Distribution division. Solar Photovoltaic Catalogue. Premier Plaan. Smart solutions for the solar energy sector around the world

Transcription

1 Distribution division Solar Photovoltaic Catalogue Premier Plaan Smart solutions for the solar energy sector around the world

2 IM60 Series Photovoltaic Modules Peak Power: Wp FEATURES 60 poly-crystalline MOTECH solar cells connected in series Designed for 600V or 1000V applications Designed for optimum use in commercial and residential grid-tied applications Junction box with easy-click SOLARLOK Connectors and cable included 25-year limited warranty on power output, 5-year limited warranty on materials and workmanship BENEFITS Output power tolerance of -3% +5% Robust, clear anodized aluminum frame Certifications* *Please refer to our website for certification and warranty details. 1

3 LDK 215P-220P-225P-230P-235P-240P-245P-250P-20 WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured in ISO 9001 certified factories High-reliability with guaranteed 0/+5 Wp peak power classification WARRANTIES 10 years for product defects in materials & workmanship 12 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power CERTIFICATES IEC EN 61215, IEC EN , CE Conformity UL /03/15 Ed:3 Rev:2008/04/08 ULC/ORD-C second edition 2001/01/01 UL and Canadian standard for safety flat-plate ISO 9001:2008 Quality Management System CEC Listed: modules are eligible for California rebates PV CYCLE: voluntary module take back and recycling program MCS The Microgeneration Certification Scheme UK 2 2

4 Watt Poly Crystalline Module Jinko Solar introduces all new line of high performance modules in wide application. KEY FEATURES Our solar cells offer high conversion efficiency to ensure high quality. Our high performing modules have an industry low tolerance of +/-3%. Can withstand high wind-pressure, snow load and extreme temperature. Passed IEC 5400 Pa mechanical loading test. QUALITY Industry leading power output warranty (12/90%, 25/80%) 5 year warranty on product materials and processing technology ISO 9001:2008 (Quality Management Sysem) certified factory IEC61215, IEC61730 certified products APPLICATIONS On-grid residential roof-tops On-grid commercial/industrial roof-tops Solar power plants Off-grid system Other on-grid applications 3

5 156 Series Monocrystalline Solar Module 235W, 240W, 245W, 250W, 255W I-V CURVES & TEMPERATURE DEPENDENCE OF ISC, VOC, PMAX High Module Conversion Efficiency Easy Installation and Handling for Various Applications Withstanding Mechanical Load up to 5400 Pa Conform wih PV Standards: IEC 61215:2005, IEC 61730:2004, UL 1703 ISO9001, OHSAS18001, ISO14001 We provide a 10 years material and workmanship guarantee for our modules. In addition, a 90% power-output guarantee for 10 years and a 80% power-output guarantee for 25 years of the modules life are provided. 4

6 Aurora TRIO-27.6-TL - TRIO-20.0-TL GENERAL SPECIFICATIONS OUTDOOR MODELS The latest in Power-One s Aurora Trio range, this new-look threephase inverter fills a specific niche in the commercial solar market. This new three-phase inverter benefits from the three-phase inverter technology perfected in the PVI-10.0 and 12.5, probably the world s most commonly used three-phase inverter which has led the way in best-in-class efficiency. Controlling more PV panels than its smaller predecessor, the Trio-27.6 and Trio-20.0 will offer more flexibility and control to installers who have large installations with varying aspects or orientations. This device has two independent MPPTs and efficiency ratings of up to 98.2%. The very wide input voltage range makes the inverter suitable to installations with reduced string size. The new look inverter has new features including a special built-in heat sink compartment and front panel display system. The unit is free of electrolytic capacitors, leading to a longer product lifetime. FEATURES Electrolyte-free power converter to further increase the life expectancy and long term reliability. Quiet Rail. True three-phase bridge topology for DC/AC output converter. Each inverter is set on specific grid codes which can be selected in the field. Dual input sections with independent MPP tracking, allows optimal energy harvesting from two sub-arrays oriented in different directions. Wide input range. Detachable wiring box to allow an easy installation. Integrated string combiner with different options of configuration which include DC and AC disconnect switch in compliance with international Standards (-S2 and -S2X version). High speed and precise MPPT algorithm for real time power tracking and improved energy harvesting. Flat efficiency curves ensure high efficiency at all output levels ensuring consistent and stable performance across the entire input voltage and output power range. Outdoor enclosure for unrestricted use under any environmental conditions. 5

7 Ultra ULTRA TL - ULTRA TL - ULTRA TL GENERAL SPECIFICATIONS CENTRALIZED MODELS The largest solar power inverter in the Power-One Aurora product range, the new Ultra 1.4MW unit is designed with large utility-grade installations in mind. This liquid-cooled, high-powered Aurora inverter is the largest PV inverter available in the market. The compact chassis gives maximum power for the minimum footprint. Industry-leading power conversion efficiencies of up to 98.7%, combined with high-speed Maximum Power Point Tracking (MPPT) channels, optimize energy harvesting across a wide array of operating conditions. Up to four independent MPPT input channels offer maximum flexibility and energy harvesting. This large inverter system significantly reduces the wiring requirements and on-site testing thanks to the presence of separated and dedicated compartments for DC and AC. FEATURES High performance utility grade inverter for large utility PV installations with 98.7% efficiency. Outdoor enclosure for unrestricted use under any environmental conditions. Passive liquid cooling with total segregation of internal compartments assuring a 5-year maintenance cycle. Reduced susceptibility to a single fault. In case of a component failure, a maximum of 350kW will be lost. Extended MPPT input voltage range. Direct transformerless conversion to the 690 Vac output reduces AC distribution cost. Maximum input voltage up to 1100 Vdc, high design flexibility and reduced DC distribution losses for large scale PV plants. Integrated DC and AC distribution and protection. Fully equipped for connection, additional accessories not required. Easy installation and maintenance procedure. Front extractible DC/AC converters and accessibility to all critical parts. Ethernet communication and two independent RS-485 communication interfaces for inverter and intelligent string combiner monitoring. Compliant to BDEW and FERC

8 Kaco 6400M M MAXIMIZE OUTPUT. PERFECT MONITORING. The blueplanet 6400M/7600M inverter with integrated Tigo Maximizer Management Unit (MMU) The Tigo Maximizer system consists of two main components: the Maximizer, an electronic component which is mounted directly on the module, and the Maximizer. Management Unit (MMU), which represents the higher-level intelligence of the system. The Tigo Maximizer optimizes the output power for each module, delivers all the relevant operating data for each module in real time, and allows you to disconnect each module for safe installation, maintenance, or when fighting a fire. The Maximizer Management Unit communicates with all of the module Maximizers (wirelessly), controls all processes in real time, and sends the operating data to an external server. This allows for an online system monitoring with access for a number of users. With the KACO blueplanet 6400M/7600M we now offer you a compact all-in-one solution. The Management Unit (MMU) of the Tigo energy Maximizer has been integrated into a blueplanet 00xi inverter thus combining the features of both devices within a single system: optimizing, transforming and monitoring of solar energy in one with the blueplanet 6400M/7600M. Certifications pending: UL 1741, IEEE 1547, CSA

9 ako HSC2000S 2.0 MW SOLAR STATION (STEEL) Container with DC-distribution, Inverters, Medium-Voltage Transformer and Switchgear The solar station HSC2000S is a new development for large photovoltaic power plants. The 40 ft high-cube container includes the DC-distribution, the inverter, the medium voltage transformer and the medium voltage switchgear. The HSC2000S is a plug and play solution for quick installation with low total costs. The HSC2000S is a completely factoryassembled system only the DC-connections to the photovoltaic array and the AC-connection to the medium-voltage grid have to be done on site. The photovoltaic array is linked via fuses or circuit breakers and an EMC-fi lter to the input of the inverter. As an option, the current in each string (fuse) can be measured separately. The inverter system consists of three identical inverters. These inverters operate independently and feed their output power into different low-voltage windings of a special medium voltage transformer T1 (please refer to the block diagram below), optimized for the photovoltaic array. The container is connected to the grid via the internal medium-voltage switchgear. Optionally, the auxiliaries of the inverter system and the heating can be fed by transformer T2 or from an external source. Each inverter is supplied with all necessary control systems and has its own maximum-power-point tracker. As standard, a PC-based monitoring system with an Ethernet interface provides all important information to the user. In the unlikely case of malfunction, a failure message is generated and sent automatically. Optionally the communication can be realised via GSM modem. 8

10 HELIOTRACKER INNOVA ONE AXIS SOLAR TRACKER FUNCTIONAL ADVANTAGES Modularity. It is composed by groups of mecano-welded structures containing six modules in horizontal which are moved by one axis rotation. It can also be composed by 16 to 40 structural modules, depending on the land and the module-inverter configuration to avoid group and wiring divisions. East-west polar Tracking system with a ±50 angle. It has a tracking system with backtracking which minimizes the shading effect. Production increase of at least 20% compared to 30º fixed structure systems, with only 30% more occupancy. Quick and easy assembly during the civil works. All the welded joints are made at the workshops, leaving for civil works just the screwed joints. The modules are set at 0,3 m (minimum height) and at 2,3 m (maximum height), to avoid the use of scaffolding and special machinery. The simplicity of the structure allows a quick assembly and a simple foundation. Maintenance cost reductions. Each tracker has a single 0,37 Kw lineal actuator, that minimizes the possibilities of failure. There is no need of special elevation machinery for the maintenance of modules, so this implies a cost reduction. Strength in the design, it withstands the most adverse operation conditions. The calculations have been done meeting EUROCODES and local regulations in force. 9

11 Offices: USA, Czech Republic, Spain, Bulgaria, Argentina, France, Italy. Contact: Telephone numbers: Bulgaria: Spain: Czech Republic: