2019 Medical Power Solutions Product Portfolio

Transcription

1 09 Medical Power Solutions Product Portfolio

2 Company Profile TRACO Electronic AG is a Swiss company with headquarters based in Baar, Switzerland. As a leading power supply specialist with more than 35 years experience we are dedicated to the design and manufacturing of high quality DC/DC and AC/DC power conversion products. TRACO markets its products worldwide under the registered trademark TRACO POWER. Our mission is to provide our customers with optimal power supply solutions in terms of performance, quality and cost for their individual application. TRACO POWER products for applied versus non-applied medical requirements For non-applied parts sections of medical equipment, power and safety requirements can be satisfied by any of Traco Power power supplies, non-medical for xmoop applications and medical rated power supplies for all other MOPP levels. If this part of the system is attaching to a DC input from a non-medical rated power supply, then use of our DC/DC Converters should satisfy safety requirements for xmopp / xmopp applications. For applied parts sections of medical equipment, the clearance and creepage distances, as well as a secondary isolation barrier are required to further isolate the patient from potentially high voltages (xmopp is means of patient protection). The isolation barrier may be satisfied using Traco Power medical rated xmopp AC/DC power supplies or DC/DC converters. Even this reinforced insulation system does not unconditionally qualify a power supply unit and DC/DC converter for medical applications. Particular and collateral standards also require that a risk/quality management System be in place at the component level, especially for safety critical applications. TRACO POWER products for applied parts applications with a xmopp rating, have been carefully designed and manufactured to the highest standards to meet the increased quality, reliability and safety standards for medical equipment. These products have fully regulated output voltages and feature: Product certification according to IEC/EN/ES rd edition for xmopp Risk management process according to ISO 497 including risk management file EMC emission and immunity to IEC edition 4 Acceptance criteria for electronic assemblies according to IPC-A-60 Level 3 Design and production to ISO 3485 quality management system 5-year product warranty

3 Index Page(s) DC/DC Converters TIM (SM) Series... Watt in DIP-6 or SMD package... 4 TIM 3.5(SM) Series Watt in DIP-6 or SMD package... 4 THM 3(WI) Series... 3 Watt in DIP-4 package... 4 THM 6(WI) Series... 6 Watt in DIP-4 package... 5 THM 0(WI) Series... 0 Watt in DIP-4 package... 5 THM 5(WI) Series... 5 Watt in.6 x package... 5 THM 0(WI) Series... 0 Watt in.6 x package... 6 THM 30(WI) Series Watt in x package... 6 AC/DC Power Supplies TMF 05 Series... 5 Watt encapsulated power module... 7 TMF 0 Series... 0 Watt encapsulated power module... 7 TPP 5 Series... 5 Watt open frame/encapsulated power module TMF 0 Series... TMF 30 Series... 0 Watt encapsulated power module Watt encapsulated power module... 9 TPP 30 Series Watt open frame/encapsulated power module TPP 40 Series Watt open frame/encased power supply... TPP 65 Series Watt open frame/encased power supply... - TPP 00 Series Watt open frame/encased power supply... TPP 50 Series Watt open frame/encased power supply... 3 TPP 80 Series Watt open frame power supply... 3 TPP 300 Series Watt open frame power supply... 4 TPP 450 Series Watt open frame/encased power supply... 4

4 PAGE 4 DC / DC CONVERTERS TIM (SM) Series Watt DC/DC converter in DIP or SMD package 3: input voltage with extended low input range: 4.5-, 9-8, 8-36, , 5.0,, 5, 4, ±, ±5 VDC : Vin : On/Off 7: NC 8: NC / com 9: +Vout 0: Vout 6: +Vin 4.3 (0.96) 7 8 DIP (0.57) I/O isolation 5000 VACrms rated for 50 VACrms working voltage 0. (0.40) Low leakage current < µa Input filter to meet EN 5503 class A 0.5 (0.4) SMD-6 version DIP-6 version SMD-6 top view (0.57) 8. (0.7) TIM 3.5(SM) Series 3.5 Watt DC/DC converter in DIP-6 package : input voltage with extended low input range: 4.5-, 9-8, 8-36, ,, 5, 4, ±, ±5 VDC : Vin : On/Off 7: NC 8: NC / com 9: +Vout 0: Vout 6: +Vin 4.3 (0.96) 7 8 DIP (0.57) I/O isolation 5000 VACrms rated for 50 VACrms working voltage 0. (0.40) Low leakage current < µa Input filter to meet EN 5503 class A 0.5 (0.4) SMD-6 version DIP-6 version SMD-6 top view (0.57) 8. (0.7) THM 3(WI) Series 3 Watt DC/DC converter in DIP-4 package THM 3: : input voltage ranges 4.5-9, 9-8, 8-36, THM 3WI: 4: input voltage ranges 4.5-9, 9-36, 8-75 VDC 3.3, 5.0,, 5, 4, ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage Low leakage current < µa Very high efficiency up to 87% Extended operating temperature range 40 C to 80 C at full load. Input filter to meet EN 5503 class A : Input : +Vin : no pin : Vout 3: +Vout 5: no pin 3: Vin 4: Vin : +Vin : com : no pin 3: Vout 5: +Vout 3: Vin 4: Vin 4: Input : NC 4: +Vout 6: Vout : +Vin 3: +Vin : Vout 4: +Vout 6: com : +Vin 3: +Vin Optional: interchanged pinning : input pinning 4: input pinning 3.8 (.5) (0.80) 0.3 (0.80) 0. (0.40)

5 DC / DC CONVERTERS PAGE 5 THM 6(WI) Series 6 Watt DC/DC converter in DIP-4 package THM 6: : input voltage ranges 4.5-9, 9-8, 8-36, THM 6WI: 4: input voltage ranges 4.5-9, 9-36, 8-75 VDC 3.3, 5.0,, 5, 4, ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage Low leakage current < µa Very high efficiency up to 88% Extended operating temperature range 40 C to 70 C at full load. Input filter to meet EN 5503 class A : Input : +Vin : no pin : Vout 3: +Vout 5: no pin 3: Vin 4: Vin : +Vin : com : no pin 3: Vout 5: +Vout 3: Vin 4: Vin 4: Input : NC 4: +Vout 6: Vout : +Vin 3: +Vin : Vout 4: +Vout 6: com : +Vin 3: +Vin Optional: interchanged pinning : input pinning 4: input pinning 3.8 (.5) (0.80) 0.3 (0.80) 0. (0.40) THM 0(WI) Series 0 Watt DC/DC converter in DIP-4 package THM 0: : input voltage ranges 4.5-9, 9-8, 8-36, THM 0WI: 4: input voltage ranges 4.5-9, 9-36, 8-75 VDC 3.3, 5.0,, 5, 4, ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage Low leakage current < µa Very high efficiency up to 89% Input filter to meet EN 5503 class A : Input : +Vin : no pin : Vout 3: +Vout 5: no pin 3: Vin 4: Vin : +Vin : com : no pin 3: Vout 5: +Vout 3: Vin 4: Vin 4: Input : NC 4: +Vout 6: Vout : +Vin 3: +Vin : Vout 4: +Vout 6: com : +Vin 3: +Vin : input pinning 4: input pinning 3.8 (.5) (0.80) 0.3 (0.80) Optional: interchanged pinning 0. (0.40) THM 5(WI) Series Watt DC/DC converter in.6 x package THM 5: : input voltage ranges: 9-8, 8-36, THM 5WI: 4: input voltage ranges: 9-36, ,, 5, 4 VDC adjust. ±0% ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage : +Vin 3: +Vout 4: Vout 5: Trim : +Vin 3: +Vout 4: com. 5: Vout 50.8 (.0) (.0) Low leakage current Very high efficiency up to 90% 0. (0.4)

6 PAGE 6 DC / DC CONVERTERS THM 0(WI) Series 0 Watt DC/DC converter in.6 x package THM 0: : input voltage ranges: 9-8, 8-36, THM 0WI: 4: input voltage ranges: 9-36, ,, 5, 4 VDC adjust. ±0% ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage : +Vin 3: +Vout 4: Vout 5: Trim : +Vin 3: +Vout 4: com. 5: Vout 50.8 (.0) (.0) Low leakage current Very high efficiency up to 90% 0. (0.4) THM 30(WI) Series Watt DC/DC converter in x package THM 30: : input voltage ranges: 9-8, 8-36, THM 30WI: 4: input voltage ranges: 9-36, ,, 5, 4 VDC adjust. ±0% ±5, ±, ±5 VDC I/O isolation 5000 VACrms rated for 50 VACrms working voltage Low leakage current Very high efficiency up to 90% : +Vin 3: +Vout 4: Vout 5: Trim : +Vin 3: +Vout 4: com. 5: Vout 50.8 (.0) (.0) 0. (0.4)

7 AC / DC POWER SUPPLIES PAGE 7 TMF 05 Series 5 Watt AC/DC power module AC (L) Vout 5.0,, 5, 4 VDC Fully encapsulated ultra compact plastic casing for PCB mount AC (N) +Vout 7. (.07) 4. (.6) 5 C to 70 C. 9.(0.75) TMF 0 Series 0 Watt AC/DC power module AC (N) +Vout 5.0,, 5, 4 VDC Vout 6.8 (.06) Fully encapsulated ultra compact plastic casing for PCB mount AC (L) 5. (.06) 5 C to 70 C. 9.0 (0.75) TPP 5A-J Series 5 Watt AC/DC open frame power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 48 VDC 40 C to 85 C. Available for PCB mount (-D) or with Pin-connector (-J) 66. (.6) 5.4 (.00) 8.5 (0.7)

8 PAGE 8 AC / DC POWER SUPPLIES TPP 5A-D Series 5 Watt AC/DC open frame power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 48 VDC 40 C to 85 C. Available for PCB mount (-D) or with Pin-connector (-J) : AC (N) : AC (L) 3: Trim 4: Vout 5: +Vout 38. (.50) Bottom view (.0) 5.8 (.0) 5 TPP 5-J Series 5 Watt AC/DC encapsulated power supply 7.7 (.8) Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 48 VDC 8.9 (.4) Top view 40 C to 85 C. Available for PCB mount (-D) or for chassis mount (-J) Front view 0.9 (0.8) TPP 5-D Series 5 Watt AC/DC encapsulated power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 48 VDC : AC (N) : AC (L) 3: Trim 4: Vout 5: +Vout.5 (0.85) 3.8 (0.5) 40 C to 85 C. 8.9 (.4) Bottom view 3 4 Available for PCB mount (-D) or for chassis mount (-J) (.65)

9 AC / DC POWER SUPPLIES PAGE 9 TMF 0 Series 0 Watt AC/DC power module 5.0,, 5, 4 VDC Fully encapsulated ultra compact plastic casing for PCB mount AC (N) Vout +Vout 44.9 (.76) AC (L) 5 C to 70 C (.6) 3.5 (0.93) TMF 30 Series 30 Watt AC/DC power module 5.0,, 5, 4 VDC AC (N) Vout 45.6 (.80) Fully encapsulated ultra compact plastic casing for PCB mount AC (L) 64. (.5) +Vout 5 C to 70 C. 3.5 (0.93) TPP 30A-J Series 30 Watt AC/DC open frame power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 36, 48 VDC 40 C to 85 C (.36).4 (0.88) 84.8 (3.34) Available for PCB mount (-D) or with Pin-connector (-J)

10 PAGE 0 AC / DC POWER SUPPLIES TPP 30A-D Series 30 Watt AC/DC open frame power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 36, 48 VDC : AC (N) : AC (L) 3: +Vout 4: Vout 5: Trim 7.9 (.) 40 C to 85 C (.74) (.36) Available for PCB mount (-D) or with Pin-connector (-J) 5 TPP 30-J Series 30 Watt AC/DC encapsulated power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 36, 48 VDC 40 C to 85 C. Available for PCB mount (-D) or for chassis mount (-J) 38. (.50) 5.4 (.00) 00.3 (3.95) Top view Front view TPP 30-D Series 30 Watt AC/DC encapsulated power supply Output voltages adjust ±0%: 3.3, 5.0,, 5, 4, 36, 48 VDC 40 C to 85 C. : AC (N) : AC (L) 3: +Vout 4: Vout 5: Trim 38. (.50) 9.4 (.5) 3 Bottom view 4 5 Available for PCB mount (-D) or for chassis mount (-J) 73.3 (.89)

11 AC / DC POWER SUPPLIES PAGE TPP 40A Series 40 Watt AC/DC open frame power supply Output voltages (Vout adjust. ±0%) single: 5.0,, 4, 48 VDC Protection class I & II prepared Optional: individual output voltage 76. (3.00) 6.5 (.04) 50.8 (.00) TPP 40 Series 40 Watt AC/DC metal enclosure power supply Output voltages (Vout adjust. ±0%) single: 5.0,, 5, 4, 48 VDC dual: /5, 5/5, 4/5 VDC triple: ±/5, ±5/5, 4/5/ VDC L = 89.7 (3.53) H = 33.3 (.3) Multi output L = 0.4 (4.03) H = 34.3 (.36) L H V adjust Optional: DIN-rail, individual output voltages Input Output 60.5 (.38) TPP 65A Series 65 Watt AC/DC open frame power supply Output voltages (Vout adjust. ±0%) single: 5.0,, 5, 4, 48 VDC dual: /5, 5/5, 4/5 VDC triple: ±/5, ±5/5, 4/5/ VDC Optional: individual output voltages 76. (3.00) 6.5 (.04) 50.8 (.00)

12 PAGE AC / DC POWER SUPPLIES TPP 65 Series 65 Watt AC/DC metal enclosure power supply Output voltages (Vout adjust. ±0%) single: 5.0,, 5, 4, 48 VDC dual: /5, 5/5, 4/5 VDC triple: ±/5, ±5/5, 4/5/ VDC L = 89.7 (3.53) H = 33.3 (.3) Multi output L = 0.4 (4.03) H = 34.3 (.36) L H V adjust Optional: Open frame, DIN-rail, individual output voltages Input Output 60.5 (.38) TPP 00A Series 00 Watt AC/DC open frame power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Active power factor correction Optional: individual output voltages 76. (3.00) 3.0 (.6) 50.8 (.00) TPP 00 Series 00 Watt AC/DC metal enclosure power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Active power factor correction Optional: DIN-rail, individual output voltages 9.4 (3.60) 39. (.54) 6.0 (.44)

13 AC / DC POWER SUPPLIES PAGE 3 TPP 50A Series 50 Watt AC/DC open frame power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Active power factor correction Optional: individual output voltages 0.6 (4.00) 3.0 (.6) 50.8 (.00) TPP 50 Series 50 Watt AC/DC metal enclosure power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Active power factor correction Optional: DIN-rail, individual output voltages 6.8 (4.60) 49. (.94) 6.0 (.44) TPP 80A Series 80 Watt AC/DC open frame power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Ultra compact design, high power density in 3 x package Active power factor correction 76. (3.00) 50.8 (.00) (.6)

14 PAGE 4 AC / DC POWER SUPPLIES TPP 300A Series 300 Watt AC/DC open frame power supply Output voltages adjustable ±0%:, 5, 4, 8, 36, 48 VDC Ultra compact design, high power density in 3 x package Active power factor correction 0.6 (4.00) 50.8 (.00) 3.0 (.6) TPP 450A Series 450 Watt AC/DC open frame power supply High power density 3 x Watt with forced air cooling 30 Watt convection cooled without derating up to 50 C Additional IT (UL 6368-) approvals Output voltages adjustable ±0%:, 5, 4, 8, 36, 48, 53 VDC Active power factor correction Protection class I Auxiliary output for fan (5.00) 3.0 (.6) 76. (3.00) TPP 450 Series 450 Watt AC/DC metal enclosure power supply High power density 3 x Watt up to 65 C without derating 30 Watt fanless operation without derating up to 50 C Additional IT (UL 6368-) approvals Output voltages adjustable ±0%:, 5, 4, 8, 36, 48, 53 VDC Active power factor correction Protection class I Temperature controlled fan (5.83) 40.6 (.6) 76. (3.00)

15

16 PP0900 TRACO POWER dedicated to design and production of high quality, state-of-the-art DC / DC & AC / DC power conversion products. Our mission is to provide optimal power supply solutions for specific applications with regard to performance, quality, cost and functionality. TRACO POWER stocks an average of USD 5+ million in available finished goods inventory for immediate shipment through our distribution partners. TRACO POWER offers extended product life-cycles, typically 0+ years, and our medical products are supported by a 5 year product warranty. We understand our customers require a high quality solution as well as a diverse product offering, availability from stock, extended life-cycles and a strong commitment to quality in the form of extended warranty to support their business. International Office German Office French Office North America Office Design & Development Traco Electronic AG Sihlbruggstrasse 6340 Baar Switzerland Traco Electronic GmbH Oskar-Messter-Str. 0a Ismaning/München Germany Traco Power France 7, rue de la Vanne 90 Montrouge France Traco Power North America, Inc. 05 Gateway Place #330 SAN JOSE, CA 950 USA Traco Power Solutions Ltd. Whitemill Industrial Estate Whitemill Road, Wexford Y35 YH66, Ireland P F info@tracopower.com P F info@tracopower.de M +33 (0)6 7 5 info@tracopower.fr P + (408) F + (408) salesusa@tracopower.com P + (408) F + (408) info@tracopower.ie Copyright 09 Traco Electronic AG