Wind Energy Catalog Solutions for the Wind Industry

Transcription

1 RenewableConnections Wind Energy Catalog Solutions for the Wind Industry TM Experience. Technology. Answers.

2 Why Choose BURNDY Experience. Technology. Answers ṬM As the wind industry has grown so has our involvement. Today, we supply products and services that span the entire scope (turbine, tower, collector system, substation, and transmission) of the wind industry. As a result of our global reach, BURNDY can offer product solutions and value added services that are unparalleled in the industry. We have been, and continue to be, focused on providing solutions to the most challenging application requirements. BURNDY is developing products that are specific to the wind industry. We recently launched a revolutionary line of connectors that are field adaptable by the installer. The BREAK-AWAY TM line of compression connectors are designed to provide maximum field flexibility by allowing the installer (using the BREAK- AWAY TM feature) to easily convert a two-hole connector to a one-hole connector on the fly. From the ground up, tap into BURNDY connector and tooling technology for all your renewable energy products.

3 Products for Wind Farm Applications Products For: Turbine & Tower Collector & Grounding Substation Transmission BURNDYWeld Exothermic Grounding DURIUM TM Hardware Flexible Braid Heat Shrink HYDENT TM Compression Connectors HYGROUND Compression Grounding IMPLO TM Connectors Installation Tooling Mechanical Connectors Mechanical Grounding PENETROX TM Oxide Inhibitor SERVIT Connectors Substation Connectors Transmission Connectors UNIRAP TM Cable Ties UNITAP TM Insulated Multi-tap VERSI-POLE TM Distribution Blocks Experience. Technology. Answers. TM

4 Connector and Tooling Solutions for Wind Farm Applications Products For: Turbine & Tower Collector & Grounding Substation Transmission BURNDYWeld Exothermic Grounding DURIUM TM Hardware Flexible Braid Heat Shrink HYDENT TM Compression Connectors HYGROUND Compression Grounding IMPLO TM Connectors Installation Tooling Mechanical Connectors Mechanical Grounding PENETROX TM Oxide Inhibitor SERVIT Connectors Substation Connectors Transmission Connectors UNIRAP TM Cable Ties UNITAP TM Insulated Multi-tap VERSI-POLE TM Distribution Blocks Grounding Products: HYGROUND, Mechanical Grounding and BURNDYWeld HYDENT TM Compression Products (available in aluminum or copper) Braid Products Substation Products (available in aluminum or copper)

5

6 Wind Turbine Power Applications HYDENT TM Compression Connectors Mechanical Connectors Accessories Installation Tooling

7 Wind Turbine Grounding Applications 1 3 Flexible Braid 2 Mechanical Grounding 5 HYGROUND 4 Installation Tooling BURNDYWeld

8 Wind Turbine Technical Specification 1 Nacelle 8 Main Shaft 15 Blade 2 Generator 9 Yaw Gears 16 Main Panel 3 Nacelle Computer 10 Tower 17 CPU 4 Anemometer Windvanes 11 Machine Foundation 18 Transformer & Switchgear 5 Coupling 12 Main Bearing 19 Pad Mounted Transformer 6 Mechanical Brake 13 Hub Computer 7 Gearbox 14 Pitch System

9 Experience Founded July 19, 1924 in New York City under the name of BURNDY Engineering Company. Over 84 years of experience in engineering and manufacturing of quality connectors and tooling to the electrical industry. Headquartered in Manchester, New Hampshire. Technology BURNDY owns an in-house certified test lab which offers state-of-the-art test equipment. Our lab tests connectors and tooling to the following standards: ANCE, ANSI, ASTM, CSA, IEC, IEEE, NEMA, UL, NUPIC, OSHA, SAE, and Military. Quickly and efficiently create virtually any model that our customers desire using the Dimension 1200 Series rapid prototype machine. Answers BURNDY is the recognized leader in innovation in engineering and manufacturing of high quality compression connectors, grounding products and installation tooling. Actively involved in the wind industry from its inception, providing connector and tooling products that have stood the test of time. Supplying products and services that span the entire scope (turbine, tower, collector system, substation, and transmission) of the wind industry. A trained and experienced factory sales force that is available to assist you with choosing the right BURNDY connector and tooling solution for your specific application.

10 BURNDY Renewable ProductsWind HYDENT INTRODUCTION MEDIUM AND LARGE HYDENT Copper and aluminum compression terminals and splices for terminating conductors from #8 AWG through 2000 kcmil. The medium and large HYDENT line is designed for terminating and splicing medium and large conductors in electrical power applications. HYLUG UNINSULATED COPPER COMPRESSION TERMINALS UL Listed 90 C, 600 Volts to 35 kv BURNDY s HYLUG terminals, types YA, YA- TC, YA-L, YA-L-TC, YA-2N, YA-2TC, YA-L- TC-FX, YA-L-2TC, and YA-2LN are designed for terminating copper conductors in a wide variety of electrical connections, including heavy-duty industrial, utility, commercial, and telecommunications applications. The HYLUG terminals require simple cable preparation for an easily installed permanent and inspectable cable termination. The terminals are listed by UL (UL STD. 486A) and CSA Certified to 600 volts, when applied with the proper tool and die combination. The terminals may be used in applications to 35 kv. See each catalog page for UL 35 kv listings. COMPRESSION CONNECTORS BURNDY s compression connectors are designed for reliable and controllable electrical connections. The complete installation is fully inspectable. They are high conductivity copper and operate cooler than the wire on which they are installed. The connectors withstand a wide range of electrical and environmental conditions, including current surges, temperatures, corrosion and vibrations, for a wide variety of applications. These features mean a consistently high quality connection at a low installed cost. Copper compression connectors are manufactured from high-conductivity electrolytic copper. The connectors are normally tinplated, lead-plated, or plated with proprietary BURNDY brite finish to provide durable longlasting corrosion resistance. The connector design has been matched to the cable size to provide the necessary physical strength requirements for reliable electrical performance. Aluminum compression connectors are manufactured from high conductivity, high purity wrought aluminum. They are designed with sufficient mass and are electro-tin plated to minimize corrosion due to galvanic action between dissimilar metals. The connector barrels are pre-filled with PENETROX, BURNDY s oxide inhibiting compound. PENETROX contains homogeneously suspended metallic particles which penetrate the wire s oxides to establish excellent continuity between the individual strands and the connector barrel for a low-resistance connection. PENETROX maintains an air-tight connection. Each barrel end is covered with a color-coded plastic dust cap which prevents foreign matter from entering the connector before it is used. The connector design has been engineered to match the cable size to provide the necessary physical strength requirements for reliable electrical performance. SELECTION AND USE Copper compression connectors are recommended for use on copper conductors. Aluminum compression connectors are recommended for use on aluminum conductors. Dual-rated aluminum compression connectors may be used on both copper and aluminum conductors. Two basic compression designs are available: Circumferential and indent. Circumferential compression is solid and symmetrical. No sharp Flash. Indent compression. The connector is swaged to the conductor. After compression, virtually all the air is removed leaving a tight homogeneous mass of connector and conductor. The circumferential crimp design is recommended for color coded connectors in low and high voltage applications. Die index number embossment provides an easy inspection where required to verify the use of the proper connector/die combination. It is also recommended for insulated connectors and for terminating flexible and welding cables. The circumferential crimp design dies compress cable strands into polygonal shapes forming intimate contact with each other and the connector barrel. This compression forms a tight homogeneous mass with virtually no air pockets. The circumferential crimp provides an excellent electrical connection with high pull-out values. The circumferential crimp is ideal for high voltage applications leaving the connector barrel symmetrical, which is easier to insulate. The indent type crimp can be used in vir tually any application except polyvinylchloride (PVC) insulated terminals and splices. It is an excellent means of terminating flexible, extra flexi- ble and welding cables. The indentor compresses the cable strands to form intimate contact with each other and the connector barrel. The result is an excellent electrical connection with high pull-out strength. Laboratory work testing curves established the proper depth and shape of indent for each type of connector and wire combination. TOOLING Tooling systems are essential for proper installation of a compression connector. Since connectors and dies are designed as a unit for specific wire sizes, only the recommended tools and dies should be used. Most aluminum and copper HYLUG terminals and HYLINK splices are marked with a die index number and are color-coded to identify the correct installation die. Dies marked with the matching die index number and color can be used to install the connector. BURNDY tooling installs a wide range of connectors, is reliable, cost effective, and precision engineered for durable, long-lasting service and quality connections. The tools include small plier types, full cycle ratchet designs and hydraulically-powered HYPRESS heads and new Battery Actuated Tools. Some have permanent die grooves or adjustable dies, while others require a change of die sets or nest die for each connector size. BURNDY s recommended tools achieve crimp performance consistent with UL and other industry standards. Since several tools are suitable for most connectors, the most economical and practical tool can be chosen for each application. INDUSTRY STANDARDS BURNDY s compression terminals, splices and tap connectors requiring third party testing and approval are listed by Underwriters Laboratories, Inc. Many have also received CSA approval and are approved under MIL-T-7928 and other military standards. All conform to applicable sections of the National Electrical Code. BURNDY also offers connectors and splices which meet the (LOCA Seismic and Aging) requirements of IEEE standards 323, 383 and 344 for class 1E critical circuits for use in Nuclear Utility Applications. Certification to 10CFR50 and 10CFR21 available. Detail catalog listings should be consulted to obtain the appropriate standards for each connector and splice. US: BURNDY LLC Canada:

11 HYDENT BURNDY Renewable ProductsWind TYPES YBA, YBA-FX, YBAV-FX and YBA-A BREAK-AWAY HYLUG Copper and Aluminum Compression Terminals UL Listed 90 C, 600 Volts to 35 kv The BREAK-AWAY line of Copper and Aluminum HYLUG terminals are designed to provide maximum field flexibility by allowing the installer (using the BREAK-AWAY feature) to easily convert two-hole terminals to onehole terminals to suit the application. The BREAK-AWAY line of terminals encompasses a wide range of features that affords the installer the flexibility in meeting the requirements for challenging projects. Copper Conductor Features and Benefits BREAK-AWAY feature allows for field modification of the terminal from a two-hole design to a one-hole design and the terminal still retains its UL Listing and CSA Certification. Field modification of the terminal does not require specialized tooling or training. Stud size is 1/2 (12 mm 2 ) on the first stud as well as the slotted second stud. Slotted second stud provides built in flexibility for the terminal to conform to various bus bar dimensions. With the slotted second stud, the terminal can be used on two-hole spacing ranging from 1.00 to Narrow tongue design allows for the terminal to fit into tight spaces. Accommodates a wide range of conductor combinations (AWG, Compact, DLO, Flex as well as Metric). Break-Away Feature T Dimensions Installation Tooling (# of crimps) Stud Stud MD6, MD7, Y500CTHS, Y35, Y39, Y750, Catalog Conductor Hole Hole Tongue MD7-34R platforms PAT60018V, *Y46, PAT750, Color Die Number Size mm 2 Spacing Size Width B T L Dieless OUR840** PATMD6 platform *PAT46 platforms Code Index W25VT (4) W25VT (4) 1/0 Flex (275/24); 1 to 1/4 12 or YBAV25FX X25RT (4) X25RT (4) U25RT (2) Pink 1/0 AWG 1.75 [6] MY29 (MY29 platform 348 W25RT (4) W25RT (4) tools can only be used W26VT (4) W26VT (4) 2/0 Flex (325/24); 1 to 1/4 on Code Conductor), YBAV26FX X26RT (4) X26RT (4) U26RT (2) Black 13 2/0 AWG 1.75 [6] PAT644- & Y644- W26RT (4) W26RT (4) platforms (1) W27VT (4) W27VT (4) 3/0 Flex (450/24); 1 to 1/4 4-POINT YBAV27FX X27RT (4) X27RT (4) U27RT (4) Orange 14 3/0 AWG 1.75 [6] Y81K, PAT81K, Y4PC W27RT (4) W27RT (4) PAT4PC- X28RT (6) X28RT (6) 4/0 Flex (550/24); 1 to platforms (2) YBAV28FX 120 1/ W28RT (4) W28RT (4) U28RT (2) Purple 15 4/0 AWG 1.75 [12] W28VT (4) W28VT (4) YBA kcmil 1 to 1/2 PAT644 & Y644 W29RT (4) W29RT (4) (Class A & B) 1.75 [12] platforms (1), W29VT (4) W29VT (4) U29RT (2) Yellow 16 YBA31FX 250 kcmil 1 to 1/2 4-POINT Y81K, W30VT (4) W30VT (4) 17 or U30RT (4) White (Class I, K & M) 1.75 [12] PAT81K, Y4PC, PAT4PC W30RT (4) W30RT (4) 298 YBA32FX kcmil Flex 1 to 1/2 platforms (2) for YBA29, W31VT (4) W31VT (4) 18 or U31RT (4) Red (775/24) 1.75 [12] (3) for YBA31FX & W31RT (4) W31RT (4) 324 YBA34FX kcmil Flex 1 to 1/2 YBA32FX, W32VT (4) W34VT (6) 19 or U32RT (4) Blue (775/24) 1.75 [12] (4) for YBA34FX W32RT (4) W34RT (6) 470 * Y46 and PAT46 platforms require PUADP-1 adaptor to use U dies. ** OUR840 can use X-style dies only. L B O.D. The BREAK-AWAY line of terminals can be installed with standard BURNDY tooling (example: PAT750XT-18V) and U-dies. UL Listed/CSA Certified with 900 kcmil compact aluminum conductor, using Y644 (1 Crimp) tooling platforms only. Terminals are range taking when installed with Y644 tooling platforms. Canada: BURNDY LLC US:

12 BURNDY Renewable ProductsWind HYDENT TYPES YBA, YBA-FX, YBAV-FX and YBA-A BREAK-AWAY HYLUG (Continued) Copper and Aluminum Compression Terminals Break-Away Feature T L B O.D. UL Listed 90 C, 600 Volts to 35 kv Copper Conductor (Continued) Dimensions Installation Tooling (# of crimps) Stud Stud Catalog Conductor Hole Hole Tongue Y35, Y39, Y750, *Y46, PAT750, Color Die Number Size mm 2 Spacing Size Width B T L Dieless *PAT46 platforms Code Index 1 to 1/2 YBA36FX 440 kcmil Flex 1.75 [12] 20 or kcmil U34RT (4) Brown 1 to 5/8 299 YBA36FX58 (1100/24) 1.75 [16] Flex 1 to 1/2 YBA38FX (1325/24) U38XRT (4) Pink L [12] Y644, PAT644 (1), 500 kcmil nom. Y81K, PAT81K (2) 750 kcmil (Code 1 to 1/2 YBA U39RT (4) Black 24 Class AA, A & B) 1.75 [12] 750 kcmil Flex 1 to 1/2 YBA44FX (Class I); 1.75 [12] Flex 1 to 5/8 YBA44FX58 (1925/24) 1.75 [16] U44XRT (4) Yellow L115 * Y46 and PAT46 platforms require PUADP-1 adaptor to use U dies. Photo by Roger Ferguson Control Terminations US: BURNDY LLC Canada:

13 HYDENT BURNDY Renewable ProductsWind TYPES YBA, YBA-FX, YBAV-FX and YBA-A BREAK-AWAY HYLUG (Continued) Copper and Aluminum Compression Terminals Break-Away Feature T L B O.D. UL Listed 90 C, 600 Volts to 35 kv Aluminum Conductor Dimensions Installation Tooling (# of crimps) Stud MD6, MD7, Y500CTHS, Y35, Y39, Y750, Conductor Size Stud Hole MD7-34R PAT60018V, *Y46, PAT750, Catalog (Concentric and Hole Size Tongue platforms PATMD6 *PAT46 Color Die Number Compact) Spacing [mm] Width B T L Dieless OUR840** platform platforms Code Index YBA25A 1/0 1 to 1/2 MY29 (MY29 platform W241 (2) [12] tools can only be used X241 (4) W241 (2) U25ART (1) Tan 296 YBA26A 2/0 1 to 1/2 on Code Conductor), [12] PAT644 & Y644 U26ART (2) Olive 297 YBA27A 3/0 1 to 1/2 platforms (1), [12] 4-POINT U27ART (2) Ruby 467 YBA28A 4/0 1 to 1/2 Y81K, PAT81K. Y4PC, W660 (4) [12] PAT4PC platforms (2) X660 (8) W660 (4) U28ART (2) White 298 YBA29A 250 kcmil 1 to 1/2 PAT644 & Y [12] platforms (1) U29ART (2) Red 324 YBA30A 300 kcmil 4-POINT Y81K, 1 to 1/ PAT81K, Y4PC, 1.75 [12] PAT4PC platforms (2) U30ART (2) Blue 470 YBA31A 350 kcmil 1 to 1/ [12] U31ART (2) Brown 299 YBA32A 400 kcmil 1 to 1/2 PAT644 & Y [12] platforms (1), U32ART (4) Green 472 YBA34A 500 kcmil 1 to 1/2 4-POINT [12] Y81K, PAT81K, Y4PC, U34ART (4) Pink 300 YBA36A 600 kcmil 1 to 1/2 PAT4PC [12] platforms (4) U36ART (4) Black 473 YBA39A 700 & 750 kcmil 1 to 1/ [12] U39ART-2 (2) Yellow 936 YBA44A 1000 kcmil 1 to 1/ [12] Y644MBH (1) P44ART (4) Brown 302 Can only be crimped with PAT46 or Y46 platform tools using the P44ART die. * Y46 and PAT46 platforms require PUADP-1 adaptor to use U dies. ** OUR840 can use X-style dies only. Canada: BURNDY LLC US:

14 BURNDY Renewable ProductsWind HYDENT TYPES YA-2NU, YA-4NU Blank Tongue HYLUG T B The Blank Tongue line of Copper Code HYLUG terminals are designed to provide maximum field flexibility. Scored lines prevent the drill from walking when trying to drill in this area. This innovative design allows the installer to customize the tongue drilling to fit their specific application while maintaining UL Listing and CSA certification. Features and Benefits L Manufactured from seamless highconductivity electrolytic copper tubing with heavy duty wall thickness. Internally beveled barrel end. Proper compression systems form a highly efficient electrical connection. Dimples located at each end of the scored line represent the location of the NEMA standard hole spacing. Scored line locates the center of the Tongue and prevents the drill from walking when trying to drill in this area. Offered in a wide range of code conductor sizes. Installation Tooling Conductor Min. Dieless Mechanical Hydraulic Wire Catalog *** Bolt Tongue Figure Dimensions (# of MD6, OUR840, PAT600, Y750, Y46*, Color Die Strip Number AWG MM 2 Hole** Width B T L crimps) MD7-34R Y500CTHS PAT750 Code Index Length W25VT (4) W25VT (4) U25RT (2) YA252NU 1/0 AWG 1/ W25RT (4) W25RT (4) Pink /16 U2CABT (2) X25RT (4) X25RT (4) MY29-3 (2) W26VT (4) W26VT (4) MY29-11 (2) YA262NU 2/0 AWG 70 1/ W26RT (4) W26RT (4) U26RT (2) Black /16 MRC840 (4) X26RT (4) X26RT (4) Y644HS (1) W27VT (4) W27VT (4) 4-Point Family (2) YA272NU 3/0 AWG 1/ W27RT (4) W27RT (4) U27RT (2) Orange /16 X27RT (6) X27RT (6) W28VT (4) W28VT (4) YA282NU 4/0 AWG 1/ W28RT (4) W28RT (4) U28RT (2) Purple /16 X28RT (6) X28RT (6) YA292NU 250 kcmil 120 1/ MY29-3 (2) W29VT (4) MY29-11 (2) W29VT (4) W29RT (4) Y644HS (1) X29RT (8) X29RT (8) 4-Point Family (2) U29RT (2) Yellow /16 YA312NU 350 kcmil 185 1/ Y644HS (1) W31VT (4) U31RT (4) W31VT (4) 4-Point Family (3) W31RT (4) U29ART (4) Red /16 YA342NU 500 kcmil 240 3/ Y644HS (1) W34VT (4) U34RT (4) W34VT (4) 4-Point Family (4) W34RT (4) U31ART (4) Brown /16 U39RT (4) YA392NU 750 kcmil 3/ Y644HS (1) Black /16 P39RT (4)** 4-Point Family (3) YA442NU 1000 kcmil 500 3/ P44RT (4)** White /16 *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. * Use PUADP-1 adaptor with U -dies in Y46 HYPRESS Requires Y60BHU HYPRESS ** Minimum bolt hole size must be maintained for UL & CSA. US: BURNDY LLC Canada:

15 HYDENT BURNDY Renewable ProductsWind TYPES YBA-KIT, YA-KIT, YBAFX-KIT, YAFX-KIT Copper and Aluminum Turbine Lug Kits UL Listed 90 C, 600 Volts to 35 kv Aiding in the staging and flow of material on a project, the BURNDY Turbine Lug Kits are designed to meet the termination requirements for the standard 1.5 MW wind turbine, improving overall project efficiency. Each lug kit contains UL Listed and CSA Certified copper or aluminum lugs. Kits include the required number of lugs needed to terminate aluminum or copper conductors on the low voltage side of a base transformer or the down tower switchgear. There are four individual kits, two for aluminum, two for copper, they are all custom designed to handle any termination requirements. Copper Kits Catalog Number YBAFX15CLKIT YAFX15CLKIT Features & Benefits Includes: 15 pcs YBA44FX (777.7 Flex Cu 2-hole NEMA lug); 3 pcs YA29-2N (250 kcmil Cu 2-hole NEMA lug) 15 pcs YAZ442NNTFX (777.7 Flex Cu 2-hole NEMA lug); 3 pcs YA29-2N (250 kcmil Cu 2-hole NEMA lug) YA44A3 (1000 kcmil aluminum) HYLUG, 2-hole, narrow tongue aluminum compression terminal that is dual rated for both copper and aluminum. YBA44A (1000 kcmil, 1000 compact aluminum) BREAK-AWAY HYLUG, 2- hole narrow tongue aluminum compression terminal that is dual rated for both copper and aluminum. The BREAK-AWAY feature allows for field modification of the terminal from a 2-hole to a 1-hole terminal and still retain UL Listing and CSA Certification. YAZ442NNTFX (777.7 Flex, 1925/24 str., 750 kcmil copper) HYLUG, 2-hole, narrow tongue copper compression terminal that accommodates flex and AWG conductor. YBA44FX (777.7 Flex, 1925/24 str. [750 kcmil] nom. copper) BREAK-AWAY HYLUG, 2-hole, narrow tongue copper compression terminal that accepts a wide range of conductor combinations (AWG, compact, DLO, flex, metric). The BREAK- AWAY feature allows field modification of the terminal from a 2-hole to 1-hole terminal and still retain UL Listing and CSA Certification. Both aluminum and copper low voltage turbine lug kits include YA29-2N (250 kcmil, copper, 2-hole) lugs for terminating grounding conductor. Aluminum kits are shipped with squeeze packets of PENETROX oxide inhibitor for terminating aluminum conductor. Aluminum Kits Catalog Number YBA15ALKIT YA15ALKIT Includes: 15 pcs YBA44A (1000 Al 2-hole NEMA lug); 3 pcs YA29-2N (250 kcmil Cu 2-hole NEMA lug); 1 squeeze tube (1/2 oz) of PENETROX oxide inhibitor 15 pcs YA44A3 (1000 Al 2-hole NEMA lug); 3 pcs YA29-2N (250 kcmil Cu 2-hole NEMA lug); 1 squeeze tube (1/2 oz) of PENETROX oxide inhibitor Heat shrink and mounting hardware sold separately. Canada: BURNDY LLC US:

16 BURNDY Renewable ProductsWind HYDENT ONE HOLE HYLUG FLEX CONDUCTOR STANDARD BARREL TYPES YA-L, YA-L-FX, YAV, YAV-L-FX Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv DIE AND COLOR CODE INFORMATION INSPECTION WINDOW ELECTRO-TIN PLATED BEVELED ENTRY CRIMP CABLE ACCOMMODATION 45 and 90 angles are available. Please contact Customer Service to order: T B 90 T T 45 L L L Fig B B Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, BCT500HS, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length MY29-11 (1) YAV6CL-TC34-FX 1 61/24 Y644HS (1) ** #6 Weld 3/ Y81KFT (1) 16 #6 AWG Y81KFTMBH (1) W5CVT (1) X5CRT (1) U5CRT (1) Blue 7 1/2 PAT81KFT-18V (1) 91/24 W4CVT (1) W4CVT (1) 105/24 YAV4CL-TC12-FX 1 1/ Y1MRTC (2) W4CRT (1) W4CRT (1) U4CRT (1) Gray 8 1/2 #4 Weld MY29-11 (1) X4CRT (1) X4CRT (1) #4 AWG Y81KFT (1) 125/24 Y81KFTMBH (1) W2CVT (1) W2CVT (1) 150/24 YAV2CL-TC12-FX / PAT81KFT-18V (1) W2CRT (1) W2CRT (1) U2CRT (1) Brown 10 11/16 #2 Weld X2CRT (1) X2CRT (1) #2 AWG 175/24 W1CVT (1) W1CVT (1) 225/24 YAV1CL-TC12-FX 1 1/ MY29-11 (1) W1CRT-1 (1) W1CRT-1 (1) U1CRT (1) Green 11 11/16 #1 Weld Y81KFT (1) X1CRT-1 (1) X1CRT-1 (1) #1 AWG Y81KFTMBH (1) 275/24 W25VT (2) W25VT (2) PAT81KFT-18V (1) YAV25L-TC12-FX 1 1/0 Weld 50 1/ W25RT (2) W25RT (2) U25RT (1) Pink 12 11/16 1/0 AWG X25RT (2) X25RT (2) 325/24 W26VT (2) W26VT (2) YAV26L-TC12-FX 1 2/0 Weld 70 1/ W26RT (2) W26RT (2) U26RT (1) Black 13 13/16 2/0 AWG MY29-11 (1) X26RT (2) X26RT (2) 450/24 Y644HS (1) W27VT (2) W27VT (2) YAV27L-TC12-FX 1 3/0 Weld 95 1/ Y81KFT (1) W27RT (2) W27RT (2) U27RT (1) Orange /0 AWG Y81KFTMBH (1) X27RT (3) X27RT (3) 550/24 PAT81KFT-18V (1) W28VT (2) W28VT (2) YAV28L-TC14-FX 1 4/0 Weld ** 1/ W28RT (2) W28RT (2) U28RT (1) Purple /16 4/0 AWG 120 X28RT (2) X28RT (3) * Use PUADP-1 adapter with U dies in Y46 HYPRESS. ** The MM 2 conductor size listed is for both Class 2 and Class 5 conductors. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

17 HYDENT BURNDY Renewable ProductsWind ONE HOLE HYLUG FLEX CONDUCTOR STANDARD BARREL (Continued) UL Listed 90 C, 600 Volts to 35 kv T L Fig. 1 B T B 90 T 45 L L B 45 and 90 angles are available. Please contact Customer Service to order: Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, BCT500HS, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length YAV29L-TC12-FX 1 550/24 1/ /0 Weld MY29-11 (1) 250 Flex Y644HS (1) W29VT (2) W29VT (2) Class G Y81KFT (1) W29RT (2) X29RT (4) YA30L-TC12-FX Str. 1/ Y81KFTMBH (1) X29RT (4) U29RT (1) Yellow /16 Class H PAT81KFT-18V (1) YA31L-TC12-FX Str. 250 Flex W30VT (2) 637/ / W30VT (2) W30RT (2) Class I, K, M U30RT (2) White / kcmil W31VT (2) YA32L-TC12-FX 1 775/ / W31VT (2) U31RT (2) Red /4 W31RT (2) 300 Flex Y644HS (1) kcmil Y81KFT (1) W32VT (2) YA34L-TC12-FX 1 925/ / W32VT (2) U32RT (2) Blue /16 Y81KFTMBH (1) W32RT (2) 350 Flex PAT81KFT-18V (1) kcmil YA36L-TC12-FX Flex 1/ U34RT (2) Brown /8 1100/ kcmil YA38L-TC12-FX / / U38XRT (2) Pink L99 1-7/ Flex YA44L-TC12-FX 1 Y644HS (1) kcmil Y81KFT (2) 500 1/ /24 Y81KFTMBH (2) U44XRT (2) Yellow L /8 PAT81KFT-18V (2) * Use PUADP-1 adapter with U dies in Y46 HYPRESS ** The 16 MM 2 is for both Class 2 and Class 5 conductors. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Photo by Craig Lawson Canada: BURNDY LLC US:

18 BURNDY Renewable ProductsWind HYDENT ONE HOLE HYLUG FLEX CONDUCTOR LONG BARREL WITH INSPECTION WINDOW TYPES YAZ, YAZV Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: INSPECTION WINDOW ELECTRO-TIN PLATED T DIE AND COLOR CODE INFORMATION L B T L B 45 CRIMP BEVELED ENTRY CABLE ACCOMMODATION Fig T 90 L B Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, BCT500HS, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length 275/24 W25VT (4) W25VT (4) YAZV25TC12FX 1 1/0 Weld 50 1/ W25RT (4) W25RT (4) U25RT (2) Pink /16 1/0 AWG X25RT (4) X25RT (4) 325/24 W26VT (4) W26VT (4) MY29-11 (2) YAZV26TC12FX 1 2/0 Weld 70 1/ W26RT (4) W26RT (4) U26RT (2) Black /16 Y644HS (1) 2/0 AWG X26RT (4) X26RT (4) Y81KFT (2) 450/24 W27RT (4) W27RT (4) Y81KFTMBH (2) YAZV27TC38FX 1 3/0 Weld 95 3/ W27VT (4) W27VT (4) U27RT (2) Orange /16 PAT81KFT-18V (2) 3/0 AWG X27RT (4) X27RT (4) 550/24 W28VT (4) W28VT (4) YAZV28TC12FX 1 4/0 Weld ** / W28RT (4) W28RT (4) U28RT (2) Purple /16 4/0 AWG X28RT (6) X28RT (6) YAZ30TC38FX Flex W29RT (4) W29VT (4) Class G 259 Str. 3/ W29VT (4) X29RT (8) Class H 427 Str X29RT (8) U29RT (2) Yellow /16 YAZ31TC38FX Flex W30VT (4) 637/ / W30VT (4) W30RT (4) Class I, K, M U30RT (4) White /16 YAZ32TC38FX 1 775/24 W31VT (4) kcmil 185 3/ Y644HS (1) W31VT (4) W31RT (4) 300 Flex Y81KFT (2) U31RT (4) Blue /16 YAZ34TC12FX 1 925/24 Y81KFTMBH (2) W32VT (4) kcmil 240 1/ PAT81KFT-18V (2) W32VT (4) W32RT (4) 350 Flex U32RT (4) Blue / /24 YAZ36TC38FX kcmil 3/ U34RT (4) Brown /4 450 Flex 1325/24 YAZ38NT12FX kcmil 300 1/ U38XRT (4) Pink L99 2-7/8 500 Flex * Use PUADP-1 adapter with U dies in Y46 HYPRESS ** The MM 2 conductor size referenced here is for both Class 2 and Class 5 conductor. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

19 HYDENT BURNDY Renewable ProductsWind ONE HOLE HYLUG CODE CONDUCTOR STANDARD BARREL DIE AND COLOR CODE INFORMATION INSPECTION WINDOW BEVELED ENTRY TYPES YA-L, YA-L-TC Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv ELECTRO-TIN PLATED CRIMP CABLE ACCOMMODATION 45 and 90 angles are available. Please contact Customer Service to order: B 90 T T T 45 L L L Fig B B Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length Y1MRTC (2) MY29-3 (1) YA1CL-BOX 1 #1 AWG 50 5/ MY29-11 (1) W1CVT (1) W1CVT (1) U1CRT-1 (1) MRC840 (1) W1CRT-1 (1) W1CRT-1 (1) U4CABT (1) Y644HS (1) X1CRT-1 (1) X1CRT-1 (1) Green 11 15/16 YA25L-BOX 1 1/0 AWG 5/ Point Family (1) MY29-3 (1) W25VT (2) W25VT (2) U25RT (1) MY29-11 (1) W25RT (2) W25RT (2) U2CABT (1) MRC840 (2) X25RT (2) X25RT (2) Pink 12 15/16 Y644HS (1) W26VT (2) W26VT (2) YA26L-BOX 1 2/0 AWG 70 3/ Point W26RT (2) W26RT (2) U26RT (1) Black 13 1 Family (1) X26RT (2) X26RT (2) MY29-3 (1) YA27L-BOX 1 3/0 AWG 1/ MY29-11 (1) W27VT (2) W27VT (2) MRC840 (2) W27RT (2) W27RT (2) Y644HS (1) X27RT (3) X27RT (3) 4-Point U27RT (1) Orange /16 YA28L-BOX 1 4/0 AWG 1/ Family (2) MY29-3 (1) MY29-11 (1) W28VT (2) W28VT (2) MRC840 (2) W28RT (2) W28RT (2) Y644HS (1) X28RT (2) X28RT (3) 4-Point U28RT (1) Purple /8 YA29L-BOX kcmil 1/ Family (2) MY29-3 (1) MY29-11 (1) W29VT (2) W29VT (2) Y644HS (1) W29RT (2) X29RT (4) 4-Point X29RT (4) U29RT (1) Yellow /8 Family (2) YA30L kcmil 150 1/ W30VT (2) W30VT (2) U30RT (2) W30RT (2) U28ART (2) White /16 W31VT (2) U31RT (2) YA31L kcmil 185 1/ Y644HS (1) W31VT (2) Red /16 W31RT (2) U29ART (2) 4-Point W32VT (2) U32RT (2) YA32L kcmil 5/ Family (2) W32VT (2) Blue /4 W32RT (2) U30ART (2) YA34L kcmil 240 5/ W34VT (2) W34VT (2) U34RT (2) W34RT (2) U31ART (2) Brown /16 * Use PUADP-1 adapter with U dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. See tooling section of this catalog for complete tool and die listings. Note: All dimensions shown are for reference only. Canada: BURNDY LLC US:

20 BURNDY Renewable ProductsWind HYDENT ONE HOLE HYLUG CODE CONDUCTOR STANDARD BARREL NARROW TONGUE DIE AND COLOR CODE INFORMATION INSPECTION WINDOW BEVELED ENTRY TYPES YA-L-NT Copper Compression Narrow Tongue Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: ELECTRO-TIN PLATED B T T T 45 L L CRIMP CABLE ACCOMMODATION Fig B 90 L B Conductor Installation Tooling Stud Figure **** Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length MY29-11 (1) MRC840 YA2CLNT14 1 #2 AWG 35 1/ Y644HS (1) W2CVT (1) X2CRT (1) U2CRT (1) Brown 10 15/16 4-Point Family (1) MY29-3 (1) YA25LNT /0 AWG # MY29-11 (1) W25VT (2) X25RT (2) U25RT (1) Pink 12 15/16 MRC840 Y644HS (1) YA26LNT /0 AWG 70 5/ Point Family (1) W26VT (2) X26RT (2) U26RT (1) Black 13 1 YA27LNT38 1 3/0 AWG 3/ W27VT (2) X27RT (3) U27RT (1) Orange /16 YA28LNT38 1 4/0 AWG 3/ W28VT (2) X28RT (3) U28RT (1) Purple /8 Y644HS (1) YA29LNT kcmil 3/ W29VT (2) X29RT (4) U29RT (1) Yellow /8 4-Point YA31LNT kcmil 185 3/ W31VT (4) U31RT (2) Red /16 Family (2) YA34LNT kcmil 240 3/ W34VT (4) U34RT (2) Brown /16 YA36LNT kcmil 300 3/ U36RT (2) Green /4 * Use PUADP-1 adapter with U dies in Y46 HYPRESS. ** The MM 2 conductor size listed is for Class 2 and Class 5 conductor. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. ****Y644M is not recommended for standard barrel length #6 AWG HYLUGs. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

21 HYDENT BURNDY Renewable ProductsWind ONE HOLE HYLUG CODE CONDUCTOR LONG BARREL TYPES YA, YA-TC Uninsulated Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv DIE AND COLOR CODE INFORMATION NO INSPECTION WINDOW ELECTRO-TIN PLATED BEVELED ENTRY CABLE ACCOMMODATION CRIMPS 45 and 90 angles are available. Please contact Customer Service to order: B 90 T T T 45 L Fig B L L B Conductor Installation Tooling Stud Figure Mechanical Hydraulic Wire *** Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number Fig # AWG MM 2 Size Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length W25VT (4) W25VT (4) U25RT (2) YA25 1 1/0 AWG 5/ W25RT (4) W25RT (4) Pink /16 MRC840 (4) U2CABT (2) X25RT (4) X25RT (4) MY29-3 (2) W26VT (4) W26VT (4) MY29-11 (2) YA26 1 2/0 AWG 70 3/ W26RT (4) W26RT (4) U26RT (2) Black /16 Y644HS (1) X26RT (4) X26RT (4) 4-Point W27VT (4) W27VT (4) Family (2) YA27 1 3/0 AWG 1/ W27RT (4) W27RT (4) U27RT (2) Orange /16 X27RT (6) X27RT (6) W28VT (4) W28VT (4) MY29-3 (2) YA28 1 4/0 AWG 1/ W28RT (4) W28RT (4) U28RT (2) Purple /16 MY29-11 (2) X28RT (6) X28RT (6) Y644HS (1) W29VT (4) 4-Point W29VT (4) YA kcmil 1/ W29RT (4) U29RT (2) Yellow /16 Family (2) X29RT (8) X29RT (8) YA kcmil 150 1/ Y644HS (1) W30VT (4) U30RT (4) 4-Point W30VT (4) White 17 or 2-1/16 W30RT (4) U28ART (4) 298 Family (3) YA kcmil 185 1/ Y644HS (1) W31VT (4) U31RT (4) 18 or 4-Point W31VT (4) Red 2-1/16 W31RT (4) U29ART (4) 324 Family (3) YA kcmil 5/ Y644HS (1) W32VT (4) U32RT (4) 4-Point W32VT (4) Blue 19 or 2-3/16 W32RT (4) U30ART (4) 470 Family (3) YA kcmil 240 5/ W34VT (4) W34VT (4) U34RT (4) 20 or Brown W34RT (4) U31ART (4) /16 U36RT (4) 22 or YA kcmil 300 5/ Y644HS (1) Green U32ART (4) /4 4-Point U39RT (4) YA kcmil 5/ Family (4) Black /16 P39RT (4) ** YA kcmil 500 1/ P44RT (4) ** White /16 * Use PUADP-1 adapter with U dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color coded die recommendations for - FX connectors. For nest/indentor system contact factory. Available undrilled. Add suffix U to catalog number (example: YA25U). For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Canada: BURNDY LLC US:

22 BURNDY Renewable ProductsWind HYDENT TWO HOLE HYLUG CODE CONDUCTOR STANDARD BARREL NARROW TONGUE DIE AND COLOR CODE INFORMATION INSPECTION WINDOW BEVELED ENTRY TYPES YA-L-2NT Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: ELECTRO-TIN PLATED CABLE ACCOMMODATION B T T T CRIMP Fig B B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length MRC840 (1) MY29-3 (1) MY29-11 (1) YA2CL2NT14 1 #2 AWG 35 1/4 5/ Y644HS (1) W2CVT (1) W2CVT (1) U2CRT (1) Brown 10 15/16 Y1MRTC (2) 4-Point Family (1) MRC840 (1) MY29-3 (1) MY29-11 (1) YA1CL2NT14E2 1 #1 AWG 50 1/4 3/ Y1MRTC (2) W1CVT (1) W1CRT (1) U1CRT (1) Green 11 15/16 Y644HS (1) 4-Point Family (1) YA25L2NT14E1 1 1/0 AWG - 1/ MRC840 (2) MY29-3 (1) MY29-11 (1) Y644HS (1) 4-Point Family (1) W25VT (2) W25VT (1) U25RT (1) Pink 12 15/16 YA26L2NT14 1 2/0 AWG 70 1/4 5/ MRC840 (2) MY29-3 (1) MY29-11 (1) W26VT (1) W26VT (2) Y644HS (1) X26RT (1) 4-Point Family (1) U26RT (1) Black 13 1 YA31L2NT kcmil 185 3/ Y644HS (1) W31VT (4) W31VT (4) U31RT (2) Red /8 4-Point YA39L2NT kcmil 3/ Family (2) U39RT (2) Black /2 * Use PUADP-1 adapter with U dies in Y46 HYPRESS. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

23 HYDENT BURNDY Renewable ProductsWind TWO HOLE HYLUG CODE CONDUCTOR LONG BARREL DIE AND COLOR CODE INFORMATION NO INSPECTION WINDOW BEVELED ENTRY TYPES YA-2N, YA-2TC, YA-4N UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: ELECTRO-TIN PLATED CABLE ACCOMMODATION B T T T 45 L L B CRIMP Fig L B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length MY29-3 (2) YA292N kcmil 1/2 1-3/ MY29-11 (2) W29VT (4) Y644HS (1) W29VT (4) W29RT (4) Y81KFT (2) X29RT (8) X29RT (8) Y81KFTMBH (2) U29RT (2) Yellow /16 PAT81KFT-18V (2) YA312N kcmil 185 1/2 1-3/ W31VT (4) U31RT (4) W31VT (4) Y644HS (1) W31RT (4) U29ART (4) Red /16 4-Point YA322N kcmil 1/2 1-3/ Family (3) W32VT (4) U32RT (4) W32VT (4) W32RT (4) U30ART (4) Blue /16 YA342N kcmil 240 1/2 1-3/ W34VT (4) W34VT (4) U34RT (4) W34RT (4) U31ART (4) Brown /2 YA362N kcmil 300 1/2 1-3/ U36RT (4) Y644HS (1) U32ART (4) Green /4 YA382N kcmil 1/2 1-3/ Point U38RT (4) Pink /8 YA392N kcmil 1/2 1-3/ Family (4) U39RT (4) P39RT (4) ** Black /4 YA402N kcmil 400 1/2 1-3/ P40RT (4) ** Orange 25 3 YA442N kcmil 500 1/2 1-3/ P44RT (4) ** White /16 See tooling section of this catalog for complete tool and die listings. * Use PUADP-1 adaptor with U -dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. " Available undrilled. Add suffix U to catalog number (example: YA25U). For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Control Terminations Canada: BURNDY LLC US:

24 BURNDY Renewable ProductsWind HYDENT TWO HOLE HYLUG CODE CONDUCTOR LONG BARREL WITH INSPECTION WINDOW TYPES YAZ-2N, YAZ-2TC Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: DIE AND COLOR CODE INFORMATION INSPECTION WINDOW ELECTRO-TIN PLATED CABLE ACCOMMODATION B T T T 45 L L B CRIMP Fig L BEVELED ENTRY B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length MY29-3 (2) YAZ29-2N kcmil 1/2 1-3/ MY29-11(2) X29RT (8) W29VT (4) Y644HS (1) W29VT (4) X29RT (8) 4-Point W29RT (4) U29RT (2) Yellow /16 Family (2) Y644HS (1) YAZ31-2N kcmil 185 1/2 1-3/ Point W31VT (4) Family (3) W31VT (4) U31RT (4) 18 or Red W31RT (4) U29ART (4) /16 YAZ34-2N kcmil 1/2 1-3/ W34VT (4) W34VT (4) U34RT (4) 20 or Brown 2-5/16 W34RT (4) U31ART (4) 299 U36RT (4) 22 or YAZ36-2N kcmil 300 1/2 1-3/ Y644HS (1) Green 2-3/4 U32ART (4) Point U39RT (4) YAZ39-2N kcmil 1/2 1-3/ Family (4) Black /16 P39RT (4) ** YAZ40-2N kcmil 400 1/2 1-3/ P40RT (4) ** Orange 25 3 YAZ44-2N kcmil 500 1/2 1-3/ P44RT (4) ** White /16 See tooling section of this catalog for complete tool and die listings. * Use PUADP-1 adaptor with U -dies in Y46 HYPRESS. ** P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. " Available undrilled. Add suffix U to catalog number (example: YA25U). For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Photo by Kurt Schaefer Low Voltage Terminations Photo by Dennis Vee Collector System Terminations US: BURNDY LLC Canada:

25 HYDENT BURNDY Renewable ProductsWind TWO HOLE HYLUG FLEX CONDUCTOR STANDARD BARREL COLOR CODE AND DIE INFORMATION INSPECTION WINDOW BEVELED ENTRY TYPES YA-L-2TC, YA-L-2TC-FX, YAV-L-2TC-FX Copper Compression Terminal ELECTRO-TIN PLATED CABLE ACCOMMODATION CRIMP UL Listed 90 C, 600 Volts to 35 kv For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. 45 and 90 angles are available. Please contact Customer Service to order: B T T T Fig B B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length 275/24 YAV25-L2NTC-FX 1 1/0 AWG 50 1/2 1-3/ W25VT (2) W25VT (2) U25RT (1) Pink 12 11/16 1/0 Weld 325/24 W26VT (2) W26VT (2) YAV26-L2NTC-FX 1 2/0 Weld 70 1/2 1-3/ MY29-11 (1) W26RT (2) W26RT (2) U26RT (1) Black 13 13/16 2/0 AWG Y644HS (1) X26RT (2) X26RT (2) 450/24 4-Point W27VT (2) W27VT (2) YAV27-L2TC38-FX 1 3/0 Weld 95 3/ Family (1) W27RT (2) W27RT (2) U27RT (1) Orange /0 AWG X27RT (3) X27RT (3) YAV28-L2NTC-FX 1 550/24 W28VT (2) W28VT (2) ** 4/0 Weld 1/2 1-3/ W28RT (2) W28RT (2) 120 4/0 AWG X28RT (3) X28RT (3) U28RT (1) Purple /16 550/24 YAV29-L2NTC-FX 1 1/2 1-3/ /0 Weld W29VT (2) W29VT (2) 250 Flex W29RT (2) U29RT (1) Yellow /16 X29RT (4) YA30-L2NTC-FX 1 CLASS G 259 Str. 1/2 1-3/ X29RT (4) CLASS H 427 Str. YA31-L2TC38-FX Flex W30VT (2) 637/ / W30VT (2) W30RT (2) CLASS I, K, M U30RT (2) White /8 YA34-L2NTC-FX kcmil W32VT (2) 925/ /2 1-3/ Y644HS (1) W32VT (2) W32RT (2) (350 kcmil nom.) 4-Point U32RT (2) Blue /16 YA36-L2NTC-FX /24 Family (1) 1/2 1-3/ kcmil U34RT (2) Brown / kcmil YA38-L2TC12-FX / /2 1-1/ (500 kcmil nom.) kcmil U38XRT (2) Pink L99 1-7/16 YA38-L2NTC-FX / /2 1-3/ YA40-L2NNT-FX 1 (500 kcmil nom.) 646 kcmil 1600/ /2 1-3/ U39RT (2) Black /16 YA44-L2TC38-FX 1 3/ kcmil Y644HS (1) YA44-L2NTC-FX 1 1/2 1-3/ / Point YA44-L2NT38-FX 1 3/ (750 kcmil nom.) Family (2) YA44-L2NNT-FX 1 1/2 1-3/ U44XRT (2) Yellow L /8 * Use PUADP-1 adaptor with U dies in Y46 HYPRESS. ** The 16 MM 2 referenced here is for both Class 2 and Class 5 conductor. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Canada: BURNDY LLC US:

26 BURNDY Renewable ProductsWind HYDENT TWO HOLE HYLUG FLEX CONDUCTOR LONG BARREL WITH INSPECTION WINDOW TYPE YAZ-FX Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: ELECTRO-TIN PLATED DIE AND COLOR CODE INFORMATION INSPECTION WINDOW B T T T 45 L L CRIMPS CABLE ACCOMMODATION Fig B BEVELED ENTRY 90 L B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length 275/24 W25VT (4) W25VT (4) YAZV252NTCFX 1 1/0 Weld 50 1/2 1-3/ W25RT (4) W25RT (4) U25RT (2) Pink /16 YAZV262NTCFX 1 1/0 AWG X25RT (4) X25RT (4) MY29-11 (2) 325/24 W26VT (4) W26VT (4) Y644HS (1) 2/0 Weld 70 1/2 1-3/ W26RT (4) W26RT (4) 4-Point 2/0 AWG X26RT (4) X26RT (4) Family (2) 450/24 W27VT (4) W27VT (4) U26RT (2) Black /16 YAZV272TC14E2FX 1 3/0 Weld 95 1/4 3/ W27RT (4) W27RT (4) U27RT (2) Orange /16 3/0 AWG X27RT (4) X27RT (4) YAZV282NTCFX 1 550/24 W28VT (4) W28VT (4) ** 4/0 Weld 1/2 1-3/ W28RT (4) W28RT (4) 4/0 AWG 120 X28RT (6) X28RT (6) U28RT (2) Purple /16 YAZ302TC38FX Flex W29RT (4) W29VT (4) CLASS G 259 STR. 3/ W29VT (4) X29RT (8) CLASS H 427 STR. X29RT (8) U29RT (2) Yellow /16 YAZ312TC14E2FX Flex W30VT (4) 637/ /4 3/ Y644HS (1) W30VT (4) W30RT (4) CLASS I, K, M 4-Point U30RT (4) White /16 YAZ342NTCFX kcmil Family (2) W32VT (4) 925/ /2 1-3/ W32VT (4) W32RT (4) (350 kcmil nom.) U32RT (4) Blue /16 YAZ362TC38FX / kcmil 3/ U34RT (4) Brown /4 YAZ382NNTFX kcmil 1/2 1-3/ / U38XRT (4) Pink L99 2-7/8 YAZ382NTCFX 1 (500 kcmil nom.) 1/2 1-3/ YAZ402NTCFX kcmil Y644HS (1) 1600/24 1/2 1-3/ Y644MBH (1) 650 kcmil Flex U39RT (4) U39RT (4) Black 24 3 YAZ442NNTFX 750 Flex 7.09 YAZ442NTCFX /24 Str. 3/ U44XRT (4) Yellow L /16 YAZ442NT38FX kcmil 6.08 * Use PUADP-1 adaptor with U -dies in Y46 HYPRESS. ** The MM 2 conductor size referenced here is for both Class 2 and Class 5 conductor. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connecotrs. For nest/indentor system contact factory. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

27 HYDENT BURNDY Renewable ProductsWind TWO HOLE HYLUG FLEX CONDUCTOR LONG BARREL BELLED END TYPES YA-2TC-FXB, YAV-2TC-FXB Copper Compression Terminal UL Listed 90 C, 600 Volts to 35 kv 45 and 90 angles are available. Please contact Customer Service to order: DIE AND COLOR CODE INFORMATION NO INSPECTION WINDOW ELECTRO-TIN PLATED T L B T Fig L B 45 CABLE ACCOMMODATION T 90 L BELLED END ASSISTS FLEXIBLE WIRE INSERTION CRIMPS B Conductor Installation Tooling Stud Stud Figure Mechanical Hydraulic Wire Fig *** Hole Hole Tongue Dimensions Dieless MD6, OUR840, PAT600, Y35, Y39, Y750, Color Die Strip Catalog Number # AWG MM 2 Size Spacing Width (B) (T) (L) (# of crimps) MD7-34R Y500CTHS Y46*, PAT750 Code Index Length 275/24 W25RT (4) W25RT (4) YAV252N-FXB 1 1/0 Weld 50 1/2 1-3/ W25VT (4) W25VT (4) U25RT (2) Pink /16 1/0 AWG X25RT (4) X25RT (4) 325/24 W26VT (4) W26VT (4) YAV262N-FXB 1 2/0 Weld 70 1/2 1-3/ MY29-11 (2) W26RT (4) W26RT (4) U26RT (2) Black /16 2/0 AWG Y644HS (1) X26RT (4) X26RT (4) 450/24 4-Point W27RT (4) W27RT (4) YAV272N-FXB 1 3/0 Weld 95 1/2 1-3/ Family (2) W27VT (4) W27VT (4) U27RT (2) Orange /16 3/0 AWG X27RT (4) X27RT (4) YAV282TC38-FXB 1 550/24 W28VT (4) W28VT (4) ** 4/0 Weld 3/8 1-3/ W28RT (4) W28RT (4) 120 4/0 AWG X28RT (6) X28RT (6) U28RT (2) Purple /8 550/24 YAV292N-FXB 1 1/2 1-3/ W29VT (4) 4/0 Weld W29VT (4) W29RT (4) X29RT (6) 250 Flex - Class G 259 Str X29RT (6) YA302N-FXB 1 1/2 1-3/ Class H 427 Str. U29RT (2) Yellow /8 YA312N-FXB Flex W30RT (4) 150 1/2 1-3/ W30VT (4) 637/24 Class I, K, M Y644HS (1) W30VT (4) U30RT (4) White /4 YA322N-FXB 1 775/24 4-Point W31RT (4) 185 1/2 1-3/ W31VT (4) kcmil Family (2) W31VT (4) U31RT (4) Red /4 925/24 YA342N-FXB kcmil 240 1/2 1-3/ W32VT (4) W32VT (4) U32RT (4) Blue /16 (350 kcmil nom.) W32RT (4) 1325/24 YA382N-FXB kcmil 300 1/2 1-3/ U38XRT (4) Pink L99 3-3/16 YA402N-FXB 1 (500 kcmil nom.) 1600/ kcmil 400 1/2 1-3/ U39RT (4) Black / /24 Y644HS (1) YA442N-FXB kcmil 500 1/2 1-3/ U44XRT (4) Yellow L /16 4-Point (750kcmil nom.) Family (3) 2750/24 YA462N-FXB kcmil 1/2 1-3/ P45RT (4)** Yellow /16 (1000 kcmil nom.) Consult cable manufacturers for stress relief instructions. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. * Use PUADP-1 adaptor with U -dies in Y46 HYPRESS. ** The MM 2 conductor sizes referenced here are for both Class 2 and Class 5 conductors. *** The MM 2 conductor sizes listed are the recommendations for Class 5 conductor. P-RT die sets for use in Y46 HYPRESS only, PUADP-1 adapter not required. Note: All dimensions shown are for reference only. See tooling section of this catalog for complete tool and die listings. Use ONLY color-coded die recommendations for -FX connectors. Consult shielded cable manufacturers for stress relief instructions. Canada: BURNDY LLC US:

28 BURNDY Renewable ProductsWind HYDENT E-LINE HYLUG EQUIPMENT LINE TYPE YA-E Copper and Aluminum Compression Terminal UL Listed 90 C, 600 Volts to 35 kv Fig. 1 Fig. 2 YA-E Equipment terminals are designed to provide replacements for original equipment mechanical or other compression terminals. These narrow tongue terminals are specially designed to fit in tight areas. Whether you re upgrading or replacing, YA-E connectors will provide for any of your cable termination needs. When installed with our dieless tool, these terminals can accommodate a range of conductor sizes. COPPER E-LINE HYLUG COMPRESSION TERMINALS Installation Tooling Conductor Accommodations Mechanical Hydraulic Copper Only Bolt Tongue Y35, Y750, Y46*, Wire Catalog Fig Conventional Expanded Wire Range Bolt Hole Width Dimensions Dieless MD6, MD7 PAT750 Color Die Strip Number No. Wire Size using Y644M Size Spacing (max) B T L (number of crimps) (number of crimps) (number of crimps) Code Index Length YA25LN50T14E 1 1/ Y644HS (1) W25RT (2) U25RT (1) 12 1/0 AWG #6-1/0 AWG Pink YA25LN64T516E 1 5/ PAT644HS (1) W25VT (2) U2CABT (1) /16 YA26LN50T14E 1 2/0 AWG #4-2/0 AWG 1/ Y81KFT (1) W26RT (2) Y81KFTMBH (1) W26VT (2) PAT81KFT-18V (1) U26RT (1) Black 13 1 U30RT (2) 17 YA30L24N100T38E kcmil 2/0 AWG kcmil 3/ Y644HS (1) W30RT (2) White 1-1/16 U28ART (2) 298 PAT644HS (1) YA342LNN119T12E 2 1/ U34RT (2) Y81KFT (2) 20 YA342LNN131T12E kcmil 4/0 AWG kcmil 1/ U31ART (2) Brown 1-5/16 Y81KFTMBH (2) 299 YA34L6N131T12E 1 1/ P34RT (2) PAT81KFT-18V (2) YA39L6N131T12E kcmil kcmil 1/ U39RT (2) Black /2 ALUMINUM E-LINE HYLUG COMPRESSION TERMINALS Installation Tooling Conductor Accommodations Mechanical Hydraulic Aluminum Copper or Aluminum Bolt Tongue Y35, Y750, Y46*, Wire Catalog Fig Conventional Expanded Wire Range Bolt Hole Width Dimensions Dieless MD6, MD7, Y500CT PAT750 Color Die Strip Number No. Wire Size using Y644M Size Spacing (max) B T L (number of crimps) (number of crimps) (number of crimps) Code Index Length YA8CA3S56T14E 1 #8 AWG #8 AWG 1/ Y644HS (1) U8CABT (1) Blue /16 YA2CA1S91T516E 1 #2 AWG #6 - #2 AWG 5/ PAT644HS (1) Y81KFT (1) U2CABT (1) Pink /16 YA25A1S60T516E 1 5/ Y81KFTMBH (1) 1/0 AWG #1-1/0 AWG YA25A3N69T38E 1 3/ PAT81KFT-18V (1) U25ART (1) Tan /8 YA27A10S76T516E 1 3/0 AWG #1-3/0 AWG 5/ U27ART (2) Ruby /16 YA30A9N100T516E 1 5/ Y644HS (1) YA30A6N100T38E kcmil 2/0 AWG kcmil 3/ PAT644HS (1) U30ART (2) Blue /8 YA30A1N131T12E 1 1/ Y81KFT (2) YA31A11N100T516E 1 5/ Y81KFTMBH (2) 350 kcmil 3/0 AWG kcmil YA31A9N100T38E 1 3/ PAT81KFT-18V (2) U31ART (2) Brown /8 YA32A8N106T516E kcmil 4/0 AWG kcmil 5/ U32ART (4) Green /16 YA34A8N131T38E 1 3/ YA34A3N131T12E kcmil 4/0 AWG kcmil 1/ Y644HS (2) YA34A7N131T12E 1 1/ PAT644HS (2) 1-11/16 YA36A9N131TD12E 1 1/ Y81KFT (3) U34ART (4) Pink kcmil kcmil YA36A3N131TD12E 2 1/ Y81KFTMBH (3) YA39A5N131TD12E ** kcmil Aluminum 1/ PAT81KFT-18V (3) 750 kcmil YA39A1N131TD12E kcmil Copper Only 1/ /16 A variety of BURNDY installation tools are available and not all tools are listed. If you require additional tooling information, please feel free to call our customer service department for other recommendations. * Use PUADP-1 adapter with U dies in Y46 HYPRESS, P-RT die sets for use in Y46 HYPRESS only. PUADP-1 adapter not required. Note: All dimensions shown are for reference only. ** 900 Compact Aluminum Cable use Y644HS and PAT644 dieless tools only. US: BURNDY LLC Canada:

29 HYDENT BURNDY Renewable ProductsWind TYPE YAV HYLUG for Metric Conductor Non-Insulated Copper Tubular Terminals mm 2 Made from electrolytic copper tube, electro tinned. Range of copper tube formed terminals taking wires from mm 2. Heat resistant up to +125 C. Mechanical Tools Hydraulic Tools Catalog Stud Pack Tooling Y29BH Y35BH Number mm 2 Size d y b c Øk Qty. Number MRD29 Y29NC Y35 Y644M YAV18T YAV18T YAV18T Y10R4BY YAV YAV025M YAV14T Y10R4BY YAV04M Y10R4BY YAV06M YAV06M YAV06M YAV06M Y10R4BY YAV06M YAV10T YAV06FM6 Flex Y10R4BY N I N I YAV10M YAV10M Y10R4BY YAV10M MY2913GE2 YAV10M YAV16M YAV16M YAV16M MY2913GE2 YAV16M YAV25M YAV25M YAV25M MY2913GE2 YAV25M N = Nest die, I = Indentor Note: All dimensions shown are for reference only. DV4L DV6L DV8L Y29PL U25C U16C U10C Y35P1 + Y29PQS (Y29PQ10B1 UK) Dieless Photo by Roger Ferguson Down Tower Terminations Canada: BURNDY LLC US:

30 BURNDY Renewable ProductsWind HYDENT TYPE YS HYLINK SPLICE - LONG BARREL Copper Compression Splice UL Listed 90 C, 600 Volts to 35 kv DIE AND COLOR CODE INFORMATION ELECTRO-TIN PLATED CRIMP CRIMP BEVELED ENTRY CRIMP CRIMP (4) CENTER WIRE STOPS Features and Benefits Long barrel length. Ideal for 600 volt heavy duty applications. Also may be used at higher voltages up to 35kV. Four (4) center conductor stops. Provides a center wire stop for proper conductor insertion. High pull out force. Provides added security for much greater mechanical and electrical properties. Conductor Dimensions Installation Tooling Mechanical Y35, Y39, Y750, Y46* Wire Catalog *** Dieless Y1MRTC MD6 Die Number Color Die Index Strip Number AWG MM 2 L B (# of crimps) Y2MR MD7-34R OUR840 (# crimps) Code & Embossment Length YS4C 4 str Point Y2MR (4) Famly (1) Y1MRTC (4) W4CVT (2) X4CRT (2) U4CRT (2) Gray 8 or /16 YS2C 2 str Y2MR (4) Y1MRTC (4) W2CVT (2) X2CRT (2) U2CRT (2) Brown /16 YS1C 1 str Y1MRTC (4) W1CVT (2) X1CRT (2) U1CRT-1 (2) Green 11 or /16 YS25 1/0 str Point W25VT (4) X25RT (4) U25RT (2) Pink 12 or /16 YS26 2/0 str Famly (2) W26VT (4) X26RT (4) U26RT (2) Black /16 YS27 3/0 str W27VT (4) X27RT (4) U27RT (2) Orange /16 YS28 4/0 str W28VT (4) X28RT (4) U28RT (2) Purple /16 YS kcmil W29VT (4) U29RT (2) Yellow /16 YS kcmil W30VT (4) U30RT (4) White 17 or /16 4-Point YS kcmil W31VT (4) U31RT (4) Red 18 or /16 Famly (3) YS kcmil W32VT (4) U32RT (4) Blue 19 or /16 YS kcmil W34VT (4) U34RT (4) Brown 20 or /16 YS kcmil Point U36RT (4) Green 22 or /4 YS kcmil Famly (4) U39RT (4) Black /16 YS kcmil P44RT** (2) White /16 YS kcmil P46RT** (6) Green /4 ➀ Not color coded. * Use PUADP-1 adapter with U dies in Y46 HYPRESS. ** P44RT for use with Y46 HYPRESS only. PUADP-1 adapter not required. *** The MM 2 conductor sizes listed are the recommendations for Class 2 conductor. The maximum size for the Y35 is 400 kcmil. See tooling section of this catalog for complete tool and die listings. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instuctions. Requires Y60BHU HYPRESS with L48RT die set. Note: All dimensions shown are for reference only. US: BURNDY LLC Canada:

31 HYDENT BURNDY Renewable ProductsWind TYPES YA-A AND YA-A-TN HYLUG Uninsulated Aluminum Compression Terminal for Aluminum and Copper Conductors 1-Hole Design UL Listed 90 C, 600 Volts to 35 kv Type YA-A aluminum tin-plated compression HYLUG terminals are dual-rated and designed for use on both aluminum and copper conductors from #12 sol. through 2000 kcmil. They are designed for heavy duty applications to 35KV. YA-A terminals are prefilled with PEN- ETROX, and assembled with color-coded end caps. Available with one, two, and fourhole NEMA tongues, the aluminum HYLUG terminals are designed for a permanent trouble-free electrical termination. DIE AND CRIMP INFORMATION CLOSED BARREL ELECTRO-TIN PLATED COLOR CODED END CAP CRIMP Features and Benefits CRIMP CABLE ACCOMMODATION Manufactured from high conductivity, wrought aluminum with heavy duty wall thickness. Provides maximum conductivity, low resistance and ductility for an excellent combination of electrical and crimp forming properties. Electro-tin plated. Provides durable long lasting corrosion resistance. Internally bevelled barrel. Provides easy cable insertion. Meets UL486B 90 C requirements. Provides a quality electrical dual connection. Connector is clearly marked with wire size, die index, color-code and the proper number and location of crimps. Provides easy identification and tooling recommendation for a proper compression which forms a homogeneous mass resulting in an excellent electrical connection. Factory prefilled with PENETROX oxide inhibiting compound. Oxide inhibiting compound contains homogeneously suspended metallic particles to penetrate the wires' oxides, establish electrical continuity and forms an airtight connection. Color-coded end caps inserted in barrel end. Prevents foreign materials from entering and contaminating the connector prior to usage plus identifies the proper colorcoded die for a reliable connection. Dimensions Installation Tooling Dieless (# of crimps) Y35, Y39, Y750, Y46* Wire Catalog Code Stud No. of T Z Mechanical Hydraulic Die Number Color Die Strip Number Conductor Size Holes in Pad C D L N Ref. Min. Tooling HYPRESS (# of crimps) Code Index Length YA29A1 250 kcmil 1/ Y644HS (1) 4-Point U29ART (2) Red /8 YA30A1 300 kcmil 1/ Family (2) U30ART (2) Blue /4 Y644HS (1) YA31A1 350 kcmil 1/ Point U31ART (2) Brown /8 Family (3) YA34A1 500 kcmil 5/ U34ART (4) Pink /8 Y644HS (1) YA36A1 600 kcmil 5/ U36ART (4) Black /8 4-Point YA39A1 700/750 kcmil 1/ Family (4) YA39A3 900 Compact AL + 5/ U39ART-2 (4) Yellow /8 YA44A kcmil 5/ P44ART** (4) Brown Contact BURNDY for conductor, stud sizes and hole drillings not shown. See tooling section of this catalog for complete tool and die listings. Y644HS DIELESS HYPRESS RANGE-TAKING CAPABILITIES The following size HYDENT lugs and two way splices, when crimped with the Y644HS DIELESS HYPRESS tool, produce the following range taking capabilities: * Use PUADP-1 adaptor with U dies in Y46 Hypress. ** P44ART for use with Y46 HYPRESS only. PUADP-1 adapter not required. + Use with Y644HS and PAT644 dieless tools only. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Aluminum Connectors Standard Expanded Standard Expanded Standard Expanded Wire Size Wire Range Wire Size Wire Range Wire Size Wire Range #6 AWG #6 AWG 1/0 AWG 1/0 - #1 AWG 250 kcmil 250 kcmil - 1/0 AWG #4 AWG #4 - #6 AWG 2/0 AWG 2/0 - #1 AWG 300 kcmil 300 kcmil AWG #2 AWG #2 - #6 AWG 3/0 AWG 3/0 - #1 AWG 350 kcmil 350 kcmil - 3/0 AWG #1 AWG #1 - #2 AWG 4/0 AWG 4/0 - #1 AWG 400 kcmil 400 kcmil - 4/0 AWG 500 kcmil 500 kcmil - 4/0 AWG 600 kcmil kcmil 750 kcmil kcmil Canada: BURNDY LLC US:

32 BURNDY Renewable ProductsWind HYDENT TYPE YA-A HYLUG Uninsulated Aluminum Compression Terminal for Aluminum and Copper Conductors 2-Hole and 4-Hole Designs UL Listed 90 C, 600 Volts to 35 kv (2) HOLE DRILLING ELECTRO-TIN PLATED DIE AND CRIMP INFORMATION CLOSED BARREL CABLE ACCOMMODATION COLOR CODED END CAP CRIMPS BEVELED ENTRY Type YA-A 2- and 4-hole pads inhibit connector rotation and increase area contact. These aluminum terminals have the same design features and benefits as the 1-hole YA-A with an added stud hole for a more secure termination to various types of equipment pads. They are dual-rated for use on both aluminum and copper conductors. Dimensions Installation Tooling No. of E Dieless (# of crimps) Y35, Y39, Y750, Y46* Wire Catalog Code Stud Holes & T Z Mechanical Hydraulic Die Number Color Die Strip Number Conductor Size in Pad C D F L N Ref. Min. Tooling HYPRESS (# of crimps) Code Index Length Y644HS (1) YA25A7 1/0 Str. 1/2 2-NEMA MY29-3 (1) 4-Point U25ART (1) Tan /16 Family (2) YA26A3 2/0 Str. 1/2 2-NEMA U26ART (2) Olive /8 YA27A5 3/0 Str. 1/2 2-NEMA Y644HS (1) U27ART (2) Ruby /2 YA28A5 4/0 Str. 1/2 2-NEMA MY29-3 (2) 4-Point U28ART (2) White /8 YA29A3 250 kcmil 1/2 2-NEMA Family (2) U29ART (2) Red /8 YA30A3 300 kcmil 1/2 2-NEMA U30ART (2) Blue /4 Y644HS (1) YA31A3 350 kcmil 1/2 2-NEMA Point U31ART (2) Brown /8 Family (3) YA34A3 500 kcmil 1/2 2-NEMA U34ART (4) Pink /8 Y644HS (1) YA36A3 600 kcmil 1/2 2-NEMA U36ART (4) Black /8 4-Point YA39A5 700/750 kcmil 1/2 2-NEMA U39ART-2 (4) Yellow /8 Family (4) YA39AM2 900 Compact AL + 1/2 2-NEMA P39ART** (4) Red /8 YA44A kcmil 1/2 2-NEMA P44ART** (4) Brown YA45A kcmil 1/2 2-NEMA P44ART** (4) Brown YA46A kcmil 1/2 2-NEMA L46ART (2) Red /4 YA46A kcmil 1/2 4-NEMA Contact BURNDY or conductor, stud sizes and hole drillings not shown. See tooling section of this catalog for complete tool and die listings. Use Y60 BHU HYPRESS with L46ART and L48ART die sets. 90 C Rated. * Use PUADP-1 adaptor with U dies in Y46 HYPRESS. ** P39ART and P44ART die sets for use with Y46 HY- PRESS only. PUADP-1 adapter not required. + Use with Y644HS and PAT644 dieless tools only. For applications greater than 2000 Volts consult cable manufacturer for voltage stress relief instructions. Note: All dimensions shown are for reference only. Photo by Jim Moreland Transformer Terminations US: BURNDY LLC Canada:

33 HYDENT BURNDY Renewable ProductsWind TYPE YS-A HYLINK Uninsulated Aluminum Compression Splice UL Listed 90 C, 600 Volts to 35 kv Type YS-A is a high-conductivity aluminum tin-plated compression butt splice for use on all combinations of aluminum to aluminum, aluminum to copper, and copper to copper conductor combinations. They are designed to accommodate conductors from #12 str. through 1,000 kcmil in standard and heavy duty applications. Prefilled with PENETROX oxide inhibiting compounds and assembled with color-coded end caps, the connectors provide a permanent trouble-free electrical splice with flexibility and low installed cost. ELECTRO-TIN PLATED BELLED END DIE AND COLOR CODE INFORMATION CRIMP (4) CENTER WIRE STOP Features and Benefits CRIMP BELLED END Manufactured from high-conductivity wrought aluminum with heavy duty wall thickness. Provides high-conductivity/low resistance and ductility for an excellent combination of electrical and crimp forming properties. Electro-tin plated. Provides durable long lasting corrosion resistance. Internally bevelled barrel. Provides easy cable entry. Solid center stop and prefilled with PENETROX oxide inhibiting compound. Provides stop for proper conductor insertion and an aid in forcing the PENETROX between the individual wire strands. Color-coded end caps. Provides easy wire size and die code identification plus prevents foreign materials from entering and contaminating the connector prior to usage. Connector is clearly marked with wire size, die index and the proper number and location of crimps. Provides easy identification and tooling recommendation. Proper compression forms a homogeneous mass resulting in an excellent electrical connection. Installation Tooling Y35, Y39, Y750, Y46* Dieless (# of crimps/end) Die Number Die Index & Wire Catalog Code Dimensions Mechanical Hydraulic (# of crimps Color Embossment Strip Number Conductor B L HYTOOL HYPRESS per end) Code Length Y644HS (1) YS29A1 250 kcmil U29ART (2) Red /8 Y81KFT (2) MY29-3 (2) Y81KFTMBH (2) YS30A1 300 kcmil U30ART (2) Blue /4 PAT81KFT-18V (2) Y644HS (1) YS31A1 350 kcmil Y81KFT (3) Y81KFTMBH (3) U31ART (2) Brown /8 PAT81KFT-18V (3) YS32A1 400 kcmil U32ART (4) Green /2 YS34A1 500 kcmil Y644HS (1) U34ART (4) Pink /8 YS36A1 600 kcmil Point U36ART (4) Black /8 YS39A1* 900 Compact AL Family (4) U39ART-2 (4) Yellow /8 YS44A kcmil P44ART** (4) Brown YS45A kcmil P48PR1/L44ART** (6) Brown /8 YS46A kcmil L46ART*** (2) Blue /8 See tooling section of this catalog for complete tool and die listings. UL Listed for Aluminum only. Not CSA Certified. * Use PUADP-1 adaptor with U dies in Y46 HYPRESS. ** P39ART and P44ART for use with Y46 HYPRESS only. PUADP-1 adapter not required. The largest size for the Y35 is 400 kcmil. *** Y60BHU only. 90 C Rated. Use Y644HS and PAT644 dieless tools only. Also accommodates compressed and compact conductors. (Except 700 kcmil in 750 kcmil barrel.) Note: All dimensions shown are for reference only. Canada: BURNDY LLC US:

34 BURNDY Renewable ProductsWind HYDENT 12-TON U DIES* BURNDY Die Sets Fits Y35, Y39, Y750HSXT, PAT750XT-18V, PAT46-18V, Y46 (w/puadp-1 Adapter) Wire Size Copper Aluminum Small #8 U8CRT U8CABT #6 U5CRT U6CABT #4 U4CRT U4CABT #3 U3CRT N/A #2 U2CRT U2CABT #1 U1CRT-1 U1CART 1/0 U25RT U25ART 2/0 U26RT U26ART 3/0 U27RT U27ART 4/0 U28RT U28ART 250 kcmil U29RT U29ART 300 kcmil U30RT U30ART 350 kcmil U31RT U31ART 400 kcmil U32RT U32ART 500 kcmil U34RT U34ART 535 Flex kcmil U38XRT N/A 600 kcmil U36RT U36ART 750 kcmil U39RT U39ART-2 Large 777 Flex U44XRT N/A U die case Part# PT29291, holds up to 15 dies * Non-tension U-type 12-ton dies for YA, YS, YA-A, YS-A style connectors. NOTE: N/A = not applicable. W DIES BURNDY Die Sets Fits MD6, MD7, Y500CTHS, PAT600-18V, PATMD6-14V Wire Size Copper Aluminum Small #8 W8CVT X8CART #6 W5CVT W161 #4 W4CVT W162 #3 W3CRT N/A #2 W2CVT W239 #1 W1CVT W163 1/0 W25VT W241 2/0 W26VT W245 3/0 W27VT W166 4/0 W28VT W *W29VT N/A 300 *W30VT N/A 350 *W31VT *W31ART 400 *W32VT N/A 500 *W34VT N/A Large 600 **W36RT N/A W die case Part# PT4946, holds up to 12 dies * These sizes ( ) for Y500CTHS, MD7-34(R), BAT500, BCT500 only. ** For PAT600-18V only. NOTE: N/A = not applicable. Suitable for use on YA, YS, YA-A, YS-A type non-tension connectors. US: BURNDY LLC Canada:

35 HYDENT BURNDY Renewable ProductsWind INSTALLATION TOOLING SYSTEM Lugs & Splices Taps Taps Taps One & Two T&B Thin-Wall C-taps Heavy Duty C-Taps H-Taps Conductor Hole Index Run=Tap, AWG only Run=Tap Run=Tap Code AWG Flex Die Color Index (Flex) Die Color Index Die Color Index Die Color Index #8/#6 W8CVT #8 sol. U8CRT RED W4CVT GRAY 8 U240 RED 240 U11T-1 GREEN 11 #6 #6 W5CVT U5CRT BLUE 7 24 W2CVT BROWN 10 UC BROWN C UBGRT ORANGE BG #4 #4 W4CVT U4CRT GRAY 8 29 W25VT PINK 12 UC BROWN C UC BROWN C #3/#2 W3CRT sol. U3CRT WHITE 9 W26VT BLACK 13 UC BROWN C UC BROWN C #2 #2 W2CVT U2CRT BROWN W27VT ORANGE 14 UC BROWN C UC BROWN C #1 #1 W1CVT U1CRT-1 GREEN 11 W28VT PURPLE 15 U997 ORANGE 997 U654 PURPLE 654 1/0 1/0 W25VT 42 PINK 12 U25CRT (45) W29VT YELLOW 16 U997 ORANGE 997 U654 PURPLE 654 2/0 2/0 Refer W26VT 45 BLACK 13 to U26RT (50) Catalog U997 ORANGE 997 U654 PURPLE 654 3/0 3/0 W27VT U27RT ORANGE 14 U997 ORANGE 997 U654 PURPLE 654 4/0 4/0 W28VT 54 PURPLE 15 U28RT (62) U997 ORANGE 997 U654 PURPLE 654 4/0/ W29VT class U29RT YELLOW 16 U997 ORANGE 997 U654 PURPLE G & H 262/ 250 W30VT class I, K & M U30RT WHITE 17 U1104 BROWN 1104 U1104 BROWN W31VT U31RT RED U1104 BROWN 1104 U1104 BROWN / W32VT 373 U32RT BLUE 19 U1104 BROWN 1104 U1104 BROWN W34VT U34RT BROWN U1104 BROWN 1104 U1104 BROWN / 535 U38XRT PINK L99 P1103 BLUE 1103 PYFR YELLOW KR 600 U36RT GREEN 22 (99) P1103 BLUE 1103 PYFR YELLOW KR 700 U38RT PINK 400 P1103 BLUE 1103 PYFR YELLOW KR U39RT BLACK P1103 BLUE 1103 PYFR YELLOW KR 750/ U44XRT 777 P44XRT-1 YELLOW L P40RT ORANGE 25 (115) P1102 WHITE 1102 PYFR YELLOW KR 1000 P44RT WHITE 27 P1102 WHITE 1102 PYFR YELLOW KR Canada: BURNDY LLC US:

36 BURNDY Renewable ProductsWind PENETROX PENETROX HOW TO INSTALL CONNECTORS: 1. Select the right connector. Always use an aluminum connector for aluminum or copper conductor. And choose a connector that's marked for the wire size you're using. Never use a copper connector on aluminum conductor. 2. Strip carefully. Remove the insulation without nicking the wire. 3. Brush thoroughly. Always wire-brush the stripped portion of the wire. An unplated terminal pad, and the surface to which the terminal will be attached should also be wire-brushed. 4. Apply PENETROX For mechanical connectors, apply PENE - TROX joint compound liberally to the conductor to prevent the formation of surface oxides once the connection is made. Also apply PENETROX to any terminal pad. 5. Tighten completely. For mechanical connectors, use wrench or screwdriver to securely tighten the aluminum connectors, as recommended by BURNDY. 6. Crimp. For compression connectors, choose the right die and the right tool. Insert the wire completely and make the recommended number of crimps. BURNDY takes the guesswork out of aluminum connections because the connectors and crimp dies are color coded. Crimps can be easily located between marks. ORDERING INFORMATION Catalog Number Container Container PENETROX A PENETROX A-13 PENETROX E PENETROX HT Type Size PENA 1/2 Tube 1/2 oz. PEN A-4 PEN A13-4 PEN E-4 PENHT-4 Squeeze Bottle 4 oz. P8A PEN A13-8 PEN E-8 PENHT-8 Squeeze Bottle 8 oz. * 1 lb. cartridge will fit standard caulking guns. US: BURNDY LLC Canada:

37 Hardware BURNDY Renewable ProductsWind DURIUM BOLT SILICON BRONZE BURNDY introduced silicon bronze bolts, nuts, and other hardware items on outdoor connector applications in Today the DURIUM trademark is a standard for this use. DURIUM bolts combine high strength with corrosion resistance. Bolts up to 2 inches long are fully threaded; longer bolts are threaded for two inches. Heads have Amer- ican Standard dimension, and the threads are per American National Coarse Series, Class #2 fit. The silicon bronze is per ASTM B99. Thread B Thread B Thread B Catalog Number Size Length Catalog Number Size Length Catalog Number Size Length 25x50 HEB BOX 1/4-20 1/2 38x125 HEB BOX 3/ /4 50x300 HEB BOX 1/ x62 HEB BOX 1/4-20 5/8 38x150 HEB BOX 3/ /2 50x325 HEB BOX 1/ /4 25x75 HEB BOX 1/4-20 3/4 38x175 HEB BOX 3/ /4 50x350 HEB BOX 1/ /2 25x100 HEB BOX 1/ x200 HEB BOX 3/ x375 HEB BOX 1/ /4 25x125 HEB BOX 1/ /4 38x225 HEB BOX 3/ /4 50x400 HEB BOX 1/ x150 HEB BOX 1/ /2 38x250 HEB BOX 3/ /2 50x450 HEB BOX 1/ /2 25x200 HEB BOX 1/ x275 HEB BOX 3/ /4 50x500 HEB BOX 1/ x250 HEB BOX 1/ /2 38x300 HEB BOX 3/ x550 HEB BOX 1/ /2 25x300 HEB BOX 1/ x325 HEB BOX 3/ /4 50x600 HEB BOX 1/ x50 HEB BOX 5/ /2 38x350 HEB BOX 3/ /2 62x100 HEB BOX 5/ x62 HEB BOX 5/ /8 38x400 HEB BOX 3/ x125 HEB BOX 5/ /4 31x75 HEB BOX 5/ /4 38x450 HEB BOX 3/ /2 62x150 HEB BOX 5/ /2 31x100 HEB BOX 5/ x500 HEB BOX 3/ x175 HEB BOX 5/ /4 31x125 HEB BOX 5/ /4 44x150 HEB BOX 7/ /2 62x200 HEB BOX 5/ x150 HEB BOX 5/ /2 44x200 HEB BOX 7/ x225 HEB BOX 5/ /4 31x175 HEB BOX 5/ /4 50x75 HEB BOX 1/2-13 3/4 62x250 HEB BOX 5/ /2 31x200 HEB BOX 5/ x100 HEB BOX 1/ x275 HEB BOX 5/ /4 31x250 HEB BOX 5/ /2 50x125 HEB BOX 1/ /4 62x300 HEB BOX 5/ x300 HEB BOX 5/ x150 HEB BOX 1/ /2 62x325 HEB BOX 5/ /4 38x50 HEB BOX 3/8-16 1/2 50x175 HEB BOX 1/ /4 62x350 HEB BOX 5/ /2 38x62 HEB BOX 3/8-16 5/8 50x200 HEB BOX 1/ x400 HEB BOX 5/ x75 HEB BOX 3/8-16 3/4 50x225 HEB BOX 1/ /4 62x450 HEB BOX 5/ /2 38x88 HEB BOX 3/8-16 7/8 50x250 HEB BOX 1/ /2 62x500 HEB BOX 5/ x100 HEB BOX 3/ x275 HEB BOX 1/ /4 62x600 HEB BOX 5/ Canada: BURNDY LLC US:

38 BURNDY Renewable ProductsWind Hardware DURIUM NUT SILICON BRONZE DURIUM hexagon regular nuts are nonmagnetic and are made to American Standard dimensions. American National Coarse Series threads, #2 fit. Catalog Number Thread Size 25C HEN BOX 1/ C HEN BOX 5/ C HEN BOX 3/ C HEN BOX 7/ C HEN BOX 1/ C HEN BOX 5/8-11 DURIUM FLAT WASHER SILICON BRONZE High strength DURIUM Flat Washers are non-magnetic and free from galvanic action when in contact with copper. Conforms to SAE standards. For Bolt Nominal Dimensions in Inches Catalog Number Size A B 25 FW BOX 1/4 1/16 5/8 31 FW BOX 5/16 1/16 11/16 38 FW BOX 3/8 1/16 13/16 44 FW BOX 7/16 1/16 15/16 50 FW BOX 1/2 3/32 1-1/16 62 FW BOX 5/8 3/32 1-5/16 DURIUM SPLIT LOCKWASHER SILICON BRONZE DURIUM spring type lockwasher has high resiliency and exerts constant pressure on the face of the nut, preventing vibration from loosening the nut. DURIUM INTERNAL TOOTH LOCKWASHER SILICON BRONZE Catalog Number For Bolt Size 25 SW BOX 1/4 31 SW BOX 5/16 38 SW BOX 3/8 44 SW BOX 7/16 50 SW BOX 1/2 62 SW BOX 5/8 Catalog Number For Bolt Size 25 NW BOX 1/4 31 NW BOX 5/16 38 NW BOX 3/8 44 NW BOX 7/16 50 NW BOX 1/2 62 NW BOX 5/8 DURIUM Internal Tooth Lockwashers are available as illustrated. The teeth are twisted slightly and present biting edges which grip the nut and the part being clamped, preventing the nut from backing off. US: BURNDY LLC Canada:

39 Hardware BURNDY Renewable ProductsWind HARDWARE DATA Recommended Tightening Torque The hardware used in connectors must be compatible with the connector material, have high mechanical strength and be corrosion resistant. Copper alloy connectors have hardware made of DURIUM, which is BURNDY's trade name for silicon bronze alloy ASTMB99. This material was first introduced by BURNDY in 1927 for use in outdoor construction, and today, is the standard throughout the industry. Bolt Size Steel Hardware Recommended Torque (Inch Pounds) Aluminum connectors generally have aluminum alloy hardware. The bolts are 2024T4 and anodized to resist corrosion. The nuts are 6061T6, which is resistant to corrosion and does not require anodizing. Bolts are Bolt Size Aluminum Hardwar e Recommended Torque (Inch Pounds) 1/ / / / / / / / / lubricated to eliminate galling and to provide consistent clamping forces. To reduce or greatly exceed the recommended torque can adversely affect the performance of the connector. DURIUM (Silicon Bronze) Hexagonal Bolt Data ➁ CATALOG NO. SERIES "A" (BOLT SIZE) "B" "C" "D" RECOMMENDED TORQUE (in-lb) MIN. BREAKING FORCE (lb) MIN. SHEARING FORCE (lb) 25X _HEB 1/4-20 UNC 7/ , X _HEB 5/16-18 UNC 1/ ,930 1,640 38X _HEB 3/8-16 UNC 9/ ,350 2,430 50X _HEB 1/2-13 UNC 3/ ,950 4,460 62X _HEB 5/8-11 UNC 15/ ,700 7,100 75X _HEB 3/4-10 UNC 1-1/ ,510 10, Material: DURIUM (Silicon Bronze) ➁ " _" is substituted for bolt length. Consult sales representative for available lengths. ➂ These torque values develop maximum bolt preload. 4. This drawing is based on BURNDY engineering spec. RECOMMENDED TERMINATION HARDWARE These are the two most common methods of hardware installation. ➂ Canada: BURNDY LLC US:

40 BURNDY Renewable ProductsWind Heat Shrink TYPE HS-H-PF Heavy Wall Heat Shrink Tubing Cross-Linked Polyolefin Cut Lengths And 4 Foot Sticks Type HS-H-PF is a heavy wall, flame retardant heat shrink tubing made of cross-linked polyolefin. The shrink ratio is 3:1, and the inside diameter is coated with an adhesive sealant to protect against moisture and corrosion. UL486D Listed for direct burial applications. Accommodates #14 AWG kcmil conductors. Operating temperatures from 55 C to 135 C with a shrink temperature of 120 C. Meets MIL-I-23053/ KV Nominal Min. Max. Nom. Wall Number Catalog Diameter Exp. Recov. Thickness Conductor of Pieces Number Length Inches ID In. ID In. In. Range Per Package HSB35H3PF # HSB35H6PF # HSB35H48PF # HSB34H6PF # HSB34H9PF # HSB34H48PF #6-2 5 HSB110H6PF #1-3/0 5 HSB110H9PF #1-3/0 5 HSB110H48PF #1-3/0 5 HSB150H9PF / HSB150H12PF / HSB150H48PF / HSB200H9PF HSB200H12PF HSB200H48PF Available in black only. Photo by Jim Moreland Transformer Terminations US: BURNDY LLC Canada:

41 Heat Shrink BURNDY Renewable ProductsWind TYPE HSIC-FR Heavy Wall Heat Shrinkable End Cap UL Listed to 600 V Type HSIC-FR, Heat Shrink Insulating End Cap Fire Retardant is a heavy wall, fire retardant end cap made of cross-linked thermally stabilized black polyolefin. Used to insulate exposed conductors in energized appli - cations. The 3:1 shrink ratio offers greater range, accommodating copper wire sizes, #8 AWG thru kcmil. Performs effectively over lead, aluminum, steel, polyethylene, EPR, and PVC jacketed materials. Blue thermal chromatic lines disappear indicating correct installation temperature and provide inspectability. I.D. adhesive provides superior moisture and weather resistant characteristics. Features and Benefits Minimum 28 Oxygen index, UL94-VO rated. Self-extinguishing flame retardant properties. 3:1 shrink ratio. Minimum inventory required. Thermal chromatic lines. Indicate proper installation. Low shrink temperature, 150 C. Only requires common hot air gun to apply. Meets sealing requirements: ANSI-C119.1, UL486D Weather and moisture resistant. Internal Wall Diameter Thickness Length Number of Catalog 600V Cable (Min.) (Max.) Rec. 20% Pieces per Number Code Flex Exp. Rec. Exp. 20% Exp. Rec. Package HSIC8-1FR #8 - #1 #8 - # HSIC4-40FR #4-4/0 #4-2/ HSIC10-500FR 1/0-500 kcmil # kcmil HSIC FR 3/ kcmil 2/0-646 kcmil HSIC200FR kcmil kcmil HSIC269FR kcmil HSIC350FR 1250 kcmil (min) Slide the HSIC-FR end cap onto the cable and hold in place using forefinger or thumb. 2. Beginning at closed end apply heat, blue thermochromatic lines will begin to disappear at 150 C. Gradually, move heat source to open end and around cap. Once lines are no longer visible and adhesive flows out of open end, discon tinue heating. 3. HSIC-FR end cap installed on cable. Canada: BURNDY LLC US:

42 BURNDY Renewable ProductsWind Heat Shrink TYPE HSC-FR VISI-SHRINK Fire Retardant Clear Heat Shrink Tubing UL Recognized to 600 V Type HSC-FR is a flexible polyvinyl chloride clear heat-shrink tubing. Excellent flame retardant properties and a 2:1 shrink ratio, the VISI-SHRINK tubing enables inspectors to read die index embossments on installed connectors easily. UL recognized, 105 C, 600V, the operating temperature from 20 C to 105 C with a shrink temperature of 135 C. Features and Benefits UL 224, VW-1 Rated. Self-extinguishing flame retardant properties. Clear Tubing. Allows inspection of die index embossed and shiner after installation is complete. Should any corrosion occur it will be visible during inspection. Low Shrink Temperature. Only requires common hot air guns to apply. Standard Catalog I.D. I.D. After Wall Conductor Range Reel Size Number Expanded Recovery Thickness Code Flex (Feet) HSC18FR #16 - #14 #16 - #14 50 HSC18FR #16 - #14 #16 - # HSC14FR #12 - #8 #12 - #10 50 HSC14FR #12 - #8 #12 - # HSC38FR #6 - #4 #8 - #6 50 HSC38FR #6 - #4 #8 - #6 250 HSC12FR #4 - #1 #6 - #4 50 HSC12FR #4 - #1 #6 - #4 250 HSC34FR /0-3/0 #2-1/0 50 HSC34FR /0-3/0 #2-1/0 250 HSC100FR /0-3/0 1/0-4/0 25 HSC100FR /0-3/0 1/0-4/0 100 HSC112FR HSC112FR HSC200FR HSC200FR NOTES: 1 Shrink temperature is 135 C (275 F). 2 For best results move heat gun along the length of heat shrink to avoid concentrations. 3 To extend useful life, store material below 70 F. US: BURNDY LLC Canada:

43 UNIRAP BURNDY Renewable ProductsWind UNIRAP STANDARD CABLE TIES 18 Lb. Minimum Tensile Strength Standard Maximum Minimum Bulk Package Bundle Tensile Package Catalog Diameter Strength Length Width Installation Tool Catalog Number Material Inches [mm] Lbs. (N) Inches [mm] Inches [mm] Tool Setting Number CT18075C Natural Nylon 6/6 CT18075M.75 [19] 4.00 [102] CT18075C0 Black Nylon 6/6 UV CT18075M0 CT18125C Natural Nylon 6/6 CT18125M 1.25 [32] 18 (80) 5.67 [144].10 [2.5] TWT1, MK7 Mini CT18125C0 Black Nylon 6/6 UV CT18125M0 CT18200C Natural Nylon 6/6 CT18200M 2.00 [51] 8.00 [203] CT18200C0 Black Nylon 6/6 UV CT18200M0 30 Lb. Minimum Tensile Strength Standard Maximum Minimum Bulk Package Bundle Tensile Package Catalog Diameter Strength Length Width Installation Tool Catalog Number Material In. [mm] Lbs. (N) In. [mm] In. [mm] Tool Setting Number CT30125C Natural Nylon 6/6 CT30125M 1.25 [32] 30 (133) 6.00 [152].14 [3.6] TWT1, MK7 Intermediate CT30125C0 Black Nylon 6/6 UV CT30125M0 40 Lb. Minimum Tensile Strength Standard Maximum Minimum Bulk Package Bundle Tensile Package Catalog Diameter Strength Length Width Installation Tool Catalog Number Material Inches [mm] Lbs. (N) Inches [mm] Inches [mm] Tool Setting Number CT40200C Natural Nylon 6/6 CT40200M 2.00 [51] 8.50 [216] CT40200C0 Black Nylon 6/6 UV CT40200M0 CT40300C Natural Nylon 6/6 CT40300M 3.00 [76] 40 (178) [292].15 [3.8] TWT1, MK7 Intermediate CT40300C0 Black Nylon 6/6 UV CT40300M0 CT40400C Natural Nylon 6/6 CT40400M 4.00 [102] [368] CT40400C0 Black Nylon 6/6 UV CT40400M0 50 Lb. Minimum Tensile Strength Standard Maximum Minimum Bulk Package Bundle Tensile Package Catalog Diameter Strength Length Width Installation Tool Catalog Number Material Inches [mm] Lbs. (N) Inches [mm] Inches [mm] Tool Setting Number CT50175C Natural Nylon 6/6 CT50175M 1.75 [44] 8.00 [203] CT50175C0 Black Nylon 6/6 UV CT50175M0 CT50300C Natural Nylon 6/6 CT50300M 3.00 [76] 50 (222) [298].18 [4.6] TWT1, MK7 Standard CT50300C0 Black Nylon 6/6 UV CT50300M0 CT50400C Natural Nylon 6/6 CT50400M 4.00 [102] [394] CT50400C0 Black Nylon 6/6 UV CT50400M0 Canada: BURNDY LLC US:

44 BURNDY Renewable ProductsWind Grounding HYGROUND THE HYGROUND IRREVERSIBLE COMPRESSION SYSTEM BURNDY has developed an irreversible compression ground system which meets the most stringent safety and performance requirements, including those of OSHA and nuclear power plant design. Performance excellence and long life expectancy are the system s basic design guidelines. It is a complete system which consists of connectors for grid cross connections, taps, splices, cable to ground rod, ground plates and terminations. Our irreversible compression ground connectors employ well-proven design principles and technology that have been in existence for over 60 years. Connectors are just one component of our Irreversible Compression Ground System. Installation tooling is also an integral part of this system. BURNDY pioneered the compression connector principle and continues today to be the leader in compression technology. Our tooling package is the most extensive in the industry and affords the user many options. US: BURNDY LLC Canada:

45 Grounding HYGROUND BURNDY Renewable ProductsWind THE HYGROUND IRREVERSIBLE COMPRESSION SYSTEM (Continued) Features and Benefits Irreversible compression. Meets NEC code, section 250. Materialpure wrought copper extrusions, rod and seamless tubing identical material to the conductor. Completely eliminates the possibility of corrosion due to dissimilar metals. Heavy duty connector design. All connectors will carry the equivalent or greater current carrying capacity of the conductor while maintaining high mechanical strength and electrical integrity. Range taking design minimum number of connector combinations required to install a conductor range of #6 solid to 500 kcmil plus 1/2, 5/8, 3/4, and 1 ground rods and rebar. Inventories are kept to a minimum and product selection is simplified. System engineered tooling. Each tooling recommendation has been designed to ensure reliability of the connection. Irreversible compression connectors can be installed in all kinds of weather. Eliminates costly construction delays and enables the installer to better schedule his job. May be installed without special training or special tools. Y750 crimps entire range. Low installed cost. Simplified installation. Each connection can be made in less than 3 minutes. Low installed cost. Simplified installation. Each connector is clearly marked with catalog number, conductor size and installation die information. Easy and accurate identification. Inspection ports are provided to assure proper insertion of the conductor. Built-in quality assurance. The die index number is embossed on the connector after completion of the crimp. Facilitates speedy inspection of installed connectors to insure consistently reliable and sound connections. Most HYGROUND irreversible compression elements are prefilled with PENETROX and individually sealed in clear polyethylene sheet. Ensures that all contact surfaces are in the proper condition for installation. Ensures the electrical integrity of the finished connection by inhibiting moisture and contaminates from entering the contact area. All HYGROUND irreversible compression connectors are Listed in conformance with Underwriters Laboratories Standard UL467 and conform to applicable sections of the National Electrical Code. May be used in direct burial or concrete embedded grounding applications. All HYGROUND irreversible connectors (with the exception of type YGA and YGS) have been tested successfully according to requirements of Standard IEEE 837. Meets tough industry performance requirements. UPRECRIMP dies give added mechanical strength. UPRECRIMP 34 for 3/4 rod, UPRECRIMP 12 for 1/2 rod, and UPRECRIMP 58 for 5/8 rod (now includes undersized U.S. market place rods). Allows connection to most sizes of structural steel with no drilling, tapping, or welding. Safely installed at low cost. Hot work permits are not required to install in hazardous areas. Photo by Mark Wilson Photo by Mark Wilson Substation and Tower Grounding Photo by Tony Alexander Tower Grounding Canada: BURNDY LLC US:

46 BURNDY Renewable ProductsWind Grounding HYGROUND TYPE YGL-C HYGRID CROSS CONNECTOR An irreversable compression ground grid cross connector which allows adjustment of the compression elements prior to installation. Only six connectors and four dies are required to install all combinations from #6 solid through 500 kcmil. UL467 Listed. Acceptable for direct burial in earth and concrete. Prefilled with PENETROX compound and strip sealed IEEE-837 Catalog Number B B-B C C-C D L R YGL2C YGL29C YGL29C YGL34C YGL34C YGL34C ORDERING INFORMATION 1. Where a U or PU die is recommended with Y45 HY- PRESS, a PT6515 adapter must be used. 2. Where a U or PU die is recommended with the Y46 HY- PRESS, a PUADP-1 adapter must be used. ➂ Polarized die for the PAT750-18V. UL96 Listed for Lightning Protection. Catalog Cable to Cable Cable to Ground Rod To Rebar Number Element A Element B Element A Element B Element A #6 Sol. (.162) #2 Str. (.292) YGL2C2 {59500} {59500} #6 Sol. (.162) #2 Str. (.292) #1 Str. (.332) 250 kcmil (.575) {59500} {59500} YGL29C2 #6 Sol. (.162) #2 Str. (.292) 3/8 1/2 {98500} {131500} 1/2 5/8 Rod #2 Str. (.292) 250 kcmil (.575) #2 Str. (.292) 250 kcmil (.575) YGL29C29 #2 Str. (.292) 250 kcmil (.575) #3 4 Rebar {65500} {131500} {65500} {131500} YGL34C2 #6 Sol. (.162) #2 Str. (.292) #6 Sol. (.162) #2 Str. (.292) 5/8 3/4 YGL34C kcmil (.575) 500 kcmil (.813) #2 Str. (.292) 250 kcmil (.575) 5/8 3/4 Rod #2 Str. (.292) 250 kcmil (.575) #5 6 Rebar YGL34C kcmil (.575) 500 kcmil (.813) 250 kcmil (.575) 500 kcmil (.813) Dimensions in brackets { } represent lightning protection conductors. Installation Tools, Die Set Catalog Number (Number of Crimps) Catalog Y750/Y35/Y39 HYPRESS PAT750-18V Y45 HYPRESS Y46 HYPRESS Number Element A Element B Element A Element B Element A Element B Element A Element B YGL2C2 U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) U-0 (1) YGL29C2 U997 (1) U-0 (1) ➂ U997P (1) U-0 (1) U997 (1) U-0 (1) U997 (1) U-0 (1) YGL29C29 U997 (1) U997 (1) ➂ U997P (1) ➂ U997P (1) U997 (1) U997 (1) U997 (1) U997 (1) YGL34C2* PU998 (1) U-0 (1) PU998 (1) U-0 (1) S998 or P998 or U-0 (1) PU998 (1) PU998 (1) U-0 (1) YGL34C29* PU998 (1) U997 (1) PU998 (1) ➂ U997P (1) S998 or PU998 or U997 (1) PU998 (1) PU998 (1) U997 (1) YGL34C34* U1011 (3) U1011 (3) U1011 (3) U1011 (3) S1011 (3) S1011 (3) P1011 (3) P1011 (3) * These connectors can only be installed using the Y750, Y45, or Y46 HYPRESS with the recommended dies. These connectors CANNOT be installed with the Y35 and Y39 HYPRESS. Photo by Mark Wilson NOTES: Before crimping, both connector elements can be turned on rod diameter D to any desired position. Clean rust and/or protective coatings from rebar prior to installation. When attaching connector to ground rod, ground rod must be embossed with appropriate PRECRIMP die. For connections that must meet IEEE 837 requirements UPRE- CRIMP - type PRE crimp dies must be used for maximum clamping retention. Ground Rod Dia. PRECRIMP Dies 1/2 UPRECRIMP 12 5/8 UPRECRIMP 58 U2CABT 3/4 UPRECRIMP 34 US: BURNDY LLC Canada:

47 Grounding HYGROUND BURNDY Renewable ProductsWind TYPE YGLR-C GRIDLOK High Strength Irreversible Compression Ground Rod to Grid Connector Ground grid connector for a wide range of copper cable to ground rod. Provides high torque strength on ground rod. UL467 Listed. Acceptable for direct burial in earth and concrete. Prefilled with PENETROX compound and strip sealed. Element B Element A IEEE-837 Commercial Installation Tools, Die Set Cat. No., (Number Of Crimps) Copper Metric Copper Copper Weld Ground Rod Y35/Y39 HYPRESS Y750/PAT750 Y45 HYPRESS Y46 HYPRESS Catalog Cable Range Cable Range Cable Range Dia. Element Element Element Element Element Element Element Element Number Element A Element A Element A Element B B B-B D L A B A B A B A B #2 Str. (.292 Dia.) 35mm 2 (7.62mm Dia.) kcmil (.343 Dia.) YGLR29C12 thru thru thru U997 (1) PU998 (1) U997 (1) U997 (1) U997 (1) 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) 1/2 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) [12.7] U1011 S998 P998 YGLR34C12 thru thru thru or or or 500 kcmil (.813 Dia.) 240 mm 2 (20.35mm Dia.) kcmil (.810 Dia.) PU998 (1) PU998 (1) PU998 (1) #2 Str. (.292 Dia.) 35 mm 2 (7.62mm Dia.) kcmil (.343 Dia.) [7.9] [64.3] YGLR29C58 thru thru thru U997 (1) PU998 (1) U997 (1) U997 (1) U997 (1) 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) 5/8 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) [15.9] U1011 S998 P998 YGLR34C58 thru thru thru or U1011 (2) or S1012 (2) or P1011(2) 500 kcmil (.813 Dia.) 240 mm 2 (20.35mm Dia.) kcmil (.810 Dia.) PU998 (1) or PU998 (1) or PU998 (1) or #2 Str. (.292 Dia.) 35 mm 2 (7.62mm Dia.) kcmil (.343 Dia.) [19.1] [22.4] PU998 (1) PU998 (1) PU998 (1) YGLR29C34 thru thru thru U997 (1) PU998 (1) U997 (1) U997 (1) U997 (1) 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) 3/4 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) [19.1] U1011 (2) U1011 (2) U1011 (2) YGLR34C34 thru thru thru or or or 500 kcmil (.813 Dia.) 240 mm 2 (20.35mm Dia.) kcmil (.810 Dia.) PU998 PU998 PU998 #2 Str. (.292 Dia.) 35 mm 2 (7.62mm Dia.) kcmil (.343 Dia.) [12.7] [66.8] 1 YGLR29C100 thru thru thru U997 (1) U997 (1) U997 (1) [25.4] 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) 250 kcmil (.575 Dia.) 120 mm 2 (14.40mm Dia.) kcmil (.572 Dia.) U1011 (2) U1011 (2) U1011 (2) 1 YGLR34C100 thru thru thru or or or [25.4] 500 kcmil (.813 Dia.) 240 mm 2 (20.35mm Dia.) kcmil (.810 Dia.) PU998 (1) PU998 PU998 NOTES: 1. Before crimping, both connector elements can be turned on rod diameter 'D' to any desired position. 2. Grooves are filled with PENETROX. 3. Suitable for direct burial in earth or concrete. 4. The catalog numbers shown are for unplated copper connectors for use on copper clad or stainless steel ground rod. To order electro-tin plated connectors for use on galvanized steel ground rod add suffix TN to the catalog number, only if the Figure 8 connector (Element B ) is tin plated, the Figure 6 connector (Element A ) is unplated. Note: The ground rod hole diameter is larger for galvanized steel ground rod in the tin plated connector. 5. Ground rod must be pre-crimped with die U2CABT (Index No. 348) when crimping the ground rod element (Element B ) with the PU998 dies in the Y750, Y35, Y39, Y45, or Y46 tools. Pre-crimping is not required when the S1012, P1011 or U1011 dies are used. See precrimp die chart. 6. Where a 'U' or 'PU' die is recommended with the Y45 HY- PRESS, a PT6515 adapter must be used. 7. Where a 'U' or 'PU' die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. 8. Dimensions in bracket [ ] are in millimeters. 9. Die 1011 appears on Element B of the connector only. Ground Rod Dia. PRECRIMP Dies 1/2 UPRECRIMP 12 5/8 UPRECRIMP 58 U2CABT 3/4 UPRECRIMP 34 When attaching connector to ground rod, ground rod must be embossed with appropriate PRECRIMP die. For connections that must meet IEEE 837 requirements UPRECRIMP - type PRE crimp dies must be used for maximum clamping retention. Canada: BURNDY LLC US:

48 BURNDY Renewable ProductsWind TYPE YGHC-C HYTAP Connector Irreversible compression ground tap figure C connectors. Accomodates all cable combinations from #6 solid through 500 kcmil. C - shaped opening permits placing two continuous parallel cables into conductor groove. UL 467 Listed. Acceptable for direct burial in earth or concrete. Prefilled with PEN- E TROX compound and strip sealed. Certain sizes are also UL 467 Listed and CSA Certified for wire to ground rod. UL96 Listed for Lightning Protection. New! Ground Rod to Wire UL 467 Listed and CSA Certified for Direct Burial IEEE-837 Photo by Debbie Werthman Grounding HYGROUND Commercial Copper Cable Range/ Installation Data Ground Rod Stranded Copper Die Y750/Y35/ ➀ ➁ No. Catalog to Copper Cable Cable Range Index PAT750/Y39 Y45 Y46 of Number Run Tap Run Tap A B No. HYPRESS HYPRESS HYPRESS Crimps YGHC2C2 #6 Sol. (0.162) #6 Sol. (0.162) 10 mm #2 Str. (0.292) (4.12 mm) 10 mm 2 (4.12 mm) #2 Str. (0.292) 35 mm 1/4 Rod ➆ (7.62 mm) 35 mm 2 (7.62 mm) [30] [19] C U-C U-C U-C 1 YGHC26C2 1 Str. (0.328) #6 Sol. (0.162) {98500} {#6 Sol.} 35 mm 2/0 Str. (0.419) (7.62 mm) 10 mm 2 (4.12 mm) #2 Str. (0.292) 70 mm {98500} (10.9 mm) 35 mm 2 (7.62 mm) [36] [19] {#2 Str.} 3/8 Rod ➆ 0 U-O U-O U-O 1 YGHC26C26 1 Str. (0.328) 1 Str. (0.328) {98500} {98500} 35 mm 2/0 Str. (0.419) (7.62 mm) 35 mm 2 (7.62 mm) /0 Str. (0.419) 70 mm {98500} (10.9 mm) 70 mm 2 (10.9 mm) [39] [19] {98500} 3/8 Rod ➆ 0 U-O U-O U-O 1 YGHC29C26 3/0 Str. (0.470) 6 Sol. (0.162) {3/0 Str.} {59500} 95 mm 250 kcmil (0.575) (12.5 mm) 10 mm 2 (4.12 mm) /0 Str. (0.419) 120 mm {250 kcmil} (14.4 mm) 70 mm 2 (10.9 mm) [50] [19] {98500} 1/2 or 5/8 Rod ➆ 997 U997 U997 U997 1 YGHC29C29 3/0 Str. (0.470) 3/0 Str. (0.470) 95 mm 250 kcmil (0.575) (12.5 mm) 95 mm 2 (12.5 mm) /2 or 5/8 Rod ➆ 250 kcmil (0.575) 120 mm2 (14.4 mm) 120 mm 2 (14.4 mm) [52] [22] 997 U997 U997 U997 1 YGHC34C26 ➅ 300 kcmil (0.630) #6 Sol. (0.162) {300 kcmil} {59500} 150 mm 500 kcmil (0.813) (16 mm) 10 mm 2 (4.12 mm) /0 Str. (0.419) 240 mm {500 kcmil} (20.35 mm) 70 mm 2 (10.9 mm) [62] [22] {98500} 3/4 Rod ➆ 1011 U1011 S1011 P YGHC34C29 ➅ 300 kcmil (0.630) 3/0 Str. (0.470) 150 mm 2 (16 mm) 95 mm 2 (12.5 mm) kcmil (0.813) 250 kcmil (0.575) 240 mm 2 (20.35 mm) 120 mm 2 (14.4 mm) [66] [22] 1011 U1011 S1011 P YGHC34C34 ➅ 300 kcmil (0.630) 300 kcmil (0.630) 150 mm 2 (16 mm) 150 mm 2 (16 mm) kcmil (0.813) 500 kcmil (0.813) 240 mm 2 (20.35 mm) 240 mm 2 (20.35 mm) [74] [28] 1011 U1011 S1011 P Dimensions in brackets { } represent lightning protection conductors. NOTES: ➀ Where a U or PU die is recommended with the Y45 HYPRESS, PT6515 adapter must be used. ➁ Where a U or PU die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. 3. Listed under UL486A for copper wire connectors 4. Dimensions in brackets [ ] are in millimeters. 5. In referencing connectors without PENETROX oxide inhibitor add suffix NP to the end of the Catalog Number. ➅ These connectors can only be installed using the Y750, Y45 or Y46 HYPRESS with the recom mended dies. These connectors cannot be installed with the Y35 and Y39 HYPRESS. ➆ Ground rod to copper cable is UL 467 Listed for direct burial in earth and concrete. Ground Rod Dia. PRECRIMP Dies 1/2 UPRECRIMP 12 5/8 UPRECRIMP 58 U2CABT 3/4 UPRECRIMP 34 For ground rod to wire applications, ground rod must be precrimped, see above table for appropriate precrimp dies. US: BURNDY LLC Canada:

49 Grounding HYGROUND BURNDY Renewable ProductsWind TYPE YGHP-C HYTAP Connector Irreversible compression ground tap figure 6 can be used as a tap connector or as a tap splice connector. Four die sets and eight connectors can accommodate a conductor range from #8 solid through 500 kcmil plus 1/2, 5/8, and 3/4 copper bonded ground rods. UL467 Listed. Acceptable for direct burial in earth and concrete. Prefilled with PENE TROX compound and strip sealed. UL96 Listed for Lightning Protection. IEEE Fig. 1 Fig. 2 Installation Data ➄ Die Y750/Y35 ➂ ➃ Catalog Fig. Accommodates Cable to Rebar Index Y39 Y45 Y46 No. of Number No. Run Tap Run Tap B No. HYPRESS PAT750-18V HYPRESS HYPRESS Crimps #4 Sol. (0.204) {#4 Sol.} YGHP29C2 1 #3 Rebar #2 Str. #2 Str. (0.292) {#2 Str.} 1/0 Str. (0.372) {98500} 3/8 1/0 Str. (0.372) {98500} YGHP29C kcmil (0.575) {131500} through 1/0 Str. 2/0 Str. 2/0 Str. (0.419) {98500} 1/2 5/8 Rod 1/2 3/0 Str. (0.470) {131500} YGHP29C29 ➁ 1 #4 Rebar 3/0 Str. 250 kcmil 250 kcmil (0.575) {211500} U997 ➆ U997P U997 U /0 Str. (0.372) {98500} [19] YGHP34C26 ➅ kcmil (0.575) {250 kcmil} 1/0 Str. 2/0 Str. 2/0 Str. (0.419) {98500} #5 Rebar PU998 or PU998 or 500 kcmil (0.813) {500 kcmil} 998 PU998 PU998 3/0 Str. (0.470) {131500} 5/8 S998 P998 YGHP34C29 ➅ 1 5/8 3/4 Rod 3/0 Str. 250 kcmil 250 kcmil (0.575) {211500} through 1 YGHP34C34 ➅ kcmil (0.575) 3/4 350 kcmil (0.681) kcmil (0.813) #6 Rebar 350 kcmil 500 kcmil 500 kcmil (0.843) [28] 5/8 3/4 Rod 1011 ➅U1011 U1011 S1011 P Dimensions in brackets { } represent lightning protection conductors. NOTES: ➀ When using #6 Sol. in tap, fold conductor double to improve fill in YGHP2C2. ➁ For YGHP29C29 when using 3/0 in tap, minimum run conductor is 2/0 STR. ➂ Where a 'U' or 'PU' die is recommended with the Y45 HYPRESS, a PT6515 adapter must be used. ➃ Where a 'U' or 'PU' die is recommended with the Y45 HYPRESS, a P-UADP-1 adapter must be used. ➄ Clean rust and protective coatings from rebar before connector installation to provide a proper ground connection. Precrimping is not required. ➅ These connectors can only be installed using the Y750, Y45 or Y46 HYPRESS with the recommended dies. These connectors can not be installed with the Y35 and Y39 HYPRESS. ➆ Polarized die for the PAT750-18V. ➇ Not UL96/CSA. Ground Rod Dia. PRECRIMP Dies 1/2 UPRECRIMP 12 5/8 UPRECRIMP 58 U2CABT 3/4 UPRECRIMP 34 For increased rotational resistance on ground rods, pre-crimp ground rod with U2CABT die Index 348 or uprecrimp dies may be used for even greater rotation and vibration resistance on ground rods. CABLE TO GROUND ROD CABLE TO REBAR CABLE TO CABLE FOR CONCRETE ENCASED ELECTRODE GROUNDING APPLICATIONS Canada: BURNDY LLC US:

50 BURNDY Renewable ProductsWind Grounding HYGROUND TYPE YSHG High Strength Copper Irreversible Compression Double H-Tap Connector Type YSHG Double H-Tap grounding series is comprised of five connectors designed to accommodate wire range sizes #14 through 500 kcmil, including ground rod sizes: 3/4, 1, and rebar sizes: #6, #8 and #9. Prefilled with PEN- ETROX E2 and strip sealed. Features and Benefits UL467 Listed. Suitable for direct burial in earth or concrete. Material is high conductivity copper extrusion. Minimizes resistance, eliminates corrosion due to dissimilar metals. Grooves are prefilled with PENETROX E2 oxide inhibitor and individually sealed. Inhibits moisture and contaminants ensuring electrical integrity. Fig. 1 Fig. 2 Fig. 3 Tooling Index Catalog Fig. Conductor Sizes (number of crimps) Emboss- W T L Number No. Main Tap 1 Tap 2 Tap 3 PAT750/Y750 Y46 ment YSHG4429 #9 & #8 Rebar, 1 [25] Ground PYFR (2) K-R 3 Rod [82] [43] [62] * YSHG #6 Rebar, 1 [25] Cu Clad Ground Rod, 3/4 Ground Rod 4/0-1/ PYFR (2) K-R [75] [38] [59] kcmil Copper YSHG #6 Rebar, 3/4 [19] Ground Rod P1104 (2) /0 U1104 (4) kcmil COPPER U1104 (4) [62] [29] [62] YSHG #6 Rebar, 3/4 [19] Ground Rod P1104 (2) /0-1/ U1104 (4) /0 kcmil Copper U1104 (4) [57] [33] [62] * Note: Not for use on 1 steel ground rod. Use PUADP-1 adapter. US: BURNDY LLC Canada:

51 Grounding HYGROUND BURNDY Renewable ProductsWind TYPE YGHR-C HYTAIL High Strength Irreversible Compression Ground Rod Tap Connectors High torque strength ground rod connectors. Accommodates a wide range of copper conductors to ground rod. UL467 Listed. Acceptable for direct burial in earth or concrete. Prefilled with PENETROX compound and strip sealed. IEEE-837 Catalog Number H B YGHR26C [49.3] YGHR26C [50.0] YGHR26C [55.6] YGHR26C [56.2] YGHR29C [49.3].88 YGHR29C [54.4] [22.4] YGHR29C [55.6] YGHR29C [62.2] YGHR34C [54.4] YGHR34C [62.0] YGHR34C [68.6] Catalog Commercial Copper Nominal Ground Installation Tools, Die Set Catalog Number (Number of Crimps) Number Cable Range Rod Dia. PAT750/Y750/Y35/Y39 1 Y45 HYPRESS 1 Y46 HYPRESS 1 YGHR26C12 1/2 [12.7] S1012 (2) YGHR26C58 #2 Str. (.292 DIA.) 5/8 [15.9] ➃ YGHR26C34 thru 3/4 [19.0] PU998 (1) 2 YGHR26C100* 2/0 Str. (.419 DIA.) S1011 (2) S1012 (2) 1 [25.4] PU998 (1) YGHR29C12 1/2 [12.7] U1011 (2) S1012 (2) P1011 (2) YGHR29C58 #4/0 Str. (.528 DIA.) 5/8 [15.9] ➃ ➃ ➃ YGHR29C34 thru 3/4 [19.0] PU998 (1) PU998 (1) 2 PU998 (1) YGHR29C100* 250 kcmil (.575 DIA.) S1011 (2) S1012 (2) 3 1 [25.4] ➃ PU998 (1) YGHR34C kcmil (.630 DIA.) 5/8 [15.9] S1012 (2) ➃ YGHR34C34* thru 3/4 [19.0] PU998 (1) 2 YGHR34C100* 500 kcmil (.813 DIA.) 1 [25.4] S1011 (2) P1011 (2) NOTES: The catalog numbers shown are for unplated copper connectors for use on copper clad or stainless steel ground rod. To order electro-tin plated connectors for use on galvanized steel ground rod add suffix TN to the catalog number. Note: The ground rod hole diameter is larger for galvanized steel ground rod in the tin plated connector. 1 Ground rod must be pre-crimped with die U2CABT (Index No. 348) when the PU998 dies are used in the Y750, Y35, Y39, Y45, or Y46 tools. Pre-crimping is not required when the P1011, S1011, S1012 or U1011 dies are used. UPRECRIMP dies may be used for additional mechanical resistance on ground rods. ➁ Where a PU998 die is recommended with the Y45 HYPRESS, a PT6515 adapter must be used. ➂ Where a PU998 die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. ➃ These die numbers do not appear on the connector. * These connectors can only be installed using the Y750, Y45 or the Y46 HYPRESS with the recommended dies. These connectors CAN NOT be installed with the Y35 and Y39 HYPRESS. When attaching connector to ground rod, ground rod must be embossed with appropriate PRECRIMP die. For connections that must meet IEEE 837 requirements UPRECRIMP - type PRE crimp dies must be used for maximum clamping retention. Canada: BURNDY LLC US:

52 BURNDY Renewable ProductsWind Grounding HYGROUND TYPE YGHA HYLUG Heavy Duty Irreversible Compression Terminals Heavy duty HYLUG irreversible compression terminals designed not only to carry short circuit load, but to also withstand high mechanical stress. Each conductor element has an inspection probe hole to insure proper cable insertion. UL467 Listed. Acceptable for direct burial in earth or concrete. UL486A Listed. Prefilled with PENETROX compound and strip sealed. IEEE-837 Installation Tools, Die Set Catalog Number, Catalog and (Number of Crimps) Number Copper Conductor Size HYPRESS Y35/Y39/Y45 1 /Y46 2 /Y750 /PAT750 B C L T YGHA2C-2N 2 str. U1CRT (1) YGHA25-2N 1/0 str. U27RT (1) YGHA26-2N 2/0 str. U28RT (1) YGHA27-2N 3/0 str. U29RT (1) YGHA28-2N 4/0 str. U30RT (2) YGHA29-2N 250 kcmil U31RT (2) YGHA31-2N 350 kcmil U34RT (2) YGHA34-2N 500 kcmil U36RT (3) Where a U or PU die is recommended with the Y45 HYPRESS, a PT6515 adapter must be used. ➁ Where a U or PU die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. TYPE YGHS HYLINK Heavy Duty Irreversible Compression Terminals Heavy duty HYLINK ground splice designed not only to carry short circuit load, but to also withstand high mechanical stress. Each conductor element has an inspection probe hole and a center stop to ensure proper cable insertion. UL467 Listed. Acceptable for direct burial in earth or concrete. UL486A Listed. Prefilled with PENETROX compound and strip sealed. 1 Where a U or PU die is recommended with the Y45 HYPRESS, a PT6515 adapter must be used. IEEE-837 KNURLED RINGS INSPECTION PROBE HOLES FOR CABLE STOP Installation Tools, Die Set Catalog Number, Catalog and (Number of Crimps) Number Copper Conductor Size HYPRESS Y35/Y39/Y45 1 /Y46 2 /Y750 /PAT750 B L YGHS2C 2 str. U1CRT (1) YGHS25 1/0 str. U27RT (1) YGHS26 2/0 str. U28RT (1) YGHS27 3/0 str. U29RT (1) YGHS28 4/0 str. U30RT (2) YGHS kcmil U31RT (2) YGHS kcmil U34RT (2) YGHS kcmil U36RT (3) ➁ Where a U or PU die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. US: BURNDY LLC Canada:

53 Grounding HYGROUND BURNDY Renewable ProductsWind TYPE YGF Grounding Plate The irreversible compression ground plate is designed to withstand the rigors of concrete construction. The ground plates are made of high strength, high-conductivity cast copper alloy body with a pure wrought copper compression element. In addition to the tapped NEMA size holes and spacing on the face, the plate comes with a tapped hole on the underside for ease of positioning prior to pouring the concrete. UL467 Listed. Acceptable for direct burial in earth or concrete. Prefilled with PENETROX compound and strip sealed. IEEE-837 Fig. 1 Fig. 2 Catalog Number Fig. No. C D H L T Y YGF29-2N YGF29-4N YGF34-2N YGF34-4N NOTES: 1 This tapped hole may be used to position the grounding plate on a threaded rod prior to placement of the concrete. 1 3/8-16 thread with 1.00 EFF. Thread is standard. If other thread is required, add appropriate Code No. to Catalog No. for desired thread. -50 (1/2-13,.94 EFF. Thread), -62 (5/8-11,.94 EFF. Thread) and -75 (3/4-10,.81 EFF. Thread) Example: YGF34-4N-50 is YGF34-4N with 1/2-13 Thread 2 Plastic plugs are provided to keep dirt out of the threaded holes until the attachment of grounding terminals. Installation Tools, Die Set Cat. No., and (number of crimps) Catalog Copper Tapped Holes HYPRESS Number Conductor Range Size Hole Centers PAT750/Y750/Y35/Y39 Y45 1 Y46 2 YGF29-2N kcmil 1/ /4 U997 (1) U997 (1) U997 (1) YGF29-4N kcmil 1/ /4 U997 (1) U997 (1) U997 (1) YGF34-2N* kcmil 1/ /4 U1011 (3) S1011 (2) P1011 (2) YGF34-4N* kcmil 1/ /4 U1011 (3) S1011 (2) P1011 (2) ORDERING INFORMATION 1 Where a U or PU die is recommended with the Y45 HYPRESS, a PT6515 adapter must be used. ➁ Where a U or PU die is recommended with the Y46 HYPRESS, a PUADP-1 adapter must be used. * These connectors can only be installed using the Y750, Y45 or Y46 HYPRESS with recommended dies. These connectors CAN NOT be installed with the Y35 or Y39 HYPRESS. Canada: BURNDY LLC US:

54 BURNDY Renewable ProductsWind Grounding HYGROUND TYPE GSTUD-HY VERSITAIL Structural Steel Grounding Connector INSTALLATION 1. Weld the VERSITAIL to the steel member. 2. Select the proper connector for your specific application. a. FOR COMPRESSION CONNECTORS Select the proper BURNDY YGHP, connector. Clean the conductor, join the VERSITAIL and the grounding conductor together with the recommended tool and die set, then crimp the connector over the knurled area of the VERSITAIL. b. FOR MECHANICAL CONNECTORS Select the properly sized BURNDY connector. Clean the conductor, then apply PENETROX E oxide inhibiting compound on the contact area for increased effectiveness and service life. Put the connector over the knurled area of the VERSITAIL and apply the recom mended torque value for correct instal lation. FEATURES The VERSITAIL may be welded to steel surfaces quickly and easily with normal construction equipment. The VERSITAIL eliminates costly disk grinding and the need to expose virgin metal. The welding process burns through the oxidation and scale to establish excellent electrical grounding continuity. The VERSITAIL may be installed by the welder in the field or at the steel fabricator based on customer preference. The VERSITAIL pure copper coating over low carbon, hot rolled steel is compatible with standard welding processes. No toxic gasses are generated. The VERSITAIL knurled surface is copper plated and specifically designed to ensure excellent mechanical gripping and electrical integrity for BURNDY compression and mechanical connectors in all grounding applications. The VERSITAIL may be installed during adverse weather conditions thus eliminating costly construction delays. BENEFITS Low installation cost. No drilling... No cleaning... No special preparation SPECIFICATIONS Low Carbon, hot rolled steel. Pure copper plated finish. L TYPICAL LETTERING A (STOCK DIA.) KNURLED END 45 (FLATTENING RESULTANT) 1.25 [32] 2.19 [56] B (DIA. OVER KNURL) T Electrical Equivalent Nom. Dimensions Copper Catalog Rod A B L T Conductor Size Number Size In. [mm] In. [mm] In. [mm] In. [mm] (AWG)* GSTUD14HY 1/4.25 [6.3].26 [6.6] 4.81 [122.2].19 [4.8] #6 GSTUD38HY 3/8.38 [9.7].39 [9.9] 5.81 [147.6].25 [6.4] #3 GSTUD916HY 5/8.56 [14.2].57 [14.5] 5.68 [144.3].38 [9.7] 1/0 GSTUD34HY 3/4.75 [19.0].76 [19.3] 5.81 [147.6].51 [13.0] 4/0 * This is the equivalent rating for continuous service. Larger conductors may be connected using both compression and bolted connectors in potential ground fault applications. US: BURNDY LLC Canada:

55 Grounding Mechanical Grounding BURNDY Renewable ProductsWind MECHANICAL GROUNDING CONNECTORS More than 60 years of technological innovation has made BURNDY mechanical grounding connectors one of the most widely used, highly respected lines in the industry. There is virtually no grounding application problem that this diversified line cannot help solve. All BURNDY mechanical grounding connectors have been designed for easy installation and for outstanding durability. Only the finest high copper alloys are used in their manufacture, ensuring top performance under the most extreme environmental conditions. UL467 Listed for direct burial applications in earth or concrete. Photo by Craig Lawson Transformer Grounding TYPES KC, K2C SERVIT POST For Copper Cable to Flat SERVIT POST used to ground one or two cables to steel structures, fence posts, transformers. Also used to tap one or two cables from bus bar. One-wrench installation. KC K2C TYPES KC22J12T13, EQC632C Transformer Ground Connectors For Copper Fits all standard EEI NEMA distribution transformers as a tank grounding terminal. Stud Size = Catalog Number KC22J12T13 KC26 KC34J12T13 EQC632C Type EQC632C Ranges 8 Sol. - 2 Sol. 2 Sol. - 2/0 Str. 3/0-500 Str. 8 Sol. - 2 Str. Type KC22J12T13 Both, one-wrench installation. Canada: BURNDY LLC US:

56 BURNDY Renewable ProductsWind TYPE GAR Wire to Rebar Fence Post Grounding Connector Wire to Pipe For Parallel or 90 Copper Cable Connection to Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel or at right angles to rod or tube. Especially good for fence posts. High copper alloy cast body with DURIUM U-bolts, nuts and lockwashers, permit entire connection to be buried in ground or concrete without danger of corrosion. One-wrench installation. UL467 Listed. Acceptable for direct burial. New! Rebar to Wire UL Listed and CSA Certified for Direct Burial Wire to Rebar Wire at Right Angle to Pipe Photo by Mark Wilson Grounding Mechanical Grounding Wire Parallel to Pipe Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Rebar Size Cable H J W GAR114C 8 Sol. - 4 Str. GAR1126 1/4 1/2 4 Sol. - 2/0 Str. 2-1/2 1-7/8 GAR1129 2/0 Sol GAR644C 8 Sol. - 4 Str. 3/8 GAR6426 #5 (5/8 ) - 4 Sol. - 2/0 Str. 2-7/8 2-1/8 3/8 5/8-3/4 GAR6429 #6 (3/4 ) 2/0 Sol GAR /2 1/2 2-1/2 GAR144C 8 Sol. - 4 Str. 2-3/4 GAR1426 #7 (7/8 ) - 4 Sol. - 2/0 Str. 3/8 2-3/8 1/2-3/4 7/8-1 3 GAR1429 #8 (1 ) 2/0 Sol GAR /4 1/2 2-3/4 GAR154C 8 Sol. - 4 Str. 2-7/8 GAR1526 #9 (1-1/8 ) - 4 Sol. - 2/0 Str /8-1-1/4 GAR1529 #10 (1-1/4 ) 2/0 Sol /8 3/8 2-5/8 GAR /2 1/2 GAR164C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 3-1/2 3/ /4 1-3/8-1-1/2 #11 (1-3/8 ) GAR1629 2/0 Sol GAR /4 1/2 3-3/8 GAR174C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 4 3/8 3-1/4 1-1/2 1-5/8-1-7/8 GAR1729 2/0 Sol GAR /8 1/2 2-5/8 GAR184C 8 Sol. - 4 Str. 4-1/4 GAR Sol. - 2/0 Str /8 GAR1829 2/0 Sol /2 3/8 3-3/4 GAR /4 1/2 4-1/8 GAR194C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 5 3/8 4-1/4 2-1/2 2-1/2-2-7/8 GAR1929 2/0 Sol GAR /8 1/2 4-5/8 US: BURNDY LLC Canada:

57 Grounding Mechanical Grounding BURNDY Renewable ProductsWind TYPE GAR (Continued) Fence Post Grounding Connector Catalog Conductor Number Tube I.P.S. Rod Size or O.D. Range Cable H J W GAR204C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 5-5/8 3/8 4-3/ /2 GAR2029 2/0 Sol GAR /8 1/2 5-1/4 GAR214C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 6-1/4 3/8 5-3/8 3-1/2 3-1/2-4 GAR2129 2/0 Sol GAR /4 1/2 5-3/4 GAR224C 8 Sol. - 4 Str. GAR Sol. - 2/0 Str. 6-3/8 3/8 5-7/ /2 GAR2229 2/0 Sol GAR /8 1/2 6-1/4 GAR244C 8 Sol. - 4 Str. 3/8 6-7/8 GAR Sol. - 2/0 Str. 7-3/4 5 GAR2429 2/0 Sol /2 7-1/4 GAR /8 GAR /0 Sol /16 1/2 8-3/8 Contact BURNDY for additional pipe and wire size combinations not shown. Photo by Debbie Werthman Tower Grounding Canada: BURNDY LLC US:

58 BURNDY Renewable ProductsWind Grounding Braid FLEXIBLE COPPER BRAID JUMPER Copper braid is made of tinned, pure copper wire woven and flattened into a rectangular shape for greater flexibility. Seamless, pure copper ferrules are formed and assembled on each end to provide appropriate contact surfaces. Braid is used extensively to compensate for expansion and contraction of moving parts and for thermal movement of rigid devices; to prevent breakage of insulators or bushings or equipment because of misalignment during settling of substation foundations; to absorb shock and vibration of operating equipment; and to provide flexible current carrying leads between moving parts of heavy machinery or equipment. CURRENT CARRYING CAPACITY Flexible copper braid has generally better heat dissipation properties than flat bar, cable or other conductors, and therefore can be expected to have a greater current carrying capacity for a given cross-sectional area. This is due to its greater surface area resulting from the woven construction of fine strands. However, ventilation, due to the vertical convection current of air, is appreciably better when the long axis of the braid is vertical rather than horizontal, so that the long sides of the braid, rather than the edges, are exposed to the moving air. This is particularly true when spaced braids are used in multiple as can be seen by comparing Figures 1 and 2. To take full advantage of ventilation, the cooling convection current of air should be permitted to flow freely between the braids. Therefore, if possible, the braids should be spaced apart, rather than bunched together, as illustrated in Figure 3. The effectiveness of spacing is, or course, greater when the braids are in a vertical position. BULK BRAID Bulk braid can be ordered with a minimum order quantity of 10 feet. Specify feet in number of inches. Example: 10 feet of 190 ampere braid is Catalog No. BB077L120. INDOOR EQUIV APPROX RATING CIRCULAR CAT WEIGHT AMPS AREA NO. PER* FT ,184 BB077L ,700 BB154L ,552 BB226L ,000 BB300L 1.06 Fig. 1 Fig. 2 Fig. 3 Cooling Due to Convection Currents Much More Effective with Spaced Braid US: BURNDY LLC Canada:

59 Grounding Braid BURNDY Renewable ProductsWind FLEXIBLE COPPER BRAID CUSTOM DESIGNS Flexible copper braid offers an economical and efficient means of protecting electrical equipment from the potentially harmful effects of shock and vibration, terminal expansion, movement of components and misalignment that may occur during the service life of the equipment. Many varieties of braid are required to meet those needs which we can build to your specifications. We also offer engineering assistance in the selection of the most appropriate standard or custom braid configuration for your application. CUSTOM VARIATIONS Drilling * Undrilled * Elongated (slotted) holes * Special hole patterns and location * Metric *NEMA Plating * Tin * Silver * Nickel * Unplated Length * Jumper (overall) * Ferrule(s) contact Insulated (covered) * Tubular * Heat shrink Split Braid Assemblies * Stacked * Side-by-side Multiple Ferrules Preformed Configurations * Offset contact surfaces * Angular (e.g., 90, 180 ) bends * Ferrule contact surfaces rotated 90 on braid axis Combined Braid Assemblies Combined Connector - Braid Assemblies Ferrule Variations * Belled/unbelled * Width/thickness * Contact length * Special shaping * Bent at angle High Ampacity Requirements Canada: BURNDY LLC US:

60 BURNDY Renewable ProductsWind Grounding Braid TYPE B Flexible Copper Braid Flexible copper braid jumpers designed to take up linear expansion and contraction, compensate for misalignment and absorb vibratory movement of electrical equipment and devices. Made of flat extra flexible, tinned, pure copper braid, with unplated, seamless, pure copper ferrules formed into a rectangular shape on each end. Last two numbers in catalog number indicate total length of braid in inches (e.g., BD12N or BD12 is 12 long braid jumper). Other lengths, plating and drilling are available. Refer to factory. Number of Approximate Catalog Braids in Ampere Rating Number Ferrules C D E K L N T Indoor Outdoor BD BD12N** BD BD18N** BD BD24N** BE BE12N** BE BE18N** BE BE24N** BF BF12N** BF BF18N** BF BF24N** BG BG12N** BG BG18N** BG BG24N** * This rating may vary with ambient conditions, orientation of the braid and other service conditions. ** Tongue drilled per (2) hole NEMA standard. Note: All sizes are listed to UL467 and specific sizes ( ) are certified to CSA C22.2, No. 41 Grounding and Bonding Equipment Standards. Equivalent sizes may be designated by suffix letters representing variations in length, mounting configurations, pad size and finish. Contact factory for details. US: BURNDY LLC Canada:

61 Grounding Braid BURNDY Renewable ProductsWind TYPE B Flexible Copper Braid (Continued) Number of Approximate Catalog Braids in Ampere Rating Number Ferrules C D E K L N T Indoor Outdoor B2D B2D12N** B2E B2E12N** B2F B2F12N** B2G12N** B3D B3D12N** B3E B3E12N** B3F B3F12N** B3G B3G12N** B4D B4D12N** B4E B4E12N** B4F B4F12N** B4G12N** * This rating may vary with ambient conditions, orientation of the braid and other service conditions. ** Tongue drilled per (2) hole NEMA standard. Note: All sizes are listed to UL467 and specific sizes ( ) are certified to CSA C22.2, No. 41 Grounding and Bonding Equipment Standards. Equivalent sizes may be designated by suffix letters representing variations in length, mounting configurations, pad size and finish. Contact factory for details. Photo by Mark Wilson Fence Grounding Canada: BURNDY LLC US:

62 BURNDY Renewable ProductsWind Grounding BURNDYWeld Exothermic BURNDYWeld The BURNDYWeld connection process is a simple, efficient method of welding copper to copper or copper to steel. One advantage is that NO outside power is required when using the BURNDYWeld exothermic process. The BURNDYWeld process uses high temperature reaction of powdered copper oxide and aluminum. The reaction takes place in a semipermanent graphite mold. These molds will last for fifty or more welds if proper care is given. The reaction takes place very rapidly, therefore the total amount of heat applied to the conductors or surfaces is considerably less than that of brazing or soldering. It is important to remember this when welding to insulated cable or thin wall pipe. This system is very field friendly, since it is light and portable and requires no outside power source. It requires very little time or skill to obtain an efficient, maintenance free connection when using the BURNDYWeld process. For more information visit our website at The BURNDYWeld process has been used to weld materials other than copper for electrical purposes. Materials welded include: Stainless Steel Columbium Brass Copperweld Plain Steel Bronze Nichrome V Everdur Niobium Galvanized Steel Kama Chromax Silcone Bronze Steel Rail Cast Iron Copper Clad Steel Cor-Ten Monel When welding to galvanized steel it is recommended to resurface exposed bare steel. The BURNDYWeld connection is a molecular weld. The weld metal has the same melting point as copper. These factors along with the increased cross section of the connection, BURNDYWeld connections: 1. Will not be affected by a high current surge. Tests have shown that the electrical conductor will melt before the BURNDYWeld connection when subjected to high short circuit current. Consult IEEE Standard Will not loosen or corrode at the point of weld. There are no contact surfaces or mechanical pressures involved. A BURNDYWeld connection becomes an integral part of the conductor. 3. Have a current-carrying capacity equal to or greater than that of the conductors. Lid Graphite Mold Starting Powder Weld Metal Tap Hole Weld Cavity Cable Ground Rod For mold types or BURNDYWeld items not shown, please contact factory. US: BURNDY LLC Canada:

63 Grounding BURNDYWeld Exothermic BURNDY Renewable ProductsWind WELD METAL BURNDYWeld Weld Metal is packed in moisture-resistant plastic cartridges that have tight fitting caps. These cartridges, along with the necessary steel discs, are then packed in boxes that are hermetically-sealed. This ensures the powder arriving in good condition, always dry and ready for fast positive ignition. BURNDYWeld Weld Metal comes in several types; one for welding copper to copper, copper to steel, copper to rail, copper to cast iron and one for welding copper to steel for cathodic protection. The size and weight (in grams) of the cartridge are marked on each individual cartridge. Cathodic Standard Cast Iron Protection Rail Cartridge Cartridge Cartridge Cartridge Cartridges Size Size Size Size Per Box 15 15CI 15CP 15R CI 25CP 25R CI 32CP 32R CI 45CP 45R CI 65CP 65R CI 90R Cl 115R R R R R 10 BURNDYWeld Weld Metal is sold in box quantities only. Steel Discs Sold Separately Weld Catalog Number Package Metal Size Steel Discs Only Quantity 15 to 65 B to 115 B to 500 B Photo by Debbie Werthman Photo by Debbie Werthman Tower Grounding For mold types or BURNDYWeld items not shown, please contact factory. Canada: BURNDY LLC US:

64 BURNDY Renewable ProductsWind Grounding BURNDYWeld Exothermic TYPE BCC-11 MOLDS Horizontal to Horizontal Cable Cross Type BCC-11 Molds are used to join uncut horizontal cables at right angles to each other. Size range is #6 through 500 kcmil solid or concentric stranded copper conductors. Contact BURNDY for information on molds for conductors not listed below. Cable Price Weld Handle Run Tap Mold Number Key Metal Clamps #6 #6 B * 45 N/A #4 #4 B B-106 #2 #2 B B-106 #4 B B-106 #1 B B-106 #1 #2 B B-106 #4 B B-106 1/0 B B-106 1/0 #1 B B-106 #2 B B-106 #4 B B-106 2/0 B B-106 2/0 1/0 B B-106 #1 B B-106 #2 B B-106 3/0 B B-106 2/0 B B-106 3/0 1/0 B B-106 #1 B B-106 #2 B B-106 For sizes not listed, contact BURNDY. Molds listed are for concentric stranded cable. Add suffix -S to mold number for solid conductors. For heavy duty molds, molds with wear plates or molds for Copperweld cable, contact BURNDY. For expedited service, contact BURNDY. Required Tools: Handle Clamps (see chart for correct handles) Sold complete with handles * B Flint Ignitor Cable Price Weld Handle Run Tap Mold Number Key Metal Clamps 4/0 B B-106 3/0 B B-106 4/0 2/0 B B-106 1/0 B B-106 #1 B B-106 #2 B B kcmil B B-106 4/0 B B-106 3/0 B B kcmil 2/0 B B-106 1/0 B B-106 #1 B B-106 #2 B B kcmil B B kcmil B B-107 4/0 B B kcmil 3/0 B B-107 2/0 B B-107 1/0 B B-106 #1 B B-106 #2 B B-106 Other recommended accessories: B Mold Cleaner for cartridge sizes #15-#65 B Mold Cleaner for cartridge sizes #90-#500 B Mold Cleaning Brush B Cable Cleaning Brush B Cable Clamp Photo by Debbie Werthman Tower Grounding Photo by Debbie Werthman For mold types or BURNDYWeld items not shown, please contact factory. US: BURNDY LLC Canada:

65 Grounding BURNDYWeld Exothermic BURNDY Renewable ProductsWind TYPE BCR-1 MOLDS Horizontal Cable Terminal to Ground Rod Type BCR-1 Molds are used to terminate horizontal copper cable at the top of a vertical ground rod. Size range is #6 through 1000 kcmil solid or concentric stranded copper conductors; 1/2 through 1 for the ground rod. Contact BURNDY for information on molds for conductors not listed below. Cable Price Weld Handle Grd Rod Tap Mold Number Key Metal Clamps #6 B * 25 N/A #4 B * 25 N/A #2 B B-106 #1 B B-106 1/2 1/0 B B-106 2/0 B B-106 3/0 B B-106 4/0 B B kcmil B B kcmil B B-106 #6 B N/A #4 B N/A #2 B B-106 #1 B B-106 1/0 B B-106 5/8 2/0 B B-106 3/0 B B-106 4/0 B B kcmil B B kcmil B B kcmil B B kcmil B B-106 For sizes not listed, contact BURNDY. Molds listed are for concentric stranded cable. Add suffix -S to mold number for solid conductors. Molds listed are for copperclad ground rods. For welding to steel, stainless steel or galvanized steel ground rods add suffix -N to mold number. For heavy duty molds, molds with wear plates or molds for Copperweld cable, contact BURNDY. For expedited service, contact BURNDY. Cable Price Weld Handle Grd Rod Tap Mold Number Key Metal Clamps #6 B * 32 N/A #4 B * 45 N/A #2 B B-106 #1 B B-106 1/0 B B-106 2/0 B B-106 3/4 3/0 B B-106 4/0 B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B-106 1/0 B B-106 2/0 B B-106 3/0 B B-106 4/0 B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B-106 Required Tools: Handle Clamps (see chart for correct handles) Sold complete with handles * B Flint Ignitor (included) Other recommended accessories: B Mold Cleaning Brush B Cable Cleaning Brush B File B Cable Clamp Photo by Dennis Gravette For mold types or BURNDYWeld items not shown, please contact factory. Canada: BURNDY LLC US:

66 BURNDY Renewable ProductsWind Grounding BURNDYWeld Exothermic TYPE BCS-1 MOLDS Horizontal Cable to Horizontal Steel Surface Type BCS-1 Molds are used to terminate a horizontal copper cable to any horizontal steel surface. Note that the cable is OFF the surface. Size range is 1/0 through 1000 kcmil solid or concentric stranded copper conductors. Contact BURNDY for information on molds for conductors not listed below. Price Weld Handle Cable Size Mold Number Key Metal Clamps 1/0 B B-106 2/0 B B-106 3/0 B B-106 4/0 B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B-107 For sizes not listed, contact BURNDY. Molds listed are for concentric stranded cable. Add suffix -S to mold number for solid conductors. For heavy duty molds, molds with wear plates or molds for Copperweld cable, contact BURNDY. For expedited service, contact BURNDY. Required Tools: Handle Clamps (see chart for correct handles) B Flint Ignitor Other recommended accessories: B Mold Cleaning Brush B Cable Cleaning Brush B Cable Clamp B Rasp TYPE BCS-8 MOLDS Horizontal Cable to Horizontal Steel Surface Type BCS-8 Molds are used to terminate a horizontal copper cable to any horizontal steel surface. Note that the cable is ON the surface. Size range is #6 through 1000 kcmil solid or concentric stranded copper conductors. Contact BURNDY for information on molds for conductors not listed below. Price Weld Handle Cable Size Mold Number Key Metal Clamps #6 B ** 45 N/A #4 B * 45 N/A #2 B * 45 N/A #1 B * 65 N/A 1/0 B B-106 2/0 B B-106 3/0 B B-106 4/0 B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B kcmil B B-107 For sizes not listed, contact BURNDY. Molds listed are for concentric stranded cable. Add suffix -S to mold number for solid conductors. For heavy duty molds, molds with wear plates or molds for Copperweld cable, contact BURNDY. For expedited service, contact BURNDY. Required Tools: Handle Clamps (see chart for correct handles) Sold complete with frame * B Flint Ignitor (included) Other recommended accessories: B Mold Cleaning Brush B Cable Cleaning Brush B Cable Clamp B Rasp For mold types or BURNDYWeld items not shown, please contact factory. US: BURNDY LLC Canada:

67 Grounding BURNDYWeld Exothermic BURNDY Renewable ProductsWind TYPE BCRE-4 MOLDS Horizontal through Cable to Horizontal Rebar Type BCRE-4 Molds are recommended for horizontal through conductors to horizontal rebar at right angle connections for solid or concentric stranded conductors #6 through 4/0 joined to reinforcing bars #3 through #6 & larger. The high copper content joint has a higher current carrying capacity than the conductors being joined and is impervious to vibration and moisture. Contact BURNDY for information on molds for conductors not listed below. Rebar Cable Mold Packing Price Weld Handle Size Size Number Material Key Metal Clamps #6 B-7708 B B-106 #4 B-7709 B B-106 #2 B-7710 B B-106 #3 #1 B-7711 B B-106 1/0 B-7712 B B-106 2/0 B-7713 B B-106 3/0 B-7714 B B-106 4/0 B-7715 B B-106 #6 B-7716 B B-106 #4 B-7717 B B-106 #2 B-7718 B B-106 #4 #1 B-7719 B B-106 1/0 B-7720 B B-106 2/0 B-7721 B B-106 3/0 B-7722 B B-106 4/0 B-7723 B B-106 #6 B-7724 B B-106 #4 B-7725 B B-106 #2 B-7726 B B-106 #5 #1 B-7727 B B-106 1/0 B-7728 B B-106 2/0 B-7729 B B-106 3/0 B-7730 B B-106 4/0 B-7731 B B-106 #6 B-7732 B N/A #4 B-7733 B N/A #2 B-7734 B N/A #6 #1 B-7735 B N/A & 1/0 B-7736 B N/A Larger 2/0 B-7737 B N/A 3/0 B-7738 B N/A 4/0 B-7739 B N/A For sizes not listed, contact BURNDY. Molds listed are for concentric stranded cable. Add suffix -S to mold number for solid conductors. For heavy duty molds, molds with wear plates or molds for Copperweld cable, contact BURNDY. For expedited service, contact BURNDY. Required Tools: Handle Clamps (see chart for correct handles) Sold complete with frame B Flint Ignitor Other recommended accessories: B Mold Cleaner for cartridge sizes #90-#500 B Mold Cleaning Brush B Cable Cleaning Brush B File PACKING MATERIAL NOTE A packing pad is necessary when making BURNDYWeld connections to rebar. Packing material B is copper shim stock. Packing material numbers B , B and B are a ceramic fiber material and can be used for one connection only. Be sure to specify packing material catalog number when ordering mold and weld metal. For mold types or BURNDYWeld items not shown, please contact factory. Canada: BURNDY LLC US:

68 BURNDY Renewable ProductsWind Grounding BURNDYWeld Exothermic B-106 & B-107 HANDLE CLAMPS BURNDYWeld Handle Clamps make possible the use of many different sizes and types of molds with only two different clamps. The two handle clamps are catalog numbers B-106 and B-107. These will fit 95% of all standard BURNDYWeld molds. 1. Use B-106 clamps for all molds having a price key 4, 7, 17, 22 or 24. These molds are a nominal 3-1/8 3-1/8 square. 2 Use B-107 clamps for all molds having a price key 5, 6, 8 or 23. These molds are a nominal 4 4 square. 3. All molds having a price key 2, 3, 9, 10, 11, 12, 14, 15 or 16 have an attached frame; separate handles are not required. B HANDLE ATTACHMENT This Handle Attachment is used to hold Price Key-14 molds in position. It easily attaches to the B-106 Handle Clamp. This Handle Attachment can be used with weld types BCRE- 1 and BCRE-4. Catalog Number B B Shown Attached to B-106 Handle Clamps B MOLD SUPPORT CLAMP The Mold Support Clamp is used to hold a mold in position on a vertical steel column or angle. It is easily attached to the Handle Clamps. The Mold Support Clamp can be used with weld types BCS-3, BCS-18, BCS-23 and BCS-27. Catalog Number B For mold types or BURNDYWeld items not shown, please contact factory. US: BURNDY LLC Canada:

69 Mechanical Connectors BURNDY Renewable ProductsWind TYPES KS & KS-3 SERVIT For Copper, Copperweld Compact, high strength, high copper alloy SERVIT split-bolt has free-running threads and easy to grip wrench flats. Highly resistant to season cracking and corrosion, the SERVIT provides maximum pressure and assures a secure connection on all combinations of run and tap conductors. Type KS-3 accommodates 3 maximum size conductors. Conductor Copper Copperweld Min. Tap Recommended Catalog Cross Range for Equal with Maximum Run and Tap Tightening Number Flats L W Run and Tap Max. Run Sol. Str. Type A Type D Torque in-lb KS Str. - 8 Str. 14 Str. #8 80 KS Str. - 6 Sol. 14 Str. #6 3 #12 8A 9-1/2D KS Str. - 4 Sol. 14 Str. #4 3 #10 6A 8D 165 KS Str. - 2 Sol. 14 Str. #2 3 #8 4A 6D KS Str. - 2 Str. 14 Str. #1 3 #7 3A 5D 275 KS Str. - 1/0 Str. 14 Str. 2/0 3 #5 2A 4D KS Str. - 2/0 Str. 14 Str. 3/0 7 #7 385 KS Str. - 3/0 Str. 8 Sol. 500 KS Str Str. 4/0 7 #5 KS /0 Str /0 Str. 19 #8 650 KS /0 Str /0 Str. 19 #6 825 Listed torque values are for maximum conductor combinations accommodated. Consult UL486 Tables 7-4, 7-5, 7-6 for smaller conductor combinations. TYPE KPA SCRULUG For Copper Cable High copper alloy tin-plated terminal for joining a wide range of cable to equipment pads or terminal blocks. Especially good in light industrial applications. The tongue and body are a one-piece design. The pressure bar equalizes pressure over the conductor and prevents the screw from cutting into the cable. See note page A-2 In addition to UL Listed for wire connectors and CSA Certified, these items are also UL Listed for direct burial. Fig. 1 Fig. 2 Stud Recommended Catalog Fig. Hole TIghtening Number Wire Range No. C D H K Size L N T Torque in-lb KPA8C 14 Sol. - 8 Str KPA4C 14 Sol. - 4 Str / KPA25 4 Str. - 1/0 Str / KPA28 1/0 Str. - 4/0 Str / KPA34 4/0 Str kcmil / NOTE: For unplated version add UNPL suffix. Canada: BURNDY LLC US:

70 BURNDY Renewable ProductsWind Mechanical Connectors TYPE KA-U Universal Terminal (One Conductor) for Aluminum and Copper Conductors These dual-rated one-conductor lugs are constructed from high strength aluminum alloy and electro tin-plated to provide low contact resistance. Fig. 1 Fig. 2 AL9CU Wire Range Stud Dimensions Recommended Catalog Fig. Aluminum or Hole ** ** Tightening Number* No. Copper Size D L N W E T H Torque in-lb KA6U 1 14 Str. - 6 Str KA2U 1 14 Str. - 2 Str /4 KA25U 1 14 Str. - 1/0 Str KA26U 2 6 Str. - 2/0 Str KA29U 2 6 Str kcmil /16 KA30U 2 6 Str kcmil KA31U 2 6 Str kcmil KA34U 2 4 Str kcmil 3/ KA36U 2 2 Str kcmil KA40U kcmil /2 KA44U kcmil KKA31U-2N 3 6 Str kcmil KA36U-2N 4 2 Str kcmil /2 KA40U-2N kcmil KA44U-2N kcmil * N indicates NEMA standard stud holes. Listed torque values are for maximum conductor sizes accommodated. Consult UL486 Tables 7-4, 7-5, 7-6 for smaller conductor sizes. ** Maximum dimension. US: BURNDY LLC Canada:

71 Mechanical Connectors BURNDY Renewable ProductsWind VERSI-POLE VERSI-POLE 1, 2, 3 Pole Distribution Blocks Run Tap Ampere Optional Catalog Connector Wire Range Wire Range Rating Per Number of Cover Order Number Run Tap AL9CU AL9CU Pole Poles 1 Per Pole 1 BDB-16-2/0-1 AWG 12-2/0 AWG BDBCOVER2 3 1 BDB-26-2/0-1 AWG 14-2/0 AWG BDBCOVER2 3 1 BDB AWG kcmil AWG BDBCOVER1 3 1 BDB AWG kcmil AWG 14-2/ BDBCOVER1 3 1 BDB AWG kcmil AWG 14-2/ BDBCOVER2 3 1 BDB AWG kcmil AWG 14-2/ BDBCOVER1 3 1 BDB AWG kcmil AWG BDBCOVER2 3 1 BDB AWG kcmil AWG 14-2/ BDBCOVER1 3 1 BDB AWG kcmil AWG BDBCOVER1 3 1 BDB AWG kcmil AWG 14-2/ BDBCOVER1 3 1 BDB AWG kcmil AWG 6-4/ BDBCOVER1 3 Canada: BURNDY LLC US:

72 BURNDY Renewable ProductsWind Mechanical Connectors TYPES BIT, BITO, BISR BURNDY UNITAP Clear Insulated Multiple Tap Connectors Tap connections and in-line splice/reduc tions are made quickly and easily with the UNITAP line of connectors. UL486B Listed. Dual-rated AL9CU for any stranded copper or stranded aluminum applications. 600 Volt, 90 C. 2 Port, 1 or 2 Sided Entry Features and Benefits Clear Plastisol covered AL6061-T6 aluminum body. Saves time, lowers installation costs, eliminates taping. Clear Plastisol. Allows visual confirmation that conductor is properly inserted. Catalog # of Wire Range Fig. Number Ports (AWG/kcmil) L W H Hex Key No. BIT4 2 #14 - # /8 1 BITO4 2 #14 - # /8 2 BIT2/0 2 #14-2/ /16 1 BITO2/0 2 #14-2/ /16 2 BIT250 2 # /16 1 BITO250 2 # /16 2 BIT350 2 # /16 1 BITO350 2 # /16 2 BIT600 2 # /8 1 BITO600 2 # /8 2 BIT750* 2 # /8 1 BITO750* 2 # /8 2 * Not UL Listed Oxide inhibitor pre-installed. Inhibits moisture and contaminants from entering the contact area. Range-taking. Reduces number of connectors carried in inventory. Fig. 1 Fig. 2 IN-LINE SPLICER/REDUCER Catalog Wire Range Number (AWG/kcmil) L W H Hex Key BISR2 # /32 BISR1/0 #14-1/ /16 BISR250 # /16 BISR350 # /16 BISR500 # /8 US: BURNDY LLC Canada:

73 Installation Tooling Hydraulic Pumps BURNDY Renewable ProductsWind BURNDY Engineered SystemProvides the utmost in quality and reliability. Photo by Dennis Vee Collector System Terminations Canada: BURNDY LLC US:

74 BURNDY Renewable ProductsWind Installation Tooling Cable Cutters RHCC129ACSR 10,000 PSI Remote Cable Cutter Remote Power Operated Hydraulic Cable Cutter The BURNDY RHCC129ACSR remote hydraulic cable cutter incorporates a specialized latch style cutting head that allows interference-free closure for mid-span cuts. The RHCC129ACSR with its precision cutting blades is capable of cutting up to 1.29 diameter bare or insulated copper and aluminum cable, 1113 ACSR, 5/8 ground rod, 1/2 rebar, 5/8 diameter soft steel bolts, 1/2 standard guy strand, and up to 3/8 EHS guy strand. The RHCC129ACSR is provided with a 5-year limited warranty (excluding blades). Features and Benefits Specialized latch head design. Interference free closure for mid-span cuts. Precision cutting blades. For clean cuts on Cu/Al, ACSR, ground rods, rebar, guy strand, and soft steel bolts. High strength steel cylinder. For durability and long life. Lightweight ergonomic design allows one hand operation. User has one hand free to manipulate material to be cut. Durable canvas carrying bag. Provides tool protection and stores all accessories. 5-year limited warranty on tool (excluding blades). Customer satisfaction and support. SPECIFICATIONS Operating Pressure: 10,000 psi (700 bar) Tool Weight: 5.85 lbs. (2.65 kg) Length: (286 mm) Width: 3.7 (94 mm) FOR USE ON Copper Cable: up to 1.29 Aluminum Cable: up to 1.29 ACSR: up to 1113 ACSR Ground Rod: up to 5/8 Rebar: up to 1/2 Soft Steel Bolts: up to 5/8 Standard Guy Strand: up to 1/2 EHS Guy Strand: up to 3/8 ACCESSORIES Canvas Bag: Replacement Blades: Hot Stick Adapter: Cat# PT Cat# PT (Moving Blade) Cat# PT (Fixed Blade) Cat# RHCCHSA PRECISION CUTTING BLADES HIGH STRENGTH STEEL CYLINDER QUICK DISCONNECT HYDRAULIC FITTING SPECIALIZED LATCH HEAD DESIGN 1.29 CUTTING CAPACITY US: BURNDY LLC Canada:

75 Installation Tooling Cable Cutters BURNDY Renewable ProductsWind PATRIOT PATHCC10-18V SERIES Battery Actuated Tool Hydraulic Self-Contained Cutter The BURNDY PATHCC10-18V series C- head cutter is an innovative compact and mobile cutting tool that allows users to interchange different cutting blades customized for their application. With a C - shaped style head and large opening, it s easy to scoop and cut without the need to open or close a latch. The tool head swivels 355 and comes with a retractable assist handle to help maneuver the cutting head into position. The PATHCC10-18V blade alignment technology ensures a clean cut and maximum blade life. The PATHCC10-18V series tool accommodates four different interchangeable blade types: HCCACSR, HCCSOL, HCCCUAL, and HCCGUY. The PATHCC10-18V series tool comes in a variety of options to include a covered head version (PATHCC10C-18V), and the ability to order the tool with specific blades only. See the table for individual catalog numbers. The PATHCC10-18V series cutters operate on 18-volt Ni-MH batteries. Each tool comes equipped with an impact resistant formed carrying case along with a tool retention lanyard, battery charger and two batteries. The carrying case also has pre-formed pockets to house all four blade types. The PATHCC10-18V series tools are provided with a 5-year limited warranty (excluding blades) and a lifetime power-train warranty on the INFINITY DRIVE. The batteries and charger are provided with a 1-year limited warranty. Tool Catalog Number Blade Provided HCCACSR, HCCGUY, PATHCC10-18V HCCSOL, HCCCUAL PATHCC10ACSR-18V HCCACSR PATHCC10GUY-18V HCCGUY PATHCC10SOL-18V HCCSOL PATHCC10CUAL-18V HCCCUAL PATHCC10* None * The PATHCC10 is an economical solution for those customers already set up with batteries and chargers. The PATHCC10 is strictly the tool and carrying case; it does not include blades, batteries or a charger. Order blades separately. Each BURNDY HCC blade kit is designed specifically for the material it is intended to cut. Each blade is made from high strength tool steel and then hardened to ensure a long life. Each blade kit comes complete with screws and wrench for installation. The HC- CGUY and HCCSOL blade kits are also provided with a blade holder. This holder provides additional support when cutting. The blade table points out the materials each blade is designed to cut. Blade Profiles SPECIFICATIONS Tool Weight: 20.4 lbs Length: 21.4 Width: 3.7 Height: 12.8 Operating Voltage: 18V Recharge Time: < 45 minutes FOR USE ON Reference Blade Table ACSR: up to 1590 (Falcon) EHS guy strand: up to 9/16 Standard guy strand: up to 9/16 Ground Rod: up to 3/4 Rebar: up to 5/8 Soft steel bolts: up to 5/8 Copper: up to 1.50 Aluminum: up to 1.50 ACCESSORIES Battery: Cat# BAT18V Hi-capacity 18V (2.6AH) Chargers: 120V-AC Cat# PATCHGR18V 12/24V-DC Cat# BCT/PATDCCHGR 240/250V-AC Cat# PATCHGR250V Blade Table Catalog Cutting Max. Number Material O.D. HCCACSR ACSR 1590 kcmil HCCCUAL Cu & Al 1.5 (38 mm) Ground Rod 3/4 (19 mm) HCCSOL Rebar 5/8 (16 mm) Soft Steel Bolts 5/8 (16 mm) HCCGUY Std. Guy Wire 9/16 (14 mm) EHS Guy Wire 9/16 (14 mm) The HCCSOL and HHCGUY blade kits include a blade holder for the stationary blade. To order replacement blades without the blade holder order catalog number HCCSOLR- PLBLDS or HCCGUYRPLBLDS. Refined Hydraulic System for Ultra Performance, Speed and Reliability Safety Lanyard Connection Interchangeable Blades Forged Steel Head 11 Ton Output Force Field Proven Electronics for Ultimate Reliability in the Harshest Work Environments Trigger Guard Retractable Assist Handle 18 Volt Ni-MH Battery Canada: BURNDY LLC US:

76 BURNDY Renewable ProductsWind Installation Tooling Cable Cutters PATRIOT PATCUT245CUAL-18V Battery Actuated Tool Hydraulic Self-Contained Cutter The BURNDY PATCUT245CUAL-18V battery powered cutting tool is compact, fast, easy to use and incorporates the latest in battery tool technology. The ergonomic design allows one hand operation so that the other is free to manipulate the conductor in the proper cutting position. The PATCUT245CUAL-18V incorporates a specialized latch style cutting head that allows interference-free closure for mid-span cuts. The cutter head rotates 180 degrees to allow users to get into tight areas easier. The PATCUT245CUAL-18V is capable of cutting up to 2.45 diameter copper and aluminum cable. The PATCUT245CUAL-18V operates on industry standard 18-volt Ni/MH batteries that eliminate voltage depression or memory issues. The PATCUT245CUAL-18V comes equipped with a high impact formed carrying case to hold the tool, a tool retention lanyard, a battery charger and two batteries. The PAT- CUT245CUAL-18V is provided with a 5-year limited warranty (excluding blades), and 1-year on batteries and charger. Features and Benefits Battery powered cutting technology. Easy tool operation and portability. Advance design high-speed pump completes tough cuts faster. Longer life, efficiency, and reliability. Specialized latch head design. Interference free closure for mid-span cuts. Ergonomic design allows one hand operation. User has one hand free to manipulate material to be cut. 180-degree head rotation. Versatile head positioning allows user to get into tight areas easier. Mechanical ram release. Reliable ram release (no battery power consumption). Operates on 18-volt Ni/MH batteries. Eliminates voltage depression or memory issues. Durable high impact formed carrying case. Provides tool protection and stores all accessories. 5-year limited warranty on tool (excluding blades) and 1-year on batteries and charger. Customer satisfaction and support. SPECIFICATIONS Tool Weight: 14.5 lbs. (5.4 kg) With Battery Length: 18 (45.7 cm) Width: 3.75 (9.5 cm) Height: (37.5 cm) Operating Voltage: 18 V-DC Recharge Time: < 45 mins. FOR USE ON Copper and Aluminum Cable: Up to 2.45 O.D (62.2 mm) For Copper and Aluminum cable only. Do not cut steel, ground rod, rebar, or guy wire. ACCESSORIES Carrying Case: Lanyard: Battery: Hi-capacity (2.6 AH) Cat# PT Cat# PT Cat# BAT18V Charger: 120V-AC Cat# PATCHGR18V 12/24V-DC Cat# BCT/PATDCCHGR 240/250V-AC Cat# PATCHGR250V Replacement Blades: Cat# PT (Moving Blade) Cat# PT (Fixed Blade) SAFETY LANYARD AT- TACHMENT 180 HEAD ROTATION SPECIALIZED LATCH HEAD DESIGN PRECISION CUTTING BLADES 2.45 CUTTING CAPACITY ERGONOMICALLY BALANCED TOOL DESIGN TRIGGER GUARD 18 VOLT Ni-MH BATTERY US: BURNDY LLC Canada:

77 Installation Tooling Crimping Tools BURNDY Renewable ProductsWind Y1MRTC HYTOOL #8 #1 Copper HYDENT Terminals, Splices, and #6 #6 Thin-Wall C-Taps Type Y1MRTC mechanical full cycle ratchet HYTOOL will accommodate copper compression HYDENT connectors for #8 through #1 code conductor, #8 through #2 Class I flexible strand copper conductor, and #2 solid. The color coded die wheel rotates to provide a proper match of the die and color coded connector. The die index is embossed on the crimped connector for permanent inspectability. A ratchet mechanism assures the tool must complete a full cycle before releasing. SPECIFICATIONS Length: Height: 2.72 (closed) Width:.73 Weight: 1.7 lbs. Wire Range: #8-#1 code conductor, #8-#2 Class I Flex, #2 Solid Up to #6-#6 (Brown) type YC-L C-TAP BENEFITS Rotating die is color coded to match color coded connectors Die index embossment allows permanent inspectability of installed connectors to insure consistently reliable and dependable connections. Molded comfort grips reduce fatigue during continuous use. Ratchet mechanism assures a complete crimp every time. Emergency release mechanism allows tool to be removed from connector in case of mistaken die choice or to reposition tool. 5-year limited warranty. FOR USE ON Cu Lug and Splice Connectors # of Crimps Connector Die Per Barrel Copper Catalog Index # Length Wire Size Types (Color) Std Long YA8C- # 8 AWG YS8C- 49 Code & Flex YAV8C- (Red) 1 2 YSV8C- #6 AWG YA6C- Code YS6C- 7 #6 AWG YAV6C- (Blue) 1 2 Code & Flex YSV6C- #4 AWG YA4C- Code YS4C- 8 #4 AWG YAV4C- (Grey) 2 4 Code & Flex YSV4C- #3 AWG YA3C- 9 #2 Sol. YS3C- (White) 2 4 #2 AWG YA2C- Code YS2C- 10** #2 AWG YAV2C- (Brown) 2 4 Code & Flex YSV2C- #1 AWG YA1C- 11** Code YS1C- (Green) 2 4 ** Die Index 10 (Brown Die) and 11 (Green Die) use the same die wheel crimp groove. Die Index Number Embossment on Connector after Crimp for inspection verification. Y1MRTC Wire Range: #8-#1 AWG Class B, #8-#2 Class I Flex. #2 Solid & #3 Stranded Y1MRKIT Kit Contains: Y1MRTC Full-cycle Ratchet Tool Sturdy Metal Carrying Case Terminals: YA8CL, YA8CL1, YA6CL, YAV6CLTC14FX, YA4CL, YAV4CLTC14FX, YA2CL, YAV2CLTC516FX, YA1CL Splices: YS8CL, YS6CL, YS4CL, YS2CL, YS1CL Y1MRTCKIT Kit Contains: Y1MRTC Full-cycle Ratchet Tool Sturdy Metal Carrying Case Terminals: YA8CL2TC14, YA8CL2TC38, YA6C2TC38, YA6CL2TC14, YA6CL2TC14E1, YA6CL2TC14E2, YA6CL2TC38, YAV6CL2TC14E2FX, YAV6CL2TC14FX, YA4CL2TC14, YA4CL2TC38, YA3C2TC38, YA2C2TC38, YA2CL2TC38, YA2CL2TC14 Thin-Wall C-Taps: YC4L12 Cu C-Tap Connectors Wire Size Cu Str. Catalog AWG Die Index # # of Number Run Tap (Color) Crimps YC10L (Red) YC8L (Blue) 1 YC6L (Grey) 1 YC4L , (Brown) 2 Canada: BURNDY LLC US:

78 BURNDY Renewable ProductsWind Y750BHXT AND Y750CBHXT RUBBER COVERED HEAD 12 Ton HYPRESS Remote Power Operated Hydraulic Tool Conductor Range: # kcmil AL/CU # kcmil ACSR 12 ton remote power operated hydraulic tool. The Y750BHXT HYPRESS incorporates a wide mouth (1.65 ) C-shaped head for all compression applications. The hook style head provides for easy tapping, splicing, and terminating of overhead lines as well as the full range of HYGROUND compression grounding system connectors, NEC cable connections and N30 - N650 Navy cable applications. All standard BURNDY U dies fit the Y750BHXT and Y750CBHXT HYPRESS. Dies and accessories sold separately. The Y750CBHXT has a permanently molded rubber covered head and includes a separate rubber molded boot that covers the lower body and hydraulic fitting for tool impact protection. 5-year limited warranty. Remote Head for Use With U Style Dies FEATURES BENEFITS Covers a wide range of applications and provides easy tool removal from continuous conductors with its C-shaped head (1.65 opening). Easy die change out and retention with exposed positive die lock buttons. Uses all standard BURNDY U-dies. Y750CBHXT provides molded rubber covering on head, body and hose fittings. Hot stick adapter sold separately. Infinitely rotatable head, so hydraulic couplers won t easily loosen. 5-year limited warranty. C - Shaped Head Both Die Release Buttons Exposed Installation Tooling Crimping Tools SPECIFICATIONS Operating pressure: 10,000 psi Force developed: 12 tons Jaw opening: 1.65 (42 mm) Length: 12.8 (325 mm) Weight: 10.3 lbs. (4.7 kg) Head width: 5.2 (132 mm) FOR USE ON Tension Sleeves Copper #8 sol kcmil Aluminum #6 sol kcmil ACSR # kcmil Taps Copper #14 solid kcmil Aluminum #6-500 kcmil Aerial Cable Copper #6-500 kcmil Terminals and Splices Aluminum #8-750 kcmil Copper #8-750 kcmil ACSR #4-556 kcmil HYGROUND (Compression Grounding) Copper #6-500 kcmil (cable/ground rod) Ground Rods 1/2-1 Diameter ACCESSORIES: Cat. No. PT PT PT29291 WIREMIKE Description Adjustable head grip for joining head to universal hot sticks. Force test gauge for accurate visual reading of output force. Die Case Steel case for storage and protection of U dies. Provides quick and easy identification of commonly used conductors. Quick Disconnect Hydraulic Fitting Large 1.65 Jaw Opening to Accommodate Asymmetrical Connectors US: BURNDY LLC Canada:

79 Installation Tooling Crimping Tools PATRIOT HIGH PERFORMANCE PAT750XT-18V Battery Actuated Tool Hydraulic Self-Contained 12 Ton Crimping Tool The BURNDY PATRIOT High Performance PAT750XT-18V tool is 25% faster than previous models. In addition to faster crimp cycles, the High Performance PAT750XT-18V has newly designed electronics that are field proven for ultimate reliability and proven to handle the harshest work environments. The High Performance PAT750XT-18V incorporates the latest engineering technology with a refined hydraulic system for ultra performance, speed and reliability. All PATRIOT tools feature the BURNDY INFINITY DRIVE transmission which has a lifetime warranty. The High Performance PAT750XT-18V features BURNDY s Y750 tool head, capable of using all U style dies, and incorporates a bearing and alignment guide for use on HYGROUND and other asymmetrical connectors. Features reliable head rotation design for operation in virtually any position. All PATRIOT battery actuated hydraulic tools provide a consistent, reliable connection every time. Each PATRIOT tool uses standard BURNDY dies and off-the-shelf connectors available world-wide. Supplied with a durable high impact formed carrying case to hold the tool, battery charger, two batteries, tool retention lanyard, and die compartment to hold U die sets. (Dies sold separately.) All BURNDY PATRIOT 18V series tools are provided with a 5-year limited warranty. BURNDY Renewable ProductsWind Features and Benefits Refined hydraulic system for ultra performance, speed and reliability. Field proven electronics for ultimate reliability in the harshest environments. True, one-handed operation for advance, retract, and hold. 12 tons of output force for use on virtually all compression applications. State of the art crimping head design, 360 head rotation lets user get into tight areas easier. Allows use of standard BURNDY dies already in use. Ergonomically balanced tool design eases operation and helps lessen fatigue. Durable high impact formed carrying case provides superior protection and stores all accessories. PAT750CXT-18V with rubber covered head is available. 18 volt Ni-MH battery eliminates voltage depression (memory issues). 5-year limited warranty on tool. Lifetime warranty on INFINITY DRIVE. 1-year warranty on batteries and charger. Refined Hydraulic System for Ultra Performance, Speed and Reliability SPECIFICATIONS Output force: 12 tons (10.9 metric tons) Tool Weight: 16.5 lbs (7.5 kg) With Battery Length: (40 cm) Width: 3.5 (8.89 cm) Height: 13.5 (34.29 cm) Operating Voltage: 18 V-DC Recharge Time: < 45 minutes FOR USE ON Tension Sleeves Copper #8 sol kcmil Aluminum #8 sol kcmil ACSR # kcmil Taps Copper #14 sol kcmil Aluminum #8-500 kcmil Aerial Cable Copper #6-500 kcmil Terminals & Splices Aluminum #8-750 kcmil Copper #8-750 kcmil ACSR #4-556 kcmil HYGROUND Copper #8-500 kcmil (cable/ground rod) Ground Rods 1/2-1 Diameter ACCESSORIES Battery: Cat# BAT18V Hi-capacity (2.6 AH) Chargers: 120V-AC Cat# PATCHGR18V 12/24V-DC Cat# BCT/PATDCCHGR 240/250V-AC Cat# PATCHGR250V Lanyard: Cat# PT Safety Lanyard Connection Large Jaw Opening to Accommodate Asymmetrical Connectors Rotational Head for Use with U Style Dies Ergonomically Balanced Tool Design 12 Ton Output Force Field Proven Electronics for Ultimate Reliability in the Harshest Work Environments Trigger Guard 18 Volt Ni-MH Battery Canada: BURNDY LLC US:

80 BURNDY Renewable ProductsWind Y46 AND Y46C HYPRESS 15 Ton Force Remote Operated Hydraulic Tool 10,000 PSI Installation Tooling Crimping Tools SPECIFICATIONS Y46 Y46C Force developed: 15 Tons 15 Tons Operating pressure: 10,000 psi 10,000 psi Jaw opening: 2 2 Maximum width: 4-1/2 4-3/4 Overall length: /4 (incl. boot) Weight (less case): 16 lbs. 17-1/2 lbs. Molded Covering: No Yes The Y46 standard tool and Y46C rubber covered tools are lightweight, compact and versatile with installation dies for both circumferential and nest-indentor types. Accessories include U- die adapter, a cable cutting die for 1.2 diameter non-steel conductors, plus a lifting eye and universal hot-stick adapter for overhead line construction. 5-year limited warranty. BENEFITS Compact C shaped head allows easy placement and removal from continuous conductor lengths. Versatile and economical-hypress tools work on all commonly used copper and aluminum products. Dies and adapters lock into or remove from tool head easily with the positive push button die locks. Safety, strength and high quality is provided with strong forged steel and precision machined components. Excellent for HYGROUND compression grounding applications through 1 ground rods and up to 500 kcmil taps, terminals and splices. Compression terminal, splice and tap connectors are UL listed and CSA certified when installed with the Y46 and Y46C HYPRESS and recommended die set. Y46C has a permanently molded head of 3/16 rubber and includes a separate molded rubber boot to cover the lower HYPRESS body and hydraulic coupler for impact protection. FOR USE ON Connector Conductor Type Range Copper Terminals-grounding to 500 kcmil #8 AWG str.- YGA, YGHA, YGF 1500 kcmil Terminals-Uninsulated #8 to Code Cable 1500 kcmil YA, YA-2N, YA-L, Navy Cables YA-LB, YA-TC, YA-2LN, YAB-4N, Flexible and Extra Flexible YAV-L Box, YAV-L, YAV-RS Box, 1/2-1 Ground Rods YAV-RS, YA-TC-FX Terminals-Insulated #8 to 2/0 YAEV-L Box, YAEV-L, YAEV-H, YAEV-RS, YAEV-RH Splices #8 to 1500 kcmil YS, YS-T, YS-L, YS-LB, YST, YSP-T, YGS, YGHS Taps YH, YCHC #14 to 1000 kcmil YC-C to 4/0 AWG Taps-Grounding to 500 kcmil YGHC-C, YGHP-C, YGHR-C Aluminum Terminals #8 AWG- YA-A, AYP, AYPO 1250 kcmil Splices Code Cables YS-A, YS-AT, YRB Taps YFD, YFN, YFO, YFR ACSR See BURNDY Overhead Transmission and Distribution Catalog Module FORGED STEEL BODY POSITIVE PUSH BUTTON DIE LOCK LARGE 2 JAW OPENING STRONG RE- INFORCED BACK FEATURES PRECISION MA- CHINED STEEL COMPONENTS MALE QUICK DISCONNECT 10,000 PSI HYDRAULIC FITTING ACCESSORIES: Cat. No. P15K Cutter die max. 1.2 dia. PUADP-1 U -die adapter PT10121 Lifting eye PT10128 Universal hotstick adapter-y46 Y46-2 Same as Y46 with Female coupler US: BURNDY LLC Canada:

81 Installation Tooling Crimping Tools BURNDY Renewable ProductsWind PATRIOT PAT46-18V Battery Actuated Tool Hydraulic Self-Contained 15-Ton Crimping Tool The BURNDY PATRIOT PAT46-18V incorporates the latest engineering technology with a patented high speed hydraulic pump. Our battery actuated hydraulic tool provides a consistent, reliable connection every time. The PAT46-18V features BURNDY s Y46 tool head, capable of using all P and U style dies. Each PATRIOT uses standard BURNDY dies and off-the-shelf connectors available worldwide. Supplied with a durable high impact formed carrying case to hold the tool, battery charger, two batteries, tool retention lanyard, and die compartments to hold both P and U die sets (dies sold separately). All BURNDY PATRIOT PAT46 tools are provided with a 5-year limited warranty. PAT46C-18V with rubber covered head is available. Safety Lanyard Connection 15 Ton Output Force Features and Benefits BURNDY s largest battery actuated crimp tool, providing 15-tons of output force with a 2 jaw opening. Allows users to install the largest variety of splices, taps and terminals with one tool. Also provides easy placement and removal from continuous conductor lengths. State of the art C-Head crimp design with 355 head rotation. Versatile tool head positioning lets user get into tight areas easier. Retractable assist handle under head of tool for better handling of tool. Allows for better balance of tool and retractable for getting head into tight areas. Durable high impact formed carrying case. Provides superior protection and stores all accessories. 18-volt Ni-MH battery eliminates voltage depression (memory issues). Less down-time due to high capacity, high voltage 18-volt battery 5-year limited warranty on tool. 1-year warranty on battery and charger. Positive Push Button Die Lock Large 2 Jaw Opening Forged Steel Head Retractable Assist Handle SPECIFICATIONS Output Force: 15 tons (13.6 metric tons) Weight: 26.2 lbs. (11.88 kg) Length: (52.76 cm) Height: (36.65 cm) Width: 3.70 (9.40 cm) Operating Voltage: 18V-DC Battery Recharge Time: <45 minutes FOR USE ON Connector Conductor Type Range Copper, Terminals, grounding: to 500 kcmil #8 AWG str. - YGA, YGHA, YGF 1500 kcmil Terminals, uninsulated: #8 to Code Cable, 1500 kcmil: YA, YA-2N, YA-L, Navy Cable, YA-LB, YA-TC, YA-2LN, YAB-4N Flexible and YAV-L Box, YAV-L, YAV-RS Box, Extra Flexible YAV-RS, YA-TC-FX 1/2-1 Terminals, insulated: #8 to 2/0 Ground Rods YAEV-L Box, YAEV-L, YAEV-H, YAEV-RS, YAEV-RH Splices: #8 to 1500 kcmil YS, YS-T, YS-L, YS-LB, YST, YSP-T, YGS, YGHS Taps: YH, YCHC #14 to 1000 kcmil, YC-C to 4/0 AWG Taps, grounding: to 500 kcmil YGHC-C, YGHP-C, YGHR-C Aluminum Terminals: #8 AWG - YA-A, AYP, AYPO 1250 kcmil Splices: Code Cables YS-A, YS-AT, YRB Taps: YFD, YFN, YFO, YFR ACSR See BURNDY Overhead Transmission and Distribution Catalog Module ACCESSORIES Cutter Die: Cat# P15K Die max. 1.2 dia. U Die Adapter: Cat# PUADP-1 Battery: Cat# BAT18V High Capacity Ni-MH (2.6 AH) Chargers: 120V-AC 12/24V-DC 240/250V-AC Cat# BATCHGR18V Cat# BCT/PATDCCHGR Cat# PATCHGR250V Trigger Guard 18-Volt Ni-MH Battery Canada: BURNDY LLC US:

82 BURNDY Renewable ProductsWind Y10AC9 Electric Hydraulic Pump Hydraulic Output Pressure of 10,000 PSI The Y10AC9 electric hydraulic pump is for use with all HYPRESS heads and cutters requiring 10,000 PSI operating pressure.the Y10AC9 is equipped with a built-in, factory set pressure relief valve. An audible pop and recycling of the pump as well as relaxing of the hose signal completion of the crimping/cutting cycle. Pump is supplied with a durable handheld electric pendant switch. Installation Tooling Hydraulic Pumps Specifications Motor: 115V AC 50/60 Hz 5/8 HP, 10,000 rpm 11 amp current draw Reservoir Volume: 1.61 quarts Height: Base: Weight: 28 lbs. (with oil) FOR USE ON Y34BH, Y35BH, Y35BH4, Y39BH, Y45, Y46, Y46C, Y750BHXT, Y750CBHXT, Y644MBH, Y4PC834MBH, Y81KFTMBH, Y60BHU, RHCC129ACSR, RHCC245CUAL Features and Benefits Lightweight, small size. Easy to lift, carry and transport tool around job site with lightweight body and handle. Factory set relief valve. High quality crimps are achieved with built-in, factory set pressure relief valve and audible recycling of pump to signal completion of crimp cycle. 100,000 (+) life cycles. Long durable life expectancy with lightweight cast aluminum reservoir body. Convenient 115V AC electric powered motor. Saves time with quick disconnect hydraulic fitting. Sealed electric pendant switch. Easy operation with durable remote pendant switch with 10-foot cord. 5-year limited warranty. ACCESSORIES Catalog Number: YAC-CASE Steel carrying case with handle and locking latch. The BURNDY Y10AC9OEM is an additional electric hydraulic pump offering that comes equipped with a foot switch and jog-andhold feature. Keep both hands on the connection with the Y10AC9OEM pump kit. For further details please contact customer service. 5/8 HP Motor Quick Disconnect Hydraulic Coupler Pendant Switch with 10 Cord 1.6 Quart Reservoir Oil Level Window US: BURNDY LLC Canada:

83 Installation Tooling Hydraulic Pumps BURNDY Renewable ProductsWind EPAC10, EPAC8, AND EPAC6 EPAC Series Electric/ Hydraulic Pump, Air Control Hydraulic Output Pressures of: 10,000 PSI, 8,800 PSI, and 6,000 PSI The EPAC10, EPAC8, and EPAC6 electrically driven hydraulic pumps feature exclusive automatic or manual jog and hold operation control provided by a unique air control switch, which provides the safest operation method of any pump available. All EPAC s are remotely controlled by an improved air control switch which electrically isolates the operator from the unit, and can be operated by either hand or foot activation. A three (3) position toggle switch mounted on the control box allows the operator to select either full automatic, off, or manual operation. The automatic mode advances the remote tool into a hold position without crimping the connector so the operator can inspect the orientation before completing the crimp. Once the crimp is completed, the pump auto - matically turns the pump off, allowing the retraction of the remote tool and resets itself for the next operation. The manual position allows the operator to jog the tool forward without the tool ram retracting. To retract the tool prior to completing the crimp, turn the control switch to off, the pump will stop and the tool will retract. In the manual mode the pump advances only while the control is being depressed. To complete a crimp, squeeze and hold the air control switch until the pump reaches the pre-set pressure and shuts off. The EPAC Series of electrically driven hydraulic pumps incorporate a heavy-duty roll cage design that is both rugged and portable. All EPAC Series pumps have been life cycle tested to over 100,000 cycles without failure, and are warranted to be free of defects in material and workmanship for five (5) years when properly maintained and operated. FEATURES Roll cage 3 position switch and control box Factory set output pressure Quick disconnect hydraulic coupler Oil level window 8 quart reservoir BENEFITS Permits final inspection of connector before completing crimp cycle. Extra supply hydraulic fluid 8-quart reservoir. Full automatic or manual Jog and Hold cycles. Operator safety with power loss smart circuit, freezes unit in event of power disruption. Method of operation desired is permitted with 3-position selection switch. Safety is provided against hazardous shock with airbulb actuator and air line. Saves time with quick disconnect hydraulic fitting. Windows allows easy inspection of proper oil level. High quality crimps are achieved with built-in factory set pressure release valve. 5-year limited warranty. SPECIFICATIONS Motor: 1/2 HP 115/230 V-AC, 60 Cycle (EPAC**-2 versions): 1/2 HP 220/230 V-AC, 50 Cycle Maximum current draw: 10 amperes Reservoir volume: 8 quarts max., 2 quarts min. Height: 17-1/2 Base: 11-3/4 18-1/2 Dry weight: 68 lbs. (82 lbs. w/max. fluid) (1/ RPM) FOR USE ON EPAC10 10,000 Y34BH, Y35BH, EPAC10-2 Y35BH-4,Y39BH, Y45,Y46,Y46-C, Y60BHU, Y750BH, Y750BH-2, Y644MBH, RHCC Series Cutters EPAC-8 8,800 Y48BH EPAC-6 6,000 Y35L Canada: BURNDY LLC US:

84 BURNDY Renewable ProductsWind Installation Tooling Hydraulic Hoses and Accessories HYDRAULIC HOSES ACCESSORIES ACCESSORIES Non Conductive Hoses* 10,000 PSI Cat. No. Description PT /4 diameter - non conductive hose with stackable couplers (male/female) - orange PT /16 diameter - non conductive hose with stackable couplers (male/female) - orange PT /16 diameter - non conductive hose with stackable couplers (male/female) - orange PT /4 diameter - non conductive hose with stackable couplers (male/female) - orange PT /4 diameter - non conductive hose with stackable couplers (male/female) - orange PT /4 diameter - non conductive hose with stackable couplers (male/female) - orange NOTE: 1/4 diameter hose provides higher flow rate for faster ram movement. * For proper care and maintenance of hydraulic hoses, consult the Hydraulic Hose Care manual, Form No Hydraulic hoses have a 1-year warranty. ALFLUID ALFLUID QT. ALFLUID GAL. (available in quart and gallon size containers) Use ALFLUID in hand operated tools during extended use below 32 degrees. All weather Hydraulic Fluid for BURNDY pumps: HP hand pump FP foot pump GP gasoline pump EPP. electric pump AC-3H auto/man. elect. pump DC-3H auto/man. elect. pump In-line Pressure Gauge 10,000 psi operating pressure for hydraulic pumps PT PT Force Test Gauge The PT Force Test Gauge is designed to provide an accurate visual reading of the output force produced by the handhydraulic Y35, Y35-2, Y39 and Y750 HYPRESS tools. It is not recommended for any remote powered HYPRESS heads such as the Y35BH. The PT Force Test Gauge is factory calibrated and inspected to very stringent tolerances providing the customer accuracy and an excellent means for quality assurance control. Supplied with padded storage case. BENEFITS Easy to read Provides means for quality assurance control. Blank (test) U dies are provided for testing procedure. Tool output force is applied to load cell for visual read out of the resulting force on the dial. The blank (test) U set is included with the Force Test Gauge. An easy to read operating and main tenance manual is included. US: BURNDY LLC Canada:

85 Wire Management System The SmartCart BURNDY Renewable ProductsWind BSC2H The SmartCart 2 Wheeled Heavy-Duty Carts BURNDY The SmartCart is a versatile wire management system consisting of a two and/or four wheeled cart, various size wire racks for carrying spools of wire and stationary storage units to store racks when not in use. The SmartCart wire management system will assists the electrical contractor with wire installations, improves wire storage and will save time and labor. These heavy-duty carts are rated for 600 lbs. capacity. The SmartCart wire management system is provided with a 1-year limited warranty. Features and Benefits Order as standard configuration or customize to your needs with various size racks Two holders provided for up to 1 conduit benders Built in tray to hold fish tapes and tools Handles are pre-dimpled for mounting material toolboxes (MTB and MTX) Base plate is pre-punched to accommodate mounting of the wire guide and extension base plate Spools are easily changed by placing rack on its side, removing hitch pin and shaft, roll-out and roll-in desired new spool Motionless vise attached to the back of the carts for cutting 1/2, 3/4 and 1 conduit Rated for 600 lb. capacity BSC2H 2 wheeled Heavy-Duty Cart, standard cart without racks. Catalog Approx. Number Description Ship Weight BSC2H 2 Wheeled Heavy-duty SmartCart without racks 37 lbs. BSC2H5A 2 Wheeled Heavy-duty SmartCart with five R17A racks 62 lbs. BSC2H3A2B 2 Wheeled Heavy-duty SmartCart with three R17A and two R22B racks 64 lbs. BSC2H5B 2 Wheeled Heavy-duty SmartCart with five R22B racks 67 lbs. R22B R17A BSC2H3A2B Cart equipped with three 17 and two 22 wide removable racks for 7-1/2 diameter wire spools. The racks allow for a capacity to carry up to twenty-two 14 ga. wire spools. Excellent cart for both service work and installation work. ACCESSORIES EBP MTB MTX R22B Extension Base Plate Standard Material Tool Box, 11 L 6 W 5 D Standard Material Tool Box with Dividers, 6-pockets, 3-5/8 L 3 W 3 D 22 wide removable rack for 7-1/2 diameter reels with 1/2 EMT shaft R17A 17 wide removable rack for 7-1/2 diameter reels with 1/2 EMT shaft Canada: BURNDY LLC US:

86 BURNDY Renewable ProductsWind Substation Connectors SUBSTATION CONNECTORS Experience For more than 80 years, BURNDY has provided High Voltage interconnection solutions to the industry. Throughout this period, BURNDY has developed Substation connectors designed for reliability and ease of installation. Connectors are designed to run cooler than the conductors being joined to provide optimum performance under all operating conditions. Technology BURNDY was the first connector company to design 1000 kv+ substation connectors. The continuous research and development effort deployed by BURNDY for the Substation fittings provides improved designs and manufacturing techniques that are both incorporated in our existing products and new product offering. Finally, BURNDY s continuous participation to the U.S. and International Substation standard committees ensures the compliance of our products to applicable industry standards. Answers With more than 6,000 connectors already tooled up, BURNDY is able to fulfill most of the Renewable Energy Industry needs. Should a wind or solar farm project require a specific connector configuration, our reactive and dedicated design team will provide a solution to your application. BURNDY Substation Product Range Includes Connectors for Substation Grounding Complete range with Mechanical, Compression, and Exothermic. See Grounding pages of this catalog. HV Mechanical Bus Connectors Aluminum and Copper Bus Supports, Terminals, Tees... EHV Connectors Aluminum Bus Supports, Terminals, Tees... HV Equipment Interface Connectors Stud terminals, bar clamps and taps, transformer adaptors US: BURNDY LLC Canada:

87 H W U J B L T BURNDY Renewable ProductsWind HV Mechanical Bus Connectors Substation Connectors BUS TERMINALS TYPES NAS, NAH Terminal for Copper Cable High copper alloy reversible cap terminal for joining a wide range of cable to equipment pads. Tongue is side formed to provide adequate clearance and terminal is designed for one-wrench installation. Fig. A Fig. B Fig. C Fig. 1 Fig. D Fig. E Copper Cable Range Catalog Fig. Complete Small Large Number No. Cable Range Groove Groove B H J Dia. L T W NAH34-2N 1A 1/0 Sol. (.325 Dia.) to 1/0 Sol. (.325 Dia.) to 250 kcmil (.575 Dia.) to / NAH34-34N 1E 500 kcmil (.813 Dia.) 4/0 Str. (.529 Dia.) 500 kcmil (.813 Dia.) / NAH40-2N 1A 2/0 Sol. (.365 Dia.) to 2/0 Sol. (.365 Dia.) to 500 kcmil (.813 Dia.) to 800 kcmil (1.031 Dia.) 500 kcmil (.813 Dia.) 800 kcmil (1.031 Dia.) / NAH44-34N 1E 4/0 Str. (.528 Dia.) to 4/0 Str. (.528 Dia.) to 750 kcmil (.998 Dia.) to 1000 kcmil (1.152 Dia.) 750 kcmil (.998 Dia.) 1000 kcmil (1.152 Dia.) / Other Available Bus Terminals: Type NA Tube to Flat Type N2AH Two Cables to Flat Type NA-A Tube to Flat BUS COUPLERS Type NBC-A Tube to Flat Type XA Tube to Flat, Expandable Type VA, VVA Cable to Flat (Terminal) Type XA-A Tube to Flat Type NAR-A Cable to Flat For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. Type NS Tube to Tube Type XP Tube to Tube Type NS-A Tube to Tube Canada: BURNDY LLC US:

88 Substation Connectors BURNDY Renewable ProductsWind HV Mechanical Bus Connectors BUS TEE CONNECTORS TYPE NHNT Bus Tee Cable to Cable High copper alloy reversible T-Connector for joining a wide range of run and tap cables. Connector is designed for one-wrench installation. H heavy duty 1/2 hardware. Commercial Copper Cable Range Complete Complete Run Cable Small Large Tap Cable Small Large Catalog Range Run Run Range Tap Tap Number A ➀ Groove Groove AA ➀ Groove Groove NHNT3434 NHNT4844 1/0 Sol. 1/0 Sol. 250 kcmil 1/0 Sol. 1/0 Sol. 250 kcmil (.325 Dia.) (.325 Dia.) (.575 Dia.) (.325 Dia.) (.325 Dia.) (.575 Dia.) to 500 kcmil to 4/0 Str. to 500 kcmil to 500 kcmil to 4/0 Str. to 500 kcmil (.813 Dia.) (.529 Dia.) (.813 Dia.) (.813 Dia.) (.529 Dia.) (.813 Dia.) 500 kcmil 500 kcmil 1500 kcmil 4/0 Str. 4/0 Str. 750 kcmil (.813 Dia.) (.813 Dia.) (1.412 Dia.) (.529 Dia.) (.529 Dia.) (.998 Dia.) to 2000 kcmil to 1500 kcmil to 2000 kcmil to 1000 kcmil to 750 kcmil to 1000 kcmil (1.632 Dia.) (1.412 Dia.) (1.632 Dia.) (1.152 Dia.) (.998 Dia.) (1.152 Dia.) Photo by Dennis Gravette Substation Terminations US: BURNDY LLC Canada:

89 BURNDY Renewable ProductsWind HV Mechanical Bus Connectors Substation Connectors BUS TEE CONNECTORS Other Available Bus Tee Connectors: Type NT Tube to Tube Types NSNT/NHNT Tube to Cable Type VT Cable to Cable Type NNT-A Tube to Tube Type NNTR-A Tube to Cable, Cable to Cable For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. BUS SUPPORTS TYPE UH Bus Support for Copper Tube High copper alloy bus support for mounting tube on a post or pedestal type insulator. Single bolt allows rotation to any angle. Rotate cap 180 for slip or rigid fit. One-wrench installation. Supplied with hardware for mounting to cap of insulator. Copper Catalog Conductor Bolt Number IPS A Circle B G H J K W UH14-3 3/ / /8 3/8 9/16 2-5/8 UH / /16 2-1/4 3-1/2 1/2 9/16 3-1/2 UH /4 4-3/8 1/2 9/16 4-5/8 Other Available Bus Supports: Type UHR Bus Support, Tube or Cable Type UHG-A Bus Support, Tube Types LH, LHR Bus Support, Tube or Cable Type UHKR-A Bus Support, Tube or Cable For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. Canada: BURNDY LLC US:

90 Substation Connectors BURNDY Renewable ProductsWind EHV Welded Bus Connectors BUS TERMINALS TYPE SWA Bus to Two or Four Hole Pad (offset terminal) Self-Shielding up to 550 kv when used with Shielding Caps Material: Cast 356 Aluminum Alloy Catalog Number Accommodates A IPS (Schedule 40) EHPS (Schedule 80) Dia. Alum. Tube Fig. B G L T SWA18A-34N SWA58A-34N 2 (2.375 Dia.) B [32] [44] [149] [13] SWA22A-44N SWA92A-44N 4 (4.500 Dia.) C [51] [72] [191] [19] SWA86A-44N SWA96A-44N 6 (6.625 Dia.) C [64] [102] [201] [25] Other Available Bus Terminals: Expansion SWXA-A-N 550 kv Expansion SWXA-A-NK 345 kv BUS COUPLERS Straight Cable SWA-A-N 550 kv Light Design WSLB-A 550 kv Center Formed Tubing SWAC-A-N 550 kv Standard Design WS-A 550 kv For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. Expansion SWXP-A-A 550 kv US: BURNDY LLC Canada:

91 BURNDY Renewable ProductsWind EHV Welded Bus Connectors Substation Connectors BUS SUPPORTS TYPE SWHRH Fixed or Slip Fit Bus Support to Insulator Self-Shielding up to 550 kv When used on corona free Post Insulators. Material: Cast 356 Aluminum Alloy Aluminum Catalog Number Catalog Number Conductor 3 Bolt Circle 5 Bolt Circle 3 Bolt Circle 5 Bolt Circle IPS/EHPS A Dia. G H K L W K L W SWHRH18A-3CH SWHRH18A-5CH [60] [70] [116] 6.26 SWHRH22A-3CH SWHRH22A-5CH [159] [114] [114] [191] [14 19] [197] [18 22] [238] [219] SWHRH86A-3CH SWHRH86A-5CH [168] [140] [247] [219] Other Available Bus Supports: Slide SWSUH-A 550 kv Vertical SWVH-A 550 kv Rigid SWOH-A 550 kv Expansion SWXHP-A 550 kv For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. BUS TEE CONNECTORS Tap-off Pad SWAB-A-N V Tap SWAT-A-A-30 Standard T SWT-A-A 90 Degree Elbow SWL-A 550 kv 75 Degree T SWT-A-A-75 SPACERS AND OTHER BUS FITTINGS Single Bolt Spacer S2GBP-A 550 kv Two Bolt Bus Support SH2GBP-A-B2 550 kv Four Bolt Tap S2GBPA-AB4 550 kv Shielding Cap (Two Piece) STS-A-N 550 kv Shielding Cap (One Piece) STS-A-NCG 550 kv End Plug WLB-A 550 kv Corona Bell SCB-A 500 kv Ground Stud SWCB-A 500 kv Canada: BURNDY LLC US:

92 Substation Connectors BURNDY Renewable ProductsWind HV Equipment Interface Connectors HV EQUIPMENT INTERFACE CONNECTORS TYPE FD Stud Connector For Stud to Flat Bar High copper alloy stud connector allows bolting cable and tubing terminals to equipment studs. Hex head captured bolts provide onewrench installation. One pad contact surface is on centerline of stud. Pad is finished on both sides. All pads are four hole NEMA drilled. Nominal Catalog Stud Ampere Number A Rating ➀ B C D J L N T FD655C /8-12 FD655D / FD66D6 1-1/ FD67C /2-12 FD67D / FD68D NOTES: ➀ Indoor Rating 2. Contact factory for other variations in drilling, plating, etc. Other Available HV Equipment Interface Connectors: Type NDR Stud Connector, Cable, Tube, Flat Bar Type E-C-G Transformer Tap Adapter Type HFB-P1 Bar Clamp Type HFBW Bar Clamp Type FCB Transformer Tap Adapter Type QGFL Bar Tap, Cable to Flat Type HFB-N Tap Pad Adapter For other HV and EHV bus connectors, please see Sections L & M of the 2009 Master Catalog. US: BURNDY LLC Canada:

93 Installation Data BURNDY Renewable ProductsWind PRESENT INSTALLATION TOOL INDEX This chart provides a cross-reference between die index numbers marked on BURNDY COMPRESSION CONNECTORS and the CORRESPONDING DIE SETS used with the various BURNDY INSTALLATION TOOLS. This is the only way to have a BURNDY compression system. A die index number has been assigned to each required groove configuration. A prefix letter is used to indicate the specific installation tool for which the die has been designed, as shown below. Installation Tool Corresponding Die Set DIE IDENTIFICATION NUMBERING SYSTEM U 34 ART A - Y34A B - Y34BH C - Y48B 12 - # #10 8C - # 8 6C - # 6 5C - # 5 USE CHART (CHART III) WIRE SIZE (CHART II) OR INDEX TOOL TYPE (CHART I) 4C - #4 3C - #3 2C - #2 1C - #1 25-1/0 E - Y44B F - Y486RB G - Y34C L - Y60B CHART II 26-2/0 27-3/0 28-4/ MCM MCM CHART III A - ALUMINUM B - INDENTOR NEST (USED WITH INDENTOR DIE # Y34P**) R - ROUND DIE (CIRCUMFERENTAL) T - TWIN DIE (BOTH HALVES) CHART I P - Y46 S - Y45 U - Y35 W - MD-6/OUR MCM MCM MCM MCM MCM MCM X - OUR840/MD-6 OR INDEX i.e., U Die Index Canada: BURNDY LLC US:

94 BURNDY Renewable ProductsWind Installation Data COLOR CODING FOR AL/CU CONNECTORS COLOR CODE STR COLOR CODE STR BLUE 8 BLUE 300 GRAY 6 BROWN 350 GREEN 4 GREEN 400 PINK 2 PINK 500 GOLD 1 BLACK 600 TAN 1/0 YELLOW 700/750 OLIVE 2/0 RED 700/750 RUBY 3/0 BROWN 1000 WHITE 4/0 BLUE 1500 RED 250 RED 2000 NOTE: This chart is only intended as a guide. For spe- COLOR CODING FOR COPPER LUGS AND SPLICES COLOR CODE STR CODE SIZE SOL FLEX CABLE RED BLUE 6 6 BLUE 5 GRAY 4 4 WHITE 3 2 BROWN 2 2 GREEN 1 1 PINK 1/0 1/0 BLACK 2/0 2/0 ORANGE 3/0 3/0 PURPLE 4/0 4/0 YELLOW 250 4/0 & 250 WHITE RED BLUE BROWN GREEN 600 PINK PURPLE 600 BLACK YELLOW ORANGE 800 WHITE 1000 YELLOW 1111 GREEN 1500 BROWN 2000 NOTE: This chart is only intended as a guide. For specific applications refer to your catalog. US: BURNDY LLC Canada:

95 Installation Data BURNDY Renewable ProductsWind INCHES & MILLIMETERS CONVERSION CHART INCHES MM INCHES MM MM INCHES MM INCHES mm = =.0254 mm Canada: BURNDY LLC US:

96 BURNDY Renewable ProductsWind Installation Data US: BURNDY LLC Canada: AWG VS. METRIC WIRE SIZES CIRC. MILS EQUIV- ALENT CIRC. MILS METRIC WIRE SIZE MM AWG. SIZE STRANDING/WIRE DIAMETER PER STRAND APPROXIMATE OVERALL DIAMETER IN. MM IN. MM CIRC. MILS EQUIV- ALENT CIRC. MILS METRIC WIRE SIZE MM AWG. SIZE STRANDING/WIRE DIAMETER PER STRAND APPROXIMATE OVERALL DIAMETER IN. MM IN. MM /.032 7/ /.039 1/ / /.045 7/.017 1/.813 1/.307 1/.091 1/1.02 7/.386 1/1.14 7/ /0 2/0 3/0 3/ / / / / / / / / / / / / / / / / /.055 7/.021 1/ / /1.29 7/.468 1/1.40 7/5.33 1/1.63 7/ / / / / / / / / / / / / / /.071 7/.027 1/ / /.089 7/.034 1/1.80 7/6.66 1/2.05 7/.775 1/2.26 7/ / / /104 37/ / / / / / / / / / / /.109 7/.042 1/ / /2.59 7/.978 1/2.77 7/.107 1/2.91 7/ / / / / / / / / / / / / / / /.141 7/.054 1/ / /3.26 7/1.23 1/3.58 7/1.37 1/3.67 7/ / / / / / / / / / / / / /.162 7/ /.008 7/ / /4.11 7/1.55 7/1.73 7/1.75 7/ / / / / / / / / / / / /.052 7/ / / /.001 7/ /1.32 7/2.20 7/2.47 7/ / kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 500 kcmil 600 kcmil 700 kcmil 750 kcmil 750 kcmil 800 kcmil 800 kcmil 1000 kcmil 1000 kcmil 1250 kcmil 1250 kcmil 1500 kcmil 1500 kcmil 2000 kcmil 2000 kcmil 91/ / / / / / Metric Bolt Equivalent Unified Inch Metric Hole Size Equivalent 1/4 M6 5/16 M8 3/8 M10 1/2 M12 5/8 M16 METRIC BOLT EQUIVALENT CHART

97 Installation Data BURNDY Renewable ProductsWind Canada: BURNDY LLC US: CABLE DATA FLEXIBLE COPPER STRANDED CABLE CONDUCTOR SIZE KCMIL OR B & S G (AWG) STRANDING AND DIAMETER NOMINAL DIAMETER CLASS / / / / / I G H K M / / / / / G I H K M / / / / / G I H K M / / / / / G I H K M / / / / / G I H K M / / / / / G H I K M / / / / / G H I K M / / / / / G I H K M 1/0 1/0 1/0 1/0 1/0 133/ / / / / G H I K M 2/0 2/0 2/0 2/0 2/0 133/ / / / / G H I K M 3/0 3/0 3/0 3/0 3/0 133/ / / / / G H I K M 4/0 4/0 4/0 4/0 4/0 133/ / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M / / / / / G H I K M CONDUCTOR SIZE KCMIL OR B & S G (AWG) STRANDING AND DIAMETER NOMINAL DIAMETER CLASS

98 BURNDY Renewable ProductsWind Index Alpha-Numeric CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO SW BOX 29 B B B Cl 54 44C HEN BOX 29 B B B R 54 44x150 HEB BOX 28 B B B3D x200 HEB BOX 28 B B B3D12N B B B3E R 54 45CI 54 B B B3E12N 52 15CI 54 45CP 54 B B B3F CP 54 45R 54 B B B3F12N 52 15R FW BOX 29 B B B3G NW BOX 29 B B B3G12N R SW BOX 29 B B B B B B FW BOX R 54 B B B4D NW BOX 29 50C HEN BOX 29 B B B4D12N SW BOX 29 50x100 HEB BOX 28 B B B4E x125 HEB BOX 28 B B B4E12N R 54 50x150 HEB BOX 28 B B B4F C HEN BOX 29 50x175 HEB BOX 28 B B B4F12N 52 25CI 54 50x200 HEB BOX 28 B B B4G12N 52 25CP 54 50x225 HEB BOX 28 B B BAT18V 66, 67, 70, 72 25R 54 50x250 HEB BOX 28 B B BATCHGR18V 72 25x100 HEB BOX 28 50x275 HEB BOX 28 B B BB077L 49 25x125 HEB BOX 28 50x300 HEB BOX 28 B B BB154L 49 25x150 HEB BOX 28 50x325 HEB BOX 28 B B BB226L 49 25x200 HEB BOX 28 50x350 HEB BOX 28 B B BB300L 49 25x250 HEB BOX 28 50x375 HEB BOX 28 B B BCT/PATDCCHGR 25x300 HEB BOX 28 50x400 HEB BOX 28 B B , 67, 70, 72 25x50 HEB BOX 28 50x450 HEB BOX 28 B B BD x62 HEB BOX 28 50x500 HEB BOX 28 B B BD12N 51 25x75 HEB BOX 28 50x550 HEB BOX 28 B B BD FW BOX 29 50x600 HEB BOX 28 B B BD18N NW BOX 29 50x75 HEB BOX 28 B B BD SW BOX FW BOX 29 B B BD24N 51 31C HEN BOX NW BOX 29 B B BDB x100 HEB BOX SW BOX 29 B B BDB x125 HEB BOX 28 62C HEN BOX 29 B B BDB-16-2/ x150 HEB BOX 28 62x100 HEB BOX 28 B B BDB x175 HEB BOX 28 62x125 HEB BOX 28 B B BDB x200 HEB BOX 28 62x150 HEB BOX 28 B B BDB x250 HEB BOX 28 62x175 HEB BOX 28 B B BDB x300 HEB BOX 28 62x200 HEB BOX 28 B B BDB x50 HEB BOX 28 62x225 HEB BOX 28 B B BDB-26-2/ x62 HEB BOX 28 62x250 HEB BOX 28 B B BDB x75 HEB BOX 28 62x275 HEB BOX 28 B B BDB x300 HEB BOX 28 B B BE CI 54 62x325 HEB BOX 28 B B BE12N 51 32CP 54 62x350 HEB BOX 28 B B BE R 54 62x400 HEB BOX 28 B B BE18N FW BOX 29 62x450 HEB BOX 28 B B BE NW BOX 29 62x500 HEB BOX 28 B B BE24N SW BOX 29 62x600 HEB BOX 28 B B BF C HEN BOX B B BF12N 51 38x100 HEB BOX 28 65CI 54 B B BF x125 HEB BOX 28 65CP 54 B B BF18N 51 38x150 HEB BOX 28 65R 54 B B BF x175 HEB BOX B B BF24N 51 38x200 HEB BOX 28 90CI 54 B B BG x225 HEB BOX 28 90R 54 B B BG12N 51 38x250 HEB BOX 28 ALFLUID GAL. 75 B B BG x275 HEB BOX 28 ALFLUID QT. 75 B B BG18N 51 38x300 HEB BOX 28 B B B2D12 52 BG x325 HEB BOX 28 B B B2D12N 52 BG24N 51 38x350 HEB BOX 28 B B B2E12 52 BISR1/ x400 HEB BOX 28 B B B2E12N 52 BISR x450 HEB BOX 28 B B B2F12 52 BISR x50 HEB BOX 28 B B B2F12N 52 BISR x500 HEB BOX 28 B B B2G12N 52 BISR x62 HEB BOX 28 B B B BIT2/ x75 HEB BOX 28 B B B BIT x88 HEB BOX 28 B B B BIT FW BOX 29 B B B BIT NW BOX 29 B B B BIT US: BURNDY LLC Canada:

99 Index Alpha-Numeric BURNDY Renewable ProductsWind CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. BIT GAR HSC18FR 33 PATHCC10SOL-18V 66 U39RT 25 BITO2/0 63 GAR154C 47 HSC18FR PEN A-4 27 U3CRT 25 BITO GAR HSC200FR 33 PEN A U44XRT 25 BITO GAR HSC200FR PEN A U4CABT 25 BITO4 63 GAR HSC34FR 33 PEN E-4 27 U4CRT 25 BITO GAR164C 47 HSC34FR PEN E-8 27 U5CRT 25 BITO GAR HSC38FR 33 PENA 1/2 27 U6CABT 25 BSC2H 76 GAR HSC38FR PENHT-4 27 U8CABT 25 BSC2H3A2B 76 GAR HSIC10-500FR 32 PENHT-8 27 U8CRT 25 BSC2H5A 76 GAR174C 47 HSIC200FR 32 PT UH BSC2H5B 76 GAR HSIC269FR 32 PT UH CT18075C 34 GAR HSIC FR 32 PT UH CT18075C0 34 GAR HSIC350FR 32 PT W CT18075M 34 GAR184C 47 HSIC4-40FR 32 PT W CT18075M0 34 GAR HSIC8-1FR 32 PT W CT18125C 34 GAR K2C 46 PT W CT18125C0 34 GAR KA25U 61 PT W1CVT 25 CT18125M 34 GAR194C 47 KA26U 61 PT W CT18125M0 34 GAR KA29U 61 PT W CT18200C 34 GAR KA2U 61 PT W CT18200C0 34 GAR KA30U 61 PT W25VT 25 CT18200M 34 GAR204C 48 KA31U 61 PT W26VT 25 CT18200M0 34 GAR KA34U 61 PT W27VT 25 CT30125C 34 GAR KA36U 61 PT W28VT 25 CT30125C0 34 GAR KA36U-2N 61 PT , 70 W29VT 25 CT30125M 34 GAR214C 48 KA40U 61 PT W2CVT 25 CT30125M0 34 GAR KA40U-2N 61 PT , 69 W30VT 25 CT40200C 34 GAR KA44U 61 PT W31ART 25 CT40200C0 34 GAR KA44U-2N 61 PT W31VT 25 CT40200M 34 GAR224C 48 KA6U 61 PUADP-1 71, 72 W32VT 25 CT40200M0 34 GAR KC 46 R17A 76 W34VT 25 CT40300C 34 GAR KC22J12T13 46 R22B 76 W36RT 25 CT40300C0 34 GAR KC26 46 RHCC129ACSR 65 W3CRT 25 CT40300M 34 GAR244C 48 KC34J12T13 46 RHCCHSA 65 W4CVT 25 CT40300M0 34 GAR KKA31U-2N 61 SWA18A-34N 81 W5CVT 25 CT40400C 34 GAR KPA25 60 SWA22A-44N 81 W CT40400C0 34 GAR KPA28 60 SWA58A-34N 81 W8CVT 25 CT40400M 34 GAR644C 47 KPA34 60 SWA86A-44N 81 WIREMIKE 69 CT40400M0 34 GAR KPA4C 60 SWA92A-44N 81 X8CART 25 CT50175C 34 GSTUD14HY 45 KPA8C 60 SWA96A-44N 81 Y10AC9 73 CT50175C0 34 GSTUD34HY 45 KS15 60 SWHRH18A-3CH 82 Y10AC9OEM 73 CT50175M 34 GSTUD38HY 45 KS17 60 SWHRH18A-5CH 82 Y1MRKIT 68 CT50175M0 34 GSTUD916HY 45 KS20 60 SWHRH22A-3CH 82 Y1MRTC 68 CT50300C 34 HCCACSR 66 KS22 60 SWHRH22A-5CH 82 Y1MRTCKIT 68 CT50300C0 34 HCCCUAL 66 KS23 60 SWHRH86A-3CH 82 Y46 71 CT50300M 34 HCCGUY 66 KS25 60 SWHRH86A-5CH 82 Y CT50300M0 34 HCCGUYRPLBLDS 66 KS26 60 U1CART 25 Y46C 71 CT50400C 34 HCCSOL 66 KS27 60 U1CRT-1 25 Y750BHXT 69 CT50400C0 34 HCCSOLRPLBLDS 66 KS29 60 U25ART 25 Y750CBHXT 69 CT50400M 34 HSB110H48PF5 31 KS31 60 U25RT 25 YA15ALKIT 6 CT50400M0 34 HSB110H6PF5 31 KS34 60 U26ART 25 YA1CL-BOX 10 EBP 76 HSB110H9PF5 31 MTB 76 U26RT 25 YA1CL2NT14E2 13 EPAC-6 74 HSB150H12PF3 31 MTX 76 U27ART 25 YA25 12 EPAC-8 74 HSB150H48PF5 31 NAH34-2N 78 U27RT 25 YA252NU 5 EPAC10 74 HSB150H9PF3 31 NAH34-34N 78 U28ART 25 YA25A1S60T516E 19 EPAC HSB200H12PF2 31 NAH40-2N 78 U28RT 25 YA25A3N69T38E 19 EQC632C 46 HSB200H48PF2 31 NAH44-34N 78 U29ART 25 YA25A7 23 FD655C6 83 HSB200H9PF2 31 NHNT U29RT 25 YA25L-BOX 10 FD655D6 83 HSB34H48PF5 31 NHNT U2CABT 25 YA25L2NT14E1 13 FD66D6 83 HSB34H6PF10 31 P15K 71, 72 U2CRT 25 YA25LN50T14E 19 FD67C6 83 HSB34H9PF10 31 P8A 27 U30ART 25 YA25LN64T516E 19 FD67D8 83 HSB35H3PF25 31 PAT46-18V 72 U30RT 25 YA25LNT FD68D8 83 HSB35H48PF5 31 PAT46C-18V 72 U31ART 25 YA26 12 GAR HSB35H6PF25 31 PAT750XT-18V 70 U31RT 25 YA262NU 5 GAR HSC100FR 33 PATCHGR18V 66, 67, 70 U32ART 25 YA26A3 23 GAR114C 47 HSC100FR PATCHGR250V 66, 67, 70, 72 U32RT 25 YA26L-BOX 10 GAR HSC112FR 33 PATCUT245CUAL-18V 67 U34ART 25 YA26L2NT14 13 GAR HSC112FR PATHCC10 66 U34RT 25 YA26LN50T14E 19 GAR HSC12FR 33 PATHCC10-18V 66 U36ART 25 YA26LNT GAR144C 47 HSC12FR PATHCC10ACSR-18V 66 U36RT 25 YA27 12 GAR HSC14FR 33 PATHCC10CUAL-18V 66 U38XRT 25 YA272NU 5 GAR HSC14FR PATHCC10GUY-18V 66 U39ART-2 25 YA27A10S76T516E 19 Canada: BURNDY LLC US:

100 BURNDY Renewable ProductsWind Index Alpha-Numeric CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. CATALOG NO. PAGE NO. YA27A5 23 YA34L-TC12-FX 8 YAV14T3 20 YAZV28TC12FX 9 YGHR26C58 42 YA27L-BOX 10 YA34L6N131T12E 19 YAV16M10 20 YBA15ALKIT 6 YGHR29C YA27LNT38 11 YA34LNT38 11 YAV16M12 20 YBA25A 4 YGHR29C12 42 YA28 12 YA36 12 YAV16M6 20 YBA26A 4 YGHR29C34 42 YA282NU 5 YA36-L2NTC-FX 16 YAV16M8 20 YBA27A 4 YGHR29C58 42 YA28A5 23 YA362N 14 YAV18 20 YBA28A 4 YGHR34C YA28L-BOX 10 YA36A1 22 YAV18T1 20 YBA29 2 YGHR34C34 42 YA28LNT38 11 YA36A3 23 YAV18T4 20 YBA29A 4 YGHR34C58 42 YA29 12 YA36A3N131TD12E 19 YAV18T5 20 YBA30A 4 YGHS25 43 YA29-2N 6 YA36A9N131TD12E 19 YAV1CL-TC12-FX 7 YBA31A 4 YGHS26 43 YA292N 14 YA36L-TC12-FX 8 YAV25-L2NTC-FX 16 YBA31FX 2 YGHS27 43 YA292NU 5 YA36LNT38 11 YAV252N-FXB 18 YBA32A 4 YGHS28 43 YA29A1 22 YA38-L2NTC-FX 16 YAV25L-TC12-FX 7 YBA32FX 2 YGHS29 43 YA29A3 23 YA38-L2TC12-FX 16 YAV25M10 20 YBA34A 4 YGHS2C 43 YA29L-BOX 10 YA382N 14 YAV25M12 20 YBA34FX 2 YGHS31 43 YA29LNT38 11 YA382N-FXB 18 YAV25M6 20 YBA36A 4 YGHS34 43 YA2CA1S91T516E 19 YA38L-TC12-FX 8 YAV25M8 20 YBA36FX 3 YGL29C2 37 YA2CL2NT14 13 YA39 12 YAV26-L2NTC-FX 16 YBA36FX58 3 YGL29C29 37 YA2CLNT14 11 YA392N 14 YAV262N-FXB 18 YBA38FX 3 YGL2C2 37 YA30 12 YA392NU 5 YAV26L-TC12-FX 7 YBA39 3 YGL34C2 37 YA30-L2NTC-FX 16 YA39A1 22 YAV27-L2TC38-FX 16 YBA39A 4 YGL34C29 37 YA302N-FXB 18 YA39A1N131TD12E 19 YAV272N-FXB 18 YBA44A 4, 6 YGL34C34 37 YA30A1 22 YA39A3 22 YAV27L-TC12-FX 7 YBA44FX 3, 6 YGLR29C YA30A1N131T12E 19 YA39A5 23 YAV28-L2NTC-FX 16 YBA44FX58 3 YGLR29C12 38 YA30A3 23 YA39A5N131TD12E 19 YAV282TC38-FXB 18 YBAFX15CLKIT 6 YGLR29C34 38 YA30A6N100T38E 19 YA39AM2 23 YAV28L-TC14-FX 7 YBAV25FX14 2 YGLR29C58 38 YA30A9N100T516E 19 YA39L2NT38 13 YAV29-L2NTC-FX 16 YBAV26FX14 2 YGLR34C YA30L 10 YA39L6N131T12E 19 YAV292N-FXB 18 YBAV27FX14 2 YGLR34C12 38 YA30L-TC12-FX 8 YA40-L2NNT-FX 16 YAV29L-TC12-FX 8 YBAV28FX 2 YGLR34C34 38 YA30L24N100T38E 19 YA402N 14 YAV2CL-TC12-FX 7 YC10L12 68 YGLR34C58 38 YA31 12 YA402N-FXB 18 YAV4CL-TC12-FX 7 YC4L12 68 YS1C 21 YA31-L2TC38-FX 16 YA44 12 YAV6CL-TC34-FX 7 YC6L12 68 YS25 21 YA312N 14 YA44-L2NNT-FX 16 YAZ29-2N 15 YC8L12 68 YS26 21 YA312N-FXB 18 YA44-L2NT38-FX 16 YAZ302TC38FX 17 YGF29-2N 44 YS27 21 YA312NU 5 YA44-L2NTC-FX 16 YAZ30TC38FX 9 YGF29-4N 44 YS28 21 YA31A1 22 YA44-L2TC38-FX 16 YAZ31-2N 15 YGF34-2N 44 YS29 21 YA31A11N100T516E 19 YA442N 14 YAZ312TC14E2FX 17 YGF34-4N 44 YS29A1 24 YA31A3 23 YA442N-FXB 18 YAZ31TC38FX 9 YGHA25-2N 43 YS2C 21 YA31A9N100T38E 19 YA442NU 5 YAZ32TC38FX 9 YGHA26-2N 43 YS30 21 YA31L 10 YA44A1 22 YAZ34-2N 15 YGHA27-2N 43 YS30A1 24 YA31L-TC12-FX 8 YA44A3 6, 23 YAZ342NTCFX 17 YGHA28-2N 43 YS31 21 YA31L2NT38 13 YA44L-TC12-FX 8 YAZ34TC12FX 9 YGHA29-2N 43 YS31A1 24 YA31LNT38 11 YA45A5 23 YAZ36-2N 15 YGHA2C-2N 43 YS32 21 YA32 12 YA462N-FXB 18 YAZ362TC38FX 17 YGHA31-2N 43 YS32A1 24 YA322N 14 YA46A3 23 YAZ36TC38FX 9 YGHA34-2N 43 YS34 21 YA322N-FXB 18 YA46A5 23 YAZ382NNTFX 17 YGHC26C2 39 YS34A1 24 YA32A8N106T516E 19 YA8CA3S56T14E 19 YAZ382NTCFX 17 YGHC26C26 39 YS36 21 YA32L 10 YAC-CASE 73 YAZ38NT12FX 9 YGHC29C26 39 YS36A1 24 YA32L-TC12-FX 8 YAFX15CLKIT 6 YAZ39-2N 15 YGHC29C29 39 YS39 21 YA34 12 YAV025M6 20 YAZ40-2N 15 YGHC2C2 39 YS39A1 24 YA34-L2NTC-FX 16 YAV04M6 20 YAZ402NTCFX 17 YGHC34C26 39 YS44 21 YA342LNN119T12E 19 YAV06FM6 20 YAZ44-2N 15 YGHC34C29 39 YS44A1 24 YA342LNN131T12E 19 YAV06M35 20 YAZ442NNTFX 6, 17 YGHC34C34 39 YS45A1 24 YA342N 14 YAV06M4 20 YAZ442NT38FX 17 YGHP29C2 40 YS46 21 YA342N-FXB 18 YAV06M5 20 YAZ442NTCFX 17 YGHP29C26 40 YS46A1 24 YA342NU 5 YAV06M6 20 YAZV252NTCFX 17 YGHP29C29 40 YS4C 21 YA34A1 22 YAV06M8 20 YAZV25TC12FX 9 YGHP34C26 40 YSHG YA34A3 23 YAV10M10 20 YAZV262NTCFX 17 YGHP34C29 40 YSHG YA34A3N131T12E 19 YAV10M12 20 YAZV26TC12FX 9 YGHP34C34 40 YSHG YA34A7N131T12E 19 YAV10M6 20 YAZV272TC14E2FX 17 YGHR26C YSHG YA34A8N131T38E 19 YAV10M8 20 YAZV27TC38FX 9 YGHR26C12 42 YA34L 10 YAV10T38 20 YAZV282NTCFX 17 YGHR26C34 42 US: BURNDY LLC Canada:

101 Down Tower Terminations BURNDY offers a wide range of one- and two-hole aluminum and copper narrow tongue terminals. Narrow tongue terminals are designed to be installed in applications that have specific size constraints. Collector System Terminations Professionals choose BURNDY products for their overall quality and versatility as well as their superior performance in the most challenging environments. Tower and Transformer Grounding Tower and Transformer Grounding BURNDY is The HYGROUND irreversible compression grounding system is a safe, cost-effective and time-efficient grounding method. It employs well-proven design principles and technologies that have been in existence for over 60 years and are only manufactured by BURNDY. BURNDY Engineered System Coordinating Dies, Connectors and Tools these three elements are specifically designed to work together and engineered to meet stringent, accepted quality standards. This allows the user complete confidence in the integrity of the connection.

102 Customer Service Department 7 Aviation Park Drive Londonderry, NH (International) Canada (Quebec) (All other provinces) Mexico Brazil Tool Repair Center Littleton Industrial Park Littleton, NH TM Experience.Technology. Answers BURNDY LLC. All Rights Reserved.