Driver LC 17W mA flexc C EXC EXCITE series

Transcription

1 LC 17 W flexc C EXC - Tridonic Seite 1 von 5 Home Products LED Drivers Compact fixed output EXCITE series LC 17 W flexc C EXC Driver LC 17W flexc C EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range % (Depending on load. For details refer to chapter 4.7 Dimming in data sheet.) Adjustable output current between 250 and 700 via ready2mains Programmer or I-select 2 plugs Max. output power 17 W Up to 84 % efficiency Nominal life-time up to 100,000 h 5-year guarantee Housing properties Casing: polycarbonate, white of protection IP20 Interfaces ready2mains (configuration and dimming via mains) Terminal blocks: 45 push terminals Functions Adjustable output current in 1--steps (ready2mains, I-select 2) Dimmable via ready2mains interface Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Suitable for emergency escape lighting systems acc. to EN Benefits Application-oriented operating window for maximum compatibility Best energy savings due to high efficiency and dimming via ready2mains Flexible configuration via ready2mains and I-select 2 Reliability proven by life-time up to 100,000 h and 5-year guarantee Typical applications For downlight, spotlight and decorative applications Article number Packaging, carton Packaging, pallet Weight per pc. LC W - flexc C EXC pc(s). pc(s). kg Approval marks: Luminaire types:

2 LC 17 W flexc C EXC - Tridonic Seite 2 von 5 Technical data Rated supply voltage AC voltage range DC voltage range Mains frequency Overvoltage protection Typ. rated current (at V, Hz, full load) () () Typ. current ( V, Hz, full load, dimming level) V V V / / Hz V AC, h Leakage current (at V, Hz, full load) () () µa Max. input power Typ. efficiency (at V, Hz, full load) () λ (at V, Hz, full load) () Typ. input current in no-load operation Typ. input power in no-load operation W C W In-rush current (peak / duration) A / µs THD (at V, Hz, full load) () Time to light (at V, Hz, full load) () Time to light (DC mode) Switchover time (AC/DC) Turn off time (at V, Hz, full load) Output current tolerance () () Max. output current peak (non-repetitive) Output LF current ripple ( Hz) Max. output voltage (U-OUT) Dimming range () Mains surge capability (between L - N) Mains surge capability (between L/N - PE) Burst / surge peaks output side against PE of protection Dimensions L x W x H ms ms s ms output current V kv kv V IP x x mm (1) (2) (3) (4) Valid at 100 % dimming level. Depending on the selected output current. Output current is mean value. The min. achievable dimming level depends on the connected load. For details refer to chapter 4.7 Dimming in data sheet.

3 LC 17 W flexc C EXC - Tridonic Seite 3 von 5 Specific technical data Typ. power Output current () () Min. forward voltage Max. output power Max. forward voltage consumption (at V, Hz, Typ. current consumption (at V, Hz, full load) tc point max. Ambient temperature ta I r v full load) LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C LC W - flexc C EXC V V W W C -... C (1) (2) (3) The table only lists a number of possible operating points but does not cover each single point. The output current can be set within the total value range in 1--steps. Output current is mean value. Not compatible with I-select (generation 1). Document Size Date Data sheet MB // Driver LCA PRE / LC EXC Product manual MB // Leaflet readymains MB // Download all selected files Further information ready2mains ( FAQ LED systems TALEXX ( Reference projects ( Environmental declarations

4 LC 17 W flexc C EXC - Tridonic Seite 4 von 5 ( Certificates / declarations of conformity Article number Certificates LC W - flexc C EXC Certificates () I-SELECT 2 PLUG PRE / EXC Accessories Product description Ready-for-use resistor to set output current value Compatible with LED Driver featuring I-select 2 interface; not compatible with I-select (generation 1) Resistor is base isolated Resistor power 0.25 W Current tolerance ± 2 % additional to output current tolerance Compatible with LED Driver series PRE and EXC Example of calculation R [kω] = 5 V / I_out [] x 1000 Resistor value tolerance 1 %; resistor power 0.1 W; base isolation necessary Article number Colour Marking Current Resistor value Packaging, bag Weight per pc. I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg Blue kω pc(s). kg

5 LC 17 W flexc C EXC - Tridonic Seite 5 von 5 Article number Colour Marking Current Resistor value Packaging, bag Weight per pc. I-SELECT PLUG MA I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg I-SELECT PLUG MA Blue kω pc(s). kg CAD / RAY Article number CAD Files LC W - flexc C EXC CAD ( KB) EPD Article number Environmental Product Declaration (EPD) LC W - flexc C EXC EPD 2018 Tridonic. All rights reserved.