INTERACTIVE. data book NTC THERMISTORS. vishay. One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components

Transcription

1 VISHAY INTERTECHNOLOGY, INC. INTERACTIVE data book NTC THERMISTORS vishay vse-db Notes: 1. To navigate: a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents page to go to the main Table of Contents page. b) Click on the products within the Table of Contents to go directly to the datasheet. c) Use the scroll or page up/page down functions. d) Use the Adobe Acrobat page function in the browser bar. 2. To search the text of the catalog use the Adobe Acrobat search function. One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components

2 V I S H AY I N T E E C H N O L O G Y, I N C. D A T A B O O K ntc thermistors w w w. v i s h a y. c o m

3 SEMICONDUCTORS Rectifiers Schottky (single, dual) Standard, Fast, and Ultra-Fast Recovery (single, dual) Bridge Superectifier Sinterglass Avalanche Diodes Small-Signal Diodes Schottky and Switching (single, dual) Tuner/Capacitance (single, dual) Bandswitching PIN RF Transistors Bipolar Transistors (AF and RF) Dual Gate MOSFETs MOSMICs Optoelectronics IR Emitters and Detectors, and IR Receiver Modules Optocouplers and Solid-State Relays Optical Sensors LEDs and 7-Segment Displays Infrared Data Transceiver Modules Custom Products P r o d u c t L i s t i n g s Zener and Suppressor Diodes Zener (single, dual) TVS (TRANSZORB, Automotive, ESD, Arrays) MOSFETs Power MOSFETs JFETs Passive Components Resistive Products Foil Resistors Film Resistors Metal Film Resistors Thin Film Resistors Thick Film Resistors Metal Oxide Film Resistors Carbon Film Resistors Wirewound Resistors Power Metal Strip Resistors Chip Fuses Variable Resistors Cermet Variable Resistors Wirewound Variable Resistors Conductive Plastic Variable Resistors Networks/Arrays Non-Linear Resistors NTC Thermistors PTC Thermistors Varistors Magnetics Inductors Transformers ICs Power ICs Analog Switches DC/DC Converters RF Transceivers ICs for Optoelectronics Capacitors Tantalum Capacitors Molded Chip Tantalum Capacitors Coated Chip Tantalum Capacitors Solid Through-Hole Tantalum Capacitors Wet Tantalum Capacitors Ceramic Capacitors Multilayer Chip Capacitors Disc Capacitors Film Capacitors Power Capacitors Heavy-Current Capacitors Aluminum Capacitors Silicon RF Capacitors Strain Gage Transducers and Stress Analysis Systems PhotoStress Strain Gages Load Cells Force Transducers Instruments Weighing Systems Specialized Strain Gage Systems

4 NTC Thermistors Vishay Dale Electronics, Inc rd Street Columbus, NE 68601, USA Phone: Fax: Avenue F. Guillaume 70 B-1140, Belgium Phone: Fax:

5 NOTICE Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.

6 Table of Contents Vishay NTC THERMISTORS NTC SMD Global Part Numbering Information NTC SMD /NTCS0402E3... Surface Mount, NTC Thermistors, 0402, NiSn terminations /NTCS0603E3... Surface Mount, NTC Thermistors, 0603, NiSn terminations /NTCS0805E3.....T Surface Mount, NTC Thermistors, 0805, NiSn terminations NTHS Surface Mount Chip NTC Thermistors /NTCS0805E4...(non preferred range) Surface Mount, NTC Thermistors, 0805, AgPd terminations /NTCS0603E4...(non preferred range) Surface Mount, NTC Thermistors, 0603, AgPd terminations NTC Glass Encapsulated Global Part Numbering Information NTC Glass Encapsulated /8..../NTCLG100E & /NTCSMELFE3....T NTC Thermistors, High Temperature Sensors NTC Leaded Global Part Numbering Information NTC Leaded /NTCL202E3.... NTC Thermistors, Accuracy Line /4/6..../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line /NTCLE100E3...SB0 NTC Thermistors, Special Accuracy /NTCLE301E4C90059 NTC Thermistors, Long Insulated Leads /20..../NTCLE...E3...SB0 NTC Thermistors, INSULATED Lead Sensors /NTCLE201E3C90028 NTC Thermistors, Long Non-Insulated Leads M, C, T NTC Leaded Thermistors NTC Molded Global Part Numbering Information NTC Molded /NTCLM101E3....B0 NTC Thermistors, Molded Range /98004/NTCLM101E3C90004/98004 NTC Thermistors, Molded Range NTC Assemblies /3/4.... NTC Thermistors, Special Long Lead Sensors /NTCSCWE3... NTC Thermistors, Screw Threaded Sensors NTC Thermistor Assemblies Overview, Styles, and Script Sheet NTC Thermistors, Steel Capped Sensors NTC Naked Chips Global Part Numbering Information NTC Naked Chips /NTCC100E4.... NTC Thermistors, Naked Chips W Surface Mount Chip NTC Thermistors, Top and Bottom Surface Terminations, High-Density Monolithic Ceramic Construction Packaging Revision: 25-Sep-06 1

7 2

8 Model Numbers Global Part Numbering Information... 4 NTC SMD / NTCS0402E / NTCS0603E / NTCS0805E T NTHS / NTCS0805E4... (non preferred range) / NTCS0603E4... (non preferred range)... 52

9 Global Part Numbering Information NTC SMD GENERAL ORDER INFORMATION PART NUMBER: NTC S 0805 E3 103 F M T N T C S E F M T PRODUCT FAMILY NTC EXECUTION SIZE RoHS COMPLIANCE S = SMD 0805 TERMINATION TYPE E3 = NiSn E4 = AgPd R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values TOLERANCE ON R25 F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % B25/85 VALUE U (ultra low): B25/85 < 3000 L (low): 3000 B25/85 < 3500 M (medium): 3500 B25/85 < 3750 H (high): 3750 B25/85 < 4000 X (very high): 4000 B25/85 < 4250 Z (ultra high): 4250 B25/85 PACKAGING T = Paper Tape PRODUCT DESCRIPTION: RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 615 = SMD NTC SIZE + TYPE 5 = 0805 NiSn 4 = 0402 NiSn 3 = 0603 NiSn 2 = 0603 AgPd 1 = 0805 AgPd TOLERANCE ON R25 5 = 1 % 4 = 2 % 6 = 3 % 3 = 5 % 2 = 10 % R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 22-Sep-06

10 Surface Mount, NTC Thermistors /NTCS0402E3... FEATURES from 6 to 2 %/K even at high temperatures Tolerance on B 25/85 down to 3 % Suitable for wave or reflow soldering NiSn terminations Fully glass coated Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 4.7 kω to 100 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 %; ± 10 % Tolerance on B 25/85 - value see Table below Maximum dissipation at 25 C 125 mw Thermal time constant τ 8s Operating temperature range - 40 to C R/T values see Tables Climatic category 40/125/56 Mass g APPLICATIONS Temperature compensation, sensing and protection in, for example: Battery chargers Consumer equipment Office equipment DESCRIPTION Size 0402 chip thermistors with a negative temperature coefficient. The device has no marking. PACKAGING Available in 8 mm punched paper tape on reel package of units. ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) B 25/85 - VALUE (K) TOLERANCE ON B 25/85 12NC ORDERING CODE SAP MATERIAL NO ) NTCS0402E3... 2) ± 3 * *MT ± 3 * *LT ± 3 * *HT ± 3 * *MT ± 3 * *MT ± 3 * *XT ± 3 * *HT ± 3 * *HT Note 1. replace digit * by 5 for tol. on R 25 C = 1 %, by 4 for 2 %, 6 for 3 %, by 3 for 5 % and by 2 for 10 % 2. replace digit * by J for 5 %, H for 3 %, G for 2 %, F for 1 % tolerance on R 25 C Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 5

11 /NTCS0402E3... Surface Mount, NTC Thermistors DIMENSIONS in millimeters L 1 W T L 2 and L 3 MIN. L 4 MIN. T W 1.0 ± ± ± L2 L4 L1 L3 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4.7 kω CATALOG NUMBER X472 OR SAP NO. NTCS0402E3472YMT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

12 Surface Mount, NTC Thermistors /NTCS0402E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 10 kω CATALOG NUMBER X103 OR SAP NO. NTCS0402E3103YLT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 15 kω CATALOG NUMBER X153 OR SAP NO. NTCS0402E3153YHT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 7

13 /NTCS0402E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 15 kω CATALOG NUMBER X153 OR SAP NO. NTCS0402E3153YHT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 22 kω CATALOG NUMBER X223 OR SAP NO. NTCS0402E3223YMT For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06 ΔR/R DUE TO B-TOLERANCE

14 Surface Mount, NTC Thermistors /NTCS0402E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 22 kω CATALOG NUMBER X223 OR SAP NO. NTCS0402E3223YMT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 33 kω CATALOG NUMBER X333 OR SAP NO. NTCS0402E3333YMT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 9 ΔR/R DUE TO B-TOLERANCE

15 /NTCS0402E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 33 kω CATALOG NUMBER X333 OR SAP NO. NTCS0402E3333YMT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω CATALOG NUMBER X473 OR SAP NO. NTCS0402E3473YXT For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06 ΔR/R DUE TO B-TOLERANCE

16 Surface Mount, NTC Thermistors /NTCS0402E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω CATALOG NUMBER X683 OR SAP NO. NTCS0402E3683YHT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 100 kω CATALOG NUMBER X104 OR SAP NO. NTCS0402E3104YHT ΔR/R DUE TO B-TOLERANCE

17 /NTCS0402E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 100 kω SOLDERING CONDITIONS CATALOG NUMBER X104 OR SAP NO. NTCS0402E3104YHT This SMD thermistor is only suitable for wave or reflow soldering, in accordance with CECC The maximum temperature of 260 C during 40 s should not be exceeded. Typical examples of a soldering processes that will provide reliable joints without damage, are shown below. ΔR/R DUE TO B-TOLERANCE 300 Temperature Characteristic with dual wave soldering 10 s Temperature C first wave 200 K/s C second wave 5 K/s 2 K/s B C A 50 2 K/s Time (s) Typical values (solid line) Process limits (dotted lines) Dimensions in mm A = 0.5 mm B = 0.5 mm C = 1.5 mm For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

18 Surface Mount, NTC Thermistors /NTCS0402E3... Temperature Temperature Characteristic with infrared soldering 10 s C C 215 C 180 C 150 C 130 C 10 s approx 40 s 50 2 K/s limit normal Time (s) Temperature Lead (Pb)-free Reflow Soldering Profile 260 C 245 C 235 C 170 C 2 K/s max 120 C Time (s) 40 s max 20 s min 60 s 6 K/s max 50 limit normal PACKAGING TAPE SPECIFICATIONS All tape specifications are in accordance with IEC Basic dimensions are given below. Carrier tape material is paper. PAPEAPE T Top cover tape Bottom cover tape D 0 P 0 P 2 E 1 F W B 0 G A 0 T 1 P 1 direction of unreeling DIMENSIONS OF PAPEAPE in millimeters PARAMETER DIMENSION TOLERANCE A 1) ± 0.1 B 1) ± 0.1 D ± 0.05 P 2) ± 0.10 E ± 0.10 CUMULATIVE PITCH OVER 10 POSITIONS 0.00 ± 0.1 P ± ± 0.05 T 1 < W 8 ± 0.2 T 0.8 max - Notes 1. Measured 0.3 mm above base pocket 2. P 0 pitch tolerance over any 10 pitches is ± 1 mm Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 13

19 /NTCS0402E3... Surface Mount, NTC Thermistors LEADER/TRAILEAPE SPECIFICATION leader end trailer end empty compartments with cover tape (min. 240 mm) cover tape only trailer (min. 160 mm) Leader/trailer tape leader 400 mm TAPING PACKAGE REQUIREMENTS Component is free and not sticking to top and/or bottom tape. Component should be easy to remove from carrier tape. TESTS AND REQUIREMENTS SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT IEC TEST METHOD TEST PROCEDURE REQUIREMENTS 6 Tc solderability 2 s at 235 C min. 95 % of surface wetted resistance to soldering heat 10 s at 260 C ΔR/R < 5 % For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

20 Surface Mount, NTC Thermistors /NTCS0603E3... FEATURES from 6 to 2 %/K even at high temperatures Tolerance on B 25/85 down to 1 % Suitable for wave or reflow soldering NiSn terminations Fully glass coated Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 2.2 kω to 100 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 % Tolerance on B 25/85 - value see Table below Maximum dissipation at 25 C 125 mw Thermal time constant τ 8s Operating temperature range - 40 to C R/T values see Tables Climatic category 40/125/56 Mass g APPLICATIONS Temperature compensation, sensing and protection in, for example: Battery chargers Consumer equipment Office equipment DESCRIPTION Size 0603 chip thermistors with a negative temperature coefficient. The device has no marking. PACKAGING Available in 8 mm punched paper tape on reel package of 4000 units. ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) B 25/85 - VALUE (K) TOLERANCE ON B 25/85 Note 1. Replace * in 12NC by 3 for 5 %, 6 for 3 %, 4 for 2 %, 5 for 1 % tolerance on R 25 C 2. Replace * in SAP part no by J for 5 %, H for 3 %, G for 2 %, F for 1 % tolerance on R 25 C 12NC ORDERING CODE SAP MATERIAL NO ) NTCS0603E3... 2) ± 1 * *LT ± 1 * *MT ± 1 * *MT ± 1 * *HT ± 1 * *MT ± 1 * *MT ± 1 * *MT ± 1 * *HT ± 1 * *HT ± 1 * *HT ± 1 * *XT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 15

21 /NTCS0603E3... Surface Mount, NTC Thermistors DIMENSIONS in millimeters T W L 1 W T L 2 AND L 3 MIN. L 4 MIN. 1.6 ± ± ± L 4 L 1 L 2 L 3 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2.0 kω CATALOG NUMBER *202 OR SAP NO. NTCS0603E3202*MT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

22 Surface Mount, NTC Thermistors /NTCS0603E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2.2 kω CATALOG NUMBER *222 OR SAP NO. NTCS0603E3222*MT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2.7 kω CATALOG NUMBER *272 OR SAP NO. NTCS0603E3272*MT ΔR/R DUE TO B-TOLERANCE

23 /NTCS0603E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2.7 kω CATALOG NUMBER *272 OR SAP NO. NTCS0603E3272*MT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4.7 kω CATALOG NUMBER *472 OR SAP NO. NTCS0603E3472*HT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

24 Surface Mount, NTC Thermistors /NTCS0603E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4.7 kω RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 10 kω CATALOG NUMBER *472 OR SAP NO. NTCS0603E3472*HT CATALOG NUMBER *103 OR SAP NO. NTCS0603E3103*MT ΔR/R DUE TO B-TOLERANCE ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 19

25 /NTCS0603E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 10 kω RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 15 kω CATALOG NUMBER *103 OR SAP NO. NTCS0603E3103*MT CATALOG NUMBER *153 OR SAP NO. NTCS0603E3153*MT ΔR/R DUE TO B-TOLERANCE ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

26 Surface Mount, NTC Thermistors /NTCS0603E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 22 kω CATALOG NUMBER *223 OR SAP NO. NTCS0603E3223*MT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 33 kω CATALOG NUMBER *333 OR SAP NO. NTCS0603E3333*HT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 21

27 /NTCS0603E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 33 kω CATALOG NUMBER *333 OR SAP NO. NTCS0603E3333*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω CATALOG NUMBER *473 OR SAP NO. NTCS0603E3473*HT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

28 Surface Mount, NTC Thermistors /NTCS0603E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω CATALOG NUMBER *473 OR SAP NO. NTCS0603E3473*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω CATALOG NUMBER *683 OR SAP NO. NTCS0603E3683*HT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep ΔR/R DUE TO B-TOLERANCE

29 /NTCS0603E3... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω CATALOG NUMBER *683 OR SAP NO. NTCS0603E3683*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 100 kω CATALOG NUMBER *104 OR SAP NO. NTCS0603E3104*XT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

30 Surface Mount, NTC Thermistors /NTCS0603E3... SOLDERING CONDITIONS This SMD thermistor is only suitable for wave or reflow soldering, in accordance with CECC The maximum temperature of 260 C during 40 s should not be exceeded. Typical examples of a soldering processes that will provide reliable joints without damage, are shown below. Temperature C 245 C 215 C 180 C 130 C Reflow Soldering 2 K/s Typical values (solid line) Process limits (dotted lines) Dimensions in mm Time (s) 10 s 10 s 40 s 250 Temperature Dimensions of the solder lands 0.8 Lead (Pb)-free Reflow Soldering Profile 260 C 245 C 235 C 170 C 2 K/s max 120 C Time (s) 40 s max 20 s min 60 s 6 K/s max 50 limit normal PACKAGING TAPE SPECIFICATIONS All tape specifications are in accordance with IEC Basic dimensions are given below. Carrier tape material is paper. PAPEAPE P 0 T D 0 P 2 E 1 F W B 0 A 0 P 1 T 1 Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 25

31 /NTCS0603E3... Surface Mount, NTC Thermistors DIMENSIONS OF PAPEAPE in millimeters PARAMETER DIMENSION TOLERANCE A 0 ; note ± 0.1 B 0 ; note ± 0.1 K ± 0.1 W 8.0 ± 0.2 E ± 0.1 F 3.5 ± 0.05 D ± 0.05 D /- 0.0 P 0 ; note ± 0.1 P 1 12 ± 0.1 P ± 0.05 T tape thickness 1.1 max T 1 cover tape < Note 1. Measured 0.3 mm above base pocket 2. P 0 pitch cumulative error over any 10 pitches is ± 1.0 mm LEADER/TRAILEAPE SPECIFICATION leader end trailer end empty compartments with cover tape (min. 240 mm) cover tape only trailer (min. 160 mm) leader 400 mm Leader/trailer tape TAPING PACKAGE REQUIREMENTS Component is free and not sticking to top and/or bottom tape. Component should be easy to remove from carrier tape. TESTS AND REQUIREMENTS SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT IEC TEST METHOD TEST PROCEDURE REQUIREMENTS 6 T solderability 2 s at 235 C min. 95 % of surface wetted C resistance to soldering heat 10 s at 260 C ΔR/R < 5 % For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

32 Surface Mount, NTC Thermistors /NTCS0805E3...T FEATURES from 6 to 2 %/K even at high temperatures Tolerance on R 25 down to 1 %, and on B 25/85 down to 1 % Suitable for wave or reflow soldering NiSn terminations Fully glass coated Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 2.2 kω to 470 kω Tolerance on R 25 - value ± 2 %; ± 3 %; ± 5 %; ± 10 % Tolerance on B 25/85 - value see table below Maximum dissipation at 25 C 210 mw Thermal time constant τ 8s Operating temperature range - 40 to C R/T values see tables Climatic category 40/125/56 Mass g APPLICATIONS Temperature compensation, sensing and protection in, for example: Battery chargers Consumer equipment Office equipment DESCRIPTION Size 0805 chip thermistors with a negative temperature coefficient. The device has no marking. PACKAGING Available in 8 mm punched paper tape on reel package of 4000 units. ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) B 25/85 - VALUE (K) TOLERANCE ON B 25/85 Note 1. replace * in 12NC by 3 for 5 %, 6 for 3 %, 4 for 2 % 2. replace * in SAP part no by J for 5 %, H for 3 %, G for 2 %, F for 1 % tolerance on R 25 C 12NC ORDERING CODE SAP MATERIAL NO ) NTCS0805E3... 2) ± 1 * *MT ± 1 * *MT ± 3 * *MT ± 1 * *MT ± 1 * *HT ± 1 * *HT ± 1 * *HT ± 1 * *XT ± 1 * *XT ± 1 * *HT ± 1 * *XT ± 1 * *XT Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 27

33 /NTCS0805E3...T Surface Mount, NTC Thermistors DIMENSIONS in millimeters L 1 W T L 2 and L 3 MIN. L 4 MIN. T W 2.0 ± ± ± L2 L4 L1 L3 JW165 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2.2 kω CATALOG NUMBER *222 OR SAP NO. NTCS0805E3222*MT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

34 /NTCS0805E3...T Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4.7 kω CATALOG NUMBER *472 OR SAP NO. NTCS0805E3472*MT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 10 kω CATALOG NUMBER *103 OR SAP NO. NTCS0805E3103*MT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 29

35 /NTCS0805E3...T Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 10 kω CATALOG NUMBER *103 OR SAP NO. NTCS0805E3103*MT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 15 kω CATALOG NUMBER *153 OR SAP NO. NTCS0805E3153*MT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

36 Surface Mount, NTC Thermistors /NTCS0805E3...T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 15 kω CATALOG NUMBER *153 OR SAP NO. NTCS0805E3153*MT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 22 kω CATALOG NUMBER *223 OR SAP NO. NTCS0805E3223*HT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 31

37 /NTCS0805E3...T Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 22 kω CATALOG NUMBER *223 OR SAP NO. NTCS0805E3223*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 33 kω CATALOG NUMBER *333 OR SAP NO. NTCS0805E3333*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω CATALOG NUMBER *473 OR SAP NO. NTCS0805E3473*HT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

38 Surface Mount, NTC Thermistors /NTCS0805E3...T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω CATALOG NUMBER *473 OR SAP NO. NTCS0805E3473*HT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω CATALOG NUMBER *683 OR SAP NO. NTCS0805E3683*XT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 33

39 /NTCS0805E3...T Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω CATALOG NUMBER *683 OR SAP NO. NTCS0805E3683*XT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 100 kω CATALOG NUMBER *104 OR SAP NO. NTCS0805E3104*XT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

40 Surface Mount, NTC Thermistors /NTCS0805E3...T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 100 kω CATALOG NUMBER *104 OR SAP NO. NTCS0805E3104*XT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 330 kω CATALOG NUMBER *334 OR SAP NO. NTCS0805E3334*HT ΔR/R DUE TO B-TOLERANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 35

41 /NTCS0805E3...T Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 470 kω CATALOG NUMBER *474 OR SAP NO. NTCS0805E3474*XT ΔR/R DUE TO B-TOLERANCE RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 680 kω CATALOG NUMBER *684 OR SAP NO. NTCS0805E3684*XT ΔR/R DUE TO B-TOLERANCE For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

42 Surface Mount, NTC Thermistors /NTCS0805E3...T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 680 kω CATALOG NUMBER *684 OR SAP NO. NTCS0805E3684*XT ΔR/R DUE TO B-TOLERANCE SOLDERING CONDITIONS This SMD thermistor is only suitable for wave or reflow soldering, in accordance with CECC The maximum temperature of 260 C during 40 s should not be exceeded. Typical examples of a soldering processes that will provide reliable joints without damage, are shown below. Temperature C 245 C 215 C 180 C 130 C Reflow Soldering 2 K/s 10 s 10 s 40 s Time (s) 250 Temperature Dimensions of the solder lands 1.3 Lead (Pb)-free Reflow Soldering Profile 260 C 245 C 235 C 170 C 2 K/s max 120 C Time (s) 40 s max 20 s min 60 s 6 K/s max 50 limit normal Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 37

43 /NTCS0805E3...T Surface Mount, NTC Thermistors PACKAGING TAPE SPECIFICATIONS All tape specifications are in accordance with IEC Basic dimensions are given below. Carrier tape material is paper. PAPEAPE P 0 T D 0 P 2 E 1 F W B 0 A 0 P 1 T 1 PAPEAPE DIMENSIONS IN MILLIMETERS PARAMETER DIMENSION TOLERANCE A 0 ; note ± 0.2 B 0 ; note ± 0.1 W 8.0 ± 0.2 E ± 0.1 F 3.5 ± 0.05 D ± 0.05 P 0 ; note ± 0.1 P ± 0.1 P ± 0.05 T tape thickness 1.1 max T 1 cover tape < Note 1. Measured 0.3 mm above base pocket 2. P 0 pitch cumulative error over any 10 pitches ± 1.0 mm LEADER/TRAILEAPE SPECIFICATION trailer end Leader/trailer tape empty compartments with cover tape (min. 240 mm) leader end cover tape only trailer (min. 160 mm) TAPING PACKAGE REQUIREMENTS Component is free and not sticking to top and/or bottom tape. Component should be easy to remove from carrier tape. TESTS AND REQUIREMENTS leader 400 mm SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT IEC TEST METHOD 6 Tc TEST PROCEDURE REQUIREMENTS solderability 2 s at 235 C min. 95 % of surface wetted resistance to soldering heat 10 s at 260 C ΔR/R < 5 % For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

44 NTC Thermistors, Surface Mount Chip NTHS Vishay FEATURES Solderable terminations Wraparound terminations Allows design flexibility for use with hybrid circuitry High-density monolithic construction NTHS PRODUCT R25 C VALUE RANGE BY CURVE AVAILABILITY CURVE NTHS-0402 NTHS-0603 NTHS-0805 NTHS-1206 NTHS-1012 % TOLERANCE AVAILABILITY 3 N/A %, 10 % 6 4.7K - 5.0K 2K - 3.5K 1.5K - 2.8K 1.5K - 3.5K %, 10 % 2 10K - 12K 6.8K - 12K 4.7K - 10K 4.7K - 10K 1.3K - 4.3K 3 %, 5 %, 10 % 10 18K - 25K 10K - 20K 6K - 12K 10K - 20K 4.5K - 7K 3 %, 5 %, 10 % 11 30K - 34K 22K - 32K 12K - 30K 20K - 33K 9K - 13K 3 %, 5 %, 10 % 5 47K - 50K 32K - 50K 35K - 50K 30K - 44K 15K - 20K 3 %, 5 %, 10 % 1 68K - 100K 32K - 100K 33K - 100K 32K - 70K 10K - 30K 1 % to 10 % K 150K - 200K 100K - 200K 100K - 200K 30K - 93K 3 %, 5 %, 10 % 4 350K 200K - 220K 200K - 220K 200K - 330K 93K - 140K 3 %, 5 %, 10 % GLOBAL PA RT NUMBER INFORMA TION New Global Part Numbering: NTHS1206N02N1002JR (preferred part numbering format) N T H S N 0 2 N J R GLOBAL CONDUCT OR CUR VE CHARACTERISTIC RESIST ANCE TO LERANCE PA CKAGIN G MODEL TYPE V ALUE CODE NTHS0402 Nickel Barrier 01 N 1002 = 10K F = ± 1 % F = Lead (Pb)-free, Bulk NTHS J = ± 5 % E = Lead (Pb)-free, 03 NTHS0805 K = ± 10 % T/R (Full) NTHS1206 NTHS P = Ti n/lead, Bul k R = Ti n/lead T/R (Full) Historical Part Number example: NTHS1206N02N1002JR (will continue to be accepted) NTHS1206 N 02 N 1002 J R HIST ORICAL CONDUCT OR CUR VE CHARACTERISTIC RESIST ANCE TO LERANCE PA CKAGIN G MODEL TYPE V ALU E Document Number: Revision 06-Oct-06 For technical questions, contact: thermistor1@vishay.com 39

45 NTHS Vishay NTC Thermistors, Surface Mount Chip DIMENSIONS in inches [millimeters] BW L W PART NUMBER L W BW NTHS-0402 NTHS-0603 NTHS-0805 NTHS-1206 NTHS ± ± ± [1.016 ± 0.102] [0.5 ± 0.051] [0.25 ± 0.102] ± ± ± [1.6 ± 0.20] [0.80 ± 0.20] [0.25 ± 0.15] ± ± ± [2.00 ± 0.20] [1.25 ± 0.20] [0.30 ± 0.15] ± ± ± [3.20 ± 0.20] [1.60 ± 0.20] [0.46 ± 0.20] ± ± ±0.008 [2.50 ± 0.20] [3.20 ± 0.20] [0.46 ± 0.20] TYPICAL PRODUCT RTC CHARACTERISTICS CURVE NTC%/ C at + 25 C Beta + 25 C/+ 75 C Beta Tolerance is ± 3 % 40 For technical questions, contact: thermistor1@vishay.com Document Number: Revision 06-Oct-06

46 Surface Mount, NTC Thermistors /NTCS0805E4... FEATURES REMARK Non preferred type (replaced by /NTCS0805E3...T) QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 2 to 470 kω Tolerance on R 25 - value 1) ± 5 % Tolerance on B 25/85 - value see Electrical Data and Ordering Information Maximum dissipation at 25 C 210 mw Thermal time constant τ 10 s Operating temperature range - 55 to C R/T values see tables Climatic category 40/125/56 Mass g Note 1. Tighter tolerances are available upon request from 6 to 2 %/K even at high temperatures Tolerance on B 25/85 down to 1 % AgPd terminations Suitable for wave or reflow soldering Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature compensation, sensing and protection in, for example: Battery chargers Consumer equipment Office equipment DESCRIPTION Size 0805 chip thermistors with a negative temperature coefficient. The device has no marking. PACKAGING Available in 8 mm punched paper tape on reel package of 4000 units. SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT TEST IEC TEST PROCEDURE REQUIREMENTS METHOD solderability 3 s at 215 C; 2 s at 235 C ΔR/R < 5 % 6 T C resistance to soldering heat 10 s at 260 C ΔR/R < 5 % ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) TOLERANCE ON R 25 C B 25/85 - VALUE (K) TOLERANCE ON B 25/85 12NC ORDERING CODE SAP MATERIAL NO. NTCS0805E4... 1) 2 5 % 3680 ± JMT % 3680 ± JMT % 3560 ± JMT 10 5 % 3620 ± JMT 15 5 % 3528 ± JMT 22 5 % 3930 ± JHT 33 5 % 3960 ± JHT 47 5 % 4090 ± JXT 68 5 % 3740 ± JMT % 3650 ± JMT % 4015 ± JXT % 4130 ± JXT Note 1. Replace digit Y in SAP part no by J for 5 % Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 41

47 /NTCS0805E4... Surface Mount, NTC Thermistors DIMENSIONS in millimeters T W L 1 W T MAX. L 2 AND L 3 MIN. L 4 MIN. 2.0 ± ± ± L 2 L 4 L 3 L 1 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2000 Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4202JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

48 Surface Mount, NTC Thermistors /NTCS0805E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2200 Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4222JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4700 Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4472JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 43

49 /NTCS0805E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4700 Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4472JMT % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4103JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

50 Surface Mount, NTC Thermistors /NTCS0805E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4103JMT % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4153JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 45

51 /NTCS0805E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4153JMT % TOL. ΔR/R RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4223JHT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) 5 % TOL. ΔT (K) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

52 Surface Mount, NTC Thermistors /NTCS0805E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4333JHT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4473JXT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 47

53 /NTCS0805E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4473JXT % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4683JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

54 Surface Mount, NTC Thermistors /NTCS0805E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4683JMT % TOL. ΔR/R 5 % TOL. ΔT (K) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4104JMT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 49

55 /NTCS0805E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4104JMT % TOL. ΔR/R RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4334JXT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) 5 % TOL. ΔT (K) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

56 Surface Mount, NTC Thermistors /NTCS0805E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NUMBER OR SAP NO. NTCS0805E4474JXT 5 % TOL. ΔR/R 5 % TOL. ΔT (K) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 51

57 /NTCS0603E4... Surface Mount, NTC Thermistors FEATURES from 6 to 2 %/K even at high temperatures AgPd terminations Suitable for wave or reflow soldering Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC REMARK Non preferred type (replaced by /NTCS0603E3...) QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 4.7 kω to 100 kω Tolerance on R 25 - value ± 5 % Tolerance on B 25/85 - value see Electrical Data and Ordering Information Maximum dissipation at 25 C 125 mw Thermal time constant τ 8s Operating temperature range - 55 to C R/T values see tables Climatic category 40/125/56 Mass g APPLICATIONS Temperature compensation, sensing and protection in, for example: Battery chargers Consumer equipment Office equipment DESCRIPTION Size 0603 chip thermistors with a negative temperature coefficient. The device has no marking. PACKAGING Available in 8 mm punched paper tape on reel package of 4000 units. SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT IEC TEST METHOD TEST PROCEDURE REQUIREMENTS solderability 3 s at 215 C; 2 s at 235 C ΔR/R < 5 % 6 T C resistance to soldering heat 10 s at 260 C ΔR/R < 5 % ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) TOLERANCE ON R 25 C B 25/85 - VALUE (K) TOLERANCE ON B 25/85 12NC ORDERING CODE SAP MATERIAL NO. NTCS0603E % 3560 ± JMT 10 5 % 3620 ± JMT 47 5 % 3977 ± JHT 68 5 % 3740 ± JMT % 3650 ± JMT Note: R 25 - values, B 25/85 - values and catalog numbers. See Resistance Values Tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

58 Surface Mount, NTC Thermistors /NTCS0603E4... DIMENSIONS in millimeters T W L 1 W T MAX. L 2 AND L 3 MIN. L 4 MIN. 1.6 ± ± L 2 L 4 L 3 L 1 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 4700 Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4472JMT 5 % TOL. ΔR/R Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 53

59 /NTCS0603E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4103JMT 5 % TOL. ΔR/R RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4473JHT For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06 5 % TOL. ΔR/R

60 Surface Mount, NTC Thermistors /NTCS0603E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4473JHT RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep CATALOG NO OR SAP NO. NTCS0603E4683JMT 5 % TOL. ΔR/R 5 % TOL. ΔR/R

61 /NTCS0603E4... Surface Mount, NTC Thermistors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4683JMT For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06 5 % TOL. ΔR/R RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT Ω /R 25 CATALOG NO OR SAP NO. NTCS0603E4104JMT 5 % TOL. ΔR/R

62 Model Numbers Global Part Numbering Information NTC /8..../ NTCLG100E & / NTCSMELFE3.... T Glass Encapsulated

63 Global Part Numbering Information NTC Glass Encapsulated GENERAL ORDER INFORMATION PART NUMBER: NTC L G100 E2 103 J B N T C L G E J B PRODUCT FAMILY NTC EXECUTION TYPE RoHS COMPLIANCE L = leaded G100 = TERMINATION TYPE glass lead MELF = without leads E2 = SnCu E3 = Sn R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values TOLERANCE ON R25 F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % PACKAGING B = bulk T0 = tape PRODUCT DESCRIPTION: RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 633 = glass encapsulated TYPE 5 = SMD MELF 8 = leaded glass in bulk 3 = leaded glass on tape TOLERANCE ON R25 3 = 5 % 2 = 10 % R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 22-Sep-06

64 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors FEATURES QUICK REFERANCE DATA VALUE PARAMETER Temperature range - 40 to C Resistance value at 25 C (R 25 ) 10 to 220 kω Tolerance on R 25 - value ± 5 % and ± 10 % B 25/85 - value 3977 K Tolerance on B 25/85 - value ± 1.3 % Deviation in resistance value due to B-tolerance Ratio /R 25 Rated dissipation Dissipation factor Response time Thermal time constant τ Temperature coefficient see Resistance Values at Intermediate Temperatures table for series see Resistance Values at Intermediate Temperatures table for series 100 mw 2.5 mw/k 0.9 s 6s see Resistance Values at Intermediate Temperatures table for series see Resistance Values at Intermediate Temperatures table for series Climatic category 40/155/56 40/200/56 Mass 0.03 g 0.14 g Small diameter down to 1.7 mm Quick response time down to 0.9 s Wide temperature range from - 40 to C Resistant to corrosive atmospheres and harsh environments Old part number was /5/8... Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Available in bulk or on tape APPLICATIONS High temperature measurement control: Domestic appliances Automotive systems Industrial process control DESCRIPTION These thermistors have a negative temperature coefficient and are mounted in a glass envelope: (SOD80) without leads and suitable for surface mounting (SOD27) with tinned copper-clad iron leads is the bandoiler version of series MOUNTING By soldering ELECTRICAL DATA AND ORDERING INFORMATION R 25 12NC ORDERING CODE SAP MATERIAL NO. 12NC ORDERING CODE SAP MATERIAL NO. B (kω) 25/85 - VALUE /8... 1) NTCLG100E2... 2) ) NTCSMELFE3... 2) K ± 1.3 % * *B * *T K ± 1.3 % * *B * *T K ± 1.3 % * *B * *T K ± 1.3 % * *B * *T K ± 3.0 % * *B - - Note 1. replace * in 12NC by 3 for 5 %, 2 for 10 % tolerance on R 25 C, the digit 8 stands for bulk components, the digit 3 stands for taped components 2. replace * in SAP part no by J for 5 %, K for 10 % tolerance on R 25 C, the digit B stands for bulk components, for taped components replace B by TO Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 59

65 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors DIMENSIONS in millimeters Component outline for (SOD27) Component outline for (SOD80) O 1.85 max O 0.56 max O 1.7 max 25.4 min 4.25 max 25.4 min max DERATING Derating curve for series Derating curve for series P 100 P T amb T amb STABILITY AND R-T CHARACTERISTICS Stability of glass encapsulated NTCs after thermal shock test ΔR R ΔT (25 K) 0 ΔT (K) ΔT (85 K) 0.4 ΔR 85 /R 85 ΔR 25 /R cycles For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

66 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors STABILITY AND R-T CHARACTERISTICS 10 4 R kω 20 kω 10 kω 100 kω RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES FOR /NTCSMELFE T /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) for /NTCSMELFE2 (see note 1) 5.103/103.T 5.203/203.T 5.303/303.T 5.104/104.T Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 61

67 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES FOR /NTCLG100E2... /R 25 ΔR DUE TO B-TOLERANCE FOR 103/203/303/104 Note 1. Replace dot according to the following rule and depending on requested tolerance on R 25 C: a) for 12NC 3 for 5 % and 2 for 10 % tolerance b) for SAP ordering code J for 5 % and K for 10 % tolerance R (kω) for /NTCLG100E2 (see note 1) 8.103/103.T 8.203/203.T 8.303/303.T 8.104/104.T For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

68 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES FOR /NTCLG100E2224T /R 25 ΔR DUE TO B-TOLERANCE FOR 224 RESISTANCE Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 63

69 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors PACKAGING BLISTEAPE AND REEL ( ) Blister tape A 0 5 max K K 0 T 1 W 1 B 1 B 0 D 1 W F E D0 P P 2 δ δ P 0 T Direction of unreeling Reel t W O U E C B A trailer leader fixing tape BLISTEAPE AND REEL DIMENSIONS SYMBOL PARAMETER NOMINAL DIMENSIONS TOLERANCE UNIT Blister tape K overall thickness < mm POCKET A 0 length mm B 0 width > mm K 0 depth mm B 1 outside width < mm For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

70 /8.../NTCLG100E2... & /NTCSMELFE3...T NTC Thermistors, High Temperature Sensors BLISTEAPE AND REEL DIMENSIONS SYMBOL PARAMETER P pitch 4.0 ± 0.1 mm D 1 hole diameter 1.0 ± 0.1 mm FEED-HOLE D 0 diameter 1.5 ± 0.1 mm P 0 pitch 4.0 ± 0.1 mm E distance 1.75 ± 0.1 mm cumulative pitch error over 10 positions 0 ± 0.1 mm CENTRE LINE P 2 length 2.0 ± 0.05 mm F width 3.5 ± 0.1 mm FIXING TAPE W 1 width < mm T 1 thickness < mm CARRIEAPE mm W thickness 8.0 ± 0.2 mm δ bending < mm T thickness < mm Reel FLANGE A diameter mm t thickness mm W space between flanges 9.5 ± 0.5 mm HUB B diameter 62.0 ± 1.5 mm C spindle hole /- 0 mm KEY SLIT E width 2.0 ± 0.5 mm U depth 4.0 ± 0.5 mm O location THERMISTORS ON BANDOLIER ( ) 0.8 max NOMINAL DIMENSIONS TOLERANCE UNIT S 1.2 max MBC941 L1 L2 The components are centred so that L 1 -L 2 = 1.2 mm max. The cumulative space (S) measured over 10 spacings = 50 ± 2 mm Note The bandolier of a 180 mm reel contains at least 2500 devices with no more than 0.5 % empty positions. Three consecutive empty places may be found provided this gap is followed by 6 consecutive devices. The carrier tape starts (leader) and ends (trailer) with at least 75 empty positions (equivalent to 300 mm); the covering foil is at least 300 mm. In order to fix the carrier tape a self-adhesive tape of 20 to 50 mm width is applied. Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 65

71 66

72 Model Numbers Global Part Numbering Information NTC Leaded / NTCL202E /4/6.... / NTCLE100E3... B0/T1/T / NTCLE100E3... SB / NTCLE301E4C / / NTCLE... E3... SB / NTCLE201E3C M, C, T

73 Global Part Numbering Information NTC Leaded GENERAL ORDER INFORMATION PART NUMBER: NTC L E100 E3 103 J B0 N T C L E E J B 0 PRODUCT FAMILY NTC EXECUTION TYPE RoHS COMPLIANCE L = leaded E100 = TERMINATION TYPE epoxy Cu 0.6 mm color coding E101 = epoxy Cu 0.6 mm no color coding E202 = epoxy Ni 0.4 mm E300 = epoxy ETFE AWG30 wires E201 = epoxy Ni 0.3 mm E301 = epoxy PEEK AWG30 E3 = Sn E4 = silver R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values TOLERANCE ON R25 F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % PACKAGING B0 = bulk T1 = on TDK tape pitch 1e T2 = on TDK tape pitch 2e PRODUCT DESCRIPTION: RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 633 = sawn chip (R25 in E-series) 645 = sawn chip (R25 not in E-series) TYPE leaded epoxy 6 = Cu 0.6 mm color coding 5 = Ni 0.5 mm 4 = Cu 0.6 mm on tape 1e 3 = Cu 0.6 mm on tape 2e 10 = Ni 0.3 mm with special R25 tolerances 20 = insulated Ni 0.25 mm with special tolerances 0 = Cu 0.6 mm without coding TOLERANCE ON R25 5 = 1 % 4 = 2 % 6 = 3 % 3 = 5 % 2 = 10 % R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 22-Sep-06

74 NTC Thermistors, Accuracy Line /NTCL202E3... FEATURES Accurate over a wide temperature range (tolerance on B-value between 2.5 % and 0.5 %) Good stability over a long life Excellent price/performance ratio Flexible leads Low heat conductivity through 0.4 mm diameter Ni-leads Old part number was QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 2 to 470 kω Tolerance on R 25 - value ± 5 %; ± 3 %; ± 2 %; ± 1 % Tolerance on B 25/85 - value ± 2.5to0.5 % Maximum dissipation 100 mw Dissipation factor δ 2.2 mw/k Response time; note s Thermal time constant τ 13 s Operating temperature range at: zero dissipation (continuously) - 40 to C zero dissipation (for short 150 C maximum dissipation (100 mw) 0 to + 55 C Climatic category 40/125/56 Mass 0.11 g Notes 1. Response time in silicone oil MS200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 C in air to 85 C in oil. 2. Valid for all types with the exception of Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The device consists of a chip with two tinned nickel leads and is color coded. PACKAGING The thermistors are packed in cardboard boxes; the smallest packing quantity is 500 units. MARKING The thermistors are marked with colored bands; see Dimensions and Electrical data and ordering information MOUNTING By soldering in any position. ELECTRICAL DATA AND ORDERING INFORMATION R 25 12NC ORDERING CODE SAP MATERIAL NO. CODING (see dimensions) B (kω) 25/85 - VALUE NTCL202E3... I II K ± 0.5 % * *BO orange orange K ± 0.75 % * *BO red red K ± 0.75 % * *BO green green K ± 0.75% * *BO black white K ± 0.75 % * *BO blue blue K ± 2 % * *BO yellow yellow K ± 2 % * *BO white white K ± 1.5 % * *BO black black K ± 1.5 % * *BO grey grey K ± 1.5 % * *BO brown brown K ± 1.5 % * *BO violet violet Notes 1. replace * in 12NC by 3 for ± 5 %, 6 for ± 3 %, 4 for ± 2 %, 5 for ± 1 % 2. replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 69

75 /NTCL202E3... NTC Thermistors, Accuracy Line DIMENSIONS in millimeters 3.4 max. 3 max. DERATING AND LONG TERM STABILITY P 100 I II 2 ± max I II 40 ± T amb ± 0.04 Power derating curve LONG TERM STABILITY OF R 25 AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 C) ΔR 25 R Curves valid for 2.2 to 10 kω Curve 1: maximum deviation Curve 2: average deviation Curve 3: minimum deviation LONG TERM STABILITY OF T AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 C) 0.05 ΔT (K) Curves valid for 2.2 to 10 kω Curve 1: minimum deviation Curve 2: average deviation Curve 3: maximum deviation test duration (h) test duration (h) 10 4 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2 kω /R 25 ΔR DUE TO B-TOLERANCE R ; see note For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

76 NTC Thermistors, Accuracy Line /NTCL202E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 2 kω /R 25 ΔR DUE TO B-TOLERANCE R ; see note RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 2.7 kω, 4.7 kω, 5 kω & 10 kω /R 25 ΔR DUE TO B-TOLERANCE R ; see note Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 71

77 /NTCL202E3... NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 2.7 kω, 4.7 kω, 5 kω & 10 kω /R 25 ΔR DUE TO B-TOLERANCE R ; see note RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 12 kω AND 22 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

78 NTC Thermistors, Accuracy Line /NTCL202E3... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 47 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω AND 100 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 73

79 /NTCL202E3... NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω AND 100 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 470 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R ; see note Note 1. Replace dot in last 5 digits of catalog number by a number according to the following details and depending on tolerance on required R 25 - value: 4 for a tolerance of ± 2 %; 6 for a tolerance of ± 3 %; 3 for a tolerance of ± 5 %; 2 for a tolerance of ± 10 %. For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

80 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio Old part number was /4/6... Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 3.3 Ω to 470 kω Tolerance on R 25 - value ± 2 %; ± 3 %; ± 5 %; ± 10 % Tolerance on B 25/85 - value ± 0.5 % to ± 3 % Maximum dissipation 500 mw Dissipation factor δ (for information only) 7mW/K 8.5 mw/k (for to 689) 1.2 s Response time Thermal time constant τ 15 s (for information only) Operating temperature range: at zero dissipation; continuously - 40 to C at zero dissipation; for short periods 150 C at maximum dissipation (500 mw) 0 to 55 C Climatic category 40/125/56 Mass 0.3 g APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The device consists of a chip with two tinned solid copper-plated leads. It is grey lacquered and colour coded, but not insulated. PACKAGING The thermistors are packed in bulk or tape on reel; see code numbers and relevant packaging quantities. MARKING The thermistors are marked with coloured bands; see dimensions drawing and Electrical data and ordering information. MOUNTING By soldering in any position. ELECTRICAL DATA AND ORDERING INFORMATION UL R 25 B 25/85 - VALUE 12NC ORDERING CODE SAP MATERIAL NO. COLOR CODE APPROVED ) NTCLE100E3... 2) (K) (± %) (Y/N) I II III N * *B0 orange orange gold N * *B0 yellow violet gold N * *B0 blue grey gold N * *B0 brown black black N * *B0 brown green black N * *B0 red red black Y * *B0 orange orange black Y * *B0 yellow violet black Y * *B0 blue grey black N * *B0 brown black brown N * *B0 brown green brown N * *B0 red red brown N * *B0 orange orange brown N * *B0 yellow violet brown N * *B0 blue grey brown N * *B0 brown black red N * *B0 brown green red Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 75

81 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line ELECTRICAL DATA AND ORDERING INFORMATION R 25 B 25/85 - VALUE UL APPROVED 12NC ORDERING CODE SAP MATERIAL NO. COLOR CODE 3) ) NTCLE100E3... 2) (K) (± %) (Y/N) I II III N * *B0 red black red Y * *B0 red red red Y * *B0 red violet red Y * *B0 orange orange red Y * *B0 yellow violet red Y * *B0 green black red Y * *B0 blue grey red Y * *B0 brown black orange Y * *B0 brown red orange Y * *B0 brown green orange Y * *B0 red red orange N * *B0 orange orange orange N * *B0 yellow violet orange N * *B0 green black orange N * *B0 blue grey orange N * *B0 brown black yellow Y * *B0 brown green yellow Y * *B0 red red yellow N * *B0 orange orange yellow N * *B0 yellow violet yellow Notes 1. Replace * in 12NC by 2 for 10 %, 3 for 5 %, 6 for 3 %, 4 for 2 % 2. Replace * in SAP by K for 10 %, J for 5 %, H for 3 %, G for 2 % 3. For R 25 ± 2 % band IV is red, ± 3 % band IV is orange, ± 5 % band IV is gold and ± 10 % band IV is silver DIMENSIONS in millimeters B ΛΙ ΙΙΙ ΙΙ Ι H 2 H 1 T DERATING AND TEMPERATURE TOLERANCES P Power derating curve 100 L P d to T amb PHYSICAL DIMENSIONS FOR RELEVANT TYPE CODE NUMBER Bmax d MIN. H 1 H 2 MAX L P Tmax MAX to ± ± to ± ± ± ± For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

82 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE 3.0 ΔT (K) Curves valid for 2.2 to 10 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % Curve 4: ΔR 25/R 25 = 1 % (for series only) ΔT (K) Curves valid for 12 to 22 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % T T TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE ΔT (K) Curves valid for 33 to 47 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % Curve 4: ΔR 25/R 25 = 1 % (for series only) ΔT (K) Curves valid for 68 to 100 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % Curve 4: ΔR 25/R 25 = 1 % (for series only) T T TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE TEMPERATURE DEVIATION AS A FUNCTION OF THE AMBIENT TEMPERATURE ΔT (K) Curves valid for 150 to 220 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % ΔT (K) Curves valid for 330 to 470 kω Curve 1: ΔR 25/R 25 = 5 % Curve 2: ΔR 25/R 25 = 3 % Curve 3: ΔR 25/R 25 = 2 % T T Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 77

83 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line VALUE AND TOLERANCE These thermistors have a narrow tolerance on the B-value, the result of which provides a very small tolerance on the nominal resistance value over a wide temperature range. For this reason the usual graphs of R = f(t) are replaced by Resistance Values at Intermediate Temperatures Tables, together with a formula to calculate the characteristics with a high precision. FORMULAE TO DETERMINE NOMINAL RESISTANCE VALUES The resistance values at intermediate temperatures, or the operating temperature values, can be calculated using the following interpolation laws (extended Steinhart and Hart ): ( R(T) R ref e A + B T + B T2 + C T 3 ) (1) T (R) = R A 1 + B 1 ln C R 1 ln R + D ref R 1 ln R 1 ref R ref (2) where: A, B, C, D, A 1, B 1, C 1 and D 1 are constant values depending on the material concerned; see table below. R ref is the resistance value at a reference temperature (in this event 25 C). T is the temperature in K. Formulae numbered and are interchangeable with an error of max C in the range 25 C to 125 C and max C in the range - 40 C to + 25 C. DETERMINATION OF THE RESISTANCE/TEMPERATURE DEVIATION FROM NOMINAL VALUE The total resistance deviation is obtained by combining the R 25 -tolerance and the resistance deviation due to B-tolerance. When: X=R 25 -tolerance Y = resistance deviation due to B-tolerance Z = complete resistance deviation, then: Z X Y = 1 + or Z X+Y % 100 When: = temperature coefficient ΔT = temperature deviation, Z then: ΔT = The temperature tolerances are plotted in the graphs on the previous page. Example: at 0 C, assume X = 5 %, Y = 0.89 % and = 5.08 %/K (see Table ), then: 5 Z = % = { } 100% = % ( 5.93% ) Z 5.93 ΔT = = = C ( 1.17 C) 5.08 PARAMETER FOR DETERMINING NOMINAL RESISTANCE VALUES NUMBER B 25/85 (K) NAME TOL. B VALUE % A B (K) C (K 2 ) A NTC with a R 25 - value of 10 kω has a value of kω between and C mat O. with Bn = 2880K E E E E E mat P. with Bn = 3990K E E E E E mat Q. with Bn = 3041K E E E E E mat R. with Bn = 3136K E E E E E mat S. with Bn = 3390K E E E E E ) mat.i E E E E E ) with Bn = 3528K E E E E E mat.h with Bn = 3560K E E E E E mat.b with Bn = 3740K E E E E E mat A. with Bn =3977K E E E E E mat.c with Bn = 4090K E E E E E mat.d with Bn = 4190K E E E E E mat.e with Bn = 4370K E E E E E mat.f with Bn = 4570K E E E E E-07 Notes 1. Temperature < 25 C 2. Temperature 25 C For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06 D (K 3 ) A 1 B 1 (K 1 ) C 1 (K 2 ) D 1 (K 3 )

84 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 79

85 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables R ; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

86 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables R ; see note 1 at end of tables Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 81

87 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables R ; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

88 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables R ; see note 1 AT END OF TABLES Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 83

89 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

90 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables R ; see note 1 at end of tables Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 85

91 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R ; see note 1 at end of tables R 25 (kω) ; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

92 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 87

93 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

94 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω AND 100 kω T AMB /R 25 /R 25 ΔR DUE TO B-TOLERANCE ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables R 25 (kω) ; see note 1 at end of tables Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 89

95 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 68 kω AND 100 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R 25 AT 470 kω T AMB /R 25 ΔR DUE TO B-TOLERANCE R 25 (kω) ; see note 1 at end of tables Note to Resistance Values At Intermediate Temperature Tables 1. Replace dot in last 5 digits of catalog number by a number according to the following details and depending on tolerance on required R 25 - value: 4 for a tolerance of ± 2 %; 6 for a tolerance of ± 3 %; 3 for a tolerance of ± 5 %; 2 for a tolerance of ± 10 %. For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

96 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line PACKAGING TAPE SPECIFICATIONS Thermistors on tape P T D Δ p Δ p Δ h Δ h O d H H 1 W 2 W 1 L W W 0 A D 0 P 0 P 1 F direction of unreeling detail A t 1E pitch DIMENSIONS OF TAPE IN ACCORDANCE WITH IEC SYMBOL PARAMETER DIMENSIONS (mm) VALUE TOLERANCE D body diameter 2) 3.3 ± 0.5 T maximum total thickness 3 - d lead diameter 0.6 ± 0.06 P pitch between thermistors 12.7 ± 1 P 0 feed-hole pitch (cumulative pitch error ± 0.2 mm/20 products) 12.7 ± 0.3 P 1 feed-hole centre to lead centre 5.08 ± 0.7 Δp component alignment 0 ± 1.3 F lead-to-lead distance 2.54 ± 0.3 Δh component alignment 0 ± 2 W tape width /- 0.5 W 0 hold-down tape width W 1 feed-hole position 9.0 ± 0.5 W 2 hold-down tape position 3 - H component to tape centre 22 1) ± 1 H 1 component height 32 - L length of snipped lead 11 - D 0 feed-hole diameter 4.0 ± 0.2 t total tape thickness with cardboard tape 0.5 ± 0.1 mm 0.65 ± 0.2 inspection level: S3 mechanical - 1 % Notes 1. Taped products with H = 45 ± 1, are available on request 2. D 5 max for to 221 Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 91

97 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line Thermistors on tape P T D Δ p Δ p Δ h Δ h 10 max W 2 O d W 1 L H 0 H W W 0 A D 0 F 2E pitch P 0 P 1 direction of unreeling detail A t DIMENSIONS OF TAPE IN ACCORDANCE WITH IEC SYMBOL PARAMETER DIMENSIONS (mm) VALUE TOLERANCE D body diameter 1) 3.3 ± 0.5 T maximum total thickness 2) d lead diameter 0.6 ± 0.06 P pitch between thermistors 12.7 ± 1 P 0 feed-hole pitch (cumulative pitch error ± 0.2 mm/20 products) 12.7 ± 0.3 P 1 feed-hole centre to lead centre 3.85 ± 0.7 Δp component alignment 0 ± 1.3 F lead-to-lead distance 5.08 ± 0.3 Δh component alignment 0 ± 2 W tape width /- 0.5 W 0 hold-down tape width W 1 feed-hole position /- 0.5 W 2 hold-down tape position 3 - H component to tape centre H 0 lead wire clinch height 16 ± 0.5 L length of snipped lead 11 - D 0 feed-hole diameter 4.0 ± 0.3 t total tape thickness with cardboard tape 0.5 ± 0.1 mm 0.7 ± 0.2 inspection level: S3 mechanical - 1 % Notes 1. D 5 max for to T 4 max for to For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 06-Oct-06

98 /4/6.../NTCLE100E3...B0/T1/T2 NTC Thermistors, Accuracy Line REEL SPECIFICATIONS Dimensions of the reel 3 18 CODE NUMBERS AND RELEVANT PACKAGING QUANTITIES PARAMETER BULK / NTCLE100E3...B0 Quantity 500 Note TAPE AND REEL 1) 1E pitch / NTCLE100E3...T per reel, 2 reels per box TAPE AND REEL 1) 2E pitch / NTCLE100E3...T per reel, 2 reels per box 1. The maximum number of emptz places per seel shall not exceed 0.1 % of the total number of components per reel. With no consecutive positions empty max CHARACTERISTICS OF TAPED PRODUCTS Minimum pull-out force of the component: 5 N Minimum peel-off force of adhesive tape: 6N Minimum tearing force tape: 15 N Minimum pull-off force of tape-reel: 5 N 42 ±1 56 max TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with IEC publication ; Environmental testing, except where indicated. STABILITY TESTS CECC CLAUSE IEC TEST METHOD Notes 1. For R kω the drift requirement is ΔR/R < 5 % 2. For R 25 from 2.2 kω to 10 kω, requirement is ± 2 % max STORAGE CONDITIONS Storage temperature range: - 25 to + 40 C Maximum relative humidity: 80 % TEST PROCEDURE REQUIREMENTS D3; endurance 25 C; 1000 hours ΔR/R < 1 % 1 endurance - 40 C; 1000 hours ΔR/R < 1 % 539 endurance 500 mw; 55 C; 1000 hours ΔR/R < 3 % 1) 2 dry heat, (steady state) 125 C; 1000 hours ΔR/R < 3 % D1; damp heat (steady state) 56 days at 40 C; 90 to 95 % RH ΔR/R < 3 % C2; rapid change of temperature - 40 C to C; 50 cycles ΔR/R < 2 % Other applicable tests robustness of leads: 21 tensile strength loading force 10 N ΔR/R 1 % bending loading force 5 N 58 soldering: solderability 240 C max.; duration 4 s max. ΔR/R 1 % 2) resistance to heat 265 C max.; duration 5 s max. 27 impact free fall; 1 m ΔR/R 1 % 29 shock 490 m/s; half sinewave ΔR/R 1 % 45 resistance to solvent (isopropanol) 6 vibration ambient temp for 5 min; 5 N with hydrophylic cotton wool 1.5 mm peak to peak: 10 to 58 Hz 10 gp: 50 to 500 Hz 1 octave/min. 2 hours in each direction in three orthogonal directions no traces of lacquer on cotton wool no visible damage ΔR/R < 1 % 2 inflammability 1980, needle flame test non-flammable Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 06-Oct-06 93

99 /NTCLE100E3...SB0 NTC Thermistors, Special Accuracy FEATURES Excellent accuracy between 25 C and 85 C High stability over a long life. Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature sensing and control. QUICK REFERENCE DATA PARAMETER VALUE Resistance at 25 C 1) 4.7 to 100 kω Temperature measurement accuracy (between 25 C and 85 C) ± 0.5 C Climatic category 40/125/56 Maximum dissipation 250 mw Dissipation factor δ (for information only) 7 mw/k Response time (for information only) 2) 1.2 s Thermal time constant τ (for information only) 11 s Operating temperature range: at zero dissipation (continuously) - 40 to C at maximum dissipation 0 to + 55 C Mass 0.22 g Notes 1. For values of nominal resistance value and tolerance at intermediate temperatures; see resistance values tables. 2. Response time in silicone oil MS 200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 C in air to 85 C in oil. DESCRIPTION These thermistors have a negative temperature coefficient. The device consists of a chip with two tin-plated copper leads. It is grey lacquered and not insulated. These thermistors are very accurate (± 0.5 C) over a trajectory from 25 C to85 C. PACKAGING The thermistors are packed in cardboard boxes, each box contains 500 units. MARKING Grey lacquered body. MOUNTING By soldering in any position. ELECTRICAL DATA AND ORDERING INFORMATION R 25 ΔR 25 /R 25 R 85 ΔR 85 /R 85 B25/85 (K) ΔB/B CATALOG NUMBER SAP MATERIAL NO. NTCLE100E SB SB SB SB0 For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 14-Sep-06

100 NTC Thermistors, Special Accuracy /NTCLE100E3...SB0 DIMENSIONS in millimeters 3.3 ± max. 2 ± 1 3 max. TOLERANCE CURVE ΔT (K) min T Ø 0.6 RESISTANCE VALUES AT INTERMEDIATE VALUES ( ) /R 25 R 25 (kω) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 14-Sep-06 95

101 /NTCLE100E3...SB0 NTC Thermistors, Special Accuracy RESISTANCE VALUES AT INTERMEDIATE VALUES ( ) /R 25 R 25 (kω) RESISTANCE VALUES AT INTERMEDIATE VALUES ( ) /R 25 R 25 (kω) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 14-Sep-06

102 NTC Thermistors, Special Accuracy /NTCLE100E3...SB0 RESISTANCE VALUES AT INTERMEDIATE VALUES ( ) /R 25 R 25 (kω) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 14-Sep-06 97

103 /NTCLE301E4C90059 NTC Thermistors, Long Insulated Leads FEATURES Long and flexible leads for special mounting or assembly requirements Insulated leads for prevention of short circuits Electrical features of accuracy line sensors Small diameter Old part number was Components in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at: 0 C 9000 Ω 25 C 2769 Ω Tolerance on R 25 - value: 0 C ± 2 % 25 C ± 3.82 % B 25/85 - value 3977 K APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The device consists of a chip with two insulated nickel leads. PACKAGING The thermistors are packed in cardboard boxes; the smallest packing quantity is 1000 units. MARKING The body is coated with ochre-colored epoxy lacquer and is not marked. MOUNTING By soldering in any position Maximum dissipation 100 mw DIMENSIONS in millimeters Dissipation factor δ Minimum dielectric withstanding voltage (RMS) between leads and coating 1.35 mw/k 500 V 2.0 min 2.5 max 2.0 min 2.5 max Response time Operating temperature range: 1.25 s 6.0 ± 1 at zero power - 40 to C 110 ± 3 at maximum power 0 to + 55 C Climatic category 40/125/56 Mass 0.16 g Ø 0.58 max 5 ± 2 Ø For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

104 /NTCLE301E4C90059 NTC Thermistors, Long Insulated Leads RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE RESISTANCE TOLERANCE ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 9.22 Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep-06 99

105 /20.../NTCLE...E3...SB0 NTC Thermistors, Long Lead Sensors QUICK REFERENCE DATA PARAMETER VALUE Resistance value at: 0 C see Resistance Values Table 50 C see Resistance Values Table B 25/85 - value 3977 K ΔT ensured between 0 C and 50 C ± 0.5 C Temperature coefficient see Resistance Values Table Maximum dissipation 100 mw Minimum dielectric withstanding voltage (RMS) 500 V between leads and coating Operating temperature range - 40 to C Climatic category 40/125/56 Mass 0.2 g FEATURES Accuracy of 0.5 C between 0 C and 50 C Small diameter High stability over a long life Long and flexible leads for special mounting or assembly requirements Old part number was /20... Components in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The device consists of a chip with two insulated or non-insulated nickel leads. PACKAGING The thermistors are packed in cardboard boxes; the smallest packing quantity is 1000 units. MARKING The body is colored with ochre lacquer and not marked. MOUNTING By soldering in any position. ELECTRICAL DATA AND ORDERING INFORMATION R 25 - VALUE (kω) DIMENSIONS in millimeters B 25/85 - VALUE (K) 12NC ORDERING CODE SAP MATERIAL NO. NTCLE201E SB SB SB0 R 25 - VALUE (kω) B 25/85 - VALUE (K) 12NC ORDERING CODE SAP MATERIAL NO. NTCLE300E SB SB SB Component outline for /NTCLE201E3... series Component outline for /NTCLE300E3... series 2.4 max 2.4 max 2.4 max 8 max 0.3 ± ± max 8 max 0.58 max 38 ± ± ± 1 For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

106 /20.../NTCLE...E3...SB0 NTC Thermistors, Long Lead Sensors DERATING P 100 Power derating curve o T amb ( C) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔT (K) R 25 -VALUE (kω) (NTCLE201E3...SB0) OR (NTCLE300E3...SB) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep

107 /NTCLE201E3C90028 NTC Thermistors, Long Non-Insulated Leads FEATURES Long and flexible leads for special mounting or assembly requirements Small diameter Old part number was Components in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER Resistance value at 25 C VALUE 10 kω APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The device consists of a chip with two tinned nickel leads. Tolerance on R 25 - value ± 5 % B 25/100 - value 3993 K Tolerance on B 25/100 - value ± 1.2 % Rated dissipation 100 mw Dissipation factor τ 1.4 mw/k Operating temperature range: at zero dissipation - 40 to C at maximum dissipation 0 to + 55 C Mass 0.16 g DIMENSIONS in millimeters PACKAGING The thermistors are packed in cardboard boxes; each box containing 1000 units (10 plastic bags, each containing 100 units). MARKING The body of the device is coated with a yellow colored EPQ lacquer. MOUNTING By soldering in any position DERATING 2.5 max. 2.5 max. P max. 110 ± 5.0 Ø 0.3 ± T amb Power derating curve For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 20-Jun-06

108 /NTCLE201E3C90028 NTC Thermistors, Long Non-Insulated Leads RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES RESISTANCE RESISTANCE TOLERANCE ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 20-Jun

109 M, C, T Vishay Dale NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors for standard PC board mounting or assembly in probes. The coating is baked-on phenolic for durability and long-term stability. Models M and C have tinned solid copper leads. Model T has solid nickel wires with Teflon insulation to provide isolation when assembled in metal probes or housings. DIMENSIONS in inches [millimeters] TINNED COPPER WIRE TEFLON INSULATED NICKEL WIRE 1/4 NOM. BODY DIA. MAX. BODY DIA. MAX. 1.5 [36.1] MIN. CLEAN LEAD LENGTH 3 ± 0.25 [76.2 ± 6.4] LD DIAMETER WIRE SIZE Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254] GLOBAL PART NUMBER INFORMATION New Global Part Numbering: 01C2001FP (preferred part numbering format) 0 1 C F P CURVE GLOBAL MODEL RESISTANCE VALUE POINT MATCH TOLERANCE PACKAGING 01 C 2001 = 2K F = ± 1 % F = Lead (Pb)-free, Bulk 02 M J = ± 5 % 03 P = Tin/Lead, Bulk T K = ± 10 % Historical Part Number example: 1C2001FP (will continue to be accepted) 01 C 2001 F P HISTORICAL CURVE GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: 01C2001SPC3 (preferred part numbering format) 0 1 C S P C 3 CURVE GLOBAL MODEL RESISTANCE VALUE CHARACTERISTICS PACKAGING CURVE TRACK TOLERANCE* 01 C 2001 = 2K S F = Lead (Pb)-free, Bulk A3 02 B3 M 03 P = Tin/Lead, Bulk C3 T A2 04 B2 07 C2 08 A4 09 B4 12 *See following pages for Tolerance A5 13 explanations and details. B5 C5 14 A8 17 B8 Historical Part Number example: 1C2001SPC3 (will continue to be accepted) C8 1 C 2001 S P C3 HISTORICAL CURVE GLOBAL MODEL RESISTANCE VALUE CHARACTERISTIC PACKAGING CURVE TRACK TOLERANCE For technical questions, contact: thermistor1@vishay.com Document Number: Revision 22-Sep-04

110 NTC Thermistors, Coated M, C, T Vishay Dale SELECTION GUIDE FOYPE M, C, AND T THERMISTORS R 25 CURVE NUMBER (Ohms) K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K 33K 39K 47K 50K 56K 68K 82K 100K 120K 150K 180K 220K 270K 330K 390K 470K 500K 560K 680K 820K 1 Meg NOTE: MAXIMUM BODY DIAMETER [3.2] [2.8] [2.4] DISSIPATION CONSTANT 2-3 mwatts/ C THERMAL TIME CONSTANT 6-14 Seconds 1. Intermediate resistance values between the standard value series are available. Size would be the same as the color grouping. 2. Other body diameters available. Bead diameter increases as Res. decreases. (Consult Factory) 3. Leaded series of thermistors includes additional styles: (Consult Factory) Type B: 26AWG lead, [0.40] Type F: 32AWG lead, [0.20] Type E: 24AWG lead, [0.51] Type D: 22AWG lead, [0.64] Type G: 20AWG lead, [0.81] Type H: 18AWG lead, [1.02] Document Number: Revision 22-Sep-04 For technical questions, contact: thermistor1@vishay.com 105

111 M, C, T Vishay Dale NTC Thermistors, Coated TOLERANCES AVAILABLE FOYPE M, C AND T THERMISTORS DESCRIPTION OF THERMISTOOLERANCES The many applications of thermistors have mandated the need for two basic tolerance schemes for these products - Curve Tracking and Point Match Thermistors. An example of the resistance tolerance at various temperatures for the two different tolerancing methods is described in the following graph: 10 ± 5 % POINT MATCH CURVE 9 8 TOLERANCE (± %) A2 25 C A8 A3 A5 A4 ± 1 C CURVE TRACK CURVE TEMPERATURE CURVE TRACKING TOLERANCE Thermistors are calibrated at the high temperature of the curve track range and then final tested at the low temperature of the curve track range. This ensures that the thermistor will meet the specified temperature accuracy at every temperature within the desired temperature range. Several temperature ranges are available and the accuracy of the thermistor may be ± 0.2 C, ± 0.5 C, and ± 1.0 C. The Curve Tracking temperature ranges and their code designators are shown in Figure 1 and Table 1. To specify, add the appropriate suffix from the following table to the part number. Example: 1M1002-B3 = Curve 1, 10 kilohms at + 25 C, curve tracking to ± 0.5 C from 0 C to + 70 C STANDARD ELECTRICAL SPECIFICATIONS FOR CURVE TRACKING THERMISTORS TEMP. RANGE 0 C to + 70 C - 20 C to + 50 C 0 C to C 25 C to + 90 C 0 C to + 50 C TOLERANCE ± 1 C ± 0.5 C ± 0.2 C ± 1 C ± 0.5 C ± 0.2 C ± 1 C ± 0.5 C ± 0.2 C ± 1 C ± 0.5 C ± 0.2 C ± 1 C ± 0.5 C ± 0.2 C PART NO. SUFFIX - A3 - B3 - C3 - A2 - B2 - C2 - A4 - B4 - C4 - A5 - B5 - C5 - A8 - B8 - C8 C 1 X X X X X X X X N/A X X X X X X U 2 X X X X X X X X N/A X X X X X X R 4 X X X X X X X X N/A X X X X X X V 8 X X X X X X X X N/A X X X X X X E 9 X X X X X X X X N/A X X X X X X For technical questions, contact: thermistor1@vishay.com Document Number: Revision 22-Sep-04

112 NTC Thermistors, Coated M, C, T Vishay Dale POINT MATCH TOLERANCE The standard leaded thermistors are calibrated and tested at 25 C to a tolerance of ± 5 % or ± 10 %; however, tighter tolerance, point matched thermistors are readily available as are special point match temperatures to fit your application. Since these thermistors have only one controlled point of reference (the point match temperature), the resistance at other temperatures is given by the "Resistance vs. Temperature Conversion Tables" for the appropriate material curve. The resistance value at any temperature is the ratio factor times the resistance at 25 C. Example: 1M1002-5, +70 C resistance = (Resistance factor for curve 1 at 70 C is ) X (10000 ohm resistance at 25 C) = 1990 ohms. The tolerance of the resistance at any temperature is described by Figure 2. FIGURE 2 POINT MATCH TOLERANCES VS. TEMPERATURE RESISTANCE MAX. R vs. T MIN. R vs. T NOMINAL R vs. T 25 C PIVOT POINT (CALIBRATION TEMPERATURE) Point match resistance tolerances at temperatures other than 25 ºC are not the same as the calibration temperature. This difference is presented in Figure 2. The tolerance at any given temperature is the point match tolerance + the MT ± % (Manufacturing Tolerance). The MT ± % may be obtained from the R vs. T Conversion tables and is added to the point match temperature, i.e., ± 1 % Tol. at 25 ºC + ± 2.6 % at - 30 ºC for Curve 1 equals a total tolerance of ± 3.6 % at - 30 ºC. TEMPERATURE COMPUTER AIDS FOHERMISTOR SELECTION A spreadsheet is available for the Vishay Thermistor Materials that calculates Beta, Steinhart-Hart Equation Constants A, B, and C, the resistance at any temperature based upon the Steinhart constants or Beta, the temperature equivalent of the resistance reading, and resistance temperature coefficients. This spread sheet will also calculate the total resistance tolerance of any point matched thermistor for temperatures in 10 ºC increments, and the resistance tolerance at any temperature within the calibrated range of curve tracking thermistors. Please contact factory if interested in this Excel spreadsheet. Document Number: Revision 22-Sep-04 For technical questions, contact: thermistor1@vishay.com 107

113 108

114 Model Numbers Global Part Numbering Information NTC Molded / NTCLM101E3.... B /98004/ NTCLM101E3C90004/

115 Global Part Numbering Information NTC Molded GENERAL ORDER INFORMATION PART NUMBER: NTC L M100 E3 103 J B0 N T C L M E J B 0 PRODUCT FAMILY NTC EXECUTION TYPE RoHS COMPLIANCE L = leaded M100 = TERMINATION TYPE molded range E3 = Sn R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values TOLERANCE ON R25 F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % PACKAGING B0 = bulk PRODUCT DESCRIPTION: RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 641 = molded TYPE 6 = leads 0.6 mm TOLERANCE ON R25 5 = 1 % 4 = 2 % 6 = 3 % 3 = 5 % 2 = 10 % R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 22-Sep-06

116 NTC Thermistors, Molded Range /NTCLM101E3...B0 FEATURES Excellent for surface temperature measurement Designed for harsh environments Based on the naked thermistor chips. Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature control. QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C (R 25 ) 2.2 to 470 kω Tolerance on R 25 - value ± 2 %, ± 3 %, ± 5 %, ± 10 % B 25/85 - values 3740 to 4570 K Maximum dissipation 250 mw Response time 2.7 s Operating temperature range: at zero dissipation - 40 to C at maximum dissipation 0 to 55 C Minimum dielectric withstanding voltage 350 V (RMS) between leads and lead insulation Minimum insulation resistance between 100 MΩ leads and lead insulation at 100 V (DC) Climatic category 40/125/56 Mass 0.3 g These thermistors have a negative temperature coefficient. The device consists of a moulded chip with two tin-plated solid nickel leads. The body color is white and the device is non-flammable. PACKAGING The smallest packing quantity is 500 units. MARKING White colored body. MOUNTING By soldering in any position or mechanical fixing. ELECTRICAL DATA AND ORDERING INFORMATION R 25 (kω) TC MASS (g) W (mm) H (mm) L (mm) P (mm) T (mm) ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B ± ± ± ± ± ± ± *B0 Note 1. R 25 - values, TC, mass, dimentions and catalog numbers. a) Other R 25 - values are available on request. 2. Replace dot in the code numbers by one of the following, depending on required R 25 - value: 4 for a tolerance of ± 2 % 6 for a tolerance of ± 3 % 3 for a tolerance of ± 5 % 2 for a tolerance of ± 10 % 3. Replace * by G for a tolerance of 2 %, H for 3 %, J for 5 % and K for 10 % D (mm) K B 25/85 TOL. SAP 12 NC (2) PART NO. NTCLM101E3 (3) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 26-Sep

117 /NTCLM101E3...B0 NTC Thermistors, Molded Range DIMENSIONS in millimeters DERATING P o T amb ( C) Power derating curve. Fig.1 Component outline. For dimensions see Electrical Data and Ordering Information Table RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE TC (1) For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 26-Sep-06

118 NTC Thermistors, Molded Range /NTCLM101E3...B0 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE TC (1) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE TC (1) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 26-Sep

119 /NTCLM101E3...B0 NTC Thermistors, Molded Range RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE TC (1) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE For technical questions, contact: Document Number: Revision: 26-Sep-06 TC (1)

120 NTC Thermistors, Molded Range /NTCLM101E3...B0 RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE TC (1) RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE Note 1. Replace dot in the code numbers by one of the following, depending on required R 25 - value: 4 for a tolerance of ± 2 % 6 for a tolerance of ± 3 % 3 for a tolerance of ± 5 % 2 for a tolerance of ± 10 % TC (1) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 26-Sep

121 /98004/NTCLM101E3C90004/98004 NTC Thermistors, Molded Range FEATURES Designed for harsh environments Excellent for surface temperature measurement Metal strip for heat conduction and easy mounting ( ) High accuracy at 100 C Minimum 350 V dielectric withstanding voltage Old part number was /98004 Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at: + 25 C 12 kω C 950 Ω Tolerance on R 25 - value: + 25 C ± 7 % C ± 5 % B 25/85 - value 3750 K Temperature coefficient %/K Maximum dissipation 0.25 W Dissipation factor 7 mw/k 9.5 mw/k when mounted on a heatsink; note 1 19 mw/k 27 mw/k Thermal time constant 19 s 33 s when mounted on a heatsink; note 2 10 s 5 s Heat capacity of ceramic (in air) J/K J/K when mounted on a heatsink 0.13 J/K 0.3 J/K Response time; note 2 3 s Operating temperature range: at zero dissipation - 10 to C at maximum dissipation 0 to + 55 C Dielectric withstanding voltage min. 350 V (RMS) between terminals and coating Insulation resistance between min. 100 MΩ terminals and coating at 100 V (DC) Mass 0.3 g 0.5 g Notes 1. Measurements made in still air with the thermistor mounted on a heatsink of 100 cm 2, thickness 1.5 mm, connected between phosphor-bronze wires ( 1.3 mm). 2. The thermistor being transferred from ambient air of + 25 C to a silicone oil (MS200/50) bath of 85 C. APPLICATIONS High temperature measurement control. DESCRIPTION Molded chip thermistor with negative temperature control and two solid tinned nickel leads. The body color is white and the device is non-flammable. The thermistor is provided with a metal strip for mounting. MARKING The thermistors are marked with a grey dot. MOUNTING : by soldering in any position : by means of the mounting strip. PACKAGING The thermistors are packed in cardboard boxes: : 500 units : 400 units DIMENSIONS in millimeters 4.4 ± ± ± ± ± ± ± ± ± 2 8 ± 0.2 Component outline ± ± 0.4 R 1.25 dia For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 27-Sep-06

122 Model Numbers /3/ / NTCSCWE NTC Assemblies NTC Thermistor Assemblies

123 /3/4... NTC Thermistors, Special Long Lead Sensors FEATURES Accurate over wide temperature range High stability Excellent price/performance ratio High adhesive strength between PVC wire and the encapsulating laquer Old part number was /3/4... QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C (R 25 ) 2.2 to 100 kω Tolerance on R 25 - value ± 3 % Tolerance on B 25/85 - value ± 1.5 or ± 0.75 % Maximum dissipation 250 mw Dissipation factor: mw/k mw/k mw/k Response time; note 1: s s s Operating temperature range: at zero dissipation - 40 to + 85 C at maximum dissipation 0 to + 50 C Climatic category 40/085/56 Lead wire; note 2 UL-2468.AWG24 wire Mass: g g g Notes 1. Response time in silicone oil MS 200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 C in air to 85 C in oil. 2. Wire length and wire type are optional on request. The products can be provided with a connector on request. 3. Tighter tolerances on R 25 are available upon request. Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature sensing and control These thermistors have a negative temperature coefficient. The epoxy-coated type ( ) consists of a chip with UL wire and is lacquered and insulated with black epoxy. The sleeved type ( ) and the brass-pipe type ( ) are suitable for application in various environmental conditions. MARKING UL mark on wire, no mark on body. PACKAGING The thermistors are packed in cardboard boxes; each box containing 500 pcs. ELECTRICAL DATA AND ORDERING INFORMATION R 25 (KΩ) B 25/85 - VALUE EPOXY-COATED TYPE CATALOG NUMBER (2) SLEEVED TYPE BRASS-PIPE TYPE K ± 0.75 % K ± 0.75 % K ± 0.75 % K ± 1.5 % K ± 1.5 % Notes 1. Other values based on the series are available on request. 2. The specified catalog numbers refer to products with L = 400 mm, without connector and adopt UL-2468.AWG24 wire. For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 12-Apr-05

124 NTC Thermistors, Special Long Lead Sensors /3/4... DIMENSIONS in millimeters Epoxy-coated type max 5 ± 2 L = 400 mm + 15/- 0 Other wire lengths available on request. 17 ± 3 L Sleeved type max 5 ± 2 L = 400 mm + 15/- 0 Other wire lengths available on request. 15 max 25 ± 5 L Brass-pipe type ± ± 2 L = 400 mm + 15/- 0 Other wire lengths available on request. 25 ± 0.5 L DERATING Power derating curve. P o T amb ( C) Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 12-Apr

125 /3/4... NTC Thermistors, Special Long Lead Sensors R-T CHARACTERISTICS RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES T AMB /R 25 ΔR DUE TO B-TOLERANCE TC R 25 (KΩ) /3/4...; see note 1 at end of tables RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES T AMB /R 25 ΔR DUE TO B-TOLERANCE TC R 25 (KΩ) /3/4...; see note 1 at end of tables For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 12-Apr-05

126 NTC Thermistors, Special Long Lead Sensors /3/4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES T AMB RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES R 25 ΔR DUE TO T AMB TC (KΩ) R T /R 25 B-TOLERANCE /3/4...; see note Note 1. Replace dot in last 5 digits of catalog number by a number according to the following details: a) 2 for epoxy-coated type b) 3 for water-resistant type c) 4 for brass-pipe type TESTS AND REQUIREMENTS STABILITY TESTS /R 25 ΔR DUE TO B-TOLERANCE IEC CECC TEST PROCEDURE DRIFT REQUIREMENT D3; endurance 85 C; 1000 hours ΔR/R < 5 % endurance - 40 C; 1000 hours ΔR/R < 5 % 539 endurance 250 mw; 55 C; 1000 hours ΔR/R < 5 % D1; 4.19 damp heat, steady state 56 days at 40 C; 90 to 95 % RH ΔR/R < 7 % C2; 4.14 rapid change of temperature - 40 to + 85 C; 50 cycles ΔR/R < 5 % Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 12-Apr TC R 25 (KΩ) /3/4...; see note 1 at end of tables

127 /NTCSCWE3... NTC Thermistors, Screw Threaded Sensors QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C 2.2 kω to 470 kω Tolerance on R 25 - value ± 5 % B 25/85 - value 3740 to 4570 K Dissipation factor; note 1 23 mw/k Thermal time constant; note s Operating temperature range at: zero dissipation - 40 to C maximum dissipation 0 to + 55 C Mass 1.5 g Min. dielectric withstanding voltage 1500 V ac (1 s) between terminals and Al. case Insulation resistance between min. 100 Mohm terminals and Al. case Note 1. Measured with screw mounted on an aluminium heatsink of 100 cm 2, thickness 1.5 mm, in still air at T amb =+ 25 C. 2. Other R 25 values based on series are available upon request. 3. Other tolerances on R 25 are available upon request. 4. Insulated leads available upon request. FEATURES Easy mounting Rugged construction Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Suitable for many applications, especially when a good electrical insulation and a good thermal contact with the chassis is required. Thermistor with negative temperature coefficient and two solid tinned copper leads. The device is mounted in the head of aluminium screws size M4. PACKAGING The thermistors are packed in cardboard boxes; the smallest packaging quantity is 100 units. MARKING The last 4 digits of the catalog number are printed on the stud in accordance with the information in Electrical Data and Ordering Information Table. MOUNTING By means of a washer and M4 nut supplied with the device. Applied torque shall not exceed 1.2 Nm. Leads to be soldered or crimped. DIMENSIONS in millimeters Ø ± 3 8 ± min. 6.7 max. Component outline M4 8 max. ELECTRICAL DATA AND ORDERING INFORMATION R 25 (KΩ) B 25/85 - VALUE TC 12NC ORDERING CODE SAP MATERIAL NO. NTCSCWE K ± 0.75 % J K ± 0.75 % J K ± 0.75 % J K ± 1.5 % J K ± 1.5 % J K ± 1.5 % J K ± 1.5 % J K ± 2.5 % J K ± 2 % J Note R 25 - values, temperature coefficients and catalog numbers. The thermistors have a 12-digit catalog number starting with The subsequent 4 digits indicate the resistance value and tolerance. For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 10-Feb-06

128 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added labor required prior to assembly in the intended application Standard and custom assemblies are available in a variety of configurations. The choice of assembly style is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant. The two factors which do vary considerably with assembly design are time constant and dissipation constant. The time constant will typically be of greater duration in encapsulated thermistors. This is, of course, due to additional mass surrounding the thermistor element; therefore, extending the thermal transfer time. Dissipation constant will also be greater in assemblies. The additional housing mass serves well as a heat sink. Greater power is therefore required to induce self-heating. Both time constant and dissipation constant will vary with the selected thermistor and housing. Heat transfer properties of the housing, thermistor location, mass and wire type determine these constants. It is recommended to evaluate or consult the factory in applications where TC and DC are critical. ASSEMBLY STYLES IMMERSION PROBES 1. Thread Mounted 2. Penetration Probe 3. Tubular Stainless Steel 4. Tubular Pyrex 5. Flexible Immersion GENERAL PURPOSE SENSORS 6. Delrin Housing 7. Stainless Steel Rod 8. Gold Anodized Flanged Sensor 9. ABS Housing 10. Polyester Housing 11. Epoxy Tip Probe 12. Pipe Sensor SURFACE SENSORS 13. Ring Tongue Lugs 14. Heat Sink Sensors 15. Rectangular Block Sensors Refer to How to Select an NTC Thermistor for general design aids in choice of thermistor value, tolerance and R-T curve. ORDERING INFORMATION 1. Choose Style: R07 2. Select Wire Type: PVC Insulated - example Select Wire Length: L06 4. Select Thermistor - See thermistor selector sheet 1) Curve 01 2) Resistance value numeric code ) Resistance tolerance Contact factory for part numbers. Document Number: For technical questions, contact: thermistor1@vishay.com Revision: 23-Oct

129 NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies IMMERSION TYPE ASSEMBLY HOUSING [6.35] [5.08] [9.65] X [11.12] [9.65] X [11.12] T1 = 1 T2 = 1.5 T3 = 3 T4 = 6 L L = 1.15, 3.6 INCHES 1/8 [3.18] /8 PROBE [4.06] THREAD 1/8 NPT MATERIAL: #303 STAINLESS STEEL [4.78] [14.3] 1/4-20-NC TAP X [12.06] [3.96] 1/8-27-NPT MATERIAL: #304 STAINLESS STEEL [16.51] X [4.06] 0.30 [7.62] [11.12] 1/8 PROBE /16 PROBE [4.06] THREAD 1/8-27-NPT MATERIAL: #303 & #304 STAINLESS STEEL [24.38] [7.92] X [7.49] [23.82] MATERIAL: BRASS TUBES T1, T2, T3, T4, T13, T14 FIT TO HEX BUSHING X1 TUBES T5, T6, T7, T8, T9, T10 FIT TO HEX BUSHING X2 TUBES T1, T2, T3, T4, T13, T14 FIT TO COUPLING X5 MATERIAL #304 STAINLESS STEEL T5 = 1.5 T6 = 2.5 T7 = 3 T8 = 4 T9 = 6 T10 = 8 L L = 1, 1.5, 2.5, 3, 4, 6, 8 INCHES MATERIAL #304 STAINLESS STEEL T11 = 2.5 T12 = 6 L L = 2.5, 6 INCHES MATERIAL #304 STAINLESS STEEL T13 = 1.25 T14 = 6.25 L L = 1.25, 6.25 INCHES [2.67] [4.27] [5.84] 3/16 [4.78] 1/4 [6.35] 1/8 [3.18] MATERIAL: #303 STAINLESS STEEL ALL TUBES MAY BE USED INDEPENDENT OF ANY BUSHING OR COUPLING MATERIAL #304 STAINLESS STEEL [2.67] PROBE + HEX HOUSING LEAD TYPE SHRINK WRAP LEAD TYPE LEAD LENGTH PROBE THERMISTOR SHRINK WRAP SEE THERMISTOR SELECTION SHEET X1 T1 300 L C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE TUBE SELECTION HEX BUSHING/PROBE SELECTION HOOK-UP WIRE STANDARD WIRE FOR HEX/TUBE HOUSINGS TYPE X1/X5 X2 X3 X4 T1 - T4 T5 - T10 T11 - T12 T13 - T14 Cable Teflon Insulated Wire PVC Insulated Wire Twisted Pair Wire Zip (Flat) Wire Ni Wire, Teflon Insulated STANDARD WIRE LENGTHS: 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 23-Oct-01

130 CUP TYPE ASSEMBLY HOUSING NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale C01 MATERIAL: ALUMINUM C [16.03] [38.1] Ø 0.28 [7.11] [6.3] [4.44] MATERIAL: NICKEL PLATED BRASS C [38.1] [5.08] Ø 0.28 [7.11] C [22.2] Ø [3.96] [3.18] MATERIAL: #303 STAINLESS STEEL [4.29] C [11.51] [6.3] MATERIAL: #2024-T4 ALUMINUM C [12.7] [3.56] [4.32] [22.2] C [4.11] MATERIAL: #2011 ALUMINUM 0.63 [16.0] [6.96] [0.89] MATERIAL: C [5.46] [7.57] GOLD ANODIZED ALUMINUM [4.78] C [12.09] [5.84] 0.22 [5.59] MATERIAL: CELANEX (BLACK POLYESTER) [3.56] MATERIAL: DELRIN II#500 WHITE & BLACK [1.02] MATERIAL: MOLDED ABS [4.32] CUP SELECTION LEAD LENGTH THERMISTOR LEAD TYPE SEE THERMISTOR SELECTION SHEET C L C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION HOOK-UP WIRE STANDARD WIRE FOR CUP HOUSINGS TYPE C01 C02 C03 C04 C05 C06 C07 C08 Cable 503 N/A Teflon Insulated Wire PVC Insulated Wire Zip (Flat) Wire Twisted Pair Wire Ni Wire, Teflon Insulated STANDARD WIRE LENGTHS: 3, 6, 9, 12, 24, 36 Inches Document Number: For technical questions, contact: Revision: 23-Oct

131 NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies TEX BUSHING/PROBE TYPE ASSEMBLY HOUSING TAP METRIC M [1.52] [4.57] H [4.06] [12.7] [4.06] [4.57] MATERIAL ALUMINUM Ø [2.8] [6.35] [3.3] Ø [3.18] [19.05] [9.52] H [2.39] [9.52] [4.76] MATERIAL ALUMINUM [4.78] Ø Ø [3.81] [7.62] [3.18] [4.78] [22.61] H [13.72] [4.32] [8.13] [3.1] THREAD 10-32UNC-2A [1.27 MATERIAL ANODIZED ALUMINUM [7.95] [4.78] [14.5] [8.00] [6.5] THREAD M4 X 0.7 6g [1.02] H04 H05 & H06 H07 H [3.56] [7.75] [6.0] [12.7] [6.35] [6.35] [3.56] THREAD 6-32UNC-2A [1.27] 1/4 [6.35] [5.08] MATERIAL BRASS CA-132 MATERIAL ALUMINUM (H5) & BRASS (H6) MATERIAL 2024-T4 ALUMINUM MATERIAL #303 STAINLESS STEEL [6.35] [14.48] [33.53] [3.1] THREAD 10-32UNF-2A [0.76] 5/16 [7.95] [6.35] [19.05] [9.52] [9.52] [4.75] [2.84] THREAD 4-40 UNC-2A [3.25] [1.9] HEAT SINK SELECTION LEAD LENGTH THERMISTOR LEAD TYPE SEE THERMISTOR SELECTION SHEET H L C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION HOOK-UP WIRE STANDARD WIRE FOR HEAT SINK HOUSINGS TYPE H01 H02 H03 H04 H05 H06 H07 H08 Cable Teflon Insulated Wire PVC Insulated Wire Twisted Pair Wire Zip (Flat) Wire Ni Wire, Teflon Insulated STANDARD WIRE LENGTHS: 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 23-Oct-01

132 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale RING TONGUE TYPE ASSEMBLY HOUSING R01 R02 R03 R [19.56] [15.65] [6.35] [3.02] THICK [0.81] [5.38] INSULATED BARREL [19.56] [16.13] [6.35] [3.71] THICK [0.81] [5.92] INSULATED BARREL [22.61] [17.90] [4.39] THICK [0.81] [7.36] INSULATED BARREL [13.82] 1.23 [31.24] [24.33] [6.76] THICK [0.81] [13.8] INSULATED BARREL [6.35] [6.35] [5.84] [6.35] R05 R06 R07 R [13.97] [10.92] [2.97] THICK [1.02] [4.06] BARE METAL BARREL [20.83] [16.76] [3.68] THICK [1.02] [6.86] BARE METAL BARREL [20.83] [16.76] [4.39] THICK [1.02] [6.86] BARE METAL BARREL [24.00] [18.85] [5.08] THICK [1.3] [9.12] BARE METAL BARREL [4.01] [5.6] [5.6] [7.24] RING TOUNGUE LUG SELECTION LEAD LENGTH THERMISTOR LEAD TYPE SEE THERMISTOR SELECTION SHEET R L C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION HOOK-UP WIRE STANDARD WIRE FOR HEAT SINK STYLES TYPE R01 R02 R03 R04 R05 R06 R07 R08 Cable N/A Teflon Insulated Wire PVC Insulated Wire Twisted Pair Wire N/A Zip (Flat) Wire Ni Wire, Teflon Insulated STANDARD WIRE LENGTHS: 3, 6, 9, 12, 24, 36 Inches Document Number: For technical questions, contact: Revision: 23-Oct

133 NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies PIPE STYLE ASSEMBLY HOUSING [13.97] CONTACT LENGTH 2.15 MAX [54.6] [23.5] P01 P02 P03 P [5.08] [3.96] [1.59] [7.37] [9.78] [29.97] [14.22] P05 Ø [4.95] Ø [5.97] Ø [3.56] Ø [7.92] [1.65] MATERIAL: #305 STAINLESS STEEL P06 Ø [8.43] Ø [7.29] Ø [7.29] [4.01] [1.02] [7.62] R [6.35] R [4.27] MATERIAL: CELANEX (BLACK POLYESTER) MATERIAL: #305 STAINLESS STEEL MATERIAL: #304 STAINLESS STEEL CUP SELECTION LEAD LENGTH THERMISTOR TIE DOWN LEAD TYPE SEE THERMISTOR SELECTION SHEET P L C3 RESISTANCE TOLERANCE RESISTANCE VALUE NUMERIC CODE THERMISTOR MATERIAL CURVE USED IN ASSEMBLY LENGTH OF WIRE TYPE OF INTERCONNECTION WIRE CUP SELECTION HOOK-UP WIRE STANDARD WIRE FOR PIPE HOUSINGS TYPE P01 P02 P03 P04 P05 P06 Cable N/A 503 N/A N/A Teflon Insulated Wire PVC Insulated Wire Zip (Flat) Wire Twisted Pair Wire Ni Wire, Teflon Insulated STANDARD WIRE LENGTHS: 3, 6, 9, 12, 24, 36 Inches For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 23-Oct-01

134 NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale ASSEMBLY CONNECTORS WIRE I1 I2 I3 RECEPTABLE FOR 3/16 X TAB I5 2 CAP HOUSINGS 2 SOCKETS SOCKET (18-24 AWG) (AMP P/N: ) WIRE I7 1 PLUGHOUSINGS 2 TERMINALS MALE TERMINAL (18-24 AWG) (AMP P/N: ) BRASS W/GOLD PLATE WIRE CAP HOUSING (AMP P/N: ) I4 22 AWG. 2-CIRCUIT HOUSING AND DUST COVER COVER (AMP P/N: ) TIN COPPER ALLOY CONTACTS, GOLD PLATED I6 1 RECEPTACLE 2 TERMINALS FEMALE TERMINAL (24-30 AWG) (MOLEX P/N: ) BRASS W/TIN PLATE FEMALE TERMINAL (18-24 AWG) (MOLEX P/N: ) BRASS W/TIN PLATE I8 1 MINI-FIT HOUSING 2 TERMINALS HOUSING (AMP P/N: ) FREE HANGING RECEPTACLE (MOLEX P/N: ) 2-CIRCUIT PLUG HOUSING (AMP P/N: ) 2-GKT MINI-FIT HOUSING (MOLEX P/N: ) ASSEMBLY STRAIN RELIEF AND MARKING S1: SHRINK WRAP STRAIN RELIEF, HOUSING/LEAD S2: SHRINK WRAP STRAIN RELIEF, LEADS S5 S3: SHRINK WRAP WITH MARKING S4: AVERY LABEL MARKING S2 S1 S5: SPRING - STRAIN RELIEF CUST. P/N S4 S3 CUSTOMER P/N Document Number: For technical questions, contact: thermistor1@vishay.com Revision: 23-Oct

135 NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies HOOK UP WIRES AVAILABLE WIRE P/N # COND S AWG CONDUCTOR MATERIAL INSULATOR NOM. DIA COMMENTS Bare, Copper Wire, Tin Plated Cu/Tin Plate G Series Thermistor Std Cu/Tin Plate Cu/Tin Plate B Series Thermistor Std Cu/Tin Plate C Series Thermistor Std Cu/Tin Plate M Series Thermistor Std Cu/Tin Plate F Series Thermistor Std Copper Conductor, Silver Plated with Teflon Insulation /30 Cu/Silver Plate Teflon Black /34 Cu/Silver Plate Teflon Black /32 Cu/Silver Plate Teflon Black, White , /36 Cu/Silver Plate Teflon White /32 Cu/Silver Plate Teflon Black /38 Cu/Silver Plate Teflon Red /36 Cu/Silver Plate Teflon Orange, Red, Black , -03, /36 Cu/Silver Plate Teflon Black, White, Green , -02, /38 Cu/Silver Plate Teflon Black Cu/Silver Plate Teflon Black, White , Cu/Silver Plate Teflon Black Cu/Silver Plate Teflon Black Cu/Silver Plate Teflon Black Copper Conductor, Tin Plated with PVC Insulation /38 Cu/Tin Plate PVC Black, White, MIL-W-16878/1, Type B /36 Cu/Tin Plate PVC Black, White,Green, MIL-W-16878/1, Type B , -05, /32 Cu/Tin Plate PVC Black, White, MIL-W-16878/1, Type B , /34 Cu/Tin Plate PVC Black, MIL-W-16878/1, Type B /38 Cu/Tin Plate PVC Black, MIL-W-16878/1, Type B /30 Cu/Tin Plate PVC Black, UL /32 Cu/Tin Plate PVC Yellow, UL /30 Cu/Tin Plate PVC White, UL /34 Cu/Tin Plate PVC Light Blue, UL /30 Cu/Tin Plate PVC Black, UL /34 Cu/Tin Plate PVC Black, UL /32 Cu/Tin Plate PVC Black, UL Cu/Tin Plate PVC Black, UL Cu/Tin Plate PVC Black Miscellaneous Insulated Wires Nickel Teflon Yellow, Black, T Series Thermistor , Cu/Silver Plate Kynar Black, UL /36 Cu/Silver Plate Kapton Black For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 23-Oct-01

136 HOOK UP WIRES AVAILABLE (continued) NTC Thermistor Assemblies NTC Thermistor Assemblies Vishay Dale WIRE P/N # COND S AWG CONDUCTOR MATERIAL INSULATOR NOM. O.D. COMMENTS Cables - Wires w/ Jackets Exterior /30 Cu/Tin Plate PVC 0.22/0.075 Gray Jacket w/ Black/White/Braid Shield /28 Cu/Tin Plate PVC 0.175/0.059 Gray Jacket w/ Red/Black Wires /34 Cu/Silver Plate Teflon 0.142/0.050 White Jacket w/ Black/White/Braid Shield /30 Cu/Tin Plate PVC 0.160/0.048 Gray Jacket w/ Red/Black Wires /30 Cu/Tin Plate PVC 0.160/0.048 Gray Jacket w/ Red/Black/White Wires /30 Cu/Tin Plate PVC 0.130/0.048 Gray Jacket w/ Red/Black/Drain Wires /30 Cu/Tin Plate PVC 0.170/0.057 Gray Jacket w/ Red/Black Wires /30 Cu/Tin Plate PVC 0.160/0.048 Gold Jacket w/ Black/White Wires /36 Cu/Tin Plate PVC 0.100/0.033 Gray Jacket w/ Black/White/Paper Wrap Cu/Tin Plate Teflon Red, White, Black in Stainless Steel Braid Flat Wire & Zip Cords /32 Cu/Tin & Cu PVC X Clear w/ 1 Tin Plated Cu and 1 Bare Cu /36 Cu/Tin & Cu PVC X Black w/ 1 Tin Plated Cu and 1 Bare Cu /34 Cu/Tin & Cu PVC X Black w/ 1 Tin Plated Cu and 1 Bare Cu /36 Cu/Tin Plate PVC X Gray, UL Twisted Pair Wires /32 Cu/Silver Plate Teflon White, UL Twists/Inch /34 Cu/Tin Plate Tefzel Blue /30 Cu/Tin Plate PVC Black/White, UL /32 Cu/Tin Plate PVC Black/White, UL /32 Cu/Tin Plate PVC White/White, UL Document Number: For technical questions, contact: thermistor1@vishay.com Revision: 23-Oct

137 NTC Thermistor Assemblies Vishay Dale NTC Thermistor Assemblies THERMISTOR SELECTIONS FOR SPECIAL ASSEMBLIES R 25 Code R 25 (Ohms) CURVE NUMBER K K K K K K K K K 27 5K K K K 31 10K 32 12K 33 15K 34 18K 35 22K 36 27K 37 33K 38 39K 39 47K 40 50K 41 56K 42 68K 43 82K K K K K K K K K K K 53 1 Meg Curve 1, 10K Thermistor, ± 5 % at 25 C CURVE NUMBER VALUE CODE TOLERANCE at + 25 C THERMISTOOLERANCES POINT MATCHED AT 25 C 01 ± 1 % 02 ± 2 % 03 ± 3 % 05 ± 5 % 10 ± 10 % CURVE TRACKING B3 ± 0.5 % 0 C to + 70 C A3 ± 1 % 0 C to + 70 C B4 ± 0.5 % 0 C to C A4 ± 1 % 0 C to C B5 ± 0.5 % + 25 C to + 90 C A5 ± 1 % + 25 C to + 90 C B8 ± 0.5 % 0 C to + 50 C C8 ± 1 % 0 C to + 50 C For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 23-Oct-01

138 NTC Thermistors, Steel Capped Sensors FEATURES High mechanical strength AMP connectors for easy connection Excellent accuracy over a wide temperature range Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC QUICK REFERENCE DATA PARAMETER VALUE Resistance value at: 0 C Ω ± 7 % 25 C Ω ± 4 % 85 C 1475 Ω ± 3 % 100 C 963 Ω ± 4.2 % B 25/85 - value 3730 K Temperature coefficient %/K Maximum dissipation 250 mw Dissipation factor: in still air (for information only); note mw/k in still water (for information only); note 1 18 mw/k Thermal time constant (t) in still air; note s Response time; note 2 13 to 16 s Temperature gradient; note K/K Operating temperature range: at zero power; continuously - 25 to C at zero power; peak 130 C at maximum power 0 to + 55 C Minimum dielectric withstanding voltage (RMS) between terminals and capsule during: 1 minute 1500 V 10 seconds 1650 V Minimum insulation resistance between 100 MΩ terminals and capsule at 100 V (DC) Mass 8g Notes 1. Measured with AMP connectors in still air with solid copper wires of 1 mm diameter. 2. The response time is the time necessary to change 63.2 % of the total difference between the initial and the final body temperature, when subjected to a step function change in ambient temperature. Step change: a) initial temperature: air at 25 C b) final temperature: water at 100 C 3. The temperature gradient is the difference per degree Celsius between the true temperature of the liquid (water) and the temperature measured by the sensor. APPLICATIONS Sensors for water temperature control in, for example: washing machines dish washers heat pumps electric boilers. These thermistors have a negative temperature coefficient. The device consists of a ceramic material which is mounted in a capsule of stainless steel and provided with two 6.3 mm tinned bronze spade connectors. The device is non-flammable and the housing is stainless steel in accordance with DIN ( 5 CrNi 18 9). MOUNTING Connect to two FASTONS 6.3 x 0.8 or equivalent. PACKAGING The thermistors are packed in cardboard boxes; the smallest packaging quantity is 50 units. DIMENSIONS in millimeters Component outline 4 ± 1 4 ± ± ± max (1) (1) O 12.4 O ± 0.1 Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 12-Apr

139 NTC Thermistors, Steel Capped Sensors METHOD OF APPLICATION DERATING sensor plate water P 100 Tmax T peak T Power derating curve For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 12-Apr-05

140 Model Numbers Global Part Numbering Information NTC / NTCC100E W Naked Chips

141 Global Part Numbering Information NTC Naked Chips GENERAL ORDER INFORMATION PART NUMBER: NTC C 100 E4 103 J B N T C C E J B PRODUCT FAMILY NTC EXECUTION TYPE RoHS COMPLIANCE C = naked 100 = TERMINATION TYPE chips standard size E4 = Sn R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values TOLERANCE ON R25 F = 1 % G = 2 % H = 3 % J = 5 % K = 10 % PACKAGING B = bulk PRODUCT DESCRIPTION: RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 640 = sawn chip NTC TYPE 0 = naked without leads TOLERANCE ON R25 5 = 1 % 4 = 2 % 6 = 3 % 3 = 5 % 2 = 10 % R25 VALUE 103 = 10 x 10 3 Ω 102 = 10 x 10 2 Ω 101 = 10 x 10 1 Ω 109 = 10 x 10-1 Ω 108 = 10 x 10-2 Ω see spec. for values For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 22-Sep-06

142 NTC Thermistors, Naked Chips /NTCC100E4... QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 C (R 25 ) 2.2 to 470 kω Tolerance on R 25 - value ± 1 %; ± 2 %; ± 3 %; ± 5 % B 25/85 - value 3740 to 4570K Tolerance on B 25/85 - value ± 2.5 % to ± 0.75 % Climatic category 40/125/56 Operating temperature range: at zero dissipation (continuously) - 40 to C for short periods 150 C at maximum dissipation 0 to + 55 C Mass see Electrical Data and Ordering Information table FEATURES High stability (tolerance on B-value between ± 2.5 % and ± 0.75 %) over a long life Excellent price/performance ratio For mechanical fixing in a housing or soldering directly to non-standard leads Old part number was Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS Temperature sensing and control DESCRIPTION These thermistors have a negative temperature coefficient. The device consists of a silver metallized square chip. PACKAGING The naked chips are placed in sealed polythene bags and packed in cardboard boxes. The smallest packaging quantity is 5000 units. MOUNTING By reflow or wave soldering in any position or mechanical fixing. The use of ultrasonic soldering is not recommended. ELECTRICAL DATA AND ORDERING INFORMATION R 25 (kω) D (mm) Tmax (mm) B 25/85 VALUE (K) TOL. ON B 25/85 12NC ORDERING CODE ) SAP MATERIAL NO. NBCC100E3... 2) ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 0.75 * *B ± ± 2.0 * *B ± ± 2.0 * *B ± ± 2.0 * *B ± ± 1.5 * *B ± ± 1.5 * *B ± ± 1.5 * *B ± ± 1.5 * *B ± ± 2.5 * *B ± ± 2.5 * *B ± ± 1.5 * *B ± ± 1.5 * *B Note 1. repace * in 12NC by 3 for 5 %, 6 for 3 %, 4 for 2 % and 5 for 1 % tolerance on R 25 C 2. repace * in SAP part no by J for 5 %, H for 3 %, G for 2 % and F for 1 % tolerance on R 25 C Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep

143 /NTCC100E4... NTC Thermistors, Naked Chips DIMENSIONS in millimeters D T max D Component outline MLC901 For dimensions see Electrical Data and Ordering Information Table RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) for /NTCC100E4 (see note 3) 0.222/222.T 0.272/272.T 0.332/332.T 0.472/472.T For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

144 NTC Thermistors, Naked Chips /NTCC100E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) for /NTCC100E4 (see note 3) 0.222/222.T 0.272/272.T 0.332/332.T 0.472/472.T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) for /NTCC100E4 (see note 3) 0.502/502.T 0.602/602.T 0.682/682.T 0.802/802.T 0.103/103.T Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep

145 /NTCC100E4... NTC Thermistors, Naked Chips RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.123/123.T 0.153/153.T 0.223/223.T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.333/333.T 0.473/473.T For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

146 NTC Thermistors, Naked Chips /NTCC100E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.333/333.T 0.473/473.T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.683/683.T 0.104/104.T Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep

147 /NTCC100E4... NTC Thermistors, Naked Chips RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.683/683.T 0.104/104.T RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE R (kω) FOR /NTCC100E4 (see note 3) 0.154/154.T 0.224/224.T For technical questions, contact: nlr.europe@vishay.com Document Number: Revision: 13-Sep-06

148 NTC Thermistors, Naked Chips /NTCC100E4... RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES /R 25 ΔR DUE TO B-TOLERANCE Note: 3. Replace dot according to the following rule and depending on requested tolerance on R 25 C a) for 12NC, 3 for 5 %, 6 for 3 %, 4 for 2 % and 5 for 1 % tolerance on R 25 C b) for SAP ordering code J for 5 %, H for 3 %, G for 2 % and F for 1 % tolerance on R 25 C R (kω) FOR /NTCC100E4 (see note 3) 0.334/334.T 0.474/474.T Document Number: For technical questions, contact: nlr.europe@vishay.com Revision: 13-Sep

149 W Vishay Dale NTC Thermistors, Surface Mount Chip FEATURES Top and bottom surface terminations High-density monolithic ceramic construction Allows design flexibility for use with hyprid circuitry Model W is a thermistor die with silver conductors fired on the top and bottom surfaces. The bottom surface can be reflow soldered or conductive epoxied directly to a substrate bonding pad and the top surface wire bonded to comlete the circuit connection. STANDARD ELECTRICAL SPECIFICATIONS AND DIMENSIONS in inches [millimeters] T W L R25 PART NUMBER CURVE NUMBER L W T (nominal) 10.0M 12W ± [10.1 ± 0.10] ± [10.1 ± 0.10] [0.51] W ± [10.4 ± 0.10] ± [10.4 ± 0.10] [0.41] W ± [10.9 ± 0.15] ± [10.9 ± 0.15] [0.41] W ± [10.0 ± 0.10] ± [10.0 ± 0.10] [0.84] W ± [30.0 ± 0.20] ± [30.0 ± 0.20] [0.41] W ± [10.2 ± 0.10] ± [10.2 ± 0.10] [0.74] W ± [10.4 ± 0.13] ± [10.4 ± 0.13] [0.74] W ± [10.2 ± 0.10] ± [10.2 ± 0.10] [0.61] W ± [10.4 ± 0.10] ± [10.4 ± 0.10] [0.46] W ± [10.3 ± 0.10] ± [10.3 ± 0.10] [0.36] W ± [10.8 ± 0.13] ± [10.4 ± 0.13] [0.38] W ± [10.8 ± 0.13] ± [10.8 ± 0.13] [0.38] W ± [0.74 ± 0.08] ± [0.74 ± 0.08] [0.81] W ± [0.89 ± 0.10] ± [0.89 ± 0.10] [0.81] W ± [10.0 ± 0.10] ± [10.0 ± 0.10] [0.81] W ± [10.3 ± 0.13] ± [10.3 ± 0.13] [0.81] W ± [10.7 ± 0.13] ± [10.4 ± 0.10] [0.38] W ± [20.6 ± 0.15] ± [10.4 ± 0.10] [0.38] W ± [10.2 ± 0.10] ± [10.2 ± 0.10] [0.94] W ± [10.4 ± 0.10] ± [10.4 ± 0.10] [0.56] W ± [20.7 ± 0.15] ± [20.7 ± 0.15] [0.38] 500 2W ± [10.5 ± 0.13] ± [10.5 ± 0.13] [0.38] 500 1W ± [30.8 ± 0.15] ± [30.8 ± 0.15] [0.38] 300 2W ± [20.0 ± 0.15] ± [20.0 ± 0.15] [0.38] 50 2W ± [40.8 ± 0.31] ± [40.8 ± 0.31] [0.38] GLOBAL PART NUMBER INFORMATION New Global Part Numbering: 08W8002KT (preferred part number format) 0 8 W K T CURVE GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING W 1002 = 10K J = ± 5 % K = ± 10 % E = Lead (Pb)-free, Tray T = Tin/Lead, Tray Historical Part Number example: TOMC Z (will continue to be accepted) 08 W 8002 K T HISTORICAL CURVE GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING For technical questions, contact: thermistor1@vishay.com Document Number: Revision: 21-Sep-04

150 Notes Vishay 145

151 Notes Vishay 146

152 Online Information For product information and a current list of sales offices, representatives and distributors, visit our website: Worldwide Sales Contacts The Americas United States Vishay Americas One Greenwich Place Shelton, CT United States Ph: Fax: Asia Singapore Vishay intertechnology Asia Pte Ltd. 25 Tampines Street 92 Keppel Building #02-00 Singapore Ph: Fax: P.R.C. Vishay Trading (Shanghai) Co., Ltd. (SHANGHAI REPRESENTATIVE OFFICE) ROOM D, 15F, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI P.R.C. PH: FAX: Japan vishay japan CO., LTD. Shibuya 3-chome Square Building 3F Shibuya Shibuya-Ku Tokyo Japan Ph: fax: EUROPE Germany Vishay EUROPE SALES GmbH Geheimrat-Rosenthal-Str Selb Germany Ph: Fax: France Vishay S.A. 199, BLVD DE LA MADELEINE NICE, CEDEX 1 France Ph: Fax: Netherlands Vishay BCCOMPONENTS B.V. HURKESTRAAT 31 P.O. BOX AH EINDHOVEN NETHERLANDS Ph: Fax: One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components

153 N T C t h e r m i s t o r s World Headquarters Vishay Intertechnology, Inc. 63 Lancaster Avenue Malvern, PA United States One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components D a t a B o o k Copyright 2006 by Vishay Intertechnology, Inc. Registered Trademarks of Vishay Intertechnology, Inc. All rights reserved. Printed in the United States. Specifications subject to change without notice. w w w. v i s h a y. c o m VSE-DB