FHOTON SOLARPAK FHOTON SOLARPAK HR FHOTON 3

Transcription

1 PRODUCT CATALOG FHOTON SOLARPAK FHOTON SOLARPAK HR FHOTON 3 franklinwater.eu

2 MOVs for additional lightning protection Operating status indicated by multi-color LED DC power supply input from the solar array IP66 NEMA 4 enclosure for indoor/outdoor use Contacts for up to two level-control switches (can also operate from a pressure switch) Output motor phase connections for threephase induction motor Terminals provided for optional data communications board Jumper section for single- or two-level control Flow switch input to detect dry-run conditions for additional motor and pump protection Removable bottom gland plate for simple conduit installation APPLICATIONS The Fhoton drive supports submersible and surface pumping applications. Livestock watering Tank/cistern filling Wildlife refuge and game farms Rural water supply for villages and homesteads Irrigation systems Fountains Vineyards Renewable energy projects Effluent pumping BUILT-IN DIAGNOSTICS & PROTECTION The Fhoton SolarPAK includes diagnostic features and built-in protection from potential harmful conditions, including: Reverse polarity Surge Underload Undervoltage Locked pump Open circuit Short circuit Overheated controller Dry run 2

3 INDEX Fhoton SolarPAK Centrifugal Features... 4 SolarPAK Contents... 4 Model Nomenclature... 4 SolarPAK model numbers... 5 Fhoton SolarPAK kw Performance... 6 Fhoton SolarPAK kw Performance... 9 Fhoton SolarPAK - Drive Specification...14 Solar PMA Dimensions...15 Solar Controller Dimensions...15 Fhoton SolarPAK Helical Rotor Features...16 SolarPAK HR Contents...16 Model Nomenclature...16 SolarPAK HR Model Numbers...17 Fhoton HR SolarPAK kw Performance...18 Fhoton HR SolarPAK kw Performance...20 Fhoton HR SolarPAK - Drive Specification...21 HR Solar Controller...21 HR Solar PMA Dimensions Solar Controller Dimensions Fhoton Drive Spare Parts " 3~ Encapsulated Solar Motor Fhoton 3 - Power Extension up to 7.5 kw Features Model numbers Specification Solar Controller Specification Motor...29 Specification Pumps...29 Solar PMA Dimensions...30 Solar Controller Dimensions...30 Fhoton Accessories AC/DC Power Converter...31 Fhoton Wi-Fi Module...31 Flow paddle switch Inline flow switch Level Switch DC Disconnect Fhoton SolarPAK Selector Fhoton SolarPAK- Quick Installation Guide...34 NOTE: Franklin Electric S.r.l. reserves the right to amend specification without prior notice For the most up-to-date product information, visit franklinwater.eu. 3

4 FHOTON SOLARPAK CENTRIFUGAL - ALL-IN-ONE PACKAGE The Fhoton SolarPAK Centrifugal is the system solution to your solar pumping requirements. By utilizing quality components, innovative thinking based on global market inputs, and a technical expertise in groundwater pumping, Franklin Electric has developed a rugged, high-output system which tackles the challenges of harsh and remote environments. No other system delivers the features, benefits, and reliability of Fhoton SolarPAK in just one package! FEATURES High-flow system for faster tank-fill and significant water output Proven motor and pump technology for long-term reliability Robust IP66, NEMA 4 enclosure minimizes impact from wildlife, insects, dust, and weather DC solar array Operating status indicated by multi-color LED Terminals provided for an optional data communications board Max Power Point Tracking (MPPT) for maximizing efficiency of input power Soft-start feature prevents water hammer and increases system life Allows use of new solar array or retrofit to existing array (subject to size and performance check) Simple installation with no required maintenance Built-in diagnostics and protection CE, C-Tick, culus and UL approved SOLARPAK CONTENTS Franklin Electric 4" submersible motor Franklin Electric 4" submersible pump Fhoton Solar controller Flow switch Variety of flow rates available: 17, 30, 67, 100, 117 lpm (1, 2, 4, 6, 7 m³/h) Motor and drive ratings available: 0.55 or 1.1 kw MODEL NOMENCLATURE X XX FD SP - X.X KW Drive Rating: 0.55 or 1.1 kw SolarPAK Fhoton Drive Stages: 19, 26, 10, 20, 07, 14, 09, 11 Flow: 1, 2, 4, 6, 7 m³/h 4

5 FHOTON SOLARPAK CENTRIFUGAL SOLARPAK MODEL NUMBERS SolarPAK EU MDL Fhoton Solar Controller Solar Pump (BSPP) Motor* SolarPak Model FDSP 0.55 kw (without pump) FDSP 1.10 kw (without pump) 119-FDSP 0.55 kw 126-FDSP 1.10 kw 210-FDSP 0.55 kw 220-FDSP 1.10 kw 407-FDSP 0.55 kw 414-FDSP 1.10 kw 609-FDSP 1.10 kw 711-FDSP 1.10 kw Order No. Drive Model Part No. m³/h FD Solar 0.55 kw N4 FD Solar 1.1 kw N4 FD Solar 0.55 kw N4 FD Solar 1.1 kw N4 FD Solar 0.55 kw N4 FD Solar 1.1 kw N4 FD Solar 0.55 kw N4 FD Solar 1.1 kw N4 FD Solar 1.1 kw N4 FD Solar 1.1 kw N4 *full 316 stainless steel motors available on request C-62IS C-62IS C-62IS C-62IS C-62IS C-62IS C-62IS C-62IS C-62IS C-62IS002 Solar Pump Part No. kw Part No. Stages Model Flow Switch (NPT) Part No L L VS 1/ L C VS 1/ L C VS 2/ L C VS 2/ L C VS 4/ L F VS 4/ L F VS 6/ L F VS 7/ L F

6 FHOTON SOLARPAK KW PERFORMANCE 119-FDSP-0.55 KW , ,80 FLOW (liter/minute) ,35 FLOW (m³/h) 15 0, , V 98V 112V 126V 140V 154V 168V DRIVE INPUT POWER (WATT) TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 6

7 FHOTON SOLARPAK KW PERFORMANCE 210-FDSP-0.55 KW 80 5,00 4, , ,60 FLOW (liter/minute) FLow (Liters/Minute) ,20 2,70 2,30 Flow (m³/h) FLOW (m³/h) 30 1, ,35 0, V 98V 112V 126V 140V 154V 168V Drive Input Power (Watt) DRIVE INPUT POWER (WATT) 0,45 TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 7

8 FHOTON SOLARPAK KW PERFORMANCE 407-FDSP-0.55 KW 160 9,60 9, ,63 8,20 7, ,30 6,81 6,40 FLOW (liter/minute) FLow (Liters/Minute) ,91 5,45 5,00 4,10 4,10 FLOW (m³/h) Flow (m³/h) 60 3,64 3, ,70 2,30 1, ,35 0, V Drive Input Power (Watt) DRIVE INPUT POWER (WATT) 0,45 TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 8

9 FHOTON SOLARPAK KW PERFORMANCE 126-FDSP-1.1 KW , ,80 FLOW (liter/minute) ,35 FLOW (m³/h) 15 0, , V 199,5V 228V 256,5V 285V 313,5V DRIVE INPUT POWER (WATT) TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 9

10 FHOTON SOLARPAK KW PERFORMANCE 220-FDSP-1.1 KW 160 9,60 9, ,63 8,20 7, ,30 6,81 6,40 FLOW (liter/minute) FLow (Liters/Minute) ,91 5,45 5,00 4,10 4,10 FLOW (m³/h) Flow (m³/h) 60 3,64 3, ,70 2,30 1, ,35 0, V Drive Input Power (Watt) DRIVE INPUT POWER (WATT) 0,45 TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 10

11 FHOTON SOLARPAK KW PERFORMANCE 414-FDSP-1.1 KW , ,80 FLOW (liter/minute) ,35 FLOW (m³/h) 15 0, , V 199,5V 228V 256,5V 285V 313,5V DRIVE INPUT POWER (WATT) TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 11

12 FHOTON SOLARPAK KW PERFORMANCE 609-FDSP-1.1 KW FLOW FLow (liter/minute) (Liters/Minute) Flow (Cubic meters/hour) FLOW (m³/h) V 159V 185.5V 212V 238.5V 265V 291.5V DRIVE Drive Input INPUT Power POWER (Watts) (WATT) TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 12

13 FHOTON SOLARPAK KW PERFORMANCE 711-FDSP-1.1 KW , , , ,00 FLOW (liter/minute) FLow (Liters/Minute) ,80 5,68 4,54 FLOW (m³/h) Flow (m³/h) 60 3, , , ,5V 159V 185,5V 212V 238,5V 265V 291,5V Drive Input Power (Watt) DRIVE INPUT POWER (WATT) TDH (m) PV Power (Watts) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges. 13

14 FHOTON SOLARPAK - DRIVE SPECIFICATION SOLAR CONTROLLER 0.55 kw Model 1.1 kw Model Controller Model No C-62IS C-62IS002 Output Max. Output Voltage 100V AC, 3-phase 200V AC, 3-phase Max. Amps (RMS) 8.6 A, each phase 6.8 A, each phase Output Frequency Hz Efficiency at Max Power 98% PV Source / Input Max. Input Voltage * VDC ** V DC Max. Amps Input 7.2 A DC, continuous 6.2 A DC, continuous Power at MPP Up to 1200 watts Up to 2000 watts VOC 300 V 420 V For Use With Franklin Electric Motor L L Solar Pumps (BSPP) LPM Stages Model No. Stages Model No Controller Size - L x W x D mm 152 x 152 x x 152 x 190 Controller Weight kg Temperature Range Relative Humidity Range Enclosure Rating Operating Conditions -25 C to 50 C (40 C max when using AC generator) 0 to 100% Condensing * 45 and ** 115 VDC for the 0.55 kw and 1.1 kw models respectively should not be interpreted as an adequate rated PV array output voltage for any installation. See the PV Solar Array Specifications and System Sizing program for indication of adequate array voltage to provide useful pumping capability. IP66 14

15 FHOTON SOLARPAK - DRIVE SPECIFICATION SOLAR PMA DIMENSIONS SolarPAK MDL kw Stages A B C Discharge (in) Pump Weight PMA Weight mm mm mm kg kg 119-FDSP 0.55 kw " 1/ FDSP 1.10 kw " 1/ FDSP 0.55 kw " 1/ FDSP 1.10 kw " 1/ FDSP 0.55 kw " 1/ FDSP 1.10 kw " 1/ FDSP 1.10 kw " FDSP 1.10 kw " NOTE: Maximum diameter across cable guard is 99 mm on all models. A B C SOLAR CONTROLLER DIMENSIONS Dimensions A B C D E F G.1 G.2 G.3 G.4 G.5 mm F G.3 G.4 B D C G.1 G.5 E A G.2 15

16 FHOTON SOLARPAK HELICAL ROTOR - ALL-IN-ONE PACKAGE The Fhoton HR SolarPAK System features helical rotor pumps, as an addition to the current Fhoton SolarPAK product family. The helical rotor pump (sometimes called a progressive cavity or positive displacement pump) generates substantial water pressure at lower flows, providing water even during times of indirect sunlight. Since less energy is required, the Fhoton HR SolarPAK utilizes a minimum number of solar panels, making it ideal for applications with flexible water volume requirements. FEATURES Four-inch NEMA standard construction dimensions Flex-shaft that allows for minimal radial wear to the motor Proprietary software provides increased dry-run and low-flow protection without the need for external devices Four-inch Franklin Electric motor Built-in check valve Pump upthrust washer serves as additional shaft protection from excessive wear in the event of reversed rotation Serviceability by pump and motor detaching when needed Unique HR Fhoton drive algorithm provides increased starting torque levels SOLARPAK HR CONTENTS Franklin Electric 4" submersible motor 0.75 kw / 1.1 kw Franklin Electric 4" submersible helical rotor pump 10, 25 or 50 lpm Fhoton Solar controller: 0.55 kw / 1.1 kw MODEL NOMENCLATURE XX - FD SP X.XKW HR Submersible Helical Rotor Pump 0.55 kw / 1.1 kw SolarPAK Fhoton Drive Pump Flow: 10, 25 or 50 lpm 16

17 FHOTON SOLARPAK HELICAL ROTOR SOLARPAK HR MODEL NUMBERS SolarPAK HR EU MDL Fhoton Solar Controller Solar Pump (BSPP)** Motor* Flow Switch Model Order No. Drive Model Part No. lpm Solar Pump Part No. kw Part No. Model Part No. 10-FDSP 0.55 kw-hr FD Solar 0.55 kw N C-62IP SL07S4-HRXB L C FDSP 0.55 kw-hr FD Solar 0.55 kw N C-62IP SL07S4-HRXB L C FDSP 1.10 kw-hr FD Solar 1.10 kw N C-62IP SL07S4-HRXB L C *full 316 Stainless Steel motors available on request ** All pumps included in HR SolarPaks are supplied with an internal check valve. 17

18 FHOTON HR SOLARPAK KW PERFORMANCE 10-FDSP 0.55 KW HR m 25m 40m 0,80 0,68 FLOW (liter/minute) V 65V 91V 104V 120V DRIVE INPUT POWER (WATT) 55m 70m 85m 100m 115m 165V 135V 150V 0,57 0,45 0,34 0,20 0,10 FLOW (m³/h) TDH (m) DRIVE INPUT POWER (WATTS) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 18

19 FHOTON HR SOLARPAK KW PERFORMANCE 25-FDSP 0.55 KW HR m 20m 30m 40m 50m 1, m 70m 80m 90m 130V 1,36 FLOW (liter/minute) V 91V 104V 117V 1,14 0,90 0,68 0,44 0,22 FLOW (m³/h) DRIVE INPUT POWER (WATT) TDH (m) DRIVE INPUT POWER (WATTS) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 19

20 FHOTON HR SOLARPAK KW PERFORMANCE 50-FDSP 1.1 KW HR 70 4, m 20m 30m 40m 50m 60m 70m 80m 90m 3,60 FLOW (LITER/MINUTE) FLOW (liter/minute) V 175V 200V 225V 250V 3,18 2,70 2,30 1,80 1,40 FLOW (CUBIC FLOW METER/HOUR) (m³/h) 15 0, , DRIVE INPUT POWER (WATT) DRIVE INPUT POWER(WATTS) TDH (m) DRIVE INPUT POWER (WATTS) Flow (lpm) NOTE: Refer to drive specifications table in this catalog for PV source power and voltage-recommended operating ranges 20

21 FHOTON HR SOLARPAK - DRIVE SPECIFICATION HR SOLAR CONTROLLER Controller Model No kw Model 1.1 kw Model C-62IP C-62IP001 Output C-62IP002 Max. Output Voltage 100V AC, 3-phase 200V AC, 3-phase Max. Amps (RMS) 8.6 A, each phase 6.8 A, each phase Output Frequency Hz Efficiency at Max Power 98% PV Source / Input Max. Input Voltage * VDC ** V DC Max. Amps Input 7.2 A DC, continuous 6.2 A DC, continuous Power at MPP Up to 1200 watts Up to 2000 watts VOC 300 V 420 V Controller Size - L x W x D mm 152 x 152 x x 152 x 190 Controller Weight kg Temperature Range Relative Humidity Range Enclosure Rating Operating Conditions -25 C to 50 C (40 C max. when using AC generator) 0 to 100% Condensing * 45 and ** 115 VDC for the 0.55 kw and 1.1 kw models respectively should not be interpreted as an adequate rated PV array output voltage for any installation. See the PV Solar Array Specifications and System Sizing program for indication of adequate array voltage to provide useful pumping capability. IP66 21

22 FHOTON HR SOLARPAK - DRIVE SPECIFICATION HR SOLAR PMA DIMENSIONS SolarPAK HR kw A B C Discharge Pump Weight PMA Weight mm mm mm inches mm kg kg 10-FDSP 0.55 kw-hr " 1/ FDSP 0.55 kw-hr " 1/ A 50-FDSP 1.10 kw-hr / NOTE: Maximum diameter across cable guard is 99 mm on all models. C SOLAR CONTROLLER DIMENSIONS Dimensions A B C D E F G.1 G.2 G.3 G.4 G.5 mm B F G.3 G.4 B D C G.1 G.5 E A G.2 22

23 FHOTON DRIVE SPARE PARTS SPARE PARTS MODEL NUMBERS No. part description 1 User Interface Card 2 3 Terminal Block and Filter Card Motor Control Card Layout Qty Rating [kw] Spare part no Power Supply Card Capacitor Board Inverter Card IMS Resistor Card

24 4" 3~ ENCAPSULATED SOLAR MOTOR SPECIFICATION NEMA mounting design Stainless steel splined shaft StatorShield - Franklin encapsulation system Factory filled with Franklin s non-toxic water soluble fill solution High-capacity Kingsbury type water lubricated thrust bearing Field replaceable lead using Franklin s exclusive Water Bloc technology Pressure-equalizing diaphragm High efficiency electrical design for low operation costs All motors manufactured in ISO 9001 certified plants and 100% tested Drinking water approvals Optimized performance with Franklin Fhoton SolarPAK STAINLESS STEEL 304 STAINLESS STEEL 316 Ratings: 0.75 kw and 1.1 kw Thrust load: 4 kn Nominal ambient temperature: 30 C with 0.08 m/s cooling flow Voltage tolerance: -10% / +6% (60 Hz) Protection IP68 / insulation class B Frequency of starts: max. 20 starts/ hour (with min. 3 minutes resting time) Special lead length up to 50 m Vertical and horizontal operation Rotation counter clock wise (reversible) All motors with factory installed leads 3~ PERFORMANCE DATA 60 HZ P N [kw] Thrust F [N] U N [V] n [min-1] I N [A] I A [A] eta (Eff.) [%] at % load cos phi (Pf.) at % load T N 50 % 75 % 100 % 50 % 75 % 100 % [Nm] T A [Nm] 3~ 304SS / 316SS MODEL NUMBERS 60 HZ P N [kw] U N [V] Digit 1-6 Single pack with lead* Standard 304SS 40 motors packing unit Digit 7-10 single pack with lead* Standard 316SS 40 motors packing unit L L L L 6800 *lead lengths motors L : up to 1.1 kw with 1.5 m preassembled cable WINDING RESISTANCES 304SS / 316 SS 60 HZ P N [kw] U N [V] Stator Ref. U - V (Ohm)

25 4" 3~ ENCAPSULATED SOLAR MOTOR MOTOR DIMENSIONS P N [kw] L [mm] M [kg] motor package size motor with lead in single pack (40 motors per package unit) [mm] [kg] [mm] [kg] x 100 x x 500 x x 100 x x 500 x tolerances according to NEMA MG OVERVIEW SPARE PARTS KITS P N [kw] Kit A kw Upper end bell 304SS (Pos. 7-13) incl. Pos Upper end bell 316SS (Pos. 7-13) Kit A2 Lower end bell incl. Thrust Bearing Kit 4000N incl. Pos Kit B Kit C Seal Kit Standard 304SS incl. Pos. 3, 6, 8, 9, 11, 13, Seal Kit Standard 316SS 18, Fastener Kit 304SS incl. Pos. 1, 2, 4, 26 Fastener Kit 316SS ELECTRICAL CONNECTION 3~ MOTORS DOL Electrical connection 3~ motors DOL Motor lead* Ø [mm²] B [mm] H [mm] x ± ± 0.3 Ø H 12,6 25,5 ~ PE GR BR BL PE GR BR BL 3~ M B L L [mm] 304SS / 316SS *Cables are designed for submerged operation. For air operation, please consult Franklin Electric. 25

26 4" 3~ ENCAPSULATED SOLAR MOTOR MOTOR PART DESCRIPTION SS SS Pos. Part Description Qty. Part number 1 Nut M8 4 Kit C 2 Stud M8 4 Kit C 3 Protector (Spline) 1 Kit B 4 Screw (Motor lead) 1 Kit C 5 Motor lead 1 see page 25 6 Washer 1 Kit B 7 Top Endbell, Cover 1 Kit 8 Plug 1 Kit B 9 Filter 1 Kit B 10 Valve 1 Kit 11 Shaft Seal 1 Kit B 12 Top Endbell 1 Kit 13 O-Ring 1 Kit B 14 Rotor 1 on request 15 Stator 1 on request 16 Level washer 1 Kit A 17 Thrust Disc Assy 1 Kit A 18 O-Ring 1 Kit B 19 Bottom Endbell 1 A1 20 Bearing Cage 1 Kit A 21 Segments 3 Kit A 22 Rocking Disc 1 Kit A 23 Diaphragm washer 1 Kit B 24 Diaphragm 1 Kit B Bottom Endbell Cover SS 25 1 Bottom Endbell Cover SS 26 Screw, Cover 3 Kit C

27 FHOTON 3 - POWER EXTENSION UP TO 7.5 KW IP56 NEMA 4 enclosure for indoor/outdoor use Operating status indicated by multi-color LED Jumper section for singleor two-level control Flow switch input to detect dry-run conditions for additional motor and pump protection DC power supply input from the solar array Terminals provided for optional data communication card via FE Connect Contacts for up to two level-control switches MOVs for additional lightning protection Output connections for motor phases FEATURES New Fhoton system covers all existing features of 0.5 and 1.1 kw Fhoton Ideal design for performances up to 7.5 kw Robust IP56, NEMA 4 enclosure minimizes impact from wildlife, insects, dust, and weather CE, C-Tick, culus and UL approved MOBILE APP FEATURES Real-time System Monitoring Motor Frequency Motor Current Motor Voltage Drive Set-up Maximum Frequency Minimum Frequency Minimum Off-time Underload 27

28 FHOTON 3 - POWER EXTENSION UP TO 7.5 KW MODEL NUMBERS Drive Order number 230 V (3-phase) 400 V (3-phase) 2.2 kw 3.0 kw 3.7 kw 5.5 kw 7.5 kw Fhoton SPECIFICATION SOLAR CONTROLLER Controller Model No XXXXX Input DC (PV) 850V DC, open circuit Output Max. Output Voltage up to 460 V AC, 3-phase Max. Amps (RMS) up to 19.9 A, each phase Output Frequency Hz Efficiency at Max Power 98 % (approx.) PV Source Max. Input Voltage * V DC Max. Amps Input 19.3 A DC, continuous Max. Input Power Up to 11.7 kw Controller Size - L x W x D mm 400 x 324 x 233 mm Operating Conditions Temperature Range -25 C to 50 C Relative Humidity Range 0 to 100% Condensing Enclosure Rating Type 4 / IP56 See the PV Solar Array Specifications and System Sizing program for indication of adequate array voltage to provide useful pumping capability. 28

29 FHOTON 3 - POWER EXTENSION UP TO 7.5 KW SPECIFICATION MOTOR P [kw] Thrust F [N] U [kw] n [rpm] I [A] η(eff.) [%] at 100 % load cos φ (Pf.) at 100 % load f [Hz] part number SPECIFICATION PUMPS kw Solar Pump (BSPP) m³/h Stages Solar Pump Part No VS 2/ VS 3/ VS 4/ VS 6/ VS 8/ VS 15/ VS 4/ VS 6/ VS 8/ VS 10/ VS 15/ VS 8/ VS 10/ VS 15/

30 FHOTON 3 - POWER EXTENSION UP TO 7.5 KW SOLAR PMA DIMENSIONS Stages A B C Discharge (in) Pump Weight PMA Weight kw m²/h mm mm mm kg kg "1/ "1/ "1/ " " " "1/ " " " " " " " A B C SOLAR CONTROLLER DIMENSIONS Dimensions A B C D E F G H I J K L M mm

31 FHOTON ACCESSORIES AC/DC POWER CONVERTER For use with 0.5 and 1.1 kw Fhoton Accepts either AC (single-phase) or DC power source* 230 V AC for use with 3-phase, 100 V Franklin Electric submersible motor 230 V AC for use with 3-phase, 200 V Franklin Electric submersible motor Converter box output power becomes the input source supplying the Fhoton Solar Drive Output short circuit protection Type 4 / IP66 indoor/outdoor rated enclosure for durability UL & CE rated Optional communication module *Source power from a single-phase generator, grid-tie AC source, or DC source; can pair with manual- or auto-crossover switch Model Description AC/DC Power Converter, Solar Drive FHOTON WI-FI MODULE The Fhoton Wi-Fi Module (581COMM-APP) is an accessory for the Fhoton Drive which allows wireless communication between the Fhoton Drive and a mobile device (such as a smartphone or tablet) by means of the Fhoton App (for ios or Android devices). Model 581COMM-APP Description Wi-Fi Module 31

32 FHOTON ACCESSORIES FLOW PADDLE SWITCH The flow switch utilizes the force of liquid flow to propel its paddle and to detect the incoming flow or movement of the existing liquid in the pipe. For Flow rates above 4 m³/h; Connection: G1" Model Description Flow Paddle Switch INLINE FLOW SWITCH The Inline Flow Switch operates magnetically. The piston within the switch body should be a free fit and spring back to its off position as soon as flow stops. For flow rates up to 4 m³/h; Connection: G1" Model Description Inline Flow Switch LEVEL SWITCH A float switch is a device used to detect the level of liquid within a tank. Model Description Level Switch DC DISCONNECT To disconnect the drive even under load safely from the solar generator, Franklin Electric offers suitable DC disconnect switches for all different power ratings. Model Description A/800V DC A/800V DC 32

33 FHOTON SOLARPAK SELECTOR Franklin s user-friendly Fhoton TM SolarPAK Selector helps you determine the optimal system for your solar project. Simply input your location, duty requirements and solar panel characteristics (if known) and the system will automatically recommend the Fhoton model and array configuration best for your application. *Above screen shot is illustrative only and is subject to continuous improvement The Franklin Electric Fhoton SolarPAK Selector and other information on our series of solar products can be found at franklinwater.eu/solar 33

34 FHOTON SOLARPAK- QUICK INSTALLATION GUIDE SOLARPAK INSTALLATION The Franklin Electric Fhoton Drive is designed to be part of a system that consists of: C DC Power Solar PV Array B Fhoton Solar Drive SOLAR INVERTER PUMP CONTROLLER D Flow Switch B Heat Sink 2 Pole DC Rated Disconnect F A Pump/Motor Level Control Stop E (OPEN) (CLOSED) A. Pump and Motor B. Fhoton Solar Drive C. Solar Array (not included) D. Flow Switch E. Control Switches (not included) F. DC Disconnect (not included) 34

35 CATALOG REVISION CHANGE NOTICE Rev. No. Changes page 1 SolarPak contents: flow switch added 2 2 Table Solar Controller adjusted 13 3 Performance Curves updated, dimensions updated product picture page 1 and 4, picture circuit board page 2, table page 6 1, 2, 4, 6 5 Performance Curves and tables updated Fhoton HR Solarpak added Fhoton AC/DC Power Converter added 28 Fhoton Wi-fi module added 28 4" 3~ Encapsulated Solar motor added Fhoton Drive Spare parts added 23 8 Performance Curves and tables updated 20 9 Fhoton 3 added pictures exchanged 1, 4, 16, 24 35

36 Franklin Electric Europa GmbH Rudolph-Diesel-Str Wittlich - GERMANY Telefon: +49 (0) Fax: +49 (0) info@franklin-electric.de Single member - Company subject to the control and coordination of Franklin Electric Co., Inc. Franklin Electric S.r.l. reserves the right to amend specification without prior notice franklinwater.eu EN_REV.09_08/2018