Soap manufacturing plant specifications

Transcription

1 Soap manufacturing plant specifications liters capacity reactor. With a steam double closed circuit and double open circuit. Random at three levels with speed variation. Temperature and weight sensors liters capacity reactor. Double steam open circuit and double closed circuit. Mixer with speed variation and temperature and weight sensors. 3. Spray dryer. This machine works introducing soap in liquid phase and inside it, the moisture and temperature are removed changing to solid phase. This system allows continuous operation with an average production of 900 kg / h., depending on the used base material. 4. Additives Mixer. 600 liters. With weight sensors. 5. Basic soap, additives and colour and perfums injectors Mixer liters. With weight sensors. 6. SIGMA Linear multi-blades mixer with speed variator and weight sensors. 7. Special vacuum pumps for the transfer of basic ph. 8. Silos with capacity of 15 m3, with weight sensors, pneumatic valves and outputs prepared for screw conveyors. 9. Sleeves filter, with picker of particles and pneumatic divider for use of the product to the production circuit. Sleeve filter with particles collector and pneumatic separator for the use product in the production circuit. 10. Liquids filter. Capacity of 6000 liters. 11. Blade mill 12. Steam boiler. Production capacity: 1100 steam kg / hour liters tank with heating coil and inox conical base liters tank of fiberglass 15. Air compressor, screw system for the production onf 6000 liters/ minute liters heating coil, filters and air dryer. 16. Centrifugal oil machine for washing and separation. 17. Volumetric system packing machine. With different conformers of bags and flat base formers 18. The entire transport system is performed based on screw conveyors. All the machines reflected here are in perfect condition. The building material is inox.

2 Soap cost for grams. (High quality) Complex plastic: 6 /Kg 0 '00006 /g Machinery maintenance: 3 /h 0 ' /g Electricity: 6 /h 0 ' /g Wooden Pallet: 4 (580 Kg/pallet) 0 ' /g Personnel: 10 /h (in bags of 150g) /g Cartons boxes: 0.48 /unit /g Perfume: 15 /L. 0' /g Transport: 0.20 /Kg /g Base to: 0.060/k /g Price of the bag of 150 gm is: (in Malaga, Spain) Interesting Facts & Figures about the plant The most usual maintenance for this plant is the cleaning of the injectors, the obstructions in the output hole/exit of the silos due to the caking causes. Other usual maintenance is the lubrication of the different mechanical elements. The required electrical power for this facility is 90 kw The necessary amount of water to produce 1 Ton of soap powder is 300 lts. The required staff for the production of 70,000 kg / month of soap powder in bags of 150 gr is 5 workers. Reactor fabrication lead-time Manufacturing time for 10,000 kg of soap powder is 6 hours. For litres of liquid soap is 4 hours. For kg. of bar soap is 6 hours. All times these times are only for production, without packaging.

3 Installation dimensions The required space/meters required for the factory and raw materials are 800 m2 with a height of 9 m on the sides of the factory building and 12 m at the top of factory building. It is also necessary to have a exterior courtyard space around 700 m2.

4 Other compatible uses of the plant Base materia for animal feed Following its desing, the plant is also compatible to manufacture calcium soaps, which is the alternative nowadays to replace animal fat by vegetable fat in the manufacture of animal feed. According to several studies, this manufacturing change is been consolidated as the more interesting alternative because it shows that the daily consumption of these type of fats give as results of a better intestinal transit, a better milk and meat. The secondary consequence but not less important, is a fewer use of medicines in the animals, due to the increasing of their biological immunity. This new product is very interesting for animal feed manufacturers, thanks to the melting point that this new fat provides and the stability that it presents to oxidation, extending substantially the expiration date of their products as well as providing the capacity to resist more extreme weather conditions. This change of use is planned that by 2012, all animal feed manufactured or consumed in the EU will have to be produced in their entirety with these type of new fats. From the manufacturing of these fats to the manufacture of finished animal feed exists only a small step, because with some modifications can be manufactured the overall process. Bio-Diesel plant In the previous part to the neutralization of fatty acids with which we will work, there is an area in the process called prewash. This part is composed of a number of elements that will be part for the biodiesel manufacturing plant. This is compatible use for the manufacture of biodiesel from vegetable oils. This is composed of the elements that make the numbers 2, 7, 10, 11 and 15 (this last number is not reflected in the specifications of the plant and consists of a column filter to work under high pressure, up to 5000 litres of capacity.) With the above mentioned components, it is possible to manufacture bio-diesel ant it is also compatible with the manufacturing process, saving the particular regulations in the area where it will be manufactured.

5 Sale General Conditions After the final purchase of the production line, the seller will provide: All technical expertise (Know How) to produce wide range of products. Detailed list of raw materials. Raw material supplier list.