Vehicle Summary. 362 Type: Length (ft): 0.0 Special Req. Height (ft): 0.0 U.S. Domestic Registry, 50-State Kingpin Inset (in): 0 Corner Radius (in): 0

Transcription

1 Page 1 of 10 Kenworth of Richfield H200 State of Ohio 2890 Brecksville Rd 1980 West Broad St Richfield, Ohio United States Columbus, Ohio United States Phone: (330) Phone: (614) Fax: (330) Fax: rgindlesperger Contact Prepared for: Vehicle Summary Unit Chassis Model: T400 Series Conventional. Fr Axle Load (lbs): Type: FULL TRUCK Rr Axle Load (lbs) Description: Tandem G.C.W. (lbs): Application Road Conditions: Intended Serv.: Snowplow. Vehicles which are configured for Class A (Highway) 85 Commodity: Gravel/crushed rock/sand Class B (Hwy/Mtn) 10 Class C (Off-Hwy) 05 Body Class D (Off-Road) 00 Type: End dump Maximum Grade: 6 Length (ft): 12.0 Wheelbase (in): 193 Height (ft): 10.0 Overhang (in): 97 Max Laden Weight (lbs): 4000 Fr Axle to BOC (in): 67 Cab to Axle (in): 126 Trailer Cab to EOF (in): 223 No. of Trailer Axles: 0 Overall Comb. Length (in): 362 Type: Length (ft): 0.0 Special Req. Height (ft): 0.0 U.S. Domestic Registry, 50-State Kingpin Inset (in): 0 Corner Radius (in): 0 Restrictions Length (ft): 120 Width (in): 102 Height (ft): 13.5 Approved by: Date: Note: All sales are F.O.B. designated plant of manufacture. Ask your dealer for a quote today, or visit our PACCAR Financial offers innovative finance, lease and insurance programs customized to meet your needs.

2 Page 2 of 10 Kenworth of Richfield H200 State of Ohio 2890 Brecksville Rd 1980 West Broad St Richfield, Ohio United States Columbus, Ohio United States Phone: (330) Phone: (614) Fax: (330) Fax: rgindlesperger Contact Prepared for: Model O T400 Series Conventional. 11, O T470 6x4 Class O CARB Idle Emissions Reduction Feature for PX-7 0 and PX O T470 6x4 Class O Gravel/crushed rock/sand O Snowplow. Vehicles which are configured for 0 mounting a snowplow to the front. May also have dump or other body. Typically includes some operation off of paved roads. Road usage: majority of Class A & B, do not code for Class D O End dump O U.S. Domestic Registry, 50-State 0 Engine & Equipment O PACCAR PX @ @ @ Includes turbo exhaust brake, no code is used. Diagnostic Plug for data link, Oil Cooler, Aluminum Flywheel Housing. N09200 N Standard Maximum Speed Limit [LSL] N09220 N Expiration Distance N09240 P Hard Maximum Speed Limit N09260 P Maximum Accelerator Pedal Vehicle Speed N09280 P Accelerator Lower Droop N09300 P Maximum Cruise Speed N09320 C Cruise Control Lower Droop N09360 N Reserve Speed Function Reset Distance N09380 N Maximum Cycle Distance N09400 N Maximum Active Distance N09420 N Reserve Speed Limit Offset N09440 P11 No...Engine Protection Shutdown N09460 P06 No...Gear Down Protection N09480 P Max PTO Speed N09500 P02 No...Cruise Control Auto Resume N09520 P04 No...Auto Engine Brake in Cruise N09540 N Expiration Distance N09560 P520 Yes..Enable Idle Shutdown Park Brake Set N09580 P Timer Setting N09600 P233 Yes..Enable Impending Shutdown Warning N09620 P Timer For Impending Shutdown Warning N09640 P Engine Load Threshold

3 Page 3 of 10 N09680 P33 No...Idle Shutdown Manual Overrule N09720 P230 Yes..Enable Hot Ambient Automatic Overrule N09740 P Low Ambient Temperature Threshold N09760 P Intermediate Ambient Temperature Threshold N09780 P High Ambient Temperature Threshold O Prospector Version Replaces O Effective VSL Setting NA O Engine Idle Shutdown Timer Disabled O Enable EIST Ambient Temp Overrule O Enable EIST in PTO Mode 0 Use only with MX and Cummins engines O Eff EIST NA Expiration Miles 0 Use only with MX and Cummins engines S Air compressor: Cummins 18.7 CFM, Cummins, PACCAR 0 PX engines S Engine mount Powercore air cleaner. 0 w/constant torque SS clamps, pop-up air restriction indicator. Pop-up indicator is standard O Fan Hub: Horton 2-Speed for ISL9, ISL-G, 0 PX-8 or PX O Cooling module: 1000 square inches 0 T170/T270/T370/T470. Includes metal surge tank on T170/T270/T S RH under cab DPF/SCR w/ RH SOC vertical tailpipe. 0 For use w/ daycabs, extended daycabs, or modular sleepers. T660 requires split fender hood O Tailpipe: 5 in. single 24 in. 45 degree curved O Davco Fuel Pro 382 Fuel Filter Return fuel heated 15 w/ integral thermostat. Includes water separator with Water-In-Fuel (WIF) sensor O Kenworth Fuel Cooler 6 Required for Cummins engines with a single fuel tank. Required for PACCAR MX-13 engine with a single fuel tank and stationary use: High RPM, low vehicle speed, sustained for longer than 1 hour. Optional for all other applications O Immersion block heater 120V 1000W w/plug under 0 door on C500, T660, T800 & W O Alternator: Bosch 200 amp, brush type O Batteries: 3 PACCAR GP31 threaded post (700) CCA dual purpose S Starter: PACCAR 12 volt electrical system. W/ 0 centralized power distribution incorporating plug-in style relays. Circuit protection for serviceability, 12-volt light system w/circuit protection circuits number & color coded.

4 Page 4 of O Battery disconnect switches 2, mounted on 2 battery box O Multi-function engine connector for body builder 0 interface for Cummins. Transmission & Clutch O Transmission: Allison 3000RDS 6-speed 291 w/pto drive gear. 5th Gen controls. Includes heat exchanger & oil level sensor. Rugged Duty Series for vocational applications. Transynd transmission fluid is standard on all Allison 1000, 2000, 3000 & 4000 series transmissions. Requires a push button shift control code. Oil temperature gauge is standard on class 8 models O Driveline: 2 medium-duty 1 centerbearing. 55 *Med duty is 1760 series O Torque converter included w/allison 0 Transmission O Pushbutton control center console mounted. 0 Class 8 with Allison Transmission O Delete Allison FuelSense O J1939 Park Brake Auto Neutral O PTO adapter for front engine PTO O Chassis will be fitted w/lh transmission PTO. 0 (PREVENTS ECU F/INTERFERING W/PTO ONLY) O Severe Service rear transmission support 15 spring(s). Front Axle & Equipment O Dana Spicer D2000 Front Axle rated 20K 120 standard track O Front Brakes: 22K Bendix ES S-cam 16.5x6 in O Front Brake Drum: 22,000 lbs. 16-1/2x6 in. Cast O Front Hubs Iron hub pilot 22,000 lbs. 10 Bolt x6in. or 7in. or air disc brakes. 10 Bolt, 11-1/4 in. bolt circle. Consider Wheelguards ( ) with aluminum wheels S ConMet PreSet Plus Hub package; front axle S Hubcap: front vented O Front Auto Slack Adjuster O Front Springs: Taperleaf 20K w/ shock absorbers 241 w/ maintenance-free elastomer spring pin bushings. Standard with rubber pins except for C500 which has threaded pins. W900S only. Not available on W900L. W900B use O Dual power steering gears: 20K Sheppard M100P O Power Steering Cooler: Radiator mounted air to 11 oil engines only is optional w/ 2006 or 2007 engines.

5 Page 5 of 10 Rear Axle & Equipment O Dual Meritor MP40-14x4 rear axle rated at 40K. 1,999 w/ heavy-wall housing with pump. Tandem rear axles O Rear Axle Ratio O Dual Rear Brakes 16-1/2x7 in. to 46K; 0 Bendix ES-extended service S-cam O Dual Rear Brake Drums: cast O Dual Rear Hubs: Aluminum hub pilot 46K /4 in. bolt circle O ConMet PreSet Plus Hub package; dual rear axle O Dual Rear axle automatic slack adjusters O Spring Brake: 3036 dual 30 square inches; square inches spring chamber O Bendix 4S/4M anti-lock brake system w/ air 2 traction control (ATC) O Inverted chambers for 16-1/2 x 7 in. brakes; 0 Replaces standard mount w/ higher mount O Interaxle driveline:1 Dana 1710 Series O Rear suspension: Tandem Hendrickson RT463 46K. 1, in. axle spacing. Steel beams & barpin bushing. 6 in. saddle height. Unladen Height: 11.1 in. Laden Height: 10 in. Tires & Wheels O Front tires: Bridgestone M860A 315/80R PR in. diameter, all position in. SLR O Rear tires: Bridgestone M799 12R PR in. diameter, drive in. SLR O Rear Tire Quantity: O Front wheel: Accuride X9 steel 70 Steel Armor[TM] powder coat, hub pilot mount lb. maximum rating. 5-hand holes O Rear wheel: Accuride x8.25 steel 80 Steel Armor[TM] powder coat, hub pilot mount. Heavy-duty 5 hand-hole hub pilot mount. Code is priced per pair of wheels O Powder coat white steel wheel. Use in conjunction 0 with front, dual front, rear, spare or lift axle wheel code(s). All wheels on chassis must have same finish color O Rear Wheel/Rim Quantity: 8 0 Frame & Equipment

6 Page 6 of O Frame Rails: 10-11/16 x 3-1/2 x 1/2 in. Steel in. to 416 in. Truck frame weight is 4.70 lb.-in. per pair of rails. Section modulus is 22.35, RBM is 2,683,000 in-lbs per rail. Frame rail availability may be restricted based upon application, axle/suspension capacity, fifth wheel setting, or component/dimensional specifications. The results of the engineering review may result in a change to the requested frame rail. If a change is required Kenworth Application Engineering will advise the dealer of the appropriate material specification for a substitute rail O Delete bumper: Requires a bumper setting code O 73 in. Bumper setting. Requires a bumper code O T470 W/ extended front frame rail. Must code 0 for rail separately S Front mudflaps O Custom Frame Layout: one chassis O Battery box cantilever aluminum BOC w/ 8 fiberglass cover O Battery box location: LH Side S T470,C5, T6, T8 non-polished DPF/SCR or CNG cover 30 diamond plate w/ step. For use w/ 2010 or later exhaust systems. For T8, use extended length non-polished battery box on opposite rail to match the length of under cab components S Rear mudflap arms: Betts B-25 standard-duty, 0 straight. Includes B1732 mounting brackets as standard S Rear mudflap shields: White plastic antisail w/ 0 Kenworth logo S Square end-of-frame w/ o crossmember;non-towing O Special frame drill: dealer to provide drawing 0 with dimensions and revision level. Acceptable hole diameters range from 10.2 mm to 40.4 mm. Preferred file format is.pdf. Not for use for rear suspension, fifth wheel or other published frame drilling code. Does not replace clear frame space requests or custom frame layout. Fuel Tanks & Equip O Fuel Tank: 75 US gallon 24.5in. aluminum under -33 replace. Class 8 fuel tanks w/ o locking caps include an anti-siphon device on the filler neck O DEF tank 6.9 clear BOC [CBOC], requires LH under -23 cab fuel tank. This tank has 6.9 gallons of useable volume. The tank will be located inboard of the LH under cab fuel tank. There is no frame space required to locate this tank. Not for use on sleeper chassis. Standard capacity is calculated by fuel capacity of the vehicle and will accommodate two diesel fill-ups for every DEF fill-up. For 1:1 DEF fuel fill ratio, add O Standard DEF to fuel fill ratio: 2:1 or greater O DEF tank location is on the LH. 0

7 Page 7 of O Location: 75 gal fuel tank LH under cab 0 Cab & Equipment S Cab: Curved Glass Conventional. 0 Cab Includes aluminum & fiberglass fully hucked cab w/ all aluminum bulkhead doors & continuous stainless steel piano-style door hinges. Single electric horn standard. Incandescent exterior lights include diagnosable bulb detection and warning. Trailer cable on tractors includes integrity detection. Standard features include multiplex wiring for interior lights, automated pre-trip inspection, short and open check diagnostics. Warning alarm will sound when lights are left on O Hood: T470 Sloped Hood for straight rail. 0 Includes radiator mounted grille, split fenders, mudflaps, & separate bumper S Cab heater: W/integral defrosters & A/C 45,000 0 btu cab heater. No sleeper heater/ac. Includes 5 mode rotary control. T660 include filter media S Steering wheel: 18 in. 4-spoke O Adjustable telescoping tilt steering column O Key Lock: Customer Specified Tumbler Part 0 Number. Only Includes Ignition and Doors O Five spare switches: Wired to power O Gauge: Dash mounted air filter restriction gauge S KW Driver Information Center: Includes fuel 0 economy, RPM display, trip information, truck information, diagnostics, gear display, alarm clock S Instrument package: Includes speedometer, 0 tachometer, fuel gauge, engine coolant temperature gauge, engine oil pressure, voltmeter. Class 8 also includes primary & secondary air reservoir gauges & an air application gauge. DEF level gauge and warning lamp are included with engines. Engine hour meter and outside air temperature readouts are standard. Primary read out will be MPH. Add to switch primary scale to KPH in Canada S Large flat panel on dash For customer-installed 0 controls. Reduces gauge count by S Cab Interior: Summit. T440/T470 Only. Includes 0 smooth upholstered side & back panels w/stitched accent lines, upholstered door pads, full vinyl headliner, black dash panels & black rubber floormats S Interior color: Slate Gray w/trim Dark Slate Gray 0

8 Page 8 of S Driver seat: Kenworth Air cushion Plus HB cloth. 0 Standard features includes 7 in. fore and aft slide adjustment w/isolator, 6-23 degree recline, air suspension with cover, dual armrests, and single chamber air lumbar support. Seat cushion is 20 inches wide w/ 2-position tilt and 2-position front cushion extension. Seat material has a horizontal stitch pattern and is 2-tone in color. Seat back is carpeted and includes a map pocket. Seat is manufactured by National. Includes inside visor and retractable 3-point matching seat belts. Grey seat belts S Rider seat: Kenworth Toolbox Plus HB cloth. 0 Standard features include fixed base and backrest, tool box seat base w/ door, and dual armrests. Seat cushion is 19.5 inches. Seat material has a horizontal stitch pattern and is 2-tone in color. Seat back is carpeted with a map pocket. Seat is manufactured by National. Includes inside visor and retractable 3-point matching seat belts. Grey seat belts S Seat color: Dark Slate Gray O Kenworth Radio with AM/FM/WB/USB and Bluetooth O CB binding posts: Located above cupholder 0 console. Includes one red power post & one black ground post. Wiring protected for 10 amps O Additional accessory power supply wiring. 0 In header O CB installation kit: Center mounted of header. 0 W/header mounted quick release CB mount. One red power post & one black ground post. Includes dual antenna leads located on the mirror brackets. Includes dual antenna & separate speaker O Under dash center console: Includes one cupholder 0 & two 12V outlets. For use w/autoshift, Ultrashift, & Allison Gen IV only S Non-self cancelling turn signal: W/column-mounted 0 headlight dimmer switch & intermittent wiper control S Electric LH & RH door locks S Cab access contoured grabhandles, LH/RH S Grabhandle LH inside door frame above dash S Grabhandle RH inside door frame above dash O DAYLITE DOOR: LH/RH INCL RH PEEPER WINDOW S Single air horn under cab S Look-Down, Pass. Door, Stainless 8.5x O Mirror: Dual Kenworth aerodynamic heated 26 motorized 7 in. x 13 in. mirrors. Mirror shell painted cab color, mirror arms black. LH/RH convex mirrors 5 in. x 7 in. heated. Mirror brackets set for 8-1/2 ft load width. Switch located on door pad S Rear Cab Stationary Window 17 in. x 36 in O Electric-powered LH & RH door window lifts. 0 Switch located on door.

9 Page 9 of O 1.5in x 11.5in Plastic Records Holder Mounted On 2 Rear Cab Panel S One-piece windshield, w/ curved glass O 2 in. rubber wheelwell fender extension O Link Cabmate suspension O Quiet Cab Package: For Non-VIT Interiors. 77 Includes Firewall Insulation & Floor Covering w/ Sound Deadening Materials and Cowl Blanket Lights & Instruments S Headlamps: Halogen Projector Low Beam, Halogen 0 Complex Reflector High Beam O Marker Lights: Five, rectangular, LED S Turn Signal Lights: Mounted on fender S Combination Stop, Tail, Turn & Backup Lights RH 0 & LH O Daytime Running Lamps S Marker Lights: Interrupter Switch. 0 Included in Turn Signal For All Models Except T3. The T3 Switch Is In The Dash O Switch & Wiring: For customer-installed plow 0 light. Includes circuit breaker O Junction Box: Mounted Behind Cab or Sleeper 1 Not Mounted at End of Frame O Circuit Breakers: Replacing fuses. Does not 0 apply to any 5-amp fuse box position. Breakers include stop/brake/turn, tail lamp, high & low beams, marker/clearance lamps, horn, fuel heat, gauges, air dryer, HVAC controls, panel lamps. Some circuits will remain fuses. Air Equipment S Air Dryer: Bendix AD-IS heated O Moisture ejection valve: Two Bendix DV-2 drain 0 valves on service tanks use w/ AD-IS only. Heated O Full truck kit: Gladhands mounted at end-of- 15 frame.seven-way female receptacle mounted at end-of-frame in taillamp bracket. Kit includes dash mounted trailer air supply valve, trailer hand control valve, and hoses/fittings for the valves. Dash mounted parking brake valve, tractor protection valve, and spring brake inversion/relay valves are standard S Nylon air tubing in frame & cab, excluding hoses 0 subject to excessive heat or flexing O Trailer ABS electric supply through SAE J pin connector per TMC RP137).

10 Page 10 of O Air tanks: aluminum replacing steel all tanks. -44 *NOT AIR TANKS ON LIFT AXLES Extended Warranty O Standard Warranty O EW: US Basic Vehicle 5 year/100,000 miles, 0 United States only O PACCAR PX-9 EW: Protection Plan 1, 2013 PX Years / 100,000 miles (160,935 km). Each code registered between 366 and 546 days after the vehicle s in-service date will be subject to a $400 late fee. Coverage cannot be added after 200,000 miles or 545 days past the in-service date O PACCAR PX-9 EW: Aftertreatment, use w/ Protection 0 Plan 1, 2013 PX-9-5 Years / 100,000 miles (160,935 km). Each code registered between 366 and 546 days after the vehicle s in-service date will be subject to a $400 late fee. Coverage cannot be added after 200,000 miles or 545 days past the in-service date. Miscellaneous O GHG Secondary Manufacturer: Does Not Apply 0 Paint O Paint color number. 0 N97020 A - L0006 WHITE N97200 FRAME N0001 BLACK O Day Cab Standard Paint O 1 - Color Paint - Day Cab 0 Color will be White if no other color is specified S Base coat/clear coat. 0 The Kenworth Color Selector contains additional instructions, as well as information on Kenworth paint guidelines and surface finish applications. Kenworth is standard with Dupont Imron Elite paint. Total Weight Prices and Specifications Subject to Change Without Notice.