622 Recessed LED Wallwash - 4

Transcription

1 H CO 25º Ceiling Cut-Out Diameter 622 Recessed Wallwash - 4 Description The 622 recessed wall wash provides energy efficient light through a 4 aperture. An innovative approach for achieving an even wall illumination across the wall up to ceiling line. Our unique design delivers the best performing wall wash fixture on the market eliminating scallops while achieving even light distribution across the wall along the ceiling. The Wila 622 Recessed Wallwash uses a Xicato Module for the best fixture-to-fixture color consistency available on the market of +/- 50 Kelvin. It is within 2 MacAdam ellipse for an INDUSTRY BEST SDCM of 2x1y with a DUV of only.001. Our color hold over time better than any other on the market and carries a 5 YEAR NO COLOR SHIFT WARRANTY. Wall washes are particularly important regarding color maintenance of as it is the most obvious when noticing color shifts or variances. Micro-prism directional optic for even spread illumination on the wall. W Housing All configurations are of modular construction consisting of integral junction box from 16-gauge galvanized steel, integral driver, quick connect whip and the Module Assembly. The New Construction mounting option provides for ceiling fitting plate installation independent of the Module Assembly, allowing the finish and closing of the ceiling. 27 long steel mounting bars (MB27) are supplied for NC, IC, ICAT, or CP mounting options. L New Construction Dimensions Dimensions MS-3 Mounting System Patented 3-point bayonet latch mounting system consists of die-cast magnesium trim ring and mounting ring with adjustable throat to accommodate up to a 2 ceiling thickness. Mounting ring incorporates integral yoke and box from 16-gauge galvanized steel for easy optical assembly. CO 4-3/4 [119mm] H 6-1/2 [165mm] L 11-3/4 [299mm] W 7-7/8 [200mm] Listings - ETLus Listed to UL1598, cetl Listed to CSA C22.2 # Type IC with IC, ICAT, or CP box options. - Suitable for dry and damp locations. Wet location with lens option. - Made in the USA - meets the requirements of the Buy American provision within the ARRA. Ordering Codes Follow the steps to specify your fixture, example: XTM19-13LM - 35K WW V Series Aperture Delivered Lumen CRI Reflector Voltage Dimming XTM19 07LM 10LM 13LM 20LM 30LM 40LM 1 27K 30K V30K 35K 40K B27K K 3000K 3000K Vibrant 3500K 4000K 2700K Beauty CRI CRI WW wall wash V 277V 10V LUDA 3 LUDH DIM10 4 DIM10Z 4 DALI 4 DALIZ 4 standard 0-10V dimming to 10% Lutron Hi-lume/EcoSystem A-Series -to 1% Lutron EcoSystem H-Series -to 1% eldo 0-10V dimming to 1% eldo 0-10V dimming to zero (0.1%) eldo DALI dimming to 1% eldo DALI dimming to zero (0.1%) CRI not available for 40LM. 2. B27K Beauty Series is only associated with 93 CRI and available for 07LM, 10LM and 13LM only. 3. LUDH not available for 07LM and 10LM. 4. DIM10, DIM10Z, DALI, DALIZ not available for 40LM. Available at 85% Lumen output for 30LM and 20LM (98 CRI). QuikShip options on product webpage for download In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 1 of 5

2 Xicato Series Performance SDCM DUV Life Warranty 1 x 2 MacAdam Ellipse +/ L80 50,000 hrs 5 year no color shift warranty 5 year fixture warranty Standard Series Patented Cold Remote Phosphor, Xicato XTM19 Standard Series 2700k, 3000k, 3500k, 4000k 83 typical Delivered Lumen / Wattage Chart 4000 lm 9 W 12 W 16 W 25 W 37 W 49 W Artist Series Patented Cold Remote Phosphor, Xicato XTM19 Artist Series 2700k, 3000k, 3500k, 4000k 98 typical W Vibrant Series (V80) Patented Cold Remote Phosphor, Xicato XTM19 Vibrant Series (V80) 3000k 83 typical lm 9 W 12 W 16 W 25 W 37 W 49 W Vibrant Series (V95) Patented Cold Remote Phosphor, Xicato XTM19 Vibrant Series (V95) 3000k 98 typical W Beauty Series Patented Cold Remote Phosphor, Xicato XTM19 Beauty Series 2700k 95 typical Values presented are average. Due to installation location and environment, end use performance may vary. Refer to IES file for specific values. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 2 of 5

3 2-5/8" max 16-3/8" 8-3/8" 8-3/8" Wila By Ledra Brands Inc. Mounting and LiteOptics Follow the steps to specify your fixture, example: XTM19-13LM - 35K DA V - IC MOUNTING OPTIONS NC IC 1 ICAT 1 CP 1 RET 2 New Construction with ceiling fitting plate, for T-bar or GWB Ceilings IC Housing IC/Airtight housing Chicago Plenum Housing Retrofit, no ceiling pan 6-1/4" 1. Not available for 40LM 2. Plenum Clearance - 8. Adequate plenum clearance is recommendd when no above ceiling access is available for the installation or servicing of the driver box 1-3/4" 14-1/8" 12" IC, ICAT, and CP 3" max DRIVER 7-1/8 9 RET DIMMING CONDUIT KNOCK-OUT LINE VOLTAGE CONDUIT OPENING LITEOPTICS TRP WET trim ring custom paint - 4 wet location - 4 In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 3 of 5

4 Options FU EM XFMR Fusing Emergency Battery Backup 480V/347V 60Hz transformer Transformer Option Housing - Fabricated from 16 gauge steel - Finish is gray polyester powder inside and out - Flat, removable covers fastened with plated steel screws - Cover design permits easy removal without extracting cover screws - Mounting holes on back of box - Available with knockouts. Removable concentric knockouts on all four sides Electrical - Input Voltage: 480/347V, 60 Hz, 125VA - Output Voltage: 277V, 60 Hz - Max Input Current Load: 0.26A - Non-isolated Autotransformer - 5 Year Warranty - Industry Leading Listings ETLus Listed to UL???? (suitable for dry and damp locations???) cetl Listed to CSA C22.2 #???.0 Box: UL 50 Type 1, CSA Certified, Type 1, NEMA/EEMAC Type 1 Wiring 480V RED 347V BLUE 277V BLACK COM WHITE COM WHITE : Wiring : Wye 480V system Connect red (or blue for - 347V) Wye and 480V white system wires to - any Connection two phase wires. red (or blue for 347V) Delta and 480V Connect white wires to to grounded any two referenced phase wires. legs only. - Delta 480V - Connect to grounded referenced legs only. TOP KO DIMENSIONS ARE IDENTICAL TO BOTTOM KO DIMENSIONS Knockout Pattern A - 1/2 TO 3/4 B - 3/4 TO 1 A B A A B A In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 4 of 5

5 Emergency Battery Back Up Description UL Classified emergency driver that allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the driver switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single can. The driver will operate an array load at 7 watts with constant power. The Constant Power design of the driver maintains the output wattage to the array even as the system voltage diminishes. Specifications Input Voltage... (Universal) VAC, 50/60Hz Input Rating (120/277) Watts (max) Output Voltage VDC Class 2 Compliant Output Current A (@10VDC) A (@60VDC) Output Power... 7 Watts (constant) Emergency Operation minutes Operating Temp... 0 to 55 C Battery... High Temp Nickel-Cadmium 24 Hour Recharge 7-10 Year Life Expectancy Approval... UL and CUL Classified as an emergency driver for field installation 1. Max. output voltage in emergency mode is 58.5 VDC with a + tolerance of 1.5 volts Features - UL Classified for Field Installation - UL 1310 Certified, Output Class 2 Compliant - Long life high temperature recyclable Ni-Cad battery - Galvanized steel case - Includes single-piece TBTS test switch and charge indicator accessory kit - For use with switched or unswitched fixtures - 5-Year Warranty. - Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements - Listed for use in damp locations and in enclosed and gasketed fixtures. Dimensions 13.0 x 2.2 x 1.25 (mounting center 12.6 ) MOUNTING CENTER 12.6 In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. v Page 5 of 5