Rental Rates Wyoming Machinery Company. Build Equity Through Rental

Transcription

1 Build Equity Through Rental Rental Rates Wyoming Machinery Company Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) EFFECTIVE JANUARY 208 All rates subject to change without notice. w w w. w y o m i n g c a t. c o m

2 EQUIPMENT SALES Jeremiah Wolski Equipment Sales Gillette: (307) Mobile: (307) Dan Holman Equipment Sales Casper: (307) Mobile: (307) Tom Carr Used Equipment Sales Casper: (307) Mobile: (307) Terry Stone Equipment Sales Casper: (307) Mobile: (307) Keith Cashman Equipment Sales Casper: (307) Mobile: (307) MINING SALES Norm Sve Equipment Sales Rock Springs: (307) Mobile: (307) David Simonson Mining Representative Casper: (307) Mobile: (307) Justin Kolata Product Support Sales Gillette: (307) Mobile: (307) OUT OF TERRITORY SALES Tom Carr Used Equipment Sales Casper: (307) Mobile: (307) Mark Mahnen Used Equipment Sales Casper: (307) Mobile: (307)

3 SALES EQUIPMENT INVENTORY COORDINATORS Trevor Alt Casper: (307) Mobile: (307) Jonathan Hartman Gillette: (307) Mobile: (307) Cody Buckhaults Cheyenne: (307) Mobile: (307) CERTIFIED OPERATOR TRAINERS ATTACHMENTS Ryan Mason Machine Inspector Gillette: (307) Mobile: (307) Justin Noah Machine Inside Sales Casper: (307) ext.36 Mobile: (307) MACHINE SALES & SUPPORT REPS Dave Anderson Gillette: (307) ext. 99 Mobile: (307) Alex Oates Rock Springs: (307) ext.630 Mobile: (307) Jeff Baynard Cheyenne: (307) ext.50 Mobile: (307) Blaine McMurtey Casper: (307) ext. 6 Mobile: (307) Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) w w w. w y o m i n g c a t. c o m

4 RENTAL /LEASE INFORMATION & RESPONSIBILITIES. All Standard Rent/Lease Terms and Conditions will apply as described in the Wyoming Machinery Company Rent/Lease Agreement. 2. Rental Rates are based on 76 hours per 28 day period. Double Shift based on 352 hours (.75 X Single Shift Rate). Triple Shift based on 528 hours (2.5 X Single Shift Rate).Continuous Shift based on 672 hours (2.75 X Single Shift). Winter Rates.65 X period rate for 00hr/period. New model may warrant price change. 3. Extra hours per period or overtime will be billed at any time and in Wyoming Machinery Company s discretion, normally upon return of the equipment. 4. Rental rates are subject to equipment availability and are subject to change without notice and will increase for rock and heavy abrasive applications. 5. Rental Rates do not include: transportation of equipment, all applicable state sales use taxes, mobile machinery fees and any UCC fees. 6. Rental Rates do not include assembly and disassembly charges. 7. Rental Rates do not include additional buckets, forks, and work tools. 8. First month rent due in advance without prior credit approval. 9. Equipment will not be shipped unless lessee has an account approved by the Wyoming Machinery Company Credit Department. 0. During the initial eighteen billing cycles Wyoming Machinery Company will provide labor and materials for necessary and required major mechanical repairs on the equipment arising from normal use.. In the event the equipment is damaged and requires repair the terms and conditions of the Rent/Lease Agreement shall continue during the period of repair. 2. After eighteen billing cycles Wyoming Machinery Company has the discretion to replace the equipment with substitute equipment of the same or similar capabilities. 3. After eighteen billing cycles all costs associated with repairs and maintenance are the sole responsibility of Lessee. 4. Lessee will be responsible for all damage to the equipment and insure the equipment for physical damage at the stated replacement value. 5. Lessee is responsible for daily lubrication, normal maintenance and daily inspection of equipment at all required intervals. 6. Wyoming Machinery Company will supply Scheduled Oil Sampling kits. Lessee will provide labor to take all required oil samples. 7. Lessee is responsible for replacement of ground engaging tools. 8. Lessee will be charged for damage, cuts and wear to rubber track belts and tire equipment. Measured rubber track or tire wear will be billed based on /32nd of wear. 9. D.O.T. driver with CDL is required for on-highway trucks. 20. Lessee shall operate all units in a safe and reasonable manner using only qualified operators. Wyoming Machinery Company offers several levels of operator training. 2. Wyoming Machinery Company offers Maintenance Service Contracts at some locations for an additional charge. 22. Wyoming Machinery Company will provide equipment with a full tank of fuel at the beginning of the term. 23. Lessee will return equipment with a full tank of fuel or be charged for fueling the equipment. 24. Equipment should be returned in a reasonably clean condition. 25. Purchase option is available on most models. 26. Lessee is not allowed to re-rent to a third party. 27. Maintenance contracts available at a fee based charge. Tier 4 engines that take DEF fluid needs to meet the ISO 224- requirement. DO NOT use agricultural grade urea solutions in DEF for they will cause harm to SCR emissions system. Not withstanding the foregoing, the fully executed Rental/Lease Agreement constitutes the entire agreement between the parties with respect to the equipment and supersedes any other written or oral communications, specifically including this information. Additional terms and responsibilities may apply for specific models. For additional information and model availability contact Bill Waxler/Fleet Manager, at (307) Rental rates and additional information available at Rental rates and additional information available at

5 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME COMPACT CONSTRUCTION EQUIPMENT Compact Wheel Loaders* 908 (82 HP.3 yd) $ 3, (70 HP.3 yd) $ 3, (70 HP.8 yd) $ 2, (40 HP 0.8 yd) $ 2,700 *Add $50 for forks.**tire wear charged. Skid Steer Loaders 272D Hi Reach (94 HP, 3.25K lbs) $ 2, D Hi Reach (84HP, 2.7K lbs) $ 2, C Hi Reach (84HP, 2.7K lbs) $ 2, D Hi Reach (74HP, 2.5K lbs) $ 2, D (67HP,.8K lbs) $ 2,00 246D (75HP, 2.5K lbs) $ 2, C (74HP, 2.5K lbs) $ 2, D (74HP,.8K lbs) $ 2, D/226B3 (67HP,.5K lbs) $,950 *Weight is for lift capacity of machine and horsepower is gross horsepower.**tire wear charged. Compact Track Loaders* 299D (90 HP, 4.K lbs) $ 4, D (82 HP, 3.8K lbs) $ 4, D (82 HP, 3.2K lbs) $ 4, C (82 HP, 3.2K lbs) $ 4,50 259D (7 HP, 2.9K lbs) $ 3, D (67 HP, 2.3K lbs) $ 3, D (67HP, 2.0K lbs) $ 3,400 *Weight is for lift capacity of machine and horsepower is gross horsepower. Multi Terrain Skid Steers* 297D (98HP, 4.5K lbs) $ 4, D (74HP, 4.0K lbs) $ 4, D (74HP, 3.3K lbs) $ 4, C (74HP, 3.2K lbs) $ 4,00 257D (74HP, 2.8K lbs) $ 3, B (56HP, 2.K lbs) $ 3,500 *Additional charges for excessive undercarriage wear and/or belt damage.*weight is for lift capacity of machine and horsepower is gross horsepower. Work Tools for SSL/CTL/MTL* Forks $ A4 Auger $ 600 (Customer buys bit) - A9 Auger $ 700 (Customer buys bit) - Broom $, Snow Push 8 ft./0 ft $, Way Dozer $, Snow Blower $ 2, Brush Hog $, *Numerous additional work tools available. Call (307) ext. 36 for complete list.

6 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME Excavators 374D/F (66K lbs) $25, F $9, F (7K lbs) $7, E (0K lbs) $6, D (09K lbs) $5, E LR $3, F (86K lbs) $2, E Hybrid (82K lbs) $2, E (82K lbs) $2, E with hammer $24, F CR (77K lbs) $0, D (79K lbs) $0, F LR (77K lbs) $2, F (77K lbs) $ 9, F LR (77K lbs) $2, F (67K lbs) $ 9, E (64-67K lbs) $ 9, D CR (80K lbs) $0, D (64K lbs) $ 8, F (59K lbs) $ 8, F CR (56K lbs) $ 8, E (59K lbs) $ 8,000 32D CR (54K lbs) $ 7, F Grade (54K lbs) $0, F (54K lbs) $ 7,00 320F (54K lbs) $ 7, E RR (52K lbs) $ 6, E (50K lbs) $ 6,800 38F (40K lbs) $ 6,700 38E (42K lbs) $ 6,500 36F (36K lbs) $ 5,800 36E (39K lbs) $ 5,700 35F CR (34K lbs) $ 5,500 34E CR (34K lbs) $ 5,200 33FGC (29K lbs) $ 4,900 3F RR (24K lbs) $ 4,700 *Requires assembly and disassembly charge. Excavator with Hammer 336E $24,000 34E CR $, $ 8,900 Mini-Excavators 308E CR (9K lbs) $ 4, E (8K lbs) $ 4, E CR (2K lbs) $ 3, E CR (.5K lbs) $ 3, E CR (8.9K lbs) $ 3, E (8.2K lbs) $ 2, E (6.9K lbs) $ 2, (6.9K lbs) $ 2,700 *307 and 308: Additional buckets $500 - Thumbs $,000 **302 to 305.5: Additional buckets $50 - Thumbs $50. Add $,500 for Hammer H65, add $2,500 for Hammer H80. Add $,500 for CVP40 plate compactor.

7 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME Additional Buckets & Thumbs CV0 FOR 320 Class hoe $ 3, Compactor wheel B link for CW36 $, Compactor wheel B link for CW24 $, & 349 Bucket $ 2, to 336 Bucket $, to 38 Bucket $, Thumbs 324 to 336 $, Thumbs 3 to 32 $, Thumbs 307 & 308 $, Vaccuworx RC2 $ 7, Vaccuworx shoes-additional shoes $,750 (per set) - - Kryto Claw Bucket for CB linkage $ 3, Kryto Claw Bucket for DB linkage $ 3, Ripper Shank T linkage $,500 - BUILDING AND CONSTRUCTION EQUIPMENT Backhoe Loaders* 450F $ 5, F $ 3, E $ 3, F $ 3, E *Tire wear charged $ 3,300 Additional Buckets & Thumbs H80E Hammer $ 2,500 H65E Hammer $,500 Compactor Wheel 420 $,000 Backhoe Thumb $ 450 IT Forks/Flip Over Forks $ 225 Additional 30 or 36 buckets $ 225 Additional 2 or 24 buckets $ 50 CVP40 Plate Compactor $,500 Snow Push 2 $,500 Snow Push 0 $,300 Telehandlers* TL255D (2K lbs - 55 ft) $ 5,300 TL255C (2K lbs - 55 ft) $ 5,200 TH54D (K lbs - 45 ft) $ 5,000 TH54C (K lbs - 45 ft) $ 4,900 TL055D (0K lbs - 55 ft) $ 4,900 TL055C (0K lbs - 55 ft) $ 4,900 TL943D (9K lbs - 43 ft) $ 4,300 TL943C (9K lbs - 43 ft) $ 4,300 TL642 (6.5K lbs - 42ft) $ 3,700 TH255C (5.5K lbs-20 ft) $ 3,00 *Add $600 for bucket.*material Arm $500.*Tire wear charged.

8 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME Track Type Tractors DT* (U,RR) $64,000 D0T* (U,RR) $42,000 D9T* (U/RR) $3,000 D8T (SU, RR Accugrade System) $24,000 D8T (SU/Angle/U) (RR/WN) $20,000 D7E (SU/Angle) (RR/WN) $6,500 D6T LGP (S/VPAT) $4,000 D6T XW (VPAT/Accugrade System) $6,800 D6T XW (SU/VPAT/ANGLE) $3,000 D6T (VPAT/Accugrade) $5,300 D6T (SU or VPAT) $,500 D6N LGP (VPAT/Accugrade) $3,600 D6N LGP (VPAT) $ 9,800 D6N (VPAT/Accugrade) $2,300 D6N (VPAT) $ 8,500 D6K LGP (VPAT/Accugrade) $,00 D6K LGP (VPAT) $ 7,300 D6K (VPAT/ Accugrade) $0,400 D6K (VPAT) $ 6,600 D5K (VPAT/Accugrade) $ 9,400 D5K (VPAT) $ 5,600 D4K (VPAT/ Accugrade) $ 9,200 D4K (VPAT) $ 5,400 *D, D0 and D9 may require assembly and disassembly charges. Most tractor with rippers. TRUCKS Articulated Trucks 745C (45T, 34yd) $2, /740B (43T, 3 yd) $8, C (36T, 28 yd) $7, C (3T, 23 yd) $4, (30 T, 22 yd) $4, C (26 T, 20 yd) $2,300 *Tire wear charged. Water Trucks* 777G** (20,000 gal) $44, /740B ADT (8,000 gal) $8, ADT (6,000 gal) $4, ADT (5,000 gal) $2,500 On Highway Truck (4,000 gal) $ 6,300 Water Tank Stand (2,000 gal) $ 2,700 *On Highway Trucks require CDL License. FET tax charge on rental. ** 777 trucks require assembly.***tire wear charged.

9 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME Motor Graders* 24M (533 HP) $60,000 (6 period commitment) 8M (322 HP) $22,750 6M ( HP) $22,000 4M ( HP) $4,000 4H (220 HP) $2,500 60M3 AWD ( HP) $2,000 60M2 AWD ( HP) $,900 40M3 AWD ( HP) $,500 40M2 AWD ( HP) $0,700 40M AWD ( HP) $0,200 40M3 ( HP) $0,000 40M2 ( HP) $ 9,800 40M ( HP) $ 9,400 2M3 AWD (79-23 HP) $0,000 2M2 AWD ( HP) $ 9,900 2M3 (79-23 HP) $ 9,000 2M2 ( HP) $ 8,800 20M3 AWD(79-23 HP) $ 8,900 20M2 (45-89 HP) $ 8,000 *Add $4,000 for Snow Plow and Lift Group for 2/40/60. *Add $4,300 for Snow Plow and Lift Group for 4M. Add $2,000 for Snow Wing for 2/40. **Add $2,600 for Walk-n-Roll WR90 roller. **Add $2,400 for Walk-n-Roll WR75 roller. Add $3,800 for Accugrade.** Tire wear charged.***24m is a 6 period commitment. Scrapers 637K (34 yd) $ 35, G (34 yd) $ 33, K (24 yd) Grade Control $ 28, K (24 yd) $ 23, H (24 yd) $ 23, G (22 yd) $ 2, K (23 yd) *Tire wear charged. $ 23,500 Wheel Dozers* 854K $ 63,000 (6 period commitment) 834K $ 38,000 (6 period commitment) *854 & 834 are 6 period commitments. **Tire wear charged. Pipelayers/Side Booms PL6 $ 8,500 D6NLGP Vanguard/PAT $ 8,500 Disks Rome Disk $ 4,200

10 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME Wheel Loaders 988K* (0 yd) $26, K* (9 yd) $23, M* (8 yd) $7, M* (7.5 yd) $5, K* (7.5 yd) $4, M* (7.0 yd) $3, K* (6.0 yd) $2, H* (6.0 yd) $2, M* (5.5 yd) $, K* (5.25 yd) $0, M (4.75 yd) $ 9,00 962K* (4.75 yd) $ 8, M* (4.5 yd) $ 8, K* (4.5 yd) $ 8,00 950GC* (4.25 yd) $ 7, M* (3.5 to 4.0 yd) $ 6, K* (3.5 to 4.0 yd) $ 6, M* (3.0 yd) $ 5, K* (3.0 yd) $ 5, M* (2.7 yd) $ 5,00 924K* (2.7 yd) $ 4, H* (2.6 yd) $ 4,350 98M* (2.2 yd) $ 4,200 94K* (2.2 yd) $ 4,000 *Tire wear charged on all Wheel Loaders Additional Buckets & Thumbs Top Clamp Forks (930) $ 3,000 2 Snow Push $,700 0 Snow Push $,500 Wide Carriage Forks ( ) $ 800 Standard Forks ( ) $ 500 Material Arm $ 500

11 MACHINE MODEL PERIOD 3 PERIOD 6 PERIOD OVERTIME ROAD AND PAVING EQUIPMENT Soil Compactors 825K (72K lbs) $2,000 85K (50K lbs) $5,000 85F (46K lbs) $4,500 Vibratory Soil Compactors CP34 (48 PAD Drum) $ 4,800 CP44 (66 PAD Drum) $ 5,700 CS44 (66 Drum) $ 5,00 CS44 (CP KIT 66 Drum) $ 5,700 CS56B (84 Drum) $ 6,800 CS56B (CP KIT 84 Drum) $ 7,300 CS64 (84 Drum) $ 6,800 CS64 (CP KIT 84 Drum) $ 7,500 CS68B (84 Drum) $ 7,000 CS68B (CP KIT 84 Drum) $ 7,700 *Tire wear charged. Asphalt Compactors CB68/CB6 (84 Drum) $ 7,700 CB66B/CB5 (84 Drum) $ 7,300 CB64 (84 Drum) $ 7,300 CB3 (79 Drum) $ 6,300 CB534XW/CB54 (79 Drum) $ 6,275 CB7 (59 Drum) $ 5,500 CB44 (55 Drum) $ 5,200 CB34 (5 Drum) $ 3,400 CB32 (5 Drum) $ 3,200 CB24 (48 Drum) $ 2,600 CB22 (39 Drum) $ 2,400 CB4 (35 Drum) $ 2,300 CCS9 (84 Drum) $ 7,500 Pneumatic Compactors PS 360 (55k lbs, 7 Tires) $ 6,600 CW34 (59k lbs, 8 Tires) $ 6,700 CW4 (26K lbs, 9 Tires) $ 4,600 Asphault Pavers AP055 $ 25,000 (6 period commitment) AP000 $ 24,000 (6 period commitment) *Six Period rate only with management approval for all asphault pavers. Cold Planers/Reclaimers* RM500/RM500B $ 32,500 *Lessee purchases all replacement bits.

12 MAKE/MODEL WEEK MONTH TECHNOLOGY PRODUCTS Cab Kit-GPS Receiver, GLONASS, GPS, Control Box $,358 $ 4,075 Base Station Zephyr and 985 with Precise Base $ 440 $,39 Rover+TC3, SCS900 Core, Advanced Measurement $ 743 $ 2,230 Trimble Robotic Total Station, SPS930, Data Controller, Range Pole,Tripod, and SCS900, + Advanced Measurement, + Roading $,402 $ 4,205 Trimble Dual Slope Laser-Laser, Rod and Tripod $ 289 $ 866 Cross Slope-Motor Graders $ 367 $,02 Dual Sonic-Motor Graders $ 459 $,377 Dual Laser-Motor Grader $ 64 $,843 Dual GPS-Motor Grader* $,26 $ 3,782 UTS (Universal Total Station) System-Motor Graders $ 797 $ 2,390 3D Dual GPS-Track Type tractors* $,386 $ 4,58 2D Dual Laser-Track Type tractors* $ 454 $,362 Dual GPS-Hydraulic Excavators $,32 $ 3,935 CCS900 for Asphalt Compaction** CALL CALL Dual GPS Cat Grade Box $,27 $ 3,65 Single GPS Cat Grade Box $ 890 $ 2,670 Dual Laser Cat Grade Box $ 63 $,838 ATI Grade Box Single Laser $ 966 $ 2,898 Flex System for Compactor** $ 380 $,40 Flex System for Excavator + Heading Sensor*** $ 42 $,235 MISCELLANEOUS RATES Field Service $ 37.50/hour Training $ 50.00/hour Mileage $ 2.25/mile We Have Hot Swap Parts Available TECHNOLOGY SOLUTIONS RENTAL TERMS AND CONDITIONS Rates listed are for a minimum of one week or billed on a 28 day month. In all cases training is not included in the rental rate and will be billed seperately. Pricing for training will vary based on individual need and configuration. Based on availability, scheduling of installation may take up to five business days. Price does not include Tax, or installation which varies by machine. ARO ready machines can typically be installed for $,500. Contact a Technology Specialist for a quote on non- ARO machines. *Does not include GPS Base Station. GPS Base Station and Tripod may be rented seperately. **Most Cat Compactors are NOT compatible for FHWA/VEDA specification--please confirm specifications with Technology Specialist before quoting this system. ***The dual slope laser is NOT required and NOT included, but may be added as an option. FOR ADDITIONAL INFORMATION CONTACT SITECH OF WYOMING. Arik Chistensen Casper: (307) ext. 500 Mobile: (307) Joel Moen Casper: (307) ext. 500 Mobile: (307)

13 Backhoe Loaders Center Pivot Net Operating Power Weight Dig Depth Model hp kw lb kg ft-in mm 46F , '4" F , '4" F , '5" F , '3" 5260 Compact Track Loaders Net Operating Operating Ground Power Weight Capacity Pressure Model hp kw lb kg lb kg psi kpa 259D , , D , , D , , D , , D XHP 06 79, , Note: At 50% tipping load Skid Steer Loaders Net Rated Operating Operating Power Capacity Weight Model hp kw lb kg lb kg 226B Series , , D , , D , , D , , D , , D , , D XHP , , Wheel Loaders Compact Gross Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 903C , H , H , H , K , K , Multi Terrain Loaders Net Operating Operating Ground Power Weight Capacity Pressure Model hp kw lb kg lb kg psi kpa 247B Series , , D , , D , , D , , D , , D XHP , , Small Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 924K , K , K , Note: Net power is based on ISO 9249 Note: At 50% tipping load 3

14 Medium Wheel Loaders Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 950M , M , M , M XE, , M , M XE, , M , M , Meets U.S. EPA Tier 4 Final emission standards 2 With Cat continuously variable transmission Note: Net power is based on SAE J349. Waste/Scrap Handling Arrangements Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 950M WHA , M WHA , M WHA , M XE WHA , M WHA , M XE WHA , M WHA , Note: Net power is based on SAE J349. Cat engine with ACERT Technology meets Tier 4 Final emission standards. Large Wheel Loaders Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 986H , K , K , K , K , H, , Note: Meets Tier 4 Final emission standards Block Handler Arrangements Net Operating Lift Capacity Power Weight (Ground Level) Model hp kw lb kg lb kg 986H Block , , K Block , , H Block , , Meets Tier 4 Final emission standards Note: CEN EN firm and level ground 80% FTSTL Cat engine with ACERT Technology meets Tier 4 Interim emission standards. Steel Mill Arrangements Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 972K , K , K , K , Meets Tier 4 Final emission standards Note: Cat engine with ACERT Technology meets Tier 4 Final emission standards. Telehandlers Operating Rated Lift Power Weight Capacity Height Model hp kw lb kg lb kg ft-in m TH255C 74 55, , '4" 5.6 TL642C , , '0" 2.8 TL943C , , '0" 3. TL055C , , '" 6.8 TL255C , , '3" 6.6 TH406C 24/ 92.6/ 7, , '0" TH407C 24/ 92.6/ 7, , '0" TH54C , , '9" 3.7 Cat engine with ACERT Technology meets Tier 4 Interim emission standards. 4

15 Track Drills Draglines Hole Hole Rock Diameter Depth Compressor Drill Model in mm ft m ft 3 /min m 3 /min hp kw MD MD5050 T MD / 9/ 3 23 MD / 9/ 3 23 MD550C / 28/ 40 / 30 / Rated Approx. Bucket Boom Suspension Working Capacity Length Load Weight Model yd 3 m 3 ft m lb kg mil. lb mil. kg , , , , , , Optional Rock Drill upgrade Rotary Drills Bit Load Hole Hole Depth up to Diameter Single-Pass Working Weight Model lb kg in mm ft m lb kg MD , , MD , , MD , , MD6420B 3 92, , MD , , MD , , Multi-Pass Hole Depth up to 82 ft (55.5 m) 2 Multi-Pass Hole Depth up to 73 ft (52.7 m) 3 Multi-Pass Hole Depth up to 244 ft (74.4 m) 4 Multi-Pass Hole Depth up to 278 ft (84.7 m) 5 Multi-Pass Hole Depth up to 40 ft (42.6 m) Electric Rope Shovels Dipper Haul Trucks Payload Capacity 3-Pass Load 4-Pass Load Model tons tonnes yd 3 m 3 tons tonnes tons tonnes HD HF Hydraulic Shovels Engine Operating Bucket Capacity Output Weight (Heaped 2:) Model hp kw tons tonnes yd 3 m 3 Front Shovel Configurations 605 FS FS, FS, FS 2, FS 2, FS 3, FS 4, , Engine Operating Bucket Capacity Output Weight (Heaped :) Model hp kw tons tonnes yd 3 m 3 Backhoe Configurations , B, , , , ,

16 Hydraulic Excavators Mass Excavators Mini Net Operating Max Power Weight Reach/Depth Model hp kw lb kg ft-in mm 300.9D , '"/5'8" 3028/ C , '2"/7'4" 3650/ D , '2"/7'3" 3700/ D CR , '7"/7'7" 3842/ D , '2"/7'" 4020/ D CR , '8"/8'4" 448/ E CR , '3"/9'0" 480/ E2 CR , '7"/9'5" 5060/ E2 CR , '2"/0'4" 5220/ E2 CR , '4"/0'9" 5600/ E2 CR , '0"/'5" 5790/ E2 CR SB , '9"/3'7" 6820/450 Net Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 336F L ME , F L ME , F L ME , F L ME , Note: Meets Tier 4 Final emission standards Super Long Reach Excavation Operating Max Net Power Weight Reach/Depth Model hp kw lb kg ft-in m 323F L SLR , '7"/38'4" 5.7/.6 326F L SLR , '6"/48'4" 8.4/ F L SLR , '5''/48'5" 8.4/4.7 Note: Meets Tier 4 Final emission standards Net Operating Max Power Weight Reach/Depth Model hp kw lb kg ft-in m 3F LRR , '7"/8'4" 8./5.5 32E L , '3"/9'0" 8.6/6.0 34E LCR , '6"/9'6" 8.7/5.9 36E L , '5"/2'7" 9.2/6.6 38E L , '5"/2'7" 9.2/ E LRR , '4"/22'" 9.8/6.7 32D LCR , '"/22'0" 9.7/ F L , '4"/22'" 9.8/ F L , '2"/22'4" 0./ F L , '0"/23'9" 0.6/ F LCR , '"/22'" 0.6/ F L , '5"/26'0".7/8. 336E LH , '5"/26'0".7/8. Hybrid 349F L , '6"/29'4" 2.9/ F L , '8"/3'7" 4.2/ F L , '7"/39'9" 7.2/.8 Wheel Hydraulic Max Max Net Power Operating Weight Reach/Depth Model hp kw lb kg ft-in m M33D , '3"/8'" 9.2/5.75 M35D , '4"/9'4" 9.56/5.90 M38F , '5"/9'8" 9.58/5.99 M320F 2, , '"/20'9" 9.75/6.33 M322D, , '4"/2'" 0.49/6.68 Meets Tier 3 equivalent emission standards 2 Meets Tier 4 Final emission standards 3 Material Handler versions of the M320F (MH3022) and M322D (M322D MH) are available Note: Maximum digging depth with longest boom/stick options Note: Net power is based on ISO 9249 All engine horsepower (hp) are metric Meets Tier 4 Interim emission standards 2 Meets Tier 4 Final emission standards 6

17 Track Material Handlers Net Operating Max Power Weight Reach/Height Model hp kw lb kg ft-in m 385C MH , '6"/53'3" 7.2/ C MH , '6"/74'0" 2.8/22.6 Wheel Material Handlers Max Net Operating Max Power Weight Reach/Height Model hp kw lb kg ft-in m M33D 4 Ind , '0"/28'0" 7.9/8.5 M35D 4 Ind , '6"/29'5" 8.37/8.97 M38F 5 Ind, , '6"/29'5" 8.37/8.97 M320F 5 Ind, , '0"/28'3" 8.5/8.6 MH , '"/39'7".0/2.06 M322D MH , '0"/43'8" 2.48/3.3 M325D MH 4, , '3"/52'6" 4.4/6.0 M325D MH 2,4, , '7"/5'0" 4.8/5.5 M325D L MH 4, , '0"/56'9" 5.5/7.3 M325D L MH 2,4, , '0"/54'6" 5.8/6.6 MH , '0"/58'0" 5.9/7.7 MH , '5"/64'0" 7.8/9.5 MH , '5"/70'5" 9.3/2.5 Industrial Stick 2 Barge boom ft (9.9 m) 3 Available mid Meets Tier 3 equivalent emission standards 5 Meets Tier 4 Final emission standards 6 Reach/Height based on Stick Length: 8.7 ft (5.7 m) 7 Reach/Height based on Stick Length: 23.3 ft (7. m) Note: Net power is based on ISO 9249 All engine horsepower (hp) are metric Waste Handler Max Net Operating Max Power Weight Reach/Height Model hp kw lb kg ft-in m MH3022 WH , '9''/36'2" 9.99/.02 Meets Tier 4 Final emission standards Note: Net power is based on ISO 9249 All engine horsepower (hp) are metric Track Loaders Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 953D , D , D , Note: Includes GP bucket plus long bolt-on teeth and segments Waste Handler Operating Bucket Power Weight Capacity Model hp kw lb kg yd 3 m 3 953D WH , D WH , D WH , Note: Includes GP Landfill bucket with bottom cutting edge Track-Type Tractors Operating Power Weight Model hp kw lb kg Blade D3K2 XL, , VPAT D3K2 LGP, , VPAT D4K2 XL, , VPAT D4K2 LGP, , VPAT D5K2 XL, , VPAT D5K2 LGP, , VPAT D6K2 XL/LGP, , VPAT 30, D6N XL/LGP, , SU, VPAT 39, D6T XL/XW/LGP, , S, SU, A, 53, VPAT D7E STD/LGP, , S, SU, U, A 62, D8T STD/LGP , SU, U, A 86, D9T 3, , SU, U D0T2 3,4, , SU, U DT 3, , SU, U DT Carrydozer 3, , CD Available with MS ripper 2 Meets Tier 4 Interim emission standards 3 Meets Tier 4 Final emission standards 4 Available with MS ripper, SS ripper, counterweight 5 Power Management: Reverse 722 hp/538 kw Note: Winch available for D3K to D0T2 7

18 Track-Type Tractors Waste Handlers Operating Power Weight Model hp kw lb kg Blade D6N WH XL/LGP , SU-XL, 43, VPAT D6T WH XL/XW/LGP , S, SU, A, 59, VPAT D7E WH LGP , S D8T WH STD/LGP , SU, U 9, D9T WH , SU, U Meets Tier 4 Interim emission standards 2 Meets Tier 4 Final emission standards Landfill Compactors Gross Operating Blade Width Power Weight Over End Bits Model hp kw lb kg ft-in mm 86F , '0" K , '9" K , '0" 593 Soil Compactors Net Operating Blade Width Power Weight Over End Bits Model hp kw lb kg ft-in mm 85F , '4" K , '2" 4628 Meets Tier 3 equivalent emission standards 2 Meets Tier 4 Final emission standards Wheel Dozers Net Operating Blade Power Weight Width Model hp kw lb kg ft-in mm 84F , '8" K , '9" K , '8" K , '4" K , '8" 632 Meets Tier 3 equivalent emission standards 2 Meets Tier 4 Final emission standards 3 Serial Number Prefix 880 (meets Tier 4 Final emission standards) and ZMX (meets Tier 2 equivalent emission standards) Meets Tier 3 equivalent emission standards 2 Meets Tier 4 Final emission standards Wheel Dozer Scoops Net Operating Scoop Power Weight Capacity Model hp kw lb kg yd 3 m 3 834K Coal , K Chip ,

19 Motor Graders M Series Operating Maximum Weight Net Power with Typically Standard Base Power Optional VHP+ Equipped Blade Length Model hp kw hp kw lb kg ft m 40M , M , AWD 60M , M , AWD 4M , M , M , M Series 3 Operating Maximum Weight Power with Typically Standard Base Power VHP+ Equipped Blade Length Model hp kw hp kw lb kg ft m 2M , M , AWD 40M , M , AWD 60M , M , AWD Note: Meets Tier 4 Final emission standards Available in Canada 2 Ripper is standard on 24M and is included in the operating weight M Series 2 Operating Maximum Weight Power with Typically Standard Base Power VHP+ Equipped Blade Length Model hp kw hp kw lb kg ft m 20M , M , AWD Note: Meets Tier 4 Interim emission standards Wheel Tractor- Scrapers Capacity Power Rated Load Model hp kw yd 3 m 3 ton tonne 62K K K (T) (S) G 462/ / G (T) 462/ / (S) 266/283 98/2 637G (T) 462/ / (Coal Bowl) (S) 266/283 98/2 657G (T) 564/600 42/ (S) 40/45 306/ G (T) 564/600 42/ (Coal Bowl) (S) 40/45 306/337 9

20 Articulated Trucks Net Power Operating Weight Body (ISO 4396) Empty Capacity Model hp kw lb kg tons m/ton 725C , C , C EJ , C , C EJ , C , Note: All models meet Tier 4 Final emission standards Off-Highway Trucks Gross Nominal Power Capacity Top Speed Model hp kw tons m/ton mph km/h 770G G G G G, Note: The 770G, 772G, 773G, 775G and 777G are available as Tier 4 Final or Tier 2 Equivalent. Cat Articulated Truck Bare Chassis for Specialty Applications Water Tank Size Rated Load Empty Loaded (Approx) Model tons m/ton tons m/ton tons m/ton gal L Standard Wheel Base With Hoist 725C , C , B , B , Long Wheel Base With Hoist 725C , C , B , B , Meets Tier 4 Interim emission standards 2 Meets Tier 4 Final emission standards Note: Water tank sizes listed are estimated based on typical OEM tanks currently available. Please refer to specific OEM for additional information. Rated Load Rated payload including OEM additions Empty Operating weight of bare chassis machine, excluding options Loaded Weight of the fully loaded machine, excluding options B Series HRC weights shown Note: Bare Chassis applications could include: Water, Service (Fuel & Lube), High Capacity Body (Waste, Coal, etc.), Open Body (Log, Pipe, etc.), Container Carrier, Hook Lift, Tow, Cable Reel, etc. Bare Chassis are available with or without hoist. On-Highway Trucks 700 rpm Maximum GVWR Model hp kw Chassis BBC lb kg CT660 SBA , , 22 79, , , 22 75, Cat OHT Truck Bare Chassis for Specialty Applications Gross Power Water Tank Size Model hp kw gal L Off-Highway 770G WTR , G WTR , G WTR , G WTR , G WTR, , Mining 785D WTR, , F WTR 2, , Mining Trucks Nominal Gross Power Capacity Top Speed Model hp kw tons m/ton mph km/h 785D, D,900-2, F 2,270-2, F AC 2,300-2, F AC 3,000-3, F 3,550-4, MT5300D AC 2,750-3,

21 Off-Highway and Mining Truck Bodies Flat Floor Body Dual Slope Body Quarry Body X Body MSD II Body Gateless Coal Body Combination Body 770G 772G 773G 775G 777G 785C 785D 789D 793D 793F 795F 797F MT5300D AC HE Body Available Not Available Highwall Mining System HW300 Weight 495,665 lb ( kg) Mine Mode Dimensions Width 38.5 ft (.7 m) Height 28.7 ft (8.7 m) Length 66.5 ft (20.3 m) Maximum Penetration Capability,000 ft (305 m) Cutter Module Options and Minimum Recommended Seam Heights Low Profile Cutter Module 30 in (762 mm) Extra Low Profile Cutter Module 28 in (7 mm) Mid-Seam Cutter Module 47.2 in (200 mm) High-Seam Cutter Module 94.5 in (2400 mm) Longwall Mining Equipment Roof Support Systems (custom-made) Shield Center Height Density Type (examples) in mm in m ton/ft 2 kn/m 2 RHH Plow Shield up to up to GH Plow Shield 59/ 500/ up to up to Shearer (low) 68.9/ 750/ up to up to Shearer (high) 68.9/ 750/ up to up to LTCC 68.9/ 750/ up to up to Shearers Installed Power Minimum Seam Range hp kw Pan Width Model in m (@ 60 Hz) (@ 50 Hz) in mm EL up to up to , EL up to up to , EL up to up to ,

22 Longwall Mining Equipment Automated Plow Systems Typical Cutting Height Installed Power Model in m hp kw RHH GH GH800B GH , AFC Line Pans Dogbone Top Plate Width Outside Breaking Force Thickness Average Model in mm lbf kn in mm t/h PF , PF / 932/ 809, / 40.62/ 032/ 2500/ PF5 4.02/ 042/,0, / 44.96/ 42/ 3500/ PF6 4.02/ 042/,0, / 44.96/ 42/ / PF ,0, Beam Stage Loaders (BSL) Width Outside Top Plate Thickness Dogbone Breaking Force Production Average per Year in mm in mm lbf kn tons tonnes BSL Line Pans PF / 44.56/ PF / 60.7/ PF / 60.7/ / 32/ / 542/ / 542/ , ,204/ 4,89/ 6, ,0, ,063/ 6,834/ 7, ,0, ,063/ 6,834/ 7, / 3800/ / 6200/ / 6200/ 7000 Beam Stage Loaders (BSL) Feed Size Roll Diameter Maximum Installed Power V-Belt/Gearbox Throughput in mm in mm hp kw tons/h tonnes/h BSL Crusher SK X X SK X X SK X X SK X X SK X X / / / ,006/, ,006/,006 32/ / / / / 750, , , , , Widths Installed Power Stroke Capacity in mm hp kw in mm tons/h tonnes/h Tensionable Drive Frames SPR / 43.3/ 5.8/ / 00/ 300/ 500 up to 536 up to , SPR5 43.3/ 5.8/ 59.07/ / 300/ 500/ 700 up to 67 up to , Maximum Installed Power Maximum Output Torque Input Speed (motor speed) hp kw lb-ft N m rpm BSL Gearboxes Cat K-0 up to 326 up to , Cat KP-25/30 up to 86 up to , Boot End Skid-Mounted Boot End (SMB) Crawler-Mounted Boot End (CMB) Belt Width Advancing Overlap Recommendation in mm Mechanism in mm 39.37/ 47.24/ 55.2/ / 200/ 400/ 600 Skid Crawler

23 Longwall Mining Equipment CST Drives Maximum Output Torque (for a short Installed Power duration of 3 sec) Model hp kw lb-ft N m Primary Use 30 up to up to 22, AFC up to up to 33, AFC, M up to up to 33, AFC/Plow, V up to up to 33, AFC, up to up to 479, AFC, up to up to 848, AFC 2, Room and Pillar Mining Equipment Continuous Miners Load Rate up to 0 to Max Cut tons/ tonnes/ Total Power Weight Model in mm min min hp kw tons tonnes CM CM CM CM CM CM345 N CM Variable Frequency Drives Model Rated Power hp kw Input Voltage Maximum Operational Torque Operation VFD-A800/W800, ,300V ± 0% 20% 4Q VFD-A200/W200, ,300V ± 0% 20% 4Q Face Haulers Operating Payload Height Capacity Power Model in mm tons tonnes Type FH Battery Note: To operating height indicated and above Converter: Current Source Inverter (CSI) Setup: VFD separate from motor Programmable Mining Controls (PMC) Model Function Protection Rating PMC-R Roof Support Control IP68 PMC-D AFC/Plow Control IP68 PMC-V Visualization and Parameter Setup IP68 PMC-P Interface Provider MCU2 Visualization and Control Unit IP65 Continuous Haulage Systems Operating Conveyor Height Width Capacity Model in m in mm tons/min tonnes/min FH Roof Support Carriers Operating Height Capacity Power Model in mm tons tonnes Type SH Battery SH Battery SH650 VFD Battery SH Battery 3

24 Room and Pillar Mining Equipment Scoops Operating Height Capacity Power Model in mm tons tonnes Type SU488 L Battery SU Battery SU488 D Diesel Note: To operating height indicated and above SU488 has AC power option Underground Loaders Gross Payload Body Power Capacity Capacity Model hp kw tons tonnes yd 3 m 3 R300G 65 5,8 23 5, R600H 269 3, , , ,6 R700G 353 3, , ,4,5 242,4, ,4, ,4,5 R2900G 409 3, , , ,5 R3000H 398 3, , , ,6 st-3rd gear 2 4th gear 3 Ventilation reduction 4 Meets Tier 3 equivalent emission standards 5 SAE J995 6 ISO Tramming only 8 Meets Tier equivalent emission standards Note: R700G rated at 3.4 tons (2.5 tonnes) for truck loading Feeder Breakers Operating Conveyor Height Width Max Capacity Model in mm in mm tons/h tonnes/h FB , Note: To operating height indicated and above Rock Flow System Continuous Hard Rock Haulage System Rock Feeder Dimensions Performance (L W H) Weight Total Model tons/h tonnes/h ft mm tons/h tonnes/h RF Hard Rock Mining Equipment Underground Trucks Gross Payload Body Power Capacity Capacity Model hp kw tons tonnes yd 3 m 3 AD , , , ,5 AD45B 587 3, , , ,5 AD60 75,3,5 560,3, ,3, ,3,5 Rock Mover Performance Drive Power Chain Speed Model tons/h tonnes/h hp kw ft/min m/sec RM st gear 2 2nd-7th gear 3 Ventilation reduction 4 Meets Tier 3 equivalent emission standards 5 SAE J995 4

25 Conveyor Systems Inline Idlers Ratings Roll Diameter Roll Design Belt Width CEMA B, C, D, E, F CEMA B; 4 and 5 in (0 and 27 mm) CEMA C; 4, 5 and 6 in (0, 27, 52 mm) CEMA D; 5 and 6 in (27 and 53 mm) CEMA E; 6 and 7 in (52 and 77 mm) CEMA F; 7 and 8 in (77 and 203 mm) Steel, EXALON (HMWPE), Impact, Rubber Disc, Urethane Disc 8-84 in ( mm) Belt Terminal Groups Drive Belt Width in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Right Angle Alignment Free Parallel Shaft Drive Skid Offset Idlers Ratings Roll Diameter Roll Design Belt Width Configuration Pulleys Design Type Pulley Specifications Belt Width Lagging Type CEMA B, C, D, E, F CEMA B; 4 and 5 in (0 and 27 mm) CEMA C; 4, 5 and 6 in (0, 27, 52 mm) CEMA D; 5 and 6 in (27 and 53 mm) CEMA E; 6 and 7 in (52 and 77 mm) CEMA F; 7 and 8 in (77 and 203 mm) Steel, EXALON (HMWPE), Impact, Rubber Disc, Urethane Disc 8-84 in ( mm) Floor Mounted, Roof Hung, Wire Rope, Catenary Engineered Class (T-Bottom and Turbo Disc) Compression Style Wing Spiral Live Shaft Dead Shaft (Static Shaft) Designed to meet specific tension requirements for any conveyor system 8-60 in ( mm) Rubber lagging plain or diamond grooved, ceramic, and steel spiral. Straight or crowned face. Discharge Belt Width 8-84 in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Remote A-Frame Roof Mounted Drive/Discharge Belt Width 8-84 in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Adjustable Boom Fixed Boom Head Driven Pulley Drive/Discharge/Take-Up (Combo Drive) Belt Width in ( mm) Performance Capabilities Belt Speed up to 700 ft/min (3.56 m/sec) Tonnage Rate up to 2,400 tons/hr (277 tonnes/hr) Design Types Adjustable Boom Fixed Boom Intermediate Loading Belt Width in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types In-Line 90 Degrees 5

26 Belt Terminal Groups Storage Unit Belt Width in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Electric Winch Pipelayers Operating Lifting Power Weight Capacity Model hp kw lb kg lb kg PL , , PL , , PL , , Tail Section Belt Width 8-84 in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Loading A-Frame Take-Up Belt Width 8-84 in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Electric Winch Screw Hydraulic Cylinder Gravity Forest Machines Operating Power Weight Max Reach Model hp kw lb kg ft m 320D FM , D FM , D FM , , Meets Tier 4 Interim emission standards Note: Weight without tool and with Under/Under log loader front Skidders Tripper Discharge Belt Width in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Remote A-Frame Wheel Skidders Gross Operating Grapple Power Weight Wheelbase Capacity Model hp kw lb kg in mm ft 2 m 2 525D , D , D , D , Note: Available as Cable (except 555D), Single Arch (525D and 535D only) and Dual Arch Arrangements Tripper Drive Belt Width in ( mm) Performance Capabilities Belt Speed up to,000 ft/min (5.08 m/sec) Tonnage Rate up to 0,000 tons/hr (9072 tonnes/hr) Design Types Right Angle Alignment Free Parallel Shaft Drive Skid 6

27 Wheel Loaders Forestry Arrangements Net Operating Full Turn Static Tipping Load Power Weight Grapple Fork (Level) Model hp kw lb kg lb kg 950M , , M , , M , , M XE , , M , , Note: Cat engine with ACERT Technology meets Tier 4 Final emission standards. Net Full Turn Static Tipping Load Power Weight Grapple Fork (Level) Model hp kw lb kg lb kg 988K , , H , , Forwarders Gross Load Max Loader Operating Power Capacity Reach Weight Model hp kw lb kg ft m lb kg 564 (6-wheel) , , (8-wheel) , , (6-wheel) , , HD (8-wheel) , , Available in Canada only Harvesters Feller Bunchers Track Zero Tail Swing Gross Tractive Max Reach Operating Weight Power Effort (with Head) (w/o Head) Model hp kw lbf kn ft m lb kg 52B , , B , , Track Zero Tail Swing Gross Tractive Max Reach Operating Weight Power Effort (with Head) (w/o Head) Model hp kw lbf kn ft m lb kg 50HD , , B , , B , , Track Full Tail Swing Gross Tractive Max Reach Operating Weight Power Effort (with Head) (w/o Head) Model hp kw lbf kn ft m lb kg 54 Series , , Series , , Track Full Tail Swing Gross Tractive Max Reach Operating Weight Power Effort (with Head) (w/o Head) Model hp kw lbf kn ft m lb kg 54 Series , , Series , , Wheel Feller Bunchers Gross Power Wheelbase Weight Model Engine hp kw in mm lb kg 553C C6.6 ACERT , C C7. ACERT , C C7. ACERT , Meets Tier 4 Interim emission standards Note: Gross Power ISO 4396 Weight with 28L 26 tires, less attachment 7

28 Knuckleboom Loaders Stationary Mount Gross Max Operating Max Lift Power Reach Weight Capacity Model hp kw ft m lb kg lb kg 59 SM , , SM/EHC , , SM , , SM/EHC , , Note: Maximum Lift Capacity with Standard Boom Optional booms available Cold Planers Gross Operating Cutting Width Max Working Power Weight Standard Depth Model hp kw lb kg in mm in mm PM , PM m , PM m , The PM02 is also available with a wheeled undercarriage Reclaimers/ Stabilizers Trailer or Truck Mounted Gross Max Operating Max Lift Power Reach Weight Capacity Model hp kw ft m lb kg lb kg , , C , , , , C , , Gross Operating Cutting Width Max Working Power Weight Standard Depth Model hp kw lb kg in mm in mm RM , RM500B , Note: Weight with ROPS, cab and Universal rotor. RM300 and RM500B can be outfitted with optional rotors for various applications and conditions. RM300 and RM500B are capable of both full depth reclamation (Max working depth 6"/406 mm) or soil stabilization depending on rotor configuration. Note: Maximum Lift Capacity with Standard Boom Optional booms available Site Prep Tractors Gross Power Attachment Flow and Pressure Weight Model Engine hp kw psi bar lb kg 586C C9.3 ACERT , Note: Weight includes Quick Coupler, Retrieval Assist Winch with Cable, and Full Fluids Meets Tier 4 Interim emission standards 38, Single Drum Soil Compactors Gross Operating Drum Power Weight Width Model hp kw lb kg in mm CS , CP , CS54B , CP54B , CS56B , CP56B , CS68B , CP68B , CS74B , CP74B , CS78B , Note: Weights with ROPS/FOPS cab 8

29 Pneumatic Tired Compactors Gross Operating Rolling Power Weight Width Model hp kw lb kg in mm CW , CW , Tandem Vibratory Rollers Gross Operating Drum Power Weight Width Model hp kw lb kg in mm CB4B , CB4B , CB22B , CB24B , CB24B XT , CB32B , CC24B , CB34B , CB34B XW , CC34B , CB54 XW , CB , CB44B Solid Drum , CB44B Split Drum , CB54B Solid Drum , CB54B Split Drum , CD44B Solid Drum , CD44B Split Drum , CD54B Solid Drum , CD54B Split Drum , Asphalt Paving Equipment Gross Operating Standard Power Tractor Weight Paving Width Model hp kw lb kg ft-in m AP255E , '7".4 AP500E , '0" 2.4 AP555E , '0" 2.4 AP600D , '0" 2.4 AP655D (Mobil-trac ) , '0" 2.4 (Steel Track) , '0" 2.4 AP000F , '0" 3.0 AP055F , '0" 3.0 Weight includes screed Screeds Standard Max Min Paving Range Paving Width Paving Width Model ft-in m ft-in m ft-in m AS343 4'7"-8'6" '" 3.4 '8" 0.5 AS325C (Electric) 8'0"-5'6" '2" 6. 6'0".8 Vibratory AS4252C (Electric) 8'4"-6'4" '4" 8.0 8'4" 2.55 Vibratory and Tamper Bar SE60 V 9'0"-9'6" '0" '0" 3.0 SE60 V XW 9'0"-9'6" '0" 0.0 9'0" 3.0 SE60 VT XW 9'0"-9'6" '0" 0.0 9'0" 3.0 Operating weight with ballast: 7,07 lb (3208 kg) 2 Operating weight with ballast: 9,036 lb (4099 kg) 3 Operating weight with ballast: 9,267 lb (4203 kg) 9

30 Electric Power Generator Set Packages 50 Hz Diesel Ratings kva C C C C C3 ACERT C5 ACERT C8 ACERT Generator Set Packages 60 Hz Diesel Ratings ekw C C C C C C C9 ACERT kva 342C C32 ACERT C ekw 3406C C3 ACERT C5 ACERT C8 ACERT kva CM CM CM CM ekw 342C C27 ACERT C32 ACERT C ekw CM CM CM CM

31 Electric Power Generator Set Packages 50 Hz Continuous Gas Ratings ekw Natural Gas Biogas 500 rpm 000 rpm 750 rpm 500 rpm 000 rpm G G G CG G CG G G CG G6CM G20CM Hz Standby Gas Ratings ekw 800 rpm G G G Rental Generator Sets Rental Generator Sets XQ 60 Hz XQ 50/60 Hz XG 60 Hz XG 50/60 Hz Electrical Systems (50 Hz) Rating ekw 375 ekw ekw 475 ekw Uninterruptible Power Supply (UPS) 400 V Flywheel Stand Alone System (SMS and MMS) 250 kva 000 kva Flywheel Parallel System 250 kva 7000 kva Double Conversion Stand Alone System 60 kva 500 kva Double Conversion Parallel System 60 kva 2000 kva 60 Hz Continuous Gas Ratings ekw Natural Gas Biogas rpm rpm rpm rpm rpm rpm rpm rpm rpm G G G G CG G CG G G CG G6CM G20CM Paralleling Switchgear Fully Customizable Modularization Capable Breaker Based 220V to 38 kv Human Machine Interface (HMI) Controls Typical Applications: Emergency Standby Utility Paralleling Load Management 2

32 Electrical Systems (50 Hz) Multi-Generator Paralleling Controls Engine Paralleling and Integration Control Integration Controls Generator Set Paralleling Controls (External Circuit Breaker) On-Package Genset Paralleling Controls Human Machine Interface (HMI) Controls Field Expandable Typical Applications: Emergency Standby Utility Paralleling Load Management Electrical Systems (60 Hz) Uninterruptible Power Supply (UPS) 480 V Flywheel Stand Alone System (SMS and MMS) 300 kva 200 kva Flywheel Parallel System 300 kva 8400 kva Double Conversion Stand Alone System 40 kva 225 kva Double Conversion Parallel System 40 kva 800 kva Automatic Transfer Switch (ATS) Contactor Based UL-ANSI Type 600 V Class 40 A 4000 A Open Transition Closed Transition Delayed Transition Bypass Isolation Paralleling Switchgear Fully Customizable Modularization Capable Breaker Based 220V to 38 kv Human Machine Interface (HMI) Controls Typical Applications: Emergency Standby Utility Paralleling Load Management Breaker Based UL-ANSI Type 600 V Class 30 A 5000 A Open Transition Closed Transition Delayed Transition Bypass Isolation Single-Generator Paralleling Controls Engine Transfer Load Manager Integration Controls Generator Set Paralleling Controls (External Circuit Breaker) Human Machine Interface (HMI) Controls Typical Applications: Emergency Standby Utility Paralleling Load Management 22

33 Electrical Systems (60 Hz) Multi-Generator Paralleling Controls Engine Paralleling and Integration Control Integration Controls Generator Set Paralleling Controls (External Circuit Breaker) Centralized Off-Package Paralleling Controls On Package Genset Paralleling Controls Human Machine Interface (HMI) Controls Field Expandable Typical Applications: Emergency Standby Utility Paralleling Load Management Industrial Power Systems Diesel hp kw C C C C C C C C3.4B C C4.4 ACERT Automatic Transfer Switch (ATS) Contactor Based 600 V Class 40 A 4000 A Open Transition Closed Transition Delayed Transition Bypass Isolation hp kw C6.6 ACERT C7 ACERT C7. ACERT C C9 ACERT C9.3 ACERT C ACERT C3 ACERT C5 ACERT Breaker Based 600 V Class 00 A 5000 A Open Transition Closed Transition Delayed Transition Bypass Isolation hp kw 3406C C8 ACERT C27 ACERT C32 ACERT Family Family Includes ratings for both highly regulated and lesser or non-regulated territories, unless noted otherwise. 2 For use in lesser regulated territories 3 For use in highly regulated territories 23

34 Industrial Power Systems Gas hp kw G3300 Family G3400 Family G3500 Family G3600 Family G2CM Includes ratings for both highly regulated and lesser or non-regulated territories, unless noted otherwise. Oil and Gas Products Engines Diesel bhp bkw C Series Family Family CM20C Family CM25C Family CM32C Family CM43C Family Fire Pump hp kw C8 ACERT C C Engines Dual Fuel bhp bkw 3500 DGB Family CM34DF Family CM46DF Family For use in lesser regulated territories Engines Gas bhp bkw G3300 Family G3400 Family CG37 Family G3500 Family G3600 Family GCM34 Family

35 Oil and Gas Products Land Generator Sets Diesel kva ekw C Series Family Family C75 Family Family CM20C Family CM25C Family CM32C Family CM43C Family Land Electric Drive Drilling Engines bhp bkw 3500 Family Land Electric Drive Drilling Modules kva ekw 3500 Family Land Generator Sets Dual Fuel kva ekw 3500 DGB Family CM34DF Family CM46DF Family Offshore Generator Sets kva ekw 3500 Family C75 Family C280 Family CM20C Family CM25C Family CM32C Family CM34DF Family CM43C Family CM46DF Family Land Generator Sets Gas kva ekw G3300 Family 38 0 G3400 Family CG70 Family G3500 Family G3600 Family GCM34 Family Fire Pump Engines bhp bkw C7 ACERT Family C5 ACERT C8 ACERT C32 ACERT Family

36 Oil and Gas Products HazPak bhp bkw C C C C C C C Transmissions Power Torque Weight bhp bkw lb-ft Nm lb kg CX3-P , CX35-P , TH48-E , , TH48-E , , CX48-P , , TH55-E , , TH55-E , , Well Service Pumps Power Weight Gear bhp bkw lb kg Ratio WS , : WS , : WS , : WS273 XD , : WS305 XD , : Petroleum Transmissions Power Input Torque Weight Gear Transmission hp kw lb-ft N m lb kg Ratios TH3-E , Straight Through: 4.40, 2.33,, ,.00, Dropbox 2WD: 0.72, 0.6, 2, Dropbox 4WD: 2, TH35-E , Straight Through: 5.73, 3.57, 2, ,.95, Dropbox 2WD:.43,.00, 2, , 0.63, Dropbox 4WD: , CX3-P , Side PTO: 4.40, 2.33, ,.00, Side PTO 0.72, 0.6, with retarder: 3.97, Integral Pump Drive (IPD):,0 499 IPD with retarder:, Dropbox 2WD:, Dropbox 4WD:, CX35-P , Side PTO: 5.73, 3.57,, ,.95, IPD:.43,.00,, , 0.63, 4.46 CX48-P , , , 2.45, 2.20,.8,.62,.36,.9, 0.99 TH48-E , , , 4.52, 3.33, 2.47,.82,.36,.00 TH48-E , , , 2.45, 2.20,.8,.62,.36,.9, 0.99 TH55-E , , , 4.59, 3.38, 2.48,.83,.36,.00 TH55-E , , , 3.43, 3.03, 2.53, 2.22,.85,.64,.36,.00 WS , WS , : Warm-Up Mode Option: Provides torque converter stall for aiding power train warming during cold starts 8F is unavailable on TH48-E80 units configured with the warm-up mode option. 2 Input torque limited to 2,400 lb-ft (3254 N m) in gears F-3F 26

37 WYOMING MACHINERY COMPANY IS HERE TO HELP. Call our main office at (307) or any of our listed representatives for rental availability, new and used equipment sales or equipment service. PRODUCT SUPPORT SALES Mike Hilton Product Support Sales Rock Springs: (307) Mobile (307) Jason Bernatis Product Support Sales Rock Springs: (307) Mobile: (307) INSIDE PRODUCT SUPPORT SALES James Sheets Product Support Sales Cheyenne: (307) Mobile: (307) Stacey Anderson Power Systems Inside Sales Casper: (307) Mobile: (307) Aaron Thompson Inside Sales Rep. Office: (307) Mobile: (307) EXPANDED MINING PARTS MANAGER MINING PRODUCT SUPPORT SALES Kelly Patten Product Support Sales Gillette: (307) Mobile: (307) EXPANDED MINING GET SPECIALIST Brad Maycock Product Support Sales Gillette: (307) Mobile: (307) Justin Kolata Product Support Sales Gillette: (307) Mobile: (307) Cody Orgaard Expanded Mining GET Specialist Mobile: (307)

38 BUSINESS SOLUTIONS GET THE MOST OUT OF YOUR EQUIPMENT Even before you put a new machine into operation, you re making important decisions that affect your long term profitability. WYOMING MACHINERY COMPANY CAN HELP YOU MAKE THE RIGHT DECISIONS FROM THE START. We can provide the consultations, products, services, training and technology that help you make the right choices - at the right time - for your operation. By using our customer services, you will get more performance from your equipment and achieve maximum profitability through the Five Stages of Equipment Management: Selection, Purchase, Operation, Maintenance and Replacement. BETTER MAINTENANCE - LOWER REPAIR COSTS Wyoming Machinery Company can assist you in building a better maintenance plan including: Performing effective PMs Using Scheduled Oil Sampling Increased productivity with Cat Technology Products Scheduling inspections and repairs Selecting the best repair options Keeping accurate records Determining the manpower, training and tools required to keep your equipment operating productively with maximum profit BS SERVICES: Custom Track Service (CTS) Customer Support Agreements (CSA) Equipment Management Solutions (EMS) Setup Customer Training Fluid Analysis Lab (S O S Services) Technical Services Technology Services OUR PARTS & SERVICE SETS US APART We not only have more parts in stock for your equipment than anyone else... but, if we don t happen to have the part you need, we can get it fast... usually by the next day. Whether you need emergency repairs or regular maintenance, Wyoming Machinery Company s service department is ready to help! We have four convenient store locations and resident field service technicians located throughout the state ready to serve you.

39 208 JANUARY APRIL FEBRUARY MAY MARCH JUNE JULY OCTOBER AUGUST NOVEMBER SEPTEMBER DECEMBER JANUARY APRIL JULY OCTOBER FEBRUARY MAY AUGUST NOVEMBER MARCH JUNE SEPTEMBER DECEMBER

40 NOTES Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) w w w. w y o m i n g c a t. c o m

41 NOTES Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) w w w. w y o m i n g c a t. c o m

42 MACHINE Rentals

43 POWER SYSTEMS Rentals

44 NOTES Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) w w w. w y o m i n g c a t. c o m

45 Gas hp kw G3300 Family G3400 Family G3500 Family G3600 Family GCM On-Highway Engines hp kw C7 ACERT C9 ACERT C3 ACERT C5 ACERT WYOMING MACHINERY COMPANY & CATERPILLAR ON-LINE RESOURCES WyomingCat.com - Wyoming Machinery Company s official website; view account details, order parts, see our complete used equipment inventory, build & quote a new machine, contact your sales representative and much more. Cat.com - Cat s official company website with complete information regarding Caterpillar Inc., Cat equipment, Cat parts, services and industry resources. CatUsed.com - The Caterpillar online source for the complete list of Cat dealer supported used heavy equipment, parts, engines and attachments.. CatAuctions.com - Cat Auction Services is your one-stop for buying and selling equipment in person or online. CatAccessAccount.com - The Cat Access Account is a charge account that enables you to pay for parts, service and rentals at your Cat Dealer. Cat-OilAndGas.com - Caterpillar s complete line of diesel and gas engines and generator sets including spec sheets and application data. Cat.com/EmissionsSolutions - Emissions reduction technology can extend the life of your equipment investments, minimize downtime, and achieve compliance with current emissions requirements. Safety.Cat.com - Your source for materials dedicated to promoting the safety of everyone who works in, on, or around Caterpillar equipment. Finance.Cat.com - Make payments and access your Cat Financial account information 24/7. Cat-Lift.com - Cat Lift Trucks offers a complete range of durable lift trucks designed to handle your material handling applications. CatMSDS.Cat - Product Material Safety Data Sheet (MSDS) are provided to describe any physical and chemical hazards associated with that product. Cat-ElectricPower.com - For all your power generation demands, large or small, urban or rural, simple to complex. OHE.Cat.Com - Access SIS Web or manage your online account information including your profile and Caterpillar engine ownership information. Shop.Cat.com - Your one-stop resource for Caterpillar merchandise including hats, coats and scale models. CASPER 5300 W. Old Yellowstone Hwy. PO BOX 2335 Casper, WY GILLETTE MINING 6500 Swanson Rd. Gillette, WY CHEYENNE 789 Hutchins Dr. Cheyenne, WY ROCK SPRINGS 940 Elk Street Rock Springs, WY GILLETTE 5505 Mohan Road PO Box 238 Gillette WY,

46 PRODUCT QUICK REFERENCE ELECTRIC POWER Generator Set Packages 60 Hz Diesel Ratings Generator Set EkW Rating C C C C C9 ACERT B Non Emission C Non Emission C5 ACERT C8 ACERT C27 ACERT C32 ACERT C Family CM CM CM Hz Gas Ratings Generator Set EkW G3300 Family G3400 Family G3500 Family G3600 Family RENTAL PRODUCTS Power Modules Generator Set EkW Temperature Control Products Air Conditioners 0-90 Tons Turbines - Gas 5.2 MW Air Compressors cfm Air Cooled Chillers ton Electrical Systems Uninterruptible Power Supply 40 kva - 8,400 kva Switchgear - 220V-5 kv, 5 kv Amps - Emergency & Utility - Paralleling - Load Management Automatic Transfer Switch 600V, 40A-5,000A - Open Transition - Closed Transition - Delayed Transition - By-Pass Isolation INDUSTRIAL ENGINES Diesel hp kw C C C C C C C C C3.4B C C4.4 ACERT C6.6 ACERT C7 ACERT C7. ACERT C9 ACERT C9.3 ACERT C ACERT C3 ACERT C5 ACERT C8 ACERT C27 ACERT C32 ACERT Family Family Gas hp kw G3300 Family G3400 Family G3500 Family G3600 Family G2CM OIL AND GAS PRODUCTS Diesel hp kw C C4.4 ACERT C6.6 ACERT C6.6 ACERT C7 ACERT C9 ACERT C9.3 ACERT C ACERT C3 ACERT C5 ACERT C8 ACERT C27/C32 ACERT C7 Water Cooled/ATEX C9 Water Cooled/ATEX C32 Water Cooled/ATEX Family Family C CM CM M 20 C Family M 32 C Family M 43 C Family (cont.)

47 BUSINESS SOLUTIONS GET THE MOST OUT OF YOUR EQUIPMENT Even before you put a new machine into operation, you re making important decisions that affect your long term profitability. WYOMING MACHINERY COMPANY CAN HELP YOU MAKE THE RIGHT DECISIONS FROM THE START. We can provide the consultations, products, services, training and technology that help you make the right choices - at the right time - for your operation. By using our customer services, you will get more performance from your equipment and achieve maximum profitability through the Five Stages of Equipment Management: Selection, Purchase, Operation, Maintenance and Replacement. BETTER MAINTENANCE - LOWER REPAIR COSTS Wyoming Machinery Company can assist you in building a better maintenance plan including: Performing effective PMs Using Scheduled Oil Sampling Increased productivity with Cat Technology Products Scheduling inspections and repairs Selecting the best repair options Keeping accurate records Determining the manpower, training and tools required to keep your equipment operating productively with maximum profit BS SERVICES: Custom Track Service (CTS) Customer Support Agreements (CSA) Equipment Management Solutions (EMS) Setup Customer Training Fluid Analysis Lab (S O S Services) Technical Services Technology Services OUR PARTS & SERVICE SETS US APART We not only have more parts in stock for your equipment than anyone else... but, if we don t happen to have the part you need, we can get it fast... usually by the next day. Whether you need emergency repairs or regular maintenance, Wyoming Machinery Company s service department is ready to help! We have four convenient store locations and resident field service technicians located throughout the state ready to serve you.

48 MODEL WEEKLY PERIOD RPO PERIOD OVERTIME STANDARD RATE 4 Week RPO Light Plants NLPRO2V (8 kw) $ 250 Pumps 4 Diesel Self-Priming $ Diesel Self-Priming $ Diesel Self-Priming $ 700 Hose for Pump CALL Man Lifts *Certain Restrictions Apply* Z80/ $ 6,300 - S $ 6,300 - S $ 9,300 - Fork Lifts 36,000 lbs $ 2,233 5,500 lbs $,267 2,000 lbs $,200 8,000 lbs $ 700 7,000 lbs $ 583 6,000 lbs $ 550 5,000 lbs $ 533 4,000 lbs $ 500 8,000 lbs 4WD $ 933 Trailers* 2060 Load King (3 axle) $ Load King (2 axle) $ 667 XL 3 axle $ 800 XL 2 axle $ 667 Side Dump (3 axle) $ 867 Lowboy 55 ton $ 967 Bumper Pull ,000 gvw - - $,200 - Gooseneck ,000 gvw - - $,300 *Federal excise tax charged on rental.

49 MODEL WEEKLY PERIOD RPO PERIOD OVERTIME STANDARD RATE 4 Week RPO INDUSTRIAL EQUIPMENT Towable Diesel Generator Sets* DCA25 (20 kw) $ 375 XQ35 (27kW) $ 400 DCA45 (36 kw) $ 425 XQ60 (47.5kW) $ 475 DCA70 (56 kw) $ 550 DCA50 (20 kw) $ 875 DCA220 (76 kw) $,000 XQ200 (82kW) $,25 XQ350 (320kW) $,850 XQ375 (340kW) $,975 XQ400 (365kW) - - $ 7,200 - XQ500 (455kW) $ 2,300 XQ800 (725kW) $ 3,900 XQ000 (90kW) - - $ 5,000 - XQ $22,500 - XQ2000 (825kW) - - $28,000 - C5 (40 kw) - - $ 5,400 - QP625 (455 kw) - - $ 6,200 - C8 (545 kw) - - $ 8,000 - Towable Natural Gas Generator Sets XG65 (30/95kW) NG/LP $,300 XG35 (35kW) NG $,425 XG230 (84/2kW) NG/LP $,500 XG290 (232/97kW) NG/LP $,725 XG470 (375/250kW) NG/LP $ 2,350 XG625 (500/340kW) NG/LP $ 2,900 XG kW NG $ 8,200 Ancillary Electrical Equipment 4/0 Cable 50 $ 33 4/0 Cable 00 $ DLO Cable 50 $ DLO Cable 00 $ 266 Spider Box $ 70 Heaters TH250CC (Continuous shift) $ 2,00 MH500IQ (Continuous shift) $ 530 Ducting $ 25 Air Compressors 85CFM $ CFM $ CFM $, CFM $ 2,050

50 POWER SYSTEMS INFORMATION & RESPONSIBILITIES. All Standard Rent/Lease Terms and Conditions will apply as described in the Wyoming Machinery Company Rent/Lease Agreement. 2. Rental Rates are based on 76 hours per 28 day period.weekly Rate is based on 40 hours per week. Double Shift based on 352 hours (.75 X Single Shift Rate). Triple Shift based on 528 hours (2.5 X Single Shift Rate).Continuous Shift based on 672 hours (2.75 X Single Shift).New model may warrant price change. 3. Extra hours per period or overtime will be billed at any time and in Wyoming Machinery Company s discretion, normally upon return of the equipment. 4. Rental rates are subject to equipment availability and are subject to change without notice and will increase for rock and heavy abrasive applications. 5. Rental Rates do not include: transportation of equipment, all applicable state sales use taxes, mobile machinery fees and any UCC fees. 6. Rental Rates do not include assembly and disassembly charges. 7. Rental Rates do not include additional ancillary items. 8. First month rent due in advance without prior credit approval. 9. Equipment will not be shipped unless lessee has an account approved by the Wyoming Machinery Company Credit Department. 0. During the initial eighteen billing cycles Wyoming Machinery Company will provide labor and materials for necessary and required major mechanical repairs on the equipment arising from normal use.. In the event the equipment is damaged and requires repair the terms and conditions of the Rent/Lease Agreement shall continue during the period of repair. 2. After eighteen billing cycles Wyoming Machinery Company has the discretion to replace the equipment with substitute equipment of the same or similar capabilities. 3. After eighteen billing cycles all costs associated with repairs and maintenance are the sole responsibility of Lessee. 4. Lessee will be responsible for all damage to the equipment and insure the equipment for physical damage at the stated replacement value. 5. Lessee is responsible for daily lubrication, normal maintenance and daily inspection of equipment at all required intervals. 6. Wyoming Machinery Company will supply Scheduled Oil Sampling kits. Lessee will provide labor to take all required oil samples..7. Lessee will be charged for damage, cuts and wear to rubber track belts and tire equipment. Measured rubber track or tire wear will be billed based on /32nd of wear. 8. D.O.T. driver with CDL is required for on-highway trucks. 9. Lessee shall operate all units in a safe and reasonable manner using only qualified operators. Wyoming Machinery Company offers several levels of operator training. 20. Wyoming Machinery Company offers Maintenance Service Contracts at some locations for an additional charge. 2. Wyoming Machinery Company will provide equipment with a full tank of fuel at the beginning of the term. 22. Lessee will return equipment with a full tank of fuel or be charged for fueling the equipment. 23. Equipment should be returned in a reasonably clean condition. 24. Purchase option is available on most models. 25. Lessee is not allowed to rent to other third parties. 26. Maintenance contracts available at a fee based charge. 27. Maintenance contracts available at a fee based charge. Tier 4 final engines that take DEF fluid needs to meet the ISO 224- requirement. DO NOT use agricultural grade urea solutions in DEF for they will cause harm to SCR emissions system. Not withstanding the foregoing, the fully executed Rental/Lease Agreement constitutes the entire agreement between the parties with respect to the equipment and supersedes any other written or oral communications, specifically including this information. Additional terms and responsibilities may apply for specific models. For additional information and model availability contact Engine Sales Representative at (307) Rental rates and additional information available at

51 POWER SYSTEMS SALES POWER SYSTEMS RENTAL AND FLEET MANAGER Tait Helmey Power Systems Sales Casper: (307) Mobile: (307) Brad Long Power Systems Sales Casper: (307) Mobile: (307) Nate Demander Industrial Equipment Coordinator. Casper: (307) Mobile: (307) POWER SYSTEMS PRODUCT SUPPORT SALES PRODUCT SUPPORT INSIDE SALES Chip Smith Power Systems Product Support Sales Rock Springs: (307) Mobile: (307) Greg Pollick Power Systems Product Support Sales Gillette: (307) Mobile: (307) Inside Sales Representative Power Systems Inside Sales Casper: (307) Mobile: (307) Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) w w w. w y o m i n g c a t. c o m

52 POWER SYSTEMS RENTALS Wyoming Machinery Company Casper (307) Gillette (307) Cheyenne (307) Rock Springs (307) Gillette Mining (307) EFFECTIVE JANUARY 208 All rates subject to change without notice. w w w. w y o m i n g c a t. c o m