ELIN CARC&WATER NSN MIL SPEC ITEM NAME MIL-DTL-64159
|
|
- Sybil Harper
- 5 years ago
- Views:
Transcription
1 CARC&WATER ELIN NSN MIL SPEC ITEM NAME MIL-DTL CARC GREEN: See specificaiton at MIL-DTL CARC BROWN: See specificaiton at MIL-DTL MIL-DTL CARC BLACK: See specificaiton at CARC SAND: See specification at MIL-DTL or ASTM D 1193 Salient Characteristics PHYSICAL FORM PART NAME ASSIGNED BY CONTROLLING AGENCY PRIMER COATING: See specification at WATER Distilled LIQUID DISTILLED-DEIONIZED WATER MAX SOLUBLE SILICIA 10.0 MICROGRAMS PER PROPRIETARY CHARACTERISTICS PACS Wash Primer & Alcohol III TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg or M WASH PRIMER Salient Characteristics MAXIMUM EFFECTIVE TIME AFTER MIXING 8.0 HOURS MAXIMUM EFFECTIVE TIME AFTER APPLICATION 30.0 DAYS RESIN COMPONENT INGREDIENTS POLYVINAL-BUTYRAL PLASTIC AND ZINC CHROMATE AND TITANIUM DIOXIDE AND COPPER-PHTHAOLYNCANINE BLUE AND BUTYL ALCOHOL AND ISOPROPYL ALCOHOL AND WATER ACID COMPONENT INGREDIENTS PHOSPHORIC ACID AND WATER AND ISOPROPYL ALCOHOL MINUTES NOMINAL or TT-I-735 ALCOHOL Salient Characteristics PHYSICAL FORM LIQUID SPECIAL HANDLING FEATURE FLAMMABLE DISTILLATION TEMP 81.3 DEG CELSIUS MINIMUM INITIAL BOILING POINT AND 83.0 DEG CELSIUS MAXIMUM DRY SPECIFIC GRAVITY VALUE MINIMUM AND MAXIMUM A GRADE (See Performance specification-coating, epoxy, high solids). See MIL- PRF-22750G, Para ENAMEL &THINNER NSN MIL SPEC ITEM NAME or MIL-W-5044 OLIVE Salient Characteristics BRUSH SHADE IDENTIFICATION See FINISH FOR WHICH FORMULATED ROUGH 420 ENVIRONMENTAL ATTRIBUTE CODE VOLATILE ORGANIC COMPOUND - COATINGS - AEROSPACE OPERATIONS COATINGS (See Performance specification-coating, epoxy, high solids)
2 CHEMICAL RESISTANT; 30 MINUTE MAX DRYING TIME TO RECOAT; 6 HOUR MAX DRY THRU TIME; FOR USE ON WALKWAYS ON EXTERIOR AIRCRAFT SURFACES OLIVE DRAB or TT-E TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg GRAY Salient Characteristics CHIP NUMBER S See Federal Color Chip Number Charthttp:// GRAY or TT-E-529 SEMI GRAY SEMI CHIP NUMBER S See Federal Color Chip Number Charthttp:// GRAY or MIL-E-7729 GRAY Salient Characteristics CHIP NUMBER S See Federal Color Chip Number Charthttp:// GRAY or TT-E-529 COVERT GREEN Salient Characteristics SEMI HOURS MAXIMUM
3 CHIP NUMBER S See Federal Color Chip Number Charthttp:// GREEN or TT-E-489 GREEN CHIP NUMBER S See Federal Color Chip Number Charthttp:// GREEN or TT-E-489 YELLOW CHIP NUMBER S See Federal Color Chip Number Charthttp:// YELLOW or TT-E TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg RED CHIP NUMBER S See Federal Color Chip Number Charthttp:// RED or MIL-E-7729 WHITE
4 CHIP NUMBER S See Federal Color Chip Number Charthttp:// WHITE or MIL-E-7729 BLUE CHIP NUMBER S See Federal Color Chip Number Charthttp:// BLUE or MIL-E-7729 YELLOW (CN) CHIP NUMBER S See Federal Color Chip Number Charthttp:// BLACK or TT-E-489 BLACK CHIP NUMBER S See Federal Color Chip Number Charthttp:// BLACK or TT-P-28G ALUMIUM HIGH TEMPERATURE CORROSION PREVENTIVE 1200 DEG FAHRENHEIT TEMP RATING DEG FAHRENHEIT MAXIMUM ALUMINUM PIGMENT SILICONE OR SILICONE RESIN 250
5 FOR USE ON HEATED STEEL SURFACES SUCH AS SUPERHEATED STEAM LINES, PERSONNEL HEATERS, ROCKET LAUNCHERS, AND ON OTHER EQUIPMENT THAT PRECLUDES THE USE OF CONVENTIONAL PAINT ALUMINUM or MIL-P BLACK (ENGINE) STEEL BRUSHING AS PACKAGED OR SPRAYING AFTER THINNING TEMP RATING DEG FAHRENHEIT NOMINAL AND CHROMATE FREE FLAT 1 HOURS MAXIMUM CHIP NUMBER See Federal Color Chip Number Charthttp:// 420 FOR USE ON STEEL SURFACES EXPOSED TO HIGH TEMPERATURES AND EXTERIOR WEATHERING BLACK 1 TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg or MIL-PRF-680 ENAMEL THINNER DISTILLATION TEMP RANGE TO DEG FAHRENHEIT ENVIRONMENTAL ATTRIBUTE CODE PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT REGULAR LOW AROMATICS MINERAL SPIRITS 769 MEDIA FOR WHICH DESIGNED PAINT SPECIFICATION/STANDARD DATA ASTM D235 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 1 TYPE AND C CLASS (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg or MIL-C-450 USAGE DESIGN UNDER COATING FOR COATING SURFACES OF AMMUNITION CAVITIES PRIOR TO FILLING WITH EXPLOSIVES SOLID CONTENT PERCENTAGE 36 MATERIAL ASPHALT L COMPOSITION AND 1 TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg EPOXY&THINNER 25 NSN MIL SPEC ITEM NAME or MIL-C GREEN CONTENT WITHIN EACH UNIT PACKAGE SPRAYING AS IS OR SPRAYING AFTER THINNING CONSISTS OF COMPONENT A (EPOXY RESIN AND SOLVENTS) AND COMPONENT B (POLYAMIDE AND/OR AMINE RESIN AND SOLVENTS) TO EQUAL 1 GALLON AND CHROMATE FREE SEMI EPOXY RESIN AND POLYAMIDE RESIN FINISH FOR WHICH FORMULATED FINE
6 CHIP NUMBER ENVIRONMENTAL ATTRIBUTE CODE See Federal Color Chip Number Charthttp:// LOW VOLATILE ORGANIC COMPOUND - COATINGS - AEROSPACE OPERATIONS COATINGS STANDARD FORMULATION; HIGH SOLIDS; SOLVENT BASE; FOR INTERIOR OF TACTICAL EQUIPMENT NOT REQUIRING WEATHER RESISTANCE GREEN TYPE AND H CLASS AND B GRADE. Ref: MIL-PRF-22750G, parg parg and parg or MIL-C WHITE CONTENT WITHIN EACH UNIT PACKAGE FINISH FOR WHICH FORMULATED SPRAYING AS IS OR SPRAYING AFTER THINNING CONSISTS OF COMPONENT A (EPOXY RESIN AND SOLVENTS) AND COMPONENT B (POLYAMIDE AND/OR AMINE RESIN AND SOLVENTS) TO EQUAL 1 GALLON AND CHROMATE FREE EPOXY RESIN AND POLYAMIDE RESIN FINE CHIP NUMBER See Federal Color Chip Number Charthttp:// STANDARD FORMULATION; HIGH SOLIDS; SOLVENT BASE; FOR INTERIOR OF TACTICAL EQUIPMENT NOT REQUIRING WEATHER RESISTANCE WHITE or MIL-T TYPE AND H CLASS AND B GRADE (See Performance specificationcoating, epoxy, high solids). Ref: MIL-PRF-22750G, parg parg and parg EPOXY THINNER BASIC MATERIAL TYPE SOLVENT SOLUTION 839 FOR AIRCRAFT COATINGS MEDIA FOR WHICH DESIGNED EPOXY 28 No NSN - Korean Product Any Korean produced epoxy are acceptable CLEANPOXY Lining High Green 29 No NSN - Korean Product Any Korean produced epoxy are acceptable CLEANPOXY Lining (Hardener) 30 No NSN - Korean Product Any Korean produced epoxy are acceptable CLEANPOXY Undercoat 31 No NSN - Korean Product Any Korean produced epoxy are acceptable CLEANPOXY Undercoat(Hardener) 32 No NSN - Korean Product Any Korean produced epoxy are acceptable EPOXY THINNER(DR-100) 2 TYPE (See Performance specification-coating, epoxy, high solids). Ref: MIL-PRF-22750G, parg or TT-P-19 FLAT LATEX BASIC FORMULATION TYPE CHIP NUMBER AND CHROMATE FREE FLAT EMULSION 30 MINUTES MAXIMUM See Federal Color Chip Number Charthttp:// IVORY No NSN - Korean Product Any Korean produced rust proof liquids Rust Proof Liquid On metal surface
7 Note: Federal Color Chip Number Chart-
8
9
10
11
12
13
14
PRODUCT GUIDE: UNIVERSAL PRIMERS. Version:
PRODUCT GUIDE: UNIVERSAL PRIMERS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA SHEET PRODUCT: LIGHT GREY PRIMER Product Number: 2208-08 DESCRIPTION: A quick fast dry metal primer that was designed to have
More information(a) Short-term storage of tubeless wheel assemblies may be stored with the wheel o- ring packing installed between the two halves.
Manual AWBCMM0001-7.2/USA Section 300 External Design (2) Wheels Stored Without Tires Installed (a) Short-term storage of tubeless wheel assemblies may be stored with the wheel o- ring packing installed
More informationNAVSEA REVIEWED ASTM F-718. Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White / MS203R Yellow / MS218H Part B
ASTM F-718 ITW Engineered Polymers, American Safety Technologies (AST) MS-200 Acrylic Epoxy Color Topping PRODUCT DESIGNATIONS Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 The Sherwin-Williams Company SeaGuard 5000 HS PRODUCT DESIGNATION Part A: N11-350 base color series Part B: N11V350 hardener MIL-PRF-23236 MIL-PRF-24647 If this product is to be applied as part
More informationOPTIONAL PANEL MOUNTING FLANGES. Case shown with optional feature.
CENTURION CENTURION The watertight Centurion Polaris Series from ZERO Manufacturing, Inc. features deep-drawn heat-treated aluminum case shells with wrinkle-free surfaces, accented by distinctive styling
More informationTUFCOTE 3.3 PR HIGH SOLIDS FAST DRY ALKYD PRIMER (formerly DuPont 681 FD )
TUFCOTE 3.3 PR (formerly DuPont 681 FD ) Tufcote 3.3 PR is an phenolic modified medium oil, lead and chromate free, single-package, VOC conforming primer (3.3 lbs./gal.) based on DuPont alkyd technology.
More informationAward (Y / N) Reason UOM Supplier Qty Price
Garland Independent GISD Sourcing Bid Tab Bid#: 31605 Title: 227-16 PAINT AND SPECIAL TINTS Quote# Vendor / Supplier EPCNT Discount 472189 Yes 35% 472165 CO Yes 0% discount, quantity dis 471144 Yes 30-40
More informationPreservation and Corrosion Prevention Techniques. Omegaline Air-Cooled RF Loads
. Altronic Research Inc. PO BOX 249 YELLVILLE AR 72687-0249 USA Preservation and Corrosion Prevention Techniques.......... for Omegaline Air-Cooled RF Loads Improving product life in hostile environments
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC Interthane 990 MIL-PRF-24667 If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. This NAVSEA-REVIEWED
More informationNAVSEA REVIEWED ASTM F-718. MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating
ASTM F-718 ITW Engineered Polymers, American Safety Technologies MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating PRODUCT DESIGNATIONS Part A: Dark Gray MS434R Part B: MS432H MIL-PRF-24667 If
More informationNAVSEA REVIEWED ASTM F-718. Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02
Randolph Products ASTM F-718 Randogrip Metal Primer PRODUCT DESIGNATIONS Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02 MIL-PRF-24667 If this product is to be applied as part
More informationNAVSEA REVIEWED ASTM F-718. Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive
ASTM F-718 International Paint LLC Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive PRODUCT DESIGNATIONS Part A: ENA380 Bronze or ENA381 Aluminum (Gray) Part B: ENA383
More informationSMART TRUCK BED LINER - TINTABLE
SMART Truck Bed Liner (SMT93) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Black Truck Bed Liner (SMT930) is also available. One Kit of SMART Bed Liner includes:
More informationImron 2.1 HG-C High Gloss Polyurethane Clearcoat
Imron 2.1 HG-C High Gloss Polyurethane Clearcoat GENERAL DESCRIPTION Imron 2.1 HG-C High Gloss Aliphatic Polyurethane Clearcoat is a high-solids, two-package, VOC conforming, 2.1 lbs./gal, very low HAPS
More informationAMERICAN COATINGS. Systems Guide
AMERICAN COATINGS Systems Guide www.americancoatings.com AMERICAN COATINGS MISSION STATEMENT American Coatings is a can do company manufacturing and developing new products to enhance your effectiveness
More informationNAVSEA REVIEWED ASTM F-718. SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue
ASTM F-718 The Sherwin Williams Company SeaVoyage Copper Free Antifoulant PRODUCT DESIGNATIONS SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue MIL-PRF-24647 If this product
More informationPPI NBR: H-B (REV 01) DATE: November 30, 2010
PPI NBR: 63101-015H-B (REV 01) DATE: November 30, 2010 PRESERVATION PROCESS INSTRUCTION (PPI) for UNDERWATER HULL to be used in conjunction with CORE PPI 63101-000 with a Cleanliness Level of SSPC-SP-12
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationPERFORMALOC 9000 Advanced Productivity Coatings from PPG
PERFORMALOC 9000 Advanced Productivity Coatings from PPG Performance Coatings that Loc Offering its users color and gloss retention that surpasses most 2-comp coatings are manufactured from proprietary,
More informationFlight Compartment. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Flight Compartment CHAPTER 56-10: FLIGHT COMPARTMENT GENERAL 56-10: FLIGHT COMPARTMENT 1. General The windshield is manufactured of acrylic and is adhesive bonded to
More informationNAVSEA REVIEWED ASTM F-718. Chesterton ARC 855N, Ceramic Filled Epoxy Coating
ASTM F-718 ARC Composite Technology Chesterton ARC 855N, Ceramic Filled Epoxy Coating MIL-PRF-32171 If this product is to be applied as part of a coating system, all components of the system must be as
More informationSIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamide cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Very good primer for systems with high solids epoxy buildcoats Can also be used as a system primer
More informationSurface Preparation and Application of Ronass Pipe Shield 1319
Surface Preparation and Application of Ronass Pipe Shield 1319 RONASS TECHNICAL SUPPORT TEAM WWW.RONASS.COM SUPPORT@RONASS.COM PROTECTIVE COATINGS MARINE COATINGS DECORATIVE COATINGS Introduction Ronass
More informationDESCRIPTION AND OPERATION
FLIGHT COMPARTMENT 1. DESCRIPTION AND OPERATION The windshield is manufactured of acrylic and is adhesive bonded to the fuselage. Replacement is accomplished by removing the interior trim around the windshield,
More informationApplication Guide. ATL composites Pty Ltd Tel (+61) Fax (+61)
Repairing, Fairing and Priming : Use these Duratec Products to repair, fair and prime marine composites: Duratec Vinyl Ester Fairing Putty (1810-013 Untinted) Duratec Vinyl Ester Fairing Primer (1799-051
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC Intergard 403, Epoxy Anticorrrosive PRODUCT DESIGNATIONS Part A: KBA400 series Part B: KBA403 MIL-PRF-23236 If this product is to be applied as part of a coating system,
More informationCORROSION PROTECTION CORROSION PROTECTION FEATURING RUST MORT RUST SEAL RUST TRAP RUST SHIELD RUST PREVENTER CAVITY WAX UNDERCOATINGS COMPARISON CHART
CP 0317 CORROSION PROTECTION CORROSION PROTECTION FEATURING RUST MORT RUST SEAL RUST TRAP RUST SHIELD RUST PREVENTER CAVITY WAX UNDERCOATINGS COMPARISON CHART RUST MORT WHEN TO USE IT: For the conversion
More informationTank Truck Product Integrity Protection Guidelines 4 th Edition, Revision 1 August 27, Normal Alpha Olefins Polyalphaolefins
Tank Truck Product Integrity Protection Guidelines 4 th Edition, Revision 1 Normal Alpha Olefins Polyalphaolefins These Product Integrity Protection Guidelines (Guidelines) have been developed to assist
More informationAUTOBASE PLUS SOLID, METALLIC AND PEARL COLORS (HP REDUCERS)
Page 1 of 5 DESCRIPTION: Autobase Plus basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be
More informationTurbo Plus P488/P486-line. P486- Turbo Plus colour mixes and ready mixed colours. P Turbo Plus Extra Slow MS hardener
FOR PROFESSIONAL USE ONLY Date of issue : September 2002 Turbo Plus P488/P486-line Products P486- Turbo Plus colour mixes and ready mixed colours P488- Turbo Plus mixing basics P273-083 Turbo Plus Adjuster
More informationPROTECTIVE & MARINE COATINGS
PROTECTIVE & MARINE COATINGS PPG/Warren Safe-T Plus Single Coat Rapid Return to Service Epoxy 08/25/10 Business Case for Single Coat Paints Review U. S. Navy Goals Single Coat and Rapid Cure coatings for
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint LLC Intertuf 6, Two Pack Anticorrosive Epoxy Primer PRODUCT DESIGNATIONS Part A: KH Series Part B: KHA6 MIL-PRF-336 MIL-PRF-67 If this product is to be applied as part of
More informationNAVSEA REVIEWED ASTM F-718. Part A: B62L230 OAP Blue, B62W230 White, B62RW230 Red Oxide, B62AW230 Haze Gray
ASTM F-718 The Sherwin Williams Company Fast Clad ER PRODUCT DESIGNATIONS Part A: B62L230 OAP Blue, B62W230 White, B62RW230 Red Oxide, B62AW230 Haze Gray Part B: B62V230 Clear, B62GV230 Light Green, B62AV230
More informationNEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI
High Transfer Efficiency AQMD Compliant Ultra-Fine Atomization Precision Fan Control Easy-Clean Gun Body Built-In Cheater Valve Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements:
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationTraining and Ongoing Support. VOC-Compliant. Exclusive Canadian Distributor of Tectyl. Truck World Canada s National Truck Show
VOC-Compliant Exclusive Canadian Distributor of Tectyl Training and Ongoing Support Truck World 2012 Canada s National Truck Show WHO WE ARE Since 1984 Corrosion Control Coatings Ltd. has been a national
More informationNAVSEA REVIEWED ASTM F-718. Part A: B62W210, B62AW210, B62BW210, B62GV210, B62AV210, B62V210
ASTM F-718 The Sherwin-Williams Company DuraPlate UHS Epoxy PRODUCT DESIGNATIONS Part A: B62W210, B62AW210, B62BW210, B62GV210, B62AV210, B62V210 MIL-PRF-23236 If this product is to be applied as part
More informationNAVSEA REVIEWED ASTM F-718. Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment)
ASTM F-718 The Sherwin-Williams Company Dura-Plate UHS Epoxy Primer PRODUCT DESIGNATIONS Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment) MIL-PRF-23236 If this product is to be applied
More informationNAVSEA REVIEWED ASTM F-718. Part B: B62V260 (standard hardener), B62V265 (OAP hardener)
ASTM F-718 The Sherwin-Williams Company SherPlate PW PRODUCT DESIGNATIONS Part A: B62W260 (white), B62L260 (blue) Part B: B62V260 (standard hardener), B62V265 (OAP hardener) MIL-PRF-23236 If this product
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationUniversal Primer and Surface Preparation Process
Universal Primer and Surface Preparation Process Surface Preparation & Coatings Panel Sept 1, 2015 Outline Update on Zinc Rich Epoxy Primer Efforts Activities This Quarter Plans for Next Quarter Summary
More informationCOMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT
METRIC A-A-3164A April 18, 2007 SUPERSEDING A-A-3164 August 20, 1998 COMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT 1. SCOPE. This description covers a lusterless (flat)
More informationNATO Code s. Cross Referenced to. UK Joint Service Designation. US Military Specification. British Military Specification
NATO Code s Cross Referenced to UK Joint Service Designation Disclaimer: This list is provided solely for the convenience of the user in order to provide comparison of the relevant U.K. MoD to a product
More information44GN098 Water Reducible High Performance Epoxy Primer
TECHNICAL DATA SHEET Product Description Components is a chrome-free, water reducible, chemically cured, two-component epoxy polyamide primer. Corrosion inhibiting Chemical and solvent resistant Resistant
More informationACCESSORIES CATALOGUE
ACCESSORIES CATALOGUE Spray technology Fluid handling Material extrusion Injection www.wiwa.com 1 WIWA ram presses and single post lifts 1.1 WIWA single and twin post ram presses WIWA holder for ram presses
More informationTUFCOTE 1.9 HG-D HIGH GLOSS WATERBORNE ACRYLIC DTM (formerly DuPont 72P )
TUFCOTE 1.9 HG-D (formerly DuPont 72P ) Tufcote 1.9 HG-D is a high gloss, single-package, VOC conforming product (1.9 lbs./gal.) based on waterborne acrylic technology. The resulting coating delivers good
More informationSIGMAZINC 109. PRODUCT DATA SHEET January 16, 2015 (Revision of January 5, 2015) DESCRIPTION. Two-component, zinc-rich, polyamide-cured epoxy primer
DESCRIPTION Two-component, zinc-rich, polyamide-cured epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer for various paint systems Good corrosion prevention properties Quick-drying, can
More informationNAVSEA REVIEWED ASTM F-718. Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer
ASTM F-718 International Paint LLC Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer PRODUCT DESIGNATIONS Part A: KRA922/KRA924/KRA925/KRA92 Part B: KRA923 MIL-PRF-24667 If this product
More informationPPG NOVAGUARD 650 Chemical Resistance Guide
Validity of this list This resistance list supersedes all earlier issues. The information provided in this resistance list is to the best of our knowledge correct and given in good faith. It is not intended
More informationSIGMAZINC 68 SP / AMERCOAT 68 SP
DESCRIPTION Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer in various paint systems for aggressive environments Excellent
More informationConcorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA RG-380E/44 Series
... the heart of your system. Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-380E/44 Series 24 VOLT 42.0 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY USER
More informationTamiya s P-47M By Dick Smith
Tamiya s P-47M By Dick Smith If you re building a 1/48th scale P-47, razorback or bubble top, you can t do much better than choosing one of Tamiya s kits. The detail is excellent. The fit is excellent.
More informationAerospace and Defense Approvals and Conformance Testing By Product
Aerospace and Defense Approvals and Conformance Testing By Product AXAREL 56 Solvent Cleaner (For Immersion and Emulsion Cleaning) Boeing BAC 5200 Cleaning, Preserving and Re-lubricating Anti-Friction
More informationExtended Storage May Extended Storage (More than 30 Days) Procedure for Restoring. to Service an Engine that Has Been in Extended Storage
4 85-12 1 4 85-12 SUBJECT DATE Extended Storage May 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change Extended Storage (More than 30 Days) Deleted "No. 1 diesel
More informationCP01S Corrosion Protection
Uniform Procedures For Collision Repair CP01S Corrosion Protection 1. Description This procedure describes repair methods and inspection requirements for the application of corrosion protection materials
More informationACCESSORIES CATALOGUE
Headquarters and Production WIWA Wilhelm Wagner GmbH & Co. KG Gewerbestraße 1 3 35633 Lahnau Tel. +49(0)64 41/60 9-0 Fax +49(0)64 41/60 9-50 info@wiwa.de www.wiwa.de www.wiwa.com WIWA Partnership USA WIWA
More informationDirective 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.
DESCRIPTION Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS Primer coat in the PHENGUARD tank coating system Excellent resistance to a wide
More informationMEDIUM DURABILITY MEDIUM DURABILITY
PPI NBR: 63001-012M-B (REV 01) DATE: September 07, 2004 MEDIUM DURABILITY PRESERVATION PROCESS INSTRUCTION (PPI) for VENT PLENUMS, DUCTS AND TRUNKS to be used in conjunction with CORE PPI 63101-000 with
More informationConcorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790
Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 91790 RG-380E/60 Series 24 VOLT 48 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION OF DESIGN PERFORMANCE
More informationSMART TRUCK BED LINER - BLACK
SMART Truck Bed Liner (SMT930) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Tintable Truck Bed Liner (SMT93) is also available. One Kit of SMART Bed Liner
More informationPanel Bonding Adhesive
Panel Bonding Adhesive Technical Data August 2017 Product Description 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. 3M Panel
More information10P20-44 High Solids Epoxy Primer
Product Group High solids epoxy primer Characteristics Product Information - A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent corrosion resistance
More informationUK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils)
DESCRIPTION Two-component high solids aluminum pigmented polyamine cured modified epoxy primer/coating PRINCIPAL CHARACTERISTICS Primer/coating designed for maintenance Low VOC Good flow properties Self
More informationConcorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA RG-131
... the heart of your system. Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-131 24 VOLT Various Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT BATTERY DECLARATION
More information(Autobase Plus Metallic) 1x1 Increase distance and apply a metallic orientation coat if necessary.
Description Autobase Plus basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be used in conjunction
More informationWorksheet 1 - General Information
Worksheet 1 - General Information Address: 113 Hillside Ave Unit 3 Londonderry, NH Primary Business: metal coating - job shop Tech Contact: Rojana LaPlume Phone number and/or email address: 421-0916 PROCESS
More informationAs a high performance anti-graffiti clear-coat or top-coat, as needed over any properly substrate where:
AG800 ANTI-GRAFFITI CLEAR NORTHSTAR Superior Performance Transportation Anti-Graffiti Clear Coat Description: AG800 is a premium, high solids clear coat that offers outstanding chemical resistance, gloss
More informationRubber Assembly Lubricants
Rubber Assembly Lubricants What are they? How to improve your assembly operations, increase quality and reduce injuries. 201 Connec*cut Drive, Burlington, NJ 08016 USA Ph (609) 386-8770 Fax (609) 386-8438
More informationA 120V BR GFI Recpt. Features. Material, Color, and Finish. Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 2095 20A 120V BR GFI Recpt. Pass & Seymour/Legrand Catalog Number 2095 Manufacturer Pass
More informationHigh Heat Just Got Hotter!
High Heat Just Got Hotter! It s always been about the heat at VHT. Now we ve rolled out new packaging and improved your project results with the new Danvern EZ Touch nozzle. So now you ll get even hotter
More information935-Series. NORTHSTAR MS, HG Urethane Topcoat. Description:
212013 935-Series NORTHSTAR MS, HG Urethane Topcoat Description: NorthStar s 935-series is the tried and proven success of Medium Solids technology. 935 offers outstanding gloss retention, chemical resistance,
More informationConcorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA RG-128-1, RG-128-2, RG-128-3
... the heart of your system. Concorde Battery Corporation 2009 San Bernardino Road West Covina, California, USA 27106 RG-128-1, RG-128-2, RG-128-3 24 VOLT 3.8 Ah, VALVE REGULATED, LEAD-ACID, AIRCRAFT
More informationPERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
More informationElectric Airless Sprayers Operating Instructions
Electric Airless Sprayers Operating Instructions 309365 Rev. A 3000 psi (210 bar, 21 MPa) Maximum Working Pressure How To Perform: Component Identification....... 3 Setup........................... 4 Startup..........................
More informationSECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body
SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS Body Specifications 236 Protecting your vehicle from corrosion 237 Washing and waxing 238 Cleaning the interior 239 235 SPECIFICATIONS DIMENSIONS AND WEIGHT
More informationB 344 PermaSleeve markers are supplied in roll form in a flattened format on a carrier designed for use with thermal transfer printers.
Technical Data Sheet BRADY B 344 FLUID RESISTANT PERMASLEEVE MARKER TDS No. B 344 Effective Date: 01/08/2014 Description: GENERAL Print Technology: Thermal Transfer Material Type: Irradiated polyolefin
More informationSpecify The Right Paint Using MPI Standards
Specify The Right Paint Using MPI Standards TM Benjamin Moore & Co. works closely with the Master Painters Institute (MPI) to ensure our comprehensive and versatile portfolio meets the high standards of
More informationGENERAL INFORMATION 1 A IMPORTANT INFORMATION
GENERAL INFORMATION 1 A 23253 IMPORTANT INFORMATION Table of Contents Page How To Use This Manual.................. 1A-1 Page Numbering...................... 1A-1 Introduction..............................
More informationMETAL BLACKENING SYSTEM
Item #15357 METAL BLACKENING SYSTEM INSTRUCTIONS The Eastwood Metal Blackening System replicates the factory Black Oxide coating found on many automotive bolts and fasteners as well as numerous small parts.
More informationSPECIFICATION HIGH IMPACT RESISTANT THERMOPLASTIC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 2095TRWRI 20A 125V Spec TR & WR Gfci Rec Pass & Seymour/Legrand Catalog Number 2095TRWRI Manufacturer Pass & Seymour/Legrand
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More informationCOMPETITIVE INITIATIVE AVIATION FUEL RECLAMATION SYSTEM TECHNICAL SPECIFICATION
1.0 SCOPE COMPETITIVE INITIATIVE AVIATION FUEL RECLAMATION SYSTEM TECHNICAL SPECIFICATION A system brand name or equal to Filterdyne Filtration Systems, Inc. Fuel Reclaim System Model F-111 Special, as
More informationSIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS
DESCRIPTION Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS Excellent anticorrosive properties Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures
More informationFEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE. 1.1 Scope. This specification covers technical grade petroleum ether to be used as a solvent.
METRIC 4 May 2015 SUPERSEDING O-E-751C 10 January 2003 FEDERAL SPECIFICATION ETHER, PETROLEUM; TECHNICAL GRADE The General Services Administration has authorized the use of this federal specification by
More informationMILITARY SPECIFICATION CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM PAGE 1
NOT MEASUREMENT SENSITIVE 26 November 1997 SUPERSEDING AMENDMENT 2 31 July 1996 MILITARY SPECIFICATION CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM This amendment forms a part of,
More informationATD MM PRIMER GUN W/CUP INSTRUCTION MANUAL
ATD-6902 1.8MM PRIMER GUN W/CUP INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or
More informationMATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION
MATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION OCT. 1996 This standard specification is reviewed and
More informationPriming coat system without chemical influences. Adequate resistance against mineral oils and greases. For indoor applications.
Paint System "G" Priming coat system without chemical influences. Adequate resistance against mineral oils and greases. For indoor applications. Priming coat FEIDOLUX-primer (1 component) Primer based
More informationParaplex Resins for Industrial Coatings
Paraplex Resins for ndustrial oatings Paraplex Resins! Unique alkydtype polymeric materials! ommonly known as polyester resins! Soft, flexible resins widely used as plasticizers for more brittle filmforming
More informationLuminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
More informationRust Bullet Automotive FAQ s
Rust Bullet Automotive FAQ s 1. What is the difference between Rust Bullet Standard (Gold Label) and Rust Bullet Automotive (Silver Label)? Both Rust Bullet Standard and Rust Bullet Automotive are industrial
More informationDesoprime CF/CA7502E Chrome-Free Epoxy Primer
TECHNICAL DATA SHEET Product Description is a chrome-free, epoxy primer designed for exterior aircraft application. possesses corrosion resistance similar to chromated primers when applied over DesoGel
More informationPRODUCT AND COLOUR GUIDE
PRODUCT AND COLOUR GUIDE 76_Armstead_product guide_aw.indd 2 22/04/2016 11:4 CONTENTS Emulsions 4 Trim 8 Primers 10 Exterior 12 Floor paints 13 System guide 14 76_Armstead_product guide_aw.indd 3 22/04/2016
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationCOMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680
NOT MEASUREMENT SENSITIVE 27 September 00 COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680 The General Services Administration has authorized the use of this commercial item description
More informationLIST OF COMMON SUPPLIES, TOOLS, AND EQUIPMENT FOR AMMUNITION AND EXPLOSIVES OPERATIONS
LIST OF COMMON SUPPLIES, TOOLS, AND EQUIPMENT FOR AMMUNITION AND EXPLOSIVES OPERATIONS U.S. ARMY DEFENSE AMMUNITION CENTER LOGISTICS REVIEW AND TECHNICAL ASSISTANCE OFFICE MCALESTER, OK 74501-9053 Fifth
More informationÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION THINNER, SYNTHETIC RESIN ENAMELS This specification has been approved by the Commissioner,
More informationLPS 1 GREASELESS LUBRICANT
H2 PACKAGE SIZES Net Contents 11 wt.oz. / 312 g/ 379 ml aerosol 20 fl.oz. (591 ml) trigger spray 144 single wipes per case 1 gal. (3.78 L) 5 gal. (18.93 L) 55 gal. (208 L) 312 g/ 11 wt.oz. /379 ml aerosol
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationImron 3.5 HG-C High Gloss Polyurethane Clear
Imron 3.5 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.5 lbs./gal VOC conforming aliphatic polyurethane enamel clear based on unique Axalta resin technology, producing
More information