Ordering Information / Index

Transcription

1 Toll Free Express Ordering: Customers may place express orders by calling (from continental U.S.) from 8 a.m. - 5 p.m. eastern time, Monday through Friday. Ordering Information: Our catalog has been designed to make ordering as easy as possible. It is not possible to list all of the items available through Blaine. If you need items, that do not appear in our catalog, please send a sample to our Research Department at Blaine Drive, Hagerstown, Md To help expedite your orders, please use our part numbers, quantities required and include your account number, if possible, on your purchase orders. Delivery Status: Any delivery dates set forth by Blaine WIndow are estimates only and are not intended as a guarantee of date of delivery. Our pledge is for quick and efficient processing of your order. However, due to the nature of our business, stock shortages may occur from time to time. Items will remain on back-order until shipped. Blaine Window Hardware will not be liable for any delay in delivery or failure to deliver any or all of the goods in case such delay results from causes beyond our control. Order status may be obtained by calling our office at Credit Policy: Terms are net 30 days for open account customers. All other orders must be pre-paid or shipped C.O.D. unless otherwise specified. Partial payment in advance may be required with an order. We accept all major credit cards. C.O.D.: Orders may be shipped on a Cash on Delivery (C.O.D.) basis. Our Accounting Department may require cash, cashiers check, certified check or money order for payment. The current U.P.S. C.O.D. charge is $9.00 per carton. The refusal of a C.O.D. shipment, for any reason other than apparent damage may cause your account to be coded cash in advance only. Special Orders: Non stock parts (special orders) may require a minimum order quantity. Accessories... Accurate Parts... Alcove Clips & End Plugs... All American Parts... American Sanitary Parts... AMPCO... Bobrick Parts... Cams, Pintles & Hinge Pins... Color Charts... Columbia Parts... Compartments Construction... Plastic Laminate, Solid Plastic, Steel Powder Coat Comres Manufacturing... Comtec Hardware... Concealed Latches & Knobs... Door Hardware... Inswing & Outswing Top & Bottom Hinges Door Inserts... Door Pull Fix ItKits... Door Stops... Door Packs, Surface Mounted... Entry & Urinal Screens Size Information... Fasteners... Fiat... Flush Metal Hardware... General Partition... If you don t see the parts you need on the following pages, please SEND A SAMPLE for identification! Ordering Information Damages / Shortages: All material, in transit, is the property of the buyer and buyer assumes all responsibility for filing claims and damages. Please inspect all freight for visible damage prior to accepting. Do not accept cartons which show damage or are open. Claims for concealed damage must be made by the buyer, with the carrier, within ten (10) working days. Original shipping carton must be retained. Shortages must be reported to us at within ten (10) working days. Terms & Conditions INDEX Ordering Information / Index Returns: All returns / exchanges must be made within 30 days from receipt of material. Authorization numbers are available by calling us at All authorization numbers must appear on the outside of the carton and merchandise must be shipped prepaid to our warehouse.shipping charges will not be credited on returns unless authorized in writing by Customer Service. Any unauthorized returns will be refused. A restocking fee of 25% will be charged for returns when the customer ordered incorrectly. We strongly urge you to send a sample to eliminate doubt when placing orders. Special order or custom made parts are not returnable unless defective. Stock Parts : For orders less than $25.00, there will be a $5.00 processing fee. Freight: All shipments will be made by the carrier of our choice, usually U.P.S. or Post Office., unless specified otherwise. We also offer UPS Next Day and Second Day service when requested. The customer is responsible for all shipping charges unless otherwise specified. Common carrier service is also available. A $8.50 minimum shipping and handling charge is applied to each order. Actual shipping charges will be added when minimum is exceeded. State Sales Tax: Customers exempt from state sales tax must provide a certificate of exemption with initial order. Samples: Can be sent to our Research Department or photos to: blainehdw@aol.com Global Steel Hardware... Grab Bars... Hadrian Hardware... Headrail Brackets... Hooks & Latches... Knickerbocker Hardware... Metpar Hardware... Mills Hardware... New Items... Pilaster Post Anchoring Packs... Pilaster Shoes & Anchoring Devices... Pre-packaged Hardware... Alcove, Angle, Headrail & Urinal Brackets Panel & Pilaster Packs Quick Fix & latch Repair Kits... Santana Hardware... Sanymetal Hardware... Shanahan Hardware... Screw Packs & Fasteners... Strikes & Keepers... Surface Mounted Hinges... Toilet Partition Size Information... Toilet Partition Layouts... Wall Brackets... Wrap Around Gravity Pivot Hinges J9-2 Toll Free: Fax: blainehdw@aol.com

2 Construction Styles of Toilet Compartments HEADRAIL BRACED (Most Popular) For easy, economical installations, the headrail braced is a great choice. This unit requires no special floor construction; therefore, it can be used in new or old buildings. FLOOR TO CEILING Floor to ceiling is recommended for all areas subject to heavy usage. For problem areas we recommend the use of full length aluminum brackets and hinges. CEILING HUNG Ceiling hung partitions combine functional styling with an unobstructed floor area which simplifies cleaning and reduces the cost of maintenance. FLOOR SUPPORTED Floor supported partitions have the same functional lines as ceiling hung partitions without the top structure. Solid Plastic Toilet Compartments Comtec s solid plastic compartments come closer to being totally maintenance free than any other toilet compartments on the market today. Comtec is a seamless, one piece, solid homogenous polymer resin sheet produced under heat and high pressure. The compartment panels, doors and pilasters are manufactured to handle the toughest reqauirements and meet construction needs. The texture gloss finish is an ideal material for applications from toilet compartment systems to dressing room compartments with an emphasis on the needs of the handicapped. Comtec is exceptionally resistant to marking by pens, cosmetics, pencils, most markers and paints... easily cleaned using a nonabrasive Industrial-Strength detergent. Comtec sheets and compartments are available to meet a wide range of applications including vanity tops, benches and other related products. Comtec products and systems are designed to hold-up under the toughest of conditions and environments with little or NO maintenance. The products and materials are designed and engineered to withstand the most rigorous use and will maintain the Same Quality Appearance as the day they were installed. GRAFFITI RESISTANT Applications - Ideal for wet, corrosive areas that receive high use including schools, parks, gas stations, amusement areas, swimming pools and factories. ASTME 84 TESTED CLASS MATERIAL AVAILABLE COST EFFECTIVE Comtec compartments are a cost effective solution for public restroom construction and replacement... saving maintenance dollars. LOW MAINTENANCE I N D U S T R I E S Comtec compartments are designed to be a low maintenance system and provide an attractive design feature to building maintenance engineers. The protective finish of Comtec is self lubricating and resists ink, pencil, cosmetics and most other instruments. In most instances, stains and marks can be easily removed with a common industrial cleaner. The color of the compartment is homogeneously compounded throughout the material. (Paint will not adhere to the surface of Comtec). Excessive moisture, corrosion from steam cleaning or pressure hose methods of maintenance will not harm Comtec. COMTEC / CAPITOL GUARANTEE Comtec/Capitol guarantees its panels against breakage, corrosion and delamination for 15 years from the date of receipt by the customer (Labor not included in Comtec Warranty) Toll Free: Fax: blainehdw@aol.com J9-3

3 Plastic Laminate Toilet Compartments Plastic laminate products provide the best solution when durability and beauty are required. They provide architects and designers unlimited color and pattern selection, combined with graffiti resistance, ease of maintenance and durability. Sunlight (quick ship series) Available in four construction styles - headrail braced, ceiling hung, floor to ceiling and floor supported. Color to be selected from manufacturer s stand charts for this product. Quick ship series compartments are ideal for projects requiring immediate shipment. Customers doing renovations, tenant work and fast tract projects can rely on a complete inventory of items and the most dependable delivery in the industry. We offer 3 neutral colors to complement any restroom design. Panels and doors have a thickness of 7/8 and pilasters are 1-1/4 thick. Standard hardware is chrome plated institutional quality. Stainless steel hardware, chrome plated brass and continuous hardware are available as an extra cost option (selection of optional hardware may increase delivery times). Unlike may companies, the quick shipment of this series compartment is offered at no extra cost, and this product is also priced economically, making it a great value. Sunburst (special order series) Available in four construction styles - headrail braced, ceiling hung, floor to ceiling and floor supported. Color to be selected from manufacturer s stand charts for this product. Special order series compartments set the architectural standard by offering unlimited color flexibility combined with the finest quality product line. Special order series compartments are the ideal solution for all types of public facilities. Several hundred colors and patterns are available enabling architects and designers the ability to use durable plastic laminates without compromising color designs. Panels and doors are a full 1 inch thick and pilasters are 1-1/4 thick. Standard hardware is chrome plated institutional quality. Stainless steel hardware, chrome plated brass hardware, and continuous hardware are available at extra cost. Our lead times for this product line are the quickest in the industry. Over the years we have proven our ability to produce special orders quickly without unnecessary up charges. Better service, enhanced color selection and quick delivery do not translate to extended lead times and higher costs with this series. Eclipse (phenolic core compartments) Available in four construction styles - headrail braced, ceiling hung, floor to ceiling and floor supported. Color to be selected from manufacturer s stand charts for this product. Phenolic material is a solid plastic material made of laminate color sheets thermally fused to a phenolic core. The color sheets are fused under heat and pressure to the core to form a solid sheet. Solid core products are ideal for areas that require extreme durability. Virtually unbreakable and waterproof, they can be used in wet areas or areas that require hose down cleaning. Abusive areas can rely on the strength of the core to eliminate breakage. Unlike other solid plastic materials, color selection is unlimited. The same range of colors and patterns are available for phenolic that are available for any plastic laminate. With unlimited color selection, architects and designers can achieve the color coordination in their designs without sacrificing the desirable properties of a solid plastic. Doors and pilasters are 3/4 thick and panels are 1/2 thick. Standard hardware is stainless steel. Continuous stainless and continuous aluminum brackets and hinges are available as an extra cost option. J9-4 Toll Free: Fax: blainehdw@aol.com

4 Steel Powder Coated Toilet Compartments FEATURES 1. All partitions have welded construction on perimeters and corners. 2. For protection against rust, all steel is galvanized and bonderized with zinc coating. 3. All hardware is heavy Zamac castings, chrome plated. Brass available at extra charge as specified. 4. All parts are pre drilled for ease of installation. C K L J A B. Top hinge bracket C. Bottom hinge bracket These are heavy Zamac No. 3 castings, chrome plated with a 5/8 flange which wraps around the pilaster for maximum strength. Hinge brackets are throughbolted with one way, theft-proof screws. The bottom hinge works on opposing zytel cams which are self lubricating to insure trouble free operation and quiet action. D A. Upper door bracket and stainless steel pin. This is a heavy Zamac casting made an integral part of the door as it is inbedded with in preformed abscesses. The stainless steel pin goes through door and brack for three-point bearings. Operates in a zytel self-lubricating bushing. B C G D. Concealed latch and emergency cover plate. Latch has a fully concealed case made of Zamac No. 3 castings with stainless steel bolt and mortised face plates fully tamper and theft proof. Cover plate is a Zamac No. 3 chrome plated casting which snaps in place. This has a slot for emergency entrance feature as standard. F E. Doorstrike and keeper. Heavy Zamac No. 3 chrome plated castings with a wrap around flange for maximum durability that is through bolted with one way theft proof screws. F. Wall bracket. and G. Pilaster brackets are heavy Zamac No. 3 chrome plated castings or anodized aluminum. H H. Welded construction. We weld the doors and pilasters 18 on center around the entire perimeter for maximum strength and durability. We weld and grind all corners. No corner clips are used. E J. Carrying member for Type aamco Floor supported is a 1/2 x 1 solid bar for maximum strength and durability. This saves installation time and assures a plumb and long lasting installation. K. Jack-leveling device for Type aamco Headrail Braced is used as standard. Heavy-duty bolt provides loadbearing and a permanent base for panels and pilaster with the use of levelling screws. This saves installation time and assures a plumb and long lasting installation. L. Pilaster Shoe. Shoe is made of 302 stainless steel and is of one piece construction. Shoe assembly has snap down action on a concealed hold down clip. This eliminates unsightly screws and saves on installation time. Shoe is vandal-proof and cannot be removed. Toll Free: Fax: blainehdw@aol.com J9-5 L J K

5 BA-1 BA-2 BA-3 1/2 Quart Capacity Toilet Partition Accessories BA-4 BA-5 Size 30 X X X X 36 Size 30 X X X 36 BA-6 Paper Towel Dispenser BA7 Stainless Steel Angle Frame Mirror With Shelf Recessed Dual Roll Stainless Steel Toilet Paper Dispenser BA8 Surface Mount Soap Dispenser Heavy Duty Robe Hook Stainless Steel Shelf With Soap Dispenser BA-9-5X16 BA-9-5X30 BA-9-6X12 BA-9-6X18 Stainless Steel Shelving Available In 5", 6" & 8" Depths Stainless SteelTowel / Waste Disposal - 21 Gallon Capacity BA15 3/4" Size* 18" 24" 30" 36" Aluminum Towel Bar w/ Brackets Select Length* **Many other accessories, not shown here, also available from Blaine. Please call Customer Service for assistance.** Brackets, shown below, are used with solid plastic toilet partition panels. 54 Long Plastic H Bracket Plastic Double Ear Wall Bracket Aluminum H Bracket Stainless Steel H Bracket Beige Black Burgundy Mocha Glacier Gray Hunter Green Blueberry Sand Castle Fossil White-058 Plastic Single Ear Wall Bracket Beige Black Burgundy Mocha Glacier Gray Hunter Green Blueberry Sand Castle Fossil White Long Aluminum Double Ear Wall Bracket Stainless Steel Double Ear Wall Bracket Beige Black Burgundy Mocha Glacier Gray Hunter Green Blueberry Sand Castle Fossil White Heat Sink Bar Aluminum Single Ear Wall Bracket Stainess Steel Single Ear Wall Bracket J9-6 Toll Free: Fax: blainehdw@aol.com

6 Blaine Lavatory Partitions DOORS Stock Number TPDR9100 TPDR9101 TPDR9102 TPDR9103 TPDR9104 TPDR9105 TPDR9106 TPDR9107 PANELS TPPL9108 TPPL9109 TPPL9110 TPPL9111 TPPL9112 TPPL9113 TPPL9114 TPPL9115 TPPL9116 TPPL9117 TPPL9118 TPPL9119 TPPL9120 TPPL9121 TPPL9122 TPPL9173 TPPL9174 PILASTERS TPPR9124 TPPR9125 TPPR9126 TPPR9127 TPPR9128 TPPR9129 TPPR9130 TPPR9131 ALUMINUM HEADRAILS TPAH9134 TPAH9135 TPAH9136 TPAH9137 TPAH9138 TPAH9139 TPAH9140 TPAH /8"w x 58"h Door 23-5/8"w x 58"h Door 25-5/8"w x 58"h Door 27-5/8"w x 58"h Door 29-5/8"w x 58"h Door 31-5/8"w x 58"h Door 33-5/8"w x 58"h Door 35-5/8"w x 58"h Door 15-1/2"w x 58"h Panel 17-1/2"w x 58"h Panel 21-1/2"w x 58"h Panel 23-1/2"w x 58"h Panel 25-1/2"w x 58"h Panel 27-1/2"w x 58"h Panel 29-1/2"w x 58"h Panel 31-1/2"w x 58"h Panel 33-1/2"w x 58"h Panel 35-1/2"w x 58"h Panel 37-1/2"w x 58"h Panel 39-1/2"w x 58"h Panel 45-1/2"w x 58"h Panel 51-1/2"w x 58"h Panel 54-1/2"w x 58"h Panel 57-1/2"w x 58"h Panel 69-1/2"w x 58"h Panel 3"w x 82"h Pilaster 4"w x 82"h Pilaster 5"w x 82"h Pilaster 6"w x 82"h Pilaster 7"w x 82"h Pilaster 8"w x 82"h Pilaster 10"w x 82"h Pilaster 12"w x 82"h Pilaster 37" L Aluminum Headrail 56" L Aluminum Headrail 66" L Aluminum Headrail 70" L Aluminum Headrail 72" L Aluminum Headrail 74" L Aluminum Headrail 82" L Aluminum Headrail 96 L Aluminum Headrail SCREENS & POSTS TPSP9123 6" x 70"h Screen Pilaster-use a 35-1/2"- 45-1/2"w panel for pilaster supported urinal screen (sold separately) TPUS "w x 42"h bracket supported screen TPUS "w x 42"h bracket supported screen TPAP Aluminum Post - 1-3/4" x 1-3/4" x 70"h Toilet Partitions & Hardware Entry And Urinal Screens Complete with mounting hardware Bracket Supported Finishes: Baked enamel on steel and high pressure plastic laminate. Sizes: 18"w x 42"h 24"w x 42"h Post Supported Finishes: Baked enamel on steel and high pressure plastic laminate. Panel Sizes: 15-1/2"x 17-1/2"x 21-1/2", 23-1/2", 25-1/2", 27-1/2", 29-1/2", 31-1/2" and 33-1/2" wide x 58"high Aluminum Post: 1-3/4" x 1-3/4" x 70"high Pilaster Supported Finishes: Baked enamel on steel and high pressure plastic laminate. Panel Sizes: 35-1/2", 37-1/2", 39-1/2" and 45-1/2" wide x 58" high Pilaster Size: 6"w x 70" high For more infomation regarding our Toilet Partitions, including color selection and material used, please contact our Customer Service Department at Doors, panels, pilasters and urinal screens - specify steel by adding 050 to the end of the stock number or plastic laminate by adding 058. Alum. headrail - pecify 040 for use on steel pilasters or PL-040 for use on plastic laminate pilasters. Toll Free: Fax: blainehdw@aol.com J9-7

7 5 Day Quick Ship Headrail Braced Partitions Available in Stainless Steel or Baked Enamel on Steel in Almond, Light Gray and Tan. Blaine Standard Toilet Partition Layouts Determine the following when ordering Baked Enamel on Steel, Stainless Steel, High Pressure Laminate, Solid Phenolic Laminate & Solid Plastic Polymer Partitions: 1. Determine Layout Type (see Below): Free Standing In Corner Between Walls Alcove Entry & Urinal Screens 2. Partition Type and Style: A. Solid Plastic, Metal or Laminate B. Type of Brace Required (headrail, floor, ceiling hung) 3. Complete Layout of Toilet Partition Stall(s) A. Width of stall B. Depth of stall C. Total width available D. Width of doors, if known. 4. Indicate whether a handicapped accessible unit (ADA) is required. 5. Indicate color required. Metal partitions are solid in a standard 58 door height. Solid plastic partitions are sold in a standard 55 door height. Replacement doors, panels, pilasters and hardware are also available separately. Typical Toilet Partition Layout Finished Ceiling Ceiling Hung Free Standing w/ 1 Stall Btwn Walls w/ 2 Stalls Headrail Braced (most commonly used) In Corner w/ 1 Stall Alcove J9-8 Floor Braced Toll Free: Fax: blainehdw@aol.com

8 GRAB BAR APPLICATIONS STRAIGHT BARS Specify center support when required FLANGE SPECIFICATIONS ROUND BAR NUMBER LENGTH NUMBER 12 12" NUMBER 16 16" NUMBER 18 18" NUMBER 24 24" NUMBER 32 32" NUMBER 36 36" NUMBER 42 42" NUMBER 48 48" Grab Bars This is strictly a representation of the grab bars available through Blaine. Contact our Customer Service Department for detailed literature and assistance. CONCEALED SNAP-ON 3" 2-11/16 TUBE DIAMETER 1" Bolt Hole Circle 2-1/4" 3/16" #73 Three 1/4-20 set screws in lip #69 7/32" X 1/2" 1-3/4" 2-11/16" 1-1/4" X 3/8" 5/16 x 1/2 Cover rotates to expose mounting holes for easier installation 2-1/4 #89 3-3/4 1-1/4" #74 #71 1-1/2" #75 #72 #90 #91 OTHER GRAB BAR APPLICATIONS No. 5R Right Hand Shown No. 5L Left Hand Shown No. 52 No " 32" 26" 26" 12" o " 16" 16" No " No. 75R Right Hand Shown 30" No " 24" No " 24" 33" 33" 8" 33" 16" 6" No. 50 No. 40 Right Hand Shown No. 10 Non Handed 54" 36" 40" 7" 45" 32" 7" 20" No " 12" 32" 36" Toll Free: Fax: blainehdw@aol.com J9-9

9 Door Hardware Door Size Post Size Chrome Zamac Latch Top Bottom Strike/ Hinge Hinge Keeper One Pc Keeper One Pc Strike Top Insert Bottom Insert Hinge Pin Chrome Brass Polished Brass Cast S.S. INSWING All packs are supplied with series #4000 door hooks and mounting hardware. TOP HINGE ASSEMBLY / /16 BOTTOM HINGE ASSEMBLY Door Size Post Size Chrome Zamac Latch Top Bottom Strike/ One Pc Hinge Hinge Keeper Strike Top Insert Bottom Insert Hinge Pin Door Pull Door Stop Chrome Brass Polished Brass Cast S.S / / OUTSWING All packs are supplied with series #4020 door hooks and mounting hardware /16 J9-10 Toll Free: Fax: blainehdw@aol.com

10 REPLACEMENT PACKS Door Hardware TOP HINGE ONLY 9713 BOTTOM HINGE ONLY TOP & BOTTOM HINGES Toll Free: Fax: J9-11

11 7011 Surface Mounted Door Packs Inswing All packs are supplied with series #4000 door hooks and mounting hardware Door Size Post Size Part # Swing of Door Latch Hinge Set Strike/ One Pc Keeper Strike One Pc Keeper Chrome Brass Polished Brass / / / /2 Door Size Post Size Part # Swing of Door Latch Hinge Set Strike/ Keeper One Pc Strike One Pc Keeper 1-9/ /8 2-3/ /4 3-1/8 Door Size Post Size Part # Swing of Door Latch Hinge Set One Pc Strike One Pc Keeper / /32 J9-12 Toll Free: Fax: blainehdw@aol.com

12 All packs are supplied with series #4020 door hooks and mounting hardware Outswing Surface Mounted Door Packs / / / / /16 3-1/2 4-1/ / Toll Free: Fax: blainehdw@aol.com J9-13

13 Prepackaged Hardware All packs are supplied with mounting hardware Panel & Pilaster Packs Two ear panel packs One ear panel packs One ear pilaster packs Two ear pilaster packs J9-14 Toll Free: Fax:

14 Prepackaged Hardware Alcove, Urinal, Angle Bracket, Headrail Packs All packs are supplied with mounting hardware Alcove Packs (Two Ear) Alcove Packs (One Ear) Urinal Screen Packs Angle Bracket Packs Headrail Corner Pack Headrail Mounting Packs Toll Free: Fax: J9-15

15 One Ear 1840 Wall Brackets Castings All Brackets At Lengths Two Piece-Mini 1580 One Ear-Mini 1853 Two Ear 1750 Two Ear-Urinal 1613 Two Ear - Mini 1810 Two Ear-Urinal (X-High) 1280 Two Ear- (X-High) 1260 One Ear - (X-High) 1270 Two Piece 1863 B C 1 U -Bracket (X- High) /2 1/2 L Bracket / /4 Wing Wing U -Bracket / /4 J9-16 Toll Free: Fax: blainehdw@aol.com

16 Two Ear 1759 One Ear 1849 Stainless Steel Stampings All Brackets With #4 Satin Finish Two Ear- Urinal 1619 Wall Brackets Two Ear 2349 Two Piece 1869 Two Piece- Mini 1589 Two Ear- Braced 4439 One Ear -Mini 1859 U Bracket 1919 L Bracket One Ear 2339 U Bracket 2369 B Inside Bracket 1209 Braced Angle 4519 Two Ear-Urinal (X-Heavy) 4339 H Bracket 2859 Length C One Ear - (X- High) 1319 Toll Free: Fax: blainehdw@aol.com J9-17

17 Wall Brackets Two Ear 2344 Aluminum Extrusions One Ear 2334 Two Ear 1754 One Ear 1764 Two Ear - Urinal 1614 U Bracket 2364 U Bracket - (X-Long) 2304 U Bracket 1914 L Bracket 1864 L Bracket 2684 Two Ear - (X- Long) 2264 One Ear - (X-Long) 2274 H Bracket 1734 B H Bracket 2858 Lengths C All Parts T-6063-T5 Extruded Aluminum With Clear Anodized Finish J9-18 Toll Free: Fax: blainehdw@aol.com

18 7011 Surface Mounted Hinges / / / /32 3-3/ /16 3-5/8 3-5/8 2-13/ /32 8-1/4 1-3/4 Toll Free: Fax: blainehdw@aol.com J9-19

19 Square Edge Posts 2-1/2 1-19/32 Strike & Keepers * 5210 Outswing 5140 Inswing * * * 5280 Inswing 5240 In or Out 5260 Outswing * 5230 In or Out *Overall height - 2-1/2 center to center hole spacing - * 5110 Inswing * 5340 Inswing * * * * 5160 Inswing Inswing 5180 Inswing 5170 Inswing 5798 Inswing Inswing / Outswing 5898 Outswing 5960 In or Out 5980 Inswing 5970 Outswing 5650 Inswing 5640 Outswing J9-20 Toll Free: Fax: blainehdw@aol.com

20 Round Edge Posts 5430 In or Out 5320 In or Out Strike & Keepers 5410 Outswing 5330 inswing 5310 Inswing 5550 In or Out 5510 In or Out 5520 In or Out 5470 In or Out 5570 Outswing 5580 Inswing Stamped Stainless Steel Square Edge Posts* 6789 Inswing 6499 Inswing 6389 Inswing Inswing Inswing 2-7/8 1-7/ Inswing 6329 Inswing 6469 Inswing Outswing Outswing 6569 Outswing 6459 Outswing Toll Free: Fax: J9-21

21 J9-22

22 J9-23

23 J9-24

24 , 3630, 3650, , 3810, 3860, 3930 Square Edge Posts Wrap Around Gravity Pivot Hinges , 3130, 3150, , 3310, 3430, Post Size Location Chrome Zamac Chrome Brass Polished Brass Cast S.S. Description Pin Pintle or Candle Cam Dim Post Door Pivot Hinge (Roller Bearing Design) Toll Free: Fax: J9-25

25 Wrap Around Gravity Pivot Hinges Round Edge Posts 3510 Post Size Location Chrome Zamac Chrome Polished Brass Brass Cast S.S. Description Pin Pintle or Candle Cam Dim Flats Location Chrome Zamac Chrome Brass Polished Brass Cast S.S. Description Pin Pintle or Candle Cam Dim , 3940, , 3470, 3870 J9-26 Toll Free: Fax:

26 , 3630, 3650, , 3810, 3860, 3930 Square Edge Posts Wrap Around Gravity Pivot Hinges , 3130, 3150, , 3310, 3430, Post Size Location Chrome Zamac Chrome Brass Polished Brass Cast S.S. Description Pin Pintle or Candle Cam Dim Post Door Pivot Hinge (Roller Bearing Design) Toll Free: Fax: J9-27

27 Wrap Around Gravity Pivot Hinges Round Edge Posts 3510 Post Size Location Chrome Zamac Chrome Polished Brass Brass Cast S.S. Description Pin Pintle or Candle Cam Dim Location Chrome Zamac Chrome Brass Polished Brass Cast S.S. Description Pin Pintle or Candle Cam Flats Dim 1-7/16 2-1/ / , 3940, /4 2-1/ , 3470, 3870 J9-28 Toll Free: Fax:

28 3-11/ /4 2-21/32 1-3/4 2-11/ Concealed Latches & Knob Sets 1-3/8 For 1 Doors Low stock 1-3/ /32 Chrome Zamac 1-3/4 1-3/4 1-3/4 1-1/4 2-11/ / /16 1-3/4 1-3/ /4 1-3/4 2-11/16 3-3/4 2-21/32 3-3/4 2-11/16 3-3/4 Chrome Zamac Chrome Zamac 1-3/ /4 1-5/8 3-3/4 1-3/4 1-3/ /8 1-5/8 1-5/8 2-13/16 1-5/8 2-9/ Chrome Zamac Chrome Brass Polished Brass Cast Stamped Stainless Stainless Steel Steel Door Pulls & Fix-It Kits 4-3/ / Chrome Zamac Cast Stainless Steel 3-7/ / /8 4-1/16 2 Toll Free: Fax: blainehdw@aol.com J9-29

29 All shoes are made of 22 gauge #304 stainless steel with #4 satin finish Pilaster Shoes & Anchoring Devices *3 HIGH PILASTER SHOES *4 HIGH PILASTER SHOES 4 HIGH OFFSET PILASTER SHOES widths measured at top opening *Custom sizes available upon request. Open ended available in all sizes. ANCHOR SHOES J9-30 Toll Free: Fax: blainehdw@aol.com

30 Pilaster Post Anchoring Packs & Devices Toll Free: Fax: J9-31

31 Door Inserts B Post Size Location Chrome Zamac Brass Zamac Satin Finish Zamac Description Pin Pintle or Candle Cam Dim B Dim Post Size Location Chrome Zamac Unplated Zamac Description Pin Pintle or Candle Cam J9-32 Toll Free: Fax: blainehdw@aol.com

32 Alcove Clips & End Plugs Toll Free: Fax: J9-33

33 Headrail & Headrail Brackets J9-34 Toll Free: Fax:

34 SCREW PACKS Screw Packs & Fasteners Toll Free: Fax: J9-35

35 MACHINE SCREWS One Way Round Tapping Screws FASTENERS PHILLIPS TAPPING SCREWS SHOULDER SCREWS BARREL NUTS SIX LOBE FASTENERS (T-27 HEADS) BARREL NUTS PAN HEAD TAPPING SCREWS Without Center Pin 8-32 OVAL HEAD (T-20) TAPPING SCREWS SHOULDER SCREWS SHOULDER SCREWS Without Center Pin All Barrel Nut & Shoulder Screws Have a 1/4 Outer Diameter J9-36 Toll Free: Fax: blainehdw@aol.com

36 LISTED BY MANUFACTURER (Available in other materials & finishes) ACCURATE REPLACEMENT PARTS All AMERICAN AMERICAN SANITARY AMPCO Toll Free: Fax: J

37 LISTED BY MANUFACTURER (Available in other materials & finishes) AMPCO REPLACEMENT PARTS BOBRICK COLUMBIA Top Assembly Bottom Assembly J9-38 Toll Free: Fax:

38 LISTED BY MANUFACTURER (Available in other materials & finishes) COMRES MANUFACTURING 2760 REPLACEMENT PARTS COMTEC / CAPITAL PARTITIONS FIAT Toll Free: Fax: blainehdw@aol.com J9-39

39 LISTED BY MANUFACTURER (Available in other materials & finishes) FLUSH METAL REPLACEMENT PARTS GENERAL PARTITION Top Assembly Bottom Assembly J9-40 Toll Free: Fax:

40 LISTED BY MANUFACTURER (Available in other materials & finishes) GENERAL PARTITION (continued) REPLACEMENT PARTS GLOBAL STEEL Toll Free: Fax: J9-41

41 LISTED BY MANUFACTURER (Available in other materials & finishes) GLOBAL STEEL (continued) REPLACEMENT PARTS 5410 HADRIAN Top Assembly Bottom Assembly KNICKERBOCKER METPAR J9-42 Toll Free: Fax:

42 LISTED BY MANUFACTURER (Available in other materials & finishes) METPAR (continued) REPLACEMENT PARTS Top Assembly Bottom Assembly MILLS Top Assembly Bottom Assembly Toll Free: Fax: J9-43

43 LISTED BY MANUFACTURER (Available in other materials & finishes) SANTANA / HINY HIDERS REPLACEMENT PARTS Top Assembly Bottom Assembly SANYMETAL SHANAHAN J9-44 Toll Free: Fax: blainehdw@aol.com

44 Hooks, Door Stops & Latches / /8 3-1/ /32 1-3/16 2-5/16 2-1/8 2-1/ / /4 2-3/4 2-5/ /4 3/ / /16 2-3/ / /2 2-3/4 1-3/4 13/ /2 3-1/2 2-3/4 3-1/ Toll Free: Fax: blainehdw@aol.com J9-45

45 Cams, Pintles & Hinge Pins x Top Assembly Bottom Assembly J9-46 Toll Free: Fax: blainehdw@aol.com

46 New Products NEW ITEMS SLIDE LATCH Satin Finish Cast Zamac Design 2-3/4 center-to-center holes SLIDE LATCH Heavy Duty Cast Stainless Steel Design HINGED BRACKET Can be rotated for any angle application Hinged Wall Bracket /4 Hinged Wall Bracket SPRING LOADED SURFACE HINGE Heavy duty stainless steel tension adjustable high - polished high - satin high - polished high - satin Toll Free: Fax: blainehdw@aol.com J9-47