2" LED Downlight Open & Wall Wash D2LED 120V or 277V High Output

Transcription

1 2" LED Downlight Open & Wall Wash D2LED 120V or 277V High Output DTE: FIRM NME: PROJECT: TYPE: CTLOG NUMER: Order accessories separately SSEMLY D2LED 2" J-tube assembly with 0-10V Dimming Standard PPLICTIONS: rchitektūr D2LED Series is a 2 specification grade LED downlight that combines superior brightness control with energy savings and low maintenance costs. Suitable for a variety of commercial, retail, and institutional applications with ambient temperatures up to 35ºC (9L) or 25ºC (12L) during operation with free airflow around the fixture. SSEMLY: Utilizing Prescolite's revolutionary J-Tube design and optimal thermal management, the D2LED eliminates the need for a traditional downlight housing. The J-Tube assembly combines the traditional J-ox and driver electronics into a compact form that can be accessed from below the ceiling plane. These features allow the D2LED to ship as a single unit which can be completely wired and installed from below the ceiling plane. It can also be easily removed from below the ceiling if servicing or an upgrade to new technology is ever required. : High purity spun aluminum self-flanged reflector with iridescence suppressed lzak anodized finishes. lso available with Prescolite's mericanmatte finish (MFC). Factory configurable optics provide 25º, 35º, or optical options for a variety of applications. novel Wall Wash optical system is also available to provide an unequalled wall wash optical from the same small aperture. VOLTGE lank 120V V OPTIONS _ lank Standard 0-10V dimming HDM 5 Hi-Lume 1% 3-wire/ EcoSystem LED Driver LDM Leading Edge dimming to 10% (12L & 120V only) DM01 5 ELDO LED 0-10V dimming to less than 1%. LIGHT ENGINE 2D9LED 2" Open Reflector/ Light Engine ssembly with Xicato module LED LIGHT ENGINE: High output Xicato LED Module (IP66 rated). Color consistency held to less than 2 SDCMs for fixture to fixture and over-time color consistency. Secured to an extruded aluminum heat sink for excellent thermal management providing optimal life and lumen maintenance (minimum 50,000 hours at 70% lumen maintenance). LED DRIVER: Energy efficient electronic constant current driver with 50,000 hour minimum anticipated life. Meets UL Class 2, FCC 47CFR Part 15, Class compliant, inherent short-circuit protection, self limited, overload protected. DIMMING: Comes standard with 0-10V dimming capability. Flicker-free dimming to 10%. For sizing control systems, the 0-10V control circuit will draw up to 1 m. lso available with 0-10V to below 1%, Lutron Ecosystem to 1%, and Leading Edge to 10%. 2-3/4" CERTIFICTIONS: CS C/US certified to UL1598. Suitable for wet locations. Non IC rated and 2IN/2OUT through branch wiring. For connection to flexible conduit only. CEILING WRRNTY: CUTOUT* 5 Year Warranty. Go to for full details. OUTPUT 9L Delivered Lumens 12L 2, Delivered Lumens LED COLOR 27K K K K /8" S EM NGLE DIM "" WFL45 5-7/8" FL35 6-3/4" MD25 7-1/2" WW 7" CRI 8 Nominal 80+ CRI 9 6 Nominal 95 CRI 1 Requires WT option 2 See page 2 for specific lumens per module and raw lumens. 3 See Central Inverter compatibility note and web links on page 4. 4 See page 5 for line art. 5 HDM and DM01 not compatible with D2ICT/D2CP. 6 See page 5 for important product life and warranty information when used with the 12L or 95 CRI options. 7 Not available with white paint EM NGLE *Note: The accuracy of the ceiling cutout is critical to the proper fit of the D2LED. For installation hints see page (?) or download the instruction sheet from CEILING CUTOUT* WFL45 luminum reflector with a wide flood FL35 luminum reflector with 35º flood MD25 luminum reflector with 25º medium WW Wall Wash C 2-3/4" 3-1/8" S EM NGLE DIM "" WFL45 5-7/8" FL35 6-3/4" MD25 7-1/2" WW 7" OPTIONS DIM "" DIM "C" STNDRD 7-3/4" 9-1/2" HDM 16-1/4" 18" LDM 6" 7-3/4" DM01 10" 11-3/4" 2-1/2" EXMPLE: D2LED277VHDM-2D9LED9L30K8WFL45 FINISH lank Specular SS Semi-Specular MFC 7 merican Matte V Specular VS Softglow VSS SoftSheen *Note: The accuracy of the ceiling cutout cutout is critical is to to the the proper proper fit of the fit D2LED. of the D2LED. For *Note: The accuracy of ceiling installation For hints see page page (?) or download 4 or download the the instruction sheet from instruction sheet from COLOR lank Clear lzak CG Champagne Gold lzak GD Gold lzak L lack lzak WE Wheat lzak LW Light Wheat lzak PW Pewter lzak WH 1 White Paint OPTION WT White Trim Ceiling Cutout: 2 7 /8" Ceiling Thickness 1 /2"-1 1 /4" For conversion to millimeters, multiply inches by 25.4 Not to Scale KNOCK-OUT 0-10V DIMMING MODELS ONLY LINE VOLTGE CONDUIT OPENING _ C OPTIONS DIM "" DIM "C" STNDRD 7-3/4" 9-1/2" HDM 16-1/4" 18" LDM 6" 7-3/4" DM01 10" 11-3/4" CCESSORIES 2-1/2" LiteGear 3 Inverter, single phase central lighting, 125V-250V LPS Series 3 LitePower micro-inverter, 20V- 55V D2FRM 4 Optional Mounting frame for the D2LED fixture. D2ICT 4,5 Optional IC Rated, ir Tight housing for the D2LED. D2GR White ring for D2LED fixture D2CP 4,5 Optional CCE compliant housing for the D2LED Division of Hubbell Lighting, Inc. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. RCH-LED-010

2 rchitektū r - 2" D2LED Downlight ELECTRICL DT D2LED9L8 D2LED9L9 D2LED12L8 D2LED12L9 Input Voltage 120/277V 120/277V 120/277V 120/277V Input Frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Input Current 0.14/ / / /0.08 Input Power 17 Watts 21 Watts 24 Watts 22 Watts Constant Current Output 760m 760m 700m 700m Power Factor EMI Filtering FCC 47CFR FCC 47CFR FCC 47CFR FCC 47CFR Part 15, Class Part 15, Class Part 15, Class Part 15, Class Fixture Operating Temperature -30ºC to 35ºC -30ºC to 35ºC -30ºC to 25ºC -30ºC to 25ºC Dimming 0-10V to 10% 0-10V to 10% 0-10V to 10% 0-10V to 10% Over-voltage, over-current, (short-circuit protected, and over-temperature protection with auto recovery) Lumen Multipliers For Various lzak Colors Clear Specular 1.00 Pewter Specular 0.94 Champagne Gold Specular 0.96 Gold Specular 0.86 Wheat Specular 0.86 Light Wheat Specular 0.84 lack Specular 0.62 Lumen Multiplier For CRI Options 80+ CRI 95 CRI 12L L *For exact lumen outputs, please visit to find IES reports 12L 9L Xicato Module Chart 80+ CRI 95 CRI Drive Current m 760 m Xicato XSM Module Module Delivered Lumens Xicato XSM Module Module Delivered Lumens Note: These values are based upon the WFL45 Reflectors. D2LED-2D9LED12L30K8WFL45 Fixture delivered lumens: 1235 Fixture Efficacy: 56 Spacing Criteria: º º DEG CNDEL LUMENS º 0 15º 15 30º 30 Test No ZONL LUMEN SUMMRY D2LED2D9LED12L30K8WFL45 Test No Millennium lvd., Greenville, SC U.S.. Phone (864) 678-

3 rchitektū r - 2" D2LED Downlight D2LED-2D9LED12L30K8FL35 Fixture delivered lumens: 1118 Fixture Efficacy: 50.8 Spacing Criteria: º 15º 15 30º 30 75º 75 60º 60 DEG CNDEL LUMENS Test No ZONL LUMEN SUMMRY D2LED2D9LED12L30K8FL35 Test No D2LED-2D9LED12L30K8MD25 Fixture delivered lumens: 1062 Fixture Efficacy: 48.3 Spacing Criteria: º 15º 15 30º º 75 75º 60 60º DEG CNDEL LUMENS Test No ZONL LUMEN SUMMRY D2LED2D9LED12L30K8MD25 Test No NOTES Refer to for additional photometric tests (IES Files). 701 Millennium lvd., Greenville, SC U.S.. Phone (864) 678-

4 D2LED-2D9LED12L30K8WW W Fixture Delivered Lumens: 1006 Fixture Efficacy: º º º 15 15º 30 30º LEGEND: 0-deg 0-deg: 90-deg: 180-deg: (wall side) (room side) DEG Test No ngle in Vertical 0 DEG 90 DEG 180 DEG DISTNCE FROM CEILING IN FEET MULTIPLE UNITS UNITS ON UNITS ON 3 CENTER 4 CENTER 3 DISTNCE FIXTURE MOUNTED OUT FROM WLLS FOOTCNDLE DISTRIUTION ON WLL SURFCE D2LED 2D9LED12L30K8WW Test No Central Inverters For full fixture output in back-up mode, we recommend you visit for your Central Lighting Inverter options. Please contact your local Hubbell representative for any assistance with proper sizing and loading of your inverter selection. Central lighting inverters must be ordered separately. LiteGear: LPS Series: INSTLLTION HINTS Daisy Chain: Often times through branch wiring (Daisy Chaining) will be desired for installation of the D2LED in an application. There is one knock out available in the J-tube for the line voltage, and one for the low voltage control wires. To accomplish 2in/2out through branch wiring. Prescolite suggests the use of an rlington Duplex Connector (PN 4040ST). Ceiling Cut-out: Due to the discrete trim flange on the D2LED, the accuracy of the ceiling cut-out is critical to achieving the best results. Prescolite recommends making this cut-out with a hole saw, such as one manufactured by the Morse Company (TC46 and TCPD4). Ceiling Clearance: When using the standard driver and J-Tube, 8" of plenum clearance is recommended when no top access is available to the J-Tube 701 Millennium lvd., Greenville, SC U.S.. Phone (864) 678-

5 Dimming Compatibility Table Dimming Driver Manufacturer Web Link Standard DM01 Lutron DVTV Standard DM01 Leviton WRMG-7xx, WSMG-7xx, WSMT-7xx HDM Lutron LDM Lutron MELV-600, SPSELV-600, NTELV-300 Leviton 6615-P, LW, Frame ccessories 11-3/4" 1" 8" X 8" POLYCRONTE CUTOUT RE 11-5/8" FLEX CONDUIT HOLDING CLIPS 14-3/8" SEISMIC TETHER 11" 14-3/8" 10-1/2" Entry Points For 3/8" Max. MC Flex. See instruction sheet for installation details. D2ICT/D2CP D2FRM D2FRM * Note: Use of the D2ICT and D2CP can cause heat entrapment, which while safe to use, can shorten the expected life of this product from > 50,000 hours to 25,000 hours when used with the 12L or 95 CRI options. The product warranty in these applications will be 5 years, or 25,000 hours, which ever comes first. *Note: Ceiling thickness maximum when using D2ICT or D2CP is 5/8". Ceiling thickness maximum when using D2FRM is 1". ar hangers not included, order 6 for ceiling joists up to 24" centers or 24 for T-bar ceilings. *Note: The standard product is designed and listed to be installed into most ceiling types without the use of an accessory frame. These frames are provided as an optional accessory to be used when desired by the end user to provide extra support or required by local code. *Note: CP versions require the use of the D2ICT accessory modified with metal plate in place of polycarbonate. 701 Millennium lvd., Greenville, SC U.S.. Phone (864) 678-