUT INPUT RATED CURRENT CURRENT ACCURACY EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE
More informationLED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series
Driver LC 150W 200 1050mA IND sl EXC EXCITE series Product description Constant current built-in Driver for LED, particularly suitable for industrial applications in tough environments such as cold warehouses
More informationLED Driver Linear / area fixed output industry. Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series
Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
More informationProud UK distributor for Self Electronics
Proud UK distributor for Self Electronics Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance,
More informationLED Driver Linear / area fixed output industry. Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series
Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such
More informationLED Modules. Fortimo DLM
LED Modules Fortimo DLM DLM Flex 3000lm New Fortimo LED Downlight Module (DLM) Flex systems now provide you with the latest advances, including high quality LED options to satisfy both functional and performance
More informationDriver LC 17W mA flexc C EXC EXCITE series
LC 17 W 250 700 flexc C EXC - Tridonic Seite 1 von 5 Home Products LED Drivers Compact fixed output EXCITE series LC 17 W 250 700 flexc C EXC Driver LC 17W 250 700 flexc C EXC EXCITE series Product description
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationPC T8 TEC, W PC TEC
T8 TC-L PC T8 TEC, 18 58 W PC TEC Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range (for
More informationIndoor Linear 50W Driver SI-CU WW
Product Data Sheet Rev.2.0 2016. 5. 27 1# LED Driver Indoor Linear 50W Driver SI-CU1425001WW Constant Current LED Driver Features & Benefits Output Current Range: 500~1400 ma (adjustable via R-set) Output
More informationFL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8
T8 TC-L PC T8 TEC, 18 58 W PC TEC T8 Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationJOB NAME MODEL NO. LAMP OUTPUT VOLTAGE
Specification Sheet Components LED Control CPS 10875 JOB NAME MODEL NO. LAMP Determine the maximum fixture wattage per circuit by adding the wattage of each fixture together and choose an LED power supply
More informationInput Power (Watts) (min/max)
IZT-4PSP32-G@120V Input Voltage 120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor
More informationLED Driver Compact fixed output
Driver LC 25W 350 1050mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationLED Driver Compact fixed output
Driver LC 45W 500 1400mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationVKMUNV018RDxxxA. UNV DC Engines Retrofit Kits with 0-10V Dimming Universal Voltage (120~277) DC Engine
UNV DC Engines Retrofit Kits with 0-0V Dimming Universal Voltage (20~277) DC Engine culus Classified 598C Suitable for open or fully enclosed luminaires culus Recognized 8750 Suitable for luminaires with
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationEN UL8750 EN UL1310 EN61547 EN55015 EN EN EN62384 Last update: 16 June 2016 Page: 1 of 6
Constant Current & Constant Voltage LED Power Supply Product description This series was designed for compromise between an attractive price and high performance, which meets SELV standard of preventing
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationLED Modules. Fortimo DLM
LED Modules Fortimo DLM DLM Flex 5000lm New Fortimo LED Downlight Module (DLM) Flex systems now provide you with the latest advances, including high quality LED options to satisfy both functional and performance
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationLINEAR LED DRIVERS. ComfortLine Selectable Current (Output Terminal) ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL)
LINEAR LED DRIVERS ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL) 186443, 186444, 186486, 186487, 186488, 186491, 186492, 186737 Typical Applications Built-in in linear luminaires for Office lighting
More informationFastFlex LED module Gen 2. Flexible system design and brilliant optical control. KiwiLighting.com
FastFlex LED module Gen 2 Flexible system design and brilliant optical control KiwiLighting.com Philips FastFlex LED module offers high-quality, reliable, easy-to-use outdoor LED illumination for roads
More informationExperience bright and vivid colors
Fortimo LED Fortimo LED SLM CW 1205 L13 2024 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM CW 1205 L13 1619 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationRELB2S40N35I (2)F40T12 120V Ele BLST
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 RELB2S40N35I (2)F40T12 120V Ele BLST Philips Advance Catalog Number Manufacturer Description Weight per unit Product Category
More informationInput Power (Watts) (min/max)
IZT-2S32-SC@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor F17T8 2 17 50/10
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationAssociated Rsets. Associated Drivers. XI013C030V048DNM1 0-10V dimming Rset2. XI025C100V045DNM1 0-10V dimming Rset2
LED Modules Fortimo SLM Fortimo LED SLM Gen 4 1100lm L9 The Fortimo LED SLM Gen 4 is a next generation solution for spotlight and downlight applications. It is a product in line with the Fortimo brand
More informationInput Current (Amps) Input Power (ANSI Watts)
ICN-2S28-T@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest F14T5 1 14 0/-18 0.14 17 1.07
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationInput Current (Amps) Input Power (ANSI Watts)
Electrical Specifications HCN4S5490C2LSG@347 Brand Name CENTIUM T5 Ballast Type Electronic Starting Method Programmed Start Lamp Connection Series/Parallel Input Voltage 347 Input Frequency 50/60 HZ Status
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationInput Power (Watts) (min/max)
IZT-128-D@120V Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor F14T5 1 14 50/10
More informationCHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
More informationLED Modules. Fortimo SLM. Fortimo LED SLM Gen lm L13
LED Modules Fortimo SLM Fortimo LED SLM Gen 4 2000lm L13 The Fortimo LED SLM Gen 4 is a next generation solution for spotlight and downlight applications. It is a product in line with the Fortimo brand
More informationProduct Description. Xitanium/Fortimo LED Drivers indoor dimmable
Product Description Xitanium/Fortimo LED Drivers indoor dimmable Xitanium and Fortimo LED drivers are specially designed to operate LED solutions for general lighting applications such as downlighting,
More informationIndustrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
More informationExperience bright and vivid colors
Fortimo LED Fortimo SLM C 930 PC 1205 L13 2024 G7 Datasheet Experience bright and vivid colors Fortimo LED SLM PC 1205 L13 2024 G7 Fortimo LED SLM Gen7 continues to focus on the combination of Quality
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationTRMUNV065EC8XXA TRAUNV065EC8XXA Universal Voltage LED Canopy Retrofit Kit
Universal Voltage LED Canopy Retrofit Kit General Specifications Input Voltage Input Current Input Power Input PF THD Max Lumen Output @ Full Power Dimming Type/Range Beam Angle CRI Storage Temperature
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationExperience bright and vivid colors
Fortimo LED Fortimo LED SLM Food 1211 L19 2828 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM Food 1211 L19 2828 G 6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationInput Current (Amps) Input Power (ANSI Watts)
ICN-2S54-90C-T@120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (ANSI Watts) Ballast MAX THD % Power MAX Lamp Current Crest F54T5/HO 1 54-20/-29 0.53
More informationVENTO LED Drivers. VENTO LED Driver. Features. LED Module. Active LED Cooler
Features VENTO LED Drivers are high efficiency off-line LED drivers that include an auxiliary 5V output for powering active cooling devices. The features, size and performance of these products make them
More informationReliable extreme technology for demanding LED applications
Xitanium LED Drivers Outdoor Reliable extreme technology for demanding LED applications For today, for tomorrow Xitanium LED Xtreme drivers are the ideal solution for LED luminaires A wide range, offering
More informationExperience bright and vivid colors
Fortimo LED Fortimo LED SLM PW 18 L15 24 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM PW 18 L15 24 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of Light and
More informationExperience bright and vivid colors
Fortimo LED Fortimo LED SLM PW 1205 L13 2024 G6 Datasheet Experience bright and vivid colors Fortimo LED SLM PW 1205 L13 2024 G6 Fortimo LED SLM Gen6 continues to focus on the combination of Quality of
More informationHigh-density LED modules that sell
Fortimo LED Fortimo SLM C 930 PC 1204 L09 1619 G7 Datasheet High-density LED modules that sell Fortimo LED SLM PC 1204 L09 1619 G7 For retailers it is essential to create an atmosphere that keeps customers
More informationFortimo LED Line Gen3
LED Line 1 ft 650 lm 3R HV3 Datasheet Fortimo LED Line Gen3 Fortimo LED Line systems are designed to produce pure white light for general lighting applications with high efficiency levels. The Fortimo
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationOutput Voltage Range. Parameter Min. Typ. Max. Notes. Input Voltage 90 Vac Vac 127~300 Vdc
EUP096SxxxST Features High Efficiency (Up to 93.0%) Full Power at Wide Output Current (Constant Power) Adjustable Output Current (AOC) with Dipswitch Nondimming Control Input Surge Protection: 6kV lineline,
More informationFortimo LED Line High Flux
Line 2 ft 4000 lm 1R HV2 Datasheet Fortimo LED Line High Flux Fortimo LED Line High Flux system are designed to enable LED lighting at higher application heights where more light is needed, such as trunking,
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationModels. Output current max.* Output Power max. Low Line : VAC High Line: VAC 24 VDC / 12 A 240 W. Back up battery
AC/DC Battery Controller Power Supply TSPC-240UPS Series Compact universal 24 VDC power supply with integrated battery controller module Battery protection for over voltage, deep discharge, short circuit
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSTRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
More informationInput Power (Watts) (min/max)
IZT-4PSP32-G@120V Input Voltage 120 Lamp Type Num. of Lamps Rated Lamp Watts Min. Start Temp ( F/C) Input Current (Amps) Input Power (Watts) Ballast Factor MAX THD % Power Factor Lamp Current Crest Factor
More informationWATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
More informationEmergency lighting units EM powerled
BASIC FX 80 W Combined emergency lighting LED Driver Product description Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting LED Driver with manual
More information