& PNEUMATICS/ACADEMY TOOL & SUPPLY

Transcription

1 S SERVICE PARTS ACE HYDRAULIC & PNEUMATICS/ACADEMY TOOL & SUPPLY Due to Promotions SOME SUPPLIES MAY BE LIMITED 6720 VIP Parkway Syracuse, New York Phone Hour Fax Good Through June 2017 AUTOMOTIVE CONSTRUCTION INDUSTRIAL TOOLS PRICES SUBJECT TO CHANGE by Some Manufacturers mm HVLP Gravity Feed Spray Gun pc. HVLP Triple Setup Spray Gun Kit 4pc. HVLP Triple Setup Spray Gun Kit Color-Coded pc. Metric Large Hex Bit Socket Set 13mm, 14mm, 15mm, 17mm, 19mm, 21mm, 22mm Pc. Pickle Fork Piece ONYX Die Grinder Kit Built-in regulator with speeds up to 20,000 RPM (204) and 25,000 RPM (201) 1/4 in. shank double cut carbide rotary bit set for a variety of applications. Includes: 1/4 in. Composite Air Die Grinder /4 in. Composite Angled Air Die Grinder /2 in. x 1 in. Cylindrical Burr - SA-5 3/8 in. x 3/4 in. Cylindrical Burr - SA-3 3/8 in. x 3/4 in. Cylindrical Radius End Burr - SC-3 1/4 in. x 5/8 in. Cylindrical Radius End Burr - SC-1 10 Pc. Snap Ring Pliers Set Snap ring pliers operates both internal and external rings Heat treated chromium-molybdenum steel Comfortable insulated vinyl handles Set includes 10 different size snap ring pliers 36 Ball Joint Separator Set Used to remove ball joints, tie rods, pitman arm, and other linkages. Open Size - 11/16, 15/16, 1-1/16, 1-7/16, and 1-5/8 Depth - 2-3/4 (69.8mm), 3 (76.2mm), 2-7/8 (73mm), 2-3/8 (63.5mm), and 3-1/8 (79.3mm) Pc 16 Snap Ring Plier Set 149 1/4 in. Ball Shaped Burr - SD-1 3/8 in. Ball Shaped Burr - SD-3 3/8 in. x 3/4 in. Tree Shaped Radius End Burr - SF-3 1/2 in. x 1 in. Tree Shaped Radius End Burr - SF-5 Molded Storage Case Internal/External heavy duty Circlip Pliers Set Replaceable tips and spring ratchet locking mechanism to securely hold against circlip tension. Range: Internal = 3-1/2 to 3/8 (for 3-1/16-6-1/4 Snap Rings), External = 1/4 to 3-3/16 (for 3-1/2-6-1/2 Snap Rings) Length 16 (400mm), Tip Size 0.12 (3.0mm) - 0o 45o 90o Set Ball Joint Service Tool w/4-wheel Drive Adapters Set contains C-frame press, 3 receiver tubes sizes: 2-3/4 x3, 2-1/4 x 2-1/2 & 1-3/4 x2, installation and removing adapters. 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles). Blow molded case Battery Chargers 6001A 6002B UL Continuous Rating 100/75A 100/80/50/40A 70/65/30A 70/60A Battery Volts 6/12 6/12/18/24 6/12/24 6/12 Manufacturer Boost Rating 625A 725A 600A 540A UL Cranking Assit Rating 375A 400A 280A 265A AC Cord DC Leads 8 4AWG 8 4 AWG 7 4 AWG 7 4 AWG Clamp Rating 500A 500A 500A 500A Transformer/Rectifier Limited Warranty 5 Years 5 Years 5 Years 5 Years Shipping Dimensions (HxWxD) 26 x 16 x x 16 x x 19 x x 19 x 16 Weight 58 lbs 70 lbs 53 lbs 48 lbs Chain Pullers Thick Steel Construction Heat Treated Drop Forged Safety Hooks Different Chain Lengths Available On Request 5-YEAR Manufacturer s Warranty At Associated Equipment Corp., we utilize more than 60 years of experience to create quality, American-made battery chargers, testers, analyzers and more, and our experience and expertise has enabled us to be a leader in the industry. Chain Distance between Hooks Rated Standard Diameter Diameter Minimum Capacity Lift (in) (mm) Pulling/Handle Net Weight Sale FALLS 405 1/2 Ton 10 1/4 6 mm 10 13/16 52 lbs 24.3 lbs Ton 10 1/4 6 mm 12 11/16 69 lbs 28.7 lbs 119 PULLERS /4 Ton 10 1/4 6 mm / lbs Ton 10 1/4 6 mm 12 11/16 69 lbs 28.7 lbs PowerLock Coupler NEW Lever activated for quick attachment and release from fitting Comfortable, ergonomic design with protective grip Easy to use Optimizes lubricant delivery Secure attachment enables single-handed use of grease gun Less grease bypass Lowers lubricant cost Durable, all-steel construction 38 3H201AK Dual Temperature Heat Gun Kit with 4 Tips 850/1120 degrees fahrenheit 39 CP Drive Impact Wrench with 6 Anvil 1,450 ft./lbs. torque. High performance clutch provides longer life under tough conditions. High efficiency 6 vane motor for maximum performance. Bottom exhaust directs exhaust away from the operator. Three position power regulator with directional control Working torque: 100-1,100 ft./lbs.; average air consumption: 8.75 cfm; free speed: 5,000 rpm; Air Inlet: 1/2 in.; sound dba: 101; length: 20.2 ; weight: 25.4 lbs. 5 Tool Antifreeze Lubricant Gal. 89 tool anti-freeze and lubricant Prevents freezing Fire resistant Absorbs moisture X1-1-6 Spiral Flute Screw Extractors Left Hand Spiral Flute Spiral Flute Extractors #1 thru # X2-1-6 Straight Flute Screw Extractor Set Straight flute screw extractor set - #1 thru # TWISTERXGO BlackGold 29-Pc Twister Set M7 molybdenum high speed steel provides superior strength and durability. More holes per drill than ordinary twist drills, especially in cordless power tools. Functional black and gold surface treatment holds lubricant for smoother drilling. Meets NAS 907B aircraft specification. Water resistant, durable plastic case. Includes 1/16 thru 1/2 x 64th XLUB-WAX-16 Brute Lube Wax Lubricant 16 Ounces Extends tool life OSHA approved, no 1,1,1 Trichloroethane Effective on stainless steel, aluminum and many exotic alloys Provides a precision finish and closer tolerances 24 TWISTER-XL5 Brute Platinum 29 Pc Twister Jobber Drill Bit Set 135 Deg. Split Point Water Resistant Index Able to flex when cobalt drills chip or snap drilling steel, especially stainless steel, titanium alloys and other hard to drill materials 89 XLUB16 Brute Lube Cutting Fluid 16-Ounces Extends tool life OSHA approved, 12 no 1,1,1 Trichloroethane Effective on stainless steel, aluminum and many exotic alloys CS40MP 40 Pc Metric 302M Carbon Plug Taps and CS30M Carbon Hex Dies Set Sizes: 3x.5, 3x.6, 4x.7, 4x.75, 5x.8, 5x.9, 6x1.0, 7x1.0, 8x1.25, 9x1.0, 9x1.25, 10x1.25, 10x1.5, 11x1.5, 12x1.5, 12x1.75; 1/8-28BSP pipe tap, 1/8-28BSP pipe die CS40P N/C/NF 40 Piece 302 Carbon Plug Taps and CS30 Carbon Hex Dies Set Sizes: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT pipe tap and die SA80-SET Brute Platinum HSS Maintenance Reamer 3 Pc Set (1/2, 5/8, 3/4 ) Effortlessly fits into small holes, quickly aligns structural steel. Fits most power tools. Deburs welded & punched holes Cuts stainless steel & tough alloys Application include steel erection, automotive, truck & trailer manufacturing and repair 149 We Carry a LARGE SELECTION of CUTTING BITS for Magnetic Drills

2 ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY MODEL Hydra-Krimp Mastercool s patented Hydra - Krimp makes crimping barbed and beaded fittings as easy as ! The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. The kit comes with a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 and #12. The dies snap quickly into the press fixture requiring no pins or screws. (patent# 6,324,884) Custom molded case. 645 MODEL Universal Hydraulic Flaring Tool Set This kit fabricates Push Connect 1/4, 5/16 and 3/8 ; GM Fuel Line Flare, Brake Lines and Transmission 5/16 and 3/8 ; Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2 ; Metric Bubble Flare 4.75, 6, 8, and 10mm. Comes in a custom molded box. 385 MODEL Double Flare & Metric Bubble Flaring Tool Set This kit fabricates flare/ double flare 3/16, 1/4, 5/16, 3/8 and 1/2 ; and metric bubble flare 4.75, 6, 8 and 10mm. Comes in a custom molded carrying case 369 Electronic Specialties ESI Amp Carbon Pile Load Tester 500 amperes adjustable load carbon pile, tests batteries rated as high as 1000 CCA or 160 amperes hour. Can also test alternators, regulators and starters. 500 amp side terminal clamps and heavy duty stranded copper cables. Meters are color coded for simple pass or fail diagnostics. 15 second test with audible tone Pc. Punch & Chisel Set Description: Prick Punch 5/16-4 1/2 Long Center Punch 3/8-5 Long 1/2-6 Long Cape Chisel 3/8-5 1/2 Long 1/2 Rnd Nose Chsl 3/8-5 1/2 Long Diamond Pt. Chisel 3/8-5 3/4 Long Pin Punch 3/32-4 1/2 Long, 1/8-4 3/4 Long, 5/32-5 Long, 3/16-5 1/4 Long, 1/4-5 3/4 Long, 5/16-6 Long Solid Punch 1/4-5 Long 3/16-5 Long 5/32-5 Long 1/8-5 Long 3/32-5 Long 5/16-6 Long Cold Chisel 1/4-5 Long 5/16-5 Long 3/8-5 1/2 Long 1/2-6 Long 5/8-6 1/2 Long 3/4-7 Long DS1210-G-K Dimensions: Outside: H x 8.00 W x D Inside: H x 7.50 W x 9.00 D Interior Cubic Feet: 0.40 Weight: Burglar Rating: B-Rate Under Counter Depository Safe Lock Technology 620 Grand Master Lock Pick Kit Ultimate pick set contains 35 picks. Includes No.`s: 280, 290, 300, 310, 320, 330-tension wrench and 106-gas cap pick tool. Custom leatherette case Features: Cash slot for easy insertion of cash and checks without unlocking. Anti-fish baffle deters removal of contents. Heavy gauge steel construction. Unique Design permits bolting and mounting to any structurally sound surface. Affordable protection. Dual-Key Lock, Standard Electronic Specialties Pro Laser/Contact Tachometer For Automotive, Marine, Small Engine, HVAC & Industrial Technicians RPM Range: 0 to,9 RPM Accuracy: percent + 1 digit Sampling time: 0.5 sec. Memory: Min/Max/Avg - Stores 10 Records Resolution: 0.1 RPM (0 to 9 RPM) 1 RPM (over 1000 RPM) Display: 5 digit LCD w/backlighting Uses include: diesel engines, generators, compressors, industrial engines & equipment, fans, gears and more Lock Technology Storage case included 9 Pc. Pilot Punch Set 1/16-5/16 Ball on the center of the point-end assures proper contact with the pin, eliminating damage to the pin or wall. Made of a highquality alloy and heat-treated for strength and toughness. Punches are designed to apply equal pressure to the end of a pin, driving it straight through the hole. PS915-B-E 333 Handgun/Pistol Safe 59 Features: Electronic push button lock. Manual key override. Programmable 3-6 digit entry code. Mounting plate, cable and hardware included. Interior Cubic Feet: 0.13 Outside Dimensions: Weight: H x 9.50 W x D Inside Dimensions: 3.00 H x 8.00 W x 9.00 D Deluxe Master Automotive Lock Out Kit Includes the Lock Tech tool This 11 piece tool kit unlock most domestic and foreign cars and trucks on the road today. Kit includes a fully illustrated instruction manual and comes in a heavy duty vinyl carrying case Icludes model numbers: 40, 80A, 95, 100, 101, 105, 106, 108, 114, WorkStar 220 Pocket Inspection Flashlight LED Brightness: 120 emitter lumens. LED, Color, Power: Cree XP-E, Cool White. 3 Watt. Batteries included: 3 AAAA alkaline. Run time with alkaline batteries: 2 hours to half brightness & 4 hours useable light with typical 19 MXN0620 Technician s Floodlight Brighter than competing work lights. Brilliant white wide angle beam. Uniform light pattern with no hot spots or dark spots. High impact PC, exceptneck and hook, which are glass reinforced ABS. Rechargeable NiMH batteries, 2+ hr on HI, 8+ hr on LO Inch Heavy Duty Hand Riveter Patented structure increases power and reduces shock Shorter handle with double compound hinges that maximize leverage. Can operate up to 1/4-Inch (6.4mm) stainless steel rivets. Includes 5 Nosepieces: 1/8 (3.2mm), 5/32 (4.0mm), 3/16 (4.8mm), 6.0mm and 1/4 (6.4mm) Bearing Race and Seal Driver Master Set Install race and seals without damage to race and axle housing Blow molded case keeps the tools organized and easy to transport Set includes 9 disc sizes to fit most standard wheel bearings Clear hard coat anodized for a lasting drive surface Weight 4 lbs Pc. Double Cut Carbide Rotary Burr Set 1/4 Shank SA-5: Cylindrical shape 1/2 x 1 ; SA-3: Cylindrical shape 3/8 x 3/4 ; SC-3: Cylindrical radius end 3/8 x 3/4 ; SC-1: Cylindrical radius end 1/4 x 5/8 ; SD-1: Ball shape 1/4 ; SD-3: Ball shape 3/8 ; SF-3: Tree shaped radius end 3/8 x 3/4 ; SF-5: Tree shaped radius end 1/2 x 1. Air Riveter 3/16 Capacity PR-36 Rivet Capacity 1/4 Overall Length 10-7/8 (280cm) Net Wt. 3-1/2 lbs (1.6kg) Stroke 15mm Motor 1/2 HP Air Inlet Thread NPT 1/4 Air Hose ID Size 3/8 (10mm) Avg. Air Compression 2,320 Liter/Stroke Air Pressure psi MODEL Piece Punch & Chisel Set Ball Joint Service Tool Kit and Master Adapter Set Removes and replaces press-fit upper and lower ball joints Forged C-frame press alone can be used to remove and replace universal joints Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles Blow molded case keeps the tools organized and easy to transport. Made of carbon steel Deluxe Air Blow Gun with Angled Nozzle and 1/2 Removable Rubber Tip Air Riveter 3/32, 1/8, 5/32, 3/16 and 1/4 Capacity Drop Forged, heat treated, high carbon steel. Includes: 1 pc center punch, 4 pc pin punches: 13/17 x 6, 4/32 x 5, 1/4 x 6. 5 pc cold chisels: 1/2 x 6, 5/8 x 7, 3/4 x 7, 7/8 x 8, 1 x 8-1/2. 4 pc taper punches: 6/17 x 10, 5/32 x 9, 2/15 x 10, 2/15 x 8-1/ Rivet Capacity 1/4 Overall Length 10-7/8 (280cm) Net Wt. 3-1/2 lbs (1.6kg) Stroke 15mm Motor 1/2 HP Air Inlet Thread NPT 1/4 Air Hose ID Size 3/8 (10mm) Avg. Air Compression 2,320 Liter/Stroke Air Pressure psi Long Angled Nozzle Long Angled Nozzle Long Angled Nozzle (Orange) PR-14 13C Complete with: Torch handle, Cutting attachment, Check valve Torch handle Cutting attachment Check valve Oxygen regulator Acetylene regulator 210 John Dow MODEL FC-25GC 25-Gallon Steel Gas Caddy UL Listed Heavy-duty, UL listed cast iron pump with carbon vanes with two-way operation for either. For use with Unleaded Gasoline, Kerosene, & Diesel fuels. Heavy-duty 10 steel wheels. Fill level gauge. List MODEL PB-12 Parts Return Bags 12in x 22in - Roll Complete Deluxe Welding Outfit 13 pc Metal Cased Bright HSS Drill Set Designed for general purpose drilling under a wide range of operating conditions in various materials. Surface treated with a black oxide finish for abrasion resistance and improved coolant adherence. 1/16 thru 1/4 x 64ths Straight Shank 118 degree Point HSS /4 Heavy Duty Hand Riveter Extra long handles provide excellent leverage Includes 5 nosepieces: 1/8, 5/32, 3/16, 7/32, 1/4 Tool length 20-3/4 7.5HP Cast Iron Air Compressor Two Stage Electric Tank Capacity (Gallons): Power Source: Electric Max Power (CFM): #USA5: 1/2 Cylinder Shaped Double Cut #USC3: 3/8 Cylinder Radius End Double Cut #USC5: 1/2 Cylinder Radius End Double Cut #USD5: 1/2 Ball Shaped Double Cut #USF3: 3/8 Tree Shaped Radius End Double Cut #USF5: 1/2 Tree Shaped Radius End Double Cut Ton Air/Manual Hydraulic Jack Specifications: Capacity: 20 Ton Minimum Height: 9.5 /241mm Maximum Height: 17.8 /452mm Lift: 5.16 /131mm Screw: 3.15 /80mm Air Pressure: psi Net Weight: 40lbs./18kg 169 RCP-7581V US-BK8P 8 pc Contractor Series Carbide Bur Kit #USG3: 3/8 Tree Shaped Double Cut #USL4: 1/2 Taper Radius End Double Cut Plastic Case

3 ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY MODEL Volt Cordless Grease Gun with 2 Batteries 2-Speed transmission provides high-volume grease flow option Versatility means one tool for all lubrication requirements. Transmission: 2-Speed High Volume & High Pressure Grease Flow Indicator: Patented Stroke Counter Hose Type: 30 High Pressure with Dual Spring Guards and 5852 Coupler MODEL 615 Suction Gun Provides fast, clean method for removing and adding transmission and gear oil Has large 20 oz. lubricant capacity and flexible nozzle MODEL 3867 Analog Oil Meter List MODEL Way Loading Lever-Action Grease Gun with 18 Whip Rugged cast pump head. Jam-proof toggle mechanism. Extra-heavy follower spring. Accessible check valve. Precision fit and hardened plunger. 19 List Metering Control Valve For oils, automatic transmission fluids, and antifreeze psi max. operating pressure. 3-1/2 dia. 1/2 FNPT male inlet/outlet. 1/2 male x 1/2 female swivel included. Dial/Digit Totals 60 Quarts, Dial Graduation 1 Quarts, Extension Type Rigid, Antifreeze, Preset Function 685 MODEL :1 Pressure Ratio Stub Pump Assembly Comes complete with bare stub pump, pump cover kit, oil connecting hose, air connecting hose, volume union elbow, 815 air coupler, air nipple and bung bushing. Delivers six gallons of product per min. Ideal for dispensing fluids from drums, tanks or remote standpipe mount. Air Inlet: 1/4 NPT Material Outlet: 1/2 NPT List MODEL 917 Portable Chassis Lubrigun 20 cu. in. air motor requires no oiling during normal operation Holds 120 lb. original refinery container Includes roll-a-round four caster base Supplied with 7 ft. high pressure hose 895 MODEL G401 Lever-Action Barrel Pump Pressurized Used Oil Receiver Designed to provide a safe, affordable option for draining, transferring and evacuating motor oils, as well as transmission and power steering fluids quickly. Offers excellent mobility, easy bowl positioning and simple-to-use pressurized evacuation. Tank Capacity 72.0 Qts./68.1 Lt 219 Fits gal. drums Pump delivers 10 oz. per stroke Comes with standard bung bushing Curved metal spout Corrosive-resistant finish prevents rusting List Drain Bowl Capacity 11 Qts./10.4 Lt MODEL 1147 Heavy Duty Lever Gun 18 Flexible hose with coupler Handy 3-way loading Exclusive Flip over Follower Rugged cast iron head MODEL 740 MODEL 6917 Air-Operated Portable Grease Pump Package Heavy Duty High Pressure Control Valve 7500 psi maximum operating pressure All-steel handle for durability and longevity. Precision control inlet check valve provides ease of handle operation. Trigger guard prevents pinching. Balanced design reduces user fatigue High volume and pressure Smooth, quiet,easy to use Standard follower wipes 120 lb. drum sides clean and keeps the drum primed.package includes: high pressure 50:1 pneumatic pump, high pressure Grease Control Valve, universal swivel and Coupler and 7 hose; drum cover, flexible follower plate and band dolly with wheels. List MODEL G402 Rotary Barrel Pump Cast iron pump for transferring petroleumbased, non-corrosive fluids. Comes with standard bung bushing. Delivers approximately 1 gallon per 18 revolutions of handle. Great for commercial, automotive, farm and industrial applications :1 Pressure Transfer Pump MODEL 535 Gear Lube and Atf Dispenser For use with 120 lbs. container Non-totalizing meter 1/4 PT. Grad. Equipped w/drum cover & 4 caster base Stub pump design. Adaptable for 16 or 55 gallon containers as wells as bulk tank or standpipe installations. Delivers 12.5 cubic inches per cycle. Includes suction tube, bung bushing, air couple and air nipple. Pump Description: stub Pump Body: Alum/Steel/Plastic Wetted or Soft Parts: Buna-N Pump Inlet/Outlet NPT: 1 inch - 3/4 inch Maximum Free Delivery: 14 gpm Air Inlet: 1/4 inch Maximum Rec. Inlet Air Pressure: 150 PSI Typical Automotive Use: Universal/new oil transfer 129 MODEL 877 Metered Control Handle for Oil and ATF Medium Pressure Mechanical Dial Metering Control Valve List MODEL 926 Grease Pump,50 To 1 Equipped with bare pump assembly, 815 air coupler, air nipple, ft. air connecting hose, ft. highpressure grease connecting hose and volume elbow union. Height with drum is 46 in.. Drum and drum cover not included on material and workmanship List MODEL 1162 Air Operated Grease Gun 5862 Universal Coupler Fits all Automotive/Tru-Flate, ARO and Industrial/Milton style nipples for 1/4 ID hose. 300 psi maximum operating pressure, 1/4 female NPT inlet. Maximum airflow 38 scfm at 100 psi. Length 2, diameter 1 1/8, Wt. 4 oz :1 at 150 PSI pump ratio 6,000 PSI max grease pressure PSI pressure range 5.3 lbs Consistent self priming Variable speed trigger 89 MODEL v Cordless Powerluber Grease Gun Complete with case, (2) 12v batteries and charger. Single Speed High Pressure (2.9 oz/min). 3-5 cartridges per charge psi MODEL 1444 Professional 14.4-Volt PowerLuber TM Cordless Grease Gun w/2 Batteries and Carrying Case Two-speed switch for high-pressure or high volume delivery. Cycle indicator pin to monitor grease output. Smart charging system delivers reliable power. Includes grease gun, charger, two batteries and carrying case MODEL 1844 Professional 18-Volt PowerLuber w/2 Batteries Heavy-duty high-torque motor. 18-volt battery delivers up to 10 grease cartridges. High-strength composite body and casting. Next generation Smart Charger for faster charge time. 2-speed transmission. Dual overload protection List List List Replacement Battery # Replacement Battery # Replacement Battery # MODEL x 3/8 Air Reel All Steel construction with 3/8 x 50 rubber hose List MODEL x 1/2 Air Reel Steel with 50 x 1/2 rubber hose and ball stop List Slotted mounting base, easy installation Spring powered automatic recoil 8 position ratchet system, easy positioning of hose 5 position adjustable outlet arm Mini Needle Scaler 5263 Steel housing Air inlet size: 1/4 NPT Hardened steel barrel and piston Recommended hose size: Stroke length: 2.0 (51 mm) 3/8 (10 mm) Bore diameter:.7 (18 mm) (3 mm) Dia. x 5 Blows per minute: 4000 (125 mm) long needles inc. Weight 2.6 lb (1.2 kg) Length: 11.4 (290 mm) Power : 1.0 hp (0.75 kw) Strokes per Minute : 1800 Stroke Length : 0.6 (15 mm) Lockoff Trigger Start Variable Speed Swivel Air Inlet 169 Air Reciprocating Saw Tank Package :1 Oil Pump 1 Stub-Style American made airoperated oil pump works well in over 90% of applications. Quick Lube, Auto Repair Shop, & Car Dealerships all find the Alemite 68 RAM oil pump in operation. For use with all forms of motor oil, transmission fluids, and gear oil. Downtube extra D 1/2 x 50 Oil Reel Heavy Duty open-style oil reel comes with a 50 foot 1/2 inch oil hose. Works in 95% of all applications. Alemite has designed this oil reel so it can be mounted on the ceiling, wall, or floor. Light Duty Right Angle Die Grinder Collet Size: 1/4 in Power Cap.: 1/2 hp Free Speed: rpm Air Consumption: 18 CFM [Max] Pressure: PSIG Inlet Size: 1/4 in (NPT) Hose Size: 3/8 in Length: 7 1/2 in Control Type: Lock-Off Lever Throttle Wt.: 2 lb List 274 QUANTITIES LIMITED 3670 Electric Meter Displays current delivery in quarts and totalizes in gallons. Comes with a hard pipe and a manual non-drip nozzle. Powered by two standard AAA batteries. Rugged and Reliable. Picture shows model B with hard pipe /4 Filter Regulator 1/4 Mini Regulator and Filter/Moisture Separator with auto-dump. Inlet/ Outlet 1/4 NPTF(f) MODEL (7646) Hydraulic Knock-Out Kit Driver with Hand Pump, Draw Studs, Spacer and Plastic Case 895 Includes : 746 UPC Ram (includes following item), 2113B UPC Draw Stud-3/4 IN x 8 IN, 1557AA UPC Punch Sleeve, UPC Draw Stud-3/8 INx 7.9 IN, 1924AA UPC Spacer-Short, 1925AA UPC Spacer-Medium, 1926AA UPC 06904Spacer-Long, 34. Type : Hydraulic Weight : LB (9.100 KG 3400 Fuel Transfer Pump For quick transfer of diesel, kerosene or mineral spirits This versatile pump is designed for use in agricultural, construction, fleet and other mobile applications. The 12-volt DC 3400 quickly transfers fluid from mobile or stationary fuel tanks to vehicles and equipment at a flow rate of 15 gallons per minute Self priming pump with overload protection 30 minute duty cycle Unique, multip-piece telescoping pick-up tube for wide range of tank depths 13-foot commercial grade, no-kink, anti-static hose Standard 2-inch NPT bung fits most tanks and barrels Cast-iron pump with low-friction composite polymervanes V-3 Air/Hydraulic Riveter Sets 1/8-3/16 diameter rivets in all materials. Pulling force: 1,983 lbs.; Stroke:.551 Recommended airline pressure: psi Weight: 3.3 lbs V-4 Air/Hydraulic Riveter Sets 3/32 to 1/4 diameter rivets in all materials Sets T-Rivets/Klik Split, Klik Lock and all other structural blind rivets. 3,055 pound pulling force..562 inch stroke Recommended airline pressure is ps 275 Diaphragm Pumps Air Operated Alemite Diaphragm Pumps are designed for both high volume transfer and dispensing a variety of low viscosity fluids including new oil, used oil, windshield washer fluid, antifreeze, and other materials Air Inlet: 1/4 Body: Aluminum Diaphragm: Buna Pressure: 100 PSI Inlet/Outlet: 1/ Air Inlet: 1/2 Body: Aluminum Diaphragm: Buna Pressure: 125 PSI Inlet/Outlet: 1 3

4 ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY Warranties Return To: SK Hand Tool LLC 1600 South Prairie Drive Sycamore, IL Indexing Head Body Clip Puller Plastic Body Clip & Rivet Removal Kit (Fractional) 3/8 Drive Hex Bits: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 1/2 Drive Hex Bits: 1/2, 9/16, 5/8 SuperKrome finish resists scratches and corrosion. Through-hole design allows for convenient bit replacement. New bit holder design is 9 times stronger SuperKrome finish resists scratches and corrosion. Through-hole design allows for convenient bit replacement 3/8 & 1/2 Drive 9 Pc. Hex Socket Set Indexing head tool locks in 11 positions with 165 degree range of motion to optimize leverage and gain access to hard to reach fasteners. Flush quick-release selector on indexing tool for easy repositioning of pry head. Both tools feature Sure Grip handles for secure grip with greasy hands. Head locks in 11 positions with 165 degree range of motion to optimize leverage and gain access to hard to reach fasteners Flush quick-release selector for easy repositioning of pry head. Indexing feature allows technician to access most ergonomic position. Extended length shaft to gain access in restricted places One tool has the functionality of multiple tools saving the user time Pc. 3/8 & 1/2 Drive Metric Hex Socket Set New bit holder design is 9 times stronger 3/8 Drive Hex Bits: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm 1/2 Drive Hex Bits: 12mm, 14mm, 17mm Flush rivet design decreases tool profile Drop forged and heat treated construction Cutting edged are hand sharpened 7 piece set is made in the U.S.A. Bit sockets feature SK s high polish SuperKrome finish. Through-hole design: simply pop the old bit out and insert a new replacement bit. Holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working.3/8 Drive Hex Bit Sockets - 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 Set Includes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Lowest arc swing in the industry of 1.7 degrees to help work in the tightest spaces Revolutionary 6 pawl technology engages 2 pawls at all times Lifetime Warranty The ratchet system is comprised of six pawls that operate in a clocking mechanism to ensure that two of the pawls are fully engaged with the ratchet teeth at all times The small arc swing enables work in tight spaces that are unavailable to other wrenches 5 Piece General Purpose Pliers Set 7 Pc 3/8 Dr SAE Hex Bit Socket Set % Made in the USA 159 Heavy Duty Sure Grip 5-Piece Screwdriver Set SuperKrome 11 Piece 12 Point Short Combination Wrench Set A FULL LINE OF Because They re Worth It Forged from the finest chrome molybdenum alloy steel. Sockets are laser etched and roll stamped for lasting size recognition. Extends the life of fasteners. Blow molded storage case.set includes metric mm: 14mm, 17mm, 19mm, 22mm and 24mm Poly Low Profile Oil Drain High-impact roto-molded polyethylene construction. Reinforced ribbing provides added support. Long-reach T-Handle makes drain easy to position under the vehicle. T- Handle folds for compact storage. Drain valve is recessed for optimal protection JDI-17PK Pump Kit for JDI-17PLP 110v Electric Pump, 8 Evacuation Hose All Necessary Fittings to Assemble to DOWJDI-17PLP Allows for easier evacuation of fluid. Complete pump kit Both For 1AAA Black Solitaire LED 12 2 Cell AA Flashlight New Ultra Bright - The new Mini Maglite PRO houses a latest-generation LED-a light engine that yields a level of performance that, back in the day, just wasn t possible in a flashlight this size. 22 Black Vinyl Padded Creeper 40 x 17-6 Wheel Powder coated black frame Frame dimensions: 40 x 17 x 4 Cushioned red vinyl cover with adjustable head rest 6 caster wheels: Comes with 16.5 funnel Extends from 34 to 65 Metal trolley comes with 4 casters and pull handle for safe and easier movement around the shop. XL200-S3016 Black LED Flashlight 38 5 modes: high power, strobe, night light, signal, and SOS Creeper body is 2 longer for a better fit. Urethane rollers are inserted into steel bushings which are molded into the creeper body. Provides added strength and easy roller replacement. Low profile, 7/8 floor clearance. Easy to clean surface is resistant to solvents, greases and fuels. Length 38 Width 17 1/2 Height 4 Rated for: lbs. Angled Wrench Set CR-MO alloy steel for long life Lifetime warranty. Canvas pouch included 15 degree and 60 degree angled ends for easy access. Set includes- model number and size in Metric mm: 1426M 26, 1430M 30, 1427M 27, 1431M 31, 1428M 28, , 1429M Flexilla ZillaWhip 3/8in x 5ft. ZillaGreen 18 4 Ton Capacity Porta Power Collision Maintenance Repair Kit Cast Adapters All casting parts are made of nodular cast iron. Plastic Case 10,000 P.S.I. Pump 6 Hose 4 Stroke Ram Wedge Ram (1/2 Ton Capacity) 4, 8, 12 and 16 Extension Tubes Tube Connector All casting parts are made of nodular cast iron. Wheeled Plastic Case 10,000 P.S.I. Pump 6 Hose 6 Stroke Ram Wedge Ram (1/2 Ton Capacity) 5, 10, 14, and 19 Extension Tubes Tube Connector Serrated Saddle Capacity: 300 LBS Ground Clearance: 1.75 Weight: 18 LBS Dimensions: 45.5 L x 25.5 W x H Wheel Size: Blue color finish The Bone(TM) continues to impress with its big 5 inch diameter wheels that roll over just about anything that can be found in a shop, from nuts and bolts to drop cords and floor drains. Durable plastic construction The Rough RiderTM Mechanics Creeper Triple Square Set 1/2 Hand Impact Tool Set HW7031 Unique design delivers over 200 ft. lbs. of shock torque. Can be reversed to tighten. Can also be used with impact sockets. 3/8 drive with 3/8 drive bit holder Rubber Head Wedge Head 90 Degree V Base Flat Base Ram Toe Plunger Toe Rough Rider is made specifically to be used outdoors in less than ideal conditions including dirt, rough pavement and gravel with a firm substrate. Extremely popular with military, police and other government agencies. Capacity: 400 LBS Ground Clearance: Weight: 20 LBS Dimensions: 45.5 L x 25.5 W x H Wheel size: /8 Hand Impact Tool Set 215 Cast Adapters Mechanics Creeper 10 Ton Capacity Porta Power Collision Maintenance Repair Kit NiMh with ANSI Standard Ratings Includes: 12 Volt Auto Adaptor 110 Volt AC Converter Rechargeable NiMh Battery Pack Flashlight Body Mounting Brackets 2 Halogen Bulbs (1 in tail cap) Serrated Saddle Rubber Head Wedge Head Ram Toe Plunger Toe Rubber Faced Flat Base 90 Degree V Base A HW PSI -400F to 1400F 1/4 in MNPT ball swivel x 1/4 in FNPT A Rechargeable Flashlight System 79 Ball Swivel Whip Hose Chisels 59 HFZ3805YW2B Sale MODEL ML125 Mag Charger Yellow Low Profile Plastic Creeper The set includes 5 forks: 11/16, 15/16, 1-1/8, 1-7/16 and 1-5/8. The forks are threaded to interchange with either the handle for hammering or the pneumatic driver (.401 Shank) and a 6-1/4 extension that works with either handle to provide extra reach. The forks are heavy-duty forgings and the handles are heat-treated alloy steel. List Retainers Sleeves Springs Bumpers Chisels and Points for Scalers, Chipping Hammers, Rivet Busters, Paving Breakers and Rock Drills List Length 36 inch 42 inch 48 inch 58 inch Pc. Thick Pickle Fork Set 8 Gallon Polyethylene Waste Oil Drain SP2P01H Mini PRO LED Gives you the ability to focus the beam from a wide-angle floodlight to a narrow spot beam. The high-powered LED but-pound has enough power to light up objects on the far end of a parking lot, and is tiny enough that it can live in your pocket. LED 1 cell AAA Flashlight JDI-17PLP 27 Heat-treated the entire length. Has a cellulose acetate handle which is ergonomically designed. Hardened and tempered the entire length for maximum durability / Pc. Jumbo Metric Dominator Pry Bars /8 Combination Wrench Set SJ3A Number Stamps 7 Pc. Jumbo Fractional CR-MO alloy steel for long life Lifetime warranty. Comes with sturdy metal clip for storage Raised panel design Set includes- model number and size in SAE inches: /16, /4, /8, /8, /2, 964 2, /8 High density drop forged alloy steel for strength. 150 and 600 angled ends for easy access. Comes with convenient metal clips for storage. Includes sizes: 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 Young Bros Jumbo Raised Panel Wrench Set Impact Hex Driver Set CR-MO alloy steel for long life Lifetime warranty Reusable blow molded storage tray Set includes- model number and size in SAE inches: , /16, /8, /16, /4, /8, / Pc. Fractional Angled Head 3/4 Drive Metric Crowfoot Wrench Set Butyrate handle for strength and durability.5 piece Sure Grip Heavy Duty Screwdriver Set provides a sure grip at both ends. The comfortable square handles give you a secure grip even with greasy hands. And the vapor blasted tips grip fasteners effectively. Hex bolster on many screwdrivers lets you generate easy turning power with a wrench Pc. 1/2 Drive Fractional Jumbo Straight piece set is made in the U.S.A., featuring SK s high polish SuperKrome finish.The patented SureGrip wrenching design on wrench box ends, drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners.. Contains: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Wrenches. Packaged in a tray RINGERS GLOVES WE CARRY 100% Made in the USA 12 Pc. 8mm - 19mm X-FrameTM Ratcheting Wrench Set 7 Pc. 3/8-3/4 X-FrameTM Ratcheting Wrench Set Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 ft. lbs. of Shock Torque. Can be reversed to tighten. Can also be used with impact sockets! 1/2 sq. drive with 1/2 drive bit holder; #1, #2, #3, #4 Phillips, and 3/8 straight slot bits. Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes. For head bolts, brake caliper bolts, door handle screws, axle bolts and other applications. The 4 and 5mm bits have 5/16hex drive. The 6, 8, 10 and 12mm bits have 1/2hex drive. The 14 and 16mm bits have 5/8hex drive. The 18mm bit has a 3/4hex drive. The three largest sizes are designed to work on tamper-proof applications. 42

5 Economy Slugger Slide Hammer Set A basic set for the most popular Slugger hooks supplied in a carton without board or metal box. Allows the technician to get started with a quality set at a significant savings with the option of adding other parts in the future as desired The Slugger in a Tool Box 195 ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY Designed for the toughest repair applications. 10 lb. slide weight designed for in-line impact and balanced for continued use without fatigue. Special hand-fit weight for ease of work. The latest and most modern engineered body pulling and pushing attachments. Dual hammer action for reverse or direct reconstruction blows. Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications Rubberized hand hold for good rip and safety. Supplied with lock nut to keep attachments from rotating. All parts are packed in a handy metal tool box which can be locked for security. 60 LED Work Light on Metal Reel with 50 Ft. Cord SL-864 Durability and Safety tested for the toughest situations. Designed in the USA with quality materials. Used in Tactical, Outdoor, Recreation levels. Bright LEDs with 35,000 Hour Life. Impact Moisture and Chemical Resistant Magnet in Body and Top and Hook for Hands-Free Lighting. Heavy-Duty Retractable Metal Reel. Mounting Bracket Included SLR-2166 Multi-Purpose Work Light Rechargeable, Yellow 60 leds rated at 230 lumens arranged in a floodlight pattern and 6 leds in the base of the handle rated at 32 lumens serving as a spotlight Two built-in magnets for hands-free use Magnetic hook for more hands-free versatility Octagonal body design keeps the light in place when laid on its side Flat bottom design allows the light to stand up Dual position magnetic hook-hang vertical or horizontal Spotlight and floodlight ATD Pc. SAE Universal O-Ring Assortment Features: Molded storage case included. (407) professional quality O-rings. Inside diameters from 1/8-2-1/ Bench Grinder w/ Light 5001A 6 in. bench grinder with a bright, flexible work light. Two separate sixinch grit wheels are included: a coarse 36 and a medium 60. Each wheel has a protective spark guard and an adjustable eye shield for maximum safety. Mounting holes and rubber feet allow for stability whether the grinder is mounted or free-standing. 350 lb. Capacity Service Cart lb. Capacity Telescoping Transmission Jack Four 3 swivel caster wheels Low height: 35.5 ; High height: 79.5 ; Saddle tilt forward: 53 0 ; Saddle tilt backward: 30 0 ; Saddle tilt side to side: ; Base size: 35 x SC Efficiency saves you valuable time and money. This service cart brings you and your tools the mobility you crave and flexibility you need. This combination makes for the ultimate cart! It s made with chrome 16 gauge steel frame, with a durable powder coated finish. Replacement parts are available. 3 deep shelves Large, easy to maneuver 4 wheels: 2 locking and 2 standard Load capacity (Lbs.) 350 Height: 35.3 Length: Bench Grinder with Light, 8-In A Comes with two grinding wheels, coarse 36 grit and medium 60 grit. Built in bright, flexible work light. Each wheel has protective spark guard and adjustable eye shield. Cast iron base for durability. Mounting holes and rubber feet Universal Bench Grinder Stand with bench grinder on stand Sturdy base with pre-drilled holes for mounting on floors Use with SUN5001A, SUN5002A and other 6 or 8 bench grinders Efficiency saves you valuable time and money Allows you to be close to your work, allows you and your tools mobility and flexibility 6 in. Utility Vise MODEL 646HD Jaw Width 6-1/4 In., Max. Opening 6 In., Throat Depth 4-3/8 In., Pipe Capacity 1/8 to 3 In., Base Type Swivel, Rotates 180 Degrees, Jaw Type Replaceable Serrated Top Jaw, Built-in Pipe Jaw, Formed Steel Channel Beam and Casting With Large Anvil, Body Casting 30,000 psi MODEL in. Mechanics Vise 6 Jaw Width 5-3/4 Jaw Opening 4-1/8 Throat Depth 64 lbs Ship Weight Jaw width 6 Jaw opening 5 3/4 Throat depth 4 1/8 Kwickstart HD Pro, 12V 360CCA Heavy-Duty Workbench KS400 Heavy-Duty high impact-resistant case with rubber base. Replaceable cables/ field serviceable design. Excellent for job sites, professionals, heavy-duty field use. Exclusive Heavy-duty 22Ah sealed AGM Battery provides powerful Best in Class Performance. Instantly Jump-Starts without another vehicle. Pastisol coated 400 Amp Steel Clamps. UL Listed 12V 600mA Internal charger. Digital LED display with state of charge readings. Built in Digital Voltmete. 12V Power Port and USB Power Port. 12V male-to-male DC Cord Included. Patented List Worktop Capacity 1750 lbs Drawers N/A Shelf Capacity 550 lbs Shelves 2 Length 79 Width Height Shipping Weight 209 lbs 10-Gauge rolled edge steel work top with 2 retaining wall on sides and back (1750 lb load capacity) Two 12-Gauge steel shelves each with a 550 lb load capacity Pipe jaw 1/4-3 1/2 329 MODEL 648HD 8 in. Ductile Iron Workshop Vise 4-1/2 Throat Depth Jaw Width 8, Max. Opening7-1/2, Throat Depth 4-1/2, Pipe Capacity 1/8 to 3, Ductile Iron Jaw Face, Serrated Jaw, Swivel Angle180 Degrees. Overall Length 20-5/8 Overall Height 11-3/8 Overall Width Flexilla 50 ft. Air Hose Max. pressure: 300 psi Temp. range: -40 to 150 F 3:1 safety factor Polyurethane/Polymer Air Hose 35 Inc: Charger and two 12 volt batteries Durable carrying case Delivers up to 8000 PSI No pumping required Holds 14 oz. grease cartridge Worktop Capacity 1750 lbs Drawers 2 Shelf Capacity 550 lbs Shelves 1 Length 59 Width Height Shipping Weight 167 lbs 10-Gauge rolled edge steel work top with 2 retaining wall on sides and back (1750 lb. load capacity) Two key-lock steel drawers with full-extension, ball-bearing slides One 12-Gauge steel shelf with a 550 lb load capacity 1100 lb. capacity Foot pedal-operated table smoothly lifts and lowers engines, transmissions, heavy packages and cargo Lifts 32 x table from 11 to 36 Heavy-duty, all-steel construction with four wheels and two wheel brakes Handle-mounted pressure release Large non-skid platform with wrap-around rubber bumper AFF Lift Table Specifications: Ship Weight 195 lbs. HFZ3850YW2 L1380 Grease Gun Workforce Mega Power 12V Battery Powered Heavy-Duty Workbench 2 Hydraulic Table Cart 1,100 lb. Capacity MECHANICAL GRIP-O-MATIC PULLERS Jaw Order Max Max Screw Size Thickness Width Capacity Style Number Reach (in) Spread (in) (in) (in) (in) & Weight /8 3 ¼ 5/16-24 x 3 7/8 9/64 9/64 1 ton 2 jaw 5 oz /8 3 ¼ 5/16-24 x 3 7/8 9/64 9/64 1 ton 3 jaw 8 oz /8 4 3/8-24 x 4 7/8 upper 3/16 upper 3/16 2 ton 2 jaw 14 oz (rev jaw) lower 1/8 lower 1/ /8 4 ¾ ¾-24 x 4 7/8 upper 3/16 upper 3/16 2 ton 2/3 jaw 1 lb 5 oz (rev jaw) lower 1/8 lower 1/ ¼ 6 9/16-20 x 6 15/16 upper 15/16 upper 15/16 5 ton 2 jaw; 1 lb 12 oz. (rev jaw) lower ¼ lower 1/ ¼ 7 9/16-20 x 6 15/16 upper 15/16 upper 15/16 5 ton 2/3 jaw; 2 lbs 12 oz. (rev jaw) lower ¼ lower 1/ ½ 6 9/16-20 x 6 15/16 upper 5/16 upper 5/16 5 ton, long jaw 2 lbs (rev jaw) lower ¼ lower 1/ ½ 7 9/16-20 x 6 15/16 upper 5/16 upper 5/16 5 ton, long 2/3 jaw; 3 lbs 10 oz (rev jaw) lower ¼ lower 1/ /16-18 x 9 upper 5/16 upper 5/16 7 ton, 2 jaw; 4 lb 8 oz (rev jaw) lower 11/32 lower 11/ ½ 11/16-18 x 9 upper 5/16 upper 5/16 7 ton, 2/3 jaw; 6 lb 2 oz (rev jaw) lower 11/32 lower 11/ ¾ 9 ½ 11/16-18 x 9 11/32 11/32 7 ton, long 2 jaw; 5 lb 6 oz ¾ 11 11/16-18 x 9 11/32 11/32 7 ton, long 2/3 jaw; 8 lb 2 oz /16-16 x 12 9/16 9/16 13 ton, 2 jaw; 10 lb 13 oz ¼ 15 ½ 13/16-16 x 12 9/16 9/16 13 ton, long 2 jaw; 13 lb /16-16 x 12 9/16 9/16 13 ton, 1/2 jaw; 16 lb 4 oz ¼ 17 13/16-16 x 12 9/16 9/16 13 ton, long 2/3 jaw; 18 lb 12 oz ¾ x 13 ½ 13/16 13/ /2 ton, long 2 jaw; 26 lb ½ x 13 ½ 13/16 13/ /2 ton, 3 jaw; 33 lbs ¾ x 13 ½ 13/16 13/ /2 ton, long 3 jaw; 37 lbs ¼ 20 1 ¼-12 x 16 5/8 1 1/16 11/16 25 ton, long 2 jaw; 42 lb 12 oz ¼ 20 1 ¼-12 x 16 5/8 1 1/16 11/16 25 ton, long 3 jaw; 60 lb WE CARRY A LARGE VARIETY OF 1-25 TON MECHANICAL GRIP-O-MATIC PULLERS Torque Wrenches /8 Inch Drive ft lbs Ratchets in only one direction to eliminate wear Rubberized head for greater production. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from percent of capacity. Rugged non-slip metal handles /2 Inch Drive ft lbs Set desired torque on micrometer-type scale by rotating hand grip. Wrench automatically indicates desired torque by feel and sound. Feel and hear a signal when the correct torque is reached. Ideal for jobs where it is difficult to read a dial. Torques left or right and resets in seconds. Accurate throughout entire torque range /4 Inch Drive ft lbs Ratchets in only one direction to eliminate wear. Rubberized head for greater production. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from percent of capacity. Rugged non-slip metal handles ft./lbs. Torque MultiPliers Input 3/4 Output 1 Increases the range of your torque wrench Designed with 4 pinion gears 5

6 ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY MODEL 71233C 2 Ton Double Pump Floor Jack An economical floor jack designed for a variety of automotive shop uses where strength, speed, and dependability are required. Covered by a one year limited warranty. Extremely low 2 3/4 low lift height. Safety by-pass system protects pressure cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Heavy duty chassis for added strength and dependability. Long two-piece handle for easy shipping and storage. Foam handle sleeve is included to protect vehicles from damage. Dual pump piston design raises the jack to maximum height in 8-1/2 pump strokes. U-joint release mechanism for more control. 256 MODEL 81255I 22 Ton Capacity Jack Stands Fleet and maintenance garages where low profile stands are used to support loaded trailers. Pin type support column adjusts to four different height positions. Adjustment pin is secured to stand to prevent loss. Handle provides ease of positioning and carrying. 3/8 thick solid steel base plate for added stability. DIMENSIONS: Low Height 12 High Height 20 Height Intervals 3 x 3 Base Size 10 x 10 Saddle Size 2.25 x 3.25 Shipping Weight 66 lbs Black PSI Air Actuated Hydraulic Treadle Pump User friendly foot-actuated design for easy control. Provides up to 10,000 PSI from standard shop air supply of PSI. Made of durable light weight corrosion-free aluminum. Efficiently operates many industrial and construction. Single acting ram applications List Ton Long Chassis Hydraulic Service Jack Handle actuated release valve provides metered control at any desired lowering speed Wide stance and low center of gravity provide optimum stability under load stress Heavy gauge, steel frame helps prevent distortion and twisting A built-in by-pass device protects hydraulic system from over pumping damage 5-ton capacity Minimum Height: 7 Maximum Height: 27 Handle Length: 42-1/8 P-39 Steel Hand Pump 10,000 PSI Pump Oil Capacity 40 (in 3 ) List WR-5 Single-Acting Hydraulic Spread Cylinder 1-Ton Capacity Jaw width span up to 3.70 List MODEL 72000EI 1 1/2 Ton Transmission Jack Wide chassis with open front provides: Wider opening for saddle and transmission to come lower to the ground for easy removal. Efficient load distribution and stability. Easy access to saddle tilt knobs. Fully adjustable universal saddle with adjustable arms to position the transmission. Heavy duty chain with convenient chain tensioner secures load to the saddle. Safety by-pass system prevents damage to the hydraulic cylinder. Safety overload system prevents jack from being used beyond its rated capacity. Full 360 degree rotating handle operates in any position. Flash chromed ram inhibits rust from entering the hydraulic system. Four full-swivel ball bearing caster wheels for easy positioning. Low Lift Height 7.75 High Lift Height 36.5 Length 45 Width 28 Saddle Size x Shipping Weight 310 lbs MODEL 820C 10 Ton Capacity Portable Air Lift Jack Garages / repair shops of truck, farm equipment, construction equipment and bus companies. May be used in pairs. Ideal for crowded conditions that require single point contact. Three-way heavy duty air valve provides fine control when lifting or lowering a load. Extension tubes and detent pins offer multiple lifting heights. Unit easily maneuvered on two 8 diameter rubber tread wheels. Removable handle and 8 air hose for remote safe positioning and operation. Lifting saddle with serrated surface and locating lugs. Low Lift Height High Lift Height Stroke 11.5 Length 58 Width Height Shipping Wt 178 lbs. Limited Quantities Capacity: 20 Tons Minimum Height: 9 Maximum Height: 19-3/4 Power Raise: 6 Handle Length: 45 Base Size: 8 x 17 Extension Screw: 4-3/4 Operating Pressure: Gross Weight: 6 AERO-MOTIVE 15F Balancer 8-15 Lbs 8-15 lbs./ kg. weight capacity, 8 ft./2.4 m cable travel with ratchet lock. Heavy duty balancers are used to balance or retract a suspended tool or object and are ideal for heavy duty tool, pendant and hose support. The heavy duty balancer has easy tension adjustment, heavyduty steel construction, and has a long lasting mainspring. The FLR models have a ratchet lock Ton Long Chassis Service Jack Handle actuated release valve provides metered control at any desired lowering speed. Wide stance and low center of gravity provide optimum stability under load stress. Heavy gauge, steel frame helps prevent distortion and twisting. A built-in by-pass device protects hydraulic system from over pumping damage 10-ton capacity Min. Ht: 7 Max. Ht: 27 Handle Length: 42-1/8 Saddle Diameter: 7-3/8 5000A 16-Speed Floor UL/CSA Drill Press Heavy duty 3/4 HP motor with 5/8 drill capacity Convenient belt tension lever for quick speed transition Table rotates 360 and pivots from 0 to 45 on each side with indicator to facilitate setting UL and CSA Listed Item Weight 138 pounds Product Dimensions 61.8 x 18.5 x 10.9 inches Power Source corded-electric Voltage 115 volts HW Ton Air/Hydraulic Jack psi. 87 Lbs Compact, powerful design quickly lifts rated capacity. Large 8 rubber wheels. Low height allows lifting from axle or suspension Pressure relief valve prevents overloading. Rapid two-speed air hydraulic action quickly advances ram to load Chrome plated plunger for extended jack life 1295 MODEL 76320A 20 Ton Air Actuated Hydraulic Bottle Jack List min. height, 20.5 max height. with 6.75 stroke. Effortless air operation will greatly reduce operator fatigue and speed up the efficiency of garage work. A compact, yet powerful Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safely. Versatile Quick Connector design provices for easy removal of air hose from air motor allowing compact storage or remote operation. Fingertip remote control for added safety without sacrificing the manual operation. MODEL Ton Capacity Collision / Maintenance Repair Kit (Forged Adapters) A deluxe kit for repairing heavy road machinery, trucks, farm equipment and also used for some heavy construction applications. Kit Weight: 152 lbs. Two steel cases with carrying handles share the weight for easier handling of kit. Two-speed pump quickly raises ram to load and secondary pump provides powerstroke - Threaded Coupler (3) - 5 Extension Tube - Steel Case (1 of 2) - 2-Speed Pump - 5 Hose - 5 Stroke Ram - 3-1/2 Diameter Saddle (2) - Toe Lift - Wedge Head - Vee Head - Steel Case (2 of 2) - 3 Extension Tube (2) - 10 Extension Tube - 20 Extension Tube /2 Extension Tube - 6-1/2 Diameter Base (2) B Ton Porto Power List B Ton Porto-Power List ton Porto-Power set and 10-ton Porto-Power Body Repair Kit has snaplock extension tubes. Automatic pump overload system helps prevent damage to rams and equipment. Flex head features permanently molded rubber pad, interlocked to prevent separation. 1/2-ton capacity spreader has 2in. jaws and spreads from 5/8in. to 3 3/4in. Includes Ton Hydraulic Gear Puller List FREE FREIGHT Features Three-way heavy duty air valve provides fine control when lifting or lowering a vehicle. Automatic safety lock engages in six different height positions independent of air pressure. Designed for lifting entire front or rear of a vehicle. Front swivel caster wheel and two 12-1/4 diameter pneumatic rear tires provide easy maneuverability. Adjustable lifting saddles can be raised and extended to desired position Blow mold case for ease of transportation. CR-MO alloy steel jaws for greater strength and performance. Provides up to 10 tons of pulling force with hydraulic ram. Makes 8 different pulling combinations for total versatility Pulling Force (Tons) plastic tool case. Ram Pump Ram Ram Ram Capacity Capacity Close Hgt Ext Hgt Eff Area GW B ton 8,000 psi /4 1.0 in 2 46 lbs B ton 10,000 psi 13 5/8 19-3/4 2.4 in 2 88 lbs HW Ton Floor Jack List Flanged side-plates. Full swivel rear castors. Sealed hydraulic unit for improved reliability. Automatic valve prevents overloading. Cast iron bell crank for heavy duty loads. In-line pump for easy alignment. U-joint release for exact positioning -Removable one piece Handle: 48 3/4 3 Ton Floor Jack Low height: 9-7/8 High height: 20 1/4 Capacity: 4,000 lbs. List One piece handle. Flanged side plates increase strength Wider for more stability under a load. Large front wheels and rear casters for easy maneuvering. Cast iron pump base for strength and durability.sealed hydraulic pump for durability Pressure relief valve prevents overloading. In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear Easy alignment over performs specifications, long life, designed for the discriminating professional and it s repairable Cast iron lift arm for heavy duty loads U-joint release mechanism for precise load control Min. Height: 4 1/2 MADE IN THE U.S.A. MADE IN THE U.S.A LIMITED PROMO 2 YEAR WARRANTY Max. Height: 20 1/4 Jack Size: 28 1/2 L x 14 7/8 W MODEL Ton Capacity Air Lift Jack INTENDED USE: Truck and farm equipment dealer garages, heavy duty construction repair shops and bus company garages. 3-Stone Sharpening System 225 Flat Body Cylinder Kits with Case Various height magnetic adapters. Perfect for low clearance areas needing a little height boost. Maximum working pressure: 10,000 psi / 700 bar. Carrying case HF0503B 5 Tons HF1005B 10 Tons HF2005B 20 Tons HF3005B 30 Tons Ton Capacity Floor Jack 695 TS22 Long T handle helps in positioning jack under vehicles with low overhang. Jack load release top mounted at T handle and allows operation at any handle position. Handle locking lever secures handle in either vertical, horizontal or 45 degree position. Compact design.rust inhibitive coating on ram and extension screw. Large diameter wheels. Self-retracting ram. Safety by-pass system prevents cylinder damage. Safety overload system prevents jack from being used beyond its rated capacity. Integrated filter protects air motor. Specially designed ram and dust seals help ensure a long service life. Fast lifting air motor. Four removable saddles /2 Ton Floor Jack Ton Capacity Hydraulic Press Features and Benefits: Heavy duty return springs for fast ram retraction Reinforced head plate Arbor plates included Safety bypass valve assures unit will not exceed rated capacity Safe and durable Overall height: 59-3/8 ; base width: 26-3/8 ; hydraulic stroke: 5-3/4 ; press bed width: 22-1/2 x 4. Meets ANSI standard for performance and safety. 495 Ideal floor jack for either a large automotive service center or a one-person shop * One pump to load, three pumps to full height unloaded * Extra-wide lift range from 4.00 to in. * A long, 48 in., spring-loaded handle for rapid return after each pump * Pinned 4 3/4 in. saddle will not lift off during use 5019A 2,200 lb. Capacity Low-Lift Transmission Jack The 8-1/4 inch low height is perfect for aerodynamic trucks with low ground clearance. Swiveling pump handle permits ease of operation in restricted working spaces. Fast-acting pump quickly raises lifting arm. Mounting plate angle is adjusted with the turn of a wrench. Special mounting adapter fits popular Eaton Fuller and RoadRanger transmissions used on nearly all Class 7 and 8 heavy-duty trucks (HWI) Hydraulic Impact Wrench and Drill Torque: gpm ( lpm) Weight: 6.5 lbs (2.93 kg) Length: 8.2 (208 mm) Width: 4.2 (107 mm) Height: 11.0 (280 mm) Hydraulic System: Super Spool Selector for Open and Closed Center Systems Flow Range: 4-12 gpm (15-46 lpm) Optimum Flow Range: 5-8 gpm ( lpm) Operating Pressure: psi ( bar) Pressure Port Thread: 9/16-18 SAE O-ring Return Port Thread: 3/4-16 SAE O-ring 1295

7 Air Hammers Industrial Shank Air Hammer Blows Per Min. List Sale CPT 716 3, Heavy Duty Low Vibration Air Hammer Kit CPT 7110K BPM 3,200 List Sale 108. Air Hammer CPT 7111 Shank Size.401 List Sale 57. Impact Wrenches 1/4 Heavy Duty Air Impact Wrench Ult. Torque List Sale CPT ft. lbs /2 Heavy Duty Air Impact Wrench Ult. Torque List Sale CPT ft. lbs /8 Drive Heavy Duty Impact Wrench Ult. Torque List Sale CPT 724H 200 ft. lbs /4 Super Duty Air Impact Wrench Ult. Torque List Sale CPT 772H 1000 ft. lbs Straight Impact Wrenches RPM List Sale CPT Inch Super Duty Air Impact Wrench RPM List Sale CPT /2-Inch High Torque Impact Wrench, Heavy Duty, Composite Housing RPM List Sale CPT /4-Inch Super Duty Air Impact Wrench RPM List Sale CPT Air Impact Wrench with 6in. Anvil - 3/4in. RPM List Sale CPT Reciprocating Air Saws Super Duty Reciprocating Air Saw Kit Strokes Per Min List Sale CPT 7901K 10, Heavy Duty Reciprocating Air Saw Strokes Per Min List Sale CPT , Heavy Duty Air Nibbler Strokes Per Min List Sale CPT ACE HYDRAULIC AND PNEUMATICS/ACADEMY TOOL SUPPLY Air Screwdrivers Free Speed List Sale CPT 780 Pistol Grip 1800 RPM CPT 782 Straight 1800 RPM CPT 783 Straight 2, Heavy Duty Air Shear Strokes Per Min. List Sale CPT 785S Air Drills 1/4-Inch Reversible Mini Air Drill with Keyless Chuck Free Speed List Sale CPT 7300RQC /8 Air Drill Free Speed List Sale CPT 887 Straight 2, /8-Inch Super Duty Reversible Air Drill Free Speed List Sale CP789R rpm /8-Inch Chuck Air Reversible Angle Drill Free Speed List Sale CPT /2 Air Drill Free Speed List Sale CPT 785H 500 RPM /2-Inch Super Duty Reversible Air Drill Free Speed List Sale CPT 789HR 500 RPM Air Ratchets 1/4 Air Ratchet Ult. Torque List Sale CPT ft. lbs /8 Air Ratchet Ult. Torque List Sale CPT ft. lbs /2 Air Ratchet Ult. Torque List Sale CPT 886H 50 ft. lbs Needle Scalers Needle Scaler BPM List Sale CPT Pistol Needle Scaler BPM List Sale CPT Compact Needle Scaler BPM List Sale CPT Air Scribe BPM List Sale CPT , Sanders RPM List Sale CPT 870 Dual Action CPT 872 Straight 22, CPT 874 Cut Off Tool Mini Random Orbital Sander Kit RPM List Sale CPT 7200S 15, Random Orbital Finishing Sander- 3/32 Orbit- 6-Inch Pad RPM List Sale CPT , Random Orbital Sander-3/16 Orbit 6-Inch Pad RPM List Sale CPT , Heavy Duty Twin Piston Straight Line Sander CFM List Sale CPT Inch Angle Sander RPM List Sale CPT 7269S Pistol Sander High Speed Free Speed List Sale CPT Heavy-Duty Angle Air Polisher - 7-Inch Free Speed List Sale CPT 869P 2500 rpm 239. Grinders CPT 875 Mini 90 0 Angle 22, CPT 876 Mini Straight 30, Mini Angle Head Air Die Grinder Free Speed List Sale CPT 9106QB 22, Heavy Duty 5-Inch Angle Grinder with 5/8-Inch, 11 Spindle RPM List Sale CPT 9121BR Angle Air Grinder Free Speed List Sale CPT Inch Angle Grinder / Cut Off Tool RPM List Sale CPT 7500D 22, C 3/8 Reversible Air Drill 59 Chuck Capacity 3/8 Free Speed 1,800rpm Overall Length 7-7/8 (200mm) Net Weight 2-1/2 lbs (1.1kg) Motor 1/2 HP Air Inlet Thread NPT 1/4 Air Hose I.D. Size 3/8 (10mm) Avg Air Consump 7 cfm Air Pressure psi 527C 1/2 Extra Heavy Duty Reversible Air Drill Chuck Capacity 1/2 Free Speed 500rpm Overall Length 9-1/4 (235mm) Net Weight 4-1/3 lbs (1.95kg) Motor 1/2 HP Air Inlet Thread NPT 1/4 Air Hose I.D. Size 3/8 (10mm) Avg Air Consump 7 cfm Air Pressure psi Ingersoll Rand 2135TIMAX Ultra Duty 1/2 Impact Wrench 780 ft. lbs Drive Size: 1/2 Weight(lbs.): 3.95 Free Speed (RPM): 9,800 BPM: 1,250 Load: 24 Maximum Torque, rev(ft-lbs): 780 Nut Busting Torque (NBT): 1,100 ft-lb Sound dba@ load (Press./Power):.8/ QIMAX 3/4 Drive Impact Wrench 1350 ft-lb maximum reverse torque from a tool that weighs just 7.4 lbs and is compact enough to access tight spaces 1200K NitroCat 1/2 in. Kevlar Composite Air Impact Wrench Min. Hose Size: 3/8 in. (PSI): (BPM): 950 (RPM): 8,000 Torque: ft-lbs. (Working), 1,295 ft-lbs. (Max) 205 CP Lb. Breaker 1 x 4-1/4 Standard hex chuck size 35 lb. class demolition tool. Designed for light-to-medium construction and plant maintenance work. Four-bolt backhead design Heavy-duty fronthead springs. 829 Air Consumption (90 psi): 48 cfm Air Inlet: 3/8 NPTF Tool Only Weight: 44lbs Length: Retainer Type: Kick Latch Air Impact Tools List List PA Aluminum Heavy Duty 1 Pistol Grip Impact Wrench List Anvil Size: 1 Loosening Torque: 1,850 ft-lbs Working Torque: ft-lbs Blows Per Minute: 900 Warranty: 1 Year CP Lb. Breaker 1-1/8 Alloy Steel Forgings - excellent durability Integral oiler - continuous lubrication Heavy-duty front head springs - reduce reaction back to operator Air inlet swivel for easy handling. Improved modern design for excellent durability. CP1260 replaces CP1230 Air Inlet: 3/4 NPT 1-1/8 x 6 chuck Ingersoll Rand 231C 1/2 Super-Duty Air Impact Wrench Exclusive impact mechanism Pressure-feed lubrication Adjustable power regulator Easy to service 2-pc. construction Contoured handle for comfort and control 261 3/4 Super Duty, Air Impact Wrench Jumbo hammer mechanism. Up to 1,000ft.-lbs. of torque. Trouble-free, longer performance aided by Pressure- Feed Lube System. Compact and only 7 5/8 long. Handle exhaust. CP9A Rock Drill Round Shank Chuck 3/4 x 3 3/4 Blows per min.: 3420 bpm Rotation Speed: 189 rpm Air Consumption (90 psi): 20 cfm. Air Inlet 3/8 NPTF Drill rate: 4 in./min. Max Drilling Diameter: 1 Max Drilling Depth: 17.7 Length: Tool Only Weight: 8 lbs Retainer Type: Quick Change Impact Wrench Low wear pin-less hammer 1800 (ft-lb) Maximum torque Combined reverse and power management switch List P Rivet Buster List Open Handle Blows/Minute: 720 Length 26 Auto Stop System Solid Pin on Valve 1/2 Pipe Thread inlet bushing Longer Piston Retainer spring New Rubber Bumpers Teasing Throttle 1/2 air inlet Air consumption: 45 cfm. 285B-6 1 Drive Heavy Duty Impact Wrench with 6 Anvil Adjustable 3 position power regulator provides ultimate power control. Robust 6 vane air motor delivers 1,450 ft./lbs. maximum torque. Free speed: 5,000 RPM Heavy Duty, Air Impact Wrench Handle exhaust directs air away from the work. Top-mounted dead handle. 3-position power regulator 295A 1 Drive 1770, Max Torque Air Impact Wrench Torque range (ft - lb (nm)) ( ) Max torque (ft - lb (nm)) 1450 (1966) Blows per min Ingersoll Rand List ,295 (ft-lbs) Working Torque: ft-lb Blows per Minute: 1,400 BPM 2 Year Manufacturer Warranty Parts and Labor /2 Killer Torque Composite Impact Wrench Impact Wrenches available in short or 6 extended anvils Great Performance Higher Durability Lightweight Dual Action Sander CP7763D ft. lbs. 3/4 Impact Wrench 465 CP7763D ft. lbs. 3/4 Impact Wrench Air Impact Wrench w/6 Extended Anvil 1,912 ft-lbs. of torque in both forward and reverse directions. All-aluminum casing and rocking dog hammer. 6 extended anvil. 3 forward / 3 reverse speeds and an aluminum D-handle for more precise control. Exhaust port directs air away from operator 295 Specifications: Free Speed: 10,000 rpm Noise Level: 82 dba Orbit: 3/16 Average Air Consumption: 2.5 CFM Weight: 2.3 lbs. Profile: 3-3/4 high List Gallon Airoilene Oil 1 gallon container 1-Year parts and labor Airoilene oil is highly refined oil for use in clean tools and air line lubricators 45 Per Gallon 7

8 Keep down time to a minimum with well maintained tools & equipment Specializing in the Repair of Most Major Brands! HYDRAULIC EQUIPMENT cylinders jacks porto powers presses pumps AIR TOOLS drills grinders impacts pavement breakers sanders, etc. LUBRICATION EQUIPMENT grease & oil pumps hose reels meters valves Thousands of genuine replacement parts in stock All Work Guaranteed Estimates Available on Request PRESORTED STANDARD US POSTAGE PAID Syracuse, NY Permit #1263 Complete Service on Hydraulic and Tools HYDRAULIC EQUIPMENT Cylinders, Jacks, Porto Powers, Presses, Pumps American Forge & Foundry Ausco Blackhawk Drednaut Duff-Norton Enerpac American ARO Atlas Copco Buckeye Cleco Dotco ARO Alemite Gray Greenlee-Fairmount Hein-Werner HK Porter Lift-Rite Lincoln Marquette Milwaukee Napa Norco Omega OTC Power Team Ram-Pac FULL LINE OF NEW TOOLS & EQUIPMENT Thousands of Genuine Replacement Parts in Stock All Work Guaranteed Estimates Available on Request Simplex Sunex Templeton-Kenly US Jack Walker Weaver Wheeler Rex AIR TOOLS Drills, Grinders, Impacts, Pavement Breakers, Sanders, Etc. Dynabrade Florida Gardner-Denver Henry Hutchins Ingersoll-Rand Kent Master Power National Detroit Nitto Kobki Sioux St. Louis Sullair Superior Thot Top Cat Unitec Universal Uryu Viking LUBRICATION EQUIPMENT Grease & Oil Pumps, Hose Reels, Meters, Valves Balcrank Graco Lincoln National Spencer Reelcraft Samson Serving the Automotive, Construction & Industrial Market Since 1926 PneumatiVac Operates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs. Compressed air hose attaches at base for stability.includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/ clutch bleeding kit ( No ) for vacuum bleeding hydraulic brake and clutch systems H Abrasive Cleaning Blaster Built-in funnel top. Semi-auto pull-up closure. 70,000 squeezer deadman valve, water extractor, pressure relief valves, air inlet and choke valves. It has an abrasive metering chamber, an operator blast hood, long life ceramic nozzles, hard rubber tires and 10 hose pound capacity 125 psi working pressure. Dimensions: 10 diameter, 25 tank height, 33 overall Lb. Capacity With Type 1 Large Nozzles 10 dia. x 25 h tank on 8 wheels. Has inverted top for easy filling squeezer valve water separator 10 long 1/2 ID abrasive hose 2 ceramic nozzles lightweight hood for face & eye protection 3 semi-automatic pull-up closure air inlet valve choke valve Brass Manifold HVAC Gauge Set for R12/R22/R502 Refrigerant w/3-60 hoses/gauge sz 2 1/2 Heavy duty forged brass body. Large all metal handles are angled for ease of operation. Free-floating piston type valves reduce o-ring wear. Hose holder for convenient storage. Silicone dampened gauges smooth out needle movement Gauges can be easily recalibrated in the field to maintain accuracy. s available for various types of refrigerants shock-resistant gauge protectors. 59 Silverline Elite Automotive Kit Used for one-person brake bleeding. Produces vacuum or pressure at the turn of a switch. Comfortable ergonomic design. One-finger trigger vacuum/pressure release. Pressure and vacuum are created on the squeeze stroke for superior accuracy and control. Includes durable, accurate diaphragm style compound pressure/vacuum gauge. 65 MODEL 8500 TX-1L In-Line Lubricator (3/4 NPT) 52 In-Line Lubricator with 3/4 female pipe threads on both ends. The body is made from cast aluminum and has a 3.7 fluid ounce reservoir. Maximum working pressure is 260 psi., and maximum air flow is 70 CFM at 90 psi. Please note: It is necessary to relieve the air pressure in the reservoir after the lubricator has been disconnected from the air line. Depressurization is necessary to keep the oil in the reservoir from continually flowing when not in use. Nozzle Tip Removes heavy debris and other stubborn objects. The specially engineered nozzle delivers a concentrated force of air to a specific target area efficiently. Recommended inlet pressure is at least 90 PSI and a minimum 1/2 hose is suggested. Air consumption is 135 CFM at 100 PSI. Inlet thread is 3/4. Tub O Towels 90 Count Heavy-Duty Multi-Surface Fresh Scent Cleaning Wipes with Lanolin, Vitamin E, and Aloe Vera S Cannon Extreme High Volume Blow Gun with 48-Inch Extension Safety 179 1/2 Regulator, Filter, Lubricator With Metal Bowl Body Size 1/2 Port Size 1/2 Poly Bowl 4430 Metal Bowl 4431 ACE HYDRAULIC & PNEUMATICS TX-2L In-Line Lubricator (3/4 NPT) S Cannon Extreme High Volume Blow Gun with 24-Inch Extension Safety Nozzle Tip 135 CFM maximum blowing volume at 100 PSI. Removes heavy debris and other stubborn objects. Recommended inlet pressure is at least 90 PSI and a minimum 1/2 hose is suggested. Air consumption is 135 CFM at 100 PSI. Inlet thread is 3/4. MODEL In-Line Lubricator with 3/4 female pipe threads on both ends. The body is made from cast aluminum and has a 11.0 fluid ounce reservoir. Maximum working pressure is 300 psi., and maximum air flow is 70 CFM at 90 psi. Please note: It is necessary to relieve the air pressure in the reservoir after the lubricator has been disconnected from the air line. Depressurization is necessary to keep the oil in the reservoir from continually flowing when not in use. 169 Cooling System Pressure Test Kit Makes automotive cooling system testing simple, efficient, and economical. It combines our unique hand pressure pump with four cooling system test adapters and two dual-function cap test adapters to quickly reveal external cooling system leaks and detect internal leaks and defective caps. 45 Lock Technology LT /8 Drive DEEP WELL 13 Pc Twist Socket Damaged Fastener Removal System LT-4510-D 10mm LT-4511-D 11mm, 7/16 LT-4512-D 12mm LT-4513-D 13mm LT-4514-D 14mm LT-4515-D 15mm LT-4516-D 16mm, 5/8 LT-4517-D 17mm TX-3L In-Line Lubricator (1 NPT) 74 In-Line Lubricator with 1 female pipe threads on both ends. The body is made from cast aluminum and has a 16.0 fluid ounce reservoir. Maximum working pressure is 250 psi., and maximum air flow is 150 CFM at 90 psi. Please note: It is necessary to relieve the air pressure in the reservoir after the lubricator has been disconnected from the air line. Depressurization is necessary to keep the oil in the reservoir from continually flowing when not in use LT-4519-D 19mm, 3/4 LT-4620-D 3/8 LT-4621-D 1 2 LT-4622-D 9/16 LT-4623-D 11/16 List Mag-Tac Crowned Bezel LED Flashlight 3 Modes: Momentary Full Power Strobe 320-lumen beam 12 Hz strobe Liquid Filled Gauges 0-10,000 PSI 2 1/2 Inch Face Starting at Cleco Style 24 Shank Chisel Set Set includes 391, 392, 393, We Carry a LARGE SELECTION of JACK HAMMER & CHISEL BITS TERMS and CONDITIONS: Prices subject to change without notice in accordance with manufacturing costs. We have the right to limit quantities. SUPPLIES MAY BE LIMITED. We are not responsible for typographical errors. All returns MUST be unused and in original box. NO RETURNS ON SPECIAL ORDERS. NO C.O.D. All hand tool warranties must be returned to the factory. FREE SHIPPING on UPS orders of 500 to Central and Upstate New York Only FREE SHIPPING on Truck orders of 750 to Central and Upstate New York Only (Replacement Parts not included)