FLUID SOLAR. 4 high efficiency submersible solar pumps. PERFORMANCE RANGE Flow rate up to 180 l/min (10.8 m³/h) Head up to 180 m

Transcription

1 FLUID SOLAR ig efficiency submersible solar pumps Clean water (Maximum sand content 5 g/m³) Domestic use Agricultural use PERFORMANCE RANGE Flow rate up to 8 l/min (.8 m³/) Head up to 8 m APPLICATION LIMITS Maximum liquid temperature +35 C Maximum sand content 5 g/m³ Maximum immersion dept of m wit a sufficiently long power cable CONSTRUCTION AND SAFETY STANDARDS EN EN 63- IEC IEC 63- CEI 6-5 CEI 2-3 EU REGULATION N. 57/22 CERTIFICATIONS Company wit management system certified DNV ISO 9: UALITY ISO : ENVIRONMENT TECHNICAL CHARACTERISTICS multi-stage submersible solar pumps Hig performance motor wit permanent magnets Hig efficiency potovoltaic panels PANASONIC mod. VBHN2SJ25 Electronic control incorporated in te motor INSTALLATION AND E Te FLUID SOLAR pumps ave been developed to pump clean water from a well utilising energy obtained from potovoltaic panels. Te electronic control incorporated into te ig performance motor converts te exit voltage from te panels and regulates te velocity of rotation of te motor in order to utilise te available energy most efficiently at any one time: on a sunny day tere will be a ig velocity of rotation wit a raised performance of te pump, and on a cloudy day te velocity and te performance will be reduced. PATENTS - TRADE MARKS Registered Trade Mark n. 563 Patent n. 3386, EP Patent Pending n PCT/IB29/59, PCT/IB2/

2 STANDARD INSTALLATION FLUID SOLAR P = 75 W STANDARD INSTALLATION FLUID SOLAR P = 5 W INSTALLATION REUIREMENTS FOR PUMPS WITH P=75 W In order to acieve its nominal performance te pump must be supplied by potovoltaic panels Te available voltage of eac panel must be in te range from 35 5 VDC Te nominal total power of te panels must be at least 98 Wp INSTALLATION REUIREMENTS FOR PUMPS WITH P=5 W In order to acieve its nominal performance te pump must be supplied by 8 potovoltaic panels Te available voltage of eac panel must be in te range from 35 5 VDC Te nominal total power of te 8 panels must be at least 96 Wp 237

3 FLUID SOLAR CHARACTERISTIC CURVES AND PERFORMANCE DATA Tolerance of caracteristic curves in compliance wit EN ISO 996 Grade 3B g.p.m Imp g.p.m FLUID SOLAR /2 FLUID SOLAR / Flow rate ABSORBED POWER P 75 W Performance wit potovoltaic panels wit a total rated power of 98 Wp m³/ l/min Head H (metres) FLUID SOLAR / FLUID SOLAR / l/min m³/ ABSORBED POWER P 5 W Performance wit 8 potovoltaic panels wit a total rated power of 96 Wp m³/ l/min g.p.m. Imp g.p.m. Head H (metres) FLUID SOLAR 2/ FLUID SOLAR 2/6 3 2 FLUID SOLAR 2/ Flow rate ABSORBED POWER P 75 W Performance wit potovoltaic panels wit a total rated power of 98 Wp m³/ l/min FLUID SOLAR 2/ l/min m³/ ABSORBED POWER P 5 W Performance wit 8 potovoltaic panels wit a total rated power of 96 Wp m³/ l/min Performance wit a solar radiation of W/m 2 and wit an available voltage of te potovoltaic panels of VDC Performance wit a solar radiation of 3 W/m 2 and wit an available voltage of te potovoltaic panels of 7 VDC Te performance curves illustrated above are obtained wit te potovoltaic panels facing SOUTH (facing NORTH for installations in te soutern emispere) and optimising te angle of inclination in relation to te orizon in compliance wit te latitude of te installation site

4 CHARACTERISTIC CURVES AND PERFORMANCE DATA Tolerance of caracteristic curves in compliance wit EN ISO 996 Grade 3B FLUID SOLAR / FLUID SOLAR /8 FLUID SOLAR / g.p.m. Imp g.p.m l/min m³/ Flow rate ABSORBED POWER P 75 W Performance wit potovoltaic panels wit a total rated power of 98 Wp m³/ l/min Head H (metres) FLUID SOLAR /8 ABSORBED POWER P 5 W Performance wit 8 potovoltaic panels wit a total rated power of 96 Wp m³/ l/min g.p.m. Imp g.p.m. 7 Head H (metres) FLUID SOLAR 6/6 FLUID SOLAR 6/3 2 FLUID SOLAR 6/ Flow rate ABSORBED POWER P 75 W Performance wit potovoltaic panels wit a total rated power of 98 Wp m³/ l/min FLUID SOLAR 6/6 l/min m³/ ABSORBED POWER P 5 W Performance wit 8 potovoltaic panels wit a total rated power of 96 Wp m³/ l/min Performance wit a solar radiation of W/m 2 and wit an available voltage of te potovoltaic panels of VDC Performance wit a solar radiation of 3 W/m 2 and wit an available voltage of te potovoltaic panels of 7 VDC Te performance curves illustrated above are obtained wit te potovoltaic panels facing SOUTH (facing NORTH for installations in te soutern emispere) and optimising te angle of inclination in relation to te orizon in compliance wit te latitude of te installation site 239

5 FLUID SOLAR P = 75 W POS. COMPONENT DELIVERY BODY AND EXTERNAL SLEEVE 2 IMPELLERS 3 DIFFERS Noryl FE52PW STAGE BOXES / STAGE LIDS Acciaio inox AISI 3 5 CABLE COVER Acciaio inox AISI 3 CONSTRUCTION CHARACTERISTICS Acciaio inox AISI 3, provvista di bocca di mandata filettata ISO 228/. Lexan -R per FLUID SOLAR /, /, 6/3 Delrin P per FLUID SOLAR 2/ PUMP SHAFT Acciaio inox AISI 3 per FLUID SOLAR /, /, /8, 6/3 7 7 DRIVE COUPLING Acciaio inox AISI 36L per FLUID SOLAR /, /, /8, 6/3 8 MOTOR SHAFT Acciaio inox EN MOTOR SLEEVE Acciaio inox AISI 3 TWO MECHANICAL SEALS SEPARATED BY AN OIL CHAMBER Tenuta Albero Posizione Materiali 8 Tipo Diametro Anello fisso Anello rotante Elastomero STA-7 Ø 7 mm Lato Carburo di motore silicio ST-6 Ø 6 mm Lato Carburo di pompa silicio 9 3 BEARINGS 623 2RS - C3E / 623 ZZ - C3E 2 INVERTER 3 ELECTRIC MOTOR Submersible PEDROLLO motor, suitable for continuous duty (wit dry, rewindable stator). Hig performance motor wit permanent magnets Insulation: class F Protection: IP X8 2 POWER CABLE PBS-P type approved for use in drinking water by ACS in compliance wit BS 692, approval n. ACCLI 2 Standard lengt 2 metres 5 Equipment supplied 6 Equipment supplied: connection kit for RPS2 cables 5 CONTROL BOX 6 CONNECTORS 2 SMK male connectors 2 SMK female connectors Safety cable ancorage point DN DIMENSIONS AND WEIGHT MODEL PORT N DIMENSIONS mm kg * DN STAGES Ø FLUID SOLAR / FLUID SOLAR 2/ FLUID SOLAR / 6. FLUID SOLAR 6/3 ¼ (* weigt of te pump wit control box) Ø 2

6 FLUID SOLAR P = 5 W POS. COMPONENT DELIVERY BODY AND EXTERNAL SLEEVE 2 IMPELLERS Lexan -R CONSTRUCTION CHARACTERISTICS Acciaio inox AISI 3, provvista di bocca di mandata filettata ISO 228/. 2 3 DIFFERS Noryl FE52PW STAGE BOXES / STAGE LIDS Acciaio inox AISI CABLE COVER Acciaio inox AISI 3 6 PUMP SHAFT Acciaio inox AISI DRIVE COUPLING Acciaio inox AISI 36L 8 MOTOR SHAFT Acciaio inox EN MOTOR SLEEVE Acciaio inox AISI 3 7 TWO MECHANICAL SEALS SEPARATED BY AN OIL CHAMBER Tenuta Albero Posizione Materiali Tipo Diametro Anello fisso Anello rotante Elastomero STA-7 Ø 7 mm Lato Carburo di motore silicio ST-6 Ø 6 mm Lato Carburo di pompa silicio 8 9 BEARINGS 323 B 2RS - C3E / 623 ZZ - C3E 3 2 INVERTER 3 ELECTRIC MOTOR Submersible PEDROLLO motor, suitable for continuous duty (wit dry, rewindable stator). Hig performance motor wit permanent magnets Insulation: class F Protection: IP X8 2 POWER CABLE PBS-P type approved for use in drinking water by ACS in compliance wit BS 692, approval n. ACCLI 2 Standard lengt 2 metres Equipment supplied: connection kit for RPS2 cables 5 Equipment supplied 6 5 CONTROL BOX 6 CONNECTORS 2 SMK male connectors 2 SMK female connectors N. 2 Y female/male-male connectors type MC N. 2 Y male/female-female connectors type MC Safety cable ancorage point DN DIMENSIONS AND WEIGHT MODEL PORT N DIMENSIONS mm kg * DN STAGES Ø FLUID SOLAR / FLUID SOLAR 2/ FLUID SOLAR / FLUID SOLAR 6/6 ¼ (* weigt of te pump wit control box) Ø 2