Lokma ve Avadanl klar... Sockets and Accessories kalitenin ad. ... a hallmark of quality

Transcription

1 3 12 Köfleli lokmalarda, yuvarlat lm fl köfleler ile oluflturulan yeni profil sayesinde döndürme kuvveti noktasal de il, yüzeysel aktar l r. Böylece vida ve somuna zarar verilmez. The new profile section in the ring-wrench heads is characterised by its even wave shape. This means that the turning force is applied to the flanks of the bolt heads, not to the corners. The force is distributed more evenly-without distorting the metal Tolerans d fl somun ve vidalarda da kullan labilme özelli i. Also fits bolt heads outside the range of tolerances. Keskin olmayan köflelerden dolay vida ve somuna zarar vermeme özelli i. Does not damage the bolt heads - no distortion of the edges due to force on that surface Daha genifl temas yüzeyi sayesinde daha fazla güç transferi. Greatest transfer of force due to greater contact area. 4 Ar zal vida bafllar nda kullan labilme özelli i. Also suitable for damaged bolt heads. Lokma ve Avadanl klar... Sockets and Accessories kalitenin ad Y llard r, dünya çap ndaki profesyonel el aleti kullan c lar Altafl Lokma Setini tercih ederler. En kaliteli çelik kullan larak, titizlikle dövülen ve ifllenen lokmalar, kullan c lar na hassas ifllerinde uzun servis ömrü ve kullan m kolayl sa lar.... a hallmark of quality For decades, professionals all over the world have been swearing by Altafl socket sets. Blanks forged from glowing-hot steel, careful further processing and a perfect finish ensure the sockets have exceptional precision and service life.

2

3 20 LOKMA ANAHTARLAR El kumandal, ince cidarl, güçlü, 1/4 (6.3 mm) kare adaptörlü. Bilya stoplama oyuklu ve bir taraf na t rt l çekilmifl yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve krom kaplamal. SOCKET WRENCHES Hand driven sockets. Square drive 1/4 (6.3 mm). With ball retaining groove, knurled grip. Chrome-Vanadium steel, polished. Chrome plated. M R 1 DIN 3124 TS ISO 2725/1 20 LOKMA AVADANLIKLAR El kumandal, 1/4 (6.3 mm) kare adaptörlü ve bilya kilitlemeli lokmalar için avadanl k ve aksesuarlar. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve Krom kapl. ACCESSORIES and ATTACHMENTS For hand driven sockets with square drive 1/4 (6.3 mm). With spring loaded locking ball. Chrome-Vanadium steel, chrome plated and polished Z-94 m b DIN 3122 TS ISO 3315 DIN Kod/Code No. " L d1 d2 t / / / / / / / / / / / D 20 M R 3 4 DIN 3124 TS ISO 2725/ Kod/Code No. Mamul Ad Description L / Adaptör 1/4-3/8 Reducer 1/4 to 3/ T-kolu Slid T-handle Uzatma Extention bar Z-94 C rc r kolu Rev. Ratchet, lever change C rc r karesi Coupler Kardan Mafsal Universal joint Kare Tornavida Driving handle EMZ / 20 EMU LOKMA ANAHTAR TAKIMI Krom-Vanadyum çeli inden mamul, 1/4 (6.3 mm) kare adaptörlü, alt köfle lokma anahtar ve avadanl klar. SOCKET SETS Forged, heat treated, squaredrive 1/4 (6.3 mm) hexagon head sockets and accessories. New attractive case and insert, Chrome-Vanadium steel. 203 x 123 x 39 mm Kod/Code No. çindekiler/contentsmul Ad Description Lmm/ EMZ! Z94 + & EMU $ mm ) U m b D D D D D D D U-10 1/4 CIRCIR KOLU DIN 3122, ISO 3315 normlar na uygun. Ayarlanabilir yön mandal sayesinde orta pozisyonda kilitleme. Orta durumda kilitli. Yön mandal sola çevrildi inde saat yönünde, sa a çevrildi inde ise saat yönünün tersinde çal fl r. 1/4 REVERSIBLE RATCHET DIN 3122, ISO With lever change, locking in middle position. Locks in the middle position. When the lever is flipped, it automatically engages for clockwise or counterclockwise operation m b Kod/Code No. " L d1 d2 t / D 20 5/ D 20 11/ D 20 3/ D 20 7/ D 20 1/ D 20 9/ Kod/Code No. a " a A y ä / U-10 1/

4 30 LOKMA ANAHTARLAR El kumandal, ince cidarl, güçlü ve 3/8 (10 mm) kare adaptörlü. Bilya stoplama delikli ve bir taraf na t rt l çekilmifl, yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve Krom kaplamal. SOCKET WRENCHES Hand driven sockets. Square drive 3/8 (10 mm) With ball retaining groove, knurled grip. Chrome-Vanadium steel, polished. Chrome plated. N S 1 DIN 3124 TS ISO 2725/1 30 LOKMA AVADANLIKLARI El kumandal, 3/8 (10 mm) Kare adaptörlü ve bilya kilitlemeli lokmalar için avadanl k ve aksesuarlar. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve Krom kaplamal. ACCESSORIES and ATTACHMENTS For hand driven sockets with square drive 3/8 (10 mm). With spring loaded locking ball. Chrome-Vanadium steel, polished. Chrome plated. n c DIN 3122 TS ISO 3315 DIN D 30 LOKMA ANAHTARLAR El kumandal, ince cidarl, güçlü ve 3/8 (10 mm) kare adaptörlü. Bilya stoplama delikli ve bir taraf na t rt l çekilmifl, yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve Krom kaplamal. SOCKET WRENCHES Hand driven sockets. Square drive 3/8 (10 mm) With ball retaining groove, knurled grip. Chrome-Vanadium steel, polished. Chrome plated. N S 3 DIN 3124 TS ISO 2725/ Z Kod/Code No. Mamul Ad Description L / Adaptör 3/8-1/2 Convertor 3/8-1/ T - Kol Slid T-handle Uzatma Extention bar Uzatma Extention bar Uzatma Extention bar Z-94 C rc r Kolu Rev. Ratc., lever change C rc r Karesi Coupler Kardan Mafsal Universal joint Mafsall T Kol Tommy bar with sliding T U-10 3/8 CIRCIR KOLU DIN 3122, ISO 3315 normlar na uygun. Ayarlanabilir yön mandal sayesinde orta pozisyonda kilitleme. Orta durumda kilitli. Yön mandal sola çevrildi inde saat yönünde, sa a çevrildi inde ise saat yönünün tersinde çal fl r. 3/8 REVERSIBLE RATCHET DIN 3122, ISO With lever change, locking in middle position. Locks in the middle position. When the lever is flipped, it automatically engages for clockwise or counterclockwise operation n c Kod/Code No. a " a A y ä / U-10 3/ , D D D D D D D D D D D D D

5 30 DMZ / 30 DMU LOKMA ANAHTAR TAKIMLARI Krom-Vanadyum çeli inden mamul, alt köfleli ve y ld z köfleli, 3/8 adaptörlü lokma anahtar ve avadanl klar. SOCKET SETS 3/8 drive hot forged, heat treated, hexagon head sockets and accessories. New attractive case and insert. Chrome-Vanadium steel. n c TLG MAFSALLI ve T KOLLU LOKMA TAKIMI 3/8 ve 1/2 ölçülerinde en çok kullan lan lokma ve avadanl klar. Sa lam, dayan kl sac kutular içinde. Krom-Vanadyum çeli inden mamul. SINGLE ENDED RING SPANNER With tommy bar 3/8 and 1/2 Sockets and accessories Chrom-Vanadium steel. n c x 203 x 50 mm 206 x 62 x 40 mm Kod/Code No. çindekiler/contents / DMZ! 3093-Z DMU $ mm U10 & Kod/Code No. çindekiler/contentsmamul TLG 23 M 30/ mm. 19/ mm & % D30 DMZ! 3093-Z D30 DMU $ mm U10 & TX 19 D fi TORX LOKMA ANAHTAR DIN 3120 C 12.5, ISO 1174 normlar na uygun c vatar için, bilya stoplama oyu u. Elle kumandal, krom kaplama, mat. TORX :Camcar Textron Inc. ABD firmas n n tescilli markas d r SOCKET for protruding TORX head screws Square drive as per DIN 3120 C 12.5, ISO 1174, with ball retention groove. Hand-operated, chrome-plated, ground. TORX = reg. trademark of Camcar-Textron Inc. USA O T 9 30 GMZ / 30 GMU LOKMA ANAHTAR TAKIMLARI Krom-Vanadyum çeli inden mamul, alt köfleli ve y ld z köfleli, 3/8 adaptörlü lokma anahtar ve avadanl klar. SOCKET SETS 3/8 drive hot forged, heat treated, hexagon head sockets and accessories. New attractive case and insert. Chrome-Vanadium steel. n c Kod/Code No. 9 + & L d1 d2 t / TX 19 E10 E10 M TX 19 E12 E12 M TX 19 E14 E14 M TX 19 E16 E16 M TX 19 E18 E18 M TX 19 E20 E20 M x 118 x 37 mm Kod/Code No. çindekiler/contents / GMZ! Z94 & GMU $ mm. ( U D30 GMZ! Z D30 GMU $ mm mm. ) U

6 ITX 19 LOKMALI TORX ANAHTAR Özel metodla lokmaya preslenmifl uçlar.1/2 (12.5 mm) adaptörlü. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Lokmalar krom kapl uçlar siyah oksidasyon. TORX = Amerikan Camcar Textron firmas n n tescilli markas d r SCREWDRIVER BIT SOCKETS - TORX With bits securely fixed in socket. Sockets with retaining ball and groove square drive 1/2 (12.5 mm). Bits made from Chrome-Vanadium special steel. Socket chrome plated, bits gun metal. TORX is a registered trademark of Camcar-Textron Inc. USA O T 7 IS 19 TORNAV DA BAfiLI LOKMA O T? ; =. Özel metodla lokmaya preslenmifl uçlar.1/2 (12.5 mm) adaptörlü. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Lokmalar krom kapl, uçlar siyah oksidasyon. SCREWDRIVER BIT SOCKETS With bits securely fixed in socket. Socket with retaining ball and groove square drive 1/2 (12.5 mm). Bits made from Chrome-Vanadium special steel. Sockets chrome plated, bits gun metal finish INX 19 IS 19 IKS 19 INX 19 L Kod/Code No. + & L t / ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T ITX 19 - T Kod/Code Uzun tip/long type ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T ITX 19L - T Kod/Code No. K L L t / ? IS 19 8 x IS x IS x IS x IS x IKS 19 2 PH IKS 19 3 PH - No IKS 19 4 PH - No INX No INX 19 6 M INX M INX M INX M INX 19 L M INX 19 L 8-80 M INX 19 L M INX 19 L M IN 19 ;.. LOKMALI ALTIKÖfiE ANAHTAR SCREWDRIVER BIT SOCKETS O T 5 ITX 19 B LOKMALI TORX ANAHTAR DIN 3120 C 12.5, ISO 1174 normlar na uygun kare adaptörlü ve bilya stoplama deli i, k lavuz delikli torx. Elle kumandal, krom kapl. Lokmaya preslenmifl bits uçlar siyah oksidasyon TORX = Amerikan Camcar Textron firmas n n tescilli markas d r SCREWDRIVER BIT SOCKET for recessed TORX head screws with pilot Square drive as per DIN 3120 C 12.5, ISO 1174, with ball retention groove, internal tamper proof torx. Hand-operated, chrome-plated. With pressed-in pin, gun-metal finish TORX is a registered trademark of Camcar-Textron Inc. USA Kod/Code No. 8 + & L d t / ITX 19B-T20 M4-M ITX 19B-T25 M4.5-M ITX 19B-T27 M4.5-M ITX 19B-T30 M6-M ITX 19B-T40 M7-M ITX 19B-T45 M8-M ITX 19B-T50 M ITX 19B-T55 M ITX 19B-T60 M (*) Standart d fl. not acc. to standarts O T 8 IN 19 L IN 19 Kod/Code No. $ d L t / IN 19 4* IN 19 5* IN 19 6* IN IN IN 19 9* IN IN IN IN 19 17* IN 19 19* Kod/Code Uzun tip/long type $ IN 19 L 5-80* IN 19 L IN 19 L IN 19 L IN 19 L IN 19 L IN 19 L

7 IN 19 PM LOKMALI ALTIKÖfiE ANAHTAR TAKIMI SCREWDRIVER BIT SOCKET SET O T 5 19 LOKMA ANAHTARLAR El kumandal, ince cidarl, güçlü ve 1/2 (12.5 mm) kare adaptörlü, bilya stoplama delikli ve bir taraf na t rt l çekilmifl. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve krom kaplamal. O T 1 DIN 3124 TS ISO 2725/1 SOCKET WRENCHES Hand driven sockets. Square drive 1/2 (12.5 mm). With ball retaining groove, knurled grip. Chrome-Vanadium steel, Polished. Chrome plated. 203 x 123 x 39 mm Kod/Code No. çindekiler/contents $ / IN 19 PM ITX 19 PM LOKMALI TORX ANAHTAR TAKIMI SCREWDRIVER BIT SOCKET SET - TORX 203 x 123 x 39 mm Kod/Code No. çindekiler/contents / ITX 19 PM ITX 19 -T20 - T25 - T27 - T T40- T45 - T50 - T55 - T60 D 19 L LOKMA ANAHTAR - Uzun Tip, UD profil DIN 3124, ISO 2725 standartlar nda. DIN 3120-C 12.5, ISO 1174 normlar nda kare adaptörlü. bilya stoplama delikli ve bir taraf na t rt l çekilmifl el kumandal, krom kapl 16,18 ve 21 ölçülerinde, kol ile kullan m içim Ø 8 mm delik mevcuttur. SOCKET Long pattern, UD profile O T 7 O T 3 DIN 3124, ISO Square drive as per DIN 3120 C 12.5, ISO 1174, with ball retention groove. Hand-operated, chrome-plated, ground. Sizes 16, 18, 21 with Ø 8 mm hole for tommy bar 1999 MAFSALLI T KOL LOKMA Özel Alaflım Çelik. Krom Kaplı T HANDLE WRENCH WITH UNIVERSAL JOINT Special steel. Chorom plated D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L D 19 L Kod/Code No.! " y / / / / / / /

8 D 19 LOKMA ANAHTARLAR El kumandal, ince cidarl, güçlü ve 1/2 (12.5 mm) kare adaptörlü, bilya stoplama delikli ve bir taraf na t rt l çekilmifl. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve krom kaplamal. SOCKET WRENCHES Hand driven sockets. Square drive 1/2 (12.5 mm). With ball retaining groove, knurled grip. Chrome-Vanadium steel, Polished. Chrome plated o d DIN 3124 TS ISO 2725/1 LOKMA AVADANLIKLARI El kumandal, 1/2 (12.5 mm) kare adaptörlü ve bilya kilitlemeli lokmalar için avadanl k ve aksesuarlar. Yüksek kaliteli Krom-Vanadyum çeli inden mamul. Polisajl ve krom kaplamal. DIN 3122 TS ISO 3315 DIN 3123 ACCESSORIES and ATTACHMENTS For hand driven sockets with square drive 1/2 (12.5 mm). With spring loaded locking ball. Chrome-Vanadium steel, chrome plated and polished D D D D D D D D D D D D D D D D D D D D D D D D Kod/Code No. " L d1 d2 t / D 19 3/ D 19 13/ D 19 7/ D 19 1/ D 19 9/ D 19 19/ D 19 5/ D 19 11/ D 19 3/ D 19 25/ D 19 13/ D 19 7/ D 19 15/ D D / D / D / D / / Z Z - 94 A Kod/Code No. Mamul Ad Description Lmm / Adaptör 1/2-3/8 Reducer 1/2 to 3/ Adaptör 1/2-3/4 Convertor 1/2 to 3/ F rdöndü kolu Speed brace T - kolu SlidingT - handle /2 Uzatma Extention bar Uzatma Extention bar Uzatma Extention bar Uzatma Extention bar Uzatma Extention bar C rc r karesi Coupler Kardan mafsal Universal joint Mafsall kol Swivel handle Mafsall kol Swivel handle Z - 94 C rc r kolu Ratchet handle with coupler 1/ Mafsall T kol Tommy bar with sliding T L kol Sliding L handle

9 1993 U-10 1/2 CIRCIR KOLU DIN 3122, ISO 3315 normlar na uygun. Ayarlanabilir yön mandal sayesinde orta pozisyonda kilitleme. Orta durumda kilitli. Yön mandal çevrildi inde otomatik olarak saat yönünde veya saat yönünün tersinde çal fl r. 1/2 REVERSIBLE RATCHET DIN 3122, ISO With lever change locking in middle position. Locks in the middle position. When the lever is flipped, it automatically engages for clock wise or counterclockwise operation o d 19 QMZ / 19 QMU LOKMA ANAHTAR TAKIMLARI Alt köfleli ve y ld z köfleli serilerin çok kullan lan anahtarlar ve avadanl klar. Sa lam, darbelere dayan kl sac kutular içinde. SOCKET SETS With hexagon or bi-hexagon sockets with accessories in sturdy, stove enamelled steel carrying case. o d Kod/Code No. a " a A y ä / U-10 1/ , TMZ / 19 TMU LOKMA ANAHTAR TAKIMLARI Alt köfleli ve y ld z köfleli serilerin çok kullan lan lokma anahtarlar ve avadanl klar. Sa lam, darbelere dayan kl sac kutular içinde. SOCKET SETS With hexagon or bi-hexagon sockets with accessories in sturdy, stove enamelled steel carrying case. 525 x 203 x 50 mm Kod/Code No. çindekiler/contents TMZ! / TMU $ mm & D 19 TMZ! D 19 TMU $ mm. D 19 TAZ! D 19 TAU $ 3/8 13/32 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8 15/ /16 1.1/8 1.3/16 1.1/4 A.F o d ( 1995 ) x 180 x 48 mm Kod/Code No. çindekiler/contents QMZ! QMU $ mm V 19 / VBD 19 D 19 QMZ! D 19 QMU $ D 19 QAZ! D 19 QAU $ mm. 3/8 7/16 1/2 9/16 4 5/8 11/16 3/4 13/16 7/8 15/ /16 1.1/4 A.F LOKMA TEfiH R SET Teflhir için dizayn edilmifl, sat flta kolayl k sa layan, kaliteli sacdan mamul, elektrostatik toz boya ile kapl DISPLAY BOX For 1/2 drive sockets. Best selling sizes, all easily accesable. Modern attractive shape, made of sheet metal, electrostatic powder coated ) 1995 ( O T KMZ / 19 KMU LOKMA ANAHTAR TAKIMLARI Alt köfleli ve y ld z köfleli serilerin çok kullan lan lokma anahtarlar ve avadanl klar. Sa lam, darbelere dayan kl sac kutular içinde. SOCKET SETS With hexagon or bi-hexagon sockets with accessories in sturdy, stove enamelled steel carrying case. o d x 300 x 220 mm Kod/Code No. çindekiler/contents VB adet / pieces mm adet / pieces mm. 6 adet / pieces mm VBD adet / pieces mm adet / pieces mm. 6 adet / pieces mm. 281 x 79 x 48 mm Kod/Code No. çindekiler/contents KMZ! KMU $ mm. & D 19 KMZ! D 19 KMU $ mm. & D 19 KAZ! D 19 KAU $ 4 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 AF. & (*) Siparifl üzerine üretilmektedir. Manufactured due to special orders

10 32 LOKMA ANAHTARLAR El kumandal lokmalar, ince cidarl, güçlü, TS 2725/1 DIN 3120, ISO 1174'e uygun 3/4 (19 mm) kare adaptörlü. Bilya stoplama oyuklu yüksek kaliteli Krom-Vanadyum çeli inden mamul. Krom kapl ve polisajl. P U 1 DIN 3124 TS ISO 2725/1 D 32 LOKMA ANAHTARLAR El kumandal lokmalar, ince cidarl, güçlü, DIN 3120, ISO 1174'e uygun 3/4 (19 mm) kare adaptörlü. Bilya stoplama yüksek kaliteli Krom-Vanadyum çeli inden mamul. Krom kapl ve polisajl. P U 4 SOCKET WRENCHES Hand operated sockets, thin walled, extra strong, square drive 3/4 (19 mm) in accordance with TS 2725/1 DIN 3120, ISO 1174 and with retaining groove. High quality Chrome-Vanadium steel. Chrome plated and polished. SOCKET WRENCHES Hand operated sockets, thin walled, extra strong, square drive 3/4 (19 mm) in accordance with DIN 3120, ISO 1174 and with retaining groove. High quality Chrome-Vanadium steel. Chrome plated and polished * * * * * * Kod/Code No. " L d1 d2 t / D 32 7/ D 32 15/ D D / D / D / D / D / D / D / D / D / D / D / D / D LOKMA AVADANLIKLARI El kumandal lokmalar için, DIN 3120, ISO 1174'e uygun 3/4 (19 mm) kare adaptörlü ve bilya kilitlemeli. Yüksek kaliteli Krom-Vanadyum çeli inden mamul, krom kaplamal ve polisajl. ACCESSORIES and ATTACHMENTS For hand operated sockets and sets with 3/4 (19 mm) square drive in accordance with DIN 3120, ISO 1174 and with retaining ball lock. High quality Chrome-Vanadium steel, chrome plated, polished. p e DIN 3123 DIN 3122 TS ISO LOKMA ANAHTAR TAKIMLARI Çok kullan lan lokmalar ve avadanl klar. Sa lam, darbelere dayan kl sac kutular içinde. P U SOCKET SETS With sockets and accessories. All in fitted inserts in orange steel carrying case, stove enamelled Z x 200 x 70 mm Kod/Code No. çindekiler/contents / EMZ! & mm FMZ! mm. D 32 EAZ! 4 15/16 1.1/16 1.1/8 1.1/4 1.5/16 1.3/8 1.1/2 1.5/8 1.7/8 2 AF. ( Kod/Code No. Mamul Ad Description Lmm / Adaptör 3/4-1/2 Reducer 3/4 to 1/ T - kolu Sliding T - handle K sa uzatma Extention bar Uzun uzatma Extention bar U-2 C rc r kolu Ratchet handle with coupler Z-94 C rc r kolu Ratchet handle with coupler C rc r karesi Coupler Kardan mafsal Universal joint

11 K 19 LAJ/03 ALAfiIMLI JANTLAR Ç N LOKMA SET SOCKET SET for ALLOY WHEELS O T 1 K 19 DARBEL LOKMA ANAHTARLAR DIN 3121 normuna uygun, elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl, 1/2 kare adaptörlü hassas toleransl ve darbelere dayan kl. O T 1 DIN 3129 TS ISO 2725/2 IMPACT SOCKETS For use with, electric end pneumatic tools 1/2 square drive in accordance with DIN 3121 precise tolerances. * Sadece Aluminyum Jantlarda Kullanınız! Kod/Code No. 1y Ly / K 19 LAJ/ K 19 XLAJ/03 ALAfiIMLI JANTLAR Ç N LOKMA SET - Uzun Tip SOCKET SET for ALLOY WHEELS - Long Type * Sadece Aluminyum Jantlarda Kullanınız! Kod/Code No. 1y Ly / K 19 XLAJ/ O T K K K K K K K K K K K K K K K K K K K K K K (*) Siparifl üzerine üretilmektedir. Manufactured due to special orders

12 KB 19 ITX K19 DARBEL LOKMA AVADANLIKLARI DIN 3121, ISO 1174 normlar na uygun elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl, 1/2 (12.5 mm) kare adaptörlü hassas toleransl ve darbelere dayan kl, uzun ömürlü, ekstra sert ACCESSORIES & ATTACHMENTS For use with, electric and pneumatic tools 1/2 (12.5 mm)square drive in accordance with DIN 3121, ISO 1174 extra hard for longer life. o d DARBEL LOKMALI TORX ANAHTAR Kare adaptörlü, Form H TORX = Amerikan Camcar Textron firmas n n tescilli markas d r SCREWDRIVER BIT SOCKET for recessed TORX head screws Square drive, Form H TORX is a registered trademark of Camcar-Textron Inc. USA O T 7 KB KB Kod/Code No. + $ y / ITX K 19 T30 M6-M ITX K 19 T40 M7-M ITX K 19 T50 M ITX K 19 T55 M ITX K 19 T60 M K 19 LD DARBEL LOKMA UZUN T P Binek Araçlar çin Haval veya elektrikli el aletleri ile çal flan, DIN 3121 G 12.5 ISO 1174 normlar na uygun kare adaptörlü. Yar fl arabalar n n jantlar için, somunlar n zarar görmesini önleyen plastik z rhl, al fl ml jantlar koruyan ince cidarl tasar m O T 1 IMPACT SOCKET for cars KB 1932 KB 1930 KB 1995 Power-operated. Square drive as per DIN 3121 G 12.5, ISO 1174 For racing wheels, with a plastic insert to protect the wheel nuts Thin-walled to protect the alloy wheels Kod/Code No. Mamul Ad Description Lmm / KB 1930 Adaptör 1/2-3/8 Reducer 1/2 to 3/ KB 1932 Adaptör 1/2-3/4 Convertor 1/2 to 3/ KB 1995 Kardan Mafsal Unviversal Joint KB Uzatma Extention bar KB Uzatma Extention bar DARBEL LOKMA için O-R NG ve P MLER LOCKING RINGS and PINS for IMPACT SOCKETS KB 1970 KB 1975 Kod/Code No. Ød L ØD! / KB o-ring KB o-ring KB pim / pins KB pim / pins Kod/Code No.! y C / K 19 LD K 19 LD K 19 L DARBEL LOKMA ANAHTARLAR - Uzun Tip El kumandal elektrikle ve haval el aletlerinde kullan lmak üzere tasarlanm fl, hassas toleransl ve darbelere dayan kl, DIN 3121 G 12.5 ISO 1174 normlar na uygun kare adaptörlü. IMPACT SOCKET WRENCHES - Long Type Power-operated, suitable for all standard electric and air tools. Square drive as per DIN 3121 G12.5, ISO 1174 O T 1 DIN 3121 ISO 1174 K19PM DARBEL LOKMA ANAHTAR TAKIMI IMPACT SOCKET SET o d 1 Kod/Code No.! y C / K19 L K19 L KB 3019 DARBEL LOKMA AVADANLI I DIN 3121, ISO 1174 normlar na uygun, elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl, 3/4 kare adaptörlü hassas toleransl ve darbelere dayan kl, uzun ömürlü ekstra sert ACCESSORIES & ATTACHMENTS For use with, electric and pneumatic tools 3/4 square drive in accordance with DIN 3121 ISO 1174 extra hard for longer life. n c 273 x 73 x 46 mm Kod/Code No. çindekiler/contents K19PM 1 8 adet / pieces Kod/Code No. Mamul Ad Description Lmm / KB 3019 Adaptör 3/8-1/2 Convertor 3/8 to 1/

13 K 32 DARBEL LOKMA ANAHTARLAR DIN 3121, ISO 1174 normlar na uygun elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl, hassas toleransl ve darbelere dayan kl, uzun ömürlü ekstra sert P U 1 DIN 3129 TS ISO 2725/2 KB 32 DARBEL LOKMA AVADANLIKLARI DIN 3121, ISO 1174 normlar na uygun elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl, 3/4 kare adaptörlü hassas toleransl ve darbelere dayan kl, uzun ömürlü ekstra sert p e DIN 3121 ISO 1174 IMPACT SOCKETS For use with, electric or pneumatic 3/4 square drive in accordance with DIN 3121 ISO 1174 extra hard for longer life. ACCESSORIES & ATTACHMENTS For use with, electric and pneumatic tools 3/4 square drive in accordance with DIN 3121 ISO 1174 extra hard for longer life. KB 3221 KB K K K K K K K K K K K K K K K K Kod/Code No. Mamul Ad Description Lmm / KB 3219 Adaptör 3/4-1/2 Reducer 3/4 to 1/ KB 3221 Adaptör 3/4-1 Convertor 3/4 to DARBEL LOKMA için O-R NG ve P MLER LOCKING RINGS and PINS for IMPACT SOCKETS KB 3270 KB 3275 Kod/Code No. Ød L ØD! / KB o-ring KB o-ring KB pim / pins KB pim / pins (*) Siparifl üzerine üretilmektedir. Manufactured due to special orders

14 K 21 K 21 L DARBEL LOKMA ANAHTARLAR DIN 3121, ISO 1174 normlar na uygun elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl 1 kare adaptörlü, emniyet pimli hassas toleransl ve darbelere dayan kl. IMPACT SOCKETS For use with power tools, electric or pneumatic tools 1 square drive, with locking pin, in accordance with DIN 3121, ISO 1174 precise tolerances. R V 1 DIN 3129 TS ISO 2725/2 DARBEL LOKMA ANAHTARLAR - Uzun Tip DIN 3121, ISO 1174 normlar na uygun elektrikli ve haval el aletlerinde kullan lmak üzere tasarlanm fl 1 kare adaptörlü, emniyet pimli hassas toleransl ve darbelere dayan kl, uzun ömürlü, ekstra sert IMPACT SOCKETS - Long Pattern For use with power tools, electric or pneumatic 1 square drive in accordance with DIN 3121, ISO 1174 extra hard for longer life. R V K 21 19* K 21 20* K 21 21* K K K K 21 28* K K K K K K K K K K K K K K K K 21 80* Kod/Code No. % L d1 d2 t / K 21 3/ K 21 7/ K 21 15/ K K / K / K / K / K / K / K / K / K / K / K 21L K 21L K 21L K 21L K 21L K 21L K 21L K 21L K 21L K 21L KB 21 DARBEL LOKMA AVADANLIKLARI IMPACT SOCKETS ACCESSORIES & ATTACHMENTS KB KB KB Kod/Code No. Mamul Ad Description Lmm / KB 2132 Adaptör 1-3/4 Convertor 1 to 3/ KB 2137 Adaptör 1-1.1/2 Convertor 1 to 1.1/ KB Uzatma Extention bar KB Uzatma Extention bar KB Uzatma Extention bar DARBEL LOKMA için O-R NG ve P MLER LOCKING RINGS and PINS for IMPACT SOCKETS p f DIN 3121 TS ISO 1174/2 KB 2132 KB 2137 KB 2175 KB 2170 Kod/Code No. ød L ød! / KB o-ring KB o-ring KB pim KB pim (*) Siparifl üzerine üretilmektedir. Manufactured due to special orders 49