621 Recessed LED Downlight - 6

Transcription

1 621 Recessed Downlight - 6-3/4" Description The 621 recessed downlight integrates the best technologies. Multiple beam spreads, finishes, mounting options and lumen packages allow for creative lighting solutions to illuminate architectural spaces. 6-5/8" Ceiling Cut-Out Diameter 15-7/8" New Construction Dimensions 10-5/8" Housing All configurations are of modular construction consisting of integral junction box from 16-gauge galvanized steel, integral driver, quick connect whip and the Module Assembly. The New Construction mounting option provides for ceiling fitting plate installation independent of the Module Assembly, allowing the finish and closing of the ceiling. 27 long steel mounting bars (MB27) are supplied for NC, IC, ICAT, or Chicago Plenum mounting options. Mounting Patented 3-point bayonet latch mounting system consists of die-cast magnesium trim ring and mounting ring with adjustable throat to accommodate up to a 2 ceiling thickness. Mounting ring incorporates integral yoke and box from 16-gauge galvanized steel for easy optical assembly. Listings - ETLus Listed to UL1598, cetl Listed to CSA C22.2 # Type IC with IC, ICAT, or Chicago Plenum box option - Suitable for dry and damp locations, wet location with lens option - Made in the USA - meets the requirements of the Buy American provision within the ARRA - WET LOCATION see LiteOptics pg 3 Ordering Code Follow the steps to specify your fixture, example: XTM19-13LM-35K-98-DA V-IC- Series Aperture Delivered Lumen CRI Reflector Voltage Dimming XTM19 07LM 4 10LM 4 13LM 1,2 20LM 2,5 30LM 5 40LM 1, lm 50LM 1,3,4,5 27K 30K V30K 35K 40K B27K K 3000K 3000K Vibrant 3500K 4000K 2700K Beauty CRI 98 1,2 98 CRI DA20 DA40 DA60 SA20 SA40 SA60 diffuse, 20º diffuse, 40º diffuse, 60º specular, 20º specular, 40º specular, 60º V 277V 10V LUDA 3 LUDH 4 DIM10 5 DIM10Z 5 DALI 5 DALIZ 5 standard 0-10V dimming to 10% Lutron Hi-lume/EcoSystem A-Series -to 1% Lutron EcoSystem H-Series -to 1% eldo 0-10V dimming to 1% eldo 0-10V dimming to zero (0.1%) eldo DALI dimming to 1% eldo DALI dimming to zero (0.1%) Mounting Options LightOptics Options NC IC 1 ICAT 1 CP 1 RET 2 New Construction with ceiling fitting plate, for T-bar or GWB Ceilings Insulation Contact Housing Insulation Contact /Airtight housing Chicago Plenum Housing Retrofit, no ceiling pan clear glass screen - central etched float glass perforated - central etched float glass - corona ring - central soft disk - diffusing screen - etched tapered ring - pupil optic blue - pupil optic perforated - pupil optic white - clear screen glass for wet location - diffusing screen for wet location - trimless appearance - FU XFMR EM Fusing 480V/347V 60Hz transformer Emergency Battery Backup CRI not available for 40LM and 50LM. 2. B27K Beauty Series choose 98 CRI (actual 93). Available for 13LM and 20LM only. 3. LUDA not available for 50LM. 4. LUDH not available for 07LM, 10LM, and 50LM. 5. DIM10, DIM10Z, DALI, DALIZ not available for 40LM and 50LM. Available at 85% Lumen output for 30LM and 20LM (98 CRI). QuikShip options on product webpage for download In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 1 of 5

2 Xicato Series Performance SDCM DUV Life Warranty Standard Series Artist Series 1 x 2 MacAdam Ellipse +/ L80 50,000 hrs 5 year no color shift warranty 5 year fixture warranty Patented Cold Remote Phosphor, Xicato XTM19 Standard Series 2700k, 3000k, 3500k, 4000k 83 typical Patented Cold Remote Phosphor, Xicato XTM19 Artist Series 2700k, 3000k, 3500k, 4000k 98 typical 109 Delivered Lumen / Wattage Chart 4000 lm 5000 lm 3400 lm 9 W 12 W 16 W 25 W 37 W 49 W 56 W 11 W 15 W 42 W Vibrant Series (V80) Patented Cold Remote Phosphor, Xicato XTM19 Vibrant Series (V80) 3000k 83 typical lm 5000 lm 3400 lm 9 W 12 W 16 W 25 W 37 W 49 W 56 W Vibrant Series (V95) Patented Cold Remote Phosphor, Xicato XTM19 Vibrant Series (V95) 3000k 98 typical W 15 W 42 W Beauty Series Patented Cold Remote Phosphor, Xicato XTM19 Beauty Series 2700k 95 typical Values presented are average. Due to installation location and environment, end use performance may vary. Refer to IES file for specific values. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 2 of 5

3 Mounting and Optix Follow the steps to specify your fixture, example: XTM19-13LM - 35K DA V - IC - MOUNTING OPTIONS 6-1/4" NC IC 1 ICAT 1 CP 1 RET 2 New Construction with ceiling fitting plate, for T-bar or GWB Ceilings Insulation Contact Housing Insulation Contact /Airtight housing Chicago Plenum Housing Retrofit, no ceiling pan 8-3/8" 16-3/8" 1. Not available for 40LM or 50LM 2. Plenum Clearance - 8. Adequate plenum clearance is recommended when no above ceiling access is available for the installation or servicing of the driver box 1-3/4" 14-1/8" 12" IC, ICAT, and CP 3" max 7-1/8" max 9" 2-5/8" max DIMMING CONDUIT KNOCK-OUT DRIVER LINE VOLTAGE CONDUIT OPENING RET OPTIX clear glass screen - central etched float glass perforated - central etched float glass - corona ring - central soft disk - diffusing screen - etched tapered ring - pupil optic blue - pupil optic perforated - pupil optic white - clear screen glass for wet location - diffusing screen for wet location - trimless appearance - H: 3/4 H: 3/4 H: 1 H: 1 In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 3 of 5

4 Options FU XFMR EM Fusing 480V/347V 60Hz transformer Emergency Battery Backup Transformer Option 480V / 347V Housing - Fabricated from 16 gauge steel - Finish is gray polyester powder inside and out - Flat, removable covers fastened with plated steel screws - Cover design permits easy removal without extracting cover screws - Mounting holes on back of box - Available with knockouts. Removable concentric knockouts on all four sides Electrical - Input Voltage: 480/347V, 60 Hz, 125VA - Output Voltage: 277V, 60 Hz - Max Input Current Load: 0.26A - Non-isolated Autotransformer - 5 Year Warranty - Industry Leading Listings ETLus Listed to UL (suitable for dry and damp locations) cetl Listed to CSA C22.2 #66 Box: UL 50 Type 1, CSA Certified, Type 1, NEMA/EEMAC Type 1 Wiring 480V RED 347V BLUE 277V BLACK COM WHITE COM WHITE Wiring : - Wye 480V system - Connection red (or blue for 347V) and white wires to any two phase wires. - Delta 480V - Connect to grounded referenced legs only. TOP KO DIMENSIONS ARE IDENTICAL TO BOTTOM KO DIMENSIONS Knockout Pattern A - 1/2 TO 3/4 B - 3/4 TO 1 A B A A B A In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 4 of 5

5 Emergency Battery Back Up Description UL Classified emergency driver that allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the driver switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single can. The driver will operate an array load at 7 watts with constant power. The Constant Power design of the driver maintains the output wattage to the array even as the system voltage diminishes. Specifications Input Voltage... (Universal) VAC, 50/60Hz Input Rating (120/277) Watts (max) Output Voltage VDC Class 2 Compliant Output Current A (@10VDC) A (@60VDC) Output Power... 7 Watts (constant) Emergency Operation minutes Operating Temp... 0 to 55 C Battery... High Temp Nickel-Cadmium 24 Hour Recharge 7-10 Year Life Expectancy Approval... UL and CUL Classified as an emergency driver for field installation 1. Max. output voltage in emergency mode is 58.5 VDC with a + tolerance of 1.5 volts Features - UL Classified for Field Installation - UL 1310 Certified, Output Class 2 Compliant - Long life high temperature recyclable Ni-Cad battery - Galvanized steel case - Includes single-piece TBTS test switch and charge indicator accessory kit - For use with switched or unswitched fixtures - 5-Year Warranty. - Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements - Listed for use in damp locations and in enclosed and gasketed fixtures. Dimensions 13" 1-1/4" 12-5/8" 2-1/4" In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 5 of 5