9. Compatibility table for part numbers of different manufacturers
|
|
- Dwight Albert Horn
- 5 years ago
- Views:
Transcription
1 9. Compatibility table for part numbers of different manufacturers 9.1 Bearing unit Type NTN ASAHINACHI NSK FYHKOYO plate covered S-UCP21 SM-UCP21 S-UKP21 SM-UKP21 UCP2C UCP2E UKP2C UKP2E ZUCP2P ZUCP2PE ZUKP2P ZUKP2PE UCP2C UCP2C UKP2C UKP2C C-UCP21 CUCP2C CUCP2C UCP2FC Pillow block Cast iron covered High center Narrow Eccentric collar CM-UCP21 C-UCP31 CM-UCP31 C-UKP21 CM-UKP21 C-UKP31 CM-UKP31 UCHP21 UCUP21 UELP21 CUCP2CE CUCP3C CUCP3CE CUKP2C CUKP2CE CUKP3C CUKP3CE UCPH2 UCPA2 UGP2 CUCP2CE CUCP3C CUCP3CE CUKP2C CUKP2CE CUKP3C CUKP3CE UCPH2 UCPA2 EWP2 UCP2FC UCP3C UCP3C UKP2FC UKP2FC UKP3C UKP3C UCPH2 UCPA2 NAP2 Light cast iron ASPB2 AELPB2 CSPB2 BLLP UBLP2 ENLP2 BLP2 ALP2 plate plate w/rubber ASPP2 AELPP2 ASRPP2 AELRPP2 BPP BPR UBPP2 ENPP2 UBPPR2 Item marked differ from similar products in total ball bearing width. Item marked differ from similar covered bearing unit in total ball bearing width. SBPP2 SAPP2 Continued on next page 59
2 Compatibility table for part numbers of different manufacturers Continued from previous page Type Square flange steel plate covered NTN ASAHINACHI NSK FYHKOYO S-UCF21 SM-UCF21 S-UKF21 SM-UKF21 UCF2C UCF2E UKF2C UKF2E ZUCF2P ZUCF2PE ZUKF2P ZUKF2PE UCF2C UCF2 UKF2C UKF2 Flange Square flange cast iron covered Square flange cast iron cover w/spigot joint Round flange steel plate w/spigot joint Round flange cast iron cover w/spigot joint C-UCF21 CM-UCF21 C-UCF31 CM-UCF31 C-UKF21 CM-UKF21 C-UKF31 CM-UKF31 C-UCFS31 CM-UCFS31 C-UKFS31 CM-UKFS31 S-UCFC21 SM-UCFC21 S-UKFC21 SM-UKFC21 C-UCFC21 CM-UCFC21 C-UKFC21 CM-UKFC21 CUCF2C CUCF2CE CUCF3C CUCF3CE CUKF2C CUKF2CE CUKF3C CUKF3CE CUCFS3C CUCFS3CE CUKFS3C CUKFS3CE UCFC2C UCFC2E UKFC2C UKFC2E CUCFC2C CUCFC2CE CUKFC2C CUKFC2CE CUCF2C CUCF2CE CUCF3C CUCF3CE CUKF2C CUKF2CE CUKF3C CUKF3CE CUCFS3C CUCFS3CE CUKFS3C CUKFS3CE ZUCFC2P ZUCFC2PE ZUKFC2P ZUKFC2PE CUCFC2C CUCFC2CE CUKFC2C CUKFC2CE Item marked differ from similar covered bearing unit in total ball bearing width. UCF2FC UCF2F UCF3C UCF3 UKF2FC UKF2F UKF3C UKF3 UCFS3C UCFS3 UKFS3C UKFS3 UCFC2C UCFC2 UKFC2C UKFC2 UCFC2FC UCFC2F UKFC2FC UKFC2F Continued on next page 60
3 Continued from previous page NTN ASAHINACHI NSK Type FYHKOYO Rhombus flange steel plate covered S-UCFL21 SM-UCFL21 S-UKFL21 SM-UKFL21 UCFL2C UCFL2E UKFL2C UKFL2E ZUCFL2P ZUCFL2PE ZUKFL2P ZUKFL2PE UCFL2C UCFL2 UKFL2C UKFL2 C-UCFL21 CUCFL2C CUCFL2C UCFL2FC Flange Rhombus flange cast iron covered Modified rhombus flange CM-UCFL21 C-UCFL31 CM-UCFL31 C-UKFL21 CM-UKFL21 C-UKFL31 CM-UKFL31 UCFA21 CUCFL2CE CUCFL3C CUCFL3CE CUKFL2C CUKFL2CE CUKFL3C CUKFL3CE UCFA2 CUCFL2CE CUCFL3C CUCFL3CE CUKFL2C CUKFL2CE CUKFL3C CUKFL3CE UCFA2 UCFL2F UCFL3C UCFL3 UKFL2FC UKFL2F UKFL3C UKFL3 UCFA2 Modified flange UCFH21 UCFK2 UCFK2 UCFB2 Eccentric collar UELF21 UELFC21 UELFL21 UELFU2 UELFLU2 UGF2 UGFL2 EWF2 EWFC2 EWFL2 NAF2 NAFC2 NAFL2 NANF2 NANFL2 Light cast iron ASFB2 AELFB2 CSFB2 BLFL UBLF2 ENLF2 BLF2 ALF2 plate ASPF2 ASPFL2 BPF BPFL UBPF2 UBPFL2 SBPF2 SBPFL2 Total width of ball bearings for bearing units marked differs from that of similar NTN products. Item marked differ from similar covered bearing unit in total ball bearing width. Continued on next page 61
4 Compatibility table for part numbers of different manufacturers Continued from the previous page NTN ASAHINACHI NSK Type FYHKOYO Flange plate plate covered AELPF2 AELPFL2 S-UCT21 SM-UCT21 S-UKT21 SM-UKT21 UCT2C UCT2E UKT2C UKT2E ENPF2 ENPFL2 ZUCT2P ZUCT2PE ZUKT2P ZUKT2PE SAPF2 SAPFL2 UCT2C UCT2C UCT2C UKT2C Take-up Stretcher Cast iron covered w/steel frame Hanger plate mini C-UCT21 CM-UCT21 C-UCT31 CM-UCT31 C-UKT21 CM-UKT21 C-UKT31 CM-UKT31 UCHB21 UCL21 UCM21 UCM31 UCT21 ASPT2 AELPT2 CUCT2C CUCT2CE CUCT3C CUCT3CE CUKT2C CUKT2CE CUKT3C CUKT3CE UCECH2 UCTL2WL UCTU2WU UCTU3WU UCT2WB CUCT2C CUCT2CE CUCT3C CUCT3CE CUKT2C CUKT2CE CUKT3C CUKT3CE UCEH2 UCTL2WLA UCTU2WUA UCTU3WUA UCT2WB UBTPU2 Item marked differ from similar covered bearing unit in total ball bearing width. UCT2FC UCT2FC UCT3C UCT3C UKT2FC UKT2FC UKT3C UKT3C UCHA2 UCTL2 UCTU2 UCTU3 UCTH2 SBPTH2 62
5 9.2 Stainless Series bearing unit NTN FYH ASAHI F-UCPM204/LP03 F-UCPM205/LP03 F-UCPM206/LP03 F-UCPM207/LP03 F-UCPM208/LP03 F-UCPM209/LP03 F-UCPM210/LP03 UCP204HIS6 UCP205HIS6 UCP206HIS6 UCP207HIS6 UCP208HIS6 UCP209HIS6 UCP210HIS6 MUCP204 MUCP205 MUCP206 MUCP207 MUCP208 MUCP209 MUCP210 F-UCFM204/LP03 F-UCFM205/LP03 F-UCFM206/LP03 F-UCFM207/LP03 F-UCFM208/LP03 F-UCFM209/LP03 F-UCFM210/LP03 UCFL204HIS6 UCFL205HIS6 UCFL206HIS6 UCFL207HIS6 UCFL208HIS6 UCFL209HIS6 UCFL210HIS6 MUCFL204 MUCFL205 MUCFL206 MUCFL207 MUCFL208 MUCFL209 MUCFL210 Notes 1: Although NTN's Stainless Series bearing units are oilless, lubricated bearing units are also available. 2: When considering use of food grade grease, add "/L596" suffix instead of "/LP03". (Example: F-UCPM204/L596) 3: Bearing units from FYH and ASAHI are lubricated as standard. 9.3 Plastic Series bearing unit NTN FYH ASAHI F-UCPR204/LP03 F-UCPR205/LP03 F-UCPR206/LP03 F-UCPR207/LP03 F-UCPR208/LP03 UCVP204S6 UCVP205S6 UCVP206S6 UCVP207S6 UCVP208S6 No similar unit F-UCFLR204/LP03 F-UCFLR205/LP03 F-UCFLR206/LP03 F-UCFLR207/LP03 F-UCFLR208/LP03 UCVFL204S6 UCVFL205S6 UCVFL206S6 UCVFL207S6 UCVFL208S6 No similar unit Notes 1: Although NTN's standard Plastic Series bearings are oilless, lubricated bearing units are also available. (Standard bearing housings are lubricated.) 2: When considering use of food grade grease, add "/L596" suffix instead of "/LP03". (Example: F-UCPM204/L596) 3: Bearing units from FYH are lubricated as standard. 63
6 Compatibility table for part numbers of different manufacturers 9.4 Ball bearing Type Spherical outer face Cylindrical outer face NTN UC21 UK21 UEL21 AS2 AEL2 CS2 UCS1 UKS2 UELS2 ASS2 AELS2 UC2 UK2 1 UG2 ER B Items marked 1 differ from similar products in total width of ball bearing. Items marked 2 differ from similar products in the width of outer ring. Items marked 3 have no oil inlet. UC2 UK2 EW2 UB2 EN2 CS2 UC2 UK2 NA2 SB2 SA2 SC UR2 UR2 RB2 3 64
7 9.5 Codes for special specifications, etc. Bearing housing Seal Grease Lubrication N N1 G E LLJ LLS Standard Semi-heat resistant HT2 CT1 1 NTN ASAHINACHI FYHKOYO NSK Cast steel 1 (production discontinued) K SC K uctile H4 Gas cut SS400 MP H5 Light ductile Triple seal on both sides (low torque ) Triple seal on both sides (high torque ) L# Alvania Grease 3 Toray Silicone SH44M Toray Silicone SH33L Lubricated ry 1 HR4 HR5 CR2A G00 Alvania Grease3 Superlube No.3 Superlube No.3 AeroShell Grease 7 1 3K2 1K2 2K2 E4 Triple seal Gold No.3 Superlube No.2 Toray Silicone SH41 T3 Toray Silicone SH33M T1 Series products are available to supersede Cast Series products. GOO 65
8 Compatibility table for part numbers of different manufacturers 9.6 Table of NTN and other manufacturers' similar bore code numbers of inch size bearings Nominal shaft dia. inch!/2 (/16 %/8!!/16 #/4!#/16 &/8!%/16 1 1!/16 1!/8 1 #/16 1!/4 Bore dia. mm NTN ) Bore code No. FYHASAHI ) NSK 01-8S 02-9S 02-10S 03-11S 04-12S 05-13S 05-14S 1) 05-15S 05-16S 06-17S 06-18S 06-19S 06-20S 1!/4 1 %/16 1 #/8 1 &/ S 07-21S 07-22S 07-23S 1!/2 1 (/16 1 %/8 1!!/16 1 #/ S 08-25S 09-26S 09-27S 09-28S 1!#/16 1 &/8 1!%/ !/16 2!/8 2 #/ S 10-30S 10-31S 10-32S 11-32S 11-33S 11-34S 11-35S 66
9 Continued from previous page Nominal shaft dia. inch 2!/4 2 #/8 2 &/16 2!/2 2!!/16 2 #/4 2!%/16 3 3!/8 3!/4 3 &/16 3!/2 3 #/4 3!%/16 4 Series 2 Series 3 Series X Bore dia. mm UC UC UCX NTN Bore code No. FYHASAHI ) ) Note 1: Bore code No. above are applicable to the series 2, 3, and X of UC bearings. Example When bore code No. is , the part No. of bearings are as follows. NTN FYHASAHI NSK UC UC UCX05-14 UC205-14S UC305-14S NSK 12-36S 12-38S 13-40S 14-43S 14-44S 15-47S 15-48S 16-50S 17-52S 18-55S 18-56S 19-60S 20-63S 20-64S 2: The bore code No. marked with 2) are of ASAHI products. 3: The inch size bore bearings of AS, AEL, and UEL s are also available. Consult NTN. 67
General index. General technical information. Technical supplement. Pages for refer. Total 56 pages. Technical information of bearings
General index Total 56 pages General technical information T1 T2 T3 Technical information of bearings Technical supplement of bearings Technical information of plummer block housings Technical information
More informationcorporation Bearing Units
For New Technology Network R corporation Bearing Units ^ Dimension Table HOUSING Page Page Page Page Page Page BEARING UCP2 46 UCHP2 66 UCF2 80 UCFC2 104 UCFL2 116 UC2 334 UCPL2 62 UCUP2 70 UCF3 86 Set
More informationSKF ball bearing units UC range. Japanese Industrial Standards compliant ball bearing units
SKF ball bearing units UC range Japanese Industrial Standards compliant ball bearing units Solid design, solid benefits In order to meet the industry s demands of improved protection against contaminant
More informationB L PRECISION BEARINGS RADIAL BALL & M O U N T E D U N IT CATALOG
Catalog No. 0810 Section 1 Deep Groove Ball Bearings Features.............................................2 6000 Series Radial Ball Bearings Extra Light Duty.......................................4 6200
More informationGeneral Bearings BALL BEARING UNITS
General earings LL ERING UNIT all earing Units (contents) Technical section tructure and features... Unit number... Types... 4 election of unit... Life of bearing... earing load... llowable rotational
More informationUCP SUPPORTI RITTI IN PLASTICA - PLASTIC BEARING UNITS
SUPPORTI RITTI IN PLASTICA - PLASTIC BEARING UNITS UCP a h e b s1 s2 g w Bi n UCP 204 20 3/4 127 33,3 95 37,5 11 14 14,2 65,5 31 12,7 0,13 M10 18 UCP 205 25 13/16 7/8 15/16 1 140,5 36,5 105 38 11 14 14,5
More informationCATALOG
www.craft-bearings.com CATALOG The contents of this catalog are subjected to change without prior notice. Every possible effort has been made to ensure that the data here in is correct; however, CRAFT
More informationMOUNTED BEARING UNITS
MOUNTED ERING UNIT NIPPON PILLOW LOCK CO., LTD. CT.NO. fyhbea rin NIPPON PILLOW LOCK CO., LTD. g HED OFFICE om s.c Hirao Mihara-ku akai Osaka - Japan TEL: +--- FX: +---4 www.fyhbearings.com E-mail: info@fyhbearings.com
More informationMOLINE PRODUCT LINE -BOLT PILLOW BLOCK 4-BOLT PILLOW BLOCK 4-BOLT FLANGE PILOTED FLANGE TYPE E TAPERED ROLLER BEARINGS -Bolt Pillow Block: shaft sizes
PRODUCT LINE MOLINE PRODUCT LINE -BOLT PILLOW BLOCK 4-BOLT PILLOW BLOCK 4-BOLT FLANGE PILOTED FLANGE TYPE E TAPERED ROLLER BEARINGS -Bolt Pillow Block: shaft sizes from, 5mm 90mm 4-Bolt Pillow Block: shaft
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationPRODUCT CATALOG BEARING UNITS. In-house Manufacturing. Individually Optimized Bearings. Significant Price Advantage. SIMPLY WELL- ENGINEERED
PRODUCT CATALOG BEARING UNIT I-hou Mufcturig. Iiviully Optimiz Brig. igifict Pric Avtg. IMPLY WELL- ENGINEERED PRODUCT CATALOG BEARING UNIT 4 LFD BEARING UNIT Prouct Ctlog LFD BEARING UNIT Prouct Ctlog
More informationKG Technologies India Private Ltd. Company Profile
KG Technologies India Private Ltd Company Profile KG Group Mr. Kedar Nath Gupta (Founder & Chairman) In a journey of 50 years, we have nurtured progress based on principles, core values and customer focus.
More informationTriple-Sealed Bearings for Bearing Units
For New Technology Network corporation R Triple-Sealed Bearings for Bearing Units @ NTN Triple-Sealed Bearings for Bearing Units These reliable triple-sealed bearings are dustproof and waterproof. They
More informationSelf-Aligning Bearing Units. Discover the NTN-SNR Self-Aligning Bearing Unit Range
Discover the NTN-SNR Self-Aligning Bearing Unit Range EUROPEAN SERIES SNR - European Range (grey cast) EUROPEAN SERIES SNR - European Range ASIAN SERIES SNR Asian Range ASIAN SERIES SNR Asian Range ASIAN
More informationSTOCKIST / AUTHORISED WHOLESALERS ( ALL TYPES OF BEARINGS UNDER ONE ROOF ) CONTACT / / /
STOCKIST / AUTHORISED WHOLESALERS ( ALL TYPES OF BEARINGS UNDER ONE ROOF ) CONTACT - 9840271723 / 044-45011553 / 9677002100 / 044-25231553 SELF ALIGNING BALL BEARINGS 1200 --TILL-- 1222 - FULL SERIES 1300
More informationYours sincerely, Udo Bauer President Schaeffler Asia Pacific
Yours sincerely, Udo Bauer President Schaeffler Asia Pacific Clean power for our future! 2 Schaeffler puts Astraios large-size bearing test stand into operation Clean power for our future! 3 BEARINX online
More informationStandard BALL BEARING with grub screws
all bearing Stanar LL ERING with grub screws MTERIL Rings an balls in chrome steel. sphere Grub screws an protection rings are in steel. Seals in metal with vulcanise NR rubber. Ø coe imensions () K E
More informationKSM MOUNTED UNITS CATALOGUE
MOUNTED UNITS CATALOGUE Tchnical Information Fatur Pags for rfr 8~23 8 2 Lubrication 8~9 3 Tolrancs for Mountd Units 9~4 4 Radial Intrnal Claranc of Barings 5 Slction of Baring Siz 6~2 6 Slction of s
More informationY - bearing units. jedinice
Y bearing units jedinice UPOREDNE OZNAKE Y LEŽAJA I LEŽAJNIH JEDINICA YUnits: List of Equivalent Designations S SY(J) SG ASE P P V SYFJ PA UP U SYF SHE F FY(J) FG56 CF/CJ F F N FYT CFT/CJT FL FL G FYC
More informationTable of Contents. Introduction.. 2. Ball Bearings. 9. Roller Bearings Rolling element linear bearings Plain Bearings..
Table of Contents Introduction.. 2 Ball Bearings. 9 Roller Bearings.... 17 Rolling element linear bearings.. 23 Plain Bearings.. 25 Technical Information. 27 Bearing Units... 38 Introduction of KML...
More informationHINDUSTAN BEARING TECHNOLOGIES. Manufacturer and Exporter of Ball & Roller Bearings. Company Profile. ISO Certified Company
Manufacturer and Exporter of Ball & Roller Bearings Company Profile ISO 9001-2015 Certified Company Website : www.hbtbearings.com Our Vision Be globally recognized as high quality bearing manufacturer
More informationJune 2009 English Version Issue 14.0
B E A R I N G S U P P O R T S June 2009 English Version Issue 14.0 This catalogue presents the Bearing Line an inclues the latest generation of proucts shown in earlier catalogues. This catalogue relates
More informationB.W AND POINTS HITCH LEAF AND DEBRIS BLOWERS
B.W. 3500 AND 4500 3 POINTS HITCH LEAF AND DEBRIS BLOWERS 1 32-34-0030 PTO SHAFT (T60) 1 2 32-55-1040 PTO GUARD "STICKER INCLUDED" 1 3 NC17-46-0018 PLASTIC KNOB 2 4 32-50-1040 BELT GUARD SUPPORT 2 5 32-57-1047
More informationA90 Series Correspondence Lessons PART F. Transmission Bearings
A90 Series Correspondence Lessons PART F Transmission Bearings Lesson A9015 Wide Inner Ring Bearings and Housings Lesson A9016 Plummer Blocks/Housings/Sleeves Lesson A9017 Cooper Split Bearings Lesson
More informationMTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
More informationSPLIT CYLINDRICAL ROLLER BEARINGS
SPLIT CYLINDRICAL ROLLER BEARINGS PERFORMANCE SOLUTIONS RANGE OF HOUSINGS Engineered to perform Standard support with complete housing and bearing Flange support Take up tension unit complete with housing
More informationBEARINGS 4-85 FLUID POWER BELT DRIVES CHAIN DRIVES & HARDWARE LUBRICATION & MAINTENANCE
CONTENTS TheEngineer stoolkit 4-85 FLUID POWER 86-122 BELT DRIVES 123-153 CHAIN DRIVES & HARDWARE 154-182 SEALS 183-194 LUBRICATION & MAINTENANCE 195-224 TOOLS 225-242 CASTORS 243-262 SEALS TOOLS CASTORS
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationGUIDE TO PPL HOUSED UNITS
GUIDE TO PPL HOUSED UNITS As one of the world s leading manufacturers of rolling bearings, linear technology components and steering systems, we can be found on almost every continent with production facilities,
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationSKF FAG Timken NSK NTN
BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection
More informationHOW TO ORDER SPECIAL FINISHES
HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offerings have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 NC13-15-0008 RUBBER STRAP 12" LG 1 2 03-50-0070 FLEXIBLE HOSE HANDLE 1 3 NC01-65-0076 COLLAR (HAS116) 2 4 03-50-0005 GRILL (3 FINGERS) 1 5 01-33-0035
More informationPhone: (800) Fax: (847)
Pon: (800) 882-8642 www.mirins.com Fx: (847) 759-0630 HIGH-TEMP MEDIUM DUTY HEAVY DUTY FREE SPINNING ACCU-LOC NORMAL DUTY SILVER SERIES Mountd Brin Units Grs fittin for rluriction St-scrw mount sown (lso
More informationsolutions for agriculture With You The NTN-SNR range for agricultural machinery
solutions for agriculture The NTN-SNR range for agricultural machinery www.ntn-snr.com With You World no. 3 in bearings Expert in Product Life Cycle Management, NTN Corporation is characterised by the
More informationFeaturing our Corrosion Resistant Series
Featuring our Corrosion Resistant eries Phone: (800) 882-8642 www.amibearings.com Fax: (847) 759-0630 CORROION RITNT FMILY OF PRODUCT PRIM eries (page 12) II 440C tainless teel Insert PT Thermoplastic
More information5 Bearing Load. 5.2 Distribution of Bearing Load. 5.3 Dynamic Equivalent Load Calculation of dynamic equivalent load
5 Bearing Load 5.2 Distribution of Bearing Load Table 5.4 Radial load factor (X) and axial load factor (Y) In order to determine the radial load distribution to each bearing attached to a shaft, use the
More informationBROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.
ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller
More informationLEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.)
LEAF AND DEBRIS COLLECTOR MOD: 4420 (VANGUARD 7.5 H.P.) 1 23-55-0021 NYLON FLAIL BRUSH ROTOR COMPL. 1 2 23-25-2400 ROTOR SHAFT (48 7/8" LG) 1 3 23-22-1400 HAMMER SUPPORT 90 4 NC17-46-0020 NYLON HAMMER
More informationYour Complete Source for Stamped Steel Bearing Housings & Bronze Bushed Bearing Assemblies
STAMPED STEEL BEARING HOUSING SPECIALISTS Your Complete Source for Stamped Steel Bearing Housings & Bronze Bushed Bearing Assemblies Stamped Steel Bearing Housings Bronze Bushed and Plastic Bearings Porous
More informationCONTENTS. D-LOK Ball Bearings
CONTENTS Ball Bearings Features/Benefits.................................................. B5-2 How to Order/Nomenclature......................................... B5-4 Selection........................................................
More informationBROWNING TAPERED ROLLER BEARINGS 900/E920 SERIES. Tapered Roller Bearings PB900 PBE920 FEATURES/BENEFITS
Dimensionally Interchangable with most Type E s Allow for Combination Radial and Thrust Loads Eccentric Lock Collar PB900 Centrap Labyrinth Seal One Piece Ductile Iron Housing Elongated Bolt Holes to Facilitate
More informationTUFF VAC 5000 PTO & GAS
TUFF VAC 5000 PTO & GAS 1 16-50-0000 BODY MOD:PTO "STICKER INCLUDED" 1 N/I 16-50-1000 BODY (MOD.GAS) 1 2 16-50-0005 DEFLECTOR LARGE 1 3 16-50-0010 DEFLECTOR SMALL 1 4 16-03-4800 EXHAUST SCREEN 1 5 16-55-0060
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationBEARINGS AND COMPONENTS
AND COMPONENTS CHAINANDDRIVES.COM.AU INTRODUCTION Introduction Chain & Drives was established to become a leader in Power Transmission. One of our core industries is the Industrial Bearings & Components
More informationRecommended Retail Price List for India
Recommended Retail Price List for India Since 1992... ISO 9001 : 2000 BRAND with VALUES l Zero PPM l Low Prices l JIT Delivery l Sincerity l Transperancy l Honesty in Products in Services MANUFACTURING
More information0 80 OBO 17. 'I'.'il / B (i UC /4 UC
Pillow Blocks with setscrews UCPH2 (Normal-duty) Dimensions r Bolt Size " ~ d h a e b Si S.
More informationHOW TO ORDER/ NOMENCLATURE
HOW TO ORDER/ Setscrew Ball Bearings - Inch HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offering have part numbers with listings shown throughout this catalog. Use of
More informationMounted Spherical Roller Bearings
ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting
More informationGeneral Information. Precision Machine Tool T. Deep Groove Ball Bearings 10. Angular Contact Ball Bearings. Self-aligning Ball Bearings
General Information 1. 2. 3...... 9. Deep Groove Ball Bearings Angular Contact Ball Bearings Self-aligning Ball Bearings Cylindrical Roller Bearings Tapered ed Roller Bearings Four-r -row TaperT apered
More informationKeystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
More informationBESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationFEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
More informationGSZ-6 HSD/KTV/KRS NKZ/GPN. Submersible Slurry Pumps. Amenities from Technology for People and the Earth
Submersible Slurry s S/KTV/KRS NKZ/GPN GSZ- Printe on recycle paper with soy ink - Evience of our coitment to the environment menities from Technology for People an the Earth Innovations that ensure high
More informationReplacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
More informationNU Concentric-LOC BALL BEARING UNITS
NU Concentric-OC B BERING UNIT CTOG NO. EY INTTION HFT CONTCT TRUE CONCENTRIC OCK The FYH NU-OC bearing grips the shaft more uniformly, which allows degrees of equalized locking contact. The roundness
More informationHSD/KTV/KRS NKZ/GPN GSZ-6
Submersible San s S/KTV/KRS NKZ/GPN GSZ- Printe on recycle paper with soy ink - Evience of our coitment to the environment menities from Technology for People an the Earth Innovations that ensure high
More informationProducts Solutions Service. Bearings Chapter 16
Products Solutions Service Bearings Chapter 16 Corporate Lönne Group The Lönne Group was founded in 1949 in Bergen and the present owner and Chairman of the Board, Terje Lönne took over the company in
More informationPARTS LIST BW 3500 TP
PARTS LIST BW 500 TP -57-000 # PART # Qty TITLE NC7--00 BUSHING 0.80'' ID X.0'' OD X 0.0'' 5-55-070 SERIAL NUMBER PLATE CREATION : 5-0-0 REVISION : 9-09-08 ASSEMBLY CASING ASSEMBLY : -57-000 AUTHOR : Page
More informationMaryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
More informationSet screw mounted ball bearings
Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art
More informationThe STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
More informationMARYLAND METRICS presents these product highlights for some of the Bearings and Mechanical Power transmission products that we offer.
MARYLAND METRICS presents these product highlights for some of the Bearings and Mechanical Power transmission products that we offer. CAM FOLLOWERS Inch Full Complement Black Oxide Finish Sealed Sealed
More informationTHE REX DESIGN REPLACEABLE BEARING
Bearings Rexnord Roller Bearings (English-Inch) THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT Can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty,
More informationMarathon series corrosion resistant products
Marathon series corrosion resistant products Contents 2 Introduction 6 End covers 8 Composite units 22 Stainless steel take-up frames 24 Cast stainless steel units 28 ZMaRC-coated insert bearings Stainless
More informationAgriculture Leadership
Agriculture Agriculture Leadership Agriculture customers turn to Timken for products and services that are designed for high performance, extended equipment life and enhanced productivity. Whether you
More informationConveyor Chain for R Rollers
Semi-F Series s R Conveyor for R s KTMS3075-R 100-link Length Conveyor s/ Shaft Collars ions/racks/ (Transport) s ulleys/flanges itch Diameter D Rail contact width S W Width C Thickness T Diameter d Length
More informationSPRING LOADED VENTS. Set Points of 3 PSIG and Above PROTECTOSEAL
SPRING LOADED VENTS Set Points of 3 PSIG and Above PROTECTOSEAL SERIES STYLE 9540 End-of-Line Pressure/Vacuum Breather Vent 19540 Pipe-Away Pressure/Vacuum Breather Vent 9240 End-of-Line Vacuum Relief
More informationBearing Solutions for the Material Handling Industry
Bearing Solutions for the Material Handling Industry TM TM Mounted Units Tailored for the Material Handling Industry Material Handling applications present challenging environmental conditions that demand
More informationReference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
More informationSTRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS
STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationHOOD EXHAUST OR SUPPLY PROPELLER FAN
jtantay 08/10/10 HOOD EXHAUST OR SUPPLY PROPELLER FAN D x D 1 C x C 1 A x A 1 B HINGE BELT DRIVE 0.5 E SECURITY LOCK B1 SHUTTER (Optional) 1 B THROAT SIZE A x A 2 2 CUSTOM CURB (Optional) WOOD OR INSULATION
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled Valve s U Secondary containment system above the bellows Working pressures up to 2500 psig (172 bar) Temperatures up to 1200 F (648 C) 1/4, 3/8, 1/2, 3/4, and 1 in.; 6,
More informationBall bearing units and insert bearings. A supplement to SKF bearings and mounted products (pub # )
Ball bearing units and insert bearings A supplement to SF bearings and mounted products (pub #100-700) TAB OF ONTNTS Ball bearing units nomenclature... 1 Ball bearing units... 2 locking methods... 4 Seal
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationTHE REX DESIGN. RUGGED HOUSING Standard material cast iron. Steel or ductile iron available on request.
THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty, Heavy Duty and Adapter Sleeve mounting to suit
More informationSplit Pillow Block Housings & Accessories
Split Pillow Block Housings & Accessories TABLE OF CONTENTS How to Order and Seal Types for SNN. 2 How to Order and Seal Types for SAFD...3 Features and Benefits of SNN and SAFD. 4 Clearance Adjustment
More information31/05/2013P:\INVENTORY\SLOW\krone\Krone surplus parts31may12 31May13.xls
KR/0030413 D8A PULLEY 1 5.95 KR/1394170 D04A PIN 23 2.48 KR/1396650 D01A WEARING SKID (ALSO 1392990) 9 29.95 KR/1396800 D02A DISC 1 87.36 KR/1398000 D05A BLADE 13 1.78 KR/1398820 D07A TINE LONG (N/T) 10
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationSpecial Duty, Hinged Cap... B Special Duty, Hinged Cap & Traction Wheel... B Pillow Blocks... B6--56
CONTENTS Specialty Tapered Products Features/Benefits Type C... B6--2 Special Duty, Hinged Cap... B6--3 All Steel... B6--4 Specification Type C... B6--5 Special Duty, Hinged Cap & Traction Wheel... B6--22
More informationServing Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
More informationground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE
ground cones Ground Sockets screw thread tubes spehrical joints stoppers tubing connectors universal connectors interchangeable GLASSWARE 2 Cones 1001 Acc. to DIN 12249 form B and in addition to standard,
More informationCONTENTS. IMPERIALt. Impact Spanner Wrench. IMPERIAL Lockplate Kit... B Features / Benefits. IP Pillow Blocks Bolt
CONTENTS IMPERIALt Features / Benefits... B8--2 Nomenclature... B8--3 Selection... B8--6 Selection/Dimensions... B8--14 IP Pillow Blocks -- 2--Bolt IP Pillow Blocks -- 4--Bolt...... B8--14 B8--16 ISAF
More informationBRASS AIR FITTINGS: E-01 RYCO BLOW GUNS BRASS AIRLINE TYRE INFLATORS REGULATORS OETIKER COUPLINGS
RYCO GAUGES NITTO BLOW GUNS TYRE INFLATORS REGULATORS BRASS AIRLINE OETIKER COUPLINGS 70 BRASS AIR FITTINGS & COUPLINGS 72... MALE HOSETAIL (NO P3) SWIVEL HOSETAIL (NO SP3) NUT & TAIL (NO P5) MALE ELBOW
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationECONOMY TWEEZERS. TronexTechnology, Inc Cordelia Rd, Suite 230 Fairield, California USA
ECONOMY TWEEZERS TronexTechnology, Inc. 2860 Cordelia Rd, Suite 230 Fairield, California 94534 USA www.tronextools.com STYLE AA - GENERAL PURPOSE Gold Color Model AA-S2a Model AA-S2b AA S2 Fine General
More informationCONTENTS. Setscrew Ball Bearings
CONTENTS Features / Benefits... B4-3 How to Order / Nomenclature... B4-5 Selection... B4-6 Selection/Dimensions Pillow Blocks SC - Normal Duty... B4-12 SCAH Air Handling Normal Duty... B4-16 SCB Normal
More informationDrawing A Crankcase, Cylinder
Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4241 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal 12x22x7 3 9523 003 0000 2 Grooved ball bearing
More informationCarbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationHT and VHT High pressure pumps
Horisontal type HT and Vertical type VHT The HT and VHT models are multi-stage centrifugal pumps. The number of stages depends on the required head. The number of stages is variable, and the pump running
More informationRS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI The RS Series The RS is our new process duty, horizontal ring section multi-stage pump. Designed for moderate to high pressure pumping,
More informationRobust bearings for vibrating screen applications
Spherical Roller bearings for Vibrating Screens Robust bearings for vibrating screen applications Relubrication holes and groove in outer diameter Long, asymmetrical rollers with precision shaped end faces
More informationRepair Parts Coulter Applicator Repair Parts
Repair Parts Coulter Applicator Repair Parts,000 Gallon Applicator...,000 Gallon Applicator Frame... Pump Kit...0 Injection Coulter Assembly... Knife Coulter Assembly... Tank Plumbing... Knife and Injection
More information