Gallery of Charts Created by XLRotor
|
|
- Reynard Cross
- 5 years ago
- Views:
Transcription
1 Gallery of Charts Created by XLRotor What follows are samples of the charts created automatically by XLRotor. The formats for each chart are copied from templates in a file named XLRGRPH.XLS located in the XLRotor program folder. You are can modify the formats of the template charts any way you wish. Model Geometry Chart Integral Turbine Generator Example Analysis 1 Multi-Layered Rotor, Multi-Level Model 7.5 Shaft Radius, in Axial Location, in Ph & Fx: Page 1 of 23
2 After using a menu command to display material properties. A tool tip shows the properties when the mouse is over an element. Integral Turbine Generator Example Analysis 1 Multi-Layered Rotor, Multi-Level Model 7.5 Shaft Radius, in Axial Location, in Ph & Fx: Page 2 of 23
3 Undamped Critical Speed Map (USC) 1 Undamped Critical Speed Map Critical Speed, cpm Bearing Stiffness, lb/in After using a menu command to overlay the bearing stiffness values. 1 Undamped Critical Speed Map Critical Speed, cpm Kxx Kyy Bearing Stiffness, lb/in Ph & Fx: Page 3 of 23
4 Damped Natural Frequency Map Rotordynamic Damped Natural Frequency Map Natural Frequency, cpm Rotor Speed, rpm After using menu commands to add a synchronous line and damping ratios. Rotordynamic Damped Natural Frequency Map Natural Frequency, cpm Rotor Speed, rpm Ph & Fx: Page 4 of 23
5 Damping Factor Map Log Decrement Rotordynamic Damping Factor Map Rotor Speed, rpm After using a menu command to convert Log Dec to Damping Ratio. Rotordynamic Damping Factor Map 1.2 Damping Ratio Rotor Speed, rpm Ph & Fx: Page 5 of 23
6 Root Locus Plot Log Decrement Rotordynamic Root Locus Plot Natural Frequency, cpm Free-Free Natural Frequency Map (Undamped) Natural Frequency, cpm Rotordynamic Free-Free Natural Frequency Map Rotor Speed, rpm Ph & Fx: Page 6 of 23
7 Mode Shape Plots 2 Dimensional Format Damped Eigenvalue Mode Shape Plot Axial Location, in The above 2D mode shapes can be animated with a menu command. Re(x) Im(x) Re(y) Im(y) f= cpm d=1.683 logd N=5 rpm 3 Dimensional Format Damped Eigenvalue Mode Shape Plot forward backward f= cpm d=1.683 logd N=5 rpm The above 3D mode shapes can be animated with a menu command. Ph & Fx: Page 7 of 23
8 Overlaid on Mode Geometry After using a menu command to overlay the model geometry on either the 2D or 3D mode shape plot 12 Sample rotor with 2 disks, one midspan, one overhung Shaft Radius, inches f= cpm d=1.683 logd N=5 rpm Axial Location, inches Ph & Fx: Page 8 of 23
9 Deformed Geometry Animation When the Animate Mode Shape menu command is used on a mode shape overlaid on the model geometry, the entire model geometry is animated. 12 Sample rotor with 2 disks, one midspan, one overhung Shaft Radius, inches f= cpm d=1.683 logd N=5 rpm Axial Location, inches Imbalance Response Displacement Plot Bode Style Response, mils p-p Rotordynamic Response Plot Sta. No. 3: Drive End Bearing Rotor Speed, rpm Major Amp Horz Amp Vert Amp Horz Phs Vert Phs Ph & Fx: Page 9 of 23
10 Polar Style After using a menu command to convert Bode to Polar format Quadrature Component, mils p-p 455 Rotordynamic Response Plot Sta. No. 3: Drive End Bearing In-Phase Com ponent, m ils p-p Horz Vert Animated Orbit Plot After using a menu command to convert the Polar format to an Orbit plot. This plot shows the shaft orbit at one speed. The speed can be changed using the scrollbar. Dragging the scrollbar animates the runup/rundown. Ph & Fx: Page 1 of 23
11 With Labeled Peaks After using a menu command to label a critical speed and show the maximum continuous operating speed (MCOS) Rotordynamic Response Plot Sta. No. 3: Drive End Bearing A.F.=22.69 S.M.=42.5% 46 rpm Response, mils p-p MCOS Major Amp Horz Amp Vert Amp Rotor Speed, rpm Imbalance Response Bearing Load Plot Rotordynam ic Bearing Load Plot 12 Brg at Stn 15: 3 Lobe sleeve bearing Bearing Load, lb pk Max Load Horz Load Vert Load Rotor Speed, rpm Ph & Fx: Page 11 of 23
12 Imbalance Response Operating Deflected Shape Plot Rotordynamic Deflected Shape Plot Response Amplitude, mils pk Deflected Shape at 45 rpm Axial Location, in Major Amp Horz Amp Vert Amp After using a menu command to overlay the deflected shape on the model geometry Shaft Radius, inches Response Amplitude, mils pk Axial Location, inches -2.5 Ph & Fx: Page 12 of 23
13 Static Deflection Analysis to Misaligned Bearing 25 Static Deflection of Vertical Offset of #4 N=36 rpm no offset 1 mil offset 15 Shaft Radius, inches Response Amplitude, mils pk Axial Location, inches Transient Response Plots Time History Plot of Displacement Displacement Transient Response Displacement, mm Turbocharger rotor w ith floating ring bearings Transient analysis w ith imbalance and static load Stn (1): compressor end Time, sec D(1)x D(1)y Ph & Fx: Page 13 of 23
14 Orbit Plot After using a menu command to convert the time history plot to an orbit plot Displacement Transient Response Turbocharger rotor w ith floating ring bearings Transient analysis w ith imbalance and static load Stn (1): compressor end D(1)y, mm D(1)x -.5 D(1)x, m m Frequency Spectrum After using a menu command to convert the time history plot to a frequency spectrum..25 Displacement Transient Response Turbocharger rotor w ith floating ring bearings Transient analysis w ith imbalance and static load Stn (1): compressor end.2 Displacement, mm D(1)x D(1)y Frequency, Hz Ph & Fx: Page 14 of 23
15 Velocity Plot.3 Velocity Transient Response Transient response w ith SFD, gravity and imbalance Nonlinear Transient Analysis of Large Rotordynamic Systems Stn (3): station 3.2 Velocity, m/s V(3)x V(3)y Time, sec Acceleration Plot 25 Acceleration Transient Response Transient response w ith SFD, gravity and imbalance Nonlinear Transient Analysis of Large Rotordynamic Systems Stn (3): station 3 Acceleration, m/s A(3)x A(3)y -2 Time, sec Ph & Fx: Page 15 of 23
16 Internal Shaft Load Plot Plots of both shear load and/or bending moment can be generated Shaft Load Transient Response Transient response w ith SFD, gravity and imbalance Nonlinear Transient Analysis of Large Rotordynamic Systems Stn (3): Shear in station 3 Load, N SL(3)x SL(3)y Time, sec Shear and Bending Moment Diagrams 1 Cross Sectional Shear vx_r vx_i vy_r vy_i Bending Moment mx_r mx_i my_r my_i Ph & Fx: Page 16 of 23
17 Torsional Model Geometry 8 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= 6 Shaft Radius, in Axial Location, in Torsional Interference Diagram (Campbell) Frequency, cpm Torsional Interference Diagram Oil Company 35 hp Motor/Gbox/Centrifugal Compressor 1788/4793 rpm, Coupling retrofit study, Falk 45G1, Kt= Engine Speed, rpm Order 1. Order 2. Order 6. Order 12. Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Ph & Fx: Page 17 of 23
18 Torsional Mode Shape Chart 2D Dimensional Format Torsion Mode Shape Plot 15 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= cpm Axial Location, in The above chart can be animated by with the Animate Mode Shape menu command. The above chart can also contain multiple mode shapes. Overlaid on Model Geometry After using a menu command to overlay the model geometry on the mode shape. 8 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= Shaft Radius, in cpm Axial Location, in Ph & Fx: Page 18 of 23
19 3D Animation The Animate Mode Shape menu command can also be used to produce a 3D animation of a torsional mode shape. The left scroll bars plays the animation. The bottom scroll bar pivots the display about the y axis. The right scroll bar pivots the display about the x axis. Torsional 3D Mode Shape Animation Done Ph & Fx: Page 19 of 23
20 Linear Torsional Response to Engine Orders Shaft Twist Response Both relative and absolute angles can be output. Torsion Amplitude, degrees Torsional Response Plot 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= Stn (99-12): Tw ist in high speed coupling Engine Speed, rpm Coupling Load Torque Response Moment, in-lb Torsional Load Response Plot 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= Stn ( ): Coupling Load betw een Stns: 116 and Engine Speed, rpm Ph & Fx: Page 2 of 23
21 Shaft Torque Response 14 Torsional Load Response Plot 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= Stn (85): Pump shaft torque Moment, in-lb Engine Speed, rpm Operating Deflected Shape All harmonics are summed and displayed as absolute values..14 Torsional Deflected Shape 4x6x9" 12-Stage Pump, 57 rpm Natural Frequencies and Mode Shapes, Impeller Fluid Ip= Engine Speed = 57 rpm Torsion Amplitude, degrees Axial Location, in Ph & Fx: Page 21 of 23
22 Torsional Transient Response Plots Shaft Twist. Displacement Transient Response.2 Five inertia example from book by Lalanne and Ferraris, pg 211 Transient response to startup and short circuit torques Stn (1-2): Relative tw ist in station 1 Displacement, radians D(1-2)ax -.2 Time, sec Shaft Angular Velocity This sample plot shows the machine train accelerating up to rated speed. Velocity, rad/s Velocity Transient Response 3 Inertia Example Torsional Analysis, Vance pg 151 Natural Frequencies and Mode Shapes & Transient Response Stn (1): Motor angular velocity Time, sec V(1)ax Ph & Fx: Page 22 of 23
23 Coupling Load Torque This plot show the torque transmitted in a coupling Coupling Load Transient Response 3 Inertia Example Torsional Analysis, Vance pg 151 Natural Frequencies and Mode Shapes & Transient Response Stn (1-2): Coupling Load betw een Stns: 1 and 2 Coupling Load, in-lb B(1-2)ax -15 Time, sec Applied Nonlinear Torques This example plot shows two nonlinear load components which are being applied at the same station. One is the nominal motor drive torque, the other is a pulsating component of motor torque due to slippage. 8 Applied Nonlinear Load 3 Inertia Example Torsional Analysis, Vance pg 151 Natural Frequencies and Mode Shapes & Transient Response Stn (1): motor drive torque, curve fit of manufacturer's T/N data 6 Applied Load, in-lb nll(1)ax nll(1)ax -4 Time, sec Ph & Fx: Page 23 of 23
ROTATING MACHINERY DYNAMICS
Pepperdam Industrial Park Phone 800-343-0803 7261 Investment Drive Fax 843-552-4790 N. Charleston, SC 29418 www.wheeler-ind.com ROTATING MACHINERY DYNAMICS SOFTWARE MODULE LIST Fluid Film Bearings Featuring
More informationCRITICAL SPEED ANALYSIS FOR DUAL ROTOR SYSTEM USING FINITE ELEMENT METHOD
CRITICAL SPEED ANALYSIS FOR DUAL ROTOR SYSTEM USING FINITE ELEMENT METHOD Kai Sun, Zhao Wan, Huiying Song, Shaohui Wang AVIC Commercial Aircraft Engine Co. Ltd, 3998 South Lianhua Road, 201108 Shanghai,
More informationCONTENTS. 5 BALANCING OF MACHINERY Scope Introduction Balancing Machines Balancing Procedures
CONTENTS 1 OVERVIEW.....................................................................1-1 1.1 Introduction.................................................................1-1 1.2 Organization.................................................................1-1
More information0 INTRODUCTION TO FLUID FILM BEARINGS AND SEALS
Notes 0 INTRODUCTION TO FLUID FILM BEARINGS AND SEALS A turbomachinery is a rotating structure where the load and/or the driver handle a process fluid from which power is extracted or delivered to. Examples
More informationImprovements for Ver November 23, 2017
Dyrobes Rotordynamics Software dyrobes.com Improvements for Ver 20.00 November 23, 2017 Add new features in BePerf for fixed-lobe and tilting pad journal bearing design: 1) Parametric study 2) Design Comparison.
More informationEvaluating and Correcting Subsynchronous Vibration in Vertical Pumps
Dyrobes Rotordynamics Software https://dyrobes.com Evaluating and Correcting Subsynchronous Vibration in Vertical Pumps Abstract By Malcolm E. Leader, P.E. Applied Machinery Dynamics Co. Kelly J. Conner
More informationXLTRC 2 TURBOMACHINERY RESEARCH CONSORTIUM ROTORDYNAMICS SOFTWARE SUITE
XLTRC 2 TURBOMACHINERY RESEARCH CONSORTIUM ROTORDYNAMICS SOFTWARE SUITE WHAT IS XLTRC2? XLTRC2 is a suite of very fast, accurate and experimentally verified, and user- friendly codes for executing a complete
More informationDyrobes Rotordynamics Software
Dyrobes Rotordynamics Software https://dyrobes.com PRACTICAL IMPLEMENTATION OF TORSIONAL ANALYSIS AND FIELD MEASUREMENT Malcolm E. Leader, P.E. Applied Machinery Dynamics Co. P.O. BOX 157 Dickinson, TX
More informationSOME INTERESTING ESTING FEATURES OF TURBOCHARGER ROTOR DYNAMICS
Colloquium DYNAMICS OF MACHINES 2013 Prague, February 5 6, 2013 CzechNC 1. I SOME INTERESTING ESTING FEATURES OF TURBOCHARGER ROTOR DYNAMICS Jiří Šimek Abstract: Turbochargers for combustion engines are
More informationIntroduction to rotordynamics and lubricated elements
August 2016 Introduction to rotordynamics and lubricated elements Dr. Luis San Andres Mast-Childs Chair Professor Turbomachinery Laboratory Texas A&M University Lsanandres@tamu.edu 1 Turbomachinery A turbomachinery
More informationUNIT-3 PART-A C.K.GOPALAKRISHNAN, AP/MECH, MAHALAKSHMI ENGINEERING COLLEGE, TRICHY
UNIT-3 PART-A 1. List the loads normally acting on a shaft? Bending load Torsional load or tw isting load. Axial thrust. 2. Write dow n the expression for the power transmitted by a shaft. P=2π NT/60 Where
More informationReduction of Self Induced Vibration in Rotary Stirling Cycle Coolers
Reduction of Self Induced Vibration in Rotary Stirling Cycle Coolers U. Bin-Nun FLIR Systems Inc. Boston, MA 01862 ABSTRACT Cryocooler self induced vibration is a major consideration in the design of IR
More informationA SOLUTION TO YEARS OF HIGH VIBRATION PROBLEMS IN THREE REINJECTION COMPRESSOR TRAINS RUNNING AT 33 MPa DISCHARGE PRESSURE. Jong Kim, PhD/Presenter
A SOLUTION TO YEARS OF HIGH VIBRATION PROBLEMS IN THREE REINJECTION COMPRESSOR TRAINS RUNNING AT 33 MPa DISCHARGE PRESSURE Jong Kim, PhD/Presenter Authors Jong Kim, PhD Senior Principal Engineer, Waukesha
More informationStructural and Rotordynamic Force Coefficients of a Shimmed Bump Foil Bearing: an Assessment of a Simple Engineering Practice
Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, 2015, Montreal, Canada Paper GT2015-43734 Structural and Rotordynamic Force Coefficients of a Shimmed Bump
More informationDYNAMIC ANALYSIS OF A TURBOCHARGER IN FLOATING BUSHING BEARINGS
Dyrobes Rotoynamics Software https://dyrobes.com ISCORMA-3, Cleveland, Ohio, 19-23 September 2005 DYNAMIC ANALYSIS OF A TURBOCHARGER IN FLOATING BUSHING BEARINGS Edgar J. Gunter RODYN VIBRATION ANALYSIS,
More informationINTRODUCTION SBPT DIAPHRAGM COUPLING: FEATURES APPLICATION
INTRODUCTION SBPT is an ISO 9001: 2000 certified company, specializing in Design and Manufactures of highly flexible Diaphragm Coupling since 1994. Advance analysis and manufacturing process have produced
More informationCase Study #8. 26 th Texas A&M International Pump Users Symposium March, Malcolm E. Leader Kelly J Conner Jamie D. Lucas
Evaluating and Correcting Subsynchronous Vibration In Vertical Pumps Case Study #8 26 th Texas A&M International Pump Users Symposium March, 2010 Malcolm E. Leader Kelly J Conner Jamie D. Lucas Case Study
More information2. Write the expression for estimation of the natural frequency of free torsional vibration of a shaft. (N/D 15)
ME 6505 DYNAMICS OF MACHINES Fifth Semester Mechanical Engineering (Regulations 2013) Unit III PART A 1. Write the mathematical expression for a free vibration system with viscous damping. (N/D 15) Viscous
More informationTLC. T Series Couplings. Product Description. Design Features
TLC A Stainless Steel, Flexible Membranes B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft
More informationAPPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE
Colloquium DYNAMICS OF MACHINES 2012 Prague, February 7 8, 2011 CzechNC APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE Jiří Šimek Abstract: New type of aerodynamic
More informationEFFECT OFSHIMMING ON THE ROTORDYNAMIC FORCE COEFFICIENTS OF A BUMP TYPE FOIL BEARING TRC-B&C
TRC Project 32513/1519F3 EFFECT OFSHIMMING ON THE ROTORDYNAMIC FORCE COEFFICIENTS OF A BUMP TYPE FOIL BEARING TRC-B&C-01-2014 A Shimmed Bump Foil Bearing: Measurements of Drag Torque, Lift Off Speed, and
More informationCHAPTER 1 BALANCING BALANCING OF ROTATING MASSES
CHAPTER 1 BALANCING Dynamics of Machinery ( 2161901) 1. Attempt the following questions. I. Need of balancing II. Primary unbalanced force in reciprocating engine. III. Explain clearly the terms static
More informationPRACTICAL IMPLEMENTATION OF TORSIONAL ANALYSIS
Dyrobes Rotordynamics Software http://dyrobes.com PRACTICAL IMPLEMENTATION OF TORSIONAL ANALYSIS Malcolm E. Leader, P.E. Applied Machinery Dynamics Co. P.O. BOX 157 Dickinson, TX 77539 MLeader@RotorBearingDynamics.COM
More informationTYPE HSRE/HLRE/HTRE H SERIES HIGH PERFORMANCE COUPLINGS
A High Strength Stainless Steel Flexible Membranes B Overload Collars C Trim Balance Holes D Shrouded Bolts A C B D Product Description John Crane s Metastream HSRE/HLRE/HTRE reduced moment couplings use
More informationRoot Cause Analysis of a vibration problem in a propylene turbo compressor. Pieter van Beek, Jan Smeulers
Root Cause Analysis of a vibration problem in a propylene turbo compressor Pieter van Beek, Jan Smeulers Problem description A newly installed turbo compressor system for propylene showed vibrations in
More informationMagnetic Bearings for Supercritical CO2 Turbomachinery
The 6 th International Supercritical CO 2 Power Cycles Symposium March 27-29, 2018, Pittsburgh, Pennsylvania Magnetic Bearings for Supercritical CO2 Turbomachinery Richard Shultz Chief Engineer Waukesha
More informationTransient Speed Vibration Analysis Insights into Machinery Behavior
75 Laurel Street Carbondale, PA 18407 Tel. (570) 282-4947 Cell (570) 575-9252 Transient Speed Vibration Analysis Insights into Machinery Behavior 07-Dec Dec-2007 By: Stan Bognatz, P.E. President & Principal
More informationTEST METHODS CONCERNING TRANSPORT EQUIPMENT
PART IV TEST METHODS CONCERNING TRANSPORT EQUIPMENT - 403 - CONTENTS OF PART IV Section Page 40. INTRODUCTION TO PART IV... 407 40.1 PURPOSE... 407 40.2 SCOPE... 407 41. DYNAMIC LONGITUDINAL IMPACT TEST
More informationCOMPULSATOR ROTORDYNAMICS AND SUSPENSION DESIGN
COMPULSATOR ROTORDYNAMICS AND SUSPENSION DESIGN B. T. Murphy, S. M. Manifold and J. R. Kitzmiller Center For Electromechanics, The University of Texas at Austin, Austin, Texas ABSTRACT High speed compulsator
More informationRotor Dynamics as a Tool for Solving Vibration Problems Malcolm E. Leader, P.E. Applied Machinery Dynamics Company
Rotor Dynamics as a Tool for Solving Vibration Problems Malcolm E. Leader, P.E. Applied Machinery Dynamics Company Introduction This paper continues the series begun in 2001 for the Vibration Institute
More informationAnalysis of Systems with Complex Gears
SIRM 2015 11th International Conference on Vibrations in Rotating Machines, Magdeburg, Germany, 23. 25. February 2015 Analysis of Systems with Complex Gears Frédéric Gaulard 1, Alexander Kosenkov 2, Dr.
More informationTYPE HSFE/HLFE/HTFE H SERIES HIGH PERFORMANCE COUPLINGS
A High Strength Stainless Steel Flexible Membranes B Overload Collars C Flanged Connections D Shrouded bolts B C D A Product Description John Crane s HSFE/HLFE/HTFE s feature a factory assembled transmission
More informationAPPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE
Engineering MECHANICS, Vol. 19, 2012, No. 5, p. 359 368 359 APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE Jiří Šimek* New type of aerodynamic tilting pad journal
More informationIDENTIFICATION OF ABNORMAL ROTOR DYNAMIC STIFFNESS USING MEASURED VIBRATION INFORMATION AND ANALYTICAL MODELING
Proceedings of PWR2009 ASME Power July 21-23, 2009, Albuquerque, New Mexico, USA Power2009-81019 IDENTIFICATION OF ABNORMAL ROTOR DYNAMIC STIFFNESS USING MEASURED VIBRATION INFORMATION AND ANALYTICAL MODELING
More informationGearbox Misalignment on Combustion Gas Turbine Generator
Gearbox Misalignment on Combustion Gas Turbine Generator Mohammed Al-Hajri Abqaiq Plants-Saudi Aramco Copyright 2011, Saudi Aramco. All rights reserved. Objective To share with you Abqaiq Plants successful
More informationP734H - Technical Data Sheet
P734H - Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBalancing with the presence of a rub
Balancing with the presence of a rub Nicolas Péton 1 1 GE Measurement & Control, 14 rue de la Haltinière, CS 10356, 44303 Nantes, Cedex 3, France Abstract During commissioning of a cogeneration plant the
More information11 Problems 11 Solutions Case Histories of 11 Machinery Vibration Problems Part 2
11 Problems 11 Solutions Case Histories of 11 Machinery Vibration Problems Part Kevin R. Guy, Delaware Analysis Services, Inc., Francisco, Indiana This two-part article covers a series of eleven machinery
More informationTYPE TSC/TLC T SERIES FLEXIBLE DISC COUPLINGS
TYPE TSC/TLC A Stainless steel flexible discs B Overload collars C Cartridge transmission unit D Anti-fly feature E Anti-corrosion treatment F Hubs with API puller holes G Robust hub bolt H Large shaft
More informationIJTC STABILITY ANALYSIS OF A HIGH SPEED AUTOMOTIVE TURBOCHARGER. Dyrobes Rotordynamics Software
Dyrobes Rotordynamics Software http://dyrobes.com Proceedings of IJTC26 STLE/ASME international Joint Tribology Conference October 22-25, 26, San Antonio, TX, USA STABILITY ANALYSIS OF A HIGH SPEED AUTOMOTIVE
More informationISCORMA-3, Cleveland, Ohio, September 2005
Dyrobes Rotordynamics Software https://dyrobes.com ISCORMA-3, Cleveland, Ohio, 19-23 September 2005 APPLICATION OF ROTOR DYNAMIC ANALYSIS FOR EVALUATION OF SYNCHRONOUS SPEED INSTABILITY AND AMPLITUDE HYSTERESIS
More informationRiverhawk Company 215 Clinton Road New Hartford NY (315) Free-Flex Flexural Pivot Engineering Data
Riverhawk Company 215 Clinton Road New Hartford NY (315)768-4937 Free-Flex Flexural Pivot Engineering Data PREFACE Patented Flexural Pivot A unique bearing concept for applications with limited angular
More informationUSING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
More informationPNEUMATIC HIGH SPEED SPINDLE WITH AIR BEARINGS
PNEUMATIC HIGH SPEED SPINDLE WITH AIR BEARINGS Terenziano RAPARELLI, Federico COLOMBO and Rodrigo VILLAVICENCIO Department of Mechanics, Politecnico di Torino Corso Duca degli Abruzzi 24, Torino, 10129
More informationROTOR DROP TRANSIENT ANALYSIS OF AMB MACHINERY
Proceedings of IDETC/CIE 2005 ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference September 24-28, 2005, Long Beach, California, USA ROTOR
More informationB.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY
1 B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY (Mechanical Engineering) Time: 3 hours Max. Marks: 70 Answer any FIVE questions All questions
More informationMEASUREMENTS OF ROTORDYNAMIC ROTOR SUPPORTED ON METAL MESH
ASME Turbo Expo 213 GT213 June 3-7, 213, San Antonio, Texas, USA MEASUREMENTS OF ROTORDYNAMIC RESPONSE AND TEMPERATURES IN A ROTOR SUPPORTED ON METAL MESH FOIL BEARINGS Thomas Chirathadam Southwest Research
More informationROTORDYNAMICS OF SEMI-RIGID AND OVERHUNG TURBOMACHINERY
ROTORDYNAMICS OF SEMI-RIGID AND OVERHUNG TURBOMACHINERY Malcolm E. Leader, P.E. Applied Machinery Dynamics Co. P.O. BOX 157 Dickinson, TX 77539 MLeader@RotorBearingDynamics.COM Abstract: This paper continues
More informationApplication Notes. Calculating Mechanical Power Requirements. P rot = T x W
Application Notes Motor Calculations Calculating Mechanical Power Requirements Torque - Speed Curves Numerical Calculation Sample Calculation Thermal Calculations Motor Data Sheet Analysis Search Site
More informationDriven Damped Harmonic Oscillations
Driven Damped Harmonic Oscillations Page 1 of 8 EQUIPMENT Driven Damped Harmonic Oscillations 2 Rotary Motion Sensors CI-6538 1 Mechanical Oscillator/Driver ME-8750 1 Chaos Accessory CI-6689A 1 Large Rod
More information11 Problems 11 Solutions Case Histories of 11 Machinery Vibration Problems Part 1
11 Problems 11 Solutions Case Histories of 11 Machinery Vibration Problems Part 1 Kevin R. Guy, Delaware Analysis Services, Inc., Francisco, Indiana This two-part article covers a series of eleven machinery
More informationDETERMINING THE ROOT CAUSES OF SUBSYNCHRONOUS INSTABILITY PROBLEMS IN TWO CENTRIFUGAL COMPRESSORS
DETERMINING THE ROOT CAUSES OF SUBSYNCHRONOUS INSTABILITY PROBLEMS IN TWO CENTRIFUGAL COMPRESSORS by Ed Wilcox CVO Rotating Equipment Team Lead Lyondell/Equistar Channelview, Texas and David P. O Brien
More informationVALDYN 1-D Crankshaft modelling
VALDYN 1-D Crankshaft modelling Tutorial www.ricardo.com 2 Contents Introduction Crankshaft torsional (1-D) modelling Crankshaft torsional analysis Crankshaft data Build model Define output plots Define
More informationTime Transient Analysis and Non-Linear Rotordynamics
Dyrobes Rotordynamics Software http://dyrobes.com Time Transient Analysis and Non-Linear Rotordynamics Malcolm E. Leader, P.E. Applied Machinery Dynamics Co. P.O. BOX 157 Dickinson, TX 77539 MLeader@RotorBearingDynamics.COM
More informationR10 Set No: 1 ''' ' '' '' '' Code No: R31033
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DYNAMICS OF MACHINERY (Common to Mechanical Engineering and Automobile Engineering) Time: 3 Hours Max Marks:
More informationFailure of a Test Rig Operating with Pressurized Gas Bearings: a Lesson on Humility
Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, June 15-19, 2015, Montreal, Canada GT2015-42556 Failure of a Test Rig Operating with Pressurized Gas Bearings: a Lesson
More informationEffects of Large Bending Deflections on Blade Flutter Limits. UpWind Deliverable D2.3. Bjarne Skovmose Kallesøe Morten Hartvig Hansen.
Effects of Large Bending Deflections on Blade Flutter Limits UpWind Deliverable D2.3 Bjarne Skovmose Kallesøe Morten Hartvig Hansen Risø R 1642(EN) Risø National Laboratory for Sustainable Energy Technical
More informationDevelopment and validation of a vibration model for a complete vehicle
Development and validation of a vibration for a complete vehicle J.W.L.H. Maas DCT 27.131 External Traineeship (MW Group) Supervisors: M.Sc. O. Handrick (MW Group) Dipl.-Ing. H. Schneeweiss (MW Group)
More informationCASE STUDY ON RESOLVING OIL WHIRL ISSUES ON GAS COMPRESSOR
CASE STUDY ON RESOLVING OIL WHIRL ISSUES ON GAS COMPRESSOR John J. Yu, Ph.D. Nicolas Péton Sergey Drygin, Ph.D. GE Oil & Gas 1 / Abstract This case is a site vibration issue on a Gas compressor module.
More informationIntroduction to the Influence of Torsional Oscillation of Driving Wheelsets to Wheel/Axle Press-fitted Joint
Introduction to the Influence of Torsional Oscillation of Driving Wheelsets to Wheel/Axle Press-fitted Joint Ing. Miloslav Jára Vedoucí práce: doc. Ing. Josef Kolář, CSc. Abstrakt Příspěvek se zabývá problematikou
More informationEFFECT OF LUBRICANT SUPPLY PRESSURE ON SFD PERFORMANCE: ENDS SEALED WITH O-RINGS & PISTON RINGS
May 2017 Year V EFFECT OF LUBRICANT SUPPLY PRESSURE ON SFD PERFORMANCE: ENDS SEALED WITH O-RINGS & PISTON RINGS TRC-SFD-01-17 Bonjin Koo Leping Yu Graduate Research Assistants Luis San Andrés Mast-Childs
More informationEE 370L Controls Laboratory. Laboratory Exercise #E1 Motor Control
1. Learning Objectives EE 370L Controls Laboratory Laboratory Exercise #E1 Motor Control Department of Electrical and Computer Engineering University of Nevada, at Las Vegas To demonstrate the concept
More informationCaution. Description. Specifications and Ordering Information and Accelerometers
R Specifications and Ordering Information 200350 and Accelerometers Description The 200350 and Accelerometers are general purpose, case-mounted seismic transducers designed for use with Trendmaster Pro
More informationVibration and Stability of 3000-hp, Titanium Chemical Process Blower
International Journal of Rotating Machinery, 9(2): 197 217, 2003 Copyright c 2003 Taylor & Francis 1023-621X/03 $12.00 +.00 DOI: 10.1080/10236210390147407 Vibration and Stability of 3000-hp, Titanium Chemical
More information2. Motion relationships and torques
2. Motion relationships and torques 2.1 Rotation angle of a single joint as a function of defl ection angle ß 1 Input rotation angle 2 Output rotation angle If a single joint is deflected by angle ß and
More informationME scope Application Note 24 Choosing Reference DOFs for a Modal Test
ME scope Application Note 24 Choosing Reference DOFs for a Modal Test The steps in this Application Note can be duplicated using any ME'scope Package that includes the VES-3600 Advanced Signal Processing
More informationIntroduction to Vibration & Pulsation in Reciprocating Compressors
Introduction to Vibration & Pulsation in Reciprocating Compressors Shelley D. Greenfield, P.Eng. Vice President, Design Services sgreenfield@betamachinery.com Luis de la Roche Operations Manager ldelaroche@betamachinery.com
More information- v The Society shall not be responsible for star f, - opinions advanced in papers or
^pc^ntenn/q( y _ P _ > 4. rftr ME^^ s 80-GT-162 AiIW'I 345E - v The Society shall not be responsible for star f, - opinions advanced in papers or ^ _ - THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 47 St.,
More informationTYPE TSC/TLC T SERIES METAL MEMBRANE COUPLINGS
A Stainless Steel Flexible Discs B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft Diameters
More informationTURBOGENERATOR DYNAMIC ANALYSIS TO IDENTIFY CRITICAL SPEED AND VIBRATION SEVERITY
U.P.B. Sci. Bull., Series D, Vol. 77, Iss. 3, 2015 ISSN 1454-2358 TURBOGENERATOR DYNAMIC ANALYSIS TO IDENTIFY CRITICAL SPEED AND VIBRATION SEVERITY Claudiu BISU 1, Florian ISTRATE 2, Marin ANICA 3 Vibration
More informationS5L1D-G4 Wdg Technical Data Sheet
- Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant section of other international standards such as BS5000,
More informationRotational Kinematics and Dynamics Review
Rotational Kinematics and Dynamics Review 1. The Earth takes slightly less than one day to complete one rotation about the axis passing through its poles. The actual time is 8.616 10 4 s. Given this information,
More information200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
More informationMetal Mesh Foil Gas Bearings for Oil-Free Turbomachinery
12 th National Conference on Gas Lubrication, Dry Gas Seal and Micro Gravity in China May 218 Metal Mesh Foil Gas Bearings for Oil-Free Turbomachinery An introduction to Oil-Free MTM requirements and metal
More informationUNDERSTANDING AMPLITUDE AND PHASE IN ROTATING MACHINERY
RD VIBRATION INSTITUTE 33 ANNUAL MEETING, HARRISBURG, PA., JUNE 23-27, 2009 UNDERSTANDING AMPLITUDE AND PHASE IN ROTATING MACHINERY Edgar J. Gunter, Ph.D. Professor Emeritus Department of Mechanical and
More informationPRECISION BELLOWS COUPLINGS
PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering
More informationa. Open the Lab 2 VI file in Labview. Make sure the Graph Type is set to Displacement (one of the 3 tabs in the graphing window).
Lab #2 Free Vibration (Experiment) Name: Date: Section / Group: Part I. Displacement Preliminaries: a. Open the Lab 2 VI file in Labview. Make sure the Graph Type is set to Displacement (one of the 3 tabs
More informationIII B.Tech I Semester Supplementary Examinations, May/June
Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally
More informationCornering & Traction Test Rig MTS Flat-Trac IV CT plus
Testing Facilities Cornering & Traction Test Rig MTS Flat-Trac IV CT plus s steady-state force and moment measurement dynamic force and moment measurement slip angel sweeps tests tractive tests sinusoidal
More informationVibration Diagnostics and Condition Assessment As Economic Tool
IFToMM 7th International Conference on Rotor Dynamics, Vienna, Austria, September 25-28, 2006 Vibration Diagnostics and Condition Assessment As Economic Tool Zlatan Racic D.B.A. Z-R Consulting 5698 South
More informationSCHMIDT-KUPPLUNG GmbH
Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible
More informationA Different Perspective of Synchronous Thermal Instability of Rotating Equipment (STIR) Yve Zhao Staff Machinery Engineer 3/15/2017
A Different Perspective of Synchronous Thermal Instability of Rotating Equipment (STIR) Yve Zhao Staff Machinery Engineer 3/15/2017 Introduction As compression technology development is driven by the market
More informationTutorial: Calculation of two shafts connected by a rolling bearing
Tutorial: Calculation of two shafts connected by a rolling bearing This tutorial shows the usage of MESYS shaft calculation with multiple shafts. The shaft calculation software provides different views
More informationLightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
More informationHow to Select a Variable Frequency Drive Based on Load Characteristics
How to Select a Variable Frequency Drive Based on Load Characteristics by Vishnuvarthanaraj (Vishnu) Balaraj, Software/Hardware Engineer KB Electronics for more information, email: info@kbelectronics.net
More informationMachinery Vibration Limits and Dynamic Structural Response
E:\Marketing Communications\Papers and Presentations\Technical Papers\New Technical Papers\Machinery Vibration Limits#8.doc 1 Machinery Vibration Limits and Dynamic Structural Response By Brian C. Howes,
More informationARMD. Version 5.7 THE COMPLETE SOFTWARE PACKAGE FOR
ARMD TM Version 5.7 THE COMPLETE SOFTWARE PACKAGE FOR Rotor Dynamics Torsional Vibration Fluid-Film Bearings Rolling-Element Bearings Lubricant Analysis RBTS, Inc. Rotor Bearing Technology & Software 1041
More informationModel Library Power Transmission
Model Library Power Transmission The Power Transmission libraries in SimulationX support the efficient modeling and analysis of mechanical powertrains as well as the simulation-based design of controlled
More informationDynamic Responses of Rotor Drops onto Auxiliary Bearing with the Support of Metal Rubber Ring
Send Orders for Reprints to reprints@benthamscience.ae The Open Mechanical Engineering Journal, 215, 9, 157-161 157 Open Access Dynamic Responses of Rotor Drops onto Auxiliary Bearing with the Support
More informationSuspension systems and components
Suspension systems and components 2of 42 Objectives To provide good ride and handling performance vertical compliance providing chassis isolation ensuring that the wheels follow the road profile very little
More informationTorquetronicTM ET TOR_6606_ET_brochure_AW.indd 1 06/06/ :05
TM Torquetronic ET Torquemeters Limited specialise in providing innovative products and custom engineered solutions for high performance rotating machinery applications with a reputation for excellent
More informationA L T R A I N D U S T R I A L M O T I O N. Ameriflex Diaphragm Couplings High Speed, High Performance Design
A L T R A I N D U S T R I A L M O T I O N Ameriflex Diaphragm Couplings High Speed, High Performance Design Diaphragm Couplings Since its introduction in 1971, the Ameriflex multiple convoluted diaphragm
More informationStability Analysis of a Turbocharger for Marine Diesel Engine Service. Master of Science in Mechanical Engineering
Stability Analysis of a Turbocharger for Marine Diesel Engine Service by Michael S. Adams Thesis submitted to the Faculty of the Virginia Polytechnic Institute and State University in partial fulfillment
More informationON THE DETERMINATION OF BEARING SUPPORT PEDESTAL STIFFNESS USING SHAKER TESTING
ON THE DETERMINATION OF BEARING SUPPORT PEDESTAL STIFFNESS USING SHAKER TESTING R. Subbiah Siemens Energy, Inc., 4400 Alafaya trail, Orlando FL 32817 USA Abstract An approach that enables rotor dynamists
More informationDriven Damped Harmonic Oscillations
Driven Damped Harmonic Oscillations EQUIPMENT INCLUDED: Rotary Motion Sensors CI-6538 1 Mechanical Oscillator/Driver ME-8750 1 Chaos Accessory CI-6689A 1 Large Rod Stand ME-8735 10-cm Long Steel Rods ME-8741
More informationHigh precision dual rubber coupling STEPFLEX STF
High precision dual rubber coupling STEPFLEX STF STEPFLEX High-damping couplings Our newly developed laminated rubber element achieves high damping and low reaction force. Their unitized construction with
More informationBalancing and over-speed testing of flexible rotors
Balancing and over-speed testing of flexible rotors Installations for low- and high-speed balancing and for over-speed testing HS 16 - HS 34 Application Balancing of flexible rotors from turbo-machinery
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14691 First edition 1999-11-01 Petroleum and natural gas industries Flexible couplings for mechanical power transmission General purpose applications Industries du pétrole et
More informationUNIT - III GYROSCOPE
UNIT - III GYROSCOPE Introduction 1When a body moves along a curved path, a force in the direction of centripetal acceleration (centripetal force ) has to be applied externally This external force is known
More information719. Diagnostic research of rotor systems with variable inertia moment
719. Diagnostic research of rotor systems with variable inertia moment Valentinas Kartašovas 1, Vytautas Barzdaitis 2, Pranas Mažeika 3, Marius Vasylius 4 1, 2 Kaunas University of Technology, Mickevičiaus
More information