Emergency lighting units EM series. EM BASIC lp-2, V BASIC version. Technical data. Ordering data. Article number

Size: px
Start display at page:

Download "Emergency lighting units EM series. EM BASIC lp-2, V BASIC version. Technical data. Ordering data. Article number"

Transcription

1 Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps ow-profile casing ( x 0 mm cross-section) Properties or h rated duration Compatible with all electronic ballasts (dimmable and non-dimmable) -pole technology: -pole lamp changeover and delayed power switching for the ballast High-frequency ac operation of the lamp Hot restart in emergency mode Gentle on the lamp thanks to permanent cathode heating in emergency mode. min. boost start for rapid heating of the lamp, more light in the startup phase and optimum lamp life Maximum ballast lumen factors (BF) for all lamps Green charge status display Electronic multi-level charge system Deep discharge protection Short-circuit-proof battery connection Polarity reversal protection for battery Batteries High-temperature cells icd or imh batteries D or Cs cells Blade terminals for simple connection TC-DE TC-SE TC-TE TC-F TC- È Standards, page Wiring diagrams and installation examples, page 9 T T TC-DD Tc EM, 0 0 V BASIC version Technical data Rated supply voltage 0 0 V Mains frequency 0 / 0 Hz Mains current 0 ma Rated power < 0 W Overvoltage protection 0 V (for h) Maximum operating voltage (U-OUT of the ECG) 0 V Battery charging time h Battery charging time / h / 0 h Discharge current. A eakage current (PE) 0. ma Ambient temperature ta C Max. casing temperature tc 0 C Mains voltage changeover threshold according to E 09-- Min. lamp starting temperature (emergency operation) - C of protection IP0 Ordering data Article number umber of Packaging, Packaging, Weight per cells carton pallet pc. Rated operating time h, Standard BF EM 9000 pc(s). pc(s). 0. kg EM 9000 pc(s). pc(s). 0.9 kg EM pc(s). pc(s). 0.9 kg Rated operating time h, Standard BF EM pc(s). pc(s). 0.9 kg EM 9000 pc(s). pc(s). 0.9 kg EM 9000 pc(s). pc(s). 0.9 kg Data sheet 0/-9-

2 Specific technical data Battery charge time Charge current Initial charge Fast charge Trickle charge Rated operating time h, Standard BF EM h 0 ma 0 ma 0 ma EM h 0 ma 0 ma 0 ma EM h 0 ma 0 ma 0 ma Rated operating time h, Standard BF EM 0 h 0 ma 0 ma 0 ma EM 0 h 0 ma 0 ma 0 ma EM 0 h 0 ma 0 ma 0 ma Data sheet 0/-9-

3 Product description For connection to the emergency lighting unit For checking the device function Product description A green indicates that charging current is flowing into the battery ACCESSO- RIES ACCESSO- RIES switch EM Ordering data Article number Packaging, bag Packaging, carton Weight per pc. switch EM 90 pc(s). 00 pc(s). 0.0 kg Status indication green Ordering data Article number Packaging, bag Packaging, carton Weight per pc. EM green 9990 pc(s). 00 pc(s). 0.0 kg EM green, ultra high brightness 999 pc(s). 00 pc(s). 0.0 kg Data sheet 0/-9-

4 Technology and capacity icd Ah D-cells imh Ah Cs-cells imh Ah Cs-cells Design umber of cells Ballast umen Factor (BF) in % EM for linear lamps, or h Duration h Standard h Cells cells cells cells cells cells cells EM EM EM EM EM EM Article no amp type Wattage BF in emergency lighting mode in % for rated operating time T W 9 9 W 0 0 W T FH W W W W T FQ W.. 9 W.. 9 W.. W.. 0 W.. T W W 0 W W W W.. 0 W.. Article number Stick Accu-iCd A Side by side Accu-iCd B 999 Stick Stick Accu-iCd C 999 Stick Accu-iCd A 999 Stick Stick Accu-iCd C Stick Stick Accu-iCd C 999 Assignable batteries Stick Accu-iMH C A Stick Accu-iMH C A 9990 Stick Accu-iMH C A 9990 Stick Stick Accu-iMH C C 9990 Stick Accu-iMH Ah C A 9990 Stick Accu-iMH Ah C A 999 Stick Accu-iMH Ah C A 999 Stick Stick Accu-iMH Ah C C 999 ote: 0 C batteries also available (see seperate datasheet at Maximum battery housing temperature 0 C. Data sheet 0/-9-

5 Technology and capacity icd Ah D-cells imh Ah Cs-cells imh Ah Cs-cells Design umber of cells Ballast umen Factor (BF) in % EM for compact lamps, or h Duration h Standard h Cells cells cells cells cells cells cells EM EM EM EM EM EM Article no amp type Wattage BF in emergency lighting mode in % for rated operating time TC-DD 0 W W W W W.. W.. TC-SE W 9 W W TC-DE 0 W 0 0 W W W.. TC-TE W W. / / 0. (GE). / / 0. (GE) W. / 0. / /. / 0. / / W /. /.0 /. /.0 W. /.. /. W. /.. /. Tc W.. 0 W.. W.. TC-F W W W TC- W W W 0 W.. W.. Article number Assignable batteries Stick Accu-iCd A Side by side Accu-iCd B 999 Stick Stick Accu-iCd C 999 Stick Accu-iCd A 999 Stick Stick Accu-iCd C Stick Stick Accu-iCd C 999 Stick Accu-iMH C A Stick Accu-iMH C A 9990 Stick Accu-iMH C A 9990 Stick Stick Accu-iMH C C 9990 Stick Accu-iMH Ah C A 9990 Stick Accu-iMH Ah C A 999 Stick Accu-iMH Ah C A 999 Stick Stick Accu-iMH Ah C C 999 ote: 0 C batteries also available (see seperate datasheet at Maximum battery housing temperature 0 C. The first figure is related to non-amalgam lamps, the second figure is realted to amalgam lamps (e.g. / 9,). For best performance of W and W TC lamps, and especially amalgam filled lamps, we recommend the use of EM resp. EM. Data sheet 0/-9-

6 Emergency Ballast umen Factor (EBF) in % EM for linear lamps, or h Duration h Standard h Cells cells cells cells cells cells cells EM EM EM EM EM EM Article no amp type Wattage EBF in emergency lighting mode in % for rated operating time T W W W T FH W W W W T FQ W.. 9 W.. 9 W.. W.. 0 W.. T W.. W.. 0 W W W W.. 0 W.. TC-DD 0 W 9 9 W.. W W.. W.. W.. TC-SE W. 9 W. W. TC-DE 0 W.. W W.. W TC-TE W W / 0. / / 0. / W 0. /.9 / 9. /. 0. /.9 / 9. /. W. /. /.. /. /. W. /.. /. W.0 /..0 /. Tc W.. 0 W W.. TC-F W.. W W TC- W W.. W W.. W.. According to E --: 00 The first figure is related to non-amalgam lamps, the second figure is realted to amalgam lamps (e.g. / 9,). For best performance of W and W TC lamps, and especially amalgam filled lamps, we recommend the use of EM resp. EM. Data sheet 0/-9-

7 Standards according to E 0 according to E 09-- E -- E 099 E 0 E E E E 00-- E E Isolation and electric strength testing of luminaires Electronic devices can be damaged by high voltage. This has to be considered during the routine testing of the luminaires in production. According to IEC 09- Annex Q (informative only!) or EEC 0-Annex A, each luminaire should be submitted to an isolation test with 00 VDC for second. This test voltage should be connected between the interconnected phase and neutral terminals and the earth terminal. The isolation resistance must be at least MΩ. As an alternative, IEC 09- Annex Q describes a test of the electrical strength with,00 VAC (or, x,00 VDC). To avoid damage to the electronic devices this test must not be conducted. Accu-iCd Case temperature range 0 C to C to ensure years design life Battery voltage/cell. V Capacity D. /. Ah Max. short term temperature (reduced lifetime) 0 C Packing quantity pcs. per carton Accu-iMh Case temperature range to ensure years design life.0 Ah Cs 0 C to C.0 Ah Cs 0 C to 0 C Battery voltage. V Capacity Cs.0 Ah.0 Ah Max. short term temperature (reduced lifetime) 0 C Packing quantity pcs. per carton Ballast compatibility The EM emergency units use pole technology and are compatible with most high frequency ballasts on the market, however it is important to check that the U-OUT rating of the ballast does not exceed the value specified under Technical data. Service life Average service life 0,000 hours under rated conditions with a failure rate of less than 0 %. Average failure rate of 0. % per 000 operating hours. ote Basic insulation between supply and battery circuit. Mechanical details Channel manufactured from galvanised steel. Cover manufactured from white pre-coated steel. status indicator Green Mounting hole. mm dia ead length 0 mm Insulation rating: 90 C switch Mounting hole.0 mm dia ead length 0 mm Battery leads Quantity: red and black ength: 00 mm Wire type: 0. mm solid conductor Insulation rating: 90 C Battery end termination Push on. mm receptacle to suit battery spade fitted with insulating cover Module end termination.0 mm stripped insulation Two-piece batteries are supplied with a 00 mm lead with. mm receptacle at each end and insulting covers to connect the separate sticks together. Electrical connections An earthed starting aid is recommended. The module should be earthed by the fixings used to attach it to the luminaire. Wiring amp/ballast/supply wire preparation: mm² 9 mm oosen wire through twisting and pulling IDC interface solid wire with a cross section of 0. mm² according to the specification from WAGO Horizontal interface solid wire with a cross section of 0.0. mm² according to the specification from WAGO solid wire with a cross section of.0 mm² with an insulation diameter up to. mm strip 9 mm of insulation from the cables loosen wire through twisting and pulling Data sheet 0/-9-

8 Batteries// switch push terminal with button release: 0. mm². mm strip Maximum lamp lead capacitance terminals and (* hot leads) 00 pf ) terminals and 00 pf ) ) ote: care should be taken not to exceed the total maximum lamp lead capacitance for HF ballast. eads should always be kept as short as possible. Wiring guidelines To ensure that a luminaire containing high frequency emergency units complies with E 0 for radio frequency conducted interference in both normal and emergency mode it is essential to follow good practice in the wiring layout. Within the luminaire the switched and unswitched 0 Hz supply wiring must be routed as short as possible and be kept as far away as possible from the lamp leads. This means, for example, in a linear T or T luminaire the mains wiring should be routed along one side of the luminaire body, while the wires to the emergency lamp from the emergency module are routed along the other side. The high frequency emergency lamp wiring contains hot leads at pins and, which have high voltage to earth. These should be kept as short as possible and separated from other wiring to minimize coupling. They also have a restriction on capacitance to other wiring and earth of 00 pf, which must be observed to ensure good lamp starting. EM FT filter When the EM is used in a remote appli-cation, where the lamp leads and indicator leads are routed together in close proximity, it is possible to have electrical interference picked up in the indicator leads. Under certain conditions this interference can cause a lock-up of the EM BASIC lp micro-controller. To overcome this problem in such applications it is necessary to fit the filter EM FT between the indicator and the EM unit. To be effective the filter must be connected close to the EM module. For further information please contact Tridonic. Technical data: Push wire terminals 0.. mm² solid conductor Ordering data Article number Packaging, Packaging, Weight carton pallet per pcs. EM FT pieces,000 pieces 0.0 kg Circuit diagram with EM FT filter EM FT out EM... BASIC P EMERGECY MODUE Batteries Connection method:. x 0. mm spade tag welded to end of cell. For stick packs this connection is accessible after the battery caps have been fitted. To inhibit inverter operation disconnect the batteries by removing the connector from the battery spade tag. For battery data see separate data sheet. With an earth connection of the metal case of the emergency module the noise suppression can be further improved. The wiring of the earth should be kept as short as possible. Through wiring may affect the emc performance of the luminaire. With the use of the fifth pole possible compatibility problems between the products can be prevented. Depending on the luminaire wiring the radio suppres sion in the emergency mode of operation can be further improved. Capacitive loading limits of lamp leads must not be exceeded. ote the capacitance of the emergency lamp leads adds to the capacitance of the leads from the ballast to the EM module when considering ballast loading. EM FT filter 0,,, 0,,,,, Batteries Data sheet 0/-9-

9 EM... emergency module wiring diagrams ot for use with magnetic ballasts and switch start circuits ed line out to ballast e in from switch eutral eutral to ballast out Wiring diagram for single lamp high frequency ballasts ed line out to ballast e in from switch eutral eutral to ballast Wiring diagram for twin lamp high frequency ballasts with terminals o connection to be made eutral Wiring diagram for non-maintained operation orange () pink () out orange () pink () out orange () pink () EM... BASIC P EMERGECY MODUE Battery HF BAAST U-OUT max. 0 V EM... BASIC P EMERGECY MODUE Battery HF BAAST U-OUT max. 0 V EM... BASIC P EMERGECY MODUE Batteries amp ed line out to ballast e in from switch eutral eutral to ballast out orange () pink () EM... BASIC P EMERGECY MODUE Battery HF BAAST U-OUT max. 0 V Wiring diagram for twin lamp high frequency ballasts with terminals ed line out to ballast e in from switch eutral eutral to ballast out orange () pink () EM... BASIC P EMERGECY MODUE Battery HF BAAST U-OUT max. 0 V Wiring diagram for twin lamp high frequency ballasts with terminals amp amp ote: All hot leads normally marked with an * should be kept as short as possible. For comprehensive wiring diagrams and instructions consult the Tridonic website Data sheet 0/

Emergency lighting units EM Inverter

Emergency lighting units EM Inverter T, 0 0 V 0/0 Hz BASIC version Product description Emergency lighting supply unit for manual testing For T fluorescent lamps ow-profile casing ( x 0 mm cross-section) -year guarantee Properties or h rated

More information

Emergency lighting units EM series. EM PRO EZ-3, V PRO version

Emergency lighting units EM series. EM PRO EZ-3, V PRO version T T TC-DE TC-SE TC-TE TC-F TC- TC-DD Tc EM, 0 40 V PRO version Product description Emergency lighting supply unit with DAI interface and automatic test function For linear and compact fluorescent lamps

More information

Emergency lighting units EM Inverter. EM SELFTEST G2, V SELFTEST version

Emergency lighting units EM Inverter. EM SELFTEST G2, V SELFTEST version T5 T8 TC- TC-F DE TC- TC-SE TC-TE TC-DD T5c EM SEFTE, 220 240 V SEFTEST version Product description Emergency lighting supply unit with self-test function For linear and compact fluorescent lamps ow-profile

More information

Emergency lighting units EM INVERTER

Emergency lighting units EM INVERTER T T8 TC- TC-F DE TC- TC-SE TC-TE TC-DD Tc EM, 0 40 V 0/0 Hz PRO version Product description Emergency lighting supply unit with DAI interface and automatic test function For linear and compact fluorescent

More information

Emergency lighting units EM INVERTER

Emergency lighting units EM INVERTER T5 T8 TC-DEL TC-SEL TC-TEL TC-L TC-DD EM, 230 240 V 50/60 Hz version Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps Small dimensions (28

More information

Emergency lighting units EM series. EM BASIC, V BASIC version

Emergency lighting units EM series. EM BASIC, V BASIC version T T TCDE TCSE TCTE TC TCDD EM, 0 0 V version roduct description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps Small dimensions ( x mm crosssection) roperties

More information

Emergency lighting units EM converterled. EM converterled BASIC 200 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 200 V BASIC series EM converter EM converter BASIC 200 V BASIC series Product description lighting Driver for manual testing For modules with a forward voltage of 50 200 V ow profile casing (21 x 30 mm cross-section) For

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled M BASIC 1 W Emergency lighting Driver 1 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting on maintained operation SEV for output voltage < 60 V DC

More information

Emergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series BASIC 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow profile

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC icd/imh 250 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 50 250 V ow

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled M BASIC 1 W Emergency lighting Driver 1 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting on maintained operation SEV for output voltage < 60 V DC

More information

Emergency lighting units EM converterled. EM converterled BASIC 90 V BASIC series

Emergency lighting units EM converterled. EM converterled BASIC 90 V BASIC series BASIC 90 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC icd 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 54 V SEV for

More information

Emergency lighting units EM converterled. EM converterled ST 90 V SELFTEST series

Emergency lighting units EM converterled. EM converterled ST 90 V SELFTEST series ST 90 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC

More information

Emergency lighting units EM converterled. EM converterled ST 50 V SELFTEST series

Emergency lighting units EM converterled. EM converterled ST 50 V SELFTEST series ST 50 V SEFTEST series Product description lighting Driver with self-test function For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow

More information

Emergency lighting units PC COMBO

Emergency lighting units PC COMBO T5 PC, 220 240 V 50/60 Hz Linear fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For T5 fluorescent lamps Low-profile casing (21 x 30 mm cross-section)

More information

Emergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver

Emergency lighting units EM powerled. EM powerled BASIC 4W Emergency lighting LED Driver BASIC 4W Emergency lighting Driver Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60 V DC ow profile casing (21 x 30 mm

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled EM converter EM converter BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60

More information

Emergency lighting units EM converterled. EM converterled PRO 200 V PRO series

Emergency lighting units EM converterled. EM converterled PRO 200 V PRO series EM converter EM converter PRO 200 V PRO series Product description lighting Driver with DAI interface and automatic test function For self-contained emergency lighting For modules with a forward voltage

More information

Emergency lighting units PC COMBO

Emergency lighting units PC COMBO TC-DD PC CFL E COMBO, 230 240 V 50/60 Hz Compact fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For TC-DD compact fluorescent lamps For manual testing

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled BASIC MH/iFePO4 250 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 50 250 V ow profile casing (21 x 30 mm cross-section)

More information

Emergency lighting units EM converterled. EM converterled PRO 50 V PRO series

Emergency lighting units EM converterled. EM converterled PRO 50 V PRO series PRO 50 V PRO series Product description lighting Driver with DAI interface and automatic test function For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output

More information

Emergency lighting units EM converterled

Emergency lighting units EM converterled BASIC MH/iFePO4 90 V BASIC series Product description Self contained emergency lighting Driver for manual testing For modules with a forward voltage of 40 97 V SEV for output voltage < 120 V DC ow profile

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled BASIC FX 80 W Combined emergency lighting LED Driver Product description Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting LED Driver with manual

More information

EM BASIC V 50/60 Hz

EM BASIC V 50/60 Hz T, T, TCDD, TC, TCE, TCDE, TCTE linear and compact lamps 00 V 0/0 Hz RoH 0 00 Description: Emergency lighting modules with hour or hour duration. Five pole technology = pole changeover and a delayed action

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

Emergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver

Emergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver BASIC CE Emergency lighting ED Driver Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) and emergency lighting function for manual testing For selfcontained

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled BASIC FX SR 50 W Combined emergency lighting LED Driver Product description Independent fixed output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting function

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power PRO EZ-3, 1 2 W Emergency lighting units Product description emergency lighting supply unit with I interface and automatic test function Properties Mains and emergency operation I interface

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled EM power EM power PRO EZ-3, 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with I interface and automatic test function For self-contained emergency lighting

More information

Emergency lighting units EM series

Emergency lighting units EM series EM power PRO EZ-3 Emergency lighting supply units Product description emergency lighting supply unit with DALI interface and automatic test function Properties Mains and emergency operation DALI interface

More information

Emergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver

Emergency lighting units EM powerled. EM powerled BASIC CLE Emergency lighting LED Driver BASIC CE lighting ED Driver roduct description ED Driver for mains operation with integrated Simple CRRIDR FUCTI () and emergency lighting function for manual testing For luminaire installation For the

More information

Emergency lighting units LED series

Emergency lighting units LED series series EM power BASIC Emergency lighting supply units emergency lighting supply unit for manual testing Properties Mains and emergency operation Low-profile casing (21 x 30 mm cross-section) Constant current

More information

Emergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting LED Driver

Emergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting LED Driver E BASIC 15 W CE lighting ED Driver roduct description ED Driver for mains operation with integrated Simple CRRIDR FUCTI () and emergency lighting function for manual testing For luminaire installation

More information

Emergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting units LED

Emergency lighting units EM powerled. EM powerled BASIC 15 W CLE Emergency lighting units LED powered powered BASIC 15 W CE lighting units ED roduct description Controlgear for ED for mains operation with integrated simple CRRIDR FUCTI () and emergency lighting funtion for manual testing For luminaire

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled PRO EZ-3, 4 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with LI interface and automatic test function For self-contained emergency lighting SELV for output

More information

PC T8 TEC, W PC TEC

PC T8 TEC, W PC TEC T8 TC-L PC T8 TEC, 18 58 W PC TEC Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range (for

More information

FL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8

FL ballasts Electronic fixed output PC T8 TEC, W PC TEC T8 T8 TC-L PC T8 TEC, 18 58 W PC TEC T8 Product description CELMA Energy Efficiency Index A2 Nominal life time up to 30,000 h (at ta 50 C with a failure rate max. 0.3 % per 1,000 h) Large temperature range

More information

FL ballasts Electronic fixed output. PC TCL PRO, W PC PRO compact

FL ballasts Electronic fixed output. PC TCL PRO, W PC PRO compact EL T5c T8 TC-L PC TCL PRO, 36 55 W PC PRO compact Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 hours (at max. ta with a failure rate max. 0.2 % per 1,000 hours)

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled ST FX SR 45 W Combined emergency lighting LED Driver Product description Independent dimmable LED Driver Emergency lighting LED Driver with automatic selftest functionality For self-contained emergency

More information

FL ballasts Electronic fixed output PC T8 PRO, W PC PRO T8

FL ballasts Electronic fixed output PC T8 PRO, W PC PRO T8 T8 PC T8 PRO, 0 70 W PC PRO T8 Product description CELMA Energy Efficiency Index A2 Nominal life-time up to 50,000 h (at ta 50 C with a failure rate max. 0.2 % per 1,000 h) Large temperature range (for

More information

FL ballasts Electronic fixed output. PC T5 TOP lp, W PC TOP T5

FL ballasts Electronic fixed output. PC T5 TOP lp, W PC TOP T5 EL T5 TC-L PC T5 TOP lp, 1 5 W PC TOP T5 Product description CELMA Energy Efficiency Index A2 Nominal life up to 50,000 hours (at ta. 50 C with a failure rate max. 0.2 % per 1,000 hours) Large temperature

More information

FL ballasts Electronic fixed output

FL ballasts Electronic fixed output T8 PC T8 PRO lp, PC T8 PRO sl, 18 58 W PC PRO T8 Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max.

More information

PC T8 PRO, W T8 fluorescent lamps

PC T8 PRO, W T8 fluorescent lamps T8 PC T8 PRO, 18 70 W T8 fluorescent lamps Product description Average life = 50,000 hours (at max ta. with a failure rate 0.2 % per 1,000 hours) Large temperature range (for values see table) Safety shutdown

More information

FL ballasts Electronic fixed output

FL ballasts Electronic fixed output PC PRO lp, PC PRO sl, 18 58 W PC PRO Product description Highest possible CELMA Energy Efficiency Index EEI = A2 BAT 21 0 Nominal life up to 100,000 h (at ta. 50 C with a failure rate max. 0.1 % per 1,000

More information

FL ballasts Electronic fixed output. PC BASIC sl, 4 28 W PC BASIC

FL ballasts Electronic fixed output. PC BASIC sl, 4 28 W PC BASIC T8 c PC BASIC sl, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range

More information

FL ballasts Electronic fixed output PC BASIC, 4 28 W PC BASIC

FL ballasts Electronic fixed output PC BASIC, 4 28 W PC BASIC PC BASIC, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range (for

More information

Electronic ballasts for fluorescent lamps Multi-lamp ECG. PC T5 PRO-M lp, W T5, T8, compact (CFL) and T5c circular fluorescent lamps

Electronic ballasts for fluorescent lamps Multi-lamp ECG. PC T5 PRO-M lp, W T5, T8, compact (CFL) and T5c circular fluorescent lamps T5 T8 TC-F TC-L T5c PC T5 PRO-M lp, 14 80 W T5, T8, compact (CFL) and T5c circular fluorescent lamps Product description Integrated lamp detection Operation of T5 lamps of the same length Average life

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled PRO DIM C 45 W Combined emergency lighting LED Driver Product description Dimmable built-in LED Driver Emergency lighting LED Driver with DALI interface and automatic test function For self-contained emergency

More information

Electronic ballasts for fluorescent lamps Professional electronic ballast

Electronic ballasts for fluorescent lamps Professional electronic ballast HE PC TC PRO 1/2x9 70 W,,, HE,,, compact fluorescent lamps Product description Average life = 50,000 hours (at ta for 50,000 h with a failure rate 0.2 % per 1,000 hours) Large temperature range (for values

More information

FL ballasts Electronic fixed output. PC TC PRO 1/2x9 70 W PC PRO compact

FL ballasts Electronic fixed output. PC TC PRO 1/2x9 70 W PC PRO compact EL HE PC TC PRO 1/2x9 70 W PC PRO compact Product description CELMA Energy Efficiency Index A2 BAT / A2 Nominal life-time up to 100,000 h (at ta 50 C with a failure rate max. 0.2 % per 1,000 h) Large temperature

More information

LED Driver Linear / area fixed output industry. Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series

LED Driver Linear / area fixed output industry. Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series Driver LCI 100W 350mA 900mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such

More information

LED Driver Linear / area fixed output industry. Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series

LED Driver Linear / area fixed output industry. Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series Driver LCI 65W 150mA 400mA TOP INDUSTRY sl TOP series Product description Fixed output constant current built-in LED Driver, particularly suitable for industrial applications in tough enviromments such

More information

Emergency lighting units EM LED Light Engines. EM ready2apply BASIC 1 2 W EM ready2apply

Emergency lighting units EM LED Light Engines. EM ready2apply BASIC 1 2 W EM ready2apply EM readyapply BASIC W EM readyapply Product description LED emergency module suitable for direct installation in ceilings Complete set with integrated electronics, LED module, heat sink, optics and battery

More information

Emergency lighting units EM LED Light Engines

Emergency lighting units EM LED Light Engines EM readyapply SELFTEST W EM readyapply Product description LED emergency module suitable for direct installation in ceilings Complete set with integrated electronics, LED module, heat sink, optics and

More information

PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCD ECO, W Compact and T5c fluorescent lamps

PHASED OUT. Digital dimmable ballasts for fluorescent lamps ECO series. PCA TCD ECO, W Compact and T5c fluorescent lamps Product description oise-free precise control via signal or switchdim CELMA energy class A1 1) Interfaces switchdim Integrated SMART-Interface Functions Optimum filament heating in any dimmer setting Automatically

More information

EM converterled BASIC Installation and wiring instructions

EM converterled BASIC Installation and wiring instructions on-maintained emergency lighting for manual testing for ED modules with a forward voltage of 10 to 200 V for luminaire installation 3 h rated duration EM convertered BASIC Installation and wiring instructions

More information

Table of contents NLE 2 x 36 W T8, 230 V, 4 Ah, 1.5 h 4

Table of contents NLE 2 x 36 W T8, 230 V, 4 Ah, 1.5 h 4 Data sheet Integrated emergency converter for fluorescent lamps zone 2 Ex 100,000 h suitable for zone 2 hazardous areas For mains and battery supply Integrated battery management inear V inear V Emergency

More information

LED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series

LED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series Driver LC 150W 200 1050mA IND sl EXC EXCITE series Product description Constant current built-in Driver for LED, particularly suitable for industrial applications in tough environments such as cold warehouses

More information

LED Driver Linear / area fixed output

LED Driver Linear / area fixed output Driver LC 65W 4-7mA flexc lp ANCED series Product description Built-in constant current LED Driver Adjustable output current between 4 and 7 ma Max. output power 65 W Up to 94 % efficiency Nominal life-time

More information

LED Driver Compact fixed output

LED Driver Compact fixed output Driver LC 45W 500 1400mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter

More information

LED Driver Compact fixed output

LED Driver Compact fixed output Driver LC 25W 350 1050mA flexc SC EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter

More information

LED light engine / OLED LED compact. Umodule STARK CLE 360 CLASSIC EM STARK CLE

LED light engine / OLED LED compact. Umodule STARK CLE 360 CLASSIC EM STARK CLE D LED light engine / OLED Umodule STARK CLE 3 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of

More information

Emergency lighting units EM LED Light Engines. Module EM-ES 08/10/12 Mk2 EM LED linear / area

Emergency lighting units EM LED Light Engines. Module EM-ES 08/10/12 Mk2 EM LED linear / area X1 X1 DC1 DC1 D81 D82 D83 D84 D85 D86 DC2 AK AK AK D121 D101 D81 D122 D102 D123 D82 D103 D124 D83 D125 D126 D84 D127 D106 D85 D128 D107 D129 D86 D108 D1210 DC2 AK AK AK D104 D105 Emergency lighting units

More information

LED control gear Compact fixed output

LED control gear Compact fixed output Driver LCI 65 W 1400/1750 ma TEC SR TEC series Product description Independent fixed output LED Driver Constant current LED Driver Output current 1,400 or 1,750 ma Max. output power 65 W Nominal life-time

More information

LED light engine / OLED LED compact. Umodule STARK CLE CLASSIC EM STARK CLE

LED light engine / OLED LED compact. Umodule STARK CLE CLASSIC EM STARK CLE D LED light engine / OLED Umodule STARK CLE 3-4 CLASSIC EM STARK CLE Product description Ideal for ceiling-mounted and wallmounted luminaires Based on annular and compact fluorescent lamps Efficiency of

More information

OEM Emergency Portfolio. Product Guide. Emergency components for LED, fluorescent and auxiliary purpose

OEM Emergency Portfolio. Product Guide. Emergency components for LED, fluorescent and auxiliary purpose OEM Emergency Portfolio Product Guide Emergency components for LED, fluorescent and auxiliary purpose Contents Introduction to this guide 3 LED Modules 4 PHL-EL3 PHL-EL3-80 PHL-EL3-D PHL-EL3-D80 PHL-EL3-4

More information

PHASED OUT. LED light engine / OLED LED compact. Module CLE G2 190mm 1500lm ADV EM Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module CLE G2 190mm 1500lm ADV EM Modules CLE Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency function and SWITCH sensor Based on

More information

LED light engine / OLED LED compact

LED light engine / OLED LED compact Module CLE G2 19mm 15lm ADV EM Modules CLE Product description Ideal for ceiling-mounted and wallmounted luminaires LED system solution consisting of the LED module, the control gear with integrated emergency

More information

LED Driver Linear / area dimming

LED Driver Linear / area dimming Driver LC W 0 1050mA 50V IOTr lp PRE UNV PREMIUM series SELV (US applications) Product description Constant current LED Driver Dimming range 1 100 % Adjustable output current between 0 and 1,050 ma via

More information

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC EM STARK LLE Umodule STARK LLE-G3-24-28-12 CLASSIC EM STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,13 up to 1,64 lm Combined LED module for general and emergency lighting Integrated

More information

Reliability with the most essential intellect. Philips HF-Essential Electronic ballasts for TL5 lamps

Reliability with the most essential intellect. Philips HF-Essential Electronic ballasts for TL5 lamps Reliability with the most essential intellect Philips HF-Essential Electronic ballasts for TL5 lamps HF-Essential - Reliability with the most essential intellect Electronic ballasts for TL5 lamps The cost-saving

More information

TrustSight LED Emergency Lighting

TrustSight LED Emergency Lighting TrustSight Emergency ar 20-95V 3W/6W Datasheet TrustSight LED Emergency Lighting TrustSight ar 20-95V 3W/6W The application of LED technology within the lighting sector also requires integration of reliable

More information

U LED modules, converters and systems GENERAL ILLUMINATION. Umodule STARK QLE CLASSIC EM umodule STARK QLE PHASED OUT. Ordering data.

U LED modules, converters and systems GENERAL ILLUMINATION. Umodule STARK QLE CLASSIC EM umodule STARK QLE PHASED OUT. Ordering data. EM_In() EM_Out(-) D Product description Ideal for linear and panel lights Combined LED module for general and emergency lighting Integrated separate emergency LEDs controlled by EM powerled (2 or 4 W version)

More information

EMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER

EMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER Unity-LED TM is a range of Maintained emergency lighting modules combining both mains and emergency drivers in a compact lowprofile enclosure and suitable for use in either internal or remote self-contained

More information

LED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE

LED light engine / OLED LED linear / area. Module STARK LLE PREMIUM Modules LLE Module STARK LLE PREMIUM Modules LLE Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 125 lm/w at tp = 65 C High colour rendering index CRI > 80 Low tolerances

More information

Emergency lighting units EM Batteries

Emergency lighting units EM Batteries LiFePO4 Accus 1.5 9.0 Ah Lithium Iron Phosphate cells (LiFePO4) Product description High-temperature LiFePO4 cells for use with emergency lighting units Up to 8-year design life 3-year guarantee Properties

More information

EMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER

EMERGENCY ONE-LED TM UNITY-LED TM LED MAINS/EMERGENCY DRIVER Unity-LED TM is a range of Maintained emergency lighting modules combining both mains and emergency drivers in a compact lowprofile enclosure and suitable for use in either internal or remote self-contained

More information

LINEAR LED DRIVERS. ComfortLine Selectable Current (Output Terminal) ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL)

LINEAR LED DRIVERS. ComfortLine Selectable Current (Output Terminal) ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL) LINEAR LED DRIVERS ComfortLine SELECTABLE CURRENT (OUTPUT TERMINAL) 186443, 186444, 186486, 186487, 186488, 186491, 186492, 186737 Typical Applications Built-in in linear luminaires for Office lighting

More information

LED light engines LED linear / area. Module STARK QLE G3 SELECT Modules QLE EXCITE

LED light engines LED linear / area. Module STARK QLE G3 SELECT Modules QLE EXCITE Module STARK QLE G3 SELECT Modules QLE EXCITE Product description Ideal for linear and panel lights Luminous flux range from 1,9 1,62 lm LED system solution with outstanding system efficacy up to 137 lm/w,

More information

LED modules LED linear / area

LED modules LED linear / area Module QLE G2 3x3mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,5 up to 8,2

More information

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE , CLE CLASSIC Modules CLE Product description The round shape downlight solution Designed for simple and cost-effective downlight fixtures No reflector or additional module housing required Efficacy of the module up to 139 lm/w

More information

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE CLASSIC / CLE CLASSIC Modules CLE

PHASED OUT. LED light engine / OLED LED compact. Module STARK CLE CLASSIC / CLE CLASSIC Modules CLE Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation to existing luminarie architecture Luminarie body can act as

More information

LED light engine / OLED LED linear / area

LED light engine / OLED LED linear / area Module QLE G1 488x239mm 25lm ADV-SE Modules QLE Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x

More information

PHASED OUT. LED light engine / OLED LED linear / area. Module QLE G1 488x239mm 2500lm ADV-SE Modules QLE

PHASED OUT. LED light engine / OLED LED linear / area. Module QLE G1 488x239mm 2500lm ADV-SE Modules QLE Product description Ideal for linear and panel lights Excellent homogeneity: the new QLE is designed to provide best homogeneity with 6 x 6 mm and 625 x 625 mm fitting Time saving: less mounting/wiring

More information

LED light engine / OLED LED linear / area

LED light engine / OLED LED linear / area Module QLE G2 38x38mm 5lm ADV-SE Modules QLE Product description Ideal for panel and louvre luminaires, cost-effective replacement for 4 x 14 W (18 W) T5 / T8 lamps Luminous flux range from 3,52 up to

More information

Tunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM

Tunable White LED linear / area. Module LLE G2 PREMIUM LLE PREMIUM Module LLE G2 PREMIUM LLE PREMIUM Product description Linear Tunable White LED module with 2,700 and 6,500 K SMT packages Ideal for linear and panel luminaires Optimal solution for Tunable White applications

More information

LED light engine / OLED LED compact

LED light engine / OLED LED compact Module STARK CLE 12-2 CLASSIC / CLE 13-25 CLASSIC Modules CLE Product description Designed for diffuser downlights and wallmounted luminaires Ideal to realise simple luminarie designs For easy adaptation

More information

LED Emergency Lighting

LED Emergency Lighting TrustSight Emergency SEV & High Voltage Datasheet TrustSight ED Emergency ighting TrustSight inear SEV & High Voltage The application of ED technology within the lighting sector also requires integration

More information

LED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM

LED light engine / OLED LED linear / area. Module LLE PREMIUM CRI90 LLE PREMIUM Module LLE PREMIUM CRI90 LLE PREMIUM Linear Tunable White LED module with 2,700 and 6,500 K SMT packages High module efficacy up to 122 lm/w at tp = 65 C High colour rendering index CRI > 90 Low tolerances

More information

PHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED

PHASED OUT. LED light engine / OLED LED linear / area. Module LLE G3 16x140mm 325lm ADV, LLE G3 16x280mm 650lm ADV Modules LLE ADVANCED Product description Ideal for compact linear luminaires designs Homogenous illumination thanks to small package distance Best refurbishment option for T5 lamps Luminous flux range 29 up to 85 lm LED system

More information

TrustSight LED Emergency Lighting

TrustSight LED Emergency Lighting TrustSight Emergency Point 15-55 V 3 W Datasheet TrustSight LED Emergency Lighting TrustSight Point 15-55 V 3 W The application of LED technology within the lighting sector also requires integration of

More information

SLA DC. LED light engines ready2apply. Module SLA DC G2 50mm SNC Modules SLA ESSENCE

SLA DC. LED light engines ready2apply. Module SLA DC G2 50mm SNC Modules SLA ESSENCE SLA DC Module SLA DC G2 50mm SNC Modules SLA ESSENCE Product description Fits in most existing MR16 / GU10 halogen luminaires Replacement of 50 W MR16 halogen lamps or 20 W HID lamp Module with integrated

More information

LED T8 BP. GE Lighting. Tubular lamps DATA SHEET. Specification Features. Product information. Applications. IEC standards

LED T8 BP. GE Lighting. Tubular lamps DATA SHEET. Specification Features. Product information. Applications. IEC standards GE ighting ED T8 BP Tubular lamps DATA SHEET Product information The GE ED T8 range offers safe, reliable and affordable energy saving alternatives to standard Fluorescent T8 lamps. Available in 60cm,

More information

LED light engines ready2apply. Engine SLA AC G2 50mm SNC Engine SLA ESSENCE

LED light engines ready2apply. Engine SLA AC G2 50mm SNC Engine SLA ESSENCE Engine SLA AC G2 5mm SNC Engine SLA ESSENCE Product description Fits in most existing MR16 / GU1 halogen luminaires 1 W LED Equivalent to 5 W MR16 halogen with higher lumen output Perfect solution for

More information

Combined ballast. Combined ballast XCU 16 XCR 17 XHF Batteries 20. Combined ballast.

Combined ballast. Combined ballast XCU 16 XCR 17 XHF Batteries 20. Combined ballast. Combined ballast Combined ballast XCU 16 XCR 17 XHF 18-19 Batteries 20 15 Combined ballast XCU The XCU combined units together with the appropriate inverter circuits For Linear and TC-L fluorescent lamps

More information

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC STARK LLE

LED light engine / OLED LED linear / area. Umodule STARK LLE-G CLASSIC STARK LLE Umodule STARK LLE-G3-24-28-2 CLASSIC STARK LLE Product description Ideal for linear and panel lights Luminous flux range 1,45 up to 2,11 lm LED system solution with outstanding system efficacy up to 129

More information

Driver LC 17W mA flexc C EXC EXCITE series

Driver LC 17W mA flexc C EXC EXCITE series LC 17 W 250 700 flexc C EXC - Tridonic Seite 1 von 5 Home Products LED Drivers Compact fixed output EXCITE series LC 17 W 250 700 flexc C EXC Driver LC 17W 250 700 flexc C EXC EXCITE series Product description

More information