Complete Catalog # Example Includes (Rough-In, option, reflector, accessory): SD8 15LM 30K MVOLT G5 80CRI ZT CP D CS PF HBTL ROUGH-IN OPTIONS

Transcription

1 ENVIRONMENTLLY FRIENDLY, ENERGY EFFICIENT Suitable for ceiling heights from 8 to 50 Comparable light output to 75W PR30 to 500W T4 Quartz while consuming 15 to 75 watts. No harmful ultraviolet or infrared wavelengths No lead or mercury PRODUCT SPECIFICTIONS OPTICS Cone: Self-flanged or flangeless clear lzak diffuse (CD) cone lzak cone with low iridescent finish is standard Others lzak finishes are available; see trim options Computer-optimized reflector maximizes fixture efficiency Deep regression of source produces a very low glare system Lensed mixing chamber conceals the LEDs to produce uniform aperture luminance : Must be used with IFM4 accessory ELECTRICL LED Light Engine: Innovative light engine utilizes remote phosphor lens and mixing chamber to ensure perfectly mixed light, resulting in uniform colors and superior color consistency from fixture to fixture 2700K, K, 3500K and 0K color temperatures available CRI>80 and CRI>90 Cast aluminum heat sink integrated directly with housing provides superior thermal management with LEDs operating below manufacturer s published junction temperature to ensure attainment of rated life of the LEDs Light engine mounts directly to heat sink and is easily replaceable Light engine/reflector system produces 1100 to 5000 lumens while using only 15 to 75 watts of energy and incorporates the latest generation of high lumen LEDs. LED Driver: Power factor >0.9 Easily replaceable from above or below the ceiling Dimmable via 0-10V protocol, increasing efficiency up to 30% while dimming For a list of compatible dimmers, see LED-DIM For other Dimming options see Rough-in ordering options Life: Rated for 50,000 hours at 70% lumen maintenance MECHNICL Housing: Future Proof and ackward Compatible using the proprietary Indy platform design (see pg. 2 of spec sheet) Heavy gauge cold rolled steel with black finish Universal housing design installs in suspended grid, plaster or drywall Integral cast aluminum heat sink conducts heat away from LED light engine Light engine and driver are accessible from above and below ceiling and can be upgraded to accommodate future technology improvements. Mounting Frame: Heavy gauge steel lower housing ring with factory installed spring steel friction clips securely hold self-flanged cones in ceiling Integrated torsion springs to hold flangeless cone in ceiling ccommodates ceilings up to 3/4 thick For thicker ceilings; consult factory Mounting racket: Mounting brackets have 3 vertical adjustment and accept proprietary Tru-Lock bar hangers, 1-1/2 C-channel and flat linear bars (ordered as accessories) or 1/2 EMT, 3/4 and 1-1/2 lathing channel (by others) One-piece Tru-Lock bar hangers have integral T-bar locking screws and alignment notches for locating and locking fixture in the center or 1/4 tile increments Junction ox: Junction box rated for eight No. 12 WG 90 C branch circuit conductors (4-in, 4-out, not applicable for 5000 lumens) dapter (FM option): llows drywall to be finished flush with cone flange. LELS ND LISTINGS UL listed for feed through and damp locations U.L. Spacing required for 5000 lumen unit: minimum of 4 between fixture centers, 3 overhead clearance and 2 from fixture center to side wall I..E.W. Union made Wet Location listing available, see reflector ordering options EMI complies with FCC 47, Part 15, Class UL and cul, RoHS compliant ENERGY STR Certified, see page 2 for designated products RR compliant Warranty-5YR: 5-year limited warranty. Complete warranty terms located at: Specifications subject to change without notice. ORDERING INFORMTION: SERIES SD8 SD8 8 Designer Series Round New Construction Downlight See mounting for LIGHT ENGINE LUMENS 11LM 1100 Lumens 15LM 1500 Lumens 20LM Lumens 30LM Lumens 40LM 0 Lumens 50LM 5000 Lumens COLOR TEMP. 27K 2700K 30K K 35K 3500K 40K 0K CCESSORIES CCESSORY OPTIONS VOLTGE Volt Volt Volt MVOLT Multi-Volt ( Volt) IFM8 8 Round flangeless adapter for drywall ceilings (Required) H28 28" C-Channel ar Hangers, Pair H52 52" C-Channel ar Hangers, Pair HTL 25" Tru-Lock Grid Ceiling ar Hangers, Pair SC8/XX 8 Sloped Ceiling dapter - must be specified when ordering: XX = 05/10/15/20/25/30 ROUGH-IN GENER- TION CRI G5 Generation 5 80CRI 80+ CRI 90CRI 90+ CRI DRIVER FDL PD ZT DLI EZ1 EZ Forward Phase Dimming F Lutron Driver (2-wire dimming, neutral wire CP required) (up to P 80CRI; up to 90CRI) Lutron Ecosystem NL Dimming Driver (up to 80CRI; up to 90CRI) 0-10V Dimming (up to CRI, up to 90CRI) DLI Control Dimming eldoled 0-10V ECO driver. Linear dimming to 1% min. (Up to lumens max.) eldoled 0-10V Solo driver. Logarithmic dimming to <1% (Up to lumens max.) ROUGH-IN OPTIONS NLER Fuse and Fuse Holder Chicago Plenum 120/277V Emergency attery Pack w/remote Test Switch nlight Dimming Pack Controls. (Not compatible with CP option). Only use w/ ZT, EZ1 and EZ drivers. nlight dimming pack controls. ER controls fixtures on emergency circuit operation (Not compatible with CP option). Only use w/ ZT, EZ1 and EZ drivers. Project: Notes: 7-3/8 Dia. *17-1/8 14-3/4 13-1/8 (120/277V) 15-5/8 (347V) * 5000 lumens, NL, NLER, CP & 347V options only 1300 S. Wolf Road Des Plaines, IL 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity rands Lighting, Inc. Rev. 10/06/17 1 of 5 D Self-Flanged TRIM STYLE Downlight Type DIMENSIONS 7-5/8 Self-Flanged DESIGNER SERIES to 5000 LUMEN LED ROUND DOWNLIGHT OPEN PERTURE SD8 SERIES Cat. No. FINISH D lack Diffuse PF S lack Specular ZD ronze Diffuse ZS ronze Specular CD Clear Diffuse WET CS Clear Specular CSS Clear Semi-Specular GD Gold Diffuse GS Gold Specular PTD Pewter Diffuse PTS Pewter Specular WH White WTD Wheat Diffuse WTS Wheat Specular TRIM OPTIONS White Flange (Not required when specifying WH finish) Wet Location (Not available w/ FM option) Ceiling Cutout 7 7/8 Round Cutout 8 1/4 Round Cutout Complete Catalog # Example Includes (Rough-In, option, reflector, accessory): SD8 15LM 30K MVOLT G5 80CRI ZT CP D CS PF HTL REFLECTOR* Specify MVOLT or 347 for Standard 0-10V Driver Specify required voltage for 50LM, PD, DLI, F, NL, NLER, EZ1, EZ options (PD and DLI not available for 0 lumens and up) 120V only + To order flangeless Rough-In separately, add FM to end of part number. Ex: SD8 15LM 30K MVOLT G5 80CRI ZT FM MOUNTING lank Flanged +FM (must be ordered with IFM8 accessory) * To order reflector separately, use series and reflector option values. Ex: SD8 D CS PF + Capable options indicated by this color background

2 Simply take the latest generation LED system (Designer Series Gen 5) and upgrade the previous generation rough-ins. ENGINEERING DT: Light Engine Lumens Voltage 120V 277V 347V 120V 277V 347V 120V 277V 347V 120V 277V 347V 120V 277V 347V 120V 277V 347V CCT 27K/30K/35K/40K 27K/30K/35K/40K 27K/30K/35K/40K 27K/30K/35K/40K 27K/30K/35K/40K 27K/30K/35K/40K Input Current Input Wattage Input Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz THD% Power Factor ENERGY STR certified: SD8 PRODUCT# FIXTURE CONFIGURTIONS = ENERGY STR SD8 (XXLM) (YYK) MVOLT G5 80CRI ( * ); SD8 D CS Lumen Package: 1100/1500///0 (XX = 11, 15, 20, 30, 40) SD8 D CSS CCT: 2700K/K/3500K/0K (YY = 27, 30, 35, 40) SD8 D CD Options: Fuse & Fuse Holder/attery Pack/Chicago Plenum/Dali Driver ( * = F, P, CP, DLI) SD8 (XXLM) (YYK) (Z) G5 80CRI ( * ); SD8 D CS Lumen Package: 5000 (XX = 50) SD8 D CSS CCT: 2700K/K/3500K/0K (YY = 27, 30, 35, 40) SD8 D CD Voltage: 120V/277V (Z = 120, 277) Options: Fuse & Fuse Holder/attery Pack/Chicago Plenum/Dali Driver ( * = F, P, CP, DLI) ENERGY STR certified: SD4-FM PRODUCT# FIXTURE CONFIGURTIONS = ENERGY STR SD8 (XXLM) (YYK) MVOLT G5 80CRI ( * ) FM; SD8 D CS FM Lumen Package: 1100/1500///0 (XX = 11, 15, 20, 30, 40) SD8 D CSS FM CCT: 2700K/K/3500K/0K (YY = 27, 30, 35, 40) SD8 D CD FM Options: Fuse & Fuse Holder/attery Pack/Chicago Plenum/Dali Driver ( * = F, P, CP, DLI) SD8 (XXLM) (YYK) (Z) G5 80CRI ( * ) FM; SD8 D CS FM Lumen Package: 5000 (XX = 50) SD8 D CSS FM CCT: 2700K/K/3500K/0K (YY = 27, 30, 35, 40) SD8 D CD FM Voltage: 120V/277V (Z = 120, 277) Options: Fuse & Fuse Holder/attery Pack/Chicago Plenum/Dali Driver ( * = F, P, CP, DLI) 1300 S. Wolf Road Des Plaines, IL 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity rands Lighting, Inc. Rev. 10/06/17 2 of 5

3 2700K, K, 3500K & 0K CCT Catalog Number: SD8 20LM 35K MVOLT; SD8 D CS Test Number: PR Total Lumen Output: 1932 Lumens Efficacy: 79 lm/w (0K), 75 lm/w (3500K) 71 lm/w (K) Spacing Criteria: 0.88 : Clear specular lzak reflector. Open bottom. 2700K, K, 3500K & 0K CCT Catalog Number: SD8 20LM 35K MVOLT; SD8 D CD Test Number: PR Total Lumen Output: 1725 Lumens Efficacy: 70 lm/w (0K), 67 lm/w (3500K) 62 lm/w (K) Spacing Criteria: 0.92 : Clear satin lzak reflector. Open bottom Candlepower (Candelas) Candela Lumens Lumen Multiplier: x K, K, 3500K & 0K CCT Catalog Number: SD8 30LM 35K MVOLT; SD8 D CS Test Number: PR P Total Lumen Output: 2898 Lumens Efficacy: 82 lm/w (0K), 79 lm/w (3500K) 75 lm/w (K) Spacing Criteria: 0.88 : Clear specular lzak reflector. Open bottom Candlepower 6 (Candelas) 5 Candela Lumens Lumen Multiplier: x Candlepower 8 7 (Candelas) Candela Lumens Lumen Multiplier: x x x , VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) Fixtures tested to IES recommended standard for solid state lighting per LM Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field S. Wolf Road Des Plaines, IL 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity rands Lighting, Inc. Rev. 10/06/17 3 of 5

4 2700K, K, 3500K & 0K CCT Catalog Number: SD8 20LM 35K 120 FM; SD8 D CS FM Test Number: PR Total Lumen Output: 1932 Lumens Efficacy: 79 lm/w (0K), 75 lm/w (3500K) 71 lm/w (K) Spacing Criteria: 0.88 : Clear specular lzak reflector. Open bottom. 2700K, K, 3500K & 0K CCT Catalog Number: SD8 20LM 35K 120 FM; SD8 D CD FM Test Number: PR Total Lumen Output: 1725 Lumens Efficacy: 70 lm/w (0K), 67 lm/w (3500K) 62 lm/w (K) Spacing Criteria: 0.92 : Clear satin lzak reflector. Open bottom Candlepower (Candelas) Candela Lumens Lumen Multiplier: x K, K, 3500K & 0K CCT Catalog Number: SD8 30LM 35K 120 FM; SD8 D CS FM Test Number: PR P Total Lumen Output: 2898 Lumens Efficacy: 82 lm/w (0K), 79 lm/w (3500K) 75 lm/w (K) Spacing Criteria: 0.88 : Clear specular lzak reflector. Open bottom Candlepower 6 (Candelas) 5 Candela Lumens Lumen Multiplier: x Candlepower 8 7 (Candelas) Candela Lumens Lumen Multiplier: x x x , VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) VERGE INITIL FOOTCNDLES 5 x x x x x x x x COEFFICIENTS OF UTILIZTION - % (Zonal Cavity Method) Fixtures tested to IES recommended standard for solid state lighting per LM Photometric performance on a single unit represents a baseline of performance for the fixture. Results may vary in the field S. Wolf Road Des Plaines, IL 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity rands Lighting, Inc. Rev. 10/06/17 4 of 5

5 EXMPLE Group Fixture Control* *ppiication diagram applies for fixtures with eldoled drivers only. nps 80 EZ Dimming/Control Pack (qty: 2 required) npodm 2P DX Dual On/Off/Dim Push-utton WallPod ncm DCX Daylight Sensor with utomatic Dimming Control ncm PDT 9 Dual Technology Occupancy Sensor ncm PDT 9 npodm 2P DX Description: This design provides a dual on/off/dim wall station that enables manual control of the fixtures in Row and Row separately. dditionally, a daylight harvesting sensor is provided so the lights in Row can be configured to dim automatically when daylight is available. n occupancy sensor turns off all lights when the space is vacant. C nps 80 EZ C WIRING KEY nps 80 EZ C CT-5e Cable Line Power Low Voltage Dimming Wires ncm DCX OPTIONL Choose Wall Controls nlight offers multiple styles of wall controls - each with varying features and user experience. nlight Controls ccessories: Order as separate catalog number. Visit for complete listing of nlight controls. WallPod Stations Model number Occupancy sensors Model Number Push-utton Wallpod Traditional tactile buttons and LED user feedback Graphic Wallpod Full color touch screen provides a sophisticated look and feel On/Off npodm (Color) Small motion 36, ceiling (PIR/dual Tech) ncm 9 / ncm PDT 9 On/Off & Raise/Lower npod DX (Color) Large motion 36, ceiling (PIR/dual tech) ncm 10 / ncm PDT 10 Graphic Touchscreen npod GFX (Color) Wide View (PIR/dual tech) nwv 16 / nwv PDT 16 Photocell controls Model Number Wall Switch w/ Raise/Lower (PIR/dual tech) nwsx LV DX / nwsx PDT LV DX Dimming ncm DCX Cat-5 cables (plenum rated) Model Number 10', CT5 10FT CT5 10FT J1 15, CT5 15FT CT5 15FT J1 Capable This item is an + capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. ll configurations of this luminaire meet the cuity rand's specification for chromatic consistency. This luminaire is part of an + Certified solution for nlight control networks when ordered with drivers marked by a Shaded background* This is part of an + Certified solution for nlight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background* To learn more about +, visit *See ordering tree for details 1300 S. Wolf Road Des Plaines, IL 18 Phone (847) Fax (847) Visit us at Printed in U.S cuity rands Lighting, Inc. Rev. 10/06/17 5 of 5