Manufacturing Programme

Transcription

1 Manufacturing Programme Construction industry Concrete release agents Chemo-technical maintenance products Lubricating fluids Plain and roller bearing greases Adhesive lubricants Pastes and grease pastes Application equipment for SYSTEM REINER cartridges One cannot imagine the construction industry without lubricants and release agents. In the diverse areas of application, whether it be in gravel and sand pits, quarries, in road works or in civil and structural engineering, all construction machinery and equipment requires constant care and maintenance. Special lubricants and release agents play a vital role in this as well as the specialist advice. For only top quality lubricants minimize wear and provide for optimum working life of the equipment, at the same time reducing lubricant consumption. The special products made by FUCHS LUBRITECH match these demanding requirements and have proven this world-wide. The high quality of the FUCHS LUBRITECH products is the result of intensive research and development in close cooperation with customers as well as with machinery and plant manufacturers. Thus attention is paid to the ecological integrity of the ingredients used, both in the formulation of new lubricants and the further development of proven products. The FUCHS LUBRITECH quality control system, which is certified in accordance with DIN/ISO 9000, embraces all areas of the company and is an integral part of the operational cycles. As a result we fulfill or exceed the high expectations of our customers in the construction industry worldwide.

2 Temperature range in C Available as spray Concrete release agents BETONEX GRÜN 1519 Biogeneous maintenance fluid for mixers, construction machinery and equipment BETONEX SP Highly efficient maintenance fluid for ready-mixed concrete vehicles, concrete pumps etc. BETONEX SP High performance maintenance fluid for mixers, concrete pumps and equipment BITEEREX Bitumen release agent BITEEREX Bitumen release agent concentrate BITEEREX GRÜN 1090 Biogeneous bitumen release agent concentrate SOK up to +100 Hot-release agent for the production of exposed concrete in precast concrete plants SOK up to +100 Hot-release agent for the production of exposed concrete in precast concrete plants SOK AQUA 3308 Release agent emulsion for precast concrete plants SOK BTM E 2477 former Betontrennmittel E Universal release agent for building construction SOK FACTORY 2471 up to +50 Release agent for high-quality concrete surfaces in building construction, also recommended as mixer protection SOK PERFEKT 1089 up to +50 Release agent for high-quality concrete surfaces in building construction SOK STANDARD 1052 up to +100 Release agent for high-quality concrete surfaces in building construction, also recommended as mixer protection SOK ULTRA 1031 up to +130 Hot-release agent for the production of exposed concrete in precast concrete plants SOK WAX 1 / 2 / 3 up to +50 Pasty release agent for special applications Chemo-technical maintenance products CTP B-FE 2105 former BETONLÖSER FE Acidic cleaning agent for removing concrete and mortar residues CTP D ECO 2447 former DECORDYN ECO Rapidly biodegradable corrosion protection concentrate CTP D-HF former DECORDYN HF 91 Universal corrosion protection wax for external conservation CTP D-W 2310 former DECORDYN W Conservation fluid CTP M 5080 former METABLANC Metal rapid cleaner, e.g. for cleaning of brakes CTP M ECO 1836 former METABLANC ECO universal cleaner, made of rapidly degradable resources CTP M-W 2119 former METABLANC W Sprayable cleaner for motor vehicles

3 viscosity at 40 C [mm 2 /s] Temperature range in C Solid lubricant Available as spray Lubricating fluids CEDRACON CEDRACON K CEDRACON S 3 ECO-HYD S-range FERROFORM 3 R FERROFORM ECO LOCC FERROFORM LOCC GEARMASTER CLP-range Mineral oil -35 / +65 Graphite Wire rope and conservation fluid with graphite 1333 Mineral oil -30 / +70 Wire rope and conservation fluid with solvent 1310 Mineral oil -40 / +80 Graphite lubricant for wire rope conservation, with solvent synthetic -30 / +150 Rapidly biodegradable hydraulic oils, based on synthetic ester, HLP-E Mineral oil Graphite Rust loosener with graphite 1443 synthetic Biodgradable rust loosener based on synthetic fluids 1830 Mineral oil Mineral oil based rust loosener Mineral oil -15 / +120 Mineral-oil based high performance gear oils, CLP GEARMASTER CLPF-range Mineral oil -5 / +120 MoS 2 High performance gear oils containing MoS 2 GEARMASTER ECO-range synthetic -30 / +150 high performance gear oils, based on synthetic ester, CLP-E GEARMASTER PGP-range Polyglycol -20 / +150 High performance gear oils, based on polyglycols, CLP-PG GEARMASTER SYN-range PAO -20 / +150 High performance gear oils on PAO base, CLP-HC GERALYN FLUID White oil -20 / +120 Food grade lubricating fluid, water resistant, odourless, tasteless KOMPRANOL Mineral oil -40 / +80 Air tool oil (conservation/lubrication) KOMPRANOL GRÜN synthetic -60 / +90 Biodegradable air tool oil KOMPRANOL PF synthetic -60 / +90 former DRUCKLUFTÖL PF 84 Synthetic air tool oil with corrosion and wear protection additives STABYLAN semi-synthetic -15 / +150 Semi-synthetic chain lubricant STABYLAN synthetic bis +220 Fully synthetic, high-temperature chain lubricant STABYLAN ECO W synthetic -30 / +110 Biodegradable synthetic oil with white solid lubricants for levers, joints and chains STABYLAN SI Silicone oil bis +250 Silicone lubricant, e.g. for lubrication of screeds on road pavers; cockpit spray STABYLAN SI Silicone oil -40 / +200 High viscous silicone oil based lubricating, release and maintenance fluid

4 Classification NLGI-grade Thickener Temperature range in C viscosity at 40 C [mm 2 /s] Solid lubricant Available as spray Plain and roller bearing greases GEARMASTER LI Li-X semi-synthetic -30 / GP00N-30 Semi-synthetic fluid grease GEARMASTER ZSA Lithium Mineral oil -40 / GP000K-40 Smooth lithium soap-based fluid grease GERALYN 00 / 1 / 2 00, 1 and 2 Al-X White oil -20 / white GF00G-20 / KF1K-20 / KF2K-20 Food grade grease, NSF-H1 registered GERALYN P1 / P2 0/1 and 2 inorganic synthetic -30 / / 440 white KF1P-30 / KF2P-30 Fully synthetic food grade grease LAGERMEISTER 3000 PLUS Calcium semi-synthetic -30 / KP2K-30 High performance EP-longlife grease, calcium-soap based, salt water resistant LAGERMEISTER BF 1 / BF 2 1 and 2 Lithium Mineral oil -20 / KP1K-20 / KP2K-20 Lithium-soap based EP longlife grease LAGERMEISTER CA 95/100 N Calcium Mineral oil -30 / Graphite former CEDRACON 95/100 N MF2C-30 Water resistant lubricating grease with graphite, calcium-soap based, for underwater applications LAGERMEISTER CX-EP Ca-X Mineral oil -30 / KP2N-30 Calcium complex-soap based lubricating grease LAGERMEISTER ECO Calcium native -15 / white KPF2E-15 EP multi-purpose grease LAGERMEISTER EP Lithium Mineral oil -20 / KP2K-20 Lithium-soap based EP longlife grease LAGERMEISTER HDG 00/HDG 2 00 and 2 Ca-X Mineral oil -20 / white K/GPF00K-30 / KPF2K-20 High performance grease with white solid lubricants; HDG 00 for crusher spider bearings LAGERMEISTER LX-EP Li-X Mineral oil -30 / KP2P-30 Lithium complex-soap grease, mineral oil based LAGERMEISTER SL /3 Lithium Mineral oil -20 / K2K-20 Lithium-soap based EP multi-purpose grease LAGERMEISTER SLG Lithium Mineral oil -30 / Graphite KF2K-30 Lithium-soap based EP multi-purpose grease with graphite LAGERMEISTER TS Lithium semi-synthetic -30 / KP2N-30 Semi-synthetic high performance grease for anti-friction bearings LAGERMEISTER WHS /2 Lithium Mineral oil -20 / white KPF2K-20 High-performance grease with white solid lubricants, e.g. for lubrication of telescope pads on mobile cranes LAGERMEISTER XXL Special Mineral oil -30 / KP2P-30 Special longlife grease with an extremely wide application area, wheel bearing grease STABYL 300 AL 1 / 300 AL 2 1 and 2 Al-X Mineral oil -20 / Graphite KPF1P-20 / KPF2P-20 Aluminium complex-soap based EP lubricating grease with graphite, especially for asphalt mixing plants STABYL AX 1 / AX 2 1 and 2 Al-X Mineral oil -20 / former ALMETYN 1 / 2 KP1P-20 / KP2P-20 Aluminium complex-soap based EP lubricating grease STABYL AX Al-X Mineral oil -15 / former ALMETYN 3 KP3P-15 Aluminium complex-soap based EP lubricating grease STABYL ECO /000 Li/Ca synthetic -40 / KPE00/000K-40 EP fluid grease for central lubricating systems STABYL ECO EP Li/Ca synthetic -40 / KPE2K-40 EP universal grease STABYL ECO S 12 G /2 Lithium synthetic -40 / Graphite KPFE2/1K-40 EP universal grease with solid lubricants STABYL HD Lithium Mineral oil -10 / MoS 2, Graphite KPF2K-10 Lithium-soap based EP heavy duty lubricating grease STABYL LT Lithium synthetic -50 / KPHC2N-50 Fully synthetic, low-temperature grease STABYL MO /3 Lithium Mineral oil -25 / MoS 2 former MOPLATTYN 500 KPF2K-25 Lithium-soap based longlife grease containing MoS 2 URETHYN E organic synthetic -20 / KPE2S-20 Fully synthetic polyurea high temperature lubricating grease

5 Classification NLGI-grade Thickener Temperature range in C viscosity at 40 C [mm 2 /s] Solid lubricant Available as spray Plain and roller bearing greases URETHYN E/M 1 / E/M 2 URETHYN MP 1 / MP 2 1 and 2 organic semi-synthetic -20 / KPE1R-20 / KPE2R-20 Semi-synthetic polyurea high temperature lubricating grease 1 and 2 organic Mineral oil -20 / KP1R-20 / KP2R-20 Mineral-oil based high temperature polyurea lubricating grease; e.g. for road pavers; Vögele approval Adhesive lubricants CEPLATTYN 300 CEPLATTYN ECO 300 CEPLATTYN KG 10 HMF /2 Al-X Mineral oil -30 / Graphite Graphite paste with high pressure and adhesive additives, free of bitumen, heavy metals and solvents Calcium native -20 / +80 Graphite adhesive lubricant with solid lubricants, water resistant and corrosion protection /00 Al-X Mineral oil -10 / Graphite OGPF00N-10 Sprayable adhesive lubricant, free of heavy-metal and chlorine, high load carrying capacity, water resistant Pastes and grease pastes gleitmo 100 gleitmo 160 neu gleitmo 165 gleitmo 805 gleitmo WSP 5000 gleitmo WSP 5040 MEISSELPASTE Mineral oil -35 / +400 MoS 2 etc. MoS 2 -based assembly paste Al-X Mineral oil -30 / Combination Universal copper paste for bolt joints, bolts, hinges and couplings synthetic -40 / Combination Metallurgically compatible anti-seize paste Lithium Mineral oil -20 / white White mineral oil based high performance grease paste, e.g. for incremental launching Spec. Ca-X Mineral oil -20 / white KPF2N-20 High performance grease with white solid lubricants Spec. Ca-X Mineral oil -20 / white Universal lubricating and assembly paste with white solid lubricants Al-X Mineral oil -20 / Combination Special lubricant for socket tools and bushings of hydraulic hammers, Atlas Copco approval Application equipment for SYSTEM REINER cartridges HD Single-handed grease gun HD Two-handed grease gun DFP 500/FLT pneumatic press For simple, clean and accurate lubrication of high-quality machines. TÜV and GS approvals. Up to 150 bar pressure in one hand operation Complete discharge by special piston shape For simple, clean and accurate lubrication of high-quality machines with long lubricating lines, large quantities of lubricant and large volumes of lubricant per stroke. Obtainable pressure 400 bar. TÜV and GS appovals. Weight: only 950 g Maximum obtainable pressure: 400 bar Complete discharge by special piston shape The professional pneumatic press is the ideal solution for lubricating all kinds of machinery, commercial vehicles and construction machinery. It is supplied with reinforced rubber hose and 4-jawed professional nozzle. Practical single-hand operation Controlled grease feed using a single push: Approx. 1.2 cm³/stroke at 250 bar Input pressure 2-10 bar, transmission ratio 1:30 Connecting thread M 10x1

6 Zeitzen-Mathieu range 0 Release Agents - Cleaner and release agents for bitumen and concrete in building construction/civil engineering and pre-cast concrete plants. 1 Adhesive Lubricants - For open gear lubrication, wire rope and chain lubrication 2 Lubricating Greases - Different greases for plain and anti-friction bearings. Rail-, wheel flange and switch lubricants. Food grade greases. 3 Lubricating Fluids - Lubricating fluids for lifetime and loss lubrication of chains, wire ropes and gears 4 Pastes and Grease Pastes - MoS 2 -pastes, white lubricating pastes, grease pastes and high-temperature pastes. 5 Solid Film Lubricants - Solvent or water-based lubricants reducing friction and wear. Extremely resistant against pressure, high and low temperatures. 6 Aerosols - Sprayable release agents, adhesive lubricants, lubricating greases and fluids, pastes, grease pastes and solid film lubricants. 7 Metal Forming Lubricants - Water- and non-water-miscible lubricants for hot forming. Die casting release agents and auxiliary casting materials. 8 Chemo-technical s - Solid lubricants as powder, corrosion protection products, cleaner and thinner for numerous application areas. 9 Application Equipment - One- and two-handed patented grease guns ( System Reiner ).TÜV and GS approved. Up to 400 bar pressure. For PE-cartridges and PE-tubes. FUCHS LUBRITECH GMBH Hans-Reiner-Str Weilerbach/Germany Internet Phone ++49 (0) / Fax ++49 (0) / info@fuchs-lubritech.de 1 Zd 05/