EATON 9315 UPS 200 TO 300 KVA Specifications

Size: px

Start display at page:

Download "EATON 9315 UPS 200 TO 300 KVA Specifications"

Claude Stephens
6 years ago
Views:

1 EATON 9315 UPS 200 TO 300 KVA Specifications Input Voltage Range See table below Frequency Range (60Hz) Hz (50Hz) Hz Surge Protection Meets ANSI C62.41, Category A & B EN and EN Power Factor 0.95 Typical at full load with input filter Output Voltage Regulation Better than +/- 1% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1 cycle (2.5 ms) Frequency Regulation (Free Run) +/ Hz Frequency Sync Range +/- 0.5 Hz Frequency Slew Rate 1 Hz/sec. Load Crest Ratio 3:1 Battery Battery Type Sealed, maintenance-free lead acid Recharge time 10-12x discharge to 95% capacity Safety UL 1778 Listed CUL CAN/CSA C22.2NO M91 Listed All Cabinets provide seismic mounting features selectable DC ground fault detection capability Environmental and Safety Audible Noise <65 dba at 1 meter Ambient Operating Temperature 0C to 40C Ambient Storage Temperature -20C to +70C Altitude 5000 ft. (1500 m) without derating Relative Humidity 5-95% non-condensing

2 EMI Suppression Meet FCC Class A, Subpart J of Part 15 and EN (CIPR22,ClassA) Electrostatic Discharge Withstands 25 kv without damage or disturbance to load * Specifications subject to change without notice. MODEL SELECTION GUIDE / / kva /160 kw 200 kva /160 kw 250 kva /200 kw 225 kva /180 kw 225 kva /180 kw 300 kva /240 kw Input voltage volts Output Voltage volts Input Voltage Range Minimum volts Maximum volts Input /Output Frequency Hz 50/60 50/60 50/ AC Input (with input filter) Nominal Amps amps Maximum Amps amps AC Input (without input filter) Nominal Amps amps Maximum Amps amps Bypass Input Nominal Amps amps AC Output Nominal Amps amps

3 10 Minutes Max. amps DC Link Nominal DC Voltage volts Float Voltage volts End of Discharge volts Maximum Amps amps Physical attributes (without battery) Installed Weight lbs Installed Width inches System Efficiencies 100% Load % % Load % % Load % Full Load Heat Dissipation BTU/Hr. (x1000) KCal/Hr. (x1000) Inverter Efficiency (full load) - % BATTERY RUN TIMES (IN MINUTES) 50 Hz Applications Model Number kva

4 kw Battery Type Number Parallel Strings J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL

5 Nominal DC Link Voltage Hz Applications Model Number kva kw Battery Type Number Parallel Strings J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS

6 C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL Nominal DC Link Voltage EATON 9315 UPS 400 TO 500 KVA Specifications Input Voltage Range See table below Frequency Range (60 Hz) Hz Surge Protection Meets ANSI C62.41, Category A & B EN and EN Power Factor 0.95 Typical at full load with input filter Output Voltage Regulation Better than +/- 1% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1 cycle Frequency Regulation (Free Run) +/ Hz Frequency Sync Range +/- 0.5 Hz Frequency Slew Rate 1 Hz/sec. Load Crest Ratio 3:1 Power Factor 0.9 (Optional) Battery

7 Battery Type Sealed, valve regulated lead acid Recharge time 10-12x discharge to 95% capacity Safety UL 1778 Listed CUL CAN/CSA C22.2NO M91 Listed All Cabinets provide seismic mounting features selectable DC ground fault detection capability Environmental and safety Audible Noise <72 dba at 1 meter Ambient Operating Temperature 0 C to 40 C Ambient Storage Temperature -20 C to +70 C Altitude 5000 ft. (1500 m) without derating Relative Humidity 5-95% non-condensing EMI Suppression Meet FCC Class A, Subpart J of Part 15 and EN (CIPR22,ClassA) Electrostatic Discharge Withstands 25kV without damage or disturbance to load * Specifications subject to change without notice. MODEL SELECTION GUIDE / / kva/320 kw 300 kva/240 kw 500 kva/400 kw 400 kva/320 kw Input Range Input Voltage volts Output Voltage Output Voltage volts Input Voltage Range Minimum volts Maximum volts Input /Output Frequency Hz 50/60 50/ AC Input (with input filter) Nominal Amps amps

8 Maximum Amps amps AC Input (without input filter) Nominal Amps amps N/A Maximum Amps amps N/A Bypass Input Nominal Amps amps AC Output Nominal Amps amps Minutes Max. amps DC Link Nominal DC Voltage volts Float Voltage volts End of Discharge volts Maximum Amps amps Physical Attributes (with-out battery) Installed Weight lbs ,100 14,100 Installed Width inches System Efficiencies 100% Load % % Load % % Load % Full Load Heat Dissipation BTU/Hr. (x1000) KCal/Hr. (x1000) Inverter Efficiency (full load) - %

9 BATTERY RUN TIMES (IN MINUTES) 50 Hz Applications Model Number kva kw Battery Type Number Parallel Strings J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS

10 C50 - HRL Nominal DC Link Voltage Hz Applications Model Number kva kw Battery Type Number Parallel Strings J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL J47 - UPS C50 - HRL J27 - UPS C28 - HRL J31 - UPS C33 - HRL J37 - UPS C39 - HRL

11 J47 - UPS C50 - HRL Nominal DC Link Voltage POWERWARE 9315 UPS 625 TO 750 KVA Specifications Input Voltage Range +10% to -15% Frequency Range +/-5% Surge Protection Meets ANSI C62.41, Category A & B, EN and EN Power Factor 0.95 Typical at full load with input filter Output Voltage Regulation Better than +/- 1% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1 cycle Frequency Regulation (Free Run) +/ Hz Frequency Sync Range +/- 0.5 Hz Frequency Slew Rate 1 Hz/sec. Load Crest Ratio 3:1 Safety (pending) UL 1778 Listed CUL CAN/CSA C22.2NO M91 Listed EN All Cabinets provide seismic mounting features, selectable DC ground fault detection capability Environmental Audible Noise <75 dba at 1 meter Ambient Operating Temperature 0 C to 40 C Ambient Storage Temperature -20 C to 70 C

12 Altitude 5000 ft. (1500 m) at 40 C without derating Relative Humidity 5-95% non-condensing EMC Meet FCC Class A, EN (CISPR 22, Class A, Restricted Access) Electrostatic Discharge Withstands 25kV without damage or disturbance to load *Specifications subject to change without notice. MODEL SELECTION GUIDE / kva/600 kw 625 kva/500 kw Input Voltage volts Output Voltage volts Input Voltage Range Minimum volts Maximum volts Input/Output Frequency Hz AC Input (with input filter) Nominal Amps amps Maximum Amps amps Bypass Input Nominal Amps amps AC Input (without input filter) Nominal Amps amps minutes max amps DC Link Nominal DC Voltage volts Float Voltage volts End of Discharge volts

13 Nominal Amps amps Physical Attributes (w/o batt.) Single Module RT Configurations Installed Weight lbs 13,200 13,200 13,200 13,200 Installed Width inches 149" 149" 149" 149" Multimodule Configurations Installed Weight lbs 12,600 12,600 12,600 12,600 Installed Width inches 126 5/8" 126 5/8" 126 5/8" 126 5/8" System Efficiencies 100% Load % % Load % % Load % Full Load Heat Dissipation BTU/Hr. (x1000) KCal/Hr. (x1000) Inverter Efficiency (Full Load) %

Eaton 93PS 8-40kW UPS Technical Specification Manufacturer s declaration in accordance with IEC

Eaton 93PS 8-40kW UPS Technical Specification Manufacturer s declaration in accordance with IEC Manufacturer s declaration in accordance with 8- Frame Model catalogue reference 93PS-XX(20)-YY- 93PS-XX(40)-YY- Number of power modules (UPM) 1 1 or 2 Number of internal batteries 0 to 2 x 32 blocks 0