ILLUSTRATED PARTS LIST MODEL NO CUSTOMER CATALOG NO. CTH3 PRODUCT NO Rev.

Size: px

Start display at page:

Download "ILLUSTRATED PARTS LIST MODEL NO CUSTOMER CATALOG NO. CTH3 PRODUCT NO Rev."

Valerie Miller
5 years ago
Views:

1 IPL, CTH3, , 0-0 CTH 3 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelarr

2 ILLUSTRATED PARTS LIST MODEL NO CUSTOMER CATALOG NO. CTH3 PRODUCT NO Rev.

3 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO DECALS NO. NO. DESCRIPTION Decal, Operators Decal, Hood Decal, Warning Eng. Symbols Decal, Hood Panel Decal, Chassis Hot Muffler Decal, Fender 00 DB/CE Decal, Oper Cruise Syms Decal, Rpl Kohl Decal, Saddle Brake Parking NO. NO. DESCRIPTION 53 - Decal, Cutfinger CE Decal, Mower V-Belt Schematic Decal, Brake/Clutch Symbol Decal, Warning Service/Fire Pad, Footrest, LH Pad, Footrest, RH Decal Bypass Decal Battery Door Manual Oper. Euro WHEELS AND TIRES Cap Valve Tire Stem Valve Rim Asm " Front Service Tube Front (Service Item Only) Tire F T 5 x 0 - Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Cap Axle Blk 50 x Tire R x Tube Rear (Service Item Only) Rim Asm " Rear Service Sealant, Tire (0 oz. Tube) wheel_art_-tex NOTE: All component dimensions given in U.S. inches inch = 5.4 mm

TRACTOR - - MODEL NO. CTH3 (9050000), PRODUCT NO.

SOLENOID RED STARTER M WHITE WHITE B G S M A L A

(PEDAL UP) GRAY ATTACHMENT CLUTCH (CLUTCH OFF)

YELLOW YELLOW SEAT SWITCH (NOT OCCUPIED) 3 GREEN

CONNECTOR BAG PRESENT SWITCH (BAG ATTACHED) NOTE

AS THE ENGINE SPEED IS INCREASED, THE LIGHTS WILL

/WHITE BLUE FULL BAG BUZZER BLUE FUEL LINE FUEL

SWITCH BROWN IGNITION UNIT (OPTIONAL) HOUR METER

SYSTEM OUTPUT 5 AMP AC @ 300 RPM ALTERNATOR 4

@ 300 RPM (CHARGING SYSTEM DISCONNECTED) VOLTS AC

5 9 CHASSIS HARNESS CONNECTOR (C) (MATING SIDE)

4 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO SCHEMATIC 3 SCH FUSE R E D BATTERY C RED SOLENOID RED STARTER M WHITE WHITE B G S M A L A BLK/WHT BLUE RED GREEN WHITE C 5 CLUTCH/BRAKE (PEDAL UP) GRAY ATTACHMENT CLUTCH (CLUTCH OFF) BLK/WHT REVERSE SWITCH (NOT IN REVERSE) GREEN YELLOW YELLOW SEAT SWITCH (NOT OCCUPIED) 3 GREEN GRAY 9 C BAG FULL SWITCH (NOT FULL) SHORTING CONNECTOR BAG PRESENT SWITCH (BAG ATTACHED) NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. THE LIGHTS ARE NOT CONNECTED TO THE BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE BRIGHTNESS OF THE LIGHTS WILL CHANGE WITH ENGINE SPEED. AT IDLE THE LIGHTS WILL DIM. AS THE ENGINE SPEED IS INCREASED, THE LIGHTS WILL BECOME THEIR BRIGHTEST. /WHITE BLUE FULL BAG BUZZER BLUE FUEL LINE FUEL SHUT-OFF SOLENOID (IF SO EQUIPPED) BLUE LIGHT SWITCH BROWN IGNITION UNIT (OPTIONAL) HOUR METER ORANGE CHARGING SYSTEM OUTPUT 3 AMP 300 RPM SPARK PLUGS GAP ( PLUGS ON TWIN CYL. ENGINES) BLUE V POWER OUTLET (OPTIONAL) LIGHTING SYSTEM OUTPUT 5 AMP 300 RPM ALTERNATOR 4 BROWN DIODE VOLTS AC 300 RPM (CHARGING SYSTEM DISCONNECTED) VOLTS AC 300 RPM (LIGHTS OFF) C IGNITION SWITCH HEADLIGHTS POSITION CIRCUIT OFF M+G+A RUN/OVERRIDE B+A RUN B+A START B+S+A MAKE L+A CHASSIS HARNESS CONNECTOR (C) (MATING SIDE) DASH HARNESS CONNECTOR (C) (MATING SIDE) WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVED FOR SERVICING OF UNIT, THEY SHOULD BE RE-INSTALLED TO PROPERLY SECURE YOUR WIRING. NON-REMOVABLE CONNECTIONS REMOVABLE CONNECTIONS

5 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO ELECTRICAL 3 TC03S With Service Minder Option

6 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO ELECTRICAL Battery Screw Hx Head Cap M x. mm 53-3 Switch Interlock Push-In Harness Socket Light w/45j Bulb Light Cable Starter Fuse Nut Keps Hex /4-0 unc Cable, Ground Switch, Seat Switch, Ign Key/Chain Switch Light/Reset Harness Ign. Dash Cover, Terminal Solenoid Screw Thdrol 5/- x 3/4 TYTT Harness Ign Socket Asm Nut Square M x..5 x mm Switch Interlock Clutch Cbl Screw Thd Cut /4-0 x / Harness Pigtail Switch Reverse TT GT Switch Full Bagger Indicator Switch Snapmount NOTE: All component dimensions given in U.S. inches inch = 5.4 mm 5

7 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO CHASSIS chassis-tex crd_tex LT HUSQ r3 9

3- Grille 5 53 44 - Lens RH 34 53 44-53 Plate Engine 3 0 05- Screw 5/- x 3/4 3 53 44 3-9

5 BOS Thread 3 53 40 5-90 Bumper Dash 50 53 40 5-3 Air Duct 5 53 40-0 Bracket Pivot 5 53

Extension,Bagger,Full 5 53 9 94- Crossmembermber 53 40 0- Screw 0-4 x 5/ 53 9 5- Bushing

9 00 05- Screw 5/- x 3/4 9 53 4 5-0 Insert Reflective RH 94 3 90 05-00 Nut Lock Hex

Side Hood RH 03 53 44 3-45 Vent Side Hood LH 04 53 44 3-5 Vent Top Hood 05 53 44 3-4

53 40 9- Rod Pivot Hood 53 9 3-95 X-Piece Hood Stop 53 9 5- Stud Fastener 34 53 40 4-4

53 40 4-3 Clip Tinnerman 53 4 4-0 Clip Retainer Console 3 53 44 05-3 Console Deck Lift

Reflective LH 30 53 - Bolt 5/- x 3/4 309 53 43 - Backplate 30 53 44-3 Bracket Hanger Bag

8 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO CHASSIS KEY PART NO. NO. DESCRIPTION Logo Dash Hood Lens LH Grille Lens RH Plate Engine Screw 5/- x 3/ Fender Nut Crown Lock 5/ Screw THDROL 5/- x / Screw #0 x 0.5 BOS Thread Bumper Dash Air Duct Bracket Pivot Shield Browning Screw Hexwsh Thrd 3/- x 3/ Screw Extension,Bagger,Full Crossmembermber Screw 0-4 x 5/ Bushing Steering Chassis Dash Lower Bolt 5/- x -/4 Full Thd Screw 5/- x 3/ Insert Reflective RH Nut Lock Hex Flange 5/ Plug Dash Srvmndr Plate Deck Lift Vent Side Hood RH Vent Side Hood LH Vent Top Hood Skirt Side RH Skirt Side LH Bolt 5/- x 3/ Clip Retainer Rod Pivot Hood X-Piece Hood Stop Stud Fastener Bumper Hood Spacer Fender Nut Lock 5/- unc Trim Clip Tinnerman Clip Retainer Console Console Deck Lift Husq Console SHFT Screw Hex WASHEAD /4-0 x 3/ Insert Reflective LH Bolt 5/- x 3/ Backplate Bracket Hanger Bag LH Bracket Hanger Bag LH Bracket Actuator Bolt Shoulder 5/- x Lever Bagger Door Battery Tray Latch Battery Door Support Fender Clip NOTE: All component dimensions given in U.S. inches inch = 5.4 mm

9 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO DRIVE * drive-tex CRD_K4_pedal_0

) 53 35-3 Key Square 53 40- Bushing Snap 5 9 3 3- Washer 3/3 x 3/ x Ga.

33 00 00-0 Ring E 35 53 40 0-3 Rod, Brake, Park 3 53-49 Washer 5/3 x -/4 x Ga.

Flat 5 3 90 0-00 Lock Nut 3/- 5 53 9 43- Idler V-Groove 5 53 44-34 V-Belt, Drive 53 43 -

5 90 53 44 3-05 Keeper Belt Clutching 99 53 44 39-4 Rod Bypass 03 3 35 05-00 Nut 5/- unc

Helical /4 3 49 05-0 Screw Thdrol 5/- x / TYTT 59 0 04- Pin Cotter / x 3/4 0 53 94-4

5 53 40 5-5 Latch Brake Parking 5 53 4 93-59 Shaft Asm.

5 0- Bolt 3/- unc x -3/4 53 9 43- Spacer Retainer 53 9 43-3 Link Clutch Ground Drive 9 53

05 53-4 Washer 5/3 x -5/ Ga. 0 53 40 09-0 Rocker Asm.

Retainer Spring 9 0-0 Washer Flat 53 40 5-4 Bracket Mount Torque 49 05- Screw 9 53 44 4-3

3 53 9-45 Washer Nylon 3 53 5- Hub Tapered 33 4 04- Bolt Hex Fin /4-0 unc x.

10 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO DRIVE 40 NO. NO. DESCRIPTION Transaxle, TUFFTORQ K4 DF (444) (Order parts from transaxle manufacturer.) Key Square Bushing Snap Washer 3/3 x 3/ x Ga Spring, Brake Rod, Brake Washer, 3/3 x x Ga Ring E Rod, Brake, Park Washer 5/3 x -/4 x Ga Nylon Snap In Cover, Foot Pedal Bolt 3/- unc Idler Flat Lock Nut 3/ Idler V-Groove V-Belt, Drive Pulley Transaxle Shaft Asm. Pedal Brake Control Bolt Hex 5/- x Keeper Belt Clutching Rod Bypass Nut 5/- unc Nut Lock Hex Flange 5/ Screw 5/- x 3/ Washer Lock Hvy. Helical / Screw Thdrol 5/- x / TYTT Pin Cotter / x 3/ Retainer Clip Spring, Return, Clutch Rod Control Nut Push Latch Brake Parking Shaft Asm. Cross Shift Spacer Axle Handle Park Brk Bolt 3/- unc x -3/ Spacer Retainer Link Clutch Ground Drive Bellcrank Ground Drive Bracket Brake Rod Washer /3 x / x Ga Washer 5/3 x -5/ Ga Rocker Asm. Pedal Pedal Forward Pad Pedal Reverse Bearing Nylon Retainer Spring Washer Flat Bracket Mount Torque Screw Subasm. Link Washer /3 x 5/ x Ga Plate Fstnr Washer Nylon Hub Tapered Bolt Hex Fin /4-0 unc x.gd Retainer, Belt Screw Thdrol 5/- x Spacer Transaxle Tex CRD Washer Spacer Pulley V Idler Ground Drive Strap Torue K4 CRD Tex Bracket Deck Sway Bracket Idler Bracket Idler RH Bracket Nut 5/ Idler Flat Bracket Idler * Parts supplied by manufacturer NOTE: All component dimensions given in U.S. inches inch = 5.4 mm 9

11 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO ENGINE SPARK ARRESTER KIT engine-tex_kohl_3_r

12 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO ENGINE 4 Engine Kohler Model No. SV530-0(Order parts from engine manufacturer.) Muffler Keeper Belt Engine Pulley Engine Tank Fuel Cap Fuel Control Throttle Screw #0 x 0.5 BOS Thread Fuel Line Spark Arrester Kit Clamp Hose Washer Nut Keps Hex /4-0 unc Gasket (Order From Eng. Mfgr.) Screw Socket 5/- x Bolt 5/- unc x 3/4 w/sems Bolt Hex /-0 x 4 Gr Screw 3/- x 9 0- Screw 3/- x Tube Exhaust Washer 9/3 x / x Ga Screw /4-0 x 3/ Screw 5/- x Cover Pulley Extension Oil Drain NOTE: All component dimensions given in U.S. inches inch = 5.4 mm

13 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO STEERING ASSEMBLY steering-tex_husqsr r

14 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO STEERING ASSEMBLY Wheel, Steering Husq SR Axle Asm., Front Spindle Asm., LH Spindle Asm., RH Bearing, Race Thrust Harden 53-4 Washer 5/3 x -5/ x Ga Ring, Klip #T Cap, Spindle Washer 5/3 x -/4 x Ga Washer, Lock Hvy Hlcl Spr 3/ Nut, Crown Lock 3/-4 unf Shaft Steering Plate Steering Boot, Steering 53-3 Adapter, Wheel Steering Strg. Supt. Lower Insert, Wheel, Steering Husq SR Screw 3/- x 3/ Washer Lock 5/ Gear, Sector Plate Washer /3 x 3/ x Ga Washer Hardened.93 x.3 x Bracket Upstop Bolt Shoulder Sector Pivot CFM Washer Thrust Sector Steering Nut Flange Lock 5/ Draglink, LH Draglink, RH Screw 5/- x 3/ Retainer Clip Spring Steering Bolt Hex Fghd /- x 3 Serr Bushing PM Front Axle Nut Lock Flange /- Gr Washer.5 x.505 x Bracket Deck Susp. Front Shaft Extension Steering Bolt Fin Hx 5/- x 4 w/patch Bushing, Axle Cap, Gear NOTE: All component dimensions given in U.S. inches inch = 5.4 mm 3

15 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO MOWER DECK tex-deck_crd_3_r 3

Lock Hex Flange 5/ - 5 00 05-0 Bolt 5/- 53 4 3-5 Screw #0 x 0.

0-34 Nut Flange Lock Top 53-90 Washer Spacer Mandrel 9 53 04-5

Thdrol 3/ - x -3/4 53 43 9- V-Belt Drive 3 53 40 - Spring Return

N/Greaseable3 35 53 4 9-4 Blade Mower LH 3 53 9 30-03 Bolt/Washer

40 53 9-5 Keeper Belt Engine LH 4 00 05- Screw 5/- x 3/4 43 53 9

Clutch Cable 0 53 40-4 Clutch Asm Manual LT Pred 0-0 Screw Thdrol

Washout Port 4 53 43 5-0 Keeper Belt LH Mandrel 5 53 4 9-5 Blade

0 03 0-00 Washer Lock Hvy 3/ 53 0-9 Washer Hard Blade Mower Vented

Clutch Cable 95 00 0- Screw 3/- x 3/4 9 53 40 0- Spacer 9 53 0-

Suspension Mower Rear 00 53 9 5-39 Bolt Shoulder 0 3-09-00 Nut 9/-

Vent 04 53 44-9 Mandrel Cover RH 05 53 44 - Mandrel Cover LH 0 53

Output 53 43 9-9 Gasket Gearcase 53 44 3-5 Shaft Gearcase 3 53 43

43 - Gearcase Subasm 0 53 43 9-9 Keeper Belt RH 53 43 9-5 Washer

Chasses 53 9 34-0 Bolt Shoulder 3/- x 3-5/ Gr.

9-39 Washout Port Remote 3 00 00-9 Ring Klip #T5304-5 3 53 44 0-43

16 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO MOWER DECK Deck Weldment Nut Lock Hex Flange 5/ Bolt 5/ Screw #0 x 0.50 BOS Thread Screw 3/- x Screw Thd Roll /4-0 x 5/ 3 0- Bolt Carr Sh 3/ - x - / Gr Keeper Belt Idler Nut Lock FlG 3/ - unc Nut Flange Lock Top Washer Spacer Mandrel Bearing Ball Mandrel Screw Thread Roll Screw Thdrol 3/ - x -3/ V-Belt Drive Spring Return Deck Housing Mandrel 4pt Service Shaft Asm Mndrl N/Greaseable Blade Mower LH Bolt/Washer Asm / - 0 unf Washer 3/3 x 3/ x Ga Keeper Belt Engine LH Screw 5/- x 3/ Pulley Mandrel Housing Mandrel Handle Clutch Cable Clutch Asm Manual LT Pred 0-0 Screw Thdrol 3/- x / Chute Upper Pulley Idler Flat Washout Port Keeper Belt LH Mandrel Blade Mower RH 53-3 Bolt 3-4 x.50 Gr Washer Lock Hvy 3/ Washer Hard Blade Mower Vented Arm Brake 9 LH Spacer Retainer Washer 3/3 x -/4 x Ga Rod Brake Arm Brake RH Bracket Clutch Cable Screw 3/- x 3/ Spacer Shield Idler Mower Stud Fastener Arm Suspension Mower Rear Bolt Shoulder Nut 9/ Spacer Bearing Swing Plate Guard Front Vent Mandrel Cover RH Mandrel Cover LH Spring Brake Return Knob Handle Gear Output Gasket Gearcase Shaft Gearcase Plug Oil Valve Relief Screw Torx #0-4 x 04- Bolt /4-0 x.5 Gr Nut Hex Flange /4-0 unc Arm Clutching Gearcase Subasm Keeper Belt RH Washer Non Greasable Mandrel Shaft Bracket Idler Chasses Bolt Shoulder 3/- x 3-5/ Gr Wheel Guage Rod Anti-Sway Washer 3/3 x 3/ x Ga Pin Cotter 5/ Bow Tie Lock Nut Push Washout Port Remote Ring Klip #T Hose 3/- Long " Hose 3/ Clamp Guard Asm. LH French Guard Asm. RH French Cable Clutch Manual w/spring Mandrel Assembly (Includes Housing, Shaft Assembly, And Bearing Only - Pulley/Nut/Washer And Blade Bolt/Washers Not Included) Replacement Mower Complete NOTE: All component dimensions given in U.S. inches inch = 5.4 mmm 5

substituted for Key 0 53 43 9-9 Deck Lift Weldment 3 53 9 5-3 Lever Asm.

Cotter / Bow Tie Lock 53 43 9-95 Spring Lift Assist 9 9 9 9- Washer Clear

Rear 9 49 0-0 Screw Thdrol 3/- x / 9 53 9 5-0 Link Lift Susp.

17 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO MOWER LIFT * 9 lift-tex_ *Key 9 may be substituted for Key Deck Lift Weldment Lever Asm., Lift RH Grip, Lever Spring Torsion Pin Cotter / Bow Tie Lock Spring Lift Assist Washer Clear Zinc Pin Cotter 5/ Bow Tie Lock Link Lift Susp Mower Rear Screw Thdrol 3/- x / Link Lift Susp. Front Mower Nut Centerlock 3/ Link Asm Lift FXD NOTE: All component dimensions given in U.S. inches inch = 5.4 mm

18 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO SEAT ASSEMBLY seat-tex_a-vgt KEY NO. 3 0 PART NO DESCRIPTION Seat Bracket Pivot Fender Strap, Asm Fender Nut, Lock w/ins. 3/- unc Spring, Seat Cprsn Bolt 5/- unc x 3/4 w/sems Pan, Seat Bolt, Shoulder 5/- KEY NO. PART NO. DESCRIPTION Nut, Lock 5/- unc Handle Slide Spring Latch Bolt Fin Hex 3/- unc x 3/4 Washer 3/3 x -3/ x Ga. NOTE: All component dimensions given in U.S. inches inch = 5.4 mm

19 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO BAGGER Bagger_TEX CRD_

Bagger 53-5 Drilled Rivet 3 90 04-00 Nut Hex

Insert Handle Bagger 0 53 43-0 Frame Front 53 43

50 5 53 4-0 Screw # FLHD Drill Tip 9 53 9 4-0

Carr /4-0 x /4 5 53 4 - Spring Latch Bagger 49

Grip Handle Black 30 53 43 4-5 Plug 3 53 43 5-

53 43 4-5 Shaft Tex CRD Mulch Plug 34 53 43 9-

43 90-9 Bolt J 3 53 0 9-0 Nut Lock #0-4 unc 3 9 0

39 53 43 9-4 Bungee Tex CRD 40 53 43 94- Support

20 TRACTOR - - MODEL NO. CTH3 ( ), PRODUCT NO BAGGER Tube Handle Bagger Applique Top Nut Push Top Tube Frame Asm Top Bagger 53-5 Drilled Rivet Nut Hex Flange /4-0 unc Cover Bagger Insert Handle Bagger Frame Front Tubing Brace Bagger Nut Square / Screw /4 x.50 Hx Wsh Bolt Shoulder Hx Wsh /4 x Screw # FLHD Drill Tip Retainer Spring Bag Ams Bolt Carr /4-0 x / Spring Latch Bagger Screw /4-0 x 3/ Grommet Rubber Grip Handle Black Plug Pin Hinge Spring Double Torsion Shaft Tex CRD Mulch Plug E-Ring 5/ Grip Mulch Plug Hand Bolt J Nut Lock #0-4 unc Washer /3 x / Ga Bungee Tex CRD Support Bagger Corner RH Support Bagger Conrer LH Brace Side Tube NOTE: All component dimensions given in U.S. inches inch = 5.4 mm 9

21 0.3.3 SR

LTH1797. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar SERVICE I IPL, LTH1797, ,

LTH1797. Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar SERVICE I IPL, LTH1797, , SERVICE I00034 IPL, LTH9, 00-04, 544 3 3-0 90400500 LTH9 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 544 3 3-0 DECALS 5 4 9 5 5 8 9 0 3 3 53 40 03-89 Decal, Operators