Non-Contact Temperature Measurement
|
|
|
- Myron Chambers
- 5 years ago
- Views:
Transcription
1 Non-Contact Temperature Measurement MAURER INFRARED RADIATION THERMOMETER Temperature range 550 to 4000 C ( F) Temperature control during production process compact units Infrared measuring transducer and electronic process unit in one case with light beam aiming device or viewfinder Series KTR 1085 MAURER Infrared radiation thermometer can also assist you to monitor your heating processes, ensuring a uniform standard of quality for your products. Dr.Georg Maurer GmbH Optoelektronik Industriegebiet 10 D Kohlberg leaflet KTR Telefon +49(0) Telefax +49(0) info@maurer-ir.de
2 Infrared Radiation Thermometer Series KTR 1085 More than 50 years experience in the non-contact temperature measurement and also the continuous development of thermometer makes it possible, that we can offer you a complete program of perfected unit types. Above all the non-contact temperature measurement is approbriated for fast annealing processes. The Series KTR 1085 are partial radiation thermometer, which record the infrared radiation emitted from the heat source over a narrow spectral range, and convert it into a signal suitable for recording, switching and controlling purposes. When using the non-contact temperature measurement it s to note, that the emission of an annealing position is depending on material and surface. This physical characteristic is described as emissivity, and can (if known) be preset at the instrument in the form of an emission factor. Examples for application: steel, iron, non-ferrous metal, wires, glass feeder, glass tub, glass arching, hardening, induction heating, ceramics, soldering, forging, welding, transforming, vacuum-furnace, rolling unit types KTR KTR target marking light beam aiming device optical viewfinder Temperature - Measuring - range Technical Data - linear - No. Meas.- range short Measuring range C ( F) C ( F) Spectral range 0,85-1,1 µm C ( F) Response time ms C ( F) Accuracy 1 % ± 1 C C ( F) Reproducibility C ( F) Emissions factor % C ( F) Working temperature 0 C - 60 C ( F) C ( F) Stock temperature -10 C C ( F) C ( F) Temperature- sensitivity 0,05 % / C C ( F) Humidity tolerance % RF Output (choiceable) 0-20 ma No. Meas.- range long 4-20 ma C ( F) 0-1 V C ( F) Operating voltage DC 24 V ± 10 % C ( F) AC 24 V ± 10 % C ( F) Current input < 160 ma Unit connection 5 - pole socket (Special meas.- range on request) Dimension H / W / D 54 x 54 x 147 mm (2,13x2,13x5,70 inch) Weight 0,6 kg (1,32 lbs) Protection grade IP 65 Objectives: For accommodation to the measuring application are several objectives and optic systems available. Options: - built-in digital display - maximum reading memory scanner electronic process unit electrical assembly mechanical assembly SC 1010 AE digital display - units with cooling case SC 1012 AE contact outputs - blowing device - interface RS 232 o.s. - mirror 90 - power supply 230V/AC - 24 V/DC - mounting parts
3 tables for KTR and QKTR A B KTR M C -type : L 1060-T , ,4 11,6 2, ,6 9,4 3, ,8 7,2 4, ,4 5,6 5, ,4 4,6 6, ,0 7, ,5 3,5 7, ,6 1, ,3 0, ,5 0,5 31 -type : A 1080 Achromat : f 80 31, ,5 13 3, ,9 10,6 4, ,4 9,1 4, ,5 8,0 5, ,4 7,1 6, ,3 6,2 6, ,9 5,6 7, ,4 5,1 7, ,8 4,7 8, ,2 4,3 8, ,5 4,0 9, ,9 3,6 10, ,2 3,3 10, ,4 3,1 11, ,5 3,0 12, ,5 2,0 18, ,2 1,3 24,0 Target=98 % of beam density of the surface
4 tables for KTR and QKTR v A B KTR M C -type : L 1050-N1 Lens : f 50 22, , , ,5 7,5 1, ,0 1, ,5 3,5 1, ,0 2, ,0 2, ,2 -type : L 1060-N1 A/ mm , ,4 11,6 1, ,9 7,1 1, ,3 4,7 2, ,1 2,9 2, ,5 1,5 3, ,8 -type : L 1050-N2 Lens : f 50 22,4 Target size M / mm=d ,0 13,0 1, ,1 10,9 1, ,6 8,4 1, ,9 6,1 1, ,6 4,4 2, ,9 3,1 2, ,9 2,1 2, ,5 1,5 2, ,0 1,0 2, ,5 0,5 3, ,0 0,0 3,3 -type : L 1060-N , ,7 10,3 2, ,9 8,1 2, ,1 6,9 3, ,1 5,9 3, ,0 4, ,0 4, ,9 3,1 5, ,4 2,6 5, ,9 2,1 6, ,2 0,8 9,2 Target=98 % of beam density of the surface
5 Fa.Dr. Maurer GmbH STANDARDGEHÄUSE (standard case) KTR
HBI 22. Integrated Three-phase Synchronous Drive
HBI 22 Integrated Three-phase Synchronous Drive positioning capability up to 9 Watts rated output power with linear hall sensor system with or without parking brake Motor type Dimension L1 L2 HBI 223 125
Linear-Transducer LMP48 - A
Linear-Transducer LMP48 - A Ref.: K-LMP48-A-1 01020102000306 Advantages _ Compact construction _ Further interfaces availabl _ Measures linear movemen _ housing _ Wear-free detection General Data Supply
PCB Relay. 2. Contact Form 2: DPDT 3. Terminal Shape None: PCB terminal F: Surface mount terminal
PCB Relay Ultracompact, Ultrasensitive DPDT Relay Compact size and low 5-mm profile. Low power consumption (140 mw for single-side stable, 100 to 300 mw for latching type) and high sensitivity. Low thermoelectromotive
Pressure Switches. Pressure switches, pneumatic. Pressure switches, electronic
Contents Description Page Pressure switches, pneumatic, with plug 50 Pressure switches, pneumatic, with flat pins 51 Pressure switches, pneumatic 52 55 with internal thread with flange connection Pressure
VHS... Screw Flow Meter
Member of the Group VHS... Screw Flow Meter The normal transmitter with block plug already has a push pull output to serve all NPN or PNP Inputs. It supplies a square wave signal. Those transducers are
Magnetic-inductive flow meter EPS / UMF2. Technical data sheet
Magnetic-inductive flow meter EPS / UMF2 Technical data sheet high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials low-cost grounding
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
Photrix Series Temperature Ranges, Configuration Options, Spot Sizes and other ordering information. Direct Lightpipe. Fiber Optics to Lens
Technical Note # TN 831 Photrix Series Temperature Ranges, Configuration Options, Spot Sizes and other ordering information This Technical Note provides detailed technical information regarding specifications,
DSL-240 MkIII Single Pass Dust Monitor Measures mg/m 3 using DDP
Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions
Low Profile Insertion Vortex
Low Profile Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 24 Heavy Duty & Maintenance Free
Visit us at
testo 810 Instruction manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Short manual testo 810 13 Short manual testo 810 Protection
* _0916* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Synchronous Linear Motors SL2
Drive Technology \ Drive Automation \ System Integration \ Services *23059311_0916* Revision Synchronous Linear Motors SL2 Edition 09/2016 23059311/EN SEW-EURODRIVE Driving the world Table of contents
control systems Made in Italy Integrated systems for the web tension regulation
control systems Integrated systems for the web tension regulation We know that producing quality laminates require very high web tension control. For this reason we provide a very wide range of integrated
Pressure transmitter for general applications Model S-10, standard version Model S-11, flush diaphragm
Electronic Pressure Measurement Pressure transmitter for general applications Model, standard version Model S-11, flush diaphragm WIKA Data Sheet PE 81.01 Applications n Mechanical engineering n Hydraulics
General_technical_data Series
Indicator Lens Actuator Cable 2-poles with plug-in connection 2.8 x 0.8 mm Flat plug-in housing rectangular, AMP No. 626 057-0 Receptacle housing AMP No. 626 0-0 Receptacle socket AMP No. 160 655-2 Wire
Beck. The differential pressure transmitter for air with IP65
Beck. The differential pressure transmitter for air with IP65 Differential pressure transmitter 985 with IP65 General description The differential pressure transmitters of the 985 series are used to measure
AC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
DSL-220 MkIII Single Pass Opacity Monitor Measures 0-100% Opacity
Ideal for monitoring opacity and smoke levels in the exhaust gas of industrial combustion or air filtration processes. In situ measurement directly in exhaust gas flow using the widely accepted light transmission
Product Overview. Linear Transducers
Product Overview Linear Transducers Inductive linear transducers with external electronics How far open is a valve flap? Does the tray have the right thickness? Where exactly does the laser scan the workpiece
Product Overview. Linear Transducers
Product Overview Linear Transducers Inductive linear transducers with external electronics How far open is a valve flap? Does the tray have the right thickness? Where exactly does the laser scan the workpiece
Caution. Description. Specifications and Ordering Information and Accelerometers
R Specifications and Ordering Information 200350 and Accelerometers Description The 200350 and Accelerometers are general purpose, case-mounted seismic transducers designed for use with Trendmaster Pro
SolidFlow. Monitoring of Solids. Product Information. SWR engineering Messtechnik GmbH
EN SolidFlow Product Information Monitoring of Solids SWR engineering Messtechnik GmbH Using SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic ducts.
BM Series. DC Brushless Rotary Servomotors. Standard NEMA frame sizes. Neodymium iron boron rare-earth magnets maximize performance
BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque
Model FVP General Specification. Flanged Vortex Plate. Product Features
Flanged Vortex Plate Product Features Our Inline meters can measure Steam, Gases or Liquids. Measures two times lower than any other Vortex Meter. Heavy Duty & Maintenance Free Design C&C Machined from
Product discontinuation. Notices. Discontinuation Notice of Safety Relay and Socket. G7S series, P7S series. Wire connection
PRODUCT NEWS Product Discontinuation Notices February 1, 2012 Safety Relays No. 2012037E Discontinuation Notice of Safety Relay and Socket., P7S series Product Discontinuation Safety Relay Socket P7S series
Datasheet. Pitch Motor PMSM SP190C8
Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor
Datasheet. Pitch Motor PMSM SP260B8
Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor
Datasheet. Pitch Motor PMSM SP190F8
Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor
G7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
12:1 WIDE-RANGE INFRARED THERMOMETER WITH STAR BURST LASER TARGETING
12:1 WIDE-RANGE INFRARED THERMOMETER WITH STAR BURST LASER TARGETING USER S MANUAL Star Burst Laser Targeting IRT657 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit
Temposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors M-Series Document Part Number 551218 Revision D Temposonics MT Measuring length 50-1500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
LUMINATEC LED TRACK LIGHT. Optional installation methods, for track system or surface mount application. Adopt high performance LED COB.
LUMINATEC LED Optional installation methods, for track system or surface mount application. Adopt high performance LED. Ideal lighting design, imported PC made reflector processed through precise injection
OSLON 9 PowerCluster IR
OSLON 9 PowerCluster IR ILR-IO09-xxxx-SC201-xx Series Product Overview At the heart of each PowerCluster are 9 OSRAM IR OSLON Black Series LEDs, which are today s smallest infrared LED with more than one
Lighting Symbols. Rotating LED LED light source with rotating reflector. LED. Rotating Halogen Halogen bulb light source with rotating reflector.
LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.
Class 100 temperature and humidity dataloggers
Temperature Humidity Light Voltage Current Class 100 temperature and humidity dataloggers Storage capacity : 12,000 measurement points With or without 1-line display Temperature - KT 100 1 internal sensor
SR1V. Industrial Low Cost String Pot
SR1V Industrial Low Cost String Pot User Scalable VDC Output Signal Linear Position Measurement up to 125 inches (3 meters) Designed for Outdoor / Wet environments In-Stock! SR1V is a rugged, low-cost,
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
Premounted Midi Shunts
Application Midi Shunt 088U0181 - with one circuit Midi Shunt 088U0182 - with two circuits Midi Shunt 088U0183 - with three circuits The Danfoss floor heating midi shunt is a series of pre-mounted shunts
Lighting Symbols 100 KM/H
LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting.
Application. Battery. Public Grid GS HYBRID INVERTER
GS HYBRID SOLAR INVERTER Feed from Solar and Power, Grid backup, Build-in Transfer Switch / Solar Charger/ AC Charger, 500W~3kW, Pure Sine Wave Output GSH-15XX and GSH-30XX are the ideal solutions for
Vert-X 31E - 24V / 4-20mA. Applications Concrete pump Access control system Fork lift
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearity (typ.) % of meas. range ±0.3 ±0.3 Max. hysteresis 0.1 0.1 Resolution bit 12 14 Max. repeatability 0.1 0.1
Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN. Rotary Actuators Rated Torque 100 NM (80 ft-lbs)
Data Sheet Field IT Actuators & Positioners Rotary Actuators - Rated Torque 100 Nm (80 ft-lbs) PME 120-AI/AN Electric actuator for continuous duty modulating or pulse input control. Stall proof without
Flowmeter MDW 500. description. 230 VAC (50/60 Hz), 24 VAC/VDC with polarity reversal protection, 110VAC(60Hz) on request
description - industrial inductive flow meter with display unit - innovative and compact connection head design - measurement of different liquids in a variety of sectors - various process connections
Inductive Strip Measurement
Inductive Strip Measurement Strip Guiding Systems for the Metal Industry: maintenance-free, self-regulating, and reliable BMI22 Standard measuring frame - Strip center BMI3 guiding systems in processing
More freedom - lower cost
More freedom - lower cost V1000 MMD - Flexible to operate The V1000 MMD is a frequency converter for decentralized use. It can be mounted directly on the motor, or installed directly next to the motor
Vacuum pumps/generators Small
picompact10 Ejector with COAX patented technology. Reduced air-consumption with 30-50% compared to other ejector technologies. Easy to optimize vacuum performance with a varied selection of micro multi-stage
Industrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
Inductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
Magnetic-inductive flow meter for hazardous areas
Magnetic-inductive flow meter for hazardous areas Technical Datasheet EPX / UMF3 high accuracy: 0.3 % of actual maintenance-free no pressure drop numerous lining materials numerous electrode materials
TWL-Exia. Resistance Thermometers according to DIN. Ignition Protection Exia. Pt 100-sensor class A respectively class B
Resistance Thermometers according to DIN Ignition Protection Exia measuring monitoring analysing TWL-Exia O O Measuring range: -...+600 C OO Pt 100-sensor class A respectively class B OO Output: resistance
USER MANUAL. Blazer Vista 1000/1400/2000. Uninterruptible Power System
USER MANUAL Blazer Vista 1000/1400/2000 Uninterruptible Power System IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for model Blazer Vista 1000/1400/2000
MWD. Industrial Temperature Assemblies RTD. Meassuring range ºC. Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic.
Industrial Temperature Assemblies measuring monitoring analysing MWD OO Meassuring range -200...+600ºC. OO Pt100 sensor class A, class B, class 1/3, class 1/10, or Cryogenic. OO Output: Resistance or analogue
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
Surface mounting, flush mounting, and DIN track mounting
Solid-state Timer H3JA Economical, Compact, Plug-in Timer Time limit, ON-delay, operation with automatic resetting. DIN size (36 x 36 mm), fits standard 8-pin sockets. Wide choice of supply voltages: 24,
Phone: Fax:
www. hi wi n. c om HI WI NCor por at i on 1400Madel i nelane El gi n,i L60124 Phone:8478272270 Fax:8478272291 i nf o@hi wi n. c om www. hi wi n. c om Welcome to HIWIN Welcome to HIWIN Directly driven HIWIN
Heating chamber with mechanical convection
FED series 720 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
Data Sheet for Linear Sensors
HEM12 internal flange HEM12 external flange Displacement sensor for hydraulic applications High degree of protection IP67 and max. 250 bar operating pressure With external magnetic drag - capsule of the
More Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
Frequency 10 to 55 Hz, Amplitude 0.75mm Frequency 10 to 55 Hz, Amplitude 0.75mm. Frequency 10 to 55 Hz, Amplitude 0.75mm
Power Relays RL Series PRODUCT DESCRIPTION Quick Connect Flange Mount SPECIFICATIONS Number of poles pole 2 poles Contact Configuration X (SPST, double make) 2X (DPST, double make) Contact material Ag
Position as per 3/2018
Hera GmbH & Co. KG Dieselstraße 9 D - 32130 Enger Postfach 440 D - 32124 Enger Telefon: + 49 / (0)52 24 / 911-0 Telefax: + 49 / (0)52 24 / 911-215 mail@hera-online.de www.hera-online.de Download of the
M Series 140.D Data Sheet. Two-Point Controller with Moving-Iron or Moving-Coil Movement 90 Dial RW 96 RP 96
Data Sheet M Series 140.D.101.06 RW 96 RP 96 Two-Point Controller with Moving-Iron or Moving-Coil Movement 90 Dial Application The two point controllers RW/RP 96 (M series) with one or two setpoints provide
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High
PFIS Filter Mechanism SPECIFICATION SALT-3130AE VERSION February 2003
PFIS Filter Mechanism SPECIFICATION SALT-3130AE-00012 VERSION 1.0 16 February 2003 1. Scope 1.1 Identification This document covers the design of the Filter Mechanism for PFIS. In it are detailed the specifications,
Model Number Structure
Terminal Relay G6B-4@@ND Compact Terminal Relay with 4 Independent Outputs Equipped with four G6B Mini-relays that are compact, highly sensitive, and highly resistant to dielectric surges, and that can
SA1A and SA1B: High-Speed, Slim Style Photoelectric Sensors
SA1A and SA1B: High-Speed, Slim Style Photoelectric Key features of the SA1A and SA1B include: Ideal for installations with broad or narrow clearances Available with through-beam between the projector
Heating chamber with mechanical convection
FED series 53 Drying ovens / Heating ovens Heating chamber with mechanical convection The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly
611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
TEMPERATURE CONTROL AND MONITORING HYDRAULIC COMPONENTS
Electronic level and temperature control Gasket (NBR) Operating pressure: max. 1 bar Operating temperature: -20 C up to +80 C Ambient temperature: -20 C up to +70 C Weight: approx. 400g Sealing fl uid:
Data Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
Metrology Tools High precision at your fingertips
Metrology Tools High precision at your fingertips - Thermometer - Thermal marking pen - Welding gauge - Wire speed meter - Clamp meter - Dynanometer - Torch gas flow meter Work piece control Generator
Short Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
Relative pressure transmitter type 522 for shipbuilding
Relative pressure transmitter type 522 for shipbuilding Pressure range 0... 2.5 600 bar The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology
User Guide. Panel Mount Digital Tachometer. Model Washington Street Melrose, MA Phone Toll Free
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Back to the Extech 461950 Product Page User Guide Panel Mount Digital Tachometer
GEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
The Widest Range of Products for Diverse Market Applications
The Widest Range of Products for Diverse Market Applications or 50 years, Fairchild Industrial Products Company has maintained an excellent reputation as a manufacturer of precision, high quality, pneumatic,
LED Meteor Pool Lights
LE Pool Lights LE Pool Lights The ARTECTA pool lights are the world's first compact ultra-thin LE underwater fixtures, equipped with an integrated driver. The fixtures can be mounted on a flat surface,
Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated
Proportional cartridge throttle valve, with on-board electronics (OBE) and inductive position transducer, pilot operated RE 29216/09.05 1/18 Type FESE Nominal size 16, 25, 32, 40, 50 Unit series 1 Maximum
G7S Safety Relay. Ordering Information. Safety Relay conforming to EN standard G7S. Accessories Safety Relay Sockets
Safety Relay Safety Relay conforming to EN standard Conforms to pren50205. A minimum of 0.5 mm between contacts even when one contact is welded. (pren50205 Class A) Forcibly guided contacts. The contributes
Air-insulated switchgear UniGear type ZS1
Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 1-7074 D 12-03-2003 - Air-insulated switchgear UniGear type ZS1 ABB Power Technologies / 2-7075 D 1 2-03-2003 - Rated voltage kv 12 17.5
0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
Speed Sensors Line Guide
Speed Sensors Line Guide Speed and reliability. Honeywell S&C offers electronic speed and position sensors designed for enhanced reliability and an extended life. Honeywell uses multiple technologies to
MAIN FUNCTION FEATURES. . D = v t /2
ttp e-te com e-ma l o e-te com LT ASONIC LE EL MEAS EMENT Tel -2-22 Fa -2-22 2 INTRODUCTION The ultrasonic level Indicator is a low-cost, noncontact and easy-to-install measurement device. It is able to
Pursuing high precision, speed, and ease of use
Carbon/Sulfur Analyzers for Solid Materials EMIA series Pursuing high precision, speed, and ease of use Carbon / Sulfur Analyzer High-frequency induction furnace type EMIA-920V2/320V2 Series New EMIA-V2/FA
Continuous level sensor NSL-F-00, -01, -02
SENSORS FOR FOOD AND LIFE SCIENCES. Product Information NSL-F-00, NSL-F-01, NSL-F-02 FOOD Continuous level sensor NSL-F-00, -01, -02 Application/intended use Continuous level monitoring in metallic vessels
Data Sheet Type FF420. Series 420 Specification Flange / Flange. Series 420 Non-Contact Rotary Torque Transducer
Datum Electronics has further extended its standard range of torque transducers to cater for higher rotary speeds and an increased number of torque ranges. The 420 Series torque transducers operate with
RS Stock number
RS Stock number 845-9674 For Contact and n-contact Applications This high quality digital instrument is battery powered and can be used as an optical tachometer for meas-uring rotational speed, or as a
Temperature sensor type T.3., Construction type 3, plug-in sensor for protection tube with lateral cable outlet (Pt100/Pt1000, NTC)
Temperature sensor type T.3., Construction type 3, plug-in sensor for protection tube with lateral cable outlet (Pt100/Pt1000, NTC) Measuring principle Temperature range Protection class Mounting Material
Ultrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD
Ultrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD Features UFM 600 up to 6 metres UFM 200 up to 2 metres for distance, volume and filling level measurement for containers, open basins or channels
OPERATING AND MAINTENANCE MANUAL. Primary Current Injection Test Set. 750ADM-H mk2
OPERATING AND MAINTENANCE MANUAL Product: Type: Primary Current Injection Test Set 750ADM mk2 750ADM-H mk2 DESIGNED AND MANUFACTURED BY: T & R Test Equipment Limited 15-16 Woodbridge Meadows, Guildford,
OEM relative pressure transmitter type 506
OEM relative pressure transmitter type 506 Pressure range -0.5... bar / 0... 10 60 bar Type 506 pressure transmitters are suitable for different applications in the field of industrial refrigeration due
Technical Datasheet P-30/P-31. Standard transmitter.
Technical Datasheet P-/P-1 Standard transmitter www.envec.endress.com two-wire technology 4 2 ma three-wire technology 1 V measuring element with poly-silicon thin-film strain gauge,hence: -no moving mechanical
Servo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29037/10.05 Replaces: 01.05 1/12 Type 4WRPEH 10 Size 10 Unit series 2X Maximum working pressure P, A, B 315 bar, T 250 bar Nominal flow rate 50...100
Temposonics. M-Series Analogue / SIL2* Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm
Temposonics Absolute, Non-Contact Position Sensors M-Series / SIL2* Temposonics MH Measuring Length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders Non-Contact
Scheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
Temposonics. M-Series PWM. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm. Document Number Revision B
Temposonics Absolute, Non-Contact Position Sensors M-Series Temposonics MH Measuring Length 50-2500 mm Document Number 551225 Revision B Compact Sensor for Mobile Hydraulics Linear, absolute Measurement
Power PCB Relay. Type Contact material Contact form Construction Part number General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay Creepage distance of 8.0 mm (0.31 in) min. between coil and contact Dual-winding latching type available Plug-in and quick-connect terminals available High sensitivity (360 mw) and high
FL15 FL50 FL100 USER MANUAL USER MANUAL FL15 PRODUCT OVERVIEW HARDWARE AND SET-UP. page 1
PRODUCT OVERVIEW The FL15, FL50 and FL100 are LED luminaries designed for use with fiber optics for illumination purposes. This FiberLamp line can be used with both end-emitting and side-emitting fiber