8,000/hr creasing. CM Platinum. Same, 20A* or perfing. Same. Same. 4,900/hr straight perf. 3,600/hr creasing. Same, 20A* CM Plus+ Same

Transcription

1

2 Drive Unit with Reverse Head Accessory Holder tpi Perf Blade Score Blade Air Feed Numbering Heads Conveyor Outfeed Repeat Action Head Rotation Job Memory Register Board Numbering or Creasing Positions Impact Perf Max. # of Heads Drive Unit Type, Floor Model Strike Perf 70 lbs. (3kg) Weight Slitting Blade 6 (0.6m) Height wide Width Scoring Options (.m) Length or 7 Feeder Microperf Options Impression Control,, 6, 8,, 6 # - point (7.6cm x.7cm) Min. Stock Size Perf Blade Options 8 x 8 Max. Stock Size Inking System 0,000 sph variable 00 lbs. (9kg) 6 (.7m) 68 (.73m) 0,000 sph variable 5V/60Hz/5A or 30V/50Hz/5A al forward head Inkpad with reservoir No. and letter prefix available 8 digit condensed head 6 digit forward Consecutive, x, x, 3x, x Lockable throughout 360 lbs. (6.5kg) (8cm) (8cm) (30cm) Electronic variable, crash up to 0 parts carbonless, 3A wide or 7,, 6, 8,. 6 6 digit reverse head Current job only, 00 lbs. (5.5kg) 6 (0.6m) (.m) # - point (7.6cm x.7cm) 8 x 8 (5.7cm x 5.7cm) 3,000 sph 0 00 lbs(5.5kg) 6 (0.6m) (.m) 6,000 sph 3 speeds lbs(5.5kg) 6 (0.6m) (.m) lbs. (57kg) 6 (.7m) (.m) GW8000P lbs.(9kg) 6 (.7m) 68 (.73m),000 sph variable GW 000 MCP: wide/narrow MCOS: choice of with Software Upgrade 5 Up to 5 MCP: any ₒangle to 90ₒ MCOS: 5 & 90ₒ 00 lbs. (5.5kg) 6 (.7m) (.m) Stream fed by hand or friction feed Variable ** (7.6cm x.7cm) 8 x 8,000 sph 5V/60Hz/5A or 30V/50Hz/5A CM Pro MCP: 5.3 lbs. (.5kg) MCOS: 9.7 lbs. (3.5kg) 9 (.5cm) 9.5 (9cm) 30 (76m) #-8 point (5-300 gsm) 5 W x L (.7cm x.5cm) MCP:. (3.5cm) WMCOS: 7. (3.5cm) CM MCP/MCOS 0 Up to 0 50 lbs. (kg) 6 (.7m) 60 (.5m) Self centering horizontal air feed ** 8.5 W x 5.5 L (6.3cm x 63.8cm) 3,600/hr creasing,900/hr straight perf, 0A* CM Plus+ 0 Up to 0 70 lbs. (3kg) 6 (.7m) 60 (.5m) Self centering horizontal air feed ** 8,000/hr creasing or perfing, 0A* CM Platinum Graphic Whizard stands behind the quality of the machines it manufactures with a FIVE YEAR LIMITED WARRANTY. This is the best in our industry and reflects our commitment to our product line. Other machines sold by Graphic Whizard carry a one year warranty. GW8000E Graphic Whizard carries a full line of parts and supplies to compliment our machines in the field. All parts and supplies are available through local distributors or directly through Graphic Whizard. Strict quality standards are adhered to, with all of our component parts, in order to ensure top performance. Only parts and supplies provided by Graphic Whizard and our dealers ensure that your warranty remains valid. GW6000 Warranty GW3000 Parts & Supplies GWJunior Graphic Whizard is committed to the manufacturing and distribution of top quality print finishing products. Throughout our manufacturing and distribution processes, there are quality control checks from start to finish. We take pride in our excellence and are continually searching for ways to grow and improve our existing product line. FM50 Graphic Whizard is known worldwide for its creasing and numbering machines. In addition the company manufactures and distributes systems which UV Coat, perf, rotary score, slit and perform other finishing functions. Since 987 the company has installed thousands of systems around the world through its dealers and distributors. Our strong network provides local hands-on sales and technical expertise that is backed by Graphic Whizard s own technical support which is available through our toll free line or website. FM00 Our Products Specifications Our History

3

4 XDC Series of Flood Coaters: XDC 80M, XDC 80A, XDC 660M, XDC 660A, XDC 750M, XDC 750A DLG Spot Coater XDC 750M XDC 750A Floor model, Flood UV Coating Systems Available in M manual models and A automatic models with touch screen controls for easier use UV and IR (3 bulbs) Deep pile feeder; maximum 00kg/0lbs (standard on A models, optional on M models) CE Approved Double sheet detector (standard on A models, optional on M models) Stainless steel doctor blade (on/off lever) 3 roller coating application system Easy set lever for adjusting roller pressure settings and doctor blade NOTE External ventilation or air purification highly recommended Create in-line solutions utilizing the GW Transporter The stand alone, motorized conveyor system can be used to connect any machine to another eliminating the need for additional handling. Easily connect machines of different heights. cylinder allows for height adjustment Min 3 (8.5cm) to a Max 38 (96.5cm) Up to 30 of incline and decline available Variable speed control (up to 0,000 sph) Graphic Whizard has solutions for all of your print finishing needs including: Creasing, UV Coating, Numbering, Perforating & More! Floor model Spot and Flood UV coating system with touch screen controls for easier use IR and UV lamps (two standard) 3 rollers with reverse and variable roller speed ratio control provides best coating results automatic receding stacker Air knife optional for assistance with thin stocks (above 80 gsm) Requires compressed air External ventilation or air purification highly recommended Machinery for all jobs, all budgets! Please visit us at for more information on how you can get the equipment that is right for you and your needs!

5 XDC Series of Flood Coaters Machines: Specs XDC 80M Feed XDC 660M Feed XDC 750M Feed al 08/0-0V phase 60Hz/0A 08/0-0V 3 phase 60Hz/60A 08/0-0V 3 phase 60Hz/60A 5900 /hour (800 m/hour) 5900 /hour (800 m/hour) 5900 /hour (800 m/hour) Max Stock Size 8.80 W (8 cm) 6 W (66 cm) 9.5 W(75 cm) FM 00 Up to 0,000 sheets per hour Excellent quality entrance perf and score Upgradeable to FM 50 FM 50 Up to 0,000 sheets per hour 30-inch long register board for easy set up and perfect registration Conveyor outfeed delivery system included gsm gsm gsm length 99 (5 cm) 99 (5 cm) 99 (5 cm) width 5 (.5 cm) 5 (3 cm) 55 (0 cm) height 36 (9.5 cm) 36 (9.5 cm) 36 (9.5 cm) weight 990 lbs (50 kg) 5 lbs (500 kg) 35 lbs (605 kg) XDC Series of Flood Coaters Automatic Machines: Specs XDC 80A Automatic Feed XDC 660A Automatic Feed XDC 750A Automatic Feed al 08/0-0V phase 60Hz/0A 08/0-0V 3 phase 60Hz/60A 08/0-0V 3 phase 60Hz/60A 5900 /hour (800 m/hour) 5900 /hour (800 m/hour) 5900 /hour (800 m/hour) Max Stock Size 8.80 W (8 cm) x 0 L (7 6 W (66 cm) x L (53 cm) 9.5 W(75 cm)x5 L (63.5 cm) cm) gsm gsm gsm length 9 (30 cm) 5 (38 cm) 30 (330 cm) width 8 ( cm) 55 (0 cm) 59 (50 cm) height 36 (9.5 cm) 36 (9.5 cm) 36 (9.5 cm) weight 90 lbs (50 kg) 300 lbs (590 kg) 75 lbs (670 kg) VividCoater XDC 530 Micro: Specs Vividcoater DLG Models: Specs GW Junior Shown with numbering machine All metal construction Electronic impression control Crash number up to 0 part carbonless Swing up head for easy set up Magnetic register table Foot pedal control for hands-free operation Perforate, score and slit at the entrance of the machine not on an exit shaft. Blades change in seconds without removing any shafts or the blade mount hub. Anvil-style perf provides a burr-free, flat finish. Individually adjust the depth of each perf / score / slit independently. Feeding Systems: the friction fed model uses a top feeding system that virtually eliminates scuffing and allows for the machine to be loaded while running. For delicate or glossy stocks where scuffing must be avoided, the horizontal air fed machine is recommended. The friction fed system can be upgraded, on site, to an air fed model by a qualified technician. GW 3000 Up to 3,000 sheets per hour numbering position per sheet or numbering heads Upgradeable to GW 6000, GW 8000E, GW 8000P or GW 000 al Max Stock Size length width height XDC 530 MICRO 08/0-0V phase 60Hz/30A up to 700 sph 0.75 W (53 cm) 8-50 gsm 9.5 (7 cm) 3.5 (87 cm) 3.5 (97 cm) al Max Stock Size length width height DLG SPOT COATER 0-0V 3 phase/60hz/60a up to 5500sph.5 W(6cm)x 7.7 L(5 cm) gsm 30 (330 cm) (0 cm) 9.5 (5 cm) Modular Design: Any GW model (excluding GW Junior) can be upgraded to any other GW model. Similarly any FinishMaster can be upgraded. The benefit...you never have to trade in your existing machine for a more productive one. If you outgrow it, simply upgrade it. weight 50 lbs (0 kg) weight 975 lbs (350 kg) Shown with optional second head and stand

6 Drive Unit with Reverse Head Accessory Holder tpi Perf Blade Score Blade Air Feed Numbering Heads Conveyor Outfeed Repeat Action Head Rotation Job Memory Register Board Numbering or Creasing Positions Impact Perf Max. # of Heads Drive Unit Type, Floor Model Strike Perf 70 lbs. (3kg) Weight Slitting Blade 6 (0.6m) Height wide Width Scoring Options (.m) Length or 7 Feeder Microperf Options Impression Control,, 6, 8,, 6 # - point (7.6cm x.7cm) Min. Stock Size Perf Blade Options 8 x 8 Max. Stock Size Inking System 0,000 sph variable 00 lbs. (9kg) 6 (.7m) 68 (.73m) 0,000 sph variable 5V/60Hz/5A or 30V/50Hz/5A al forward head Inkpad with reservoir No. and letter prefix available 8 digit condensed head 6 digit forward Consecutive, x, x, 3x, x Lockable throughout 360 lbs. (6.5kg) (8cm) (8cm) (30cm) Electronic variable, crash up to 0 parts carbonless, 3A wide or 7,, 6, 8,. 6 6 digit reverse head Current job only, 00 lbs. (5.5kg) 6 (0.6m) (.m) # - point (7.6cm x.7cm) 8 x 8 (5.7cm x 5.7cm) 3,000 sph 0 00 lbs(5.5kg) 6 (0.6m) (.m) 6,000 sph 3 speeds lbs(5.5kg) 6 (0.6m) (.m) lbs. (57kg) 6 (.7m) (.m) GW8000P lbs.(9kg) 6 (.7m) 68 (.73m),000 sph variable GW 000 MCP: wide/narrow MCOS: choice of with Software Upgrade 5 Up to 5 MCP: any ₒangle to 90ₒ MCOS: 5 & 90ₒ 00 lbs. (5.5kg) 6 (.7m) (.m) Stream fed by hand or friction feed Variable ** (7.6cm x.7cm) 8 x 8,000 sph 5V/60Hz/5A or 30V/50Hz/5A CM Pro MCP: 5.3 lbs. (.5kg) MCOS: 9.7 lbs. (3.5kg) 9 (.5cm) 9.5 (9cm) 30 (76m) #-8 point (5-300 gsm) 5 W x L (.7cm x.5cm) MCP:. (3.5cm) WMCOS: 7. (3.5cm) CM MCP/MCOS 0 Up to 0 50 lbs. (kg) 6 (.7m) 60 (.5m) Self centering horizontal air feed ** 8.5 W x 5.5 L (6.3cm x 63.8cm) 3,600/hr creasing,900/hr straight perf, 0A* CM Plus+ 0 Up to 0 70 lbs. (3kg) 6 (.7m) 60 (.5m) Self centering horizontal air feed ** 8,000/hr creasing or perfing, 0A* CM Platinum Graphic Whizard stands behind the quality of the machines it manufactures with a FIVE YEAR LIMITED WARRANTY. This is the best in our industry and reflects our commitment to our product line. Other machines sold by Graphic Whizard carry a one year warranty. GW8000E Graphic Whizard carries a full line of parts and supplies to compliment our machines in the field. All parts and supplies are available through local distributors or directly through Graphic Whizard. Strict quality standards are adhered to, with all of our component parts, in order to ensure top performance. Only parts and supplies provided by Graphic Whizard and our dealers ensure that your warranty remains valid. GW6000 Warranty GW3000 Parts & Supplies GWJunior Graphic Whizard is committed to the manufacturing and distribution of top quality print finishing products. Throughout our manufacturing and distribution processes, there are quality control checks from start to finish. We take pride in our excellence and are continually searching for ways to grow and improve our existing product line. FM50 Graphic Whizard is known worldwide for its creasing and numbering machines. In addition the company manufactures and distributes systems which UV Coat, perf, rotary score, slit and perform other finishing functions. Since 987 the company has installed thousands of systems around the world through its dealers and distributors. Our strong network provides local hands-on sales and technical expertise that is backed by Graphic Whizard s own technical support which is available through our toll free line or website. FM00 Our Products Specifications Our History

7 Toll Free: Local: Fax: Finch Avenue East, Unit 6 Scarborough, ON MS Z9 (6) (800) sales@pressdown.net