7S Series. Standard Finishes Gray hammer epoxy/polyester pow-der coat. Compliances UL Listed. NEC OSHA
|
|
|
- Mildred Manning
- 5 years ago
- Views:
Transcription
1 -2 7S Continuous Swivel and 7P Portable Series Extension Cord Reelites Furnished with 18-3 (2 wire plus safety ground) yellow SJOOW-A cord. Available with or without handlamps. Applications A safe and convenient source of retractable power cord for portable lighting, power supply, or general utility service. Features: 7S, 7S & 7P Series Enclosed construction, UL listed. Furnished with 25 ft. (7.6m) of yellow, extra flexible, 18-3 SJOOW-A cord (2-conductor plus safety ground). High quality, double copper brushes. Locking ratchet holds cord at desired length. Adjustable ball stop controls return limit of retractable cord. Features: 7S and 7S Continuous Swivel Series Continuous 360 patented swiveling action.. without power interruption or tangling of cord. 7S Series offers choice of handlamps available as accessories. 7S Series includes NEMA 4X (enclosed and gasketed) handlamp to accommodate up to 100W lamp, 20 ft. (6.1m) of SJOOW-A cord. Models available with built-in automatic switch which activates light when cord is pulled out. Convenient flush type mounting ring fits 4 octagonal outlet box or fuse bracket. Accessory bracket permits wall mounting. Features: 7P Portable Series Lead-in cord and 5 amp fusible plug allows fast, portable installation into any convenience outlet. Supplied with handlamp to accommodate up to 100W lamp. Universal mounting bracket allows wall or ceiling mounting. Converts for swinging or limited swivel action. No rewiring necessary for either mounting position. Standard Materials Reels are steel construction. Cord is Type SJOOW-A, yellow thermoset jacket, oil-resistant. 300 volt rating. 7S Series Standard Finishes Gray hammer epoxy/polyester pow-der coat. Compliances UL Listed. NEC OSHA Reels with handlamps are UL Listed. Reels without handlamps are UL Recognized Components. 7S Series 7P Series PAGE 2
2 -3 7S, 7P and 7S Series Extension Cord Reelites Furnished with 18-3 (2 wire plus safety ground) yellow SJOOW-A cord. Meet OSHA Cord Length Rating Catalog Requirements Description Feet/Meters Cord Size Amp/olt Number 7S continuous swivel, grounded Reelite Less handlamp. Max. accessory weight: 20 oz. (560 grams). handlamps available.* Furnished with yellow SJOOW-A cord and RE-FB4 fuse bracket. 25 (7.6m) 18-3 SJOOW-A 4A-125 RE-7S2G RE-7S2G 7P portable with handlamp Portable, plug-in grounded Reelite. Includes handlamp with switch and as illustrated. Accommodates up to 100W lamp. Furnished with yellow SJOOW-A cord and 5 amp fusible plug. 25 (7.6m) 18-3 SJOOW-A 5A-125 RE-7P2G RE-7P2G 7S Reelite with NEMA 4X, indoor use handlamp Continuous swivel, grounded Reelite complete with RE-HL100N (enclosed and gasketed) handlamp as shown.* Accommodates up to 100W lamp. Furnished with yellow SJOOW-A cord. 20 (6.1m) 18-3 SJOOW-A 4A-125 RE-7S2G RE-7S2G 7S Reelite with NEMA 4X, indoor use handlamp and automatic switch Continuous swivel, grounded Reelite complete with automatic switch (not illustrated) and RE-HL100N (enclosed and gasketed) handlamp.* Accommodates up to 100W lamp. Furnished with yellow SJOOW-A cord. 20 (6.1m) 18-3 SJOOW-A 4A-125 RE-7S2G-AS * See accessories page for handlamp description. PAGE 3
3 Series Extension Cord Reelites for Light Tension Duty Furnished with 18-3 and 16-3 (2 wire plus safety ground) yellow SJOOW-A cord. Applications A safe and convenient source of retractable power cord, with positivestop cord locking ratchet. For portable lighting, power supply, or general utility service. Ideal for use where light tension balance service is desired. Features Enclosed construction, UL listed. Exclusive self-aligning cord outlet allows either ceiling or wall mounting. Models with up to 50 ft. (15.2 meters) of 18 gauge yellow SJOOW-A cord, or 25 ft. (7.6 meters) of 16 gauge yellow SJOOW-A cord. (Cord is 2-conductor plus safety ground). Mounts on 4 octagonal outlet box or fuse bracket. Positive-stop cord locking ratchet holds cord at any length, releases easily for take-up. High quality double copper alloy brushes. Adjustable ball stop controls return limit of retractable cord. Standard Materials Reels are steel construction. Cord is Type SJOOW-A, yellow thermoset jacket, oil-resistant. 300 volt rating. RE-1532G RE-1519G RE-1520G Standard Finish Reel: Gray hammer epoxy/polyester powder coat. RE-1519G-1835 RE-1519G-1625 Compliances UL Listed. NEC OSHA Reels with handlamps are UL Listed. Reels without handlamps are UL Recognized Components. Cord Maximum Furnished Length Rating Access. Weight Catalog Fuse Bracket Feet/Meters Cord Sizes Amp/olt Oz./Grams Number Catalog No. 12 (3.7m) 18-3 SJOOW-A 7A oz. (907g) RE-1532G RE-FB7 40 (12.2m) 18-3 SJOOW-A 6A-125 no accessory RE-1519G RE-FB6 35 (10.7m) 18-3 SJOOW-A 5A-125 RE-1519G- RE-FB5 1835* 50 (15.2m) 18-3 SJOOW-A 4A-125 no accessory RE-1520G RE-FB4 25 (7.6m) 16-3 SJOOW-A 6A oz. (680.4g) RE-1519G- not required 1625 * Model RE-1519G-1835 includes handlamp with switch and as shown. PAGE 4
4 Accessories for 7S, 7P and 1500 Series Extension Cord Reelites -5 Max. Lamp Weight Ea. Catalog Description Watts Oz./Grams Number Grounded handlamp with switch and With yellow malamine phenolic handle and deluxe wire metal guard. Use with maximum 16/3 SO or SJOOW-A cord. 100W 15oz. (425g) RE-HL5SRG Grounded handlamp without switch or With yellow rubber handle and vinyl coated wire metal guard. Meets OSHA requirements and NEC 511.4(B)(2) for commercial garages, repair and storage. 100W 20oz. (567g) RE-HL7G Grounded handlamp without switch or With yellow polypropylene handle and guard. Meets OSHA requirements and NEC 511.4(B)(2) for commercial garages, repair and storage. 75W 8oz. (227g) RE-HLG-P Grounded NEMA 4X handlamp without switch or Enclosed and gasketed handlamp with yellow polyester handle and teflon globe. For indoor use only. Meets OSHA requirements and NEC 511.4(B)(2) for commercial garages, repair and storage.- 100W 19oz. (539g) RE-HL100N Wall Bracket Steel wall bracket with gray hammer epoxy/polyester powder coat finish to match reels. For mounting 7S and 1500 Series Reelites on wall. RE-WB1 Fuse Bracket Steel adapter bracket with gray hammer epoxy/polyester powder coat finish to match reels. Brackets are furnished with reels shown, per UL requirements. Fuses are easily changed in field without disassembling reel. RE-FB4 RE-FB5 RE-FB6 RE-FB7 Ball Stop Yellow 2-piece split design permits installation without disconnecting handlamp or on end of cord. Made of polypropylene. Installs on SJOOW-A cord used on all Appleton portable reels. Installed as standard on all extension cord Reelites. RE-PBS-1 PAGE 5
5 -6 Dimensions: 7S, 7P and 1500 Series Extension Cord Reelites 7S Series Continuous Swivel Cat. No. RE-7S2G, RE-7S2G RE-7S2G-AS 7P Series Portable Cat. No. RE-7P2G 5 amp fusible plug 1500 Series Cat. No. RE-1519G, RE-1520G Cat. No. RE-1532G Cat. No. RE-1519G-1625, RE-1519G-1835 PAGE 6
McGill Electrical Product Group puts safety first, producing electrical products and systems to comply with many NEC provisions.
PRODUCT CATALOG 001 While some manufacturers talk about quality and others talk about price, McGill EGS Electrical Product Group's McGill branded products have been upholding a reputation of excellence
WALL & STAND FANS CATALOG
WALL & STAND FANS CATALOG 18 SEMI-INDUSTRIAL WALL AND STAND FANS Ideal for gyms, auditoriums, schools, churches and industrial spaces that need powerful air circulation PRODUCT INFORMATION Motor 3-speed,
Covers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
Instruction Sheet for Powertite Plug, Connector and Receptacle
330087 Instruction Sheet for Powertite Plug, Connector and Receptacle Powertite 200 Amp Pin & Sleeve Receptacles, Cable Connectors and Plugs: NEMA 4X. 600 Volt AC, 250 Volt DC. Wire Recess Diameter:.687.
ABANICOS C. DURAN LOS FLAMBOYANES SHOPPING CENTER 65 TH INFANTERIA AVE. #5 SAN JUAN, PR TEL: ,
ABANICOS C. DURAN LOS FLAMBOYANES SHOPPING CENTER 65 TH INFANTERIA AVE. #5 SAN JUAN, PR 00923 TEL: 787-765-3957, 787-771-9798 EMAIL: WWW.ABANICOSCDURAN@HOTMAIL.COM, ABANICOCDURAN@HOTMAIL.COM Ideal for
Metal Shell Lampholders. FEATURES Molded of heat and impact-resistant urea.
Metal Shell Lampholders Socket Interiors Electrolier Medium Base Lampholders R-3 (27.7mm) 962 1.40" (35.6mm) 940 1.40" (35.6mm) 975 1.87" (47.5mm) 2.35" (59.7mm) 2.0" (50.8mm) Interiors for Medium Base
Hubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
Capacitors. Individual & fixed bank. Individual & fixed capacitor banks. Low Voltage Network Quality
Individual & fixed capacitor banks Low Voltage L O W V O L T A G E N E T W O R K Q U A L I T Y Individual & fixed bank Capacitors Description High reliability Well proven features of ABB dry type power
PLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations where receptacles are used with stationary or portable
Cable Reels. Insul-8 Mobile Electrification
Insul-8 Mobile Electrification Cable & Hose Reels Bar Festoon Pendants Radio Controls Slip Rings Solutions From A Single Source Cable Reels Shown above are cable reels from Insul-8 s PowerReel line. Cable
945 SERIES SERVICE MANUAL
Daniel Woodhead Company A Woodhead Industries, Inc. Subsidiary 945 SERIES SERVICE MANUAL IMPORTANT SAFETY INSTRUCTIONS Please read this manual carefully and follow its instructions. Improper use or failure
Solar Combiner Solutions
Combiner Solutions Built to UL1741 standards NEMA 4X (fiberglass and stainless steel) NEMA 3R (painted steel) Made in America Combiners and disconnects that offer superior resistance and durability from
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
SECTION SIX. Reels. Introduction
Introduction Alemite are often considered the standard in the lubrication industry. Designed with the user in mind, our reels are continually tested and evaluated to ensure our customers are getting a
Spring Driven Cable Reels PowerReel Series
Spring Driven Cable Reels PowerReel Series Contents Spring Driven Cable Reels 3 Specification Data Sheets 4-5 PowerReels, 1200 Series 6-9 PowerReels, 1400 Series 10-13 PowerReels, 1900 & 2400 Series 14-15
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
NEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:
Plastic Ceiling Receptacle Lampholders
R C US Plastic Ceiling Receptacle Medium Base 250W 250V Plastic Ceiling Receptacle R-1 4.56" (115.8mm) 1.59" (40.4mm) S1174W 4.63" (117.6mm) 1.52" (38.6mm) Molded of high-temperature, thermoset plastic
G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations
1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs
DBR Receptacle Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG
EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. EBR Receptacle Class
Options. Pole and Arm. Suitable for wet locations
Catalog number: / / / Mtg. Fixture Electrical Module Finish See page 2 See page 3 Options Pole and Arm Select pole from Kim Arms and Poles Selection Guide. If pole is provided by others indicate O.D. for
SD Series. Cord and Light Reels. Engineered Solutions to Help you Work Smarter and Faster. Quality Cord and Light Reels
SD Series Cord and Light Reels Engineered Solutions to Help you Work Smarter and Faster Quality Cord and Light Reels Organize your work space for a safer, more productive work environment. Make Graco your
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
DRILL CORD. Insulation Nominal Size. Approximate Amps Anixter. Number Number Thickness O.D.
DRILL CORD Synthetic Rubber Insulation 75 C, 600 Volts For use on drills and other mining equipment. For use on circuits not exceeding 600 volts at a maximum conductor temperature 75 C. 1. CONDUCTOR: Flexible,
INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATION AND OPERATING INSTRUCTIONS MANUAL TRANSFER SWITCHES FROM 0 Residential Wattage Requirements Appliance Running Watts Add watts for starting Furnace blower, gas or fuel 1/8 hp 300 500 1/8 hp
Individual & fixed bank capacitors
Individual & fixed bank capacitors L O W V O L T A G E N E T W O R K Q U A L I T Y Description High reliability Well proven features of ABB dry type power factor cor rection capacitor tech nology are incorporated
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Electric Vehicle Charging Station Products Charge Cable Management Solutions
30ft Cable Length Self-Retracts Electric Vehicle Charging Station Products Improved Safety EVoReel reduces trip hazards and likelihood of connector damage. The EVoReel brand promotes OSHA and ADA regulations
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Climate Control Products
Products Filter Fans NEMA 1 Box Fan High airflow with low noise operations makes these versatile packaged fans very popular in a wide range of applications. Reversible mounting brackets allow user to push
A. General: Deliver, store and handle wire and cable in accordance with the manufacturer's instructions and as specified in Division 1.
SECTION 16120 WIRES AND CABLES 600 VOLTS AND BELOW PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing all wires and cables rated at 600 volts and below for complete electrical systems
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
EPOXY POWDER COATED COPPER FREE ALUMINUM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AJA510 Alum MTG Unilet Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features
DIVISION 16 - ELECTRICAL SECTION 16xx0 MANUFACTURED WIRING SYSTEM ACCESS FLOOR
DIVISION 16 - ELECTRICAL SECTION 16xx0 16xx0-1. GENERAL MANUFACTURED WIRING SYSTEM ACCESS FLOOR The modular convenience power system ensures the electrification and delivery of power from the power panels
CLASS # GAUGE ROUND POWER CORDS
16 GAUGE ROUND POWER CORDS These 16 gauge, 3 wire orange power cords will stay flexible down to -40. They feature a heavy duty double vinyl jacket insulation and molded male and female ends. The cords
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
PLUGS AND RECEPTACLES: NEC/CEC HAZARDOUS LOCATION
DBR 30, 60, 100 and 150 Amp Series Receptacles Explosionproof, Dust-Ignitionproof With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. 600 Vac Max. 250 Vdc Max. Applications Locations
INSULGRIP Plugs and Connectors
INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors Technical Information HBL5266C HBL5269C INSULRIP Plugs and Connectors Specifications Plug Part Description Typical Specification Catalog No.
P hoenix Products introduced loading dock lighting to the
INDEX PAGE Standard Modular docklite 2-5 Accessories 6 Operating Cost Comparison 7 Impact-Resistant docklite 8 Wet-Location docklite 9 Explosion-Proof docklite 10 Dimensions 11-12 Overhead Pull-down docklite
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Kaleidoshade 2 Series
Type No. Catalog No. Job. Name Kaleidoshade 2 Series APPLICATIONS Ideal for restaurants, taverns or nightclubs, food courts, atriums or plazas, malls, retail outlets, stores, athletic clubs and facilities,
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
4-Liter Laboratory Blender and Accessories
4-Liter Laboratory Blender and Accessories Capacity: 4 liters Switch Settings: Off - Lo - Med - Hi - Pulse RPM: Hi-20,800, Med-18,000, Lo-15,800 Rating: 120 volts - 50/60Hz - single phase - AC - 15 Amps
Cable Reel 0951, 200, 300, 400, 228BH Series Service Manual
AERO-MOTIVE COMPANY A Woodhead Industries, Inc. Subsidiary Cable Reel 0951, 200, 300, 400, 228BH Series Service Manual IMPORTANT SAFETY INSTRUCTIONS Please read this manual carefully and follow its instructions.
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1 Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable
ARL2042 Receptacle. Long Description. Manufacturer Information PLUGS & RECEPTACLES GTIN Manufacturers Part Number UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 ARL2042 Receptacle Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Descriptions
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
I With Reflector 104-R 118-R. With Switch with Receptacle
Industrial Duty Handlamps Lamp Guards for 7 and 9 Series Handlamps Closed End Wire Guards No Reflector 104 118 104-I With Reflector 104-R 118-R 118-I Open End Wire Guards No Reflector 107 107-I 119 With
PRODUCT CATALOG. Safety. Reliability. Performance.
38 PRODUCT CATALOG Safety. Reliability. Performance. TABLE OF CONTENTS PORTABLE LIGHTING Specialty Lighting... A-4 Hand Lamps...A-12 Wide-Area Lighting...A-24 Stringlights...................... A-32 REELS
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
50,000 cycles minimum, resistive, inductive, tungsten filament lamp load (Fed Spec) 1.753" Depth x " Width x 2.375" Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 7842 40A 600V 2P Switch Pass & Seymour/Legrand Catalog Number 7842 Manufacturer Pass & Seymour/Legrand Weight per unit
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
Instructions for Installation, Operation and Maintenance of: "WSRD" Interlocked Receptacles 30, 60 & 100 Ampere
331114-1 INSTRUCTION SHEET Instructions for Installation, Operation and Maintenance of: "WSRD" Interlocked Receptacles 30, 60 & 100 Ampere Read instructions carefully and with full understanding for safe
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
Low Voltage Products. Low Voltage Capacitors Power Factor Correction Solutions
Low Voltage Products Low Voltage Capacitors Power Factor Correction Solutions Low Voltage Capacitors Reliability for Power Factor Correction Dry type design The ABB Low Voltage Capacitors, called CLMD,
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically operated devices
PlexPower Fused Factory Sealed Panelboard with Bus Bar Up to 30 Amps. Stainless Steel Enclosures
Applications The PlexPower panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries Wastewater
INTEGRID TRACK (120V) SPECIFICATIONS
INTEGRID TRACK (120V) SPECIFICATIONS GENERAL Integrid Track shall be a combination Track and main runner for mech - anically supporting suspended ceiling systems. Integrid Track shall allow fixtures to
Spring Steel Fasteners
Cable Hooks Spring Steel Fasteners Supports all category 5/5e/6, fiber optic, innerduct and low voltage cabling requirements Finish is Pre-Galvanized Steel Exclusive Qwik-Latch cable retainers provide
INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING PORTABLE POWER CABLES
INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING PORTABLE POWER CABLES 37- TYPE G-GC 3/C HEAVY-DUTY EASY-STRIP JACKET 000 VOLTS FEATURES Highly durable, abrasion-resistant CPE jacket specially designed
CABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
Linear Fluorescent Highbays. A comprehensive selection of high output commercial/industrial fluorescent lighting
Linear Fluorescent Highbays A comprehensive selection of high output commercial/industrial fluorescent lighting Linear Fluorescent Highbay Lighting T-Series Full Body, Specification Grade Fluorescent Highbay
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
ACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP1034CD 100A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number ACP1034CD Manufacturer Appleton/Oz Gedney
Induction Compact Fluorescent HID LPQ. Canopy Luminaire
Induction Compact Fluorescent HID LPQ Canopy Luminaire LPQ Series Lighting For Life Featuring the Philips QL Induction Lighting System 100,000 Hours of Operation Very Low Maintenance Efficient Operation
Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles
Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use
Solar Combiner Solutions
Solar Combiner Solutions Providing combiners and disconnects that offer superior resistance and durability from harsh weather and abusive solar environments Solar Technology Leading the way in Solar Technology
LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
Woodhead. Industrial Electrical Selection Guide. Balancers Electric Reels Hose Reels Mobile Electrification
Industrial Electrical Selection Guide Balancers Electric Reels Hose Reels Mobile Electrification Reels Hand Wind Reels Hand wind reels are designed for heavy-duty industrial storage applications. Perfect
Cutler-Hammer. January 2001
Vol. 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed to provide circuit protection for low voltage distribution systems.
Optional Bullard Hook* with return latch, with or without return spring, for added safety.
Standard Top Hook with safety latch-rigid (standard) or swivel. Optional Bullard Hook* with return latch, with or without return spring, for added safety. Optional Shur-Loc Hook* with positive lock latch
CLIMAGUARD Outdoor Heat Exchangers
Product Overview : CLIMAGUARD Outdoor Heat Exchangers TX23 Model TX38 Model TX52 Model 132 Product Overview : Lab- and field-tested to seal out extreme weather CLIMAGUARD Outdoor Heat Exchangers PRODUCT
ACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 ACP6034BC 60A 3W4P P&S Plug (600VAC/250VDC) Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
Consider The Possibilities...
FS/FD Air-Cooled Fluid Cooler Catalog 710.1 Consider The Possibilities... Cools most any non-corrosive fluid Closed-circuit cooling avoids contamination Cold weather economizer for interior cooling loads
Chapter 8 Interior Wiring and Lighting
Chapter 8 Interior Wiring and Lighting Review Questions 1. What tool if any, is used to remove a fuse that is to be replaced? 1. Pliers 2. Screwdriver 3. Fuse puller 4. None 2. OSHA has established specific
Communication & Low Voltage. Communication & Low Voltage
145 Communication & low Voltage Cable Supports cable ties up to 9 /32" wide from flanges 1 /16" to 3 /4" thick. 8" cable tie included. Simply installed with a hammer. BE Series BF Series 78101119970 BE-2-4-CT2
GE Push Buttons. CRW4P Heavy-Duty Push Button Contact Blocks
CRW4P Heavy-Duty Push Button Contact Blocks CH104P Heavy-Duty Push Button Contact Blocks CR104P Heavy-Duty Push Buttons ~\ GE Push Buttons CRW4P Heavy-Duty Push Buttons 600 Volts Maximum AC/DC 10 Amperes
Arktite Heavy Duty Circuit Breaking Plugs and Connectors
Arktite Heavy Duty Circuit Breaking Plugs and Connectors 60 A, 600 VAC/250 VDC, 50**-400 hertz Dimensions Page 968 1P Plug Connector Mating APJ Plugs Mating APR Connectors Style 1 Description Cat. # Dia.
Power factor correction Harmonic filtering Dynamic flicker compensation
Power factor correction Harmonic filtering Dynamic flicker compensation Products & Systems.1 1SXU 000 023 C01 General information General description & capacitor construction Large terminals for easy cable
T CLASS T FUSE BLOCKS
Ferraz Shawmut Fuse Blocks accommodate fuses up to 600A. Insulators are either of durable, glassfilled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Ferraz Shawmut
CONTROLLIX CORPORATION CONTROLLIX.COM LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS
LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS I. SCOPE a. This specification describes the necessary requirements for the design, fabrication, and operation of automatically switched, low
Explosion Proof Drop Light - 12 Volt AC/DC Watt Incandescent - 25' Cord - Twist Lock Plug
Explosion Proof Drop Light - 12 Volt AC/DC - 100 Watt Incandescent - 25' Cord - Twist Lock Plug Part #: EPL-DL-12-25 Made in the USA The Larson Electronics EPL-DL-12-25 Explosion Proof Hand Lamp is U.L.