JOB NAME MODEL NO. LAMP OUTPUT VOLTAGE

Transcription

1 Specification Sheet Components LED Control CPS JOB NAME MODEL NO. LAMP Determine the maximum fixture wattage per circuit by adding the wattage of each fixture together and choose an LED power supply that has an available output wattage greater than the total wattage of the fixtures. Model Number/Style CPS Select LED Power Supply Not all options are available in all configurations, consult factory for details. LED POWER SUPPLY SHAPE AVAILABLE OUTPUT WATTS INPUT VOLTAGE OUTPUT VOLTAGE DESCRIPTION MANUFACTURER PS W AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS W AC V DC DAMP LOCATION RECOGNIZED, CLASS DIMMING AC LED PS W AC V DC WET LOCATION RECOGNIZED, CLASS 2 OT96W JBX OSRAM SYLVANIA See CPS11411 for RGB and DMX interface options. LED Power Supply Specification Notes LED power supplies are ordered separately from LED fixtures. Multiple fixtures may be connected to one LED power supply to create a circuit. Total fixture wattage should not exceed the available output watts of power supply rating. Use Available Watts. Power supplies are not shipped with an enclosure. PSE option will include a Damp Power Supply Enclosure. Power supplies are Class 2 rated and carry a 5-year warranty. Remote Wiring Requirements Low voltage circuits are limited by current capacity and voltage drops through conductors. Determine the appropriate cable following the Maximum Cable Length table provided. All fixtures and circuit branches are to be wired in parallel (positive to positive, negative to negative). Install and connect LED power supply to fixtures in accordance with NEC and local regulations. MAXIMUM CABLE LENGTH WIRE AWG V DC 86.4W 19' 30' V DC 100W 22' 35' V DC 60W 38' 55' SPI Lighting contact@spilighting.com 2017 Design modification rights reserved 11018

2 Specification Sheet Components LED Control CPS JOB NAME MODEL NO. LAMP Enclosures for Power Supplies 13.20" 12.60" Knock-Out for 1/2 Trade Conduit: One Each Side Two Total Use with Supplies: PS16 PS " 11.75" 2.21" SPI Lighting Design modification rights reserved 11018

3 ACELEDS.COM ELECTRICAL SPECIFICATIONS: Constant Voltage LED Driver Model Number AC-A60VH2.5 Voltage: V Frequency: 50/60Hz Side Mount/Leads Power Current Min PF (full load) Max THD (full load) Voltage Current T case Max Minimum Starting Temp Efficiency Up To 60W 120V 277V >0.95 <20% V ±5% 0.25 to 2.5A 90 C -30 C 87% WIRING: PHYSICAL: Wiring Lead Lengths White 5.9" Black 5.9" Red 5.9" Blue 5.9" Hot Spot Dimensions Length 9.5" Width 1.7" Height 1.14" Mounting Length 8.9" Mounting Hole Distance xxx" Mounting Hole Diameter xxx" Weight 1.32 lbs. Case Qty. 30 pcs. SAFETY: UL and cul Recognized UL1310 Class 2 UL Outdoor Type 1 Class A sound rating Overload Protection Open/Short Circuit Protection LED driver has a life expectancy of 50,000 hours at Tcase of 75 C LED driver has a life expectancy of 100,000 hours at Tcase of 65 C Warranty: 5 yrs based on max case temp of <75 C; 3 yrs based on max case temp of 90 C* / Isolation FCC Title 47 CFR Part 15 Surge Protection (2 KV) INSTALLATION: LED drivers shall be installed inside electrical enclosures 18 AWG 600V/105C tinned strand copper lead-wires are required for installation Max Remote installation distance is 18 ft LED driver cases should be grounded *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75 C; 3 years from date of manufacture when operated at a max case temp of up to 90 C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy Avenue D, Arlington, TX Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. RoHS COMPLIANT LEAD-FREE 2015 Revised 06/19/2015

4 ELECTRICAL SPECIFICATIONS: Power 100W WIRING: Current 120V 277V ACELEDS.COM Minimum PF (full load) Dimming Max. THD (full load) Voltage >0.95 <10% V ±5% Current 410mA to 4100mA Power Constant Voltage LED Driver Model Number AC-A100VDH4.1 Voltage: V Frequency: 50/60Hz Side Mount/Leads New Improved T case Maximum PHYSICAL: Minimum Starting Temp. Efficiency Up To Dimming Protocol 110W 96 C -40 C 90% 0 to 10V HOT SPOT Dimming Range 10 to 100% Lead Lengths Black 5.9" Blue 5.9" Purple 9.8" White 5.9" Red 5.9" Gray 9.8" LLC DESIGN Dimensions Length 9.5" Width 2.4" Height 1.46" Mounting Length 8.9" Mounting Hole Distance 1.5" Mounting Hole Diameter.20" Weight 1.98 lbs. Case Qty. 20 pcs. SAFETY: UL and cul Recognized UL1310 Class 2 UL Outdoor Type 1 Class A sound rating Overload Protection Open/Short Circuit Protection LED driver has a life expectancy of 50,000 hours at Tcase of 75 C LED driver has a life expectancy of 100,000 hours at Tcase of 65 C Warranty: 5 yrs based on max case temp of <96 C* / Isolation FCC Title 47 CFR Part 15 Surge Protection (2.5 KV) INSTALLATION: LED drivers shall be installed inside electrical enclosures 18 AWG 600V/105C tinned strand copper lead-wires are required for installation Max Remote installation distance is 25 ft LED driver cases should be grounded *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75 C; 3 years from date of manufacture when operated at a max case temp of up to 90 C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy Avenue D, Arlington, TX Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. RoHS COMPLIANT LEAD-FREE 2015 Revised 06/26/2015

5 OPTOTRONIC Electronic V DC LED Power Supplies Key Features & Benefits Damp and wet rated designs available for use in outdoor applications Integrated dimming (select models) Short circuit, overload and overheat protection for sustained performance Wide voltage range: V AC (select models) High power factor and efficiency Broad ambient temperature range for use in extreme application conditions Electronically stabilized output voltage with low line ripple Compact enclosures for variety of applications and fixture designs UL Class 2 output for safe operation Exceptional line and load regulation Product Offering OPTOTRONIC power supplies are compact and electronically stabilized. The wide range of input voltage, on select models, from 100 to 277 VAC enables worldwide use on single-phase AC power lines. These supplies are available with VDC outputs. OPTOTRONIC power supplies are protected against open circuit, short circuit, overload and overheating conditions. They meet the highest industry standards. Ordering Abbreviation OT17W/V/UNV OT20W/V/120-0V/SQ OT30/120/CORD OT50W/V/120V/LP OT75W/V/UNV OT96W/V/UNV OT96W/V/UNV/DIM* OT96W/V/UNV/JBX OT0W/3XV/120-0V/JBX Wattage Voltage LED power supplies compatible with: V LED Modules *Dimmable Application Information Specifications and Certifications Applications Ambience lighting inside furniture Backlighting Compact installations Effect lighting General lighting Low & medium power applications Panel lighting Path and roadway marking Signs Step and seat marking Wall washing OT17, OT20, OT75, OT96, OT96DIM: UL 1310, UL48 Recognized for US & Canada Class 2 Unit OT50: UL1310 Recognized for US & Canada Class 2 Unit OT96 (NAED 51626) & OT0 (NAED 51627): UL48 Listed for US & Canada Class 2 Unit OT30: ETL listed and conforms to UL1310 OT75 is CSA approved FCC 47CFR Part 15 compliant ECS050R

6 Specification Data Fixture Description: Project/Job: SYLVANIA lamp: SYLVANIA ballast: Notes: Type Ordering Information Nominal Nominal Nominal Max. Power Line Item Ordering Voltage Current Power Power Voltage Range Ripple UL/ETL Location Number Abbreviation (V) (A) Factor (W) (VDC)* (W) (V) File # Rating OT17W/V/UNV* ±1.0V E Damp OT20W/V/120-0V/SQ ±0.2V E Dry OT30/120/CORD ±1.5V Dry OT50W/V/120V/LP ±0.2V E8522 Dry OT75W/V/UNV ±0.2V E Damp OT96W/V/UNV ±1.0V E Damp OT96W/V/UNV/JBX ±1.0V E Wet UL Listed OT0W/3XV/120-0V/JBX ±1.0V E Wet UL Listed *7W is the minimum output power required when operating at the 277V input voltage. Dimmable Power Supply Nominal Nominal Nominal Max. Voltage Power Line Item Ordering Voltage Current Power Power Range Range Ripple Dimming Dimming Dimming UL Location Number Abbreviation (V) (A) Factor (W) (VDC)* (W) (V) Mode Control Range File # Rating OT96W/V/UNV/DIM ±1.0V PWM 0-10V DC % E Damp * Voltage tolerance ±5% Notes: 1. All power supplies can be remote mounted up to 32 feet. Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference). 2. Use wiring rated and marked PLTC, CL3R, and sun resistant replaces (OT75/120/), which is discontinued replaces 51510, which is discontinued Ordering Guide OT 0W / 3xV / / JBX OPTOTRONIC Wattage Voltage Voltage Junction Box Minimum and Maximum Ratings Parameter Power Supply Values Voltage Range (Min/Max) OT20 and OT VAC OT30 and OT VAC OT17, OT75 and OT VAC Frequency 50/60Hz Ambient Temperature Range OT20 and OT50-20 C through +50 C OT30, OT96-20 C through +40 C OT75-25 C through +60 C OT17, OT96JBX and OT0-30 C through +70 C (2% de-rating per C from 50 C) Max. Case Temperature OT30 45 C OT50 70 C OT20, OT96 75 C OT17, OT75, OT96JBX and OT0 90 C

7 Assembly and Wiring Diagrams OT17 Case: Quantity: 50 pieces/carton Weight: 0.36 lbs each (approx.) 18.3 lbs/carton Wiring: Leads only (no connectors) : 6" (18AWG wire) black & white wires : 6" (18AWG wire) gray+ and black wires 0.87" (22mm) 0.98" (25mm) 0.08" (2mm) 7.87" (200mm) 8.27" (210mm) 8.43" (214mm) 0.16" (4mm) OT20 Case: Quantity: 30 pieces/carton Weight: 0.21 lbs each (approx.) 6.30 lbs/carton Wiring: Connectors only (No leads provided) Use solid or stranded copper wire only 2.36" (60.0mm) 2.20" (56.0mm) Load side: use 30 to 14 AWG wire Line side: use 20 to 12 AWG wire N L VDC + Load 2.20" (56.0mm) 1.20" (30.5mm) Line 2.36" (60.0mm) OT50 Case: Quantity: 20 pieces/carton Weight: 0.4 lbs each (approx.) 8.5 lbs/carton 1.5 (38.1mm) Wiring: Connectors only (No leads provided) Use 14-22AWG solid or stranded copper wire only 8.95 (227.4mm) 9.5 (1.4mm) 0.65 (16.5mm) 0.18 (4.6mm) OUTPUT Pout(max): 30W Vout: VDC Iout: 1.25 ADC 5.63" (143mm).14" (3.50mm).75" (19.1mm) OT30 Case: Quantity: 50 pieces/carton Weight: 0.63 lbs each (approx.) lbs/carton.22" (5.60mm) 1.44" (36.50mm).14" (3.50mm).12" (3mm) (2) MOUNTING HOLES 5.91" (150mm) 1.18" (30mm) 1.57" (40mm) SWITCH LINE Pin (max): 30W Vin: 120VAC/50/60HZ Iin: 0.60A (nom.) 6 Feet 1.8 Meters 7 Feet 2.1 Meters

8 Assembly and Wiring Diagrams (continued) Warranty OT75 & OT96 Case: Quantity: 10 pieces/carton Weight: 1.35 lbs each (approx.) 14 lbs/carton Wiring: Leads only (no connectors) AC : 9" (18AWG wire) black & white wires : 9" (18AWG wire) red+ & blue wires 1.17" (29.7mm) 1.68" (42.7mm) 8.94" (227mm) 9.48" (0.7mm) OPTOTRONIC Products are covered by our LED Module, OPTOTRONIC Power Supply or Control Warranty. For additional details, refer to the latest version of the warranty available at OT96DIM only: DIM : 9" (18AWG wire) gray & purple DIM : 9" (18AWG wire) yellow OT96JBX Case (Wet Rated): Quantity: 16 pieces/carton Weight: 2 lbs each (approx.) 33 lbs/carton Wiring: Leads only (2.76" 18AWG wire) : black (L), white (N), & green/yellow (GRD) wires with a UL Listed, 1/2" metallic fitting : gray (+) & black ( ) with a UL Listed, 1/2" plastic fitting OT0 Case: Quantity: 5 pieces/carton Weight: 11 lbs each (approx.) 53 lbs/carton Wiring: Leads only (6.9" 18AWG wire) Black (L) White (N) Green/Yellow (GRD) Line Black (L) White (N) Purple (+) Gray (-) Black (L) White (N) Purple (+) Gray (-) Load VDC VOLTAGE V AC 50/60Hz 0-10 V DC VOLTAGE V AC 50/60Hz 0-10 V DC NON-DIMMABLE 80W (max) Gray (+) Black (-) 80W (max) Gray (+) Black (-) 80W (max) Gray (+) Black (-) Pout (max): 96 W Vout: VDC Iout: ADC DIMMABLE Pout (max): 96 W Vout: VDC Iout: ADC RED V DC (+) Return (-) BLUE DIM Return (-) YELLOW n.c. RED V DC (+) Return (-) BLUE n.c. DIM Return (-) YELLOW United States OSRAM SYLVANIA 100 Endicott Street Danvers, MA LIGHTBULB Trade Phone: Fax: National Accounts Phone: Fax: OEM/Special Markets Phone: Fax: Retail Phone: Fax: SYLVANIA Lighting Services Phone: Fax: Display/Optic Phone: Fax: Canada OSRAM SYLVANIA LTD Drew Road Mississauga, ON L5S 1S LIGHTBULB Trade Phone: Fax: OEM/Special Markets/Display/Optic Phone: Fax: Retail Phone: Fax: SYLVANIA Lighting Services Phone: Fax: Mexico OSRAM MEXICO Tultitlan/Edo de Mexico Phone: ENCELIUM Products United States Phone: Fax: Canada Phone: Fax: OSRAM SYLVANIA 9-13 SYLVANIA and The System Solution, are registered trademarks of OSRAM SYLVANIA Inc. OSRAM and OPTOTRONIC are registered trademarks of OSRAM GmbH. Specifications subject to change without notice. /sylvania /sylvania