Amphenol. Amphenol-Tuchel Electronics GmbH. Series C 16-3 Circular Connectors

Transcription

1 Amphenol Amphenol-Tuchel Electronics GmbH Series C 6-3 Circular Connectors

2 The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence we offer our customers exceptional technical support and worldwide service in the areas of development, production and distribution. Amphenol-Tuchel Electronics GmbH has a successful history as a partner to our customers and sets standards for connector technology. Quality From the beginning of the development process, Amphenol-Tuchel Electronics GmbH gives quality considerations the top priority. Meeting customer requirements is the main focus of the product development process. Interdisciplinary project teams with diverse backgrounds from marketing, product engineering and production guarantee the development and production of robust and reliable connector solutions. Our quality assessment begins with the initial contact to the customer and extends through the life of the product. A satisfi ed customer is the measure of our success. We strive to use environmentally friendly processes that minimize the waste of natural resources and introduction of toxins into the environment. Certifi cations: TS 6949 ISO 400 ISO 9000:000 General information This catalogue must not be used in any form or manner without our prior approval We reserve the right to change the design due in writing (Copyright Law, Fair Trading Law, to improvement in quality, development or Civil Code). production requirements. This release replaces all former releases. Amphenol

3 Content Page General information Serie C 6-3 Product description Order information Approvals Coding system Technical data 7 Derating curves 9 View of connector style 0 Assembly instructions Shell size Male cable connectors Female receptacles Female cable connectors 3 Male receptacles Accessories 4 Shell size Male cable connectors Female receptacles 5 Female cable connectors Male receptacles 6 Accessories 7 EMV versions 8 Crimp contacts pin Crimp contacts socket Part No. system for crimp contacts 3 Technical Information 4 Remarks / Safety classifi cation 7 Summary of Part Numbers 8 Amphenol 3

4 C 6-3 Product description The circular connector series C 6-3 has two housing sizes. The connectors are designed to meet the high requirements of industrial applications under harsh environmental conditions. The range includes versions with screw and crimp terminations. A selection of crimp contacts for hand crimp tools and crimp machines enables a reliable termination reluting in qualitative, technical and economical advantages. A board selection of housing styles are available. On choosing the housing style and shell size please take both the cable diameter and wire gauge into consideration. If neccessary one should use the long housing versions. Main features and advantages: Circular connectors for power and signal applications with following contact arrangements: Shell size : 8 + PE, 4 + PE, 7 + PE, PE Shell size : 5 + PE, + PE, 4 + PE, 9 + PE For applications in machine tools, measurement and control, process technology and medical equipment Housing are made from high grade plastic material. Vibration safe connection by solid bayonet coupling with lock in positon. Cable housing straight or right-angled with various cable outlets Protection degree IP 65 in mated position. Internal cable clamp or clamping ring provides a safe cable restrain. 4 Amphenol

5 C 6-3 Product description Order information Approvals Order information Colour coding Upon request the coupling ring of the plugs and the housing of the receptacles can be delivered in the colour red, green, blue, yellow and grey. Polarization Depending on the contact arrangements the polarization of this connector series can be varied. The contact inserts can be mounted in alternate positions. The order number in the catalogue refers always to postition. The postition of the contact inserts can also be changed by the customer using a disassembly tool ( see page 4 and 7) to remove the insert and remount it in the required position ( see page 6) Crimp version Order numbers do not include crimp contacts. Please order separately (page / ) Crimp tooling Ask for our catalogue Tools. Testhouse Approvals Approval No. VDE 3964 UL ) E CSA In general approvals refer to representative versions of the connector series. Test report upon request. ) Please refer to the Conditions of Acceptability. Amphenol 5

6 C 6-3 Coding system Polarization Depending on the contact arrangements the polarization of this connector series can be varied. Please take care of the housing and contact insert characteristics. Shell size Shell size No of contacts No of coding possibil. Position No of contacts No of coding possibil. Position 8 + PE 4 + PE 7 + PE PE , 3, 5, 7,, 3, 4, 5, 6, 7,, 3, 4, 5, 7, 3, 5, PE 4 + PE + PE 9 + PE ,, 3, 4, 6, 7,, 3, 4, 5, 6, 7,, 3, 4, 5, 6, 7, 3, 4, 5, 6, 7 Coding point on the shell Coding point on the contact insert Pos. Pos. Pos. 3 Pos. 4 Pin contact insert termination side Pos. 5 Pos. 6 Pos. 7 Pos. Pos. Pos. 3 Pos. 4 Socket contact insert termination side Pos. 5 Pos. 6 Pos. 7 Disassembly of contact inserts with disassembly tool (see page 4 and 7) Pin or socket contact insert Disassembly tools: shell size : see page 4 shell size : see page 7 6 Amphenol

7 C 6-3 Technical data Shell size General Characteristics Standard Technical data Shell size Number of contacts 8 + PE 4 + PE 7 + PE PE Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation (overvoltage) category Material group Current carrying capacity Insulation resistance Contact resistance Climatic Characteristics DIN EN ) 400 V 6000 V 3 III II 00 V 00 V 3 x 30 V, x 4 V UL 977, CSA. 400 V 3 x 50 V, x 50 V 50 V 3 x 50 V, x 4 V DIN EN ) DIN EN ) DIN EN ) DIN EN ) DIN EN , test 5b DIN EN , test 3a DIN EN 605--, test a 3000 V 3000 V 3 x 4000 V, x 800 V III III III II II II A 3 x 6 A, x 6 A 6 A 0 8 Ω 5 mω 3 x A, x 6 A UL 977, CSA. 0 A 3 x A, x 4 A 5 A 3 x 0 A, x 5 A Climatic category Operating temperature Mechanical Characteristics Degree of protection Insertion and withdrawal force Mechanical operation Materials DIN EN DIN EN 6059 DIN EN , test 3b IEC 605, test 9a 40 / 5 / C C IP 65 5 N 30 N N 5 N 500 mating cycles Housing material Dielectric material Gasket material Contact plating Other Characteristics Termination technique Wire gauge / AWG Flammability Locking system UL 94 0,4 -,5 mm / 6-4 Polyamide 6.6 Polyamide 6.6 Neoprene silver plated / gold plated crimp 0,09 -,5 mm / 8-4 VO bayonet 0,09 -,0 mm / 8-8 0,09 -,5 mm / 8-4 ) DIN ^= VDE 00- ^= DIN EN The stated technical values refer to the use as connector. Amphenol If these components are used as plug and socket device a reduced current carrying capacity has to be considered. 7

8 C 6-3 Technical data Shell size General Characteristics Standard Technical data Shell size Number of contacts 5 + PE + PE 4 + PE 9 + PE Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation (overvoltage) category Material group Current carrying capacity Insulation resistance Contact resistance Climatic Characteristics DIN EN ) 400 V 6000 V 3 III II A 3 x 500 V, 9 x 300 V 3 x 6000 V, 9 x 4000 V 6000 V 4000 V III III III II II II 3 x A, 9 x A 0 8 Ω 5 mω 400 V 50 V UL 977, CSA. 400 V 3 x 400 V, 9 x 50 V 0 x 400 V, 4 x 50 V 50 V DIN EN ) DIN EN ) DIN EN ) DIN EN ) DIN EN , test 5b DIN EN , test 3a DIN EN 605--, test a 4 x 6 A, 0 x A 6 A UL 977, CSA. 6 A 3 x 0 A, 9 x 5 A 0 x 0 A, 4 x 5 A 5 A Climatic category DIN EN / 00 / / 5 / 56 Operating temperature -40 C C (5+PE: +00 C) Mechanical Characteristics Degree of protection Insertion and withdrawal force Mechanical operation Materials DIN EN 6059 DIN EN , test 3b DIN EN , test 9a IP 65 5 N 5 N 30 N 5 N 500 mating cycles Housing material Polyamide 6.6 Dielectric material Poliamide 6.6 Gasket material Neoprene Contact plating silver plated/ gold plated Other Characteristics Termination technique Wire gauge / AWG Flammability UL 94 screw 4 mm / 0 0,09 -,5 mm / 8-4 VO crimp 0,09 -,5 mm / 8-4 0,09 -,0 mm / 8-8 Locking system bayonet ) DIN EN ^= VDE 00- ^= IEC The stated technical values refer to the use as connector. 8 If these components are used as plug and socket device a reduced current carrying capacity has to be considered. Amphenol

9 C 6-3 Derating curves Shell size Current carrying capacity A PE a) alle contacts Kon Ø,6 Anschlu wire gauge,5 mm all cont wire gau Current carrying capacity A a b 4+PE a) 4 Kon contacts Ø,5 Ansch wire gauge,5 mm b) 4 con contacts Ø,5 wire wire g gauge 0,5 mm b) Ko Ansch con wire g Ambient temperature C Ambient temperature C Current carrying capacity A PE alle contacts Kon Ø,5 Anschlu wire gauge 0,5 mm all conta wire gau Current carrying capacity A a b +3+PE a) alle 4 contacts Kont Ø,6 Anschluß wire gauge,5 mm b) b) alle contacts Kont Ø,5 Anschluß wire gauget 0,5 mm Ambient temperature C Ambient temperature C Shell size Current carrying capacity A PE a) alle contacts Ko Ø,0 Ansch wire gauge 4,0 mm b) all all con contacts Ø,0 wire ga wire gauge,5 mm b) alle Ko Ansch all con wire ga Current carrying capacity A a b +PE a) 34 Kon contacts Ø,5 Ansc wire gauge,5 mm b) 39 con contacts Ø,6 wire g wire gauge,5 mm b) 9 Kon Ansc 9 con wire g Ambient temperature C Ambient temperature C Current carrying capacity A 0 a 5 b Ambient temperature 4+PE a) Ko contacts Ø,6 Ansch wire gauge,5 mm b) 4 contacts Ø,5 wire g wire gauge 0,5 mm b) 4 Kon Ansch 4 con wire g C Current carrying capacity A Ambient temperature 9+PE alle contacts Kon Ø,5 wire Anschlu gauge 0,5 mm all conta wire gau C Amphenol 9

10 C 6-3 Male cable connector, Shell size and Identification Figure Description Conn. Style Page Size Size Male cable connector Long version with internal cable clamp I 5 Short version, with clamping ring H 5 Right -angled, with clamping ring K 5 Female cable connector Long version with internal cable clamp E 3 6 Short version, with clamping ring D 3 6 Right-angled, with clamping ring F 3 6 Female receptacle Flange mounting, with mounted gasket G 3 5 Panel mounting with ring nut, with gasket N 3 Male receptacle Flange mounting, with mounted gasket C Amphenol

11 C 6-3 Assembly instructions Shell size and Torque for back shell and cable screw min. Nm max. Nm short back shell clamping ring cable nut sealing gasket long back shell male insert with locking ring internal strain relief metal washer right-angled back shell tightening torque 0,5 Nm female insert with locking ring Amphenol C 6-3 Shinning lengths Screw contacts 7,0 + mm ) Crimp contacts 0,09-0,5 mm 3 +0,5 mm 0,35-0,50 mm 3 +0,5 mm 0,50 -,50 mm 3,5 + mm ) end splice recommended Amphenol

12 C 6-3 Shell size Male cable connectors I H K Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø 0- Ø -4 Male cable connector for crimp contacts, long, style I with internal cable clamp, without contacts ) 8 + PE 4 + PE.N C06 0I C06 0I x.n x.n C06 0I04 00 C06 0I PE x C06 0I05 00 C06 0I N x.n PE.N C06 0I07 00 C06 0I Cable outlet Ø 8-0 Ø 0- Male cable connector for crimp contacts, short, style H with clamping ring, without contacts ) 8 + PE.N C06 0H C06 0H ) 4 + PE x.n x.n C06 0H04 00 C06 0H PE x.n x.n C06 0H05 00 C06 0H PE.N C06 0H07 00 C06 0H Male cable connector for crimp contacts, style K with clamping ring, without contacts ) 8 + PE.N C06 0K C06 0K PE x.n x.n C06 0K04 00 C06 0K PE x C06 0K05 00 C06 0K N x.n PE.N C06 0K07 00 C06 0K ) Please order crimp contacts separately, see page /. ) Part No system for crimp contacts, see page 3. Amphenol

13 C 6-3 8,6 ±0, (.6) Shell size Female receptacles G Ø 3,8 +0, oder M3,5 (.5) Panel cutout Ø 6, +0, (.03) 8,6 ±0, (.6) N 30, +0, (.89) Panel cutout SW7, +0, (.07) Description Drawing No. of cont. Contacts ) Part No. Female receptacle for crimp contacts, style G, without contacts ) Female receptacle for crimp contacts, style N, without contacts ) 8 + PE.N C06 0G PE x.n x.n PE x.n x.n C06 0G PE.N C06 0G PE.N C06 0N PE x.n x.n PE x.n x.n PE.N C06 0G C06 0N C06 0N C06 0N C 6-3 Shell size Female cable connectors E D F Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø 0- Ø -4 Female cable connector for crimp contacts, long, style E with internal strain relief, without contacts ) Female cable connector for crimp contacts, short, style D with clamping ring, without contacts ) 8 + PE.N C06 0E C06 0E PE x.n C06 0E04 00 C06 0E x.n PE x.n C06 0E05 00 C06 0E x.n PE.N C06 0E07 00 C06 0E Cable outlet Ø 8-0 Ø PE.N C06 0D C06 0D PE x.n C06 0D04 00 C06 0D x.n PE x.n C06 0D05 00 C06 0D x.n PE.N C06 0D07 00 C06 0D Female cable connector for crimp contacts, style F with clamping ring, without contacts ) 8 + PE.N C06 0F C06 0F PE x.n C06 0F04 00 C06 0F x.n PE x.n C06 0F05 00 C06 0F x.n PE.N C06 0F07 00 C06 0F ) ) Please order crimp contacts separately, see page /. Part No system for crimp contacts, see page 3. Amphenol 3

14 C 6-3 8,6 ±0, (.6) Shell size Male receptacles C Ø 3,8 +0, oder M3,5 (.5) Panel cutout Ø 6, +0, (.03) 8,6 ±0, (.6) Description Drawing No. of cont. Male receptacle for crimp contacts, style C, without contacts ) 8 + PE Contacts ).N C06 0C PE x.n x.n Part No..N C06 0C C06 0C PE x.n x.n C06 0C PE.N C06 0C C 6-3 Shell size Accessories Description Drawing Part No. Protective cap for male cable connector and male receptacle for male cable connector for male receptacle C06 00U C06 00U000 0 Protective cap for female cable connector and female receptacle for male cable connector C06 00V for male receptacle C06 00V000 0 Disassembly tool for pin- and socket inserts FH ) Please order crimp contacts separately, see page /. ) Part No system for crimp contacts, see page 3. 4 Amphenol

15 C 6-3 Shell size Male cable connectors I H K Description Drawing No. of cont. Male cable connector, long, style I with internal strain relief, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) Contacts ) Part No. Cable outlet 3) Ø -4 Ø 4-6 Ø PE C06 0I C06 0I C06 0I PE 4 + PE 9 x.n x.n x.n x.n C06 0I0 003 C06 0I0 004 C06 0I C06 0I C06 0I0 005 C06 0I PE.N C06 0I C06 0I C06 0I Male cable connector, short, style H with clamping ring, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) Cable outlet Ø 0- Ø -4 Ø PE C06 0H C06 0H PE 4 + PE 9 x.n x.n x.n x.n C06 0H0 003 C06 0H0 004 C06 0H C06 0H C06 0H PE.N C06 0H C06 0H Male cable connector, style K with clamping ring, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) 5 + PE C06 0K PE 4 + PE 9 x.n x.n x.n x.n C06 0K0 004 C06 0K PE.N C06 0K C 6-3 Ø Shell size Female receptacle G Ø Panel cutout Description Drawing No. of cont. Contacts ) Part No. Female receptacle, style G, 5 + PE screw termination, + PE-, 4 + PE and 9 + PE version without contacts ) 5 + PE C06 0G PE 9 x.n x.n PE 4 x.n x.n C06 0G0 000 C06 0G PE.N C06 0G ) Please order crimp contacts separately, see pag /. ) Part No system for crimp contacts, see page 3. Amphenol 5

16 C 6-3 Shell size Female cable connectors E D F Description Drawing No. of cont. Female cable connector, long, style E with internal strain relief, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) Contacts ) Part No. Cable outlet 3) Ø -4 Ø 4-6 Ø PE C06 0E C06 0E C06 0E PE 4 + PE 9 x.n C06 0E0 003 C06 0E0 004 C06 0E x.n x.n x.n C06 0E C06 0E C06 0E PE.N C06 0E C06 0E C06 0E Female cable connector, short, style D with clamping ring, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) Cable outlet Ø 0- Ø PE C06 0D C06 0D PE 4 + PE 9 x.n x.n x.n x.n C06 0D0 003 C06 0D0 004 C06 0D C06 0D PE.N C06 0D C06 0D Female cable connector, style F with clamping ring, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) 5 + PE C06 0F PE 9 x.n C06 0F x.n PE 4 x.n x.n C06 0F PE.N C06 0F C 6-3 Ø Shell size Male receptacle C Ø Panel cutout Description Drawing No. of cont. Contacts ) Part No. Male receptacle, style C, 5 + PE screw termination, + PE-, 4 + PE and 9 + PEversion without contacts ) 5 + PE C06 0C PE 9 x.n x.n PE 4 x.n x.n C06 0C0 000 C06 0C PE.N C06 0C ) Please order crimp contacts separately, see page /. ) Part No system for crimp contacts, see page 3. 6 Amphenol

17 C 6-3 Shell size Accessories Description Figure Part No. Protective cap for male cable connector and male receptacle for male cable connector for male receptacle C06 00U000 0 C06 00U Protective cap for female cable connector and female receptacle for female cable connector for female receptacle C06 00V000 0 C06 00V Disassembly tool for pin-and socket inserts FH Amphenol 7

18 C 6-3 EMV Product description The C 6-3 EMI connectors excel by versatile fields of application, especially high mechanical requirements, industrial ebvironments and demands for safe contact. Main features: high attenuation of shielding contact inserts suitable for standard and EMI versions completely compatible with standard C 6-3, size same technical characteristics as standard C 6-3, see page 7 mechanical lifetime: 00 mating cycles we recommend the usage of the versions with two-part metal housing in very harsh environmental conditions Two versions available:.version with metalized plastic housing accord. VDE 060. PE wire is connected to cable shield and housing. In case of error the current will be lead directly to the PE wire. Combined version with metalized plastic and two-part metal housing accord. VDE 03. PE wire is securely and firmly connected with the metal housing. Crimp version Order numbers do not include crimp contacts. Please order separately (see page /). Crimp contact for higher currents are available upon request. Crimp tooling Ask for our catalogue Tools. Testhouse Approval Approval No. UL ) E ) Please refer to the Conditions of Acceptability 8 Amphenol

19 C 6-3 EMV Shell size Description Drawing No. of cont. Contacts ) Part No. Cable outlet Ø max. 0.5 Ø max..5 Male cable connector, style H, without contacts ), without cable screw, metalized plastic housing 8 + PE 4 + PE.N C06 0H C06 0H x.n x.n C06 0H C06 0H PE x C06 0H C06 0H N x.n Female cable connector, style D, without contacts ), without cable screw, metalized plastic housing 7 + PE 8 + PE 4 + PE +3+PE 7 + PE.N C06 0H C06 0H N C06 0D C06 0D x.n x.n C06 0D C06 0D x C06 0D C06 0D N x.n N C06 0D C06 0D Cable outlet Ø 9- Male cable connector, without contacts ), two part metal housing, with PE contact 8 + PE 4 + PE.N x.n x.n C06 0H C06 0H PE x.n x.n C06 0H PE.N C06 0H Female cable connector, without contacts ), two part metal housing, with PE contact. 8 + PE 4 + PE.N x.n x.n C06 0D C06 0D PE x.n x.n C06 0D PE.N C06 0D ) Please order crimp contacts separately, see page /. ) Part No system for crimp contacts, see page 3. Amphenol 9

20 C 6-3 EMV 8,6 ±0, (.6) Shell size Ø 3,8 +0, oder M3,5 (.5) Panel cutout Ø 6, +0, (.03) 8,6 ±0, (.6) 30, +0, (.89) SW7, +0, (.07) Panel cutout Description Drawing No. of cont. Female receptacle, style G, without contacts ) Contacts ) Part No. 8 + PE.N C06 0G PE x.n x.n C06 0G PE x.n x.n C06 0G Female receptacle, style N, without contacts ) 7 + PE.N C06 0G PE.N C06 0N PE x.n x.n C06 0N PE x.n x.n C06 0N PE.N C06 0N Male receptacle, style C, without contacts ) 8 + PE.N C06 0C PE x.n x.n C06 0C PE x.n x.n C06 0C PE.N C06 0C Assembly instructions metal housing 5 + Schirmgeflecht tightening torque 4-5 Nm min. Mantel tightening torque 5-7 Nm tightening torque 4-5 Nm ) ) 0 Please order crimp contacts separately, see page /. Part No system for crimp contacts, see page 3. Amphenol

21 6-3 Crimp contacts Pin Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines 00 resp. 00 pcs 000 pcs. (feeding left or right hand side) Series Contact Ø in mm Isulation Ø in mm No. of cont. Shell size Wire gauge in mm AWG Supplied as pcs. Part No. Contact plating silver gold C 6-3,5 0,7 -,6 4 + PE 0,09-0,5 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE 8-4 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,3 -,0 4 + PE 0,35-0,5 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE - 0 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,6 -, 4 + PE 0,75 -,0 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE 8 0,5 -,5 mm contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,6,0 -,0 8 + PE PE + PE 4 + PE 0-6,5 -,5 mm single contact contacts on reel right left VN () ZN () HN () TN () VN () ZN () HN () TN () C 6-3,6,8 -,8 8 + PE PE + PE 4 + PE 6-4 0,5 -,5 mm single contact contacts on reel right left VN () ZN () HN () TN () VN () ZN () HN () TN () C 6-3,6,5-3,5 8 + PE 0-6 single contact 00 VN () VN () PE + PE 4 + PE,5 -,5 mm contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,8 -,8 4 + PE 6-4 single contact 00 VN (0) VN (0) + PE contacts on reel 00 ZN () ZN () right 000 HN () HN (),5 -,5 mm left 000 TN () TN (),5-3,5 4 + PE 6-4 single contact 00 VN (0) VN (0) + PE contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () Single contact in plastic bag; stamped contact on reel HN = feeding right side / TN = feeding left side Amphenol

22 6-3 Crimp contacts Socket Stamped single contacts Stamped contacts on reel for hand crimping tools Stamped contacts on reel for crimp machines 00 resp. 00 pcs 000 pcs. (feeding left or right hand side) Series Contact Ø in mm Isulation Ø in mm No. of cont. Shell size Wire gauge in mm AWG Supplied as pcs. Part No. Contact plating silver gold C 6-3,5 0,7 -,6 4 + PE 0,09-0,5 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE 8-4 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,3 -,0 4 + PE 0,35-0,5 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE - 0 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,6 -, 4 + PE 0,75 -,0 mm single contact 00 VN () VN () PE 7 + PE 4 + PE 9 + PE 8 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,6,0 -,0 8 + PE PE + PE 4 + PE 0,5 -,5 mm 0-6 single contact contacts on reel right left VN () ZN () HN () TN () VN () ZN () HN () TN () C 6-3,6,8 -,8 8 + PE PE + PE 4 + PE,5 -,5 mm 6-4 single contact contacts on reel right left VN () ZN () HN () TN () VN () ZN () HN () TN () C 6-3,6,5-3,5 8 + PE 0,5 -,5 mm single contact 00 VN () VN () PE + PE 4 + PE 0-6 contacts on reel right left ZN () HN () TN () ZN () HN () TN () C 6-3,5,8 -,8 4 + PE,5 -,5 mm single contact 00 VN (0) VN (0) + PE 6-4 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN (),5-3,5 4 + PE,5 -,5 mm single contact 00 VN (0) VN (0) + PE 6-4 contacts on reel 00 ZN () ZN () right 000 HN () HN () left 000 TN () TN () Single contact in plastic bag; stamped contact on reel HN = feeding right side / TN = feeding left side Amphenol

23 Part No. system for crimp contacts VN ) 0_ ) 06 _ 3) 000 _ 4) () _ 5) ) supplied as: VN = single contact 00 pcs. ZN = contacts on reel 00 resp. 00 pcs. HN = contacts on reel with 000 contacts (contact feeding right hand side) TN = contacts on reel with 000 contacts (contact feeding left hand side) ) Type of contact: 0 = male contact 0 = female contact 3) Contact Ø: e.g. 06 =,6 mm 4) Connection and wire gauge, e.g. 005: 0,09-0,5 mm 0046: 0,35-0,5 mm 0047: 0,75 -,0 mm 5) Plating: () = silver plated () = gold plated (4) = gold plated for high performance Amphenol 3

24 C 6-3 Technical Information Termination methods Screw connection Screw clamps are designed acc. to EN / VDE Chart below shows the screw size depending on wire size and the required clamping and testing torque.. Chart Wire size (mm ) max. 4 Screw size M 3 Test torque (Ncm) 50 Diagram below shows the range of tensile strength for a screw connection with a clamp screw M3, fastened with a torque of 50 Ncm, depending on the wire size. Diagram Tensile strength Wire gauge This comparison chart allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm ). Chart AWG Wire composition Wire diameter Wire size 30 x 0,5 0,5 mm 0,05 mm 7 x 0,0 0,36 mm 0,06 mm 8 x 0,3 0,3 mm 0,08 mm 7 x 0,3 0,38 mm 0,09 mm 6 x 0,40 0,40 mm 0,3 mm 7 x 0,6 0,48 mm 0,4 mm 9 x 0,0 0,5 mm 0,5 mm 4 x 0,5 0,5 mm 0, mm 7 x 0,0 0,6 mm 0,3 mm 9 x 0,3 0,64 mm 0,4 mm x 0,64 0,64 mm 0,33 mm 7 x 0,5 0,76 mm 0,36 mm 9 x 0,6 0,8 mm 0,38 mm 0 x 0,8 0,8 mm 0,5 mm 7 x 0,3 0,97 mm 0,56 mm 9 x 0,0,0 mm 0,6 mm 8 x,0,0 mm 0,79 mm 9 x 0,5,7 mm 0,96 mm 6 9 x 0,9,44 mm,3 mm 4 9 x 0,36,80 mm,95 mm 9 x 0,46,9 mm 3,09 mm 0 37 x 0,40 3,0 mm 4,60 mm 8 33 x 0,9 4,0 mm 8,80 mm 6 33 x 0,36 5,5 mm 3,5 mm It has to be noted that wires of the same AWG number but with different composition have slightly different mm. Chart 3 Composition and Dimensions of Copper Wires Wire Size Wire Composition Wire diameter 0,09 mm x 0,0 0,48 mm 0,4 mm 8 x 0,0 0,50 mm 0,5 mm 4 x 0,5 0,70 mm 0,34 mm 7 x 0,5 0,78 mm 0,5 mm 6 x 0,0,0 mm 0,75 mm 4 x 0,0, mm,0 mm 3 x 0,0,4 mm,5 mm 30 x 0,5,6 mm,5 mm 35 x 0,30, mm 4,0 mm 56 x 0,30,8 mm 6,0 mm 9 x 0,64 3,4 mm 0 mm 9 x 0,80 4,3 mm 4 Amphenol

25 C 6-3 Technical Information Crimp connection A crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. Precise crimping dies which are matched to the crimp barrel and the wire size and a defined deformation result in a reliable electrical connection. There are open crimp barrels (stamped contacts) and closed crimp barrels (turned contacts). The main advantages of crimp connections are: Efficient termination of contacts. Reproducible termination achieve consistent electrical and mechanical results The requirements for crimp connections are defined in DIN EN 6035-, IEC An important point of the quality of a crimp connection is the achieved tensile strength of the termination. Easily measured, the tensile strength is a practible means for quality control purposes. Diagram below shows the required minimum tensile strength for open and closed barrels depending on the wire size. Assembly instructions For crimp contacts use the released crimp tool. The insertion and extraction of crimp contacts shall only be approved with the corresponding insertion / extraction tool. A detailed description of the crimp technology can be found in our crimp tooling catalogues. Crimp contacts are in this catalogues on page and. Diagram Min. tensile strength N / lb N lb mm AWG 0,05 0, 0, 0,5,0,5,5 4,0 6,0 0, Wire gauge in mm / AWG 0 Amphenol 5

26 C 6-3 Technical Information Degree of protection Electrical devices to which connectors belong to have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by its housings with their latching devices and sealed cable entries. The degree of protection can be selected depending on the type of intended use. The standard IEC 6059 and/or DIN EN 6059 has specified the degree of protection and divided into several classes. The degree of protection is indicated in the following way: IP 65 Code letters (Internat. Protection) st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) nd charact. numeral (degree of protection against ingress of water) The following charts 4 and 5 give an overview about all protection degrees. Chart 4 st charact. Brief description numeral Non-protected Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of 50mm Ø. Protected against access to hazardous parts with a finger. Protected against solid foreign objects of,5mm Ø. Protected against access to hazardous parts with a tool. Protected against solid foreign objects of,5mm Ø. Protected against access to hazardous parts with a wire. Protected against solid foreign objects of mm Ø. Protected against access to hazardous parts with a wire. Dust-protected. Protected against access to hazardous parts with a wire Dust-tight. Definition The probe, sphere of 50mm Ø, shall not fully penetrate and shall have adequate clearance from hazardous parts. The jointed test finger of mm Ø, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of,5mm Ø, shall not fully penetrate. The probe of,5mm Ø shall not penetrate at all. The probe of mm Ø shall not penetrate at all. The probe of mm Ø shall not penetrate. Intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. The probe of mm Ø shall not penetrate. No intrussion of dust. Chart 5 nd charact. Brief description numeral K ) Non-protected Protected against vertically falling water drops Protected against vertically falling water drops when enclosure tilted up to 5 Protected against spraying water Protected against splashing water Protected against water jets Protected against powerful water jets Protected against the effects of temporary immersion in water Protected against the effects of continous immersion in water Protected against water during high pressure/steam jet cleaning Definition ) Remark: Numeral acc. to DIN part 9, vehicles IP code Vertically falling drops shall have no harmful effects. Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angel up to 5 on either side of the vertical. Water sprayed at an angle up to 60 on either side of the vertical shall have no harmful effects. Water splashed against the enclosure from any direction shall have no harmful effects. Water projected in jets against the enclosure from any direction shall have no harmful effects. Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is temporalily immersed in water for 30 min. in m depth. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. Water projected in powerful jets with high pressure against the enclosure from any direction shall have no harmful effects. 6 Amphenol

27 C6-3 Remarks Safety classification. General Remarks These connectors are designed and produced in conformity with the low voltage directive (73/3/EWG) respectively Gerätesicherheitsgesetz (German law) and are especially in according with the standards DIN EN 6984 / IEC 6984 (VDE 067); IEC (VSE 00-) and IEC The connectors may be used only within the technical ratings. These connectors with / without breaking capacity are designed and produced according to DIN EN 6984/VDE067. All technical data refers to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper assembly of the connector device, and a precise fit of the connectors.. Application Remarks Connectors with / without breaking capacity must be used according to specified technical ratings. The technical data represents the initial value of mated parts under predetermined conditions and length of time.these values could change with different test parameters or product requirements. The 6-3 Series connectors are used in a wide variety of industries and equipment. Some of these include industrial machines and controls, data processing, instrumentation and test equipment, medical devices, telecommunication s network and equipment, plus outdoor and marine applications. All rated data for the connectors listed in this catalogues are based on over-voltage category III ) and pollution degree 3 ) for electronic applications. Connectors were completely mated according to their respective safety locking mechanism. Selection and testing of connectors with / without breaking capacity to meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user. 3. Assembling Remarks Protection against electrical shock of the termination of the connectors shall be secured by correct mounting. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. Care must be taken to ensure the parts are correctly mated and screws are tightened with the proper torque. 4. Termination Remarks Cable connectors are effectively secured when using the internal cable clamp. When the connector contains a simple gland bushing for retention without clamping ring the cable should have a strain relief close behind the connector. All cable properties or specifications must be compatible with the connector design and materials. Designated wire conductors must be terminated to the correct poles in the connector. Crimp contacts must be fully inserted into the plastic housing and retention assured with a slight tug on the wire. Wire should be stripped correctly according to printed specifications to insure no electrical contact can be made between the conductors. There should be no nicked or cut strains during the stripping action. 5. Safety Classification acc. to DIN EN 6984 / VDE 067 / IEC 6984 Style enclosed mated enclosed unmated protective earthing contact finger safety mated finger safety unmated hand back safety mated connector with breaking capacity rewirable Cable clamp with without Male cable connector X X X X X X X X X Female cable connector X X X X X X X X X Male receptacle screw / crimp Female receptacle screw / crimp X 3) X X X 3) X X X X X 3) X X 3) X 3) X X X X ) Overvoltage category III: Equipment intended for the use in installations or parts of it in which lightning overvoltages do not need to be considered, however switching overvoltages generated by the equipment, and for cases where the reliability and the availability of the equipment or its dependent circuits are subject to special requirements. Examples are protecting means, switches and sockets. ) Pollution degree 3: Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to be expected. 3) Protection against electrical shock on the termination side has to be secured by proper mounting. Amphenol 7

28 Summary of Part Numbers Part No. Page Part No. Page Part No. Page Part No. Page C06 00U C06 0D C06 0G C06 0I C06 00U C06 0D C06 0G C06 0I C06 00U C06 0D C06 0G C06 0I C06 00U C06 0D C06 0G C06 0I C06 00V C06 0D C06 0G C06 0I C06 00V C06 0D C06 0G C06 0I04 00 C06 00V C06 0D C06 0G C06 0I C06 00V C06 0D C06 0G C06 0I C06 0C C06 0E C06 0G C06 0I C06 0C C06 0E C06 0G C06 0I C06 0C C06 0E C06 0H C06 0I05 00 C06 0C C06 0E C06 0H C06 0I C06 0C C06 0E C06 0H C06 0I07 00 C06 0C C06 0E C06 0H C06 0I C06 0C C06 0E C06 0H C06 0I C06 0C C06 0E C06 0H C06 0I C06 0C C06 0E C06 0H C06 0I C06 0C C06 0E C06 0H04 00 C06 0K C06 0C C06 0E C06 0H C06 0K C06 0D C06 0E C06 0H C06 0K C06 0D C06 0E C06 0H C06 0K04 00 C06 0D C06 0E C06 0H C06 0K C06 0D C06 0E C06 0H C06 0K C06 0D C06 0E C06 0H C06 0K05 00 C06 0D C06 0E C06 0H C06 0K C06 0D C06 0F C06 0H05 00 C06 0K07 00 C06 0D C06 0F C06 0H C06 0K C06 0D C06 0F C06 0H C06 0K C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H07 00 C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0F C06 0H C06 0N C06 0D C06 0G C06 0H C06 0C Amphenol

29 Summary of Part Numbers Part No. Page Part No. Page Part No. Page Part No. Page C06 0D HN () TN () ZN () C06 0D HN () TN () ZN () C06 0E HN () TN () ZN () C06 0E HN () TN () ZN () C06 0E HN () TN () ZN () C06 0F HN () VN () ZN () C06 0G HN () VN () ZN () C06 0H HN () VN () ZN () C06 0H HN () VN () ZN () C06 0I HN () VN () ZN () C06 0I TN () VN () ZN () C06 0I TN () VN () ZN () C06 0K TN () VN () ZN () FH TN () VN () ZN () FH TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN (0) ZN () HN () TN () VN (0) ZN () HN () TN () VN (0) ZN () HN () TN () VN (0) ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () ZN () HN () TN () VN () HN () TN () VN (0) HN () TN () VN (0) HN () TN () VN (0) HN () TN () VN (0) Amphenol 9

30 30 Amphenol

31 Amphenol 3

32 International ATE 00 B Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright 04/06 by Amphenol-Tuchel Electronics GmbH, Germany Argentina Amphenol Argentina Av. Callao 930 nd Floor Offi ce B Plaza C03 AAP Buenos Aires Phone +54 / / Fax +54 / / Australia Amphenol Australia Ltd. Fiveways Blvd Keysborough Victoria 3 73 Phone +6 / 3 / 8796 / 8888 Fax +6 / 3 / 8796 / 880 Belgium Amphenol-Tuchel Belgium Brusselbaan 54b B 600 Sint-Pieters-Leeuw Phone +3 / 377 / 549 Fax +3 / 377 / 5303 Brasilia Amphenol do Brasil Ltda. Rua Diogo Moreira 3, 0th Floor CEP Sao Paulo SP Phone +55 / / Fax +55 / / China Amphenol-Tuchel Electronics GmbH China Branch 0- Taishan Road Changzhou 30 Phone +86 / 059 / 5030 Fax +86 / 059 / 5099 France Amphenol-Tuchel France Bât. Le Newton C 7 Mail B. Thimonnier 7785 Lognes Phone +33 / Fax +33 / Germany Amphenol-Tuchel Electronics GmbH August-Haeusser-Str Heilbronn Phone +49 / 73 / 99-0 Fax +49 / 73 / Great Britain Amphenol-Tuchel Great Britain 4 Plover Close Kempshott, Basingstoke Hants, RG 5PQ Phone +44 / 56 / Fax +44 / 56 / Your engineering sales representative: Hong Kong Amphenol East Asia Limited Units 0-0, Railway Plaza 39 Chatham Road South Tsimshatsui, Kowloon Phone +85 / 699 / 663 Fax +8 5 / 6 88 / India Amphetronix Limited Plot No. 05 Bhosari Industrial Area Pune Phone +9 / 0 / 748 Fax +9 / 0 / 7058 Italy Amphenol-Tuchel Italy Via Barbaiana n. 5 l-000 Lainate (MI) Phone +39 / / Fax +39 / / Japan Amphenol Japan, K.K. -3-7, Kudan Minami Chiyoda-Ku Tokyo 0 Phone +8 / 3 / 363 / 56 Fax +8 / 3 / 576 / 7059 Korea Amphenol DaeShin Limited #80 Joong-Dong 3-5 Wonmi-Ku Bucheon-City Kyunggi-Do Korea Phone +8 / / 785 / 588 Fax +8 / / 589 / 54 Mexico Amphenol Mexico Prolongacion Reforma 6-6 B Col. Paseo de las Lomas C.P Mexico D.F. Phone +5 / 55 / Fax +5 / 55 / Singapore Amphenol East Asia Limited Asia Pacifi c Sales Operation Singapore Branch 300 Beach Road #5-07 The Concourse Singapore Phone +7 / / Fax +7 / / South Africa Amphenol International Ltd Chislehurston 30 Impala Road Chislehurston Sandton, 46 Phone +7 / / Fax +7 / / Spain Amphenol-Tuchel Spain Ctra Sabadell a Mollet, km 4.5 Nave Santa Perpetua de Mogoda (Barcelona) Phone +34 / 93 / Fax +34 / 93 / Sweden Amphenol-Tuchel Scandinavia P.O. Box 0 SE 95 4 Märsta Phone +46 / 8 59 / Fax +46 / 8 59 / Taiwan Amphenol East Asia Ltd. Taiwan Branch (H.K.) 6 Zhong Shan Road Lane 956 Taoyuan City Taiwan R.O.C. 330 Phone +886 / 3 / 370 / 7855 Fax +886 / 3 / 360 / 759 Turkey Amphenol Turkiye Ayazaga Mah. Meydan Sk. No. 8 Beybi Giz Plaza, Kat Maslak/Istanbul Phone +90 / 0 / Fax +90 / 0 / USA Amphenol-Tuchel Electronics 6900 Haggerty Road Suite 00 Canton, Michigan 4887 Phone + / 734 / Fax + / 734 / Amphenol Corporation Corporate Headquarters 358 Hall Avenue Wallingford, CT 0649 Phone + / 800 / Phone + / 03 / 65 / Fax + / 03 / 65 / 86 8 Amphenol Amphenol-Tuchel Electronics GmbH 3 August-Haeusser- Str. 0. D Heilbronn. Germany. Phone +49 (0) 73/ Fax +49 (0) 73/ Amphenol