EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
|
|
- Penelope Dora Stewart
- 5 years ago
- Views:
Transcription
1 EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
2 1x1 Tab-DOWN RJ Description: /0 Base-TX RJ 1x1 Tab-DOWN with LEDs -pin (J0 series) integrated magnetics connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches. RoHS- Part No. RoHS-6 Part No. TX Electrical 2 C Operating Temperature 0 C to +0 C Turns Ratios RX Features and Benefits: RoHS- peak wave solder temperature rating 23 C RoHS-6 peak wave solder temperature rating 260 C Suitable for CAT & 6 Fast Ethernet Cable or better UTP Electrical Performance Summary: Meets or exceeds IEEE 02.3 standard for 0Base-T 30µH minimum OCL with ma bias current Minimum 0Vrms isolation per IEEE 02.3 requirement Insertion Return Loss Common Mode Loss (db TYP) Crosstalk Rejection Hipot Mech. EMI LEDs 1 (db TYP) 0W ±1W (db TYP) (db TYP) (Vrms) Drawing Fingers (L/R) MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 1 MIN J0006D01B J0006D01BNL 1CT:1 1CT:1 A No G/Y J0006D21 J0006D21NL 1CT:1 1CT:1 E YES N/A J0006D21B J0006D21BNL 1CT:1 1CT:1 B YES G/Y J00D01 J00D01NL 1CT:1 1CT:1 C No N/A J00D01B J00D01BNL 1CT:1 1CT:1 A No G/Y J00D21 J00D21NL 1CT:1 1CT:1 E YES N/A J00D21B J00D21BNL 1CT:1 1CT:1 B YES G/Y J00D21E J00D21ENL 1CT:1 1CT:1 B YES G/G J00D21 J00D21NL 1CT:1 1CT:1 E YES N/A J001D21 J001D21NL 1CT:1.1 1CT:1 E YES N/A J001D21E J001D21ENL 1CT:1.1 1CT:1 B YES G/G J002D21 J002D21NL 1CT:2 1CT:1 E YES N/A J002D21B J002D21BNL 1CT:2 1CT:1 B YES G/Y J0026D01 J0026D01NL 1CT:1 1CT:1 D No N/A J0026D01B J0026D01BNL 1CT:1 1CT:1 A No G/Y J0026D01E J0026D01ENL 1CT:1 1CT:1 A No G/G J0026D01F 2 J0026D01FNL 2 1CT:1 1CT:1 A No G/Y J0026D21 J0026D21NL 1CT:1 1CT:1 E YES N/A J0026D21B J0026D21BNL 1CT:1 1CT:1 B YES G/Y J0026D21E J0026D21ENL 1CT:1 1CT:1 B YES G/G J0026D21F 2 J0026D21FNL 2 1CT:1 1CT:1 B YES G/Y J0026D21G 3 J0026D21GNL 3 1CT:1 1CT:1 B YES YG/G J0033D21 J0033D21NL 1.2CT:1 1CT:1 E YES N/A J003D21B J003D21BNL 1CT:1 1CT:1 F YES G/Y J003D01B J003D01BNL 1CT:2. 1CT:1 A No G/Y Notes: 1. LEDs Left/Right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green. 2. LEDs with internal resistor. 3. Bi- color.. RoHS- - Product does not contain out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders.. RoHS-6 - Product does not contain out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than % lead). Part Number RJ Durability Testing Rating Mating Force Unmating Force Durability Plug to Jack (MAX) (MAX) Retention (MIN) J0 Series lbs./2.26 kgs. lbs./2.26 kgs. 0 Insertions 20 lbs./.02 kgs. RJ Material Specification Part Shield Contact Housing MSL 3 Number Material Finish Material Plating Area Solder Area 2 Material Specification Rating J0-20m inches Nickel over Phosphor Nickel underplating and 0µ inches Sn0/Pb Series Brass -20m inches Brass Bronze selective gold plating 1µ inches over 0µ inches nickel Thermoplastic UL V-0 1 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. RoHS-6 parts are tin matte finish over nickel. 3. MSL = Moisture Sensitivity Level rating from 1 to (highest rating = 1, lowest rating = ) USA 6 0 UK France Singapore 6 62 Shanghai / 2 China Taiwan J03.D (/06)
3 1x1 Tab-DOWN RJ A J0 Series Mechanicals B Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.0 0,2 USA 6 0 UK France Singapore 6 62 Shanghai / 2 China Taiwan J03.D (/06)
4 1x1 Tab-DOWN RJ C J0 Series Mechanicals D Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.0 0,2 USA 6 0 UK France Singapore 6 62 Shanghai / 2 China Taiwan J03.D (/06)
5 1x1 Tab-DOWN RJ E J0 Series Mechanicals F Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.0 0,2 USA 6 0 UK France Singapore 6 62 Shanghai / 2 China Taiwan J03.D (/06)
6 1x1 Tab-DOWN RJ J0006 J00 J0 Series Electrical Schematics J00 CT CT CT CT CT 2 TD- 3 RD+ CT NC CHS GROUND NC CHS GRND J001 J002 CT CT NC 1CT : Ö 2 CT CT 1CT : 2 CHS GROUND J0026 J0033 RD+ RD- CHS GROUND C1 RD+ RD- CHS GROUND 1.2CT : 1 USA 6 0 UK France Singapore 6 62 Shanghai / 2 China Taiwan J03.D (/06)
7 1x1 Tab-DOWN RJ J0 Series Electrical Schematics (continued) J003 J003 TD+ TD- RD+ 2 RD- 1 1CT :1 1CT :1 RD+ RD- 1CT : 2. CHS GROUND C1 CHS GROUND LED Configuration LED = B & E Specification (LEDs without internal resistors) LED = M Specification (LEDs without internal resistors) LED = F Specification (LEDs with internal resistors) LED = G Specification (Bi-color LED option with internal resistors) For More Information: Pulse Worldwide Headquarters 220 World Trade Drive San Diego, CA 2 U.S.A. TEL: 6 0 FAX: Pulse Northern Europe 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 RE United Kingdom TEL: FAX: Standard LED Wavelength Forward* V(MAX) (TYP) Yellow nm 2. V 2.1 V Green 6 nm 2. V 2.2 V * Using an internal resistor within the LED increases the voltage rating of the diode from 2. V to.0 V (assumes bias current = 20 ma). Pulse Southern Europe Zone Industrielle F-320 Orgelet France TEL: FAX: Pulse China Headquarters No. 1 Industrial District Changan, Dongguan China TEL: FAX: Pulse North China Room 3 XinYin Building No. YiShan Road Shanghai China TEL: /2 FAX: Pulse South Asia Kampong Ampat #0-01/02 KA Centre Singapore 3632 TEL: 6 62 FAX: Pulse North Asia No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: FAX: Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, Pulse Engineering, Inc. All rights reserved. J03.D (/06)
RJ45 10/100/1000 Base-TX Tab down 1x4 Jack with Magnetic Module. Storage temperature range: -40ºC to +85ºC. LEDs. EMI Fingers (see Mechanical)
RJ45 0/00/000 Base-TX Tab down x4 Jack with Magnetic Module ARJ4A 59. x 3.60 x.50 mm / 5.40 x 3.00 x 0.54mm FEATURES: Tab down Available with or without LED Suitable CAT 5 & 6 cable and UTP Comply IEEE
More informationRJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
More informationSPECIFICATION FOR APPROVAL
Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xulong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED ISSUED BY CHECKED BY APPROVED
More informationSMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT Series
Height: 4.0mm Max Footprint: 11.5mm x 10.3mm Max Current Rating: up to 43.0A Inductance Range: 0.15uH to 68.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized
More informationCustomer P/N: UDE P/N: GD4-QU Description:
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Down Through Hole 10G Base-T Contact Area : 30μ" Min.Gold LED: without LED 100% RoHS without exemption Spec No. GD416005-00 Update Date 2016/11/28 Revision
More information9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude
More informationRV8-ZZ MECHANICAL DIMENSION. 1.1 Product Dimension Unit:mm. Spec No. : RV ± 0.38 ± 0.20 X.X : X.XX : General Tolerance : - 1 -
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Vertical 10G Base-T Contact Area : 30μ" min. Gold LED:L-Green/Orange;R-Green/Orange Spec No. RV816009-00 Update Date 2016/4/20 Revision B Approved Checked
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationProduct Specification AMP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version
Product Specification 108-60026 MP Mini CT DC Drawer Connector, 1.5 mm Pitch Lead Free Version 1. 1.1 Scope: Contents: This specification covers the requirements for product performance, test methods and
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationSupercapacitor Development Balancing Kit
Overview The KEMET Supercapacitor Development Kit includes a two-stage active balancing circuit to complement the S301 Screw Terminal Supercapacitor Series. Each kit contains enough balancing cards, bus
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationGeneral Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, VDC, High Current. Applications
General Purpose, High Stability and AC Line EMI Suppression MDC Series Dual In-Line, 50 630 VDC, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting.
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationMGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC
Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product
More informationPart Number: CAT6+ UTP CMR PRE-TERM 6 CAT6+ UTP CMR Pre-Term 6
Part Number: CAT6+ UTP CMR PRE-TERM 6 CAT6+ UTP CMR Pre-Term 6 Product Description CAT6+ UTP CMR Pre-Term 6 Technical Specifications Product Overview Environmental Space: Suitable Applications: Riser IBDN
More informationMEV3 Series 3kVDC Isolated 3W Single Output DC/DC Converters
SELECTION GUIDE FEATURES RoHS compliant Typical effi ciency from 83% Power density 1.9W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C UL 94V- package material No heatsink required
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationFeatures MICRO-0.25-I MICRO-0.3-I PRODUCTS PANEL
MICRO-0.25-I MICRO-0.3-I PANEL PRODUCTS General Specifications Outdoor models The new Aurora 250 & 300-watt micro-inverter product offers something new to Power-One customers. The ability to individually
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More information- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC
Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product
More informationGeneral Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size , VDC.
General Purpose, High Stability and AC Line EMI Suppression MMC Series Encapsulated Winding, Size 2220 6560, 50 400 Overview KEMET s MMC Series polyester (PET) film capacitor for surface mounting is encapsulated
More informationSilvertel. Ag Features. 2 Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low cost
Silvertel V2.5 Feb 2014 Datasheet Pb 1 Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low cost Input voltage range 36V to 57V Minimal (low cost) external components required
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationSPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS - 87151-XXX9 REVISION: D PRODUCT NAME:
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationAmphenol SCE2/Terrapin Series
APPLICATIONS TECHNICAL SPECIFICATIONS Amphenol SCE2/Terrapin Series Radios Headsets MATERIALS AND FINISHES Shell Material Shell Plating Contact Material Contact Plating MINIATURE PUSH-PULL CONNECTOR FOR
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNCS6 Series Isolated 6W 4:1 Input Single Output DC/DC Converters
Isolated W : Input Single Output DC/DC Converters FEATURES RoHS compliant : Wide range voltage input Operating temperature range C to 8 C.% Typical load regulation.kvdc Isolation Effi ciency from % V &
More informationSilvertel. Ag Features. 2. Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL and SMT package available
Silvertel V2.2 Jan 2015 Datasheet Ag9700 Pb 1. Features IEEE802.3af compliant Small SIL and SMT package available Low cost, with minimal external components required Input voltage range 36V to 57V Short-circuit
More informationNME 5V & 12V Series Isolated 1W Single Output DC/DC Converters
FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 80% Wide temperature performance at full 1 watt load, 40 C to 85 C Power density 1.53W/cm 3 UL 94V-0 package material Footprint
More informationConnected Home OTRX 2-way 1.2GHz Regal Tap
5-1218MHz Hum and noise tested to ANSI/SCTE 16 2001 RF and power bypass capability Compatible with existing Regal Taps Available in faceplate only replacements Overview The Technetix OTRX series of Regal
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage Order Code1. Output
CRE1 Series www.murata-ps.com FEATURES UL 69 recognised3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load - C to 8 C4 Industry Standard Pinout 3.3V,
More informationFLT007A0Z/FLT007A0-SRZ Input Filter Modules 75Vdc Input Voltage Maximum; 7A Output Current Maximum
75Vdc Input Voltage Maximum; 7A Output Current Maximum Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Wireless Base stations Enterprise
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More information(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationSELECTION GUIDE. Input Voltage (V) Order code B0505XS-2W B0505XD-2W B0509XS-2W
(S)D-2W Isolated 2W Single Output DC/DC Converters SELECTION GUIDE Order code Input Voltage (V) Output Voltage (V) Output Current (MA) Input Current (Rated Load) (MA) Efficiency (%) Isolation Capacitance
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationT Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
More informationApplications GPC K 63 K31 TR12. Capacitance Tolerance K = ±10% M = ±20% Other tolerances on request F 117 S G 471 K 063 V
General Purpose, High Stability and AC Line EMI Suppression GPC Series Encapsulated Double Metallized, Size 2824 6560, 63 1,000 VDC Overview Film capacitor for surface mounting. Double sided metallized
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationMAX5986A Evaluation Kit Evaluates: MAX5986A
19-6349; Rev 0; 5/12 MAX5986A Evaluation Kit General Description The MAX5986A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationViking Series 10/100Base-TX/FX, Auto MDI/MDIx, Autonegotiable MIL-DTL-38999, Unmanaged Ethernet Switch
Viking Series 10/100Base-TX/FX, Auto MDI/MDIx, Autonegotiable MIL-DTL-38999, Unmanaged Ethernet Switch 6 Port (4+2), Flange Mounted FEATURES 4x10/100Base-TX nonblocking wire speed copper Ethernet ports
More informationRF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
More informationFAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
More informationLM317L 3-Terminal Adjustable Regulator
3-Terminal Adjustable Regulator General Description The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy to use
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationRail Product Selection Guide. Proven rail expertise. Global capabilities.
Rail Product Selection Guide Proven rail expertise. Global capabilities. We Connect When it matters most. UNDER CAR TRAIN CONTROL ITT Veam and Cannon connectors support today s advanced train control systems,
More informationNot for new design after March 31, 2016 Snap-In Supercapacitors S501 Series, Snap-In, 2.7 V, 65ºC
Snap-In Supercapacitors S501 Series, Snap-In, 2.7 V, 65ºC Overview KEMET S501 Series Supercapacitors use a proprietary electrode design to deliver a very high power density. This product features high
More informationUSER MANUAL. Maxwell Technologies BOOSTCAP 56V UPS Energy Storage Modules. Models: BMOD0130 P056 B02 BMOD0130 P056 B03. Document Number
USER MANUAL Maxwell Technologies BOOSTCAP 56V UPS Energy Storage Modules Models: BMOD0130 P056 B02 BMOD0130 P056 B03 Document Number 1017025 Notice: The products described herein are covered by one or
More informationData Sheet P4055 Pressure Transducer
Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code 1. V V ma
www.murata-ps.com CRE1 Series SELECTION GUIDE FEATURES UL 69 recognised 3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load -4 C to 85 C 4 Industry Standard
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationApplications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationDDC-49530/49590/55688/57470/57471/73089 THIN-FILM RESISTOR NETWORKS
Make sure the next Card you purchase has... THIN-FILM RESISTOR NETWORKS FEATURES High Reliability Precision Tolerance Lead Free Available DESCRIPTION Synchro/Resolver-to-Digital converters such as DDC
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationPart Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords
Part Number: 10GX F/UTP CMR PATCH CORDS 10GX F/UTP CMR Patch Cords Product Description 10GX F/UTP CMR Patch Cords Technical Specifications Product Overview Environmental Space: Suitable Applications: Riser
More informationNME 5V & 12V SERIES. Technical enquiries tel: +44 (0) Isolated 1W Single Output DC/DC Converters
FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 80% Wide temperature performance at full 1 watt load, 40 C to 85 C Power density 1.53W/cm 3 UL 94V-0 package material Footprint
More informationMulti-Phase Power Inductors CL0904 Series
Multi-Phase Power Inductors CL0904 Series HALOGEN HF FREE Pb Applications For exclusive use with Volterra VPR-Devices Environmental Data Storage temperature range: -40 C to +125 C Operating temperature
More informationANEMOMETER Vaisala WAA252
ANEMOMETER Vaisala WAA252 SIGNAL OUTPUT ELECTRICAL SUPPLY HEATING SUPPLY MODEL IN EOL MANAGER 0...750 Hz square wave 5...15 VDC 10mA typ. 24 VDC
More informationElectrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical Specifications @ C Operating
More informationTechnical Data Sheet Chip LED with Bi-Color(Multi-Color)
Technical Data Sheet Chip LED with Bi-Color(Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationHBB CONNECTOR SERIES. Engineering Superior Solutions. September 2015 Smiths Connectors. smithsconnectors.com
HBB CONNECTOR SERIES Engineering Superior Solutions September 2015 Smiths Connectors HBB CONNECTOR SERIES High Power, Quick Release Connectors 2 Table of Contents 4 PRODUCT OVERVIEW 9 COMPETITIVE ADVANTAGES
More informationFLT012A0Z/FLT012A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum; 12A Output Current Maximum
Features Compliant to RoHS EU Directive Directive 2011/65/EU (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) RoHS Compliant Applications Distributed power architectures Wireless
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationMPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
More informationApplications. Overview. Technical Specifications
FLLD4 TH, 53/35 VAC, 8 A High Performance Chassis Mount Three-Phase and Neutral Filters Overview These are compact, general purpose, three-phase + N filters, with terminal blocks for quick installation
More informationPowerCat 6 STP DataGate Plus TM
November 2004 PowerCat 6 STP DataGate Plus TM Contents: Release Announcement Data Sheets Sp. z o. o. Powązkowska 44 C Polska Tel. + 48 22 326 07 20 Fax + 48 22 326 07 30 Division Tel. 603-324-0200 Toll
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More informationApplications R46 3 N M. Capacitance Code (pf)
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
More informationJ-Series CIRCUIT BREAKER
J-Series CIRCUIT BREAKER Designed to provide high levels of circuit protection, the J-Series is a compact, low profile hydraulic magnetic circuit breaker ideally suited for high power density applications.
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationNCS12 Series Isolated 12W 4:1 Input Single & Dual Output DC/DC Converters
NCS1 Series Isolated 1W :1 Input Single & Dual Output DC/DC Converters FEATURES UL 95 recognition pending :1 Wide range voltage input Operating temperature range - C to 5 C Typical load regulation from.5%
More information2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
More informationSwitch Mode Power Supply S8JC-Z / S8JC-ZS / S8JX-G / S8JX-P / S8VK-G / S8VK-C. Power Supply Selection Guide
Switch Mode Supply S8JC-Z / S8JC-ZS / S8JX-G / S8JX-P / S8VK-G / S8VK-C Supply Selection Guide OMRON Supply Selection Guide Suitable for various situations from Machine to DIN Rail-mounting type General
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More information