Manual and Mechanical Valves

Transcription

1 Manual and Mechanical Valves ROSS ONTROLS

2 Pushbutton Palm Button Toggle Lever am Roller Plunger Hand Lever oot Pedal with Guard Pendant Accessories VALVE TYPE lush & Mushroom Pushbutton VALVE SERIES Palm Button & Heavy Duty Palm Button Selector Switch Toggle Lever Lever Hand Lever Pedal & Treadle oot Pedal with Guard Mechanical am Roller & Plunger Valves Pendant ontrol AVAILABLE PORT SIZES UNTIONS MAX. LOW v /8 / 3/8 / 3/ / / 3/ / /3 5/ & Page RM &

3 lush & Mushroom Pushbutton Series 3-Way -Position Valves, lush Pushbutton, Spring Return Green Button Red Button NPT Threads BSPP Treads NPT Threads BSPP Treads.77 (5).6 (37).6 (3) /8 3BPG D3BPG 3BPR D3BPR (0.3) 3 / 3BPG D3BPG 3BPR D3BPR (0.5) 3-Way -Position Valves, Mushroom Button Spring Return Green Button Red Button V NPT Threads BSPP Treads NPT Threads BSPP Treads /8 3BMBG D3BMBG 3BMBR D3BMBR (0.3) / 3BMBG D3BMBG 3BMBR D3BMBR (0.6) lush Pushbutton / (99) 3-G 0.7 /.3 (8) /8 (8) 3.. (79) 0.93 (36) () 0.58 (5) -o..38 (35).30 (33) 0.98 (5).37 (35) VOD IOD (6) ( O-Rings) x0.08 ()=0.3 (8) 0.8 () 0.79 (0) 0.58 (5) 3.77 (5).3.06 (7).6 (37).6 (3) 0.55 () 3-o 5..0 (6).38 (35).30 (33).8 (30).57 (0) VOD IOD 3.9 (99).06 (7) ( O-Rings) x0.08 ()=0.3 (8) 3-G / 0.98 (5) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8) Mushroom Button.77 (5).6 (37).6 (3) (99) 0.7 /8.3 () (8) 3-G (8) 3. / /8 (79) (36) () 0.58 (5) -o (5).37 (35) VOD IOD (6) ( O-Rings) x0.08 ()=0.3 (8) 0.8 () 0.79 (0) 0.58 (5).77 (5).3.06 (7).6 (37).6 (3). () 0.55 () 3-o 5..0 (6).8 (30).57 (0) VOD IOD 3.9 (99).06 (7) ( O-Rings) x0.08 ()=0.3 (8) 3-G / 0.98 (5) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8) Accessories Silencers Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads Width Length /8 Male 5500A003 D5500A ().0 (5) 0. (0.) / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. Normally losed or Normally Open simply by piping the inlet supply accordingly. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Operating Pressure Spool & Sleeve Inline Ambient/Media: 0 to 75 ( to 80 ) iltered air 5 to 50 psig (0.3 to 0 bar) Valve Body: ast Aluminum Button: Stainless steel, Polyoxymethylene onstruction Material Spool: Aluminum Spring: Stainless Steel Switch Parts: Glass filled Nylon Valid Operation Distance: 0. inches (5.5 mm). Invalid Operation Distance: 0.0 inches (.0 mm). Pressure for Valid/Invalid Operation: 7.7 lb (3.5 Kg). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.3

4 Palm Button & Palm Button & Series -Way -Position Valves, Palm Button, Spring Return Normally losed Average Response onstants** - NPT Threads BSPP Treads - / A00 DA (0.5) 3-Way -Position Valves, Palm Button, Spring Return Normally losed Average Response onstants** lb,, 3 (kg) NPT Threads BSPP Treads - -3 / 3A00 D3A (0.5) Palm Button -Way -Position Valves, Palm Button Spring Return Normally losed Average Response onstants** Green Button Red Button - NPT Threads BSPP Treads NPT Threads BSPP Treads - / B00 DB00 B003 DB (0.8),, 3 3-Way -Position Valves, Palm Button Spring Return Normally losed Average Response onstants** Green Button Red Button V NPT Threads BSPP Treads NPT Threads BSPP Treads - -3 / 3B00 D3B00 3B003 D3B (0.8) Palm Button ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications..8 (6) 3.7 (83) (inlet).56 (0) 0.67 (7) Palm Button. 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70).7 (63) Palm Button Travel 0.8 (5).86 (73) 0.50 (3) (inlet) 0.3 (8).50 (6).5 (3) 0.8 (7) places.67 (68).33 (3) 0.75 (9).50 (38).50 (38) 3.00 (76) Accessories & Options Silencers for 3-way Valves Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads Width Length / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. RING GUARD for Palm Button Model Number 78B30.75 ().50 (6) Helps to protect against accidental valve actuation. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Side and bottom mounting flanges Operating Pressure Ambient/Media: -0 to 75 (-3 to 80 ) or temperatures below 0 ( ) air must be free of water vapor to onstruction Material prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. iltered air 5 to 50 psig (0.3 to 0 bar) Valve Body: ast Aluminum Button: Pushbutton: Aluminum Palm Button: High-strength polymer IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover.. ROSS ONTROLS. All Rights Reserved. Rev. 06/7/8

5 Selector Switch Series 3-Way -Position Valves, Detented Black Switch Knob - NPT Threads BSPP Treads - /8 3BSLB D3BSLB (0.) / 3BSLB D3BSLB (0.7) 3 /8.77 (5) ().6 (8) 0.58 (5) -o (8) 0.98 (5).37 (35) VOD IOD 3.9 (99). (36) 0.3 (6) ( O-Rings) x0.08 ()=0.3 (8) 3-G/8 0.8 () 0.79 (0) 0.7 (8) 3. (79) 0.58 (5).06 (7) ON 0.8 ().6 (37) 90.6 (3) O /.77 (5).3.06 (7).6 (8) 0.55 () 3-o 5..0 (6).8 (30).57 (0) VOD IOD.06 (7) 3.9 (99) ( O-Rings) x0.08 ()=0.3 (8) 3-G/ 0.98 (5) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8).06 (7) ON 0.8 ().6 (37) 90.6 (3) O Normally losed or Normally Open simply by piping the inlet supply accordingly. Accessories Silencers Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads Width Length /8 Male 5500A003 D5500A ().0 (5) 0. (0.) / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Operating Pressure Spool & Sleeve Inline Ambient/Media: 0 to 75 ( to 80 ) iltered air 5 to 50 psig (0.3 to 0 bar) Valve Body: ast Aluminum Button: Stainless steel, Polyoxymethylene Spool: Aluminum onstruction Material Seals: Nitrile Rubber Spring: Stainless Steel Switch Parts: Glass filled Nylon Valid Operation Distance: 0. inches (5.5 mm). Invalid Operation Distance: 0.0 inches (.0 mm). Pressure for Valid/Invalid Operation: 7.7 lb (3.5 Kg). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.5

6 Toggle Lever Series -Way -Position Valves, Spring Return Average Response onstants** NPT Threads BSPP Treads - / A00 DA (0.5) 3-Way -Position Valves, Spring Return Average Response onstants** NPT Threads BSPP Treads - -3 / 3A00 D3A (0.5) ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications..8 (6) 5.9 (50) (inlet) (7) (0). 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70) Accessories Silencers for 3-way Valves Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads Width Length / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Side and bottom mounting flanges Operating Pressure Ambient/Media: -0 to 75 (-3 to 80 ) onstruction Material or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. iltered air 5 to 50 psig (0.3 to 0 bar) Valve Body: ast Aluminum Lever Knob Material: Glass filled Nylon IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..6 ROSS ONTROLS. All Rights Reserved. Rev. 06/7/8

7 Lever 36 Series Operators 3-Way -Position Valves, Detented or Spring Return Average Response onstants** NPT Threads BSPP Treads - -3 / Detented 363A003 D363A (0.6) / Spring Return 363A00 D363A (0.6) Detented 0 Spring Return Operators -Way -Position Valves, Detented or Spring Return Average Response onstants** NPT Threads BSPP Treads -, - -3, -3 / Detented 366A003 D366A (.) / Spring Return 366A00 D366A (.) Detented Spring Return ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3/ Valve 3 (exhaust).3 (9).73 () (inlet) 3.0 (8) Spring Return Model 3. (87).7 ().8 (7). (36) 0.8 (7) (5) (5) 3.8 (88) 0.50 (3).06 (7) 0.90 (3) 7.9 (83) / Valve 3.8 (97).56 (0) 0.7 (8) 7.87 (00). (6).88 () 3 (exhaust). (6). (3).85 (7) 3.65 (93) (inlet ).5 (57) 0.7 ().50 () places Accessories Silencers for 3-way Valves Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads Width Length / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. or models with vertical handle, consult ROSS. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Side and bottom mounting flanges Operating Pressure Ambient/Media: -30 to 75 (-3 to 80 ) onstruction Material or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -30 (-3 ), consult ROSS. iltered air 5 to 50 psig (0.3 to 0 bar) Valve Body: ast Aluminum IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.7

8 Hand Lever - Horizontal 3 Series -Way 3-Position Valves, Detented Average Response losed/open V onstants**,, 3 enter NPT Threads BSPP Threads In-Out Out-Exh. In-Out Out-Exh. 3/8 / Open 36A3007 D36A (0.9) 3/8 / losed 36A300 D36A (0.9) / 3/ Open 36A007 D36A (.7) / 3/ losed 36A00 D36A (.7) 3/ Open 36A5007 D36A (.3) 3/ losed 36A500 D36A (.3) / Open 36A6007 D36A (.5) / losed 36A600 D36A (.5) / / Open 36A7007 D36A (5.0) / / losed 36A700 D36A (5.0) Open enter 8.05 (0) losed enter (inlet) Ø 0.3 (8) [ places] # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3/8 /.7 (8) (inlet) Ø 0. () [ places].50 (38) 6.77 (7).0 () (9) (38).06 (5) 3.69 (9).38 (6).3 (0) (3) (5)..06 (7) 3 (exhaust).0 (36) 9.00 (9) 5.53 (0) (5) (5).63 (57).75 () 3.06 (78) 5.63 (3) (7) (35).75 (70).38 (35) 3 (exhaust).8 (37) 3/ (inlet) Ø 0.7 () [ places] 8.63 (73) (inlet) Ø 0.56 () [ places].60 () (57).3.5 (9) (57) 3.00 (76) 5.37 (36) 3.50 (89) 6.38 (6) (9)(38) 3.5 (83).6 () 3 (exhaust).00 (5) 3.50 (33) 7.9 (0) (38) (76) 3.75 (95) 6.8 (73).3 (0) 7.9 (0) (5) (5).3 (05).06 (53) 3 (exhaust) 8.75 (76) (inlet) Ø 0.56 () [ places] /.0 (30).0 (358) 8.6 (08) (38) (76) 3.9 (00) 7.3 (8).3 (0) 8.5 (0).5.3 (9) (57).75 ().38 (60) 3 (exhaust) STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media iltered air Bottom mounting flanges Operating Pressure 5 to 50 psig (0.3 to 0 bar) Ambient/Media: -0 to 75 (-0 to 80 ) onstruction Material Valve Body: ast Aluminum or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-0 ), consult ROSS. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..8 ROSS ONTROLS. All Rights Reserved. Rev. 06/7/8

9 Hand Lever - Vertical 3 Series -Way 3-Position Valves, Detented or Non-Detented Average Response losed/open V onstants** enter,, 3 NPT Threads BSPP Threads In-Out Out-Exh. In-Out Out-Exh. 3/8 / Open 36A3009 D36A (.) 3/8 / Open 36A30# D36A30# (.) 3/8 / losed 36A303 D36A (.) 3/8 / losed 36A30# D36A30# (.) / 3/ Open 36A009 D36A (.) / 3/ Open 36A0# D36A0# (.) / 3/ losed 36A03 D36A (.) / 3/ losed 36A0# D36A0# (.) # Non-detented models. Open enter losed enter ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications..3 (0) / 0.8 (.73) (inlet) Ø 0.3 (8) [ places] (3) (5) (9) (38).06 (5) 3.69 (9).38 (6).3 (0).06 (7) 3 (exhaust) 5.63 (3) 3/ 3.5 (3) (inlet) Ø 0. () [ places] (7) (35).75 (70) (5) (5).63 (57).75 () 3.06 (78) 5.63 (3).38 (35) 3 (exhaust) STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media iltered air Bottom mounting flanges Operating Pressure 5 to 50 psig (0.3 to 0 bar) Ambient/Media: -0 to 75 (-0 to 80 ) onstruction Material Valve Body: ast Aluminum or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-0 ), consult ROSS. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.9

10 Pedal & Treadle 36 Series 3-Way -Position Valves, Pedal, Spring Return Average Response onstants** NPT Threads BSPP Threads - -3 / 363A00 D363A (0.6) -Way -Position Valves, Pedal, Spring Return Average Response onstants** NPT Threads BSPP Threads -, - -3, -3 / 366A00 D366A (.3 3-Way -Position Valves, Treadle, Detented Average Response onstants** NPT Threads BSPP Threads - -3 / 363A00 D363A (0.6) 0 -Way -Position Valves, Treadle, Detented Average Response onstants** V NPT Threads BSPP Threads -, - -3, -3 / 366A00 D366A (.3 ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3/ Pedal.55 (65).6 () 0. (3) 3.8 (88) 6.35 (6).06 (7) 0.50 (3).8 (7) (8) (87) 3 (exhaust).3 (9).73 () (inlet).00 (5) 0.8 (7) places / Pedal.87 (73) 0. (5) 7.9 (83). (6).88 () 0.7 (8) 3 (exhaust).38 (60) (inlet). (6). (3).5 (57).50 ().85 (7) 3.65 (93) 0.3 (8) dia. places.9 (8) 0.8 (0) 3/ Treadle / Treadle 6.0 (5) 3.8 (88) 3. (87).06 (7) 0.50 (3) 3 (exhaust).8 (7).88 (8).3 (9).73 () (inlet).00 (5) 0.8 (7) places.8 (30) 6.50 (65). (6).88 () STANDARD SPEIIATIONS (for valves on this page):.5 (6) 0.7 (8) 3 (exhaust).38 (60) (inlet). (6). (3).5 (57).50 ().85 (7) 3.65 (93) 0.3 (8) dia. places onstruction Design low Media iltered air Line Operating Pressure 5 to 50 psig (0.3 to 0 bar) Ambient/Media: -30 to 75 (-3 to 80 ) onstruction Material Valve Body: ast Aluminum or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -30 (-3 ), consult ROSS. Note: The 3/ and / treadle valves are not designed to be used to actuate clutch/brake mechanisms on mechanical power presses. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..0 ROSS ONTROLS. All Rights Reserved. Rev. 06/7/8

11 oot Pedal with Guard Safeguarding RM Series 5-Way -Position Valves, Pedal Operators NPT Threads / Non-locking foot pedal RM0-08G 0.5. (0.9) Locking foot pedal RM0-08LG 0.5. (0.9) 5 5/ Spring Return without Lock 5 5/ Detented with Lock.65 () 5.3 (33).08 (53) 3. (87) 0.8 () 0.3 (6) 5.39 (37) 0. (0.5) 5.3 (35).87 (73) 3-/ 0.98 (5) 0.3 (6).6 () 3.3 (85) 3.89 (99) 0.3 (6) 0.9 ().98 (75.7) 6.69 (70) 7.78 (00) 9.6 (5) 0. (3) onvertible to a 3-Way function. Note: Designed to meet OSHA 90.7 Mechanical power presses, with protective guard to prevent accidental actuation. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media Line Ambient/Media: 3 to 0 (-5 to 60 ) iltered air Operating Pressure 0 to 0 psig (0 to 8. bar) onstruction Material Valve Body: Aluminum Guard: Plastic IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.

12 Mechanical am Valves am Roller & Plunger Series -Way -Position Valves, -Direction am Roller Average Response onstants** NPT Threads BSPP Threads In-Out / 3A00 D3A (0.5) 3-Way -Position Valves, -Direction am Roller Average Response onstants** NPT Threads BSPP Threads In-Out Out-Exh. / 33A00 D33A (0.5) -Direction Roller -Way -Position Valves, -Direction am Roller Average Response onstants** NPT Threads BSPP Threads V In-Out / 3A00 D3A (0.5) 3-Way -Position Valves, -Direction am Roller Average Response onstants** NPT Threads BSPP Threads In-Out Out-Exh. / 33A00 D33A (0.5) -Direction Roller -Way -Position Valves, Plunger Average Response onstants** NPT Threads BSPP Threads V In-Out / 3A003 D3A (0.5) 3-Way -Position Valves, Plunger Average Response onstants** NPT Threads BSPP Threads In-Out Out-Exh. / 33A003 D33A (0.5) 3 Plunger ** Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. -Direction Roller Travel 0.0 to 0.9 (.5 to 7.) -Direction Roller Travel 0.05 to 0.0 (.3 to.5) Plunger Travel 0.07 to 0.5 (.8 to 6.).37 ().50 ().8 (6) 3.38 (86) (inlet).56 (0) 0.67 (7). 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70) Accessories Silencers for 3-way Valves Thread Model Number Avg. Dimensions inches (mm) Type NPT Threads BSPT Threads Width Length / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 90 psig (0 to 0 bar) maximum. low Media: iltered air. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media iltered air Side and bottom mounting flanges Operating Pressure 5 to 50 psig (0.3 to 0 bar) Ambient/Media: -0 to 75 (-3 to 80 ) onstruction Material Valve Body: ast Aluminum or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover.. ROSS ONTROLS. All Rights Reserved. Rev. 06/7/8

13 Pendant ontrol Pendant Series 3 Single 3-Way ROSS pendant control valves are a durable pneumatic solution that can be used anywhere manual control of devices is needed, such as an air hoist, air motor, or counterbalance cylinder. Ideal for use on or with material handling devices such as overhead cranes or air hoists, ROSS pendant control valves can withstand even the toughest environments Dual -Way Dual 3-Way Single 3/ The Single 3/ pendant control valve may be used anywhere that requires manual 3/ control, such as operating small single acting cylinders or pressurizing vacuum cups for quick release. Ideal for use on or with material handling devices. Spring-return rubber poppet internals provide dependable shifting, long life, and low cost. Dual / Ideal for use on or with material handling devices. Spring-return rubber poppet internals provide dependable shifting, long life, and low cost. Dual 3/ Ideal for use on or with material handling devices. Twin Pacer inserts ensure reliability, dirt tolerance, and easy maintenance. May be used as a pilot valve convertible to a dual / function. 6 Triple 3-Way Triple 3/ The Triple 3/ pendant control valve may be used anywhere that three independant manual outputs are needed. Provides remote pilot signals to pressure controlled valves. Three Pacer inserts ensure reliability and dirt tolerance. Model Description Pipe Valve Model Number* Dimensions inches (mm) - -3 A B Single 3-Way; one lever, no handle / 05A (0) 6.0 (70).8 (6).0 (0.5) Single 3-Way; one lever/handle / 3900A (0) 7. (8).8 (6).7 (0.8) Dual -Way High-low; two levers only / 05A (78).8 (7).8 (70).0 (0.5) Dual -Way High-low; two levers/handle / 3900A (78) 7. (8).8 (70).7 (0.8) Dual 3-Way; two levers only /8 05A (7).5 (6) 0.9 (0.) Dual 3-Way; two levers/handle /8 3900A (73) 7. (8).8 (70).6 (0.7) Triple 3-Way; three levers only / 05A (7).8 (7) 3.8 (97).6 (0.7) Triple 3-Way; three levers/handle / 3900A (7) 7. (8) 3.8 (97).3 (.0) * NPT port threads. A B Application Data Dual / - High-low Dual 3/ Air Hoist 3 Articulating Arm Bi-directional Air Motor Pilot for Larger Double Pressure ontrolled Valve To convert a Dual 3/ into a Dual /: Plug ports 3 and 5. onnect supply line to port. becomes the outlet and port becomes the exhaust port. STANDARD SPEIIATIONS (for valves on this page): onstruction Design low Media iltered air Line Operating Pressure 0 to 50 psig (0 to 0 bar) Ambient/Media: -0 to 75 (-0 to 80 ) onstruction Material Valve Body: Aluminum or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-0 ), consult ROSS. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 06/7/8.3

14 General Information Standard Specifications The standard specifications for the products on each page of this catalog are given on the same page or referenced. or solenoid pilot valves, models with internal pilot supply are listed. Most models are also available for use with external pilot supply or have a built-in pilot supply selector valve. The products in this catalog are intended for use in industrial pneumatic systems. Most products are adaptable to other uses and conditions not covered by the standard specifications given in this catalog. s shown are approximate and are subject to change. Dimensions given, unless otherwise noted, are envelope dimensions (not for mounting). onsult ROSS for further information. Threads s of valves and bases described in this catalog have NPT (ANSI B.) threads. Other thread types can be specified by putting an appropriate prefix letter on the model or part number when ordering. Thread Types by Model Prefix Letter Pneumatic Prefix Threaded Electrical Threads Letter Opening NPT (ANSI B.) None NPT ISO 8 - DIN 59 Parallel, BSPP # * ISO 8 - DIN 59 Parallel, BSPP # D G ISO 8 - JIS B003 Tapered # J ISO SAE 96- ISO 96 S NPT * Used only for filters, regulators, lubricators. # ISO 8 threads superseds BSPP, G and JIS thread types. low Ratings low ratings are expressed as where = corresponds to a steady state air flow of approximately 3 scfm under the following conditions: Inlet pressure = 00 psig (6.7 bar) Pressure drop = 0 psi (0.69 bar) Air temperature = 68 (0 ) Relative humidity = 36% Note: Because widely differing test standards are used to measure values, the figures given in this catalog should not be used to compare ROSS valves with those of other makers. The ratings given here are intended only for use with performance charts published by ROSS. The ratings are averages for the various flow paths through the valve and are for steady flow conditions. Approvals and ertifications ROSS products are designed to meet a number of industrial standards, including the anadian Standards Association (.S.A.) guidelines. or more information on specific product approvals, contact your local distributor or ROSS. Solenoids All ROSS standard solenoids are rated for continuous duty (unless noted otherwise) and will operate the valve within the air pressure range specified in this catalog. Explosion-Proof Solenoid Pilot available, for more information consult ROSS. Voltage & Hertz When ordering a solenoid valve, also specify the desired solenoid voltage and hertz. Voltage Types by Model Suffix Letter Voltage Suffix Letter 0 volts A Z 0 volts A Y volts D H volts D W 8 volts D M 90 volts D K 0 volts D P 5 volts D Recommended Solenoid Voltages: 00-0 volts A, 50 Hz; 00-0 volts A, 60 Hz; volts D; 0 volts D. In addition, the following voltages are available: 00, 0 volts A, 50 Hz 00, 0, 80 volts A, 60 Hz, 8, 0 volts A, 50 Hz 0 volts A, 60 Hz 00, 0 volts A, 50 Hz 00, 0 volts A, 60 Hz. or example: Model 773B500, 0 volts A, 60 Hz. Model W6076B0, 0 volts A, 50 Hz. or additional information or help with voltage configuration, please contact your local distributor or ROSS. Identification Valve symbols in this catalog conform to the ISO 9-:99 standard of the International Organization for Standardization (ISO) and the SAE J05 standard of the Society of Automotive Engineers (SAE) respectively. Information or Technical Assistance or additional information or application assistance concerning ROSS products, consult ROSS or your local ROSS distributor (see contact information on the back cover). Order Placement or order placement, consult ROSS or your local ROSS distributor. or a current list of countries and local distributors, visit ROSS website at 0 Rev. 0/07/7

15 AUTIONS, WARNINGS and STANDARD WARRANTY PRE-INSTALLATION or SERVIE. Before servicing a valve or other pneumatic component, be sure that all sources of energy are turned off, the entire pneumatic system is shut off and exhausted, and all power sources are locked out (ref: OSHA 90.7, EN 037).. All ROSS products, including service kits and parts, should be installed and/or serviced only by persons having training and experience with pneumatic equipment. Because any installation can be tampered with or need servicing after installation, persons responsible for the safety of others or the care of equipment must check every installation on a regular basis and perform all necessary maintenance. 3. All applicable instructions should be read and complied with before using any fluid power system in order to prevent harm to persons or equipment. In addition, overhauled or serviced valves must be functionally tested prior to installation and use. If you have any questions, call your nearest ROSS location listed on the cover of this document.. Each ROSS product should be used within its specification limits. In addition, use only ROSS parts to repair ROSS products. WARNING: ailure to follow these directions can adversely affect the performance of the product or result in the potential for human injury or damage to property. ILTRATION and LUBRIATION 5. Dirt, scale, moisture, etc. are present in virtually every air system. Although some valves are more tolerant of these contaminants than others, best performance will be realized if a filter is installed to clean the air supply, thus preventing contaminants from interfering with the proper performance of the equipment. ROSS recommends a filter with a 5-micron rating for normal applications. 6. All standard ROSS filters and lubricators with polycarbonate plastic bowls are designed for compressed air applications only. Do not fail to use the metal bowl guard, where provided, to minimize danger from high pressure fragmentation in the event of bowl failure. Do not expose these products to certain fluids, such as alcohol or liquefied petroleum gas, as they can cause bowls to rupture, creating a combustible condition, hazardous leakage, and the potential for human injury or damage to property. Immediately replace a crazed, cracked, or deteriorated bowl. When bowl gets dirty, replace it or wipe it with a clean dry cloth. 7. Only use lubricants which are compatible with materials used in the valves and other components in the system. Normally, compatible lubricants are petroleum based oils with oxidation inhibitors, an aniline point between 80 (8 ) and 0 (0 ), and an ISO 3, or lighter, viscosity. Avoid oils with phosphate type additives which can harm polyurethane components, potentially leading to valve failure which risks human injury, and/or damage to property. AVOID INTAKE/EXHAUST RESTRITION 8. Do not restrict the air flow in the supply line. To do so could reduce the pressure of the supply air below the minimum requirements for the valve and thereby cause erratic action. 9. Do not restrict a valve s exhaust port as this can adversely affect its operation. Exhaust silencers must be resistant to clogging and must have flow capacities at least as great as the exhaust capacities of the valves. ontamination of the silencer can result in reduced flow and increased back pressure. WARNING: ROSS expressly disclaims all warranties and responsibility for any unsatisfactory performance or injuries caused by the use of the wrong type, wrong size, or an inadequately maintained silencer installed with a ROSS product. POWER PRESSES 0. Mechanical power presses and other potentially hazardous machinery using a pneumatically controlled clutch and brake mechanism must use a press control double valve with a monitoring device. A double valve without a self-contained monitoring device should be used only in conjunction with a control system which assures monitoring of the valve. All double valve installations involving hazardous applications should incorporate a monitoring system which inhibits further operation of the valve and machine in the event of a failure within the valve mechanism. ENERGY ISOLATION/EMERGENY STOP. Per specifications and regulations, ROSS L-O-X and L-O-X with EEZ-ON operation products are defined as energy isolation devices, NOT AS EMERGENY STOP DEVIES. All products sold by ROSS ONTROLS are warranted for a one-year period [with the exception of all ilters, Regulators and Lubricators ( RLs ) which are STANDARD WARRANTY warranted for a period of seven years] from the date of purchase to be free of defects in material and workmanship. ROSS obligation under this warranty is limited to repair or replacement of the product or refund of the purchase price paid solely at the discretion of ROSS and provided such product is returned to ROSS freight prepaid and upon examination by ROSS is found to be defective. This warranty becomes void in the event that product has been subject to misuse, misapplication, improper maintenance, modification or tampering. THE WARRANTY EXPRESSED ABOVE IS IN LIEU O AND EXLUSIVE O ALL OTHER WARRANTIES AND ROSS EXPRESSLY DISLAIMS ALL OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED WITH RESPET TO MERHANTABILITY OR ITNESS OR A PARTIULAR PURPOSE. ROSS MAKES NO WARRANTY WITH RESPET TO ITS PRODUTS MEETING THE PROVISIONS O ANY GOVERNMENTAL OUPATIONAL SAETY AND/OR HEALTH LAWS OR REGULATIONS. IN NO EVENT IS ROSS LIABLE TO PURHASER, USER, THEIR EMPLOYEES OR OTHERS OR INIDENTAL OR ONSEQUENTIAL DAMAGES WHIH MAY RESULT ROM A BREAH O THE WARRANTY DESRIBED ABOVE OR THE USE OR MISUSE O THE PRODUTS. NO STATEMENT O ANY REPRESENTATIVE OR EMPLOYEE O ROSS MAY EXTEND THE LIABILITY O ROSS AS SET ORTH HEREIN. Rev. 0/07/7 www.

16 Americas U.S.A. ROSS ONTROLS ustomer Service -800-GET-ROSS (38-800) Technical Service -888-TEK-ROSS ( ) anada ROSS ANADA rosscanada.com ANADA IN. An Independent Representative Brazil ROSS SOUTH AMERIA Ltda Europe Germany ROSS EUROPA GmbH rosseuropa.com United Kingdom ROSS UK Ltd rossuk.co.uk rance ROSS RANE SAS rossfrance.com Asia & Pacific Japan ROSS ASIA K.K rossasia.co.jp India ROSS ONTROLS INDIA Pvt. Ltd hina ROSS ONTROLS (HINA) Ltd rosscontrolschina.com ull-service Global Locations There are ROSS Distributors Throughout the World To meet your requirements across the globe, ROSS distributors are located throughout the world. Through ROSS or its distributors, guidance is available for the selection of ROSS products, both for those using pneumatic components for the first time and those designing complex systems. Other literature is available for engineering, maintenance, and service requirements. If you need products or specifications not shown in this catalog, please visit ROSS' website, contact ROSS or your ROSS distributor. The ROSS Support Team will be happy to assist you in selecting the best product for your application. or a current list of countries and local distributors, visit ROSS at. U.S.A. - ontent subject to change. l 08, ROSS ONTROLS. All Rights Reserved. l orm ROSS-MMV0