EXP BEARING ISOLATOR SEPCO BEARING PROTECTION TECHNOLOGY EXPELLER. introducing the... NOW WITH. Quality Fluid Sealing Solutions for Industry.
|
|
- Mervin Chambers
- 5 years ago
- Views:
Transcription
1 Quality Fluid Sealing Solutions for Industry. SEPCO BEARING PROTECTION NOW WITH EXPELLER TECHNOLOGY introducing the... EXP BEARING ISOLATOR
2 FEATURED PRODUCT SEPCO EXP ROTOR Dual Slinger Angled Stator/Rotor Interface Contamination Chambers Provides redundant contamination exclusion capacity Superior contamination resistance in the harshest environments Enables contamination to easily drain providing a great first line of defense against contamination ingress STATOR Adapt seal to machine In combination with the rotor, provides an extremely effective labyrinth barrier to potential oil/ bearing contamination UNITIZING/COALESCING RING Unitizes Stator and Rotor Inhibits vapor ingress CONTAMINATION EXCLUSION SLOT Directly tied to internal chambers COALESCING RING Works in both directions Oil mist ANGLED OIL DRAINBACK Collects oil as it migrates down the shaft Prevents oil leakage utilizing a Drainback Slot INTEGRAL INTERNAL FLINGER Dynamically forces contamination to the Contaminant Exclusion Slot 2 sepco.com
3 OTHER PRODUCTS EXP It is a true non-contact bearing isolator. Utilizing double vertical internal chambers, centrifugal force adds energy to contamination to deflect it away from your bearing housing while effectively retaining lubrication. Two static internal coalescing o-rings exclude vapor ingress by breaking it down and directing it to the contamination exclusion chambers. Can be split for ease of installation. Common applications are pumps, gearboxes, oil mist applications, paper machine rolls, steel rolls and other rotating equipment. EXP-FL Adaptation of the EXP for flange mounted application where pressing the stator is not possible. EXP-PB Same technology as the EXP adapted to the housing of the pillow block specifically fitting the groove for the LER/LOR ring. EXP-GB Designed for applications where a positive seal is required because of flooded conditions. A positive seal is created within the EXP with no parts to wear on your shaft. Common applications are input shafts on gearboxes. EXP-TB Steam turbines coalesces steam before it reaches the bearing housing
4 PRODUCT SPECIFICATIONS EXP The revolutionary HYBRID design of the EXP Bearing Isolator merges proven labyrinth technology with a new generation of EXPELLER technology and allows users to achieve performance levels as never before. Problem - Lip seals wear groove into shaft - Contamination ingresses into bearings during operation - Water gets into bearings during wash down - Steam ingresses into bearings Solution - EXP does not drive rings seal shaft without frictional contact - EXP adds energy to contamination driving it away from bearings - EXP diverts contamination through a vertically oriented labyrinth - EXP coalesces steam - There is no bore to press into - Installation is an issue - EXP can be flange mounted - EXP can be split - The bearing housing is flooded - EXP can create a positive seal without wearing 4 sepco.com
5 Notes
6 Quality Fluid Sealing Solutions for Indus- 123 Airpark Industrial Road Alabaster, AL Phone: (205) (800) Fax: (205) (800) sepco.com
7 EXP Application Data Sheet E G H D I A Ø B Ø C Ø PHONE * Indicate Oil Level Above Company Name: Location: Application: Pump Motor Gearbox Other: Equipment Make/Model: Operating Environment: RPM: Shaft Orentation: Horizontal Vertical Shaft Axial Movement: Shaft TIR: Shaft/Bore TIR: Temperature: F/ C Lubrication: Oil* Grease Oil Mist Circulating Bearing Housing: Solid Split Press-Fit Flange Mount ** Solid Split Material of Const: Bronze S.S. Other: O-ring Material: Viton Other: F Contact: Phone Number: A: B: C: D: E: F: G: H: I: 270 **Number of Bolts: Bolt Size: DBC: Max Flange Dia: Top, 0 Bottom, Step Shaft Shaft Bore Housing Depth Distance to Step Start Distance to Step End Distance to First Obst. Distance to Step or Bearing Radius FAX WEB sales@sepco.com
8 Pillow Block Housing Groove Dimensions D M J I S T G Q C H L R PHONE B Ø A Ø E F O N P K Ø FAX WEB sales@sepco.com Company Name: Location: Lubrication: Oil or Grease Straight Groove Manufacturer: Pillow Block Housing # A: B: C: D: E: F: G: H: I: J: Shaft Internal obst. External obst. Contact: Phone Number: Tapered Groove Manufacturer: Pillow Block Housing # LER/LOR Ring # K: L: M: N: O: P: Q: R: S: T: Internal obst. External obst.
Bearing Isolator Family
Bearing Isolator Family Garlock KLOZURE The best alternative to Radial Lip Seals Leaders in Sealing Integrity Bearing Isolator Family Bearing Isolator Family Garlock KLOZURE Bearing Isolators COMMON INDUSTRY
More informationBearing Protection Eliminate over 50% of bearing failures
Bearing Protection Eliminate over 50% of bearing failures the AESSEAL group of companies designers and manufacturers of mechanical seals, bearing protectors and seal support systems which maximize rotating
More informationPWA ANSI / ASME B73.1 PROCESS PUMP
PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More information340 Series Double Suction Split Case Pumps
340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationSet screw mounted ball bearings
Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art
More informationBROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.
ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationSEALS Control fluid (and/or dust) interchange between two regions with a common boundary Fluid
SEALS Housing (Stationary) Fluid 1(p 1 ) Fluid 2 (p 2 ) Shaft (rotation or translation or stationary) Control fluid (and/or dust) interchange between two regions with a common boundary Liquid Fluid Gas
More informationPWH API 610 SINGLE STAGE OH2
API 6 SINGLE STAGE OH2 API 6 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE Hz Performance Coverage Visit our web site at www.pumpworks6.com and specify flow and performance needs and obtain pump selection,
More informationDODGE E-Z KLEEN and ULTRa KLEEN BaLL BEaRiNGs
DODGE E-Z KLEEN and ULTRA KLEEN Ball Bearings DODGE E-Z KLEEN an d ULTRA KLEEN Ba l l Bear ings For over 125 years, the DODGE brand has been synonymous with the best the industry has to offer. Bearing
More informationTECHNICAL HANDBOOK. Heavy Duty ASME B73.1. Wilfley Sealing Technology. No Flush Water Required
TECHNICAL HANDBOOK Heavy Duty ASME B73.1 A9 Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley Sealing Technology is the premier sealing solution for the toughest pumping
More informationCONTENTS. GRIP TIGHT Adapter Ball Bearings
CONTENTS GRIP TIGHT Adapter Ball Bearings Features / Benefits.................................................... B2-2 How to Order / Nomenclature............................................ B2-4 Selection............................................................
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationFEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
More informationDodge ISN mounted spherical roller bearings
Engineered for reliability and long life Easy to install and remove Factory sealed and greased Patented sealing system for extended life Patented integral adapter mounting and dismounting system No shaft
More informationBROWNING TAPERED ROLLER BEARINGS 900/E920 SERIES. Tapered Roller Bearings PB900 PBE920 FEATURES/BENEFITS
Dimensionally Interchangable with most Type E s Allow for Combination Radial and Thrust Loads Eccentric Lock Collar PB900 Centrap Labyrinth Seal One Piece Ductile Iron Housing Elongated Bolt Holes to Facilitate
More informationMarathon series corrosion resistant products
Marathon series corrosion resistant products Contents 2 Introduction 6 End covers 8 Composite units 22 Stainless steel take-up frames 24 Cast stainless steel units 28 ZMaRC-coated insert bearings Stainless
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationProduct Brochure. E-Z Kleen and Ultra Kleen ball bearings
Product Brochure E-Z Kleen and Ultra Kleen ball bearings We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes
More informationCONTENTS. Setscrew Ball Bearings
CONTENTS Features / Benefits... B4-3 How to Order / Nomenclature... B4-5 Selection... B4-6 Selection/Dimensions Pillow Blocks SC - Normal Duty... B4-12 SCAH Air Handling Normal Duty... B4-16 SCB Normal
More informationSignal Industrial Products Corp.
Signal Industrial Products Corp. COMPANY: FAX NUMBER: ADDRESS: P.O. BOX: MAIL STOP: CITY: STATE: ZIP: COUNTRY: CONTACT: TITLE: PHONE: EXT: ALT. CONTACT: TITLE: PHONE: EXT: NAME OF PERSON SUBMITTING DATA:
More informationA basic layout diagram of a papermaking machine is shown below :
Introduction : A papermaking machine consists of the following sections : A wire and press section (the wet section) A drier section A calender & 4. A reeler A basic layout diagram of a papermaking machine
More informationExtreme Duty mounted ball bearings
3-2 ABB Mounted bearings Metric Features/Benefits The Dodge SC/SCMED Extreme Duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge-only features such
More informationCONTENTS. D-LOK Ball Bearings
CONTENTS Ball Bearings Features/Benefits.................................................. B5-2 How to Order/Nomenclature......................................... B5-4 Selection........................................................
More informationHORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
More informationPremium Type E Mounted Roller Bearing
Rexnord Roller Bearings Rexnord 5000 Series Premium Type E Mounted Roller Bearing Get Your Bearings and Stay on Track Rexnord 5000 Series Premium Type E Mounted Roller Bearings help your equipment stay
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationGÝROL FLUID DRIVES GÝROL FLUID DRIVES SAVE ENERGY HOW GÝROL FLUID DRIVES WORK
GÝROL FLUID DRIVES Gýrol Fluid Drives are used to control speed and to absorb shock and torsional vibration. These extremely robust variable speed hydraulic drives provide a reliable, low maintenance,
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationInstallation Instructions
Installation Instructions CPM Series Dual, cartridge mounted, flexible stator pusher seal designed for general service applications CPM PP Experience In Motion Description The CPM PP seal is a cartridge
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationProduct Brochure. Dodge ISN bearings
Product Brochure Dodge ISN bearings We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes over the total lifecycle
More informationPWM APi 610 BB3 Multistage Pump
PWM APi 610 BB3 Multistage Pump HyDrAUliC PerfOrMAnCe COVerAge FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationInstallation Procedures
For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationIdler Catalogue. Specialist designers and manufacturers of heavy duty conveyor components.
Idler Catalogue Specialist designers and manufacturers of heavy duty conveyor components. Introduction Effective movement of goods and bulk materials demands state of the art technology. Lorbrand has over
More informationPWM. API 610 BB3 Multistage Pump
PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationInstallation Instructions
Installation Instructions Dual Gas Barrier Seals GB-200, GF-200, GX-200, and BufferPac Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly: Lock out
More informationPWM API 610 BB3 Multistage Pump
PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance
More informationService Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
More informationInstallation Instructions
Installation Instructions TM Five Star Seal 80 Series Single, cartridge mounted, flexible stator pusher seal designed for general service applications 84 and 85 Experience In Motion Description The 84/85
More informationBULLETIN January Goulds Model 3700 API th Edition/ISO Process Pumps
BULLETIN 724.1 January 2005 Goulds Model 3700 API-6 th Edition/ISO 13709 Process Pumps Goulds Model 3700 High Temperature/High Pressure Process Pumps Designed to Meet the Requirements of API-6 th Edition/ISO
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationGoulds GIS Series. ISO Frame & Stub Shaft Pumps. Goulds Pumps
Goulds GIS Series ISO Frame & Stub Shaft Pumps Goulds Pumps ISO End Suction Centrifugal Pump - Technical Sales Data The ITT Goulds brand is renowned for manufacturing the highest quality pumping equipment
More informationMAXUM OH1. Heavy-Duty, Horizontal. End-Suction Pump
MAXUM OH1 Heavy-Duty, Horizontal End-Suction Pump MAXUM OH1 Our heavy-duty, horizontal end-suction pump for hydrocarbons and process industry applications. Designed as a foot-mounted version of our API
More informationLabTecta. The 21st Century Bearing Protector PATENT PENDING in over 39 countries.
reliability-focused-solutions.com Reliability Focused Solutions LabTecta The 21st Century Bearing Protector PATENT PENDING in over 39 countries. IMPROVED REDUCED Equipment life Bearing failures Process
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationLabTecta The 21st Century Bearing Protector PATENT PENDING in over 39 countries.
reliability-focused-solutions.com Reliability Focused Solutions LabTecta The 21st Century Bearing Protector PATENT PENDING in over 39 countries. IMPROVED REDUCED Equipment life Bearing failures Process
More informationZE/ZF Process Pump API 610
ZE/ZF Process Pump API 610 Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep commitment to fully understand the needs of our customers.
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Excerpt from Rexnord Bearings Catalog #BR101-100EN Spherical Roller Bearings Units: Rexnord PT Select Series Contents Page Features and Benefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow Blocks
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationFKL Bearings in Vibrating Screens
FKL Bearings in Vibrating Screens Bearings in Vibrating Screens: Vibrating screens are used for grading (i.e. separation of solid materials by grain size) of materials and other vibratory machinery such
More informationEMTEC Series 3-Screw
EMTEC Series 3-Screw Coolant and Emulsion Pumps The reliable pump people Rotary Screw Pumps Performance Shown at 1.8 cst, 3500 RPM Differential Pressure PSI 20-38 20-46 20-56 40-38 40-46 80-36 80-46 140-39
More informationLabTecta The 21st Century Bearing Protector PATENTED AND PATENT PENDING in over 39 countries.
INCORPORATING PRODUCTS AWARDED THE QUEENS AWARD FOR ENTERPRIZE; INNOVATION 2009 reliability-focused-solutions.com Reliability Focused Solutions LabTecta The 21st Century Bearing Protector PATENTED AND
More informationBearing Reference CONTENTS. Guide S-2000
ONTENTS Features / Benefits... B12-2 Specifications........................................................... B12-4 How to Order... B12-4 Nomenclature...........................................................
More informationCEMA D. Continental HC TM. Series
CEMA C CEMA D Continental HC TM Series 20 TROUGHING IDLER 5 DIA. 69AHC501-BW 6 DIA. 69AHC601-BW 35 TROUGHING IDLER 5 DIA. 69AHC530-BW 6 DIA. 69AHC630-BW 45 TROUGHING IDLER 5 DIA. 69AHC542-BW 6 DIA. 69AHC642-BW
More informationXLP RANGE EXTRA LOW PULSE
XLP RANGE EXTRA LOW PULSE POSITIVE DISPLACEMENT AIR BLOWERS SIZE N Design Features XLP Whispair blowers reduce noise and power loss by utilising an exclusive wrap-around plenum and proprietary Whispair
More informationProduct Brochure. Grip Tight ball bearings
Product Brochure Grip Tight ball bearings We provide motors, generators and mechanical power transmission products, services and expertise to improve customers, processes and optimize the total cost of
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationSERVICE MANUAL. Hydraulic Motors type MP- series 4
SERVICE MANUAL Hydraulic Motors type MP- series 4 and Сервизно ръководство Демонтаж Хидравлични мотори Тип GW 2008-2/8 - Service Manual Hydraulic Motor type MP -series 4, - 3 - Service Manual Disassembly
More informationLink-Belt ES Series Idler Rolls
Link-Belt ES Series Idler Rolls Introducing the ES Series Idler Rolls from Syntron Material Handling, specifically designed for extreme service in the harsh environment of oil sands extraction. Link-Belt
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationMounted Spherical Roller Bearings
ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting
More informationSNS End Suction Single Stage Centrifugal Pumps
SNS End Suction Single Stage Centrifugal Pumps SNS Process Pumps Range - Efficiency by Design Sulzer s new SNS pump range has been designed to exceed the highest energy efficiency regulations across all
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More information6 Submersible Motors Standard
Applications These motors are built for dependable operation in 6 diameter or larger water wells. Basic Features Double flanged NEMA mounting design Stainless steel splined shaft StatorShield Franklin
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More information480 Series Vertical Turbine Pumps
480 Series Vertical Turbine Pumps Flows to: 300,000 GPM Heads to: 1400+ Feet Temperatures to: 400 F Compliance to API 610 Standards Upon Request 130 Years of Pump Manufacturing American-Marsh Pumps, one
More informationBRCP6SM ITT. CentriPro. 6-10" Submersible Motors. For 6" and Larger Deep Well Pumps. Engineered for life
ITT BRCP6SM CentriPro 6-10" Submersible s For 6" and Larger Deep Well Pumps Engineered for life Single Phase, 6" s (1.15 S.F.) and Required Control Boxes Diameter F.L. S.F. Control Box HP kw Volts Order
More information6" Single Phase Motors 6-10" Three Phase Motors
TECHNICAL BROCHURE BCP6-10MTR R2 FEATURES SINGLE PHASE: Single Phase, 6 motors available in 5 15 HP, 230 volt models. Require Control Boxes as shown on Order Number chart. THREE PHASE: Three Phase, 6,
More informationPWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationDESIGN CONSIDERATIONS FOR ROTATING UNIONS SEALING TECHNOLOGIES
DESIGN CONSIDERATIONS FOR ROTATING UNIONS SEALING TECHNOLOGIES Rotating unions convey fluid from a stationary supply line to equipment or a rotating tool. They are critical elements in a variety of applications
More informationFey laminar rings as sealing elements for rotating and static sealing applications.
Fey laminar as sealing elements for rotating and static sealing applications. Fey laminar combine a low-contact, multiple labyrinth with extremely small gaps and are therefore particularly effective as
More informationCSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps
CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud
More informationSpecial Duty, Hinged Cap... B Special Duty, Hinged Cap & Traction Wheel... B Pillow Blocks... B6--56
CONTENTS Specialty Tapered Products Features/Benefits Type C... B6--2 Special Duty, Hinged Cap... B6--3 All Steel... B6--4 Specification Type C... B6--5 Special Duty, Hinged Cap & Traction Wheel... B6--22
More informationProduct Brochure. Grip Tight ball bearings
Product Brochure Grip Tight ball bearings We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes over the total
More informationVogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN
Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationTorque-LOCK TM Static Input Brake Service Manual Models: TLH13.
Torque-LOCK TM Static Input Brake Service Manual Models: TLH13. Revised 8/18/2014 While every precaution has been taken in the preparation of this document, Fairfield Manufacturing Co. Inc. assumes no
More informationHeavy Duty Chemical Processing Pump. Model A9
C E N T R I F U G A L P U M P S Heavy Duty Chemical Processing Pump Model A9 Wilfley Model A9 Heavy Duty Chemical Processing Pump A Legacy of Continuous Innovation Arthur Redman Wilfley was an inventor
More informationSlide-Rite & Slide-Rite CR Gearbox
Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES
More informationROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
More informationSeries 40,000 and 70,000 Catenary Belt Conveyor Idlers
Series and 70,000 Catenary Belt Conveyor Idlers Link-Belt Series and 70,000 Catenary Belt Conveyor Idlers combine the proven capabilities of the Link-Belt roll design with the benefits of a catenary suspension
More informationHEAVY DUTY CENTRIFUGAL PUMPS
HEAVY DUTY CENTRIFUGAL PUMPS Supplemental Assembly Manual DryLock 3 Static Seal Cartridge Foreword This manual contains instructions and guidelines for the assembly of the Wilfley DryLock 3 static seal
More informationWilfley. Model. Technical Handbook. ASME B73.1 Chemical Processing Pump
Wilfley Technical Handbook ASME B73.1 Chemical Processing Pump Model A7 Wilfley Model A7 Chemical Processing Pumps Wilfley hydraulic seal in actual operation. ASME B73.1 M-91 Wilfley s Model A7 pump series
More informationRexnord 6000 Series Features SHURloK adapter mount with:
Rexnord Roller Bearings I ZAF STYLE (SAF Replacement) ZAF 6000 No assembly required SAF 20 steps required to install The New Rexnord ZAF Style Roller BeARings Rugged One-Piece, Solid-Base Cast Iron Housing
More informationbrakes WBA1-75-SC Active Hydraulic Disc Brake experienced, global, reliable wind turbine Customer Options Key Features
WBA1-75-SC The WBA1-75-SC has been specifically designed to meet the exacting requirements of Wind Turbine rotor braking applications, where guaranteed stopping and holding performance is required in both
More informationSEALED SPHERICAL ROLLER BEARING
SEALED SPHERICAL ROLLER BEARING McGILL SPHERE-ROL BEARINGS Invented in 1967, SPHERE-ROL bearings utilize a single row of rollers which provide a wide variety of advantages. High capacities, high limiting
More informationEngineering Sealing Systems Training Course for API 682
Engineering Sealing Systems Training Course for API 682 MS Jo/John Crane Korea 18~19 th March 2009 American Petroleum Institute 682 Standard 3 rd Edition & ISO Standard 21049 Introduction Pumps-Shaft Sealing
More informationSPLIT CYLINDRICAL ROLLER BEARINGS
SPLIT CYLINDRICAL ROLLER BEARINGS PERFORMANCE SOLUTIONS RANGE OF HOUSINGS Engineered to perform Standard support with complete housing and bearing Flange support Take up tension unit complete with housing
More informationMSD Axially Split Multistage Pump
Sulzer Pumps MSD Axially Split Multistage Pump The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,
More information