Emergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting units LED

Transcription

1 powered powered BASIC 15 W CE lighting units ED roduct description Controlgear for ED for mains operation with integrated simple CRRIDR FUCTI () and emergency lighting funtion for manual testing For luminaire installation For the use with STARK CE 1500 roperties Constant current ED converter with 470 ma output current Simple CRRIDR FUCTI () with 10 % light level Integrated 1 W emergency lighting unit for nonmaintained operation 3 h rated duration Constant current mode Green charge status display ED Electronic charge system olarity reversal protection for battery Deep discharge protection Shortcircuitproof battery connection SEV lighting EDs available ED module and sensor available Batteries Hightemperature cells imh / icd batteries Cs cells Blade terminals for simple connection 66,5 79 Technical data Rated supply voltage V Mains frequency 50 / 60 Hz Mains power in normal operation 18 W Mains power in operation 3 W Mains current in normal operation 0.1 A Mains current in operation 0.03 A Typ. λ (at 230 V 50 Hz, normal operation) 0.8 Typ. λ (at 230 V 50 Hz, operation) 0.5 Typ. efficiency (at 230 V 50 Hz, normal operation) 82 % Typ. efficiency (bei 230 V 50 Hz, operation) 49 % eakage current (E) 0 vervoltage protection 320 V (for 1 h) charging time 24 h charge current 120 ma discharge current see page 3 umber of cells 3 Max. permitted forward voltage ED 33 V Max. permitted forward voltage emergency ED V Turn on time (at 230 V, 50 Hz, full load) 100 ms Ambient temperature ta C Max. casing temperature tc 75 C Dimensions xbxh 123 x 79 x 31 mm Mains voltage changeover threshold according to E Type of protection I20 rdering data Type Article number ackaging, carton ackaging, pallet Weight per piece powered 15W BASIC CE imh pieces 700 pieces 0.13 kg powered 15W BASIC CE icd pieces 700 pieces 0.13 kg Data sheet 09/

2 powered Specific technical data Type Typ. output current utput current tolerance utput voltage range Max. output voltage Typ. output power ormal operation powered 15W BASIC CE imh 470 ma 5 % V 33 V W powered 15W BASIC CE icd 470 ma 5 % V 33 V W operation powered 15W BASIC CE imh 43 ma 15 % V 33 V 1.12 W powered 15W BASIC CE icd 43 ma 15 % V 33 V 1.12 W operation powered 15W BASIC CE imh 400 ma 5 % V 3.4 V W powered 15W BASIC CE icd 320 ma 5 % V 3.4 V W 1 The use of the emergency ED with a higher forward voltage then 3.4 V reduces the operating time. ACCES SRIES Status indication green ED roduct description A green ED indicates that charging current is flowing into the battery rdering data Type Article number ackaging, bag ackaging, carton Weight per pcs. ED green pieces 200 pieces kg ED green, ultra high brightness pieces 200 pieces kg Data sheet 09/

3 powered Standards E E E E E E E according to E according to E E Further technical data discharge current Max. ED forward voltage (3,40 V) 15 W CE imh 500 ma 15 W CE icd 375 ma Technical data battery Case temperature range to ensure 4 years design life 0 C to 55 C voltage 1.2 V per cell Capacity Cs 2.0 Ah imh 1.6 Ah icd Mechanichal details Case manufactured from polycarbonate. Glowwire test according to E C and 850 C passed ED status indicator Green Mounting hole 6.5 mm dia ead length 1,000 mm leads Quantity: 1 red and 1 black ength: 1,000 mm Wire type: 0.5 mm 2 solid conductor Insulation rating: 90 C end termination ush on 4.8 mm receptacle to suit battery spade fitted with insulating cover Module end termination 8.0 mm stripped insulation Storage conditions battery Batteries should be stored within the specified temperature range in low humidity conditions. ptimal storage conditions are temperature: 5 C to 25 C humidity: 65 % ±20 % Avoid atmosphere with corrosive gas It is recommended to disconnect the battery before store or delivery Avoid to store the batteries discharged A long term storage in open circuit leads to battery self discharge and deactivation of chemical components. It could be required to charge and discharge the batteries a few times to recover the initial performance.. Batteries Connection method: 4.8 x 0.5 mm spade tag welded to end of cell For stick packs this connection is accessible after the battery caps have been fitted. To inhibit inverter operation disconnect the batteries by removing the connector from the battery spade tag. For battery data see separate data sheet. Batteries Type powered 15 BASIC CE imh Art. no.: powered 15 BASIC CE icd Art. no.: Accu imh C3A Art. no.: X Accu icd C3A Art. no.: X Accuack icd 3C Art. no.: X Data sheet 09/

4 powered Shortcircuit behaviour In case of a short circuit on the secondary side (ED) the ED ouput is switched off. After elimination of the short circuit the nominal operation is restored automatically. oload operation The controlgear is not damaged in the noload operation. The max. output voltage can be obtained during noload operation. Expected lifetime Type ta = 45 C ta = 55 C powered 15W BASIC CE imh tc 65 C 75 C ifetime 100,000 h 50,000 h powered 15 W BASIC CE icd tc 65 C 75 C ifetime 100,000 h 50,000 h Storage conditions Humidity: 5 % up to max. 85 %, not condensed (max. 56 days/year at 85 %) Storage temperature: 40 C up to max. 80 C The devices have to be within the specified temperature range (ta) before they are operated. Maximum loading of automatic circuit breakers Automatic circuit breaker type B10 B13 B16 B20 Inrush current Installation Ø 1.5 mm mm mm mm 2 I max time powered 15W BASIC CE imh A 120 ms powered 15 W BASIC CE icd A 120 ms Harmonic distortion in the mains supply (at 230 V / 50 Hz and full load) in % Type THD powered 15W BASIC CE imh powered 15 W BASIC CE icd Ballast lumen factor in % BF EBF Corridor mode powered 15W BASIC CE imh powered 15 W BASIC CE icd Data sheet 09/

5 powered Wiring diagram powered with sensor Wiring diagram powered with sensor and testswitch S IR input powered 15 W BASIC CE Indication ED ED ED STARK CE Test switch S IR input powered 15 W BASIC CE Indication ED ED ED STARK CE Sensor Sensor IR input 230 V Switching behaviour S utput ED off off off off off off on off 10 % on on 100 % Wiring diagram powered Wiring diagram powered with testswitch S IR input powered 15 BASIC CE Indication ED ED ED STARK CE Test switch S IR input powered 15 BASIC CE Indication ED ED ED STARK CE IR input 230 V The mains power must be removed before changing the ED load. Secondary switching of EDs is not allowed and may cause damage to the EDs. The hot plugin of EDs during normal operation may result in current peaks of up to 50% above the typical output current. Data sheet 09/

6 powered Wiring instructions Secondary leads should be separated from the mains connections and wiring for good C performance. The powered terminals, battery and indicator ED terminals are classified as SEV. Keep the wiring of the input terminals separated from the wiring of the SEV equivalent terminals or consider special wiring (double insulation, 6 mm creepage and clearance) when these connections should be kept SEV. Maximum lead length on the powered terminals is 3 m. For a good C performance keep the ED wiring as short as possible. Maximum lead length for the indicator ED connection is 1 m. The indicator ED wiring should be separated from the powered leads to prevent noise coupling. leads are specified with 0.8 mm cross section and a length of < 1 m Switched live and unswitched live supplies must be off the same phase. IDC interface solid wire with a cross section of 0.5 mm² according to the specification from WAG Horizontal interface solid wire with a cross section of mm² according to the specification from WAG strip mm of insulation from the cables to ensure perfect operation of the terminals wire preparation: mm² mm oosen wire Installation instruction Max. torque for the mounting screws: 0.5 m / M4. You must make sure that the ED is connected with the correct polarity. EDs that are connected to powered should have polarity reversal protection such as a Schottky diode. There may be irreversible damage if the ED is connected with the wrong polarity. The protection device must be capable of handling a load of more than 700 ma. i For comprehensive instructions consult the website Data sheet 09/