FLAT SWIVEL UNITS INSTALLATION SIZE DES190
|
|
- Blaze Parker
- 5 years ago
- Views:
Transcription
1 FLAT SWIVEL UNITS INSTALLATION SIZE DES90 PRODUCT SPECIFICATIONS Forces and moments Indicates the static load on the bearing. Mr Installation size DES90 / Flat Swivel Units / electrical / Swivel- and Rotary Modules INCLUDED IN DELIVERY Commissioning USB RECOMMENDED ACCESSORIES Indra Works Drive Start Up CD Drive controller Profibus Drive control unit SER- COS III, PROFINET IO, EtherNet/IP, EtherCAT Programming cable Fa Fa [N] 8000 Mr [Nm] 525 Power cable 5 m ZUBHCSS ZUBHCS ZUBHCSME ZUBHCSKAP0 ZUBHCSKAL05 Power cable 0 m Power cable 25 m Encoder cable 5 m Encoder cable 0 m Encoder cable 25 m ZUBHCSKAL0 ZUBHCSKAL25 ZUBHCSKAG05 ZUBHCSKAG0 ZUBHCSKAG Data, Drawings, -D Models, Operating Instructions
2 Technical Data Order no. DES90 DES90-99 Drive * AC servo motor Specific to the customer* Rotation angle [ ] unlimited Nominal torque [Nm] 50 Torque max. [Nm] 64 Nominal speed [rpm] 5 Max. speed [rpm] 25 Swivel time 60 with 5 rpm [s]** 4.6 Swivel time 60 with 25 rpm [s]** Moment of inertia max. [kg m²] Jaw speed in positioning mode [rad/s²] 50 Positioning delay [rad/s²] 50 Electrical energy transfer Pneumatic energy transfer [Quantity] Self locking mechanism Helical gear / worm gear Helical gear / worm gear Power transfer Helical gear / worm gear Helical gear / worm gear Repetition accuracy +/- [ ] Operating temperature [ C] Protection to IEC IP54 IP54 Net input voltage x VAC 50HZ Continuous current [A] 2. Peak current [A] 7.4 Weight [kg] *Select the third-party motor corresponding to the motor performance figures in the DES series - Accessories chapter **Swivel time does not depend on the moment of inertia (the maximum moment of inertia must not be exceeded) 4x M0x x ø8h7x0 X x 4x M2x22 0H7x ±0.02 ø0h7 27 4x M2x8 0 4x M0 DIN92* Fixings for swivel unit 4 Lubrication nipple 8 Fixing tool side cm Power cabel cn Encoder cabel em Motor-specific adapter plate on request 45 Installation size DES90 / Flat Swivel Units / electrical / Swivel- and Rotary Modules (75) 4 25 ±0.02 ø8h ~50 6x60 X ~ ±0.02 ø8h Data, Drawings, -D Models, Operating Instructions 66
3 FLAT SWIVEL UNITS DES SERIES ACCESSORIES RECOMMENDED ACCESSORIES 2 DES series accessories / Flat Swivel Units / Specific to the customer / Swivel- and Rotary Modules Indra Works Drive Start Up CD Drive controller Profibus Drive control unit SERCOS III, PROF- INET IO, EtherNet/IP, EtherCAT Line filter Programming cable ZUBHCSS ZUBHCS ZUBHCSME ZUBHCSN ZUBHCSKAP0 4 4 Power cable 5 m Power cable 0 m Power cable 25 m Encoder cable 5 m Encoder cable 0 m ZUBHCSKAL05 ZUBHCSKAL0 ZUBHCSKAL25 ZUBHCSKAG05 ZUBHCSKAG Encoder cable 25 m Straight Fittings - Quick Connect Style Angled Fittings - Quick Connect Style Round plug, straight - M2 socket Round plug, angular - M2 socket ZUBHCSKAG25 GV-8X4 WV-4X8 RSTVSM2G2B-B RSTVSM2W2B-B 7 7 Round plug, straight - M2 plug RSTVSM2G2S-B Round plug, angular - M2 plug RSTVSM2W2S-B Data, Drawings, -D Models, Operating Instructions
4 Technical data for motors MSM09B DES40 BOSCH , IP54 Order no. compatible with Manufacturer Nominal speed [rpm] Max. speed [rpm] Nominal torque [Nm] Torque max. [Nm] Protection to IEC MSM0C DES90 BOSCH ,.8 IP54 DES series accessories / Flat Swivel Units / Specific to the customer / Swivel- and Rotary Modules Data, Drawings, -D Models, Operating Instructions 669
5 FLAT SWIVEL UNITS SERIES DES PRODUCT ADVANTAGES Series DES / Flat Swivel Units / electric / Swivel- and Rotary Modules THE BEST PRODUCT FOR YOUR APPLICATION The unique Decide for yourself! With the standard motor or motors from another manufacturer - You decide what harmonises the best with your system Integrated media transmission The D media exchanger makes cable breaks and undefined interference contours through the power supply line a thing of the past Freely positionable No matter whether your task involves rotating, lifting or cycling: The unit is universally usable and can be uniquely adjusted to your application Our products love the challenge! Extreme conditions, all over the world our tried and tested components and systems give you limitless possibilities: Find the best product for your specific use: HOW TO ORDER CORRECTLY Order no. Feed-through, 2x electrical, x pneumatic DES40 D The product order numbers are arranged according to this diagram: Unpowered; installation provided by customer Data, Drawings, -D Models, Operating Instructions
6 BENEFITS IN DETAIL SERIES CHARACTERISTICS 7 5 Number of installation sizes 2 Swivel angle Torque Weight AP class Energy supply motor cable, female encoder cable, male 2Drive AC servo motor Intake flange for connection to application-specific adapter plate (to be produced by the customer) simple tool connection 4Central bore for cable feed-through 5Mounting and positioning mounting possible from several sides for versatile positioning 6Robust, lightweight housing Hard-coated aluminum alloy 7Force transfer tooth belt/gear rack/worm gear 2 Nm - 64 Nm 4 kg - 5,9 kg Series DES / Flat Swivel Units / electric / Swivel- and Rotary Modules electrical feed-through fluid feed-through Integrated sensing Self locking mechanism Freely selectable positionability Adjustable swivel angle IP54 5 million maintenance-free revolutions (max.) Data, Drawings, -D Models, Operating Instructions 659
2-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW5008
-JAW ANGULAR GRIPPERS INSTALLATION SIZE GPW008 Installation size GPW008 / -Jaw Angular Grippers / pneumatic / Grippers PRODUCT SPECIFICATIONS TECHNICAL DATA Gripping force diagram Forces and moments Displays
More informationSwivel Unit. elektrical
Swivel Unit elektrical Table of contents Swivel Units elektrical Order No. Swivel angle Torque Page [ ] [Nm] Product Information 6 DEF60 min. 30 - max. 330 1,6 10 Order No. Swivel angle Torque max. Page
More informationTable of contents gripper electrical
Gripper electrical Table of contents gripper electrical Order no. Stroke per Gripping force Gripping force Page jaw [mm] in opening [N] in clothing [N] Product Information GEP1402 2 140 14 10 GEP1406C
More informationProduct Information. Universal rotary unit ERS
Product Information ERS ERS Compact. Flexible. Fast. ERS Electrical rotary unit with torque motor and angle of rotation > 360 as well as the pneumatic holding brake and rotary feed-through options, and
More informationRexroth IndraDrive Cs
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Cs Servo drives Compact drives IndraDrive Cs Highly versatile, extremely compact drives
More informationUSER-PROGRAMMABLE AND ROBUST
NC FREELY PROGRAMMABLE ROTARY TABLES NC ROTARY TABLE NC ROTARY TABLE: USER-PROGRAMMABLE AND ROBUST OPTIMISED BEARINGS To achieve maximum quality and reliability, even when under load, all roller bearings
More informationPhone: Fax:
www. hi wi n. c om HI WI NCor por at i on 1400Madel i nelane El gi n,i L60124 Phone:8478272270 Fax:8478272291 i nf o@hi wi n. c om www. hi wi n. c om Welcome to HIWIN Welcome to HIWIN Directly driven HIWIN
More informationMAKES LIGHT WORK OF HEAVY LOADS
CR/TH FREELY PROGRAMMABLE ROTARY TABLES CR/TH HEAVY DUTY ROTARY TABLE CR/TH HEAVY DUTY ROTARY TABLE: MAKES LIGHT WORK OF HEAVY LOADS FOR HORIZONTAL AXES User-programmable rotary barrel drive of the TH
More informationSVTS A Series Capsule
SVTS A Series Capsule OPTIMA SIGNA TRANSMISSION COMPACT HIGH CIRCUIT DENSITY The capsule A Series Slip Rings, thanks to their reduced diameter, guarantees a low peripheral speed between rings and brushes,
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationST AND SW TORQUE ROTARY UNITS
ST/SW ROTATING UNITS ST/SW TORQUE ROTARY UNIT ST AND SW TORQUE ROTARY UNITS CABLE CONNECTION Compact connector for any orientation of cable connection WEISS APPLICATION SOFTWARE Fast, easy and secure setting
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationSRH. Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N..
SRH www.comoso.com Sizes 20.. 60 Weight 2.1 kg.. 21.2 kg Axial force 800 N.. 9000 N Torque 3.0 Nm.. 69.9 Nm Bending moment 10.4 Nm.. 340 Nm Application example Swivel head for the rapid loading and unloading
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationServo drives. Compact drives IndraDrive Cs
Compact drives IndraDrive Cs 2 Bosch Rexroth AG Electric Drives and Controls Documentation Highly versatile, extremely compact drives Power range 100 W to 9 kw Multi-protocol-enabled, Ethernet-based communication
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationCompact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
More informationFlexible. Fast. Reliable. ELM Compact Linear Module
ELM Flexible. Fast. Reliable. ELM Compact Linear Module With linear direct drive and profiled rail guide with integrated measuring system for position detection and temperature monitoring. Field of Application
More informationProduct Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications
Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position
More informationmechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162
Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
More informationLexium integrated drives
Description ILp for DeviceNet, EtherCAT, Modbus TCP, ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for DeviceNet, EtherCAT, Modbus TCP or and a brushless
More informationRobotics Accessories
Robotics Accessories Robotics Accessories Tool Changer Order no. Connection flange Handling weight recommended [kg] Page Product Information 6 WWR40F/WWR40L TK40 15 10 WWR50F/WWR50L TK50 15 12 WWR63F/WWR63L
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationAxis Modules pneumatic
Axis Modules pneumatic Axis Modules XY-Compensation Order no. Stroke XY-Ebene Handling weight Page ± [mm] recommended [kg] Product Information 6 XY70 3 6 10 XY100 5 12 12 XY160 8 30 14 XY220 10 150 16
More informationThe STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
More informationAxial Piston Variable Pump A2VK
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILE with brushless DC motor Description ILE comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and a brushless DC motor.
More informationAccessories Encoders COUNTERS CONTROLLERS ENCODERS. Features. Cable-operated mechanism
5125 Cable-operated mechanism Cable-operated mechanisms transform linear movements - following pull-out and draw-in of a rope - into rotations. Depending on the requirements, these rotations can be used
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationGWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
More informationSVTS A Series Capsule High-current capsule Radio frequency capsule
SVTS A Series Capsule High-current capsule Radio frequency capsule 10 A Series Contents CAPSULE HIGH CURRENT RF NEW NEW Model Out Page SVTS A 01 12mm 14-15 SVTS A 02 15mm 16-17 SVTS A 03 22mm 18-19 SVTS
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationProduct overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)
10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact
More informationSPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
More informationServo drives. Compact Drives IndraDrive Cs
Compact Drives IndraDrive Cs 2 Bosch Rexroth AG Electric Drives and Controls Documentation Highly versatile, extremely compact drives 100 W 3.5 kw Ethernet-based communications, multi-protocol support
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationFor new perspectives. WPLE - line WPLE
54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox
More informationmechanics RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100
Overview RDH-M Indexing table / Rotary unit 2-96 RDH-S Indexing table / Rotary unit 2-98 RDH-XS Indexing table / Rotary unit 2-100 DSH-S Rotary tilting unit 2-102 RF 1 Indexing table 2-104 2-94 Overview
More informationPrecision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationAxial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationmechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216
Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing
More informationSRM Universal Rotary Actuator. The pneumatic Rotary Actuator with the greatest Power Density on the Market
SRM Universal Rotary Actuator The pneumatic Rotary Actuator with the greatest Power Density on the Market SRM Universal Rotary Actuator. Maximum Power Density. Large Through Bore. Maximum Flexibility.
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationHighest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
More informationNC Joining Module NCFN
NC Joining System NC Joining Module NCFN Standard Design for Medium to High Force The NC joining module NCFN with integrated strain gage force sensor for nominal forces of 5... 300 kn is excellent for
More informationProduct Information. Gripper change system GWS
Product Information GWS GWS Flat. Robust. Strong. GWS gripper change system pneumatic gripper change system Field of application Fast conversion of production lines for other products; the use of various
More informationMini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
More informationHighest Precision: Dyna Series
GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested modifications to give you
More informationElectric machine, permanent magnet internal
EM-PMI540-T1500 Electric machine, permanent magnet internal FEATURES Synchronous Reluctance assisted Permanent Magnet (SRPM) technology Extremely compact and robust structure Highest efficiency throughout
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationHighest Precision: Dyna Series
Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationElectromechanical Cylinder EMC
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems
More informationDrive. Guide. Profile rail guide with ball circuit and wiper smooth torsion stiff. Intake flange. Adapter plate
Linear Rail Slides Highlights Drive Double acting pneumatic cylinder maximum drive force in extend and retract movement pressure force up to 1 N Guide Profile rail guide with ball circuit and wiper smooth
More informationHigh Performance: EPR Series
High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents
Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationILA2D572TC1F0 integrated drive ILA with servo motor V - DeviceNet - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - DeviceNet - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Phase
More informationLenze. Drives with worm gearboxes 52.
6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de
More informationSolid State Electronic Pressure Switch with Integral LED Display Model PSD-10
Solid State Electronic Pressure Switch with Integral LED Display Model PSD-10 Electronic Pressure Measurement WIKA Datasheet PSD-10 Applications Hydraulics and pneumatics Filter monitoring Pump control
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1
Characteristics brushless dc motor 24..48V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
More informationThe STH is a mid-range speed and torque gear reducer that
STH-SERIES The STH is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABE planetary gearbox is the interface
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationSwivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
More informationFlexible. Modular. Strong. SWS-L Quick-change System
Flexible. Modular. Strong. SWS-L Quick-change System P neumatic tool changing system with patented locking system for heavy loads. Field of Application C an be used wherever short changeover times between
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationRotary unit ZD 30. Collet holder. Clamping ring housing SK 20 for tools Ø 3-13 mm, with installation ring. Part no.:
Rotary unit ZD 30 Features Low play toothed belt drive with Stepper motor Reduction 1 : 30 Shaft with Ø 15 mm boring Housing flange with inner cone SK 20 Weight: 2,9 kg For pin assignment see page B-122
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationPneumatic Timer. TECHNICAL DATA Display digit roll s, s or s, depending on version Operating pressure 2...
Type 499 Pneumatic Timer Low-cost DIN dimensions Requires little space for installation Pressure-independent No continuous air supply equired Stationary preset value TECHNICAL DATA Display digit roll Time
More informationSKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
More informationFlexible. Modular. Compact. Beta Universal Linear Module
Beta Flexible. Modular. Compact. Beta Universal Linear Module Universal linear module with optional toothed belt or spindle drive and various guiding options. Field of Application Universal linear module
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationEMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
More informationPerformance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
More informationEK 25.1 EK Electric clamping. New sizes 16 & 25 round off the product range
EK 25.1 EK 50.1 Electric clamping New sizes 16 & 25 round off the product range TÜNKERS electric compactclamp 24 V DC (low voltage) Driven via special spindle / toggle-joint mechanism Aluminium housing
More informationUnidrive M700 Class leading performance with onboard real-time Ethernet
Unidrive M Class leading performance with onboard real-time Ethernet. kw -.8 MW Heavy Duty (. hp -, hp) V V V 9 V Unidrive M features Easy click-in keypad connection Range of multi-language LCD keypads
More information2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
More informationCONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS Series IG (manual version) - Quick connector for female threads and shaped elements - Working pressure: from 0 up to 350 bar IG-18-14 66 30 19 1/4"G
More informationmechanics Rotational units made by isel Torquemotor ird B-90 RDH-M RDH-S RDH-XS DSH-S RF 1 Rotary tilting unit Indexing table B-88 B-92 B-94 B-96 B-98
Overview Torquemotor ird B-90 RDH-M Indexing table / Rotary unit B-92 RDH-S Indexing table / Rotary unit B-94 RDH-XS Indexing table / Rotary unit B-96 DSH-S Rotary tilting unit B-98 RF 1 Indexing table
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationMFO200 series 2 Channels (FORJ)Fiber Optic Slip Rings
MFO MFO series MFO fiber optic slip ring support channels fiber optic(sm/mm). It can perfectly transmit data on MFO Series Fiber Optic Slip Rings 5 > million turn -5~5 (PC) MFOA series MFOA fiber optic
More informationLatest News ECDriveS 24 V drive system for roller conveyors
Drive Technology \ Drive Automation \ System Integration \ Services Latest News ECDriveS 24 V drive system for roller conveyors Current status 04/2017 23484055 / EN Table of contents Table of contents
More informationGAM New Products 2018
GAM New Products 218 GPL ROBOTIC PLANETARY GCL ROBOTIC CYCLOIDAL EPR RIGHT ANGLE BEVEL PLANETARY VP PRECISION PLUS SPIRAL BEVEL GAM Can. GAM Company Overview About GAM Founded in 199 by Gary A. Michalek,
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationpremo servo actuators
servo actuators 20 21 the powerful servo actuator platform Absolute precision meets perfect motion: combines precision with motion more efficiently than ever. The central idea behind the first fully scalable
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationThe PReMIeRe of The year
The PReMIeRe of The year SRU-plus pneumatic universal rotary actuator SRU-plus Pneumatic universal rotary actuator SRU-plus one of the most powerful rotary actuator on the market. a consistent modular
More informationLinear Motor Series P10-70
Linear Motor Series P10- Peak force up to 2 500N Velocity up to 5m/s Acceleration up to 100g Free positioning Long life: Linear direct drive The linear motor technology for industrial applications LinMot
More information