Solenoid valves for gas VAS, Double solenoid valves VCS

Transcription

1 Solenoid valves for gas VAS, Double solenoid valves VCS Product brochure GB Edition Safety shut-off of gaseous fuels, a further development of the solenoid valves for gas VG and VS Suitable for a max. inlet pressure of 500 mbar (500 hpa/7 psig) Easy installation into a system Compact design saves space No extra valve required owing to integrated low adjustment Check indication by blue LED Position indicator with integral visual indicator Suitable for high-duty cycling Higher low rates with the same nominal size EC type-tested and certiied FM, CSA, UL and AGA approved (230 V AC, 120 V AC, 24 V DC)

2 2 VAS, VCS Edition VAS..R quick opening VCS..R with damping unit Application Solenoid valves for gas VAS and double solenoid valves VCS for safeguarding and controlling the air and gas supply to gas burners and gas appliances. For use in gas control and safety systems in all sectors of the iron, steel, glass and ceramics industries, also in commercial heat generation, such as the packaging, paper and foodstuffs industries. VAS..F quick opening VCS..F with position indicator and pressure switch The modular design principle allows the individual components of the VAS, VCS Series to be easily assembled: e.g. quick opening, slow opening, with position indicator and visual indicator, slow opening with attached pressure switch. Ceramics industry Aluminium industry: curing oven for wheel rims Foodstuffs industry: baking oven

3 VAS, VCS Edition Examples of application VAS 1 3 Damping unit with low adjustment Plug with socket Plug Position indicator VCS 1 3 Solenoid valve for gas VAS 1 3, Double solenoid valve VCS 1 3 Threaded lange for pipe connections from DN 10 to 65, langed connection for sizes 2 and 3 for pipe connections DN 40 and 50. Modularly conigurable with: Damping unit Position indicator Plug (with or without socket) Pressure test points Pressure switch DG..C for inlet and/or outlet pressure Tightness control TC Bypass/pilot gas valve Attachment block for the connection of a pressure gauge, for example. Pressure test points Pressure switch DG..C Tightness control TC Bypass/pilot gasvalve VBY for size 1 Attachment block Bypass/pilot gas valve VAS for pressure gauge DG..C VAS..N DG..C Gas solenoid valve with inlet and outlet pressure switch VAS..N, quick opening, pressure switch DG..C for inlet pressure p e and outlet pressure p a 2. Double solenoid valve VCS with damping unit VCS..NL, 1st valve: quick opening, quick closing, with low adjustment, 2nd valve: slow opening, quick closing. VCS..NL 1.

4 4 VAS, VCS Edition Damping unit for VAS/VCS 6 8 Solenoid valve for gas VAS 6 9, Double solenoid valve VCS 6 9 Gas solenoid valve and double solenoid valve with flanged connection (ISO or ANSI) for pipe connections from DN 65 to 125. VAS 6 9 Plug with socket Position indicator Pressure test points Plug VCS 6 9 Modularly conigurable with: Damping unit for VAS/VCS 6 8 Position indicator Plug Plug with socket VCS 6 9 with two threaded connections for: Screw plugs Pressure test points Pressure switch DG..C for inlet/interspace pressure Tightness control TC Screw plugs Pressure switch DG..C Tightness - control TC VAS 6 9 VCS 6 9 Plug with socket Plug Pressure test points Measuring adapter Position indicator Damping unit for VAS/VCS 6 8 Screw plugs Pressure switch DG..C Bypass adapter Tightness control TC Relief line adapter 11 2 NPT, Rp 1 Solenoid valve for gas VAS 6 9, Double solenoid valve VCS 6 9 with connection for adapter plates Gas solenoid valve and double solenoid valve with langed connection (ISO or ANSI) for pipe connections from DN 65 to 125. Modularly conigurable with: Damping unit for VAS/VCS 6 8 Position indicator Plug Plug with socket With adapter plates, expandable with: Pressure switch DG..C VAS 6 9: for inlet/outlet pressure VCS 6 9: for interspace/outlet pressure Pressure test points Screw plug Bypass or pilot gas valve VAS VCS 6 9 With two threaded connections for: Screw plugs Pressure test points Pressure switch DG..C for inlet/interspace pressure Tightness control TC Expandable with relief line adapter (1½ NPT, Rp 1) for relief line. Pressure switch DG..C Bypass/ pilot gas valve VAS

5 VAS, VCS Edition VAS..F..N Gas solenoid valve with pilot gas valve and pressure switch VAS..F..N: quick opening, quick closing, VAS 1 as pilot gas valve with pressure switch DG..C. VAS 1 DG..C VCS..F..N Double solenoid valve with tightness control VCS..F..N: quick opening, quick closing valves, tightness control TC 116V. TC 116V

6 6 VAS, VCS Edition Replacement possibilities Solenoid valve for gas VG is to be replaced by VAS Type VG Solenoid valve for gas Solenoid valve for gas VAS 10/15 DN 10 internal 15 mm (0.59") Size 1 DN DN 15 Size 1 DN /12 DN 15 internal 12 mm (0.47") 20 DN 20 Size 1 DN DN 25 Size 1 DN /15 DN 25 internal 15 mm (0.59") 40/32 DN 40 internal 32 mm (1.26") Size 2 DN DN 40 Size 2 DN /33 DN 40 internal 33 mm (1.30") 50 DN 50 Size 3 DN /39 DN 50 internal 39 mm (1.54") 50/65 DN 50 internal 65 mm (2.59") Size 3 DN DN 65 Size 3 DN Size 6 DN /49 DN 65 internal 49 mm (1.93") 80 DN 80 Size 7 DN DN 100 Size 8 DN T T-product T-product T R Rp internal thread Rp internal thread R N NPT internal thread NPT internal thread N F ISO l ange ISO l ange F A ANSI l ange ANSI l ange A 02 p e max.: 200 mbar (200 hpa/2 psig) p e max.: 500 mbar (500 hpa/7 psig) mbar (360 hpa/5 psig) 500 mbar (500 hpa/7 psig) mbar (1000 hpa/14.5 psig) mbar (1800 hpa/26.1 psig) N Quick opening Quick opening /N L Slow opening Slow opening /L K Mains voltage: 24 V DC Mains voltage: 24 V DC K 100 V AC P Q 120 V AC 120 V AC Q 200 V AC Y T 220/240 V AC 230 V AC W 3 Electrical connection via terminals Electrical connection via terminals 3 6 Electrical connection via socket Electrical connection via socket 9 Metal terminal connection box Electrical connection via terminals 3 1 Screw plug at the inlet Screw plug at the inlet and outlet 3 Screw plug at the inlet and outlet Screw plug at the inlet and outlet 4 Pressure test point at the inlet Pressure test point at the inlet and outlet* 6 Pressure test point at the inlet and outlet Pressure test point at the inlet and outlet* D Flow adjustment Flow adjustment*** S Position indicator Position indicator with visual indicator** S G Position indicator for 24 V Position indicator for 24 V with visual indicator** G OCS Valve stem overtravel switch Position indicator with visual indicator** S CPS Position indicator Position indicator with visual indicator** S VI Visual indicator Position indicator with visual indicator** S M Suitable for biologically produced methane Suitable for biologically produced methane V Viton valve disc seal Viton valve disc seal Example VG 25R02NT31DM Type Example VAS 125R/NW = standard, available For length compensation when replacing VG by VAS 6 9 install an adapter for length compensation see Accessories, Adapter for length compensation. * Pressure test points may be attached at the left and/or right-hand side. ** Position indicator with visual indicator can be attached at the left- or right-hand side. *** Flow adjustment for VAS/VCL..N 1-3, VAS/VCL 1 2..L.

7 VAS, VCS Edition MODULINE solenoid valves for gas VS is to be replaced by VAS Type Flange Type VS Solenoid valve for gas Solenoid valve for gas VAS /8" Size Size 125 Size 1, DN ½" Size 115 Size 125 Size 1, DN ¾" Size 115 Size 125 Size 1, DN " Size 115 Size 125 Size 1, DN " Size 232 Size 240 Size 2, DN ½" Size 232 Size 240 Size 2, DN ½" Size 350 Size 3, DN " Size 350 Size 3, DN ML MODULINE + connection l anges Rp internal thread Rp internal thread R TML MODULINE + connection l anges NPT internal thread NPT internal thread N 02 p e max. 200 mbar (200 hpa/2 psig) p e max. 500 mbar (500 hpa/7 psig) 03 p e max. 360 mbar (360 hpa/3 psig) p e max. 500 mbar (500 hpa/7 psig) N Quick opening Quick opening /N L Slow opening Slow opening /L D Flow adjustment Flow adjustment* K Mains voltage: 24 V DC Mains voltage: 24 V DC K 100 V AC P Q 120 V AC 120 V AC Q 200 V AC Y T 220/240 V AC 230 V AC W 3 Electrical connection via terminals Electrical connection via terminals 3 6 Electrical connection via socket Electrical connection via socket 9 Metal terminal connection box Electrical connection via terminals 3 Pressure test point at the inlet Pressure test point at the inlet and outlet S Position indicator Position indicator S G Position indicator for 24 V Position indicator for 24 V G M non-ferrous metals non-ferrous metals V Viton valve disc seal Example VS 240ML02LT3 with Rp 1½ connection l anges * Flow adjustment for VAS/VCL..N 1-3, VAS/VCL 1 2..L. = standard, available Example VAS 240R/LW with test points

8

9

10 10 VAS, VCS Edition Selection table VCS 1 3 Accessories right 1. valve 2) Accessories left 2. valve 2) M20-cable gland Type T R N F N L N L K P Q Y W S 1) G 1) R 1) L 1) VCS 1 VCS 1-0 VCS 110 VCS 115 VCS 120 VCS 125 VCS 2 VCS 225 VCS 232 VCS 240 VCS 250 VCS 3 VCS 340 VCS 350 VCS 365 = standard, = available 1) Position indicator and bypass/pilot gas valve cannot be i tted together on the same side. 2) The same accessories can be selected for the left- or right-hand side. 3) Specify the test point for inlet pressure p e, interspace pressure p z or outlet pressure p a. When attaching DG..VC for p z, the installation space left at the other valve is only sufi cient for screw plugs. Plug with socket Plug without socket Screw plug Pressure test point DG 17VC 3) DG 40VC 3) DG 110VC 3) DG 300VC 2) Bypass valve VBY Bypass valve VAS 1 Screw plug Pressure test point DG 17VC 3) DG 40VC 3) Order example VAS 225RNNW Fitted pressure switch for test point p e DG 110VC 3) DG 300VC 3) Bypass valve VBY Bypass valve VAS 1 Type code VCS 1 3 Code Description VCS Gas solenoid valve 1 3 Size T T product no inlet- and no outlet l ange blind l ange Nominal inlet and outlet diameter R N F N L N L K P Q Y W S G R L Rp internal thread NPT internal thread ISO l ange 1. valve quick opening, quick closing 1. valve slow opening, quick closing 2. valve quick opening, quick closing 2. valve slow opening, quick closing Mains voltage 24 V DC Mains voltage 100 V AC; 50/60 Hz Mains voltage 120 V AC; 50/60 Hz Mains voltage 200 V AC; 50/60 Hz Mains voltage 230 V AC; 50/60 Hz Position indicator with visual indicator Position indicator for 24 V with visual indicator Viewed from the right (in the direction of l ow) Viewed from the left (in the direction of l ow)

11 VAS, VCS Edition Selction table VCS 6 9 Plug with socked Plug without socked Accessories right 1) Inlet Interspace 1 Interspace 2 Outlet Type T F A 05 N L N L K Q W A S G R L 3 P M /P /M /1 /2 /3 /4 P M P M B Z V E - P M VCS 665 VCS 780 VCS 8100 VCS 9125 = standard, = available 1) The accessories on the left-hand side, have the same type code as the accessories on the right hand side. Order example VAS 665F05NLW3P/2B-/PPPP Type code VCS 6 9 Code Description VCS Gas solenoid valve 6 9 Size T T product Nominal inlet diameter F ISO l ange A ANSI l ange 05 Max. inlet pressure p e max. 500 mbar (500 hpa/7 psig) N 1. valve quick opening, quick closing L 1. valve slow opening, quick closing N 2. valve quick opening, quick closing L 2. valve slow opening, quick closing K Mains voltage 24 V DC Q Mains voltage 120 V~; 50/60 Hz W Mains voltage 230 V~; 50/60 Hz A Mains voltage V~; 50/60 Hz S Position indicator with visual indicator G Position indicator for 24 V with visual indicator R Viewed from the right (in the direction of l ow) L Viewed from the left (in the direction of l ow) 3 Electrical connection: M20 cable gland P 2 screw plugs at the inlet and outlet M 2 pressure test points at the inlet ans outlet Code /P /M /1 /2 /3 /4 P M P M B Z V E - P M Description Accessories, right, inlet Screw plug Pressure test point for inlet pressure p e Gas pressure switch DG 17VC Gas pressure switch DG 40VC Gas pressure switch DG 110VC Gas pressure switch DG 300VC Accessories, left, interspace 1 Screw plug Test point for interspace pressure p z Gas pressure switch DG 17VC Gas pressure switch DG 40VC Gas pressure switch DG 110VC Gas pressure switch DG 300VC Accessories, right, interspace 2 Screw plug Test point for interspace pressure p z Gas pressure switch DG 17VC Gas pressure switch DG 40VC Gas pressure switch DG 110VC Gas pressure switch DG 300VC Bypass valve VAS 1, i tted Pilot gas valve VAS 1, i tted Prepared for breather line 1½ NPT Prepared for breather line Rp 1 none accessories Accessories, left, outlet Screw plug Pressure test point for inlet pressure p a Gas pressure switch DG 17VC Gas pressure switch DG 40VC Gas pressure switch DG 110VC Gas pressure switch DG 300VC none accessories 1) The accessories on the left-hand side, have the same type code as the accessories on the right hand side.

12 VAS, VCS Edition Technical data Types of gas: Natural gas, LPG (gaseous), biologically produced methane (max. 0.1 %-by-vol. H 2 S) or air; other gases on request. The gas must be dry in all temperature conditions and must not condense. Max. inlet pressure p e : 500 mbar (500 hpa/7 psig). FM approved (230 V AC, 120 V AC, 24 V DC), non operational pressure: 700 mbar (700 hpa/10 psig). CSA approved (230 V AC, 120 V AC, 24 V DC): 350 mbar (350 hpa/5 psig). Flow adjustment limits the maximum low volume between 20 and 100%. On VAS 1 3, the setting can be monitored on an indicator. Adjustment of the start gas rate: 0 to 70%. Opening times: VAS../N quick opening: 1 s; VAS../L slow opening: up to 30 s. Closing time: VAS../N, VAS../L quick closing: < 1 s. Ambient temperature: -20 to +60 C (-4 to +140 F), no condensation permitted. Storage temperature: -20 to +40 C (-4 to +104 F), no condensation permitted. Safety valve: Class A Group 2 pursuant to EN and EN 161, Factory Mutual (FM) Research Class (230 V AC, 120 V AC, 24 V DC): 7410 and 7411, ANSI Z21.21 and CSA 6.5, ANSI Z21.21 and CSA 6.5. Mains voltage: 230 V AC, +10/-15%, 50/60 Hz; 200 V AC, +10/-15%, 50/60 Hz; 120 V AC, +10/-15%, 50/60 Hz; 100 V AC, +10/-15%, 50/60 Hz; 24 V DC, ±20 %; VAS/VCS 9: V~, +10/-15 %, 50/60 Hz. Cable gland: M20 x 1.5 Electrical connection: max. 2.5 mm 2 (AWG 12) or plug with socket to EN Power consumption: Type 24 V DC [W] 100 V AC [W] 120 V AC [W] 200 V AC [W] 230 V AC [W] VAS VAS VAS VAS VAS VAS VAS (15*) 200 (15*) VCS VCS VCS VCS VCS VCS VCS (30*) 400 (30*) Enclosure: IP 65. Duty cycle: 100%. Power factor of the solenoid coil: cos ϕ = 1. Switching frequency: VAS..N: Arbitrary, VAS..L: There must be a period of 20 seconds between switching off and on again so that the damping is fully effective. Valve housing: Aluminium, Valve seal: NBR. Connection langes: VAS/VCS 1-3 with internal thread: Rp pursuant to ISO 7-1, NPT pursuant to ANSI/ASME VAS/VCS 6-9 with ISO lange pursuant to ISO 7005, with ANSI lange pursuant to ASA. Position indicator contact rating: Type VAS..S, VCS..S VAS..G, VCS..G Voltage V AC, 50/60 Hz V AC, 50/60 Hz Min. current (resistive load) Max. current (resistive load) 100 ma 3 A 2 ma 0.1 A Position indicator switching frequency: max. 5 per minute. Switching Switching cycles* current [A] cos ϕ = 1 cos ϕ = , , , , , , ,000 * Limited to max. 200,000 cycles for heating systems. VAS/VCS 9 Switching frequency: max. 1 per minute. Max. temperature of solenoid coil: +20 C (+68 F) above ambient temperature. Current consumption at 20 C (68 F): Pick-up current: 1.8 A Holding current: 0.3 A. * After opening.