CONTROLS MANUAL AND MECHANICAL VALVES

Transcription

1 ONTROLS MANUAL AND MEHANIAL VALVES

2 Pushbutton Palm Button Toggle Lever am Roller Plunger Hand Lever oot Pedal with Guard Pendant VALVE TYPE lush & Mushroom Pushbutton VALVE SERIES Palm Button & Heavy Duty Palm Button Selector Switch Toggle Lever Lever Hand Lever Pedal & Treadle oot Pedal with Guard Mechanical am Roller & Plunger Valves Pendant ontrol AVAILABLE PORT SIZES UNTIONS MAX. LOW v /8 / 3/8 / 3/ ¼ / 3/ / /3 5/ & Page RM &

3 lush & Mushroom Pushbutton Series 3-Way -Position Valves, lush Pushbutton, Spring Return Valve Model Number* Green Button Red Button V /8 3BPG 3BPR (0.3) / 3BPG 3BPR (0.5) 3 3-Way -Position Valves, Mushroom Button Spring Return Valve Model Number* Green Button Red Button V /8 3BMBG 3BMBR (0.3) / 3BMBG 3BMBR (0.6) 3 * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D3BPG lush Pushbutton.77 (5).6 (37).6 (3) / (99) 3-G 0.7 /.3 (8) /8 (8) 3.. (79) 0.93 (36) () Mushroom Button.77 (5) 0.58 (5) -o..38 (35).30 (33) 0.98 (5).37 (35) 0.70 (99) / () (8) 3-G (8) 3. / /8 (79) (36) () AESSORIES.6 (37).6 (3) 0.58 (5) -o (5).37 (35) VOD IOD (6) VOD IOD (6) ( O-Rings) x0.08 ()=0.3 (8) 0.8 () ( O-Rings) x0.08 ()=0.3 (8) 0.8 () 0.79 (0) 0.58 (5) 0.79 (0) 0.58 (5).77 (5).3 (7).77 (5).3 (7).6 (37).6 (3) 0.55 () 3-o 5..6 (37).6 (3). ().0 (6) 0.55 () 3-o 5..0 (6).38 (35).30 (33).8 (30).57 (0) VOD IOD 3.9 (99) (7).8 (30).57 (0) VOD IOD 3.9 (99) (7) ( O-Rings) x0.08 ()=0.3 (8) 3-G / ( O-Rings) x0.08 ()=0.3 (8) 3-G / 0.98 (5) 0.98 (5) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8) Silencers Thread Type Model Number Avg. Dimensions inches (mm) NPT Threads BSPT Threads V A B /8 Male 5500A003 D5500A ().0 (5) 0. (0.) / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. Normally losed or Normally Open simply by piping the inlet supply accordingly. B A onstruction: Spool & Sleeve. Mounting Type: Inline. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). Valve Body: Die-cast aluminum. Button Materials: Stainless steel, polyoxymethylene. STANDARD SPEIIATIONS (for valves on this page): Spool Material: Aluminum. Seals Material: Nitrile rubber. Spring Material: Stainless Steel. Switch Parts: Glass filled Nylon. Valid Operation Distance: 0. inches (5.5 mm). Invalid Operation Distance: 0.0 inches (.0 mm). Pressure for Valid/Invalid Operation: 7.7 lb (3.5 Kg). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.3

4 Palm Button & Palm Button - -Way -Position Valves, Palm Button, Spring Return Valve Model Number* V Average Response onstants# - / A (0.5) 3-Way -Position Valves, Palm Button, Spring Return / Normally losed 3/ Normally losed & Series Average Response onstants# lb Valve Model Number*,, 3 V (kg) - -3 / 3A (0.5) 3 Palm Button -Way -Position Valves, Palm Button Spring Return Valve Model Number* Average Response onstants# Green Button Red Button V - / B00 B (0.8) 3-Way -Position Valves, Palm Button Spring Return Average Response onstants# Valve Model Number* V Green Button Red Button - -3 / 3B00 3B (0.8) * NPT port threads. or BSPP threads add a D prefix to the model number e.g., DA00. # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. / Normally losed 3/ Normally losed 3 Palm Button.8 (6) Palm Button 3.7 (83) (inlet).56 (0) 0.67 (7). 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70).7 (63) Palm Button 0.50 (3).86 (73) Travel 0.8 (5) (inlet) 0.3 (8).50 (6).5 (3) 0.8 (7) places.67 (68).33 (3) 0.75 (9).50 (38).50 (38) 3.00 (76) AESSORIES & OPTIONS Silencers for 3-way Valves Thread Type Model Number Avg. V Dimensions inches (mm) NPT Threads BSPT Threads A B / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. B A RING GUARD for Palm Button Model Number 78B30.75 ().50 (6) Helps to protect against accidental valve actuation. STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Side and bottom mounting flanges. Ambient/Media Temperature: -0 to 75 (-3 to 80 ). or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). Valve Body: Die-cast aluminum. Button Materials: Pushbutton: Aluminum. Palm Button: High-strength plastic. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover.. 07, ROSS ONTROLS. All Rights Reserved. Rev. 0/0/7

5 Selector Switch Series 3-Way -Position Valves, Detented Valve Model Number* V - Black Switch Knob - /8 3BSLB (0.) / 3BSLB (0.7) 3 * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D3BSLB. /8.77 (5) ().6 (8) 0.58 (5) -o (8) 0.98 (5).37 (35) VOD IOD 3.9 (99). (36) 0.3 (6) ( O-Rings) x0.08 ()=0.3 (8) 3-G/8 0.8 () 0.79 (0) 0.7 (8) 3. (79) 0.58 (5) (7) ON 0.8 ().6 (37) 90.6 (3) O /.77 (5).3 (7).6 (8) 0.55 () 3-o 5..0 (6).8 (30).57 (0) VOD IOD (7) 3.9 (99) ( O-Rings) x0.08 ()=0.3 (8) 3-G/ 0.98 (5) 0.79 (0) 0.77 (0) 3. (79) 0.7 (8) (7) ON 0.8 ().6 (37) 90.6 (3) O Normally losed or Normally Open simply by piping the inlet supply accordingly. AESSORIES Silencers Thread Type Model Number Avg. V Dimensions inches (mm) NPT Threads BSPT Threads A B /8 Male 5500A003 D5500A ().0 (5) 0. (0.) / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. B A onstruction: Spool & Sleeve. Mounting Type: Inline. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). Valve Body: Die-cast aluminum. Button Materials: Stainless steel, polyoxymethylene. STANDARD SPEIIATIONS (for valves on this page): Spool Material: Aluminum. Seals Material: Nitrile rubber. Spring Material: Stainless Steel. Switch Parts: Glass filled Nylon. Valid Operation Distance: 0. inches (5.5 mm). Invalid Operation Distance: 0.0 inches (.0 mm). Pressure for Valid/Invalid Operation: 7.7 lb (3.5 Kg). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.5

6 Toggle Lever Series -Way -Position Valves, Spring Return Valve Model Number* V Average Response onstants# - / A (0.5) * NPT port threads. or BSPP threads add a D prefix to the model number e.g., DA00. 3-Way -Position Valves, Spring Return Average Response onstants# Valve Model Number* V - -3 / 3A (0.5) 3 * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D3A00. # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications..8 (6) 5.9 (50) (inlet) (7) (0). 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70) AESSORIES Silencers for 3-way Valves Thread Type Model Number Avg. V Dimensions inches (mm) NPT Threads BSPT Threads A B / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. B A STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Side and bottom mounting flanges. Ambient/Media Temperature: -0 to 75 (-3 to 80 ). or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). Valve Body: Die-cast aluminum. Lever Knob Material: Glass filled Nylon. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..6 07, ROSS ONTROLS. All Rights Reserved. Rev. 0/0/7

7 Lever 36 Series Operators 3-Way -Position Valves, Detented or Spring Return Valve Model Number* V Average Response onstants# - -3 / Detented 363A (0.6) / Spring Return 363A (0.6) 3 Detented 0 3 Spring Return Operators -Way -Position Valves, Detented or Spring Return Valve Model Number* V Average Response onstants# -, - -3, -3 / Detented 366A (.) / Spring Return 366A (.) Detented 3 Spring Return * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D363A003. # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3 3/ Valve 3 (exhaust).3 (9).73 () (inlet) 3.0 (8) Spring Return Model 3. (87).7 ().8 (7). (36) 0.8 (7) (5) (5) 3.8 (88) 0.50 (3) (7) 0.90 (3) 7.9 (83) / Valve 3.8 (97).56 (0) 0.7 (8) 7.87 (00). (6).88 () 3 (exhaust). (6). (3).85 (7) 3.65 (93) (inlet ).5 (57) 0.7 ().50 () places AESSORIES Silencers for 3-way Valves Thread Type Model Number Avg. V Dimensions inches (mm) NPT Threads BSPT Threads A B / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. B A or models with vertical handle, consult ROSS. STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Side and bottom mounting flanges. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.7

8 Hand Lever - Horizontal 3 Series -Way 3-Position Valves, Detented Average Response losed/open Valve Model V onstants#,, 3 enter Number* In-Out Out-Exh. In-Out Out-Exh. 3/8 / Open 36A (0.9) 3/8 / losed 36A (0.9) / 3/ Open 36A (.7) / 3/ losed 36A (.7) 3/ Open 36A (.3) 3/ losed 36A (.3) ¼ Open 36A (.5) ¼ losed 36A (.5) ¼ ½ Open 36A (5.0) ¼ ½ losed 36A (5.0) * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D36A Open enter 3 losed enter # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3/8 / 8.05 (0) (inlet) Ø 0.3 (8) [ places].7 (8) (inlet) Ø 0. () [ places].50 (38) 6.77 (7).0 () (9) (38).06 (5) 3.69 (9).38 (6).3 (0) (3) (5). (7) 3 (exhaust).0 (36) 5.53 (0) 9.00 (9) (5) (5).63 (57).75 () 3.06 (78) 5.63 (3) (7) (35).75 (70).38 (35) 3 (exhaust) 3/.8 (37) (inlet) Ø 0.7 () [ places] 8.63 (73) (inlet) Ø 0.56 () [ places].60 () 6.5 (57) (9) (57) 3.00 (76) 5.37 (36) 3.50 (89) 6.38 (6) (9)(38) 3.5 (83).6 () 3 (exhaust).00 (5) 7.9 (0) 3.50 (33) (38) (76) 3.75 (95) 6.8 (73).3 (0) 7.9 (0) (5) (5).3 (05).06 (53) 3 (exhaust) 8.75 (76) (inlet) Ø 0.56 () [ places] ¼.0 (30) 8.6 (08).0 (358) (38) (76) 3.9 (00) 7.3 (8).3 (0) 8.5 (0).5.3 (9) (57).75 ().38 (60) 3 (exhaust) STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Bottom mounting flanges. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..8 07, ROSS ONTROLS. All Rights Reserved. Rev. 0/0/7

9 Hand Lever - Vertical 3 Series -Way 3-Position Valves, Detented or Non-Detented losed/open Valve Model V enter Number*,, 3 In-Out Out-Exh. Average Response onstants# In-Out Out-Exh. 3/8 / Open 36A (.) 3/8 / Open 36A30# (.) 3/8 / losed 36A (.) 3/8 / losed 36A30# (.) / 3/ Open 36A (.) / 3/ Open 36A0# (.) / 3/ losed 36A (.) / 3/ losed 36A0# (.) # Non-detented models. * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D36A Open enter 3 losed enter # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications..3 (0) 0.8 (.73) (inlet) Ø 0.3 (8) [ places] (3) (5) (9) (38).06 (5) 3.69 (9).38 (6).3 (0) (7) 3 (exhaust) 5.63 (3) 3.5 (3) (inlet) Ø 0. () [ places] (7) (35).75 (70) (5) (5).63 (57).75 () 3.06 (78) 5.63 (3).38 (35) 3 (exhaust) STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Bottom mounting flanges. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.9

10 Pedal & Treadle 36 Series 3-Way -Position Valves, Pedal, Spring Return Average Response onstants# Valve Model Number* V - -3 / 363A (0.6) 3 Valve Model Number* -Way -Position Valves, Pedal, Spring Return V Average Response onstants# -, - -3, -3 / 366A ( Way -Position Valves, Treadle, Detented Average Response onstants# Valve Model Number* V - -3 / 363A (0.6) 3 0 -Way -Position Valves, Treadle, Detented Average Response onstants# Valve Model Number* V -, - -3, -3 / 366A (.3 3 * NPT port threads. or BSPP threads add a D prefix to the model number e.g., D363A00. # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. 3/ Pedal.55 (65).6 () 0. (3) 3.8 (88) 6.35 (6) (7) 0.50 (3).8 (7) (8) (87) 3 (exhaust).3 (9).73 () (inlet).00 (5) 0.8 (7) places / Pedal.87 (73) 0. (5) 7.9 (83). (6).88 () 0.7 (8) 3 (exhaust).38 (60) (inlet). (6). (3).5 (57).50 ().85 (7) 3.65 (93) 0.3 (8) dia. places.9 (8) 0.8 (0) 3/ Treadle 6.0 (5) 3.8 (88) 3. (87) (7) 0.50 (3) 3 (exhaust).8 (7).88 (8).3 (9).73 () (inlet).00 (5) 0.8 (7) places.8 (30) 6.50 (65). (6).88 () / Treadle.5 (6) 0.7 (8) 3 (exhaust).38 (60) (inlet). (6). (3).5 (57).50 ().85 (7) 3.65 (93) 0.3 (8) dia. places STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet design. Mounting Type: Line mounting. Ambient/Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 5 to 5 psig (0.3 to 8.5 bar). Note: The 3/ and / treadle valves are not designed to be used to actuate clutch/brake mechanisms on mechanical power presses. IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover..0 07, ROSS ONTROLS. All Rights Reserved. Rev. 0/0/7

11 oot Pedal with Guard Safeguarding RM Series 5-Way -Position Valves, Pedal Operators Valve Model Number* V / Non-locking foot pedal RM0-08G 0.5. (0.9) Locking foot pedal RM0-08LG 0.5. (0.9) 3 5 5/ Spring Return without Lock 3 5 5/ Detented with Lock * NPT port threads..65 () 5.3 (33).08 (53) 3. (87) 0.8 () 0.3 (6) 3-/ 5.39 (37) 0. (0.5) 5.3 (35).87 (73) 0.98 (5) 0.3 (6).6 () 3.3 (85) 3.89 (99) 0.3 (6) 0.9 ().98 (75.7) 6.69 (70) 7.78 (00) 9.6 (5) 0. (3) onvertible to a 3-Way function. Note: Designed to meet OSHA 90.7 Mechanical power presses, with protective guard to prevent accidental actuation. STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Line mounting. Ambient/Media Temperature: 3 to 0 (-5 to 60 ). Inlet Pressure: 0 to 0 psig (0 to 8. bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.

12 Mechanical am Valves am Roller & Plunger Series -Way -Position Valves, -Direction am Roller Valve Model Number* V / 3A (0.5) -Direction Roller 3-Way -Position Valves, -Direction am Roller Valve Model Number* V / 33A (0.5) 3 -Way -Position Valves, -Direction am Roller Valve Model Number* V / 3A (0.5) -Direction Roller 3-Way -Position Valves, -Direction am Roller Valve Model Number* V / 33A (0.5) 3 -Way -Position Valves, Plunger Valve Model Number* V / 3A (0.5) Plunger 3-Way -Position Valves, Plunger Valve Model Number* V / 33A (0.5) 3 * NPT port threads. or BSPP threads add a D prefix to the model number, e.g., D3A00. # Valve Response Time Response Time (msec) = M + ( V). This is the average time required to fill a volume V (cubic inches) to 90% of supply pressure or to exhaust it to 0% of supply pressure. values are given in the chart above. M values for manually operated valves depend on the speed of actuation, and may be taken as zero for most practical applications. Travel 0.0 to 0.9 (.5 to 7.) -Direction Roller.37 () AESSORIES Travel 0.05 to 0.0 (.3 to.5) -Direction Roller.50 () Travel 0.07 to 0.5 (.8 to 6.).8 (6) 3.38 (86).56 (0) (inlet) 0.67 (7) Plunger. 0.3 (8) dia. places.00 (5) 0.78 (0).00 (5).76 (70) Silencers for 3-way Valves Thread Type Model Number Avg. V Dimensions inches (mm) NPT Threads BSPT Threads A B / Male 5500A003 D5500A (). (55) 0. (0.) Pressure Range: 0 to 300 psig (0 to 0.7 bar) maximum. STANDARD SPEIIATIONS (for valves on this page): B A onstruction: Poppet. Mounting Type: Side and bottom mounting flanges. Ambient/Media Temperature: -0 to 75 (-3 to 80 ). or temperatures below 0 ( ) air must be free of water vapor to prevent formation of ice. or temperatures below -0 (-3 ), consult ROSS. Inlet Pressure: 5 to 50 psig (0.3 to 0 bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover.. 07, ROSS ONTROLS. All Rights Reserved. Rev. 0/0/7

13 Pendant ontrol Pendant Series 3 Single 3-Way ROSS pendant control valves are a durable pneumatic solution that can be used anywhere manual control of devices is needed, such as an air hoist, air motor, or counterbalance cylinder. Ideal for use on or with material handling devices such as overhead cranes or air hoists, ROSS pendant control valves can withstand even the toughest environments. 3 Dual -Way Single 3/ The Single 3/ pendant control valve may be used anywhere that requires manual 3/ control, such as operating small single acting cylinders or pressurizing vacuum cups for quick release. Ideal for use on or with material handling devices. Spring-return rubber poppet internals provide dependable shifting, long life, and low cost Dual 3-Way Triple 3-Way Dual / Ideal for use on or with material handling devices. Spring-return rubber poppet internals provide dependable shifting, long life, and low cost. Dual 3/ Ideal for use on or with material handling devices. Twin Pacer inserts ensure reliability, dirt tolerance, and easy maintenance. May be used as a pilot valve convertible to a dual / function. Triple 3/ The Triple 3/ pendant control valve may be used anywhere that three independant manual outputs are needed. Provides remote pilot signals to pressure controlled valves. Three Pacer inserts ensure reliability and dirt tolerance. 6 Model Description Pipe Valve Model Number* V Dimensions inches (mm) - -3 A B Single 3-Way; one lever, no handle / 05A (0) 6.0 (70).8 (6).0 (0.5) Single 3-Way; one lever/handle / 3900A (0) 7. (8).8 (6).7 (0.8) Dual -Way High-low; two levers only / 05A (78).8 (7).8 (70).0 (0.5) Dual -Way High-low; two levers/handle / 3900A (78) 7. (8).8 (70).7 (0.8) Dual 3-Way; two levers only /8 05A (7).5 (6) 0.9 (0.) Dual 3-Way; two levers/handle /8 3900A (73) 7. (8).8 (70).6 (0.7) Triple 3-Way; three levers only / 05A (7).8 (7) 3.8 (97).6 (0.7) Triple 3-Way; three levers/handle / 3900A (7) 7. (8) 3.8 (97).3 (.0) * NPT port threads. Application Data A B Dual / - High-low Dual 3/ Air Hoist 3 Articulating Arm Bi-directional Air Motor Pilot for Larger Double Pressure ontrolled Valve To convert a Dual 3/ into a Dual /: Plug ports 3 and 5. onnect supply line to port. becomes the outlet and port becomes the exhaust port. STANDARD SPEIIATIONS (for valves on this page): onstruction: Poppet. Mounting Type: Line mounting. Ambient Temperature: 0 to 0 ( to 50 ). Media Temperature: 0 to 75 ( to 80 ). Inlet Pressure: 0 to 50 psig (0 to 0 bar). IMPORTANT NOTE: Please read carefully and thoroughly all of the AUTIONS, WARNINGS on the inside back cover. Rev. 0/0/7.3

14 General Information Standard Specifications The standard specifications for the products on each page of this catalog are given on the same page or referenced. or solenoid pilot valves, models with internal pilot supply are listed. Most models are also available for use with external pilot supply or have a built-in pilot supply selector valve. The products in this catalog are intended for use in industrial pneumatic systems. Most products are adaptable to other uses and conditions not covered by the standard specifications given in this catalog. s shown are approximate and are subject to change. Dimensions given, unless otherwise noted, are envelope dimensions (not for mounting). onsult ROSS for further information. Threads s of valves and bases described in this catalog have NPT (ANSI B.) threads. Other thread types can be specified by putting an appropriate prefix letter on the model or part number when ordering. Thread Types by Model Prefix Letter Pneumatic Prefix Threaded Electrical Threads Letter Opening NPT (ANSI B.) None NPT ISO 8 - DIN 59 Parallel, BSPP # * ISO 8 - DIN 59 Parallel, BSPP # D G ISO 8 - JIS B003 Tapered # J ISO SAE 96- ISO 96 S NPT * Used only for filters, regulators, lubricators. # ISO 8 threads superseds BSPP, G and JIS thread types. low Ratings low ratings are expressed as V where V = corresponds to a steady state air flow of approximately 3 scfm under the following conditions: Inlet pressure = 00 psig (6.7 bar) Pressure drop = 0 psi (0.69 bar) Air temperature = 68 (0 ) Relative humidity = 36% Note: Because widely differing test standards are used to measure V values, the figures given in this catalog should not be used to compare ROSS valves with those of other makers. The V ratings given here are intended only for use with performance charts published by ROSS. The V ratings are averages for the various flow paths through the valve and are for steady flow conditions. Approvals and ertifications ROSS products are designed to meet a number of industrial standards, including the anadian Standards Association (.S.A.) guidelines. or more information on specific product approvals, contact your local distributor or ROSS. Solenoids All ROSS standard solenoids are rated for continuous duty (unless noted otherwise) and will operate the valve within the air pressure range specified in this catalog. Explosion-Proof Solenoid Pilot available, for more information consult ROSS. Voltage & Hertz When ordering a solenoid valve, also specify the desired solenoid voltage and hertz. Voltage Types by Model Suffix Letter Voltage Suffix Letter 0 volts A Z 0 volts A Y volts D H volts D W 8 volts D M 90 volts D K 0 volts D P 5 volts D Recommended Solenoid Voltages: 00-0 volts A, 50 Hz; 00-0 volts A, 60 Hz; volts D; 0 volts D. In addition, the following voltages are available: 00, 0 volts A, 50 Hz 00, 0, 80 volts A, 60 Hz, 8, 0 volts A, 50 Hz 0 volts A, 60 Hz 00, 0 volts A, 50 Hz 00, 0 volts A, 60 Hz. or example: Model 773B500, 0 volts A, 60 Hz. Model W6076B0, 0 volts A, 50 Hz. or additional information or help with voltage configuration, please contact your local distributor or ROSS. Identification Valve symbols in this catalog conform to the ISO 9-:99 standard of the International Organization for Standardization (ISO) and the SAE J05 standard of the Society of Automotive Engineers (SAE) respectively. Information or Technical Assistance or additional information or application assistance concerning ROSS products, consult ROSS or your local ROSS distributor (see contact information on the back cover). Order Placement or order placement, consult ROSS or your local ROSS distributor. or a current list of countries and local distributors, visit ROSS website at. 0 Rev. 0/07/7

15 AUTIONS, WARNINGS and STANDARD WARRANTY PRE-INSTALLATION or SERVIE. Before servicing a valve or other pneumatic component, be sure that all sources of energy are turned off, the entire pneumatic system is shut off and exhausted, and all power sources are locked out (ref: OSHA 90.7, EN 037).. All ROSS products, including service kits and parts, should be installed and/or serviced only by persons having training and experience with pneumatic equipment. Because any installation can be tampered with or need servicing after installation, persons responsible for the safety of others or the care of equipment must check every installation on a regular basis and perform all necessary maintenance. 3. All applicable instructions should be read and complied with before using any fluid power system in order to prevent harm to persons or equipment. In addition, overhauled or serviced valves must be functionally tested prior to installation and use. If you have any questions, call your nearest ROSS location listed on the cover of this document.. Each ROSS product should be used within its specification limits. In addition, use only ROSS parts to repair ROSS products. WARNING: ailure to follow these directions can adversely affect the performance of the product or result in the potential for human injury or damage to property. ILTRATION and LUBRIATION 5. Dirt, scale, moisture, etc. are present in virtually every air system. Although some valves are more tolerant of these contaminants than others, best performance will be realized if a filter is installed to clean the air supply, thus preventing contaminants from interfering with the proper performance of the equipment. ROSS recommends a filter with a 5-micron rating for normal applications. 6. All standard ROSS filters and lubricators with polycarbonate plastic bowls are designed for compressed air applications only. Do not fail to use the metal bowl guard, where provided, to minimize danger from high pressure fragmentation in the event of bowl failure. Do not expose these products to certain fluids, such as alcohol or liquefied petroleum gas, as they can cause bowls to rupture, creating a combustible condition, hazardous leakage, and the potential for human injury or damage to property. Immediately replace a crazed, cracked, or deteriorated bowl. When bowl gets dirty, replace it or wipe it with a clean dry cloth. 7. Only use lubricants which are compatible with materials used in the valves and other components in the system. Normally, compatible lubricants are petroleum based oils with oxidation inhibitors, an aniline point between 80 (8 ) and 0 (0 ), and an ISO 3, or lighter, viscosity. Avoid oils with phosphate type additives which can harm polyurethane components, potentially leading to valve failure which risks human injury, and/or damage to property. AVOID INTAKE/EXHAUST RESTRITION 8. Do not restrict the air flow in the supply line. To do so could reduce the pressure of the supply air below the minimum requirements for the valve and thereby cause erratic action. 9. Do not restrict a valve s exhaust port as this can adversely affect its operation. Exhaust silencers must be resistant to clogging and must have flow capacities at least as great as the exhaust capacities of the valves. ontamination of the silencer can result in reduced flow and increased back pressure. WARNING: ROSS expressly disclaims all warranties and responsibility for any unsatisfactory performance or injuries caused by the use of the wrong type, wrong size, or an inadequately maintained silencer installed with a ROSS product. POWER PRESSES 0. Mechanical power presses and other potentially hazardous machinery using a pneumatically controlled clutch and brake mechanism must use a press control double valve with a monitoring device. A double valve without a self-contained monitoring device should be used only in conjunction with a control system which assures monitoring of the valve. All double valve installations involving hazardous applications should incorporate a monitoring system which inhibits further operation of the valve and machine in the event of a failure within the valve mechanism. ENERGY ISOLATION/EMERGENY STOP. Per specifications and regulations, ROSS L-O-X and L-O-X with EEZ-ON operation products are defined as energy isolation devices, NOT AS EMERGENY STOP DEVIES. All products sold by ROSS ONTROLS are warranted for a one-year period [with the exception of all ilters, Regulators and Lubricators ( RLs ) which are STANDARD WARRANTY warranted for a period of seven years] from the date of purchase to be free of defects in material and workmanship. ROSS obligation under this warranty is limited to repair or replacement of the product or refund of the purchase price paid solely at the discretion of ROSS and provided such product is returned to ROSS freight prepaid and upon examination by ROSS is found to be defective. This warranty becomes void in the event that product has been subject to misuse, misapplication, improper maintenance, modification or tampering. THE WARRANTY EXPRESSED ABOVE IS IN LIEU O AND EXLUSIVE O ALL OTHER WARRANTIES AND ROSS EXPRESSLY DISLAIMS ALL OTHER WARRANTIES EITHER EXPRESSED OR IMPLIED WITH RESPET TO MERHANTABILITY OR ITNESS OR A PARTIULAR PURPOSE. ROSS MAKES NO WARRANTY WITH RESPET TO ITS PRODUTS MEETING THE PROVISIONS O ANY GOVERNMENTAL OUPATIONAL SAETY AND/OR HEALTH LAWS OR REGULATIONS. IN NO EVENT IS ROSS LIABLE TO PURHASER, USER, THEIR EMPLOYEES OR OTHERS OR INIDENTAL OR ONSEQUENTIAL DAMAGES WHIH MAY RESULT ROM A BREAH O THE WARRANTY DESRIBED ABOVE OR THE USE OR MISUSE O THE PRODUTS. NO STATEMENT O ANY REPRESENTATIVE OR EMPLOYEE O ROSS MAY EXTEND THE LIABILITY O ROSS AS SET ORTH HEREIN. Rev. 0/07/7

16 ROSS ONTROLS U.S.A. Tel: ustomer Svs GET-ROSS ( ) Technical Svs TEK-ROSS ( ) ROSS EUROPA GmbH Germany Tel: ROSS ASIA K.K. Japan Tel: ROSS UK Ltd. United Kingdom Tel: ROSS ONTROLS INDIA Pvt. Ltd. India Tel: ROSS SOUTH AMERIA Ltda. Brazil Tel: ROSS RANE SAS rance Tel: ROSS ONTROLS (HINA) Ltd. hina Tel: ROSS ANADA anada Tel: ANADA IN. An Independent Representative ull-service Global Locations There are ROSS Distributors Throughout the World To meet your requirements across the globe, ROSS distributors are located throughout the world. Through ROSS or its distributors, guidance is available for the selection of ROSS products, both for those using pneumatic components for the first time and those designing complex pneumatic systems. Other literature is available for engineering, maintenance, and service requirements. If you need products or specifications not shown here, please contact ROSS or your ROSS distributor. They will be happy to assist you in selecting the best product for your application. or a current list of countries and local distributors, visit ROSS website at. U.S.A. - ontent subject to change. Online version only. 07, ROSS ONTROLS. All Rights Reserved. orm ROSS-MMV0