Graphical Symbols for Automotive Fire Apparatus

Transcription

1 s for Automotive TC008:2018 s for Automotive Prepared by the FAMA Technical Committee This guide does not endorse any manufacturer or product Page 1 of 60 Manufacturers Association TC008 - s docx

2 s for Automotive Contents 1 - Scope Documents Definitions General Color Adaptation of s as Digital Display Icons Rules Base s General Discharges and Intakes Tanks Fire Suppression Pump Functions and Features Hose Aerial Device Stabilizers Electrical Lighting Foam and CAFS Revisions Page 2 of 60 Manufacturers Association TC008 - s docx

3 s for Automotive 1 - Scope This document presents graphical symbols for use on operator controls and other displays on fire and rescue apparatus. These symbols are appropriate for vehicles designed to meet NFPA 1901 for Automotive, NFPA 1906 for Wildland Apparatus, and NFPA 414 for Airport Rescue and Fire Fighting Vehicles. This document gives the fire and rescue community an option for labeling common controls with a graphical representation of their function. This can be either in place of, or in addition to, the traditional text description. Some symbols have been adopted from already established sources, and many of the symbols are identical or similar to those being developed for use in Europe. 2 Documents The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply. SAE J1362 ISO 7000 ISO s for Operator Controls and Displays on Off-Road Self- Propelled Work Machines symbols for use on equipment Index and synopsis Cranes symbols Part 2: s for mobile cranes ISO Basic principles for graphical symbols for use on equipment Part 2: Form and use of arrows ISO Basic principles for graphical symbols for use on equipment Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons) ISO 8999 CEN IEC Reciprocating internal combustion engines -- symbols Fire Fighting Vehicles and Equipment s for Operator Controls and Other Displays symbols for use on equipment Page 3 of 60 Manufacturers Association TC008 - s docx

4 s for Automotive IEC Basic principles for graphical symbols for use on equipment Part 1: Creation of symbol originals IEC Basic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical symbols NFPA 1901 NFPA 1906 NFPA 414 for Automotive for Wildland for Airport Rescue and Fire Fighting Vehicles. 3 - Definitions 4 - General A visually perceptible figure used to transmit information independent of language. It may be produced by drawing, printing, or other means. 1. New symbol ideas should be forwarded to FAMA. The FAMA s group will consider new symbols at each FAMA technical committee meeting and add new symbols as appropriate. 2. Use symbols as shown in this document. However, symbols which are shown in outline form may be filled in actual use for enhanced clarity of reproduction and improved visual perception by the operator, unless otherwise noted for individual symbols. Refer to IEC Limitations inherent in some reproduction and display technologies may require increased line thickness or other minor modifications of symbols. Such modifications are acceptable provided the symbol is unchanged in its basic graphical elements and remains easily discernible by the operator. 4. To improve the appearance and perceptibility of a graphical symbol, or to coordinate with the design of the equipment to which the symbol is applied, it may be necessary to change the line thickness or round the corners of a symbol. The graphic designer is free to make such changes, provided that the essential perceptual characteristics of the symbol are maintained. Page 4 of 60 Manufacturers Association TC008 - s docx

5 s for Automotive 5. For actual use, all symbols shall be reproduced large enough to be easily discernible by the operator. See IEC for guidelines on the proper sizing of symbols. s grouped together in a display or on a set of controls should be scaled to the same degree relative to the corner marks of the original symbol as shown in this in this document in order to maintain the correct visual relationship among the symbols. s shall be used in the orientation shown in unless otherwise noted for individual symbols. 6. Most symbols are constructed using a building block approach in which various symbols and symbol elements are combined in a logical manner to produce new symbols. 7. s are generally intended to replace a word or words with a graphical representation that has the same meaning for all operators, regardless of their native language. However, the use of a graphical symbol to identify a control or display does not preclude the use of words in conjunction with that control or display. 8. s on controls and displays shall have good contrast to their background. Displays may use either a light symbol on a dark background or a dark symbol on a light background, depending upon which alternative provides the best visual perception. When a symbol image is reversed (for example, from black-on-white to white-on-black and vice versa), it shall be done for the entire symbol. 9. s shall be located on or adjacent to the control or display that is being identified. Where more than one symbol is required for a control, the symbols shall be located in relation to the control such that movement of the control toward the symbol shall effect the function depicted by that symbol. 10. numbers and the standards they come from are provided for each symbol not unique to this document. This list is not exhaustive. Certain symbols may be found in more than one standard, or in standards not referenced here. 11. s are shown within the outer limits of a 24 mm square grid (32 percent of original ISO graphics grid size). Corner marks delimit the corners of the 75 mm square graphics grid from IEC Corner marks are not part of the symbol itself Page 5 of 60 Manufacturers Association TC008 - s docx

6 s for Automotive 5 - Color 1. When used to indicate operating status or condition, the following colors have meaning as follows: Red Yellow Green The color red shall denote a failure, serious malfunction, or dangerous operating condition that requires immediate attention. The color yellow or amber denotes a condition outside normal operating limits or approaching a dangerous operating condition. The color green or denotes a normal operating condition. 2. Color coding should not be used to provide any unique information since 7 percent of the male population is color blind. Use colors to assist if desired but the operator should not need to rely on the colors for essential information. 3. The following color chart may be used to produce standard safety colors: HTML Process Color srgb Color Pantone Code C M Y K R G B Blue 2945C F Green 3415C A4D Orange 152C E17000 Red 485C D52B1E White FFFFFF Yellow 109C FED Adaptation of s as Digital Display Icons s may be adapted for use as digital display icons on reconfigurable or other electronic displays. Such adaptations should follow the principles of ISO Special care should be taken to ensure that digital display icons preserve the visual impression of the symbol from which the icon is adapted Page 6 of 60 Manufacturers Association TC008 - s docx

7 s for Automotive 7 - Rules 1. ing Discharges all driver side discharges beginning at the exact center of the apparatus front bumper using odd numbers going CCW around the driver side and ending before the center of the rear bumper all passenger side discharges beginning just past the center of the apparatus front bumper using even numbers going CW around the passenger side and ending at the exact center of the rear bumper 2. ing Intakes all driver side intakes beginning at the exact center of the apparatus front bumper using odd numbers going CCW around the driver side and ending before the center of the rear bumper all passenger side intakes beginning just past the center of the apparatus front bumper using even numbers going CW around the passenger side and ending at the exact center of the rear bumper 3. ing Scene Light Switches For instances when there are multiple lights of the same description, number driver side lights beginning at the front of the apparatus using odd numbers. Use even numbers on the passenger side. 4. ing Electrical Outlets each electrical outlet circuit. each circuit at the circuit breaker or fuse panel. This can be accomplished by directly labeling the fuse or breaker, or by providing a diagram. Use the Electrical Outlet symbol to label each outlet or cord reel with the number of its corresponding circuit, the circuit voltage, and the circuit amperage. Each circuit may have more than one outlet, so there may be several outlets with identical labels. Page 7 of 60 Manufacturers Association TC008 - s docx

8 s for Automotive 5. s with Multiple uses 6. Monitors One of the main goals of this document is to keep the symbols simple and to minimize the number symbols. Keeping with this philosophy, many symbols can be employed to indicate multiple functions. Example: When the water discharge symbol is located on or next to the control it will be apparent that the label is identifying the water discharge control function. When the same symbol is placed next to the discharge outlet it is apparent that the label is identifying the discharge outlet. When the same symbol is located below the pressure gauge it is apparent that the symbol is describing the function of the gauge. For this reason separate symbols for control, outlet, and pressure are not needed. If there are multiple monitors on the same apparatus they should be numbered. monitors consecutively beginning at the front of the apparatus and moving to the back, then up the aerial device. 7. Aerial s Where there are multiple devices on the same apparatus, and one of them is associated with the aerial, it is permissible to use the aerial symbol in place of the numbering system. 8. Aerial Monitor ing the monitors on an aerial by starting at the center tip of the ladder or in the center of the basket facing along the device. monitors to the left with even numbers and to the right as odd numbers and then increasing the number going down the device toward the base. 9. Manual Override Function Label manual override valves on aerial device functions with the switch interlock override symbol above each of the specific control function symbols. Page 8 of 60 Manufacturers Association TC008 - s docx

9 s for Automotive 8 Base s Description or 8.01 Water 0536 ISO Foam Concentrate CEN 5989: Foam Solution CEN 5989: Powder CEN 5989: Compressed Air Foam (CAF) Wet 8.06 Compressed Air Foam (CAF) Dry Page 9 of 60 Manufacturers Association TC008 - s docx

10 s for Automotive Description or 8.07 Halotron Page 10 of 60 Manufacturers Association TC008 - s docx

11 s for Automotive 9 General Description or 9.01 On / Start Use independently or in conjunction with other symbols. Do not use as a graphical element in developing combined symbols per Clause IEC Off / Stop Use independently or in conjunction with other symbols. Do not use as a graphical element in developing combined symbols per Clause IEC On and Off Use independently or in conjunction with other symbols. Do not use as a graphical element in developing combined symbols per Clause IEC Clock / Time Switch / Timer 5184 IEC Fast This symbol is published without a registration number in the ISO standards indicated SAE J Slow This symbol is published without a registration number in the ISO standards indicated SAE J1362 Page 11 of 60 Manufacturers Association TC008 - s docx

12 s for Automotive Description or 9.07 Continuously Variable Linear 5004 IEC Continuously Variable Rotational 1364 ISO Unlock - or - Switch Interlock Use to label a switch or control that must be held in the engaged position to allow another switch or control to function ( dead-man feature) Bell - or - Alarm Use as an urgent alert indicator to call attention to another (already existing) symbol SAE J ISO Manual Operation / Manual Start Use as a symbol element in a combined symbol or in conjunction with a function symbol to indicate manual operating mode ISO Automatic Operation / Automatic Start Use as a symbol element in a combined symbol or in conjunction with a function symbol to indicate automatic operating mode SAE J1362 Page 12 of 60 Manufacturers Association TC008 - s docx

13 s for Automotive Description or 9.13 Back 9.14 Select 9.15 Up 9.16 Down 9.17 Warning 9.18 Engine Rotational Speed 1389 ISO 7000 Page 13 of 60 Manufacturers Association TC008 - s docx

14 s for Automotive Description or 9.19 Engine Rotational Speed Instantaneous Decrease 2308 ISO Engine Coolant 1377 ISO Fuel Level 1551 ISO Emergency Stop To be shown with white border, red background, and white letters SAE J Power Take-Off (PTO) CEN 5989: Power Take-Off Engage CEN 5989:2010 Page 14 of 60 Manufacturers Association TC008 - s docx

15 s for Automotive Description or 9.25 Road Mode Mid-ship pump disengaged and vehicle is ready to drive Engine Operating Hours 9.27 Standby 9.28 Breathing Air (SCBA) Indicate max pressure for breathing air outlets. without the pressure designations can be used to indicate SCBA storage locations, brackets, etc 9.29 Siren, Mechanical 9.30 Horn 0244 ISO 7000 Page 15 of 60 Manufacturers Association TC008 - s docx

16 s for Automotive Description or 9.31 Air Horn 9.32 Foam Pressure Foam pressure can also be indicated by placing the basic foam symbol on or underneath the foam pressure gauge Hydraulic Pressure Hydraulic pressure can also be indicated by placing the basic hydraulic symbol on or underneath the hydraulic pressure gauge Hydraulic Pump 9.35 Air Compressor 9.36 Radiator Re-Fill Use this symbol for the method of refilling the radiator with water from the fire suppression pump in the event that the cooling system springs a leak. Page 16 of 60 Manufacturers Association TC008 - s docx

17 s for Automotive Description or 9.37 Emergency Power Unit Use this symbol for the electric-over-hydraulic pump used to provide emergency hydraulic power in the event of a main apparatus engine or hydraulic pump failure Water Flush Use this symbol for control valves or fittings that allow a system to be flushed with water Air Purge or Drain Use this symbol for control valves or fittings that allow a system to be purged with air, or a valve that allows a compressed air device or system to be drained Ladder Rack Down Use this symbol for control of any powered ladder rack or gantry Ladder Rack Up Use this symbol for control of any powered ladder rack or gantry Compartment Door Alert Use this symbol to indicate that a compartment door is not secured. Page 17 of 60 Manufacturers Association TC008 - s docx

18 s for Automotive Description or 9.43 Pumper Apparatus 9.44 Aerial Ladder Apparatus 9.45 Suspension, Front 9.46 Suspension, Rear 9.47 Helmet Restraint 9.48 Compartment Door Page 18 of 60 Manufacturers Association TC008 - s docx

19 s for Automotive Description or 9.49 Fire Equipment Restraint 9.50 Auxiliary Cooler ISO 7000 CEN Height of vehicle, hint for driver Fit the sign in the view of driver; diameter of sign approximately 50 mm. Value in feet (ft) and inches (in), or meters(m). Width of vehicle, hint for driver Fit the sign in the view of driver; diameter of sign approximately 50 mm. Value in feet (ft) and inches (in), or meters(m). GVWR of vehicle, hint for driver Fit the sign in the view of driver; diameter of sign approximately 50 mm. Value in tons (t) or metric tons (t) Fording depth, water crossing ability Fit the sign outside in the appropriate height at driver side of the cabin; width of the symbol at least 50 mm CEN CEN CEN CEN Page 19 of 60 Manufacturers Association TC008 - s docx

20 s for Automotive Description or Fording depth, water crossing ability, hint for driver 9.55 Fit the sign in the view of driver; diameter of sign approximately 50 mm CEN Video Camera CEN Rear View Video Camera CEN Wind Speed ISO 7000 CEN Compartment Door Open CEN Apparatus Front View Page 20 of 60 Manufacturers Association TC008 - s docx

21 s for Automotive 9.61 Aerial Apparatus Front View Page 21 of 60 Manufacturers Association TC008 - s docx

22 s for Automotive 10 Discharges and Intakes Description or Water Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match Foam Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match CAFS Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match Powder Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match Foam or Water Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match CAFS or Water Discharge Replace N with a number designation so that the corresponding control, gauge, and function or device all match. Page 22 of 60 Manufacturers Association TC008 - s docx

23 s for Automotive Description or Stream Fog Discharge Drain or Bleeder Replace N with a number designation so that the corresponding control, gauge, and function or device all match Aerial Platform Water Curtain Pavement Cooler Discharge Intake Replace N with a number designation so that the corresponding control, gauge, and function or device all match. Page 23 of 60 Manufacturers Association TC008 - s docx

24 s for Automotive Description or Intake Drain or Bleeder Replace N with a number designation so that the corresponding control, gauge, and function or device all match Foam Intake Remote Monitor Replace N with a number designation so that the corresponding control, gauge, and function or device all match Manual Monitor Replace N with a number designation so that the corresponding control, gauge, and function or device all match Monitor Elevate Monitor Depress Page 24 of 60 Manufacturers Association TC008 - s docx

25 s for Automotive Description or Monitor Lower Monitor Raise Monitor Rotate CCW Monitor Rotate CW Monitor Oscillate Monitor Stow Page 25 of 60 Manufacturers Association TC008 - s docx

26 s for Automotive Description or Monitor Drain or Bleed Aerial Water Discharge Aerial Foam Discharge Aerial CAF Discharge Aerial Powder Discharge Aerial Discharge Drain Page 26 of 60 Manufacturers Association TC008 - s docx

27 s for Automotive Description or Aerial Intake Shower Discharge Nozzle Flush Page 27 of 60 Manufacturers Association TC008 - s docx

28 s for Automotive 11 - Tanks Description or Tank Water Tank CEN Foam Tank CEN Powder Tank Hydraulic Tank Tank Fill CEN ISO 7000 Page 28 of 60 Manufacturers Association TC008 - s docx

29 s for Automotive Description or Water Tank Fill Use this symbol for both top and direct tank fill locations Foam Tank Fill Powder Tank Fill Hydraulic Tank Fill Tank Outlet CEN Water Tank Outlet Page 29 of 60 Manufacturers Association TC008 - s docx

30 s for Automotive Description or Foam Tank Outlet Tank Drain CEN ISO Water Tank Drain Foam Tank Drain Hydraulic Tank Drain Tank Level CEN Page 30 of 60 Manufacturers Association TC008 - s docx

31 s for Automotive Description or Water Tank Level Foam Tank Level Hydraulic Tank Level Water Tank Heater Halotron Tank Fill Powder Tank Fill Page 31 of 60 Manufacturers Association TC008 - s docx

32 s for Automotive 12 - Fire Suppression Pump Functions and Features Description or Pump CEN Pump Engage Pump Engage Manually Water Pump Engage Foam Pump Engage Pump Intake Use this symbol to label the master pump intake pressure gauge and to label the pump intake valve if there is only one intake valve on the apparatus. Page 32 of 60 Manufacturers Association TC008 - s docx

33 s for Automotive Description or Pump Discharge Use this symbol to label the master pump discharge pressure gauge and to label the pump discharge valve if there is only one discharge valve on the apparatus Pump Priming Use this symbol when there is only one pump priming device on the apparatus CEN Pump Priming Use this symbol when there are more than one priming pumps on the apparatus. Replace N with a number to match the pump with its control Pump Drain CEN Pump-to-Tank Valve Tank-to-Pump Valve Page 33 of 60 Manufacturers Association TC008 - s docx

34 s for Automotive Description or Pump Cooling Recirculation Valve Pump Water Temperature Use this symbol illuminated in red, or in conjunction with a red lamp, to indicate that the pump water temperature is at a critical level. Use without color to label a pump water temperature gauge. Pump Transmission Temperature Use this symbol illuminated in red, or in conjunction with a red lamp, to indicate that the pump transmission temperature is at a critical level. Use without color to label a pump transmission temperature gauge Water Pump Discharge Relief Foam Pump Discharge Relief Pump, Low Pressure Use this symbol to label the low pressure control position on a pump which has multiple pressure settings. This would be the single-stage setting of a twostage pump. Page 34 of 60 Manufacturers Association TC008 - s docx

35 s for Automotive Description or Pump, High Pressure Use this symbol to label the high pressure control position on a pump which has multiple pressure settings. This would be the two-stage setting of a twostage pump Pump, Ultra High Pressure Use this symbol to label the highest pressure control position on a pump which has more than two pressure settings Pump Heater Pump Compartment Heater Pump Hours Use this symbol to label the meter that keeps track of the running time for the fire suppression pump Pump Pressure Governor Page 35 of 60 Manufacturers Association TC008 - s docx

36 s for Automotive 13 - Hose Description or Hose Reel CEN Hose Reel Wind Out CEN Hose Reel Wind In CEN Pre-Connect Hose Replace N with a number designation so that the corresponding control, gauge, and function or device all match Hose Hose Restraint Page 36 of 60 Manufacturers Association TC008 - s docx

37 s for Automotive 14 Aerial Device Description or Aerial Extend Aerial Retract Aerial Elevate Aerial Depress Aerial Rotate CCW Aerial Rotate CW Page 37 of 60 Manufacturers Association TC008 - s docx

38 s for Automotive Description or Aerial Articulate Extend Aerial Articulate Retract Aerial Articulate Elevate Aerial Articulate Depress Aerial Boom Raise Aerial Boom Lower Page 38 of 60 Manufacturers Association TC008 - s docx

39 s for Automotive Description or Ladder Rungs Aligned Aligned With Cradle Automatic Aerial Stowing Aerial Monitor Water Tower Mode Aerial Monitor Rescue Mode Movable Monitor Not Secure Page 39 of 60 Manufacturers Association TC008 - s docx

40 s for Automotive Description or Aerial Overload Aerial Platform Overload Aerial Platform Leveling Aerial Platform Rotate CCW Aerial Platform Rotate CW Aerial Hours Page 40 of 60 Manufacturers Association TC008 - s docx

41 s for Automotive Description or Aerial Power Aerial Device Enable Control that will unlock the aerial device after it has been paused by and interlock or other event Tip Controls Enable Control that must be engaged to allow the secondary operator to control the aerial from the tip or from the platform Aerial Waterway Wet Indicates that the waterway is charged or full of water Aerial Monitor Nozzle Angle Up Indicates that the monitor is angled above the angle of the ladder. Page 41 of 60 Manufacturers Association TC008 - s docx

42 s for Automotive 15 - Stabilizers Description or 15.01L Left Stabilizer Up SAE J R Right Stabilizer Up SAE J L Left Stabilizer Down SAE J R Right Stabilizer Down SAE J L Left Beam In SAE J R Right Beam In SAE J1362 Page 42 of 60 Manufacturers Association TC008 - s docx

43 s for Automotive Description or 15.04L Left Beam Out SAE J R Right Beam Out SAE J L Left Jack Up SAE J R Right Jack Up SAE J L Left Jack Down SAE J R Right Jack Down SAE J1362 Page 43 of 60 Manufacturers Association TC008 - s docx

44 s for Automotive Description or Stabilizer Off-Level Warning Stabilizers Automatic Leveling Stabilizers Manual Leveling Stabilizers Short-Jacked Warning Stabilizers Set ISO 7000 CEN Stabilizer Locations ISO 7000 CEN Page 44 of 60 Manufacturers Association TC008 - s docx

45 s for Automotive Description or 15.13FL Front Left Beam In 15.13FR Front Right Beam In 15.13RL Rear Left Beam In 15.13RR Rear Right Beam In 15.14FL Front Left Beam Out 15.14FR Front Right Beam Out Page 45 of 60 Manufacturers Association TC008 - s docx

46 s for Automotive Description or 15.14RL Rear Left Beam Out 15.14RR Rear Right Beam Out 15.15FL Front Left Jack Up 15.15FR Front Right Jack Up 15.15RL Rear Left Jack Up 15.15RR Rear Right Jack Up Page 46 of 60 Manufacturers Association TC008 - s docx

47 s for Automotive Description or 15.16FL Front Left Jack Down 15.16FR Front Right Jack Down 15.16RL Rear Left Jack Down 15.16RR Rear Right Jack Down 15.17FL Front Left Stabilizer Up 15.17FR Front Right Stabilizer Up Page 47 of 60 Manufacturers Association TC008 - s docx

48 s for Automotive Description or 15.17RL Rear Left Stabilizer Up 15.17RR Rear Right Stabilizer Up 15.18FL Front Left Stabilizer Down 15.18FR Front Right Stabilizer Down 15.18RL Rear Left Stabilizer Down 15.18RR Rear Right Stabilizer Down Page 48 of 60 Manufacturers Association TC008 - s docx

49 s for Automotive Description or 15.19L Left Stabilizer Extend, Inclined ISO 7000 CEN R Right Stabilizer Extend, Inclined 15.20L Left Stabilizer Retract, Inclined ISO 7000 CEN R Right Stabilizer Retract, Inclined Page 49 of 60 Manufacturers Association TC008 - s docx

50 s for Automotive 16 - Electrical Description or Battery 0247 ISO Ammeter CEN Generator 1153 ISO Generator Pre-Heater Voltmeter CEN Electrical Outlet Replace N with the number of the circuit that it is powered from. Replace the xxx with the voltage and xx with the amperage of the circuit. Page 50 of 60 Manufacturers Association TC008 - s docx

51 s for Automotive Description or Electrical Cord Reel Outlet Replace N with the number of the circuit that it is powered from. Replace the xxx with the voltage and xx with the amperage of the circuit Battery Disconnect; Battery Shut-Off ISO 7000 CEN Intercom Page 51 of 60 Manufacturers Association TC008 - s docx

52 s for Automotive 17 - Lighting Description or Panel Light Use this symbol for the pump panel light control, instrument panel light control, or similar lighting that illuminates controls or gauges SAE J1362 IEC Dome Light B SAE J1362 ISO Flood Light 1204 ISO Adjustable Work Light 1142 ISO Reading Light CEN Engine Compartment Light Page 52 of 60 Manufacturers Association TC008 - s docx

53 s for Automotive Description or Pump Compartment Light Hose Bed Light Front Scene Light Rear Scene Light Left Side Scene Light Right Side Scene Light Page 53 of 60 Manufacturers Association TC008 - s docx

54 s for Automotive Description or Perimeter Ground Lights Elevating Light Elevating Light Raise Elevating Light Lower Elevating Light Elevate Elevating Light Depress Page 54 of 60 Manufacturers Association TC008 - s docx

55 s for Automotive Description or Elevating Light Rotate CCW Elevating Light Rotate CW Elevating Light Stow Use this symbol regardless of how the light and mast physically fold up Aerial Base Lights Aerial Tip Lights Aerial Ladder Climbing Lights Page 55 of 60 Manufacturers Association TC008 - s docx

56 s for Automotive Description or Day-Night Switch CEN Low level interior illumination To identify the control for the interior compartment lighting used to assist in maintaining the dark adaptation (night vision) of the operator while providing illumination to the interior ISO Aerial Tip Light 110V Aerial Tip Light 12V Page 56 of 60 Manufacturers Association TC008 - s docx

57 s for Automotive 18 - Foam and CAFS Description or Foam Concentrate Injection CEN Foam Concentrate Injection Rating by Percent CEN Foam Concentrate Injection, ON CEN Foam Concentrate Injection, OFF CEN Foam Concentrate Injection, ON- OFF CEN Foam Concentrate and Air Injection CEN Page 57 of 60 Manufacturers Association TC008 - s docx

58 s for Automotive Description or Foam Concentrate and Air Injection, ON CEN Foam Concentrate and Air Injection, OFF CEN Foam Concentrate and Air Injection, ON-OFF CEN Page 58 of 60 Manufacturers Association TC008 - s docx

59 s for Automotive 19 Revisions Date (s) Description of Change 10/01/ Replaced Stabilizers Set pictorial with image used by ISO 7000 and CEN /01/ Replaced stabilizer pictorials with images from ISO 7000 and SAE J /01/ Added pictorials that depict the function as well as the location of the stabilizer controls using a combination of symbols from ISO 7000 and SAE J /23/2017 Updated document format to new FAMA logo and appearance. 12/23/ New symbol for low level interior illumination to stay current with changes to SAE and ISO 7000 and as an alternative to the day-night switch icon. 12/23/ , 9.34, 9.37 Revised hydraulic cylinder symbol closer to the proportions found in SAE J /23/ Thru 9.49 Added base symbols for pumper and aerial apparatus, suspensions, helmet restraint, roll-up door, and equipment restraint. 12/23/ Added symbol for pressure governor 12/23/ , 13.06, Added symbols for hose and hose restraint. Updated hose bed light symbol to use new hose graphics. 12/23/ , 15.09, Updated graphics to reflect changes previously made to the stabilizer symbols in conformance with SAE J1362 Page 59 of 60 Manufacturers Association TC008 - s docx

60 s for Automotive 12/23/2017 Color Chart Added standard safety color chart to assist graphic designers in producing consistent art. 12/23/2017 CEN Added misc. symbols from the 2015 version of CEN 15989: 3.3.6, 3.3.7, 3.3.8, 3.3.9, , 3.3.5, , , , , 3.5.5, , /23/2017 FOAM Chapter Added Chapter 18 Foam and CAFS to contain the foam and CAFS symbols from the 2015 version of CEN /27/ , 9.61, 10.33, 10.34, 14.26, 14.27, 14.28, 14,29, 17.27, Added New s Page 60 of 60 Manufacturers Association TC008 - s docx