IMRAK Wall-mounted Enclosure Supplied as Kit.

Transcription

1 IMRAK Wall-mounted Enclosure Supplied as Kit

2 2 IMRAK 310 Overview Material specification Top cover: 1.0 mm steel Bottom cover: 1.0 mm steel Cable entry plates: 1.0 mm steel Side panels: 1.0 mm steel Rear panel: 1.0 mm steel Glass door: 1.0 mm steel, 4.0 mm toughened, tinted, glass Metal door: 1.0 mm steel Frame C : 2.0 mm steel 19 panel mounts - ETSI: 2.0 mm steel IMRAK 310 load capacity: 40 Kg Contents Introduction 3 Technical specifications 4 Configurations 5 Accessories 6 Standards IEC 60297: DIN 41494: EN 60950: VDE 0100: Dimensions of mechanical structures of the mm (19 ) series Basic specification for the 19 construction systems European safety standard for information technology equipment Installation and Set up of current systems and earthing DIN : Glass in building; glass edges Colour specification Standard RAL 7016 All components Dimensions Wall mount version Depth: mm Width: 600 mm 7U 12U 17U

3 IMRAK 310 Introduction 3 Introduction to IMRAK 310 The IMRAK 310 wall-mounted cabling enclosure complements the larger floor-mounted IMRAK cabinet and shares the same purpose: to provide total all around cable access and to protect data cables and patch cords. Removable side, top and bottom panels provide 360 access for easy cable installation. Cables can be laid, not pulled through. Top and base gland plates provide supplementary cable access. In addition, there is a full range of IMRAK cable management accessories designed to help cables flow over a smooth surface, thus preventing cable damage. IMRAK 310 is equipped with standard front panel mounts, which can accommodate either 19, ETSI or metric mounting equipments, making it a very flexible enclosure that can evolve with changing requirements. Vented panels provide adequate standard ventilation. There are also pre-punched fan patterns in the top and in the base equipped with a grill cover to provide further ventilation options. IMRAK 310 is supplied flat-packed for easy transport, minimal sto rage space and safe piece by piece installation. One person can easily assemble it in less than 10 minutes. Additional IMRAK 310 enclosures can be added without the need of additional kits, allowing simple and neat cross patching behind the doors. IMRAK 310 is also available with an optional swing frame, which can be installed remotely from the wallmount en closure. It is easy to remove and to refit and can rotate 90. IMRAK Standard version Key Features: 3 height options: 7U, 12U and 17U 2 depth options : 400 mm and 500 mm Load capacity: 40 Kg 360 optimised cable access Frontal to frontal connection 19, ETSI or metric panel mounting Glass or metal front door with reversible opening and keylock Flat-packed and easy to install Optional swing frame (can be retro-fitted) Vast selection of specific application accessories IMRAK Internal frame Example of IMRAK 310 bayed together

4 4 IMRAK 310 Technical specifications D 573 mm C 403 mm / 503 mm Front Side A B 7U = 371 mm 12U = 593 mm 17U = 816 mm Top A = Height (mm) B = Height unit C = Depth (mm) D = Width (mm) 371 7U 403 / U 403 / U 403 /

5 IMRAK 310 Primary plus cabinet 5 Contents of kit - Primary Plus cabinet build IMRAK 310 Primary cabinet built with glass door Qty Finish Top cover 1 Anthracite RAL 7016 Bottom cover 1 Anthracite RAL 7016 Cable passage entry 2 Anthracite RAL 7016 Side panels 2 Anthracite RAL 7016 Rear panel 1 Anthracite RAL 7016 Glass door 1 Anthracite RAL 7016 C frame 2 Black RAL ETSI panel mounts 2 Black RAL 9005 Fixings Contents of kit 20 x 8 x screw kit schaube panel mounts IMRAK 310 Primary cabinet Qty Finish built with glass door Top cover 1 Anthracite RAL 7016 Bottom cover 1 Anthracite RAL 7016 Cable passage entry 2 Anthracite RAL 7016 Side panels 2 Anthracite RAL 7016 Rear panel 1 Anthracite RAL 7016 Metal door 1 Anthracite RAL 7016 C frame 2 Black RAL ETSI panel mounts 2 Black RAL 9005 Fixings top bottom sides C Frame 1 x rear Ordering information IMRAK 310 Primary cabinet built with glass door H(U) x W x D Net weight for kit (Kg) Anthracite RAL U 600x400 mm 15 Kg VT U 600x500 mm 17 Kg VT U 600x400 mm 18.5 Kg VT U 600x500 mm 20.5 Kg VT U 600x400 mm 26 Kg VT U 600x500 mm 28 Kg VT x door gland IMRAK 310 Primary cabinet built with steel door H(U) x W x D Net weight for kit (Kg) Anthracite RAL U 600x400 mm 15 Kg VT U 600x500 mm 17 Kg VT U 600x400 mm 18.5 Kg VT U 600x500 mm 20.5 Kg VT U 600x400 mm 26 Kg VT U 600x500 mm 28 Kg VT

6 6 IMRAK 310 Accessories Thermal kit Thermal kit VK Sliding shelves kit 255 mm deep sliding shelves kit VK mm deep sliding shelves kit VK cantilever sliding keyboard shelves kit VK Earth continuity kit Thermal kit Earth continuity kit VK Single and double cable hoops kit Double cable metal hoops kit 10 pcs. Single cable metal hoops kit 10 pcs. Single cable plastic hoops kit 10 pcs. VK VK VK Sliding shelves kit Cable support kit with hooks Earth continuity kit

7 IMRAK 310 Accessories 7 Cable management panels kit 1U 19 cable management panel w/metal hoops 1U 19 cable management panel w/plastic hops VK VK Caged nuts and fixings M6 caged nuts kit 50 pcs. M6 x 12 mm pozi-drive screws and cup washers kit 50 pcs. VK VK Network Power Manager Steel Network Power Manager 1U - 19 rackmount PDU 4 sockets multistandard w/illuminated switch PDU 4 sockets multistandard w/mgt PDU 4 sockets multistandard no protection PDU 6 sockets multistandard w/illuminated switch PDU 6 sockets multistandard w/mgt PDU 6 sockets multistandard no protection Available with up to 9 sockets. K04MET-IL2S K04MET-MT2S K04MET-SI2S K06MET-IL2S K06MET-MT2S K06MET-SI2S Cable management panels kit Plastic Fireproof Network Power Manager 1.5U - 19 rackmount PDU 5 multistandard socket w/mgt C5NER-MSTDB PDU 5 UK sockets w/illuminated switch, 13A BS1363 Plug CL05-UKIL13ABS PDU 6 multistandard socket w/illuminated switch C6NER-MSTVI PDU 6 UK sockets w/mgt, 13A BS1363 Plug CL06-UKMT13ABS Caged nuts and fixings Power Distribution Units are CE marked - conforms to CEI EN regulation Network Power Management

8 APW Electronics S.r.l San Mauro Torinese - Torino - Italy Corso Lombardia, 52 Tel Fax vendite@apw.eu.com All trademarks are the property of their respective owners APW 2014 Publication MKA-CTG-EN 0114 Designed and produced by GOMA Elettronica SpA Distributed by: