DC Submersible Solar Pump Model: RS5000

Transcription

1 DC Submersible Solar Pump Model: RS Page-1 RDH2 RDH3 RDH RDH7 RDH DC Submersible Solar pump type: RDH2 Rated head: 2mtr., 5.HP, Shut off head 25 mtr., With RS controller DC Submersible Solar pump type: RDH3 Rated head: 3mtr., 5.HP, Shut off head 45 mtr., With RS controller DC Submersible Solar pump type: RDH Rated head: mtr., 5.HP, Shut off head 7 mtr., With RS controller DC Submersible Solar pump type: RDH7 Rated head: 7mtr., 5.HP, Shut off head mtr., With RS controller DC Submersible Solar pump type: RDH Rated head: mtr., 5.HP, Shut off head 1 mtr., With RS controller Rated head (mtr.) RDH2 RDH3 RDH RDH7 RDH Discharge (LPD) 2,4, # 1,68, # 1,,8 # 67,2 # 45,6 # 25 Input Voltage (Vmp.) Input Max. Current 48 Wp 17 Adc Water output figures are on a clear sunny day with 3 times tracking of SPV panel, under Average Daily Solar Radiation condition of 7.15 KWh/sq.m on the surface of PV Array (i.e. coplanar with PV module) Standard Test Condition : AM=1.5, 2 E=W/m,Cell Temperature : 25 C # This water output is at STC conditions and testing as per MNRE s latest specifications for Solar water pumps. Rotosol solar submersible pump has a stainless steel SS-34 pump bowl and impellers which are precision laser welded. This ensures long life and high reliability against dust, sand and abrasive elements. The pump elements are driven by a sealed Brushless DC motor filled with oil/water. The motor is made from stainless steel 34 shell and sealed for life. Brushless DC motors has very high efficiency. The motor is driven by a controller which has in inbuilt MPPT (Maximum power point tracker), dry running protection and overheating protection. A special thrust bearing supports the rotor of the motor to withstand the axial thrust of the water column when the pump is switched off..

2 BY ROTOMAG BLDC MOTOR TYPE - MXX FOR SOLAR DC PUMP POWER : XHP/X.XXkW VOLTS : XXX-XXX VEC PWM RPM : XXXX-XXXX SR. NO : XX-XXXXXXX D Page-2 Specifications of BLDC Submersible motor: BLDC motor type M 5HP/3.75kW BY ROTOMAG BLDC MOTOR TYPE - MXX FOR SOLAR DC PUMP POWER : XHP/X.XXkW VOLTS : XXX-XXX VEC PWM RPM : XXXX-XXXX SR. NO : XX-XXXXXXX Output VEC PWM Protection : IP68 Specifications of solar pump head: RDH2 Rated head (mtr.) 2 BY ROTOMAG SOLAR PUMP HEAD TYPE : XXXXXXXXX SR. NO : XX-XXXXXXX RDH3 RDH RDH7 3 7 RDH Dimension of DC submersible solar pump head: B C* Emax BSP thread A * Model RS RDH2 RDH3 RDH A B C D E max BSP 3/2.5 # 3/2.5 # Module Size (Wp) H2 H3 H Approx. Nett Weight in Kg. (± 1.5 kgs.) RDH7 RDH H7 H # Please confirm outlet BSP thread size prior to order. The length is subject to change without notice as R&D is a continuous process and the modification may be required * to suit the modification in I-V curves of the modules and the water output at varying heads. 23

3 Input voltage (Vmp.) Page-3 Specifications of BLDC Submersible controller: Output VEC PWM 4-5 Wp Vdc Vdc V Efficiency of controller at full load % * as per IS/IEC 6529:21 Tested as per IEC , IEC , IEC , IEC for environment and IEC : 1999 for efficiency. Option of Tank Full and Source Empty sensor for auto start and auto stop. * Protection against Open Circuit Accidental Short circuit (2 min. max.) Reverse Polarity Dry run 17 Ø * I.P. test certificate RP Controller Nett weight 7.6 ± 1 kg. 3 Wp, 72 Cell x 16 Panels: 48 W Panel specifications V V 7.71 A 8.48 A Optional PV Array 2 Wp, 6 Cell X 2 Panels: W Panel specifications 32.4 V V 7.71 A 8.48 A 8 Series - 2 Parallel

4 Performance characteristics of type RDH2 & RDH3 (No. :- H2 / H3) 4 1 Mtr. Page-4 max. The water output is with continuous tracking, without tracking water output may reduce by 1-25% depending on angle of incidence. Irradiance measured on an inclined plane Mtr. Flow in M^3/Day Mtr. 4 Mtr Wp kwh/m2/day 9

5 Performance characteristics of type RDH (No. :- H) 2 1 Page-5 max. The water output is with continuous tracking, without tracking water output may reduce by 1-25% depending on angle of incidence. Irradiance measured on an inclined plane. 4 Mtr. Flow in M^3/Day Mtr. 6 Mtr Wp kwh/m2/day 9

6 Page-6 Performance characteristics of type RDH7 & RDH (No. :- H7 / H) max. The water output is with continuous tracking, without tracking water output may reduce by 1-25% depending on angle of incidence. Irradiance measured on an inclined plane. 1 6 Mtr. 14 Flow in M^3/Day Mtr. 8 Mtr. 9 Mtr. Mtr. 11 Mtr Wp kwh/m2/day

7 Pump Set Packing Dimensions & Weight Instruction Manual, Warranty card & TC BLDC motor controller Solar submersible DC motor L H Page-7 Pump Controller With Integrated Remote Monitoring System Remote monitoring system has been integrated with pump controller so that actual field information about voltage, current, temperature and error conditions are available with time on desktop computer as well as on mobile application. Description of system: The remote monitoring system integrated with the DC solar pump controller comprises of GPRS based data transmission modem in an IP54 enclosure. SIM card and SD card are to be separately inserted for remote monitoring system to start transmitting data to our server. The operational data including Input DC voltage, Input DC current, Power (kw), Pump on hour, Number and nature of faults are processed and summarized reports are available. The reports show pump performance and faults in daily, monthly and user configurable periods. This data is transmitted to our server accessed by individual users or corporate users using mobile device or on desktop using appropriate login credentials. W Solar submersible pump head Tool kit box W H RDH2 & 3 41 RDH Supplied Tool Kit Parts RDH7 & 36 4 nos. hex nut Spline tool Insulation tape 8 nos. inline connector 4 Nos M8 hex bolt Zip lock bag 4 Nos M8 plain washer Cushion rubber tap The BLDC Motor & Pump head cannot be used separately. They are uncoupled only for transportation convenience. They can be operated only if coupled together. Do not attempt to use them separately with any other device or parts, otherwise they will be damaged. Technical specifications/details mentioned in this datasheet are subject to change without prior notice. Please contact our sales/marketing team for any updated information or any change done.