7621/16 ADD 6 NT/kp DGC 1A. Council of the European Union. Brussels, 12 October 2016 (OR. en) 7621/16 ADD 6. Interinstitutional File: 2016/0091 (NLE)

Transcription

1 Council of the European Union Brussels, 12 October 2016 (OR. en) Interinstitutional File: 2016/0091 (NLE) 7621/16 ADD 6 WTO 84 SERVICES 9 COLAC 23 LEGISLATIVE ACTS AND OTHER INSTRUMENTS Subject: Protocol of Accession to the Trade Agreement between the European Union and its Member States, of the one part, and Colombia and Peru, of the other part, to take account of the accession of Ecuador 7621/16 ADD 6 NT/kp DGC 1A EN

2 Hydraulic systems, linear acting (cylinders) Hydraulic power engines and motors, linear acting (cylinders) (excl. hydraulic systems) Hydraulic systems powered using hydraulic fluid power motors (excl. hydraulic power engines and motors, linear acting (cylinders)) 4, Hydraulic fluid power motors (excl. linear acting (cylinders) and hydraulic systems) 4, Hydraulic power engines and motors (excl. linear acting (cylinders), hydraulic systems, hydraulic fluid power motors, hydraulic turbines and water wheels of heading 8410 and steam turbines) 4, Pneumatic power engines and motors, linear-acting, (cylinders) 4, Pneumatic power engines and motors (excl. linear acting) 4, Steam or other vapour power engines (excl. steam or other vapour generating boilers and turbines) Engines and motors, non-electrical (excl. steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors) 4, Parts of reaction engines, n.e.s. (excl. of turbojets) Parts of hydraulic power engines and motors, n.e.s Parts of non-electrical engines and motors, n.e.s Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garages PAC/EU/EC-CO/PE/Annex III/en 662

3 Pumps for liquids, fitted or designed to be fitted with a measuring device (excl. pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages) Hand pumps for liquids (excl. those of subheading and ) Injection pumps for internal combustion piston engine Fuel, lubricating or cooling medium pumps for internal combustion piston engine (excl. injection pumps) Concrete pumps Reciprocating positive displacement hydraulic units, with pumps Dosing and proportioning reciprocating positive displacement pumps, power-driven Hydraulic fluid power piston pumps (excl. hydraulic units) Piston pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic pumps, incl. hydraulic units, and dosing pumps) Reciprocating positive displacement pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, hydraulic units, dosing pumps and general piston pumps) Rotory positive displacement hydraulic units, with pumps Hydraulic fluid power gear pumps (excl. hydraulic units) Gear pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine and hydraulic pumps, incl. hydraulic units) Hydraulic fluid power vane pumps (excl. hydraulic units) PAC/EU/EC-CO/PE/Annex III/en 663

4 Vane pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine and hydraulic pumps, incl. hydraulic units) Screw pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps and hydraulic units) Rotary positive displacement pumps, power-driven (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, gear pumps, vane pumps, screw pumps and hydraulic units) Submersible pumps, single-stage Submersible pumps, multi-stage Glandless impeller pumps for heating systems and warm water supply Pumps, power-driven, with a discharge outlet diameter <= 15 mm (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine and submersible pumps) Channel impeller and side channel pumps Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, single-stage, with single entry impeller, monobloc (excl. pumps of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, submersible pumps and impeller pumps for heating systems and warm water supply) Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, single-stage, with single entry impeller (other than monobloc and excl. pumps of subheading and ) Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, single-stage, with more than one entry impeller (excl. pumps of subheading and and submersible pumps) PAC/EU/EC-CO/PE/Annex III/en 664

5 Radial flow centrifugal pumps with a discharge outlet diameter > 15 mm, multi-stage (excl. pumps of subheading and and submersible pumps) Single-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading and ; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps) Multi-stage centrifugal pumps, power-driven, with a discharge outlet diameter > 15 mm (excl. pumps of subheading and ; fuel, lubricating or cooling medium pumps for internal combustion piston engine; concrete pumps; submersible pumps; impeller pumps for heating systems and warm water supply; channel impeller, side channel and general radial flow pumps) Pumps for liquids, power-driven (excl. those of subheading and , fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds) Liquid elevators (excl. pumps) Parts of pumps for liquids, n.e.s Parts of liquid elevators, n.e.s Vacuum pumps for use in semiconductor production Rotary piston vacuum pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps Diffusion pumps, cryopumps and adsorption pumps Vacuum pumps (excl. vacuum pumps for use in semiconductor production, rotary piston vacuum pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps, diffusion pumps, cryopumps and adsorption pumps) PAC/EU/EC-CO/PE/Annex III/en 665

6 Handpumps for cycles Hand-operated or foot-operated air pumps (excl. handpumps for cycles) 2, Compressors for refrigerating equipment, of a power <= 0,4 kw 2, Compressors for refrigerating equipment, of a power > 0,4 kw, hermetic or semi-hermetic 2, Compressors for refrigerating equipment, of a power > 0,4 kw (excl. hermetic or semi-hermetic compressors) 2, Air compressors mounted on a wheeled chassis for towing, giving a flow per minute <= 2 m³ 2, Air compressors mounted on a wheeled chassis for towing, giving a flow per minute > 2 m³ 2, Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W 3, Axial fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W) Centrifugal fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W) Fans (excl. table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output <= 125 W, axial and centrifugal fans) 2,3 0 2,3 0 2, Hoods incorporating a fan, whether or not fitted with filters, having a maximum horizontal side <= 120 cm Turbocompressors, single-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Turbocompressors, multi-stage (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) 2,2 0 2,2 0 PAC/EU/EC-CO/PE/Annex III/en 666

7 Reciprocating displacement compressors, having a gauge pressure capacity <= 15 bar, giving a flow/h <= 60 m³ (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Reciprocating displacement compressors, having a gauge pressure capacity <= 15 bar, giving a flow/h > 60 m³ (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Reciprocating displacement compressors, having a gauge pressure capacity > 15 bar, giving a flow/h <= 120 m³ (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Reciprocating displacement compressors, having a gauge pressure capacity > 15 bar, giving a flow/h > 120 m³ (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Rotary displacement compressors, single-shaft (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Screw compressors, multi-shaft (excl. compressors for refrigerating equipment and air compressors mounted on a wheeled chassis for towing) Rotary displacement compressors, multi-shaft (excl. compressors for refrigerating equipment, air compressors mounted on a wheeled chassis for towing and screw compressors) Air pumps and ventilating or recycling hoods incorporating a fan, whether or not fitted with filters, with a maximum horizontal side > 120 cm (excl. vacuum pumps, hand- or foot-operated air pumps and compressors) Parts of: air or vacuum pumps, air or other gas compressors, fans and ventilating or recycling hoods incorporating a fan, n.e.s. 2,2 0 2,2 0 2,2 0 2,2 0 2,2 0 2,2 0 2,2 0 2,2 0 2, Window or wall air conditioning machines, self-contained 2, Window or wall air conditioning machines "split-system" PAC/EU/EC-CO/PE/Annex III/en 667

8 Air conditioning machines of a kind used for persons, in motor vehicles Air conditioning machines incorporating a refrigerating unit and a valve for reversal of the cooling-heat cycle (reversible heat pumps) (excl. of a kind used for persons in motor vehicles and self-contained or "split-system" window or wall air conditioning machines) Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excl. of a kind used for persons in motor vehicles, and self-contained or "split-system" window or wall air conditioning machines) Air conditioning machines comprising a motor-driven fan, not incorporating a refrigerating unit but incorporating elements for changing the temperature and humidity (excl. of a kind used for persons in motor vehicles, and self-contained or "split-system" window or wall air conditioning machines) Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s Furnace burners for liquid fuel, incorporating an automatic control device Furnace burners for liquid fuel (excl. those incorporating an automatic control device) Furnace burners, only for gas, monobloc, incorporating a ventilator and a control device Furnace burners for pulverised solid fuel or gas, incl. combination burners (excl. such products only for gas, monobloc, incorporating a ventilator and a control device) Mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances (excl. burners) Parts of furnace burners such as mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances, n.e.s. PAC/EU/EC-CO/PE/Annex III/en 668

9 Industrial or laboratory furnaces and ovens, non-electric, for the roasting, melting or other heat treatment of ores, pyrites or metals (excl. drying ovens) Tunnel bakery ovens, incl. biscuit ovens, non-electric Bakery ovens, incl. biscuit ovens, non-electric (excl. tunnel ovens) Furnaces and ovens for the incineration of rubbish, non-electric Tunnel ovens and muffle furnaces for firing ceramic products, non-electric Industrial or laboratory furnaces, incl. incinerators, non-electric (excl. for the roasting, melting or other heat treatment of ores, pyrites or metals, for the incineration of rubbish, bakery ovens, tunnel ovens and muffle furnaces for firing ceramic products, drying ovens and ovens for cracking operations) Parts of industrial or laboratory furnaces, non-electric, incl. incinerators, n.e.s Combined refrigerator-freezers, of a capacity > 340 l, fitted with separate external doors 1, Combined refrigerator-freezers, of a capacity <= 340 l, fitted with separate external doors 1, Household refrigerators, compression-type, of a capacity > 340 l 1, Household refrigerators, compression-type, table model, of a capacity <= 340 l 2, Household refrigerators, compression-type, building-in type, of a capacity <= 340 l 1, Household refrigerators compression-type, of a capacity <= 250 l (excl. table models and building-in types) 2, Household refrigerators, compression-type, of a capacity > 250 l but <= 340 l (excl. table models and building-in types) 1, Household refrigerators, absorption-type 2, Freezers of the chest type, of a capacity <= 400 l 2,2 0 PAC/EU/EC-CO/PE/Annex III/en 669

10 Freezers of the chest type, of a capacity > 400 l but <= 800 l 2, Freezers of the upright type, of a capacity <= 250 l 2, Freezers of the upright type, of a capacity > 250 l but <= 900 l 2, Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for frozen food storage 2, Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for non-frozen food storage 2, Furniture incorporating refrigerating or freezing equipment, for storage and display (excl. freezers of the chest type of a capacity <= 800 l, freezers of the upright type of a capacity <= 900 l and refrigerated show-cases and counters with a refrigerating unit or evaporator, and deep-freezing furniture) Refrigerating furniture with a refrigerating unit or evaporator (excl. combined refrigerator-freezers, with separate external doors, household refrigerators, refrigerated show-cases and counters and deep-freezing furniture) 2,2 0 2, Heat pumps (excl. air conditioning machines of heading 8415) 2, Refrigerating or freezing equipment (excl. refrigerating and freezing furniture) 2, Furniture designed to receive refrigerating or freezing equipment 2, Evaporators and condensers for refrigerating equipment (excl. for household refrigerators) 2, Parts of refrigerating or freezing equipment and heat pumps, n.e.s. (excl. furniture designed to receive refrigerating or freezing equipment, and evaporators and condensers for refrigerating equipment excl. for household refrigerators) 2, Instantaneous gas water heaters (excl. boilers or water heaters for central heating) 2, Instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters and boilers or water heaters for central heating) 2, Medical, surgical or laboratory sterilizers PAC/EU/EC-CO/PE/Annex III/en 670

11 Dryers for agricultural products Dryers for wood, paper pulp, paper or paperboard Dryers for ceramic articles Dryers (excl. dryers for ceramic articles, for agricultural products, for wood, paper pulp, paper or paperboard, for yarns, fabrics and other textile products, dryers for bottles or other containers, hairdryers, hand dryers and domestic appliances) Distilling or rectifying plant Heat-exchange units (excl. instantaneous heaters, storage water heaters, boilers and equipment without a separating wall) Machinery for liquefying air or other gases Percolators and other appliances for making coffee and other hot drinks (excl. domestic appliances) Machinery, plant and equipment for cooking or heating food (excl. percolators and other appliances for making hot drinks and domestic appliances) Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water Vacuum-vapour plant for the deposition of metal 2, Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, n.e.s. 2, Parts of medical, surgical or laboratory sterilizers, n.e.s. PAC/EU/EC-CO/PE/Annex III/en 671

12 Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excl. of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays, and of furnaces, ovens and other equipment of heading 8514) Calendering or other rolling machines, of a kind used in the textile industry Calendering or other rolling machines, of a kind used in the paper industry Calendering or other rolling machines, of a kind used in the rubber or plastics industry Calendering or other rolling machines (excl. such machines of a kind used in the textile, paper, rubber or plastics industries or for metals or glass) Cylinders for calendering or other rolling machines, of cast iron (other than for metals or glass) Cylinders for calendering or other rolling machines (excl. of cast iron and those for metals or glass) 2, Parts for calendering or rolling machines, n.e.s. (other than for metals or glass and excl. cylinders) 2, Centrifugal cream separators 2, Centrifugal clothes-dryers Centrifuges of a kind used in laboratories 1, Centrifuges, incl. centrifugal dryers (excl. apparatus for isotope separation, cream separators, clothes-dryers, and centrifuges of a kind used in laboratories and in the manufacture of semiconductor wafers) Machinery and apparatus for filtering or purifying water PAC/EU/EC-CO/PE/Annex III/en 672

13 Machinery and apparatus for filtering or purifying beverages (excl.water) Oil or petrol-filters for internal combustion engines Machinery and apparatus for filtering or purifying liquids (excl. such machinery and apparatus for water and other beverages, oil or petrol-filters for internal combustion engines and artificial kidneys) Intake air filters for internal combustion engines Machinery and apparatus for filtering or purifying air (excl. isotope separators and intake air filters for internal combustion engines) Machinery and apparatus for filtering or purifying gases (other than air), by a liquid process (excl. isotope separators) Machinery and apparatus for filtering or purifying gases (other than air), by a catalytic process (excl. isotope separators) Machinery and apparatus for filtering and purifying gases (other than air and excl. those which operate using a liquid or catalytic process, and isotope separators) Parts of centrifuges, incl. centrifugal dryers, n.e.s Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s Dishwashing machines of the household type Dishwashing machines (excl. those of the household type) Machinery for cleaning or drying bottles or other containers (excl. dishwashing machines) PAC/EU/EC-CO/PE/Annex III/en 673

14 Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages Packing or wrapping machinery, incl. heat-shrink wrapping machinery (excl. machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers and machinery for capsuling bottles, jars, tubes and similar containers) Parts of dishwashing machines, n.e.s Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excl. parts of dishwashing machines) Household scales (excl. personal weighing machines and baby scales) Personal weighing machines, incl. baby scales Scales for continuous weighing of goods on conveyors Constant weight scales and scales for discharging a pre-determined weight of material into a bag or container, incl. hopper scales (excl. scales for continuous weighing of goods on conveyors) Check weighers and automatic control machines operating by reference to a pre-determined weight, of a maximum weighing capacity <= 30 kg Machinery for weighing and labelling pre-packaged goods, of a maximum weighing capacity <= 30 kg Shop-scales of a maximum weighing capacity <= 30 kg (excl. machinery for weighing and labelling pre-packaged goods) PAC/EU/EC-CO/PE/Annex III/en 674

15 Weighing machinery of a maximum capacity <= 30 kg (excl. of a sensitivity <= 50 mg; personal weighing machines; household scales; scales for continuous weighing of goods on conveyors; constant weight scales and scales for discharging a predetermined weight, incl. hopper scales; check weighers and automatic control machines for a pre-determined weight; for weighing and labelling packed goods; for use in shops) Check weighers and automatic control machines operating by reference to a pre-determined weight, of a maximum weighing capacity > 30 kg but <= kg Weighing machinery having a maximum weighing capacity of > 30 kg but <= kg (other than personal weighing machines, scales for continuous weighing of goods on conveyors, constant weight scales and scales for discharging a certain weight of material into a bag or container, incl. hopper scales, check weighers and automatic control machines operating by reference to a pre-determined weight) Weighing machinery of a maximum weighing capacity > kg Weighing machine weights of all kinds; parts of weighing machinery, n.e.s Fire extinguishers, whether or not charged, weighing <= 21 kg (excl. fire-extinguishing bombs and grenades) Fire extinguishers, whether or not charged, weighing > 21 kg Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines) Water cleaning appliances with built-in motor, with heating device Water cleaning appliances with built-in motor, without heating device, of an engine power <= 7,5 kw Water cleaning appliances with built-in motor, without heating device, of an engine power >= 7,5 kw Steam or sand blasting machines and similar jet projecting machines, compressed air operated PAC/EU/EC-CO/PE/Annex III/en 675

16 Steam or sand blasting machines and similar jet projecting machines (excl. compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers) Agricultural or horticultural watering appliances, whether or not hand-operated Portable agricultural or horticultural appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powder Agricultural or horticultural sprayers and powder distributors, designed to be mounted on or drawn by tractors Agricultural or horticultural mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders (excl. watering appliances, portable appliances and sprayers and powder distributors designed to be mounted on or drawn by tractors) Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s Parts of fire extinguishers, spray guns and similar appliances, steam or sand blasting machines and similar jet projecting machines and machinery and apparatus for projecting, dispersing or spraying liquids or powders, n.e.s Pulley tackle and hoists, powered by electric motor (other than skip hoists or hoists of a kind used for raising vehicles) Manually operated chain hoists Pulley tackle and hoists (other than skip hoists or hoists of a kind used for raising vehicles), non-powered by electric motor (excl. manually operated chain hoists) Winches and capstans powered by electric motor Winches and capstans powered by internal combustion piston engines Winches and capstans, non-powered by electric motor (excl. powered by internal combustion piston engines) Built-in jacking systems of a type used in garages PAC/EU/EC-CO/PE/Annex III/en 676

17 Jacks and hoists, hydraulic (excl. built-in jacking systems used in garages) Jacks and hoists of a kind used for raising vehicles, not hydraulic Overhead travelling cranes on fixed support Mobile lifting frames on tyres and straddle carriers Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excl. overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes) Tower cranes Portal or pedestal jib cranes Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excl. wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers) Mobile cranes and works trucks fitted with a crane, self-propelled (excl. those on tyres and straddle carriers) Hydraulic cranes designed for the loading and unloading of the vehicle Cranes designed for mounting on road vehicles (excl. hydraulic cranes designed for the loading and unloading of vehicles) Ships' derricks; cranes, incl. cable cranes (excl. overhead travelling cranes, transporter cranes, gantry cranes, portal or pedestal jib cranes, bridge cranes, mobile lifting frames and straddle carriers, tower cranes, works trucks fitted with a crane, mobile cranes and cranes designed for mounting on road vehicles) Self-propelled works trucks powered by an electric motor, with a lifting height >= 1 m 4, Self-propelled works trucks powered by an electric motor, with a lifting height < 1 m 4,5 0 PAC/EU/EC-CO/PE/Annex III/en 677

18 Rough terrain fork-lift and other stacking trucks, self-propelled, with a lifting height >= 1 m 4, Works trucks, self-propelled, with a lifting height >= 1 m, non- powered with an electric motor (excl. rough terrain fork-lift trucks and other stacking trucks) 4, Works trucks, self-propelled, with a lifting height < 1 m, non-powered with an electric motor 4, Works trucks fitted with lifting or handling equipment, not self-propelled Lifts and skip hoists, electrically operated Lifts and skip hoists, non-electrically operated Pneumatic elevators and conveyors, for use in agriculture Pneumatic elevators and conveyors, for bulk materials (excl. those for use in agriculture) Pneumatic elevators and conveyors (excl. for use in agriculture and those for bulk materials) Continuous-action elevators and conveyors for goods or materials, for underground use (excl. pneumatic elevators and conveyors) Continuous-action elevators and conveyors for goods or materials, bucket type (excl. for underground use) Continuous-action elevators and conveyors for goods or materials, belt type (excl. those for underground use) Roller conveyors Continuous-action conveyors for goods or materials (excl. specially designed for underground use, continuous-action conveyors with buckets or belts, wheel conveyors and other roller conveyors, pneumatic continuous-action conveyors and automated material handling machines for transport, handling and storage of material for semiconductor devices) PAC/EU/EC-CO/PE/Annex III/en 678

19 Escalators and moving walkways Teleferics, chairlifts, ski-draglines; traction mechanisms for funiculars Rolling-mill machinery: roller tables for feeding and removing products; tilters and manipulators for ingots, balls, bars and slabs Loaders specially designed for attachment to agricultural tractors Loaders for use in agriculture (excl. those specially designed for attachment to agricultural tractors) Mechanical loaders for bulk material (excl. those for use in agriculture and self-propelled shovel loaders) Lifting, handling, loading or unloading machinery, n.e.s Self-propelled bulldozers and angledozers, track laying Self-propelled bulldozers and angledozers, on wheels Self-propelled graders and levellers Self-propelled scrapers Self-propelled roadrollers, vibratory Self-propelled roadrollers (other than vibratory) Self-propelled tamping machines (excl. roadrollers) Self-propelled front-end shovel loaders specially designed for underground use Self-propelled front-end crawler shovel loaders (other than specially designed for underground use) PAC/EU/EC-CO/PE/Annex III/en 679

20 Self-propelled front-end shovel loaders (other than specially designed for underground use or crawler shovel loaders) Self-propelled track-laying excavators, with a 360 revolving superstructure Self-propelling mechanical shovels with a 360 revolving superstructure (other than on track-laying excavators) Self-propelled mechanical shovels, excavators and shovel loaders (excl. self-propelled mechanical shovels with a 360 revolving superstructure and front-end shovel loaders) Pile-drivers and pile-extractors (excl. those mounted on railway wagons, motor vehicle chassis or lorries) Snowploughs and snowblowers (excl. those mounted on railway wagons, motor vehicle chassis or lorries) Self-propelled coal or rock cutters and tunnelling machinery (excl. hydraulically operated self-advancing supports for mines) Coal or rock cutters and tunnelling machinery, not self-propelled (excl. hand-operated tools and hydraulically operated self-advancing supports for mines) Self-propelled boring or sinking machinery for boring earth or extracting minerals or ores (excl. those mounted on railway or tramway wagons, motor vehicle chassis or lorries and tunnelling machinery) Boring or sinking machinery for boring earth or extracting minerals or ores, not self-propelled and not hydraulic (excl. tunnelling machinery and hand-operated tools) Self-propelled earth-moving machinery, n.e.s Tamping or compacting machinery, not self-propelled (excl. hand-operated tools) Earth moving machinery, not self-propelled, n.e.s. PAC/EU/EC-CO/PE/Annex III/en 680

21 Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s Parts of lifts, skip hoists or escalators, n.e.s Parts of rolling-mill machinery of subheading , n.e.s Parts of lifting, handling, loading or unloading machinery (e.g. conveyors, teleferics), n.e.s. (excl. of lifts, skip hoists or escalators and of rolling-mill machinery of subheading ) Buckets, shovels, grabs and grips for machinery of heading 8426, 8429 and Bulldozer or angledozer blades, n.e.s Parts for boring or sinking machinery of subheading or , n.e.s Parts of machinery of heading 8426, 8429 and 8430 of cast iron or cast steel, n.e.s Parts of machinery of heading 8426, 8429 and 8430, n.e.s Mouldboard ploughs for use in agriculture, horticulture or forestry Ploughs for use in agriculture, horticulture or forestry (excl. mouldboard ploughs) Disc harrows for use in agriculture, horticulture or forestry Scarifiers and cultivators for use in agriculture, horticulture and forestry Harrows for use in agriculture, horticulture and forestry (excl. disc harrows) Rotovators for use in agriculture, horticulture and forestry PAC/EU/EC-CO/PE/Annex III/en 681

22 Weeders and hoes for use in agriculture, horticulture and forestry (excl. rotovators) Central driven precision spacing seeders for use in agriculture, horticulture and forestry Seeders for use in agriculture, horticulture and forestry (excl. central driven precision spacing seeders) Planters and transplanters for use in agriculture, horticulture and forestry Mineral or chemical fertiliser distributors for use in agriculture, horticulture and forestry (excl. sprayers) Farmyard manure or compost spreaders for use in agriculture, horticulture and forestry (excl. sprayers) Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports-ground rollers (excl. sprayers and dusters, ploughs, harrows, scarifiers, cultivators, weeders, hoes, seeders, planters, manure spreaders and fertiliser distributors) Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation or of lawn or sports-ground rollers, n.e.s Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a horizontal plane Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, with a seat Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, without a seat Mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane not self-propelled Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a vertical plane or with cutter bars PAC/EU/EC-CO/PE/Annex III/en 682

23 Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, with a seat Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, without a seat Motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, not self-propelled Mowers for lawns, parks or sports grounds, without motor Motor mowers (excl. mowers for lawns, parks or sports grounds) Mowers, incl. cutter bars, designed to be carried on or hauled by a tractor, with the cutting device rotating in a horizontal plane Mowers, incl. cutter bars, designed to be carried on or hauled by a tractor, with the cutting device rotating in a vertical plane or with cutter bars Mowers (excl. mowers designed to be carried on or hauled by a tractor, mowers for lawns, parks or sports grounds, motor mowers and combine harvester-threshers) Turners, side delivery rakes and tedders, for haymaking Haymaking machinery (excl. turners, side delivery rakes, tedders and mowers) Pick-up balers for straw or fodder Straw or fodder balers (excl. pick-up balers) PAC/EU/EC-CO/PE/Annex III/en 683

24 Combine harvester-threshers Threshing machinery (excl. combine harvester-threshers) Potato-diggers and potato harvesters Beet-topping machines and beet harvesters Root or tuber harvesting machines (excl. potato-diggers and potato harvesters and beet-topping machines and beet harvesters) Forage harvesters, self-propelled Forage harvesters, not self-propelled Grape harvesters Harvesting machinery for agricultural produce (excl. mowers, haymaking machinery, straw and fodder balers, incl. pick-up balers, combine harvester-threshers and other threshing machinery, root or tuber harvesting machines, forage harvesters and grape harvesters) Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce (excl. machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables of heading 8437) Parts of harvesting machinery, threshing machinery, mowers and machines for cleaning, sorting or grading agricultural produce, n.e.s Milking machines Dairy machinery (excl. refrigerating or heat treatment equipment, cream separators, clarifying centrifuges, filter presses and other filtering equipment) PAC/EU/EC-CO/PE/Annex III/en 684

25 Parts of milking machines and dairy machinery, n.e.s Presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages (excl. machinery for the treatment of these beverages, incl. centrifuges, filter presses, other filtering equipment and domestic appliances) Parts of presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages, n.e.s Machinery for preparing animal feedingstuffs in agricultural holdings and similar undertakings (excl. machinery for the feedingstuff industry, forage harvesters and autoclaves for cooking fodder) Poultry incubators and brooders Poultry-keeping machinery (excl. machines for sorting or grading eggs, poultry pickers of heading 8438 and incubators and brooders) Forestry machinery, n.e.s Automatic drinking bowls Agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, n.e.s. (excl. automatic drinking bowls) Parts of poultry-keeping machinery or poultry incubators and brooders, n.e.s Parts of agricultural, horticultural, forestry or bee-keeping machinery, n.e.s Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables Machinery used in the milling industry or for the working of cereals or dried leguminous vegetables (excl. farm-type machinery, heat treatment equipment, centrifugal dryers, air filters and machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables) PAC/EU/EC-CO/PE/Annex III/en 685

26 Parts of machinery used in the milling industry or for the working of cereals or dried leguminous vegetables or machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables, n.e.s Bakery machinery (excl. ovens and dough rollers) Machinery for the industrial preparation or manufacture of macaroni, spaghetti or similar products (excl. macaroni drying machines and dough rollers) Machinery for the industrial preparation or manufacture of confectionery, cocoa or chocolate (excl. centrifuges and filtering, heating or refrigerating equipment) Machinery for sugar manufacture (excl. centrifuges and filtering, heating or refrigerating equipment) Brewery machinery (excl. centrifuges and filtering, heating or refrigerating equipment) Machinery for the industrial preparation of meat or poultry (excl. cooking and other heating appliances and refrigerating or freezing equipment) Machinery for the industrial preparation of fruits, nuts or vegetables (excl. cooking and other heating appliances, refrigerating or freezing equipment and machinery for the sorting or grading of fruit and vegetables) Machinery for the industrial preparation of tea or coffee (excl. centrifuges, filtering equipment, roasters, freeze-dryers and other heating appliances) Machinery for the industrial preparation or manufacture of drink (excl. centrifuges, filtering, heating or refrigerating equipment) Machinery for the industrial preparation or manufacture of food or drink, n.e.s Parts of machinery for the industrial preparation or manufacture of food or drink, n.e.s. PAC/EU/EC-CO/PE/Annex III/en 686

27 Machinery for making pulp of fibrous cellulosic material (excl. autoclaves, boilers and other heating appliances) Machinery for making paper or paperboard (excl. dryers and other heating appliances, calenders and machinery for making pulp) Machinery for finishing paper or paperboard (excl. calenders) Parts of machinery for making pulp of fibrous cellulosic material, of cast iron or cast steel, n.e.s Parts of machinery for making pulp of fibrous cellulosic material, n.e.s. (excl. of cast iron or cast steel) Parts of machinery for making or finishing paper or paperboard, n.e.s., of cast iron or cast steel Parts of machinery for making or finishing paper or paperboard, n.e.s. (excl. of cast iron or cast steel) Folding machines for bookbinding Collating machines and gathering machines for bookbinding Sewing, wire stitching and stapling machines, incl. book-sewing machines, for bookbinding Unsewn (perfect) binding machines Bookbinding machinery (excl. machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing, folding machines, collating machines, gathering machines, sewing, wire stitching and stapling machines and unsewn binding machines) Parts of bookbinding machinery, n.e.s Combined reel slitting and re-reeling machines, for making up paper pulp, paper or paperboard PAC/EU/EC-CO/PE/Annex III/en 687

28 Slitting and cross cutting machines, for making up paper pulp, paper or paperboard (excl. combined reel slitting and re-reeling machines) Guillotines for paper or paperboard Three-knife trimmers for paper or paperboard Cutting machines for paper or paperboard (other than bookbinding machinery of heading 8440, combined reel slitting and re-reeling machines, other slitting and cross-cutting machines, guillotines and three-knife trimmers) Machines for making bags, sacks or envelopes out of paper pulp, paper or paperboard (excl. sewing machines and eyeletting machines) Machines for making cartons, boxes, cases, tubes, drums or similar containers (other than by moulding) out of paper pulp, paper or paperboard (excl. drying equipment and sewing machines) Machines for moulding articles in paper pulp, paper or paperboard (excl. drying equipment) Machinery for making up paper pulp, paper or paperboard, n.e.s Parts of cutting machines for making up paper pulp, paper or paperboard, n.e.s Parts of machinery for making up paper pulp, paper or paperboard, n.e.s Phototypesetting and composing machines (excl. general purpose automatic data-processing machines also used for phototypesetting) Machinery for type founding and typesetting (combined), e.g. linotypes, monotypes and intertypes Machinery, apparatus and equipment for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components (excl. machine tools of heading 8456 to 8465 and machinery for type founding and typesetting) PAC/EU/EC-CO/PE/Annex III/en 688

29 Parts of machinery, apparatus and equipment for preparing or making printing blocks, plates, cylinders or other printing components, n.e.s Plates, cylinders and other printing components, with printing image, for relief printing Plates, cylinders, lithographic stones and other printing components, with printing image, for planographic printing Plates, cylinders and other printing components, with printing image, for gravure printing Lithographic stones, plates and cylinders, without printing image, but prepared for printing purposes, e.g. planed, grained or polished Offset printing machinery, reel fed Offset printing machinery, sheet fed (office type), using sheets of a side <= 22 x 36 cm in the unfolded state Offset printing machinery, sheet fed, used, taking sheets of a size > 22 x 36 cm Offset printing machinery, sheet fed, new, taking sheets of a size <= 52 x 74 cm but > 22 x 36 cm Offset printing machinery, sheet fed, new, taking sheets of a size > 52 x 74 cm but <= 74 x 107 cm Offset printing machinery, sheet fed, new, taking sheets of a size > 74 x 107 cm Offset printing machinery (excl. machinery for sheets or webs of paper) Letterpress printing machinery, reel fed (excl. flexographic printing machinery) Letterpress printing machinery (excl. flexographic printing and reel fed machinery) Flexographic printing machinery PAC/EU/EC-CO/PE/Annex III/en 689

30 Gravure printing machinery Printing machinery for printing textile materials (excl. offset, flexographic, letterpress and gravure printing machinery) Printing machinery for use in the production of semiconductors Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excl. machinery for printing textile materials, those for use in the production of semiconductors, ink jet printing machines, hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472 and offset, flexographic, letterpress and gravure printing machinery) Machines performing the functions of copying and facsimile transmission, whether or not with a printing function, with a copying speed <= 12 monochrome pages/minute, capable of connecting to an automatic data processing machine or to a network Machines which perform at least one of the functions of printing or facsimile transmission in addition to the function of copying by scanning the original and printing the copies by means of an electrostatic print engine, capable of connecting to an automatic data processing machine or to a network (excl. those performing the functions of copying and facsimile transmission with a copying speed <= 12 monochrome pages/minute) Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network (excl. those performing the functions of copying and facsimile transmission with a copying speed <= 12 monochrome pages/minute and those performing the function of copying by scanning the original and printing the copies by means of an electrostatic print engine) Printers capable of connecting to an automatic data processing machine or to a network Facsimile machines capable of connecting to an automatic data processing machine or to a network PAC/EU/EC-CO/PE/Annex III/en 690

31 Machines only performing a copying function by scanning the original and printing the copies by means of an electrostatic print engine capable of connecting to an automatic data processing machine or to a network Machines only performing a copying function incorporating an optical system capable of connecting to an automatic data processing machine or to a network (excl. those performing a copying function by scanning the original and printing the copies by means of an electrostatic print) Machines only performing a copying function incorporating a non-optical system capable of connecting to an automatic data processing machine or to a network Machines performing only a copying function by scanning the original and printing the copies by means of an electrostatic print engine (excl. those capable of connecting to an automatic data processing machine or to a network) Machines only performing a copying function incorporating an optical system (excl. capable of connecting to an automatic data processing machine or to a network and those performing a copying function by scanning the original and printing the copies by means of an electrostatic print) Machines only performing a copying function incorporating a non-optical system (excl. capable of connecting to an automatic data processing machine or to a network) Printers and facsimile machines (excl. those capable of connecting to an automatic data processing machine or to a network) 6 0 2, , Parts and accessories of printing machinery for use in the production of semiconductors, n.e.s Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442, of cast iron or cast steel, n.e.s. (excl. of printing machinery for use in the production of semiconductors) PAC/EU/EC-CO/PE/Annex III/en 691