Dimmable LED Drivers SMALL SMART CONNECTED

Transcription

1 Dimmable LED Drivers SMALL SMART CONNECTED Revision: October 2017

2 Our Target Markets Indoor Residential and Commercial lighting Outdoor street and area lighting Office lighting Warehouses, manufacturing facilities, and Large retail store application Parking garages Architectural lighting Display / Signage Stage Lighting (entertainment, concert) 2

3 About ERP ERP designs and manufactures energy-efficient LED drivers/power supplies for a wide range of lighting applications: from residential to commercial, industrial, outdoor, office buildings, architectural and stage lighting. Small, yet powerful, ERP products deliver an industry-leading combination of compact size, extensive dimmer compatibility, and high efficiency at competitive cost. Headquartered in Moorpark, CA, ERP owns and operates its own ISO 9001 certified manufacturing facility to ensure quality of design, sourcing, production and testing. Industry leader in high-efficiency (high-power-saving) & high-density (small footprint) LED drivers/power supplies Product offerings include standard and custom solutions for LED Lighting U.S.A. Headquarters in Moorpark, California, with sales/marketing, R&D, and technical support to serve the North-American market China Operations Center in Zhuhai include document center, QA, R&D, manufacturing, and sales / technical support to serve China and Asia Our Presence 1

4 ERP Manufacturing ERP products are manufactured in our wholly owned manufacturing facility in Zhuhai, China. The factory is configured with high-speed production lines for LED drivers and high-density power supplies, as well as state of the art burn-in chambers and automated test equipment. Strategic manufacturing partners provide significant upside capabilities. ERP products go through 100% burn-in to eliminate infant mortality failures. ISO 9001:2008 certified, with regular audits by safety agencies. ERP Quality Quality Management Systems (QMS) Standard Certifications DQA Design Qualification Assurance Reliability testing 4-stage development process Component qualification (Derating, MTBF, Thermal testing) Production auditing ERP products are designed and manufactured to comply with worldwide international IEC standards for lighting applications, and carry certifications by safety agencies such as UL, CSA and Nemko. ERP products also comply with EMC regulations from Europe, and FCC/ICES in North America. QMS Product Qualification Assurance Failure analysis Customer returns SQA IQC PQA Supplier Quality Assurance / Incoming Quality Control Supplier management Material control 2

5 Best-In-Class Forward-phase (TRIAC or leading-edge) and reverse-phase (ELV or trailing-edge) Forward (TRIAC) Phase Control Reverse (ELV) Phase Control Light (% of max output) 120% 100% 80% 60% 40% 20% 0% V Signal Voltage 0-10V control Tri-Mode The ESS, ESP, ESM, EVM, and EVB series of LED drivers are compatible with Tri-Mode from 6 W up to 160 W, i.e. they are compatible with forwardphase (TRIAC or leading-edge), reversephase (ELV or trailing-edge) and 0-10 V dimmers. TRIAC / ELV ERP LED Driver w/ Tri-Mode + DIM - DIM Dimmer NT C 0-10V Broad Compatibility ERP LED drivers deliver an extensive dimmer compatibility. For each LED driver, a dimming compatibility matrix is available upon request, showing how the LED driver scores against a long list of dimmers according to several criteria such as: flicker, shimmer, smooth dimming, no flash at startup, etc Density Hightest Density in the industry The new patent-pending power electronics design delivers more than double the density of the previous generation ERP platform, while delivering times the power density of current industry competitors. 3

6 LED Cross-Reference ERP has developed an extensive cross-reference for 12 different LED manufacturers. This cross-reference can be directly accessed from the ERP website at On the homepage, using the pull-down menus, select the LED manufacturer and then the LED. You may also select your desired drive current. The cross-reference tool will return a list of driver(s) that are the most relevant for your LED selection. You can also access the crossreference by clicking on LED GUIDE at the top of the homepage. The LED guide lists the 12 LED manufacturers whose LEDs have been cross referenced to some of our LED drivers. 4

7 ERP Constant Current and Constant Voltage LED Driver Portfolios Below are two graphs that illustrate our portfolio of constant current and constant voltage LED drivers. ERP LED drivers are targeted at architectural, commercial and industrial applications requiring 10 W to 260 W of power with dimming, programming and connectivity to the Internet of Lights. The color coded drivers are represented in this brochure and include page number references. Efficiency (%) 93% Constant Current LED Drivers PDB/CDB260 - page 20& W (Programmable, 0-10 V dimming only) 90% 8% 82% ESSV - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) ESS & ESST - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) UCP - page W (Forward & Reverse Phase 1-100% ) EBR - page W (Forward & Reverse Phase 1-100% ) ESM - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) EXP-AVI - page W (with Wireless Avi-on Bluetooth Mesh) ESPV - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) ESP & ESPT - page 12& W EVM - page W (Forward, Reverse Phase & 0-10 V, 1-100% ) Types: Phase-Cut Forward-Phase = Leading-Edge, aka TRIAC Reverse-Phase = Trailing-Edge, aka ELV 0-10V SLM - page W (Reverse Phase & 0-10 V, 1-100% ) TLM - page W (Reverse Phase & 0-10 V, % ) (W) Efficiency (%) 93% Constant Voltage LED Drivers VLM60 60 W - page 26 VLM W - page 27 VLB W - page 2 xdrive Dimmer+Driver in 1 40 W - page 24 xdrive Dimmer+Driver in 1 60 W - page 24 xdrive Dimmer+Driver in W - page (W)

8 EBR SERIES 8 W - 21 W Constant Current LED Drivers with Deep TRIAC and ELV (1% to 100%) and with Fast Startup Time 120 Vac, Vac Voltage 21 W 16 to 42 Vdc Current 200 to 700 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase 1 to 100% (% of Iout) Startup Time 10 ms TRIAC / ELV EBR CA Title 24 Diameter: 2.28 (8mm) Height: 1.2 (31.7mm) Iout (ma) Max. (W) Voltage (Vdc) min. max. 120 VAC NOMINAL VOLTAGE EBR010U: 8 to 10 W EBR010U EBR010U EBR010U EBR010U EBR01U: 11 to 1 W EBR01U EBR01U EBR01U EBR01U EBR01U EBR020U: 16 to 21 W EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U EBR020U TO 240 VAC NOMINAL INPUT VOLTAGE EBR010E: 8 to 10 W EBR010E to EBR010E to EBR01E: 11 to 1 W EBR01E to EBR01E to EBR020E: 16 to 21 W EBR020E to EBR020E to representative or send an to: SaveEnergy@ERP-.com Compatible with industry standard TRIAC (forward-phase or leading-edge), and ELV (reverse-phase or trailing-edge) phase-cut dimmers Lifetime: 0,000 hours at 70 C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Recessed lighting (downlights) Commercial & Residential lighting Architectural lighting Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B at 120 Vac and EN01 (CISPR 1) at 220 to 240 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements IP20-rated case with silicone-based potting 94V-0 flammability rating (VA available upon request) 90 C maximum case temperature Class 2 power supply 6

9 ERP SERIES 9 W - 40 W High Density Constant Current LED Drivers with 0-10 V Voltage Current Efficiency Max. Case THD Factor Method 120 to 277 Vac 40 W 16 to 4. Vdc 30 to 1400 ma Constant Current up to 90% 90 C (measured at the hot spot) < 20% > V 10 to 100% NOT RECOMMENDED FOR NEW DESIGNS. FOR NEW DESIGNS, USE THE ESS SERIES. High power density of 8. W/in 3 Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC part 1 Class B (120 Vac) Class A (277 Vac) and EN01 (CISPR 1) at 220 to 240 Vac Complies with ENERGY STAR luminaire specification IP64-rated case with silicone-based potting Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case temperature Class 2 power supply ERP AC Input 2.76 (70mm) + DIM - DIM Temp Sensing Input Dimmer 0-10 V LED Module Temp Sensor 1.7 (40mm) 1.06 (27mm) Iout (ma) ERP020W: 10 to 20 W Max. (W) Voltage (Vdc) min. ERP020W to max. ERP020W to ERP020W to ERP020W to ERP020W to ERP030W: 21 to 30 W ERP030W to ERP030W to ERP030W to ERP030W to ERP030W to ERP040W: 31 to 40 W ERP040W to ERP040W to ERP040W to ERP040W to representative or send an to: SaveEnergy@ERP-.com Commercial lighting Residential lighting Architectural lighting Tunnels and street lighting Wide-area downlights NOT NOT RECOMMENDED RECOMMENDED FOR FOR NEW NEW DESIGNS. DESIGNS. FOR FOR NEW NEW DESIGNS, DESIGNS, USE USE THE THE ESS ESS SERIES. SERIES. 7

10 ERM SERIES 40 W - 70 W High Density Constant Current LED Drivers with 0-10 V Voltage Current Efficiency Max. Case THD Factor Method 120 to 277 Vac 70 W 21 to 82 Vdc 700 to 2100 ma Constant Current up to 90% 90 C (measured at hot spot) < 20% > V 10 to 100% ERM AC Input + DIM - DIM Temp Sensing Input Dimmer 0-10 V LED Module NTC Iout (ma) Max. (W) Voltage (Vdc) min. max. ERM00W: 40 to 0 W ERM00W to ERM00W to ERM00W to ERM060W: 1 to 70 W ERM060W [1] 120 to ERM060W to ERM060W to ERM060W to ERM060W to Not Class 2 representative or send an to: SaveEnergy@ERP-.com 3.21 (81.mm) 2.21 (6.2mm) 1.24 (31.mm) High Bay Lights Troffers Outdoor LED Lighting Office LED Lighting Industrial LED Lighting High current COB LEDs Very High power density in the market: 8.2 W/in 3 Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: FCC CFR Title 47 Part 1 compliant with Class B at 120 Vac and Class A at 277 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case temperature Class 2 power supply 8

11 ESM SERIES 10 W - 60 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with Fast Startup Time 120 to 277 Vac 60 W Voltage 8 to 43 Vdc Current 280 to 170 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase, & 0-10 V 1 to 100% (% of Iout) Startup Time 300 ms Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Lifetime: 0,000 hours at 70 C case temperature Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220 to 240 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements IP20-rated Bottom Leads with Studs metal case with silicone-based potting 90 C maximum case temperature Class 2 power supply TRIAC / ELV 4.19 (106.mm) ESM CA Title 24 + DIM - DIM Dimmer 2.37 (60.3mm) 0.99 (2.2mm) 0-10 V Iout (ma) Max. (W) Voltage (Vdc) min. max. ESM020W: up to 20 W ESM020W to ESM020W to ESM020W Z1 [] 120 to ESM020W to ESM020W to ESM020W SS-F1B [1] 120 to ESM020W SS-F1B [2] 120 to ESM020W to ESM020W to ESM030W: 21 to 30 W ESM030W to ESM030W to ESM030W to ESM030W to ESM030W Z1 [] ESM030W to ESM030W SS-F1B [3] 120 to ESM030W to ESM040W: 31 to 40 W ESM040W to ESM040W to ESM040W to ESM040W to ESM040W SS-F1B [4] 120 to ESM040W to ESM00W: 41 to 0 W ESM00W to ESM00W Z1 [] 120 to ESM00W to ESM00W to ESM060W: 1 to 60 W ESM060W to The ESM020W SS-F1B is specifically intended to drive the Cree LMH2 80 sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 2. The ESM020W SS-F1B is specifically intended to drive the Cree LMH2 120 sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 3. The ESM030W SS-F1B is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. 4. The ESM040W SS-F1B is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string.. Models with the Z1 suffix exhibit a non-linear 0-10V dimming profile:(10v to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com Recessed downlights Commercial lighting Residential lighting Architectural lighting 9

12 ESS/ESST SERIES 6 W - 40 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with Fast Startup Time to 277 Vac, 220 to 240 Vac Max. Case 90 C (measured at the hot spot) 3.30 (84mm) THD Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESSxxxW: TRIAC and ELV dimming only at 120 Vac. ESSxxxE: TRIAC and ELV dimming only at 230 Vac. Linear 0-10 V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1%. Models with the Z1 suffix exhibit a non-linear 0-10V dimming profile(10v to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). Lifetime: 0,000 hours at 70 C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220 to 240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting. IP66 for ESST C maximum case temperature Voltage 40 W 6 to 6 Vdc Factor < 20% > 0.9 ESSxxxW/E TRIAC / ELV 1.7 (40mm) Method Forward-Phase, Reverse-Phase, & 0-10 V + DIM ESS/ESST - DIM 0.99 (2.2mm) CA Title 24 Current 200 to 2100 ma Constant Current Dimmer 3.30 (84mm) ESSTxxxW/E 1 to 100% (% of Iout) 0-10 V Efficiency up to 87% Startup Time 300 ms 1.7 (40mm) 1.07 (27mm) Iout (ma) (W) Voltage (Vdc) min. max. 120 TO 277 VAC NOMINAL VOLTAGE ESS010W: up to 10 W ESS010W to ESS010W to ESS010W to ESS010W Z1 [1] 120 to ESS010W to ESS010W to ESS010W to ESS010W to ESS01W: 11 to 1 W ESS01W to ESS01W to ESS01W to ESS01W to ESS01W Z1 [1] 120 to ESS01W to ESS01W to ESS01W to ESS01W to ESS01W Z1 [1] 120 to ESS01W to ESS01W to ESS01W Z1 [1] 120 to ESS020W: 16 to 20 W ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W to ESS020W Z1 [1] 120 to ESS030W: 21 to 30 W ESS030W to ESS030W Z1 [1] 120 to ESS030W to ESS030W Y1 [2] 120 to ESS030W to ESS030W Z1 [1] 120 to ESS030W to ESS030W to ESS030W Z1 [1] 120 to ESS030W to ESS030W to ESS030W to ESS030W to ESS030W Z1 [1] 120 to ESS030W to ESST040W: 31 to 40 W ESST040W to ESST040W to ESST040W to ESST040W to TO 240 VAC NOMINAL INPUT VOLTAGE ESS010E: up to 10 W ESS010E to ESS01E: 11 to 1 W ESS01E to ESS01E to ESS020E: 16 to 20 W ESS020E to ESS020E to ESS030E: 21 to 30 W ESS030E to ESS030E to ESS030E to ESST040E: 31 to 40 W ESST040E to ESST040E to Non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). 2. Non-linear 0-10V dimming profile: 10V to 9.1V=100%,1.2V to 0.6V=1%, Dim to off <0.68V.

13 ESSV SERIES 6 W - 40 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with UL Class P and VA 120 to 277 Vac 40 W Voltage 14 to 42 Vdc Current 20 to 2100 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse- Phase & 0-10 V 1 to 100% (% of Iout) Startup Time 300 ms TRIAC / ELV 3.30 (84mm) ESSV + DIM - DIM 1.7 (40mm) Dimmer 1.07 (27mm) 0-10 V Iout (ma) Max. (W) Voltage (Vdc) min. max. ESSV010W: up to 10 W ESSV010W to ESSV01W: 11 to 1 W ESSV01W to ESSV020W: 16 to 20 W ESSV020W to ESSV030W: 21 to 30 W ESSV030W to ESSV030W to ESSV030W to ESSV040W: 31 to 40 W ESSV040W to ESSV040W to representative or send an to: SaveEnergy@ERP-.com CA Title 24 Commercial lighting Residential lighting Architectural lighting Wide-area downlights Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers Linear 0-10V dimming transfer function (10V=100%, 1V=10%, 0.1V=1%). Non-linear dimming profile available upon request. Lifetime: 0,000 hours min at 70 C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements IP66-rated thermally-enhanced case with silicone-based potting UL class P VA flammability rating 90 C maximum case hot spot temperature Class 2 power supply 11

14 ESP SERIES 40 W - 60 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with Fast Startup Time Voltage 120 to 277 Vac 60 W 21 to 6 Vdc Current 700 to 1400 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 0-10 V 1 to 100% (% of Iout) Startup Time 300 ms NOT RECOMMENDED FOR NEW DESIGNS. FOR NEW DESIGNS, USE THE ESPT SERIES. Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESPxxxW: TRIAC and ELV dimming only at 120 Vac. ESPxxxE: TRIAC and ELV dimming only at 230 Vac. Lifetime: 0,000 hours at 70 C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR luminaire specification and with DLC (Design Light Consortium ) technical requirements IP64-rated case with silicone-based potting 90 C maximum case hot spot temperature Class 2 power supply TRIAC / ELV 3.43 (87mm) CA Title 24 ESP + DIM - DIM 2.36 (60mm) Dimmer 0-10 V 1.07 (27.2mm) Iout (ma) (W) Voltage (Vdc) min. max. 120 TO 277 VAC NOMINAL VOLTAGE ESP040W: 30 to 40 W ESP040W to ESP040W to ESP040W to ESP040W to ESP040W SS-F1 [1] 120 to ESP040W to ESP00W: 41 to 0 W ESP00W to ESP00W to ESP00W to ESP00W to ESP060W: 1 to 60 W ESP060W to TO 240 VAC NOMINAL INPUT VOLTAGE ESP040E: 30 to 40 W ESP040E to ESP040E to ESP040E to ESP00E: 41 to 0 W ESP00E to ESP00E to ESP060E: 1 to 60 W ESP060E to The ESP040W SS-F1 is specifically intended to drive the Cree LMH sunset module and exhibits a customized 0-10V dimming transfer function. It will not work with any other LED or LED string. representative or send an to: SaveEnergy@ERP-.com Recessed lighting (down lights) Commercial & Residential lighting Architectural lighting NOT NOT RECOMMENDED RECOMMENDED FOR FOR NEW NEW DESIGNS. DESIGNS. FOR FOR NEW NEW DESIGNS, DESIGNS, USE USE THE THE ESPT ESPT SERIES. SERIES. 12

15 ESPT SERIES 40 W - 60 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with Fast Startup Time Voltage 120 to 277 Vac 60 W 21 to 6 Vdc Current 700 to 1400 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 0-10 V 1 to 100% (% of Iout) Startup Time 300 ms TRIAC / ELV 3.43 (87mm) ESPT + DIM - DIM 2.36 (60mm) Dimmer 0-10 V 1.18 (30mm) Iout (ma) (W) Voltage (Vdc) min. max. 120 TO 277 VAC NOMINAL VOLTAGE ESPT040W: 30 to 40 W ESPT040W to ESPT040W Z1 [1] 120 to ESPT040W Z1 [1] 120 to ESPT00W: 41 to 0 W ESPT00W Z1 [1] 120 to ESPT00W Z1 [1] 120 to ESPT00W to ESPT060W: 1 to 60 W ESPT060W Z1 [1] 120 to TO 240 VAC NOMINAL INPUT VOLTAGE ESPT040E: 30 to 40 W ESPT040E to ESPT040E to ESPT00E: 41 to 0 W ESPT00E to ESPT00E to ESPT060E: 1 to 60 W ESPT060E to The ESPTxxxW-xxxx-42-Z1 exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com CA Title 24 Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESPTxxxW: TRIAC and ELV dimming only at 120 Vac. ESPTxxxE: TRIAC and ELV dimming only at 230 Vac. Linear 0-10 V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1%. Models with the Z1 suffix exhibit a non-linear 0-10V dimming profile (10V to 9.1V=100%, 1V to 0.8V=1%, dim-to-off <0.8V). Recessed lighting (down lights) Commercial & Residential lighting Architectural lighting Lifetime: 0,000 hours at 70 C case temperature Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements IP66-rated case with silicone-based potting 90 C maximum case temperature Class 2 power supply 13

16 ESPV SERIES 40 W - 60 W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with UL Class P and VA Voltage 120 to 277 Vac 60 W 28 to 42 Vdc Current 100 to 1200 ma Constant Current Efficiency up to 87% Max. Case 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 0-10 V 1 to 100% (% of Iout) Startup Time 300 ms TRIAC / ELV ESPV + DIM - DIM Dimmer 0-10 V Iout (ma) (W) Voltage (Vdc) min. max. ESP00W: 41 to 0 W ESPV00W Z1 [1] 120 to ESPV00W Z1 [1] 120 to ESP060W: 1 to 60 W ESPV060W Z1 [1] 120 to The ESPVxxxW-xxxx-42-Z1 exhibits a non-linear 0-10V Profile (10V to 9.1V=100%, 1V to 0.8V=1%, <0.8V dim-to-off). representative or send an to: SaveEnergy@ERP-.com 3.43 (87mm) 2.36 (60mm) 1.18 (30mm) Commercial lighting Residential lighting Architectural lighting Outdoor lights CA Title 24 Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmer Non-linear 0-10V dimming profile: 10V to 8.1V=100%, 1V to 0.8V=1%, <0.8V dimto-off<0.8v Lifetime: 0,000 hours min at 70 C case temperature Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements IP66-rated thermally-enhanced case with silicone-based potting UL class P VA flammability rating 90 C maximum case hot spot temperature Class 2 power supply 14

17 EVM SERIES 60 W W Tri-Mode (TRIAC, ELV & 0-10 V) Constant Current LED Drivers with Deep 120 to 277 Vac 120 W 30 to 84 Vdc Voltage Current Efficiency 100 to 3000 ma Constant Current up to 87% Max. Case 90 C (measured at the hot spot) THD Factor < 20% > 0.9 Method Forward-Phase, Reverse-Phase & 0-10 V 1 to 100% (% of Iout) Startup Time 400 ms TRIAC / ELV.67 (144mm) EVM + DIM - DIM Dimmer NT C 2.76 (70mm) 0-10 V 1.7 (40mm) Iout (ma) Max. (W) Voltage (Vdc) min. max. EVM060W: up to 60 W EVM060W C0B 120 to EVM080W: 61 to 80 W EVM080W to EVM080W to EVM080W to EVM090W: 81 to 90 W EVM090W [1] 120 to EVM090W N1B [2] 120 to EVM090W to EVM100W: 91 to 100 W EVM100W [1] 120 to EVM100W [1] 120 to EVM100W to EVM100W to EVM100W to EVM110W: 101 to 110 W EVM110W N1B [1] [3] 120 to EVM110W [1] 120 to EVM120W: 111 to 120 W EVM120W to EVM120W [1] 120 to EVM120W [1] 120 to Not class The EVM090W N1B is specifically intended to drive the Cree LMH module and exhibits a customized 0-10V dimming transfer function. 4. The EVM110W N1B is specifically intended to drive the Cree LMH module and exhibits a customized 0-10V dimming transfer function. CA Title 24 representative or send an to: SaveEnergy@ERP-.com Compatible with TRIAC (forward-phase or leading-edge),elv (reverse-phase or trailing-edge) and 0-10 V dimmers TRIAC and ELV dimming only at 120 Vac Outdoor surge protection: 4 kv line to line/6 kv line to earth Linear 0-10 V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery High Bay Lights Industrial LED Lighting Metal Halide replacement Tunnels and street lighting Outdoor LED Lighting Wide-area downlights Suitable for driving high current COB LEDs such as Cree s CXA300/3070/290/390, Bridgelux Vero series and modules such as Cree s LMH2 6000/8000 Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B (120 Vac)/Class A (277 Vac) and EN01 (CISPR 1) at 220/230/240 Vac IP20-rated Bottom Leads with Studs metal case with silicone-based potting Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case temperature Class 2 power supply (only some models) 1

18 UCP SERIES 4 W - 17 W Low Profile Under-Cabinet Constant Current LED Drivers Voltage Current Efficiency Max. Case THD Factor Method Startup Time 120 Vac 17.3 W 11 to 36 Vdc 120 to 480 ma Constant Current up to 87% 90 C < 20% > 0.9 TRIAC & ELV 1 to 100% 200 ms TRIAC / ELV UCP Max. (W) Iout (ma) Voltage (Vdc) min. max. UCP0: up to W UCP0U UCP10: > to 10 W UCP10U UCP10U UCP1: >10 to 1 W UCP1U UCP1U UCP20: >1 to 20 W UCP20U representative or send an to: SaveEnergy@ERP-.com 4.3 (11mm) 1.02 (26mm) 0.6 (16.mm) Undercabinet Lighting Low profile of 16. mm Compatible with industry standard TRIAC (forward-phase or leading-edge) and ELV (reverse-phase or trailing-edge) 1% to 100% dimmable output Very short startup time of 10 ms 120 Vac nominal input Non-Class 2 (non-isolated) High efficiency: 87% Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: compliant with FCC CFR Title 47 Part 1 Class B Complies with ENERGY STAR, DLC (DesignLight Consortium ) technical requirements 90 C maximum case temperature Lifetime: 0,000 hours min at 40 C ambient temperature 16

19 SLM SERIES 90 W W Tri-Mode (TRIAC, ELV & 0-10 V), High Constant Current LED Drivers with 1-100% 120 to 277 Vac 160 W Voltage 28 to 130 Vdc Current 1.0 to 4.4 A Constant Current Efficiency up to 90% Max. Case 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase & 0-10V 1 to 100% (% of Iout) Startup Time 0. sec TRIAC / ELV SLM 4.00 (101.6mm) + DIM - DIM +12 V / 100 ma Return 12V Dimmer 2.00 (0.8mm) 0-10 V 1.2 (38.mm) Max. (W) Iout (A) Voltage (Vdc) min. max. SLM90W: up to 90 W SLM090W ZA [4] 120 to SLM090W TC [1] 120 to SLM100W: 91 to 100 W SLM100W TA [2] 120 to SLM120W: 111 to 120 W SLM120W TA [2] 120 to SLM120W XA [3] 120 to SLM140W: 131 to 140 W SLM140W ZA [4] 120 to SLM160W: 11 to 160 W SLM160W ZA [4] 120 to SLM160W ZA [4] 120 to SLM160W XA [3] 120 to SLM160W ZA [4] 120 to SLM160W ZA [4] 120 to T: ELV & 0-10 V dimming (1-100%), C: 1kV /2kV surge protection & IP66 2. T: ELV & 0-10 V dimming (1-100%), A: 4kV/4kV surge protection & IP66 3. X: No dimming, A: 4kV/4kV surge protection & IP66 4. Z: 0-10V dimming only (1-100%), A: 4kV/4kV surge protection & IP66 representative or send an to: SaveEnergy@ERP-.com Street Lights Grow Lights/ Horticulture High bay lights Low bay lights Compatible with TRIAC and ELV dimming only at 120 Vac +12 V/100 ma auxiliary output to power external fan, motion or ambient light sensor, or wireless module Surge protection: IEC : 4 kv line to line/4 kv line to earth for outdoor (1 kv line to line/2 kv line to earth for indoor also available) 2. kv ring wave: ANSI/IEEE c & c category A Protections: Under-voltage (brownout), output open load, over-current and short-circuit (hiccup), over-temperature with auto-recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac IP66-rated case with silicone-based potting Lifetime: 0,000 hours Tc = 70 C 90 C maximum case hot spot temperature Complies with ENERGY STAR luminaire specification and DLC (DesignLight Consortium ) technical requirement 17

20 TLM SERIES 90 W W Tri-Mode (TRIAC, ELV & 0-10 V), High Constant Current LED Drivers with 0.01 to 100% Voltage 120 to 277 Vac 160 W 68 to 8 Vdc Current 1.8 A Constant Current Efficiency up to 90% Max. Case 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Forward-Phase, Reverse-Phase & 0-10V 0.01 to 100% (% of Iout) Startup Time 0. sec TRIAC / ELV TLM + DIM - DIM Dimmer 0-10V Iout (A) (W) Voltage (Vdc) min. max. TLM90W: 81 to 90 W TLM90W to TLM160W: 11 to 160 W TLM160W to representative or send an to: SaveEnergy@ERP-.com +12 V / 100 ma Return 12V 4.00 (101.6mm) 2.00 (0.8mm) 1.2 (38.mm) Stage lighting Studio Lighting Diming range: 0.01% 100% with ETC, Leprecon and Elation stage lighting AC phase dimmers +12 V/100 ma auxiliary output to power external fan TLMxxxW: ELV dimming only at 120 Vac Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac Complies with ENERGY STAR luminaire specification and DLC (Design Light Consortium ) technical requirements IP66-rated case with silicone-based potting 90 C maximum case hot spot temperature 18

21 EXP-AVI SERIES 30 W - 0 W Wireless Avi-on Bluetooth Smart Mesh Integrated Constant Current Drivers AC IN Input Voltage + DIM - DIM +12 V / 20 ma Return 12V EXP-AVI Voltage 120 to 277 Vac 44.1 W 30 to 42 Vdc CA Title (87mm) Avi-on Module Current 700 to 100 ma Constant Current Avi-on App 2.36 (60mm) Efficiency up to 82% Avi-on Battery-ed Movable Dimmer(s) 1.07 (27.2mm) EXPN030W AVI and EXPN00W AVI incorporates a fully compliant Bluetooth Smart Mesh module from Avi-on labs ( Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements Dims to off 90 C maximum case hot spot temperature Class 2 power supply Max. Case 90 C (measured at the hot spot) THD Factor Method < 20% > 0.9 Bluetooth 1-100% (% of Iout) Startup Time 300 ms Voltage Iout (Vdc) (ma) (W) min. max. EXPN030W: 21 to 30 W with Bluetooth Mesh Module from Avi-on Labs EXPN030W AVI 120 to EXPN00W: 41 to 0 W with Bluetooth Mesh Module from Avi-on Labs EXPN00W AVI 120 to representative or send an to: SaveEnergy@ERP-.com Avi-on Bluetooth Mesh Solution Wireless lighting controls with simple set-up that anyone can use Pre-integrated Bluetooth Smart + CSRmesh module enables brands to create multi-way controls and switching without additional wiring; no central gateway required Utility grade, secure, reliable mobile app & software, grouping, many users, schedules, timers Virtually unlimited range with mesh Download for free, additional services available Compatible with large ecosystem of products from major brands Avi-on battery-powered movable dimming switches available to complete the turnkey solution Recessed downlights Residential lighting Architectural lighting Commercial lighting ADVANCE ADVANCE INFORMATION INFORMATION 19

22 PDB260 SERIES 260 W Programmable IP66 Constant Current LED Drivers with 0-10 V and 1-100% Voltage Current Efficiency Max. Case THD Factor Method Startup Time 120 to 277 Vac 260 W 114 to 400 Vdc 32 to 1700 ma Constant Current up to 93% 90 C (measured at the hot spot) < 20% > V 1-100% (% of Iout) 00 ms TRIAC / ELV PDB + DIM - DIM Dimmer 0-10 V (W) Iout 1 (ma) Vout 1 (Vdc) Iout 2 (ma) Vout 2 (Vdc) PDB260W: 10 to 260 W PDB260W to to to to to 300 PDB260W to to to to to 200 PDB260W to to to to to 10 representative or send an to: SaveEnergy@ERP-.com Programming 8.4/9.47 (217/240. mm) 2.00 (0.8mm) 1.2 (38.mm) Dual output voltage range selection (only for dual range models) Serial port programming Current: 100% to 0% in each voltage range Maximum output voltage Data log read: SKU, S/N, lot code, hours of operation, FW rev., fault events: power failure, transients (short or surge), thermal events Options Ripple 120 Hz and 100 Hz (IEEE1789) Auxiliary output: up to 24 V / down to 3.3 V / up to 00 ma Alternate 0-10V dimming profiles: Linear, Logarithmic, Ballast type Mark7 (IEC60929, ANSI C82.11) Energy metering (as part of future software upgrade) Street lighting Industrial LED Lighting Outdoor Lighting Wide-area Lighting Tunnels lighting Non-linear 0-10 V dimming profile with dim-to-off (10 V to 9.1 V=100%, 1. V to 0.6 V=1%, <0.6 V=dim-to-off) Auxiliary output 12 V/100 ma IP66-rated case with silicone-based potting Surge protection: Combination wave IEC : 4 kv line to line/4 kv line to earth 2. kv ring wave: ANSI/IEEE c & c category A Ripple: 2% Protections: open load, over-current and short-circuit (hiccup), over-power, over-temperature with foldback and auto-recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac and EN01 (CISPR 1) at 220/230/240 Vac Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case hot spot temperature 20

23 CDB260 SERIES 260 W Programmable IP66 Constant Current LED Drivers with 0-10 V & Communication Voltage Current Efficiency Max. Case THD Factor Method Startup Time 120 to 277 Vac 260 W 114 to 400 Vdc 32 to 1700 ma Constant Current up to 93% 90 C (measured at the hot spot) < 20% > V 1 to 100% (% of Iout) 00 ms TRIAC / ELV CDB + DIM - DIM Dimmer 0-10 V (W) Iout 1 (ma) Vout 1 (Vdc) Iout 2 (ma) Vout 2 (Vdc) CDB260W: 10 to 260 W CDB260W to to to to to 300 CDB260W to to to to to 200 CDB260W to to to to to 10 representative or send an to: SaveEnergy@ERP-.com Programming Dual output voltage range selection (only for dual range models) Serial port programming Current: 100% to 0% in each voltage range Maximum output voltage Data log read: SKU, S/N, lot code, hours of operation, FW rev., fault events: power failure, transients (short or surge), thermal events 8.4/9.47 (217/240. mm) 2.00 (0.8mm) 1.2 (38.mm) Communication Bi-directional (dimming up and down and data log read) Wireless communication protocols Bluetooth Mesh with wire whip antenna and external removable antenna ZigBee with wire whip antenna and external removable antenna Other IEEE protocols available upon request Wired: DALI, DMX Options Ripple 120 Hz and 100 Hz (IEEE1789) Auxiliary output: up to 24 V / down to 3.3 V / up to 00 ma Alternate 0-10V dimming profiles: Linear, Logarithmic, Ballast type Mark7 (IEC60929, ANSI C82.11) Energy metering (as part of future software upgrade) Non-linear 0-10 V dimming profile with dim-to-off (10 V to 9.1 V=100%, 1. V to 0.6 V=1%, <0.6 V=dim-to-off) Auxiliary output 12 V/100 ma IP66-rated case with silicone-based potting Surge protection: Combination wave IEC : 4 kv line to line/4 kv line to earth 2. kv ring wave: ANSI/IEEE c & c category A Street lighting Industrial LED Lighting Outdoor Lighting Wide-area Lighting Tunnels lighting Ripple: 2% Protections: open load, over-current and short-circuit (hiccup), over-power, over-temperature with foldback and auto-recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class A at 120 Vac & 277 Vac and EN01 (CISPR 1) at 220/230/240 Vac Lifetime: 0,000 hours at 70 C case temperature 90 C maximum case hot spot temperature 21

24 xdrive 40 W W 100W Constant Voltage LED Drivers with Integrated Dimmer for Single Gang Box Mount Input Voltage Voltage Current Min Current Max Efficiency Max. Ambient THD Factor Startup Time 120 Vac 100 W 12, 24 V Constant Voltage A up to 92% 40 C < 20% > to 100% 00 ms Pout Max (W) Vout Nom (V) Iout Max (A) VSW40U-12-ERP VSW60U-12-ERP VSW60U-24-ERP VSW100U-24-ERP representative or send an to: SaveEnergy@ERP-.com Track lights, downlights Tape/strip lights, under-cabinet lights CA Title 24 E W max in a single gang box Constant voltage option: 12 & 24 V Maximum output current: 4.2 A is provided via a sliding button On/Off button Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 1 Class B at 120 Vac Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements 90 C maximum case hot spot temperature Class 2 power supply 22

25 VLB260 SERIES 260 W 260 W, Efficient, Compact, Constant Voltage LED Drivers Voltage Current Efficiency Max. Case THD Factor Very high power density of 10.2 W/in 3 IP66-rated case with silicone-based potting Complies with ENERGY STAR luminaire specification and DLC (DesignLight Consortium ) technical requirements 90 C maximum case temperature UL Class P 120 to 277 Vac 260 W 12, 24, 48 Vdc 21.6, 10.8,.4 A up to 93% 90 C (measured at the hot spot) < 20% >0.9 Wiring Diagram WHITE: NEUTRAL BLACK: LINE Worldwide safety approvals VLB260 VLB /9.47 (217/240. mm) RED: +LEDs Blue: -LEDs 2.00 (0.8mm) 1.2 (38.mm) Pout Max Vout Nom lout Max (W) (Vdc) (A) VLB260W: 260 W VLB260W to VLB260W to VLB260W to representative or send an to: SaveEnergy@ERP-.com Horticulture Industrial lights Outdoor and indoor ADVANCE ADVANCE INFORMATION INFORMATION 23

26 VLM40/60 SERIES 40 W 60 W 40 W 60 W, Efficient, Compact, Constant Voltage LED Drivers Voltage Current Efficiency Max. Case THD Factor 120 to 277 Vac 60 W 12, 24, 48 Vdc, 2., 1.2 A up to 93% 90 C (measured at the hot spot) < 20% >0.9 Wiring Diagram VLM40/60 Pout Max (W) Vout Nom (Vdc) lout Max (A) VLM40W: 40 W VLM40W to VLM40W to VLM40W to VLM60W: 60 W VLM60W to VLM60W to VLM60W to representative or send an to: SaveEnergy@ERP-.com Other Mounting Options WHITE: NEUTRAL BLACK: LINE VLM40/60 RED: +LEDs Blue: -LEDs Bottom Leads with Studs European Terminal Blocks.12 (130 mm) 0.78 (19.8mm) 0.78 (19.8mm) Side Leads with Clips Strip lights Pendant lights Linear lights Cove Lights CA Title 24 Very high power density of 19 W/in 3 Class 2 power supply IP20-rated case with silicone-based potting Different mounting options: Side Leads, Bottom Leads with Studs, and Terminal Blocks Complies with ENERGY STAR, DLC (DesignLight Consortium ) and CA Title 24 technical requirements 90 C maximum case temperature UL Class P Worldwide safety approvals 24

27 VLM100 SERIES 96 W 96 W, Efficient, Compact, Constant Voltage LED Drivers Voltage Current Efficiency Max. Case THD Factor 120 to 277 Vac 96 W 12, 24, 48 Vdc 8, 4, 2 A up to 93% 90 C (measured at the hot spot) < 20% >0.9 VLM100 Pout Max (W) Vout Nom (Vdc) lout Max (A) VLM60W: 60 W VLM100W to VLM100W to VLM100W to representative or send an to: SaveEnergy@ERP-.com Other Mounting Options Wiring Diagram WHITE: NEUTRAL BLACK: LINE VLM100 RED: +LEDs Blue: -LEDs Bottom Leads with Studs European Terminal Blocks.39 (137 mm) 1.03 (26.2mm) Side Leads with Clips 0.78 (19.8mm) Strip lights Pendant lights Linear lights Cove Lights CA Title 24 Very high power density of 22 W/in 3 IP20-rated case with silicone-based potting Complies with ENERGY STAR luminaire specification and DLC (DesignLight Consortium ) technical requirements 90 C maximum case temperature Class 2 power supply Worldwide safety approvals 2

28 C SPD SERIES Surge Protectors Input Voltage MCOV/Uc [4] Max. Peak Current (8/20μs) (ka) Combination Wave (1.2/0μs-8/20μs) (kv/ka) Measured Limited Voltage (MLV) [3] (V) Inom [1] Imax [2] Vnom Vmax L-N L-G N-G Thermal Fuse EOL (End of Life) Remote Indicator LED Connection Case SPD-277P-10KA 120 to Parallel A SPD-277P-20KA [] 120 to Parallel B SPD-277S-10KA 120 to A SPD-277S-20KA [] 120 to B SPD-277S-20KA-EILR [] 120 to with EOL Remote LED Indicator B 1. NOMINAL DISCHARGE CURRENT (In) (ka): It is the peak value of the current through the device having a current waveshape of 8/20μs where the device is capable of discharging 1 times. 2. MAXIMUM DISCHARGE CURRENT (Imax) (ka): It is the peak value of the cur rent through the device having a current waveshape of 8/20μs where the device is capable of discharging once. 3. MEASURED LIMITING VOLTAGE (MLV) (V): Maximum residual voltage after the application of 8/20μs impulses at nominal discharge current. 4. MAXIMUM CONTINUOUS OPERATING VOLTAGE (MCOV/Uc) : It is the maximum root-mean-square (rms) voltage that may be continuously applied to the device.. MAXIMUM LOAD: 8 A for xxxs-10ka, 12 A for xxxs-20ka-xxxx representative or send an to: SaveEnergy@ERP-.com Parallel Connection Connection Line in Black Line in Line out Black Black/Orange Green SPD LOAD Green SPD LOAD Neutral White Neutral White Groud Groud Additional level of protection from dangerous power line transient in commercial and industrial applications. Connection with Remote EOL Indicator Line in Line out Black Black/Orange Green SPD White LOAD Blue Black Area & Roadway lighting Factory, Warehouse, and Distribution Center lighting Sports & Stage lighting Airports & Dockyard lighting Red LED Neutral Groud A F D B E TOP BOTTOM B Case A Case B Diameter (E): 3 ( 88.9 mm ) 4 ( mm ) Height (C): 64 ( mm ) 6 ( 16.1 mm ) Top Width (A): 3 ( 88.9 mm ) 4 ( mm ) Bottom Width (B): 33 ( 83.8 mm ) 43 ( mm ) IP67, optimized for use in outdoor applications Protects against surges in accordance with UL1449 and IEEE C C 90 C high temperature flameproof enclosure CAUTION: Only for use with universal input voltage LED drivers (277 Vac) 26

29 XFC SERIES Step-Down Transformers 347/480 Vac Input, 277 Vac Max Load (VA) Max Input Current Vac Max Current (A) Basic Dimensions inches mm A B W H Max Net Weight (lbs) UL Rating ( C) XFC / XFC21-347/ XFC / XFC40-347/ XFC67-347/ ± ± ± ± ± 0.04 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 1 representative or send an to: SaveEnergy@ERP-.com 1.61 ± ± ± ± ± ± ± ± ± ± V (Yellow) (Black) 347 V (Black) 277 V (Violet) Load COM(White) (White) Area & Roadway lighting Factory, Warehouse, and Distribution Center lighting Sports & Stage lighting Airports & Dockyard lighting H W B A Optimized for use with 277 Vac universal input drivers Suitable for indoor and outdoor applications 180 C maximum case hot spot temperature year limited warranty Lead type: (AVLV2, AVLV8), Type 313, 18 AWG (or equivalent), rated 200ºC, 600 V insulation rating, stripped by 10mm and tin plated. 347 V lead wire is pre-insulated. UL 08-1, UL 08-2 UL CCN: XPTQ2, XPTQ8 27

30 UHD SERIES 46 W - 36 W Ultra High Density Open Frame AC-DC, Up to 36 W Supplies 4.00 (102 mm).00 (127 mm) 2.00 (1 mm) 3.00 (76 mm) 1.00 (26 mm) 1.30 (33 mm) UHD160 UHD36 Main V1 V1 (V) Max. Current (A) 12 V Auxiliary V2 (A) Maximum (W) With Fan No Fan UHD UHD UHD UHD UHD UHD UHD UHD UHD representative or send an to: SaveEnergy@ERP-.com Main V1 V1 (V) Max. Current (A) 12 V Auxiliary V2 (A) + Vsb (A) Maximum (W) With Fan No Fan UHD UHD UHD UHD UHD UHD UHD UHD representative or send an to: SaveEnergy@ERP-.com Efficiency over 90% Universal nominal 90 to 264 Vac input density up to 18W/in 3 Active power factor correction (PFC) OVP, OTP and short-circuit protection Fanless, convection-cooled operation Full ITE and medical approvals Stage lighting LED displays RGB LED color mixing Diagnostic and imaging equipment Video, audio and broadcast gear

31

32 U.S.A. Headquarters Tel: Patriot Drive, Suite E Moorpark, CA CHINA Operations Tel: No. 8 Pingdong Road 2 Zhuhai, Guangdong, China 19060