POLICIES. PA Sales Tax: Anyone living in the state of Pennsylvania must pay 6% sales tax unless a tax exemption certificate is on file with us.
|
|
- Dominick Watkins
- 5 years ago
- Views:
Transcription
1
2 POLICIES Location & Visitation Policy: We are located just off of Route 74 about three miles north of the town of Carlisle. Shop visitation is by appointment only, so please call before you visit. We will work with you around your schedule as we are available on evenings and weekends. To Order: You can call your order in at You can fax your order in at You can your order to Payment Methods: We accept Cash, Check, Visa or Mastercard as payment. Credit cards that are declined are subject to a fee. Bounced checks are subject to a $30.00 bank charge fee. PA Sales Tax: Anyone living in the state of Pennsylvania must pay 6% sales tax unless a tax exemption certificate is on file with us. Shipping: We ship all of our packages UPS Ground. We can use a faster shipment method through UPS if requested. We pride ourselves in fast shipping. Orders will usually ship within 24 hours of receipt. Backorders: Our goal is to ship your order complete. If an item is unavailable at the time of shipment, the item will be shown on the order as backordered. The item then will be shipped to you as soon as possible. No backorders will be cancelled unless you advise us. Returns & Exchanges: If you plan on returning an item, we ask that you notify us beforehand. Returns can be made for store credit only. Special ordered items are not subject to return. There are absolutely no refunds on shipping charges, and the buyer is also responsible for paying the return shipping. Pricing: Our pricing is subject to change at anytime without notice. Warranty: There is no warranty, either expressed or implied, with respect to any of the products provided by Fastener Specialties. All products and their respective parts are sold as is and with all flaws. The user shall assume all responsibility and risks associated with the purchase or use of any products supplied by Fastener Specialties. The user shall also determine the suitability and safety of the product for its intended use. Fastener Specialties will not be liable for any loss, damage, injury, or death resulting from the use of any of our products. FASTENER SPECIALTIES 45 Pleasant Hall Road Carlisle, PA Call us at Fax us at us at fastspec@centurylink.net Visit us on the web to view our FULL online catalog!
3 Racer s Standard Steel Rod End Pack RE-M-PK-6 RE-M-PK-7 When you purchase a rod end pack, you are getting the jam nuts for free! (6) 3/8" Right Hand Rod Ends with Jam Nuts (6) 3/8" Left Hand Rod Ends with Jam Nuts (6) 7/16" Right Hand Rod Ends with Jam Nuts (6) 7/16" Left Hand Rod Ends with Jam Nuts 3/8 Hole x 3/8-24 Shank Male Rod Ends RE-CM-6 Commercial Steel Silver Right Hand RE-CML-6 Commercial Steel Silver Left Hand RE-JM-6 Premium Steel Gold Right Hand RE-JML-6 Premium Steel Gold Left Hand RE-ALJM-6 Aluminum Red Right Hand RE-ALJML-6 Aluminum Red Left Hand RE-KMX-6 High Strength Alloy Silver Right Hand RE-KMXL-6 High Strength Alloy Silver Left Hand 3/8 Hole x 7/16-20 Shank Male Rod Ends RE-CM-7-6 Commercial Steel Silver Right Hand RE-CML-7-6 Commercial Steel Silver Left Hand RE-RSM-6 Premium Steel Gold Right Hand RE-RSML-6 Premium Steel Gold Left Hand RE-ALRSM-6 Aluminum Red Right Hand RE-ALRSML-6 Aluminum Red Left Hand NEW Black Aluminum Rod Ends These 3 piece precision rod ends feature a teflon liner! RE-AM-6T-BK 3/8" Hole x 3/8" Shank Right Hand RE-AML-6T-BK 3/8" Hole x 3/8" Shank Left Hand RE-AM-6-7T-BK 3/8" Hole x 7/16" Shank Right Hand RE-AML-6-7T-BK 3/8" Hole x 7/16" Shank Left Hand RE-AM-7T-BK 7/16" Hole x 7/16" Shank Right Hand RE-AML-7T-BK 7/16" Hole x 7/16" Shank Left Hand 7/16 Hole x 7/16-20 Shank Male Rod Ends RE-CM-7 Commerical Steel Silver Right Hand RE-CML-7 Commerical Steel Silver Left Hand RE-JM-7 Premium Steel Gold Right Hand RE-JML-7 Premium Steel Gold Left Hand RE-ALJM-7 Aluminum Red Right Hand RE-ALJML-7 Aluminum Red Left Hand RE-KMX-7 High Strength Alloy Silver Right Hand RE-KMXL-7 High Strength Alloy Silver Left Hand 7/16 Hole x 1/2-20 Shank Male Rod Ends RE-RSM-7 Premium Steel Gold Right Hand RE-RSML-7 Premium Steel Gold Left Hand RE-ALRSM-7 Aluminum Red Right Hand RE-ALRSML-7 Aluminum Red Left Hand 7/16 to 3/8 Reducer Bushings These bronze oilite reducer bushings will fit into a 7/16 hole and reduce it down to 3/8. RB-0706B Steel Jam Nuts NJ-S-6R 3/8"-24 Silver Right Hand NJ-S-6L 3/8"-24 Gold Left Hand NJ-S-7R 7/16"-20 Silver Right Hand NJ-S-7L 7/16"-20 Gold Left Hand NJ-S-8R 1/2"-20 Silver Right Hand NJ-S-8L 1/2"-20 Gold Left Hand Aluminum Jam Nuts NJ-AL-6R 3/8"-24 Mill Finish Right Hand NJ-AL-6L 3/8"-24 Mill Finish Left Hand NJ-AL-7R 7/16"-20 Mill Finish Right Hand NJ-AL-7L 7/16"-20 Mill Finish Left Hand NJ-AL-8R 1/2"-20 Mill Finish Right Hand NJ-AL-8L 1/2"-20 Mill Finish Left Hand 1
4 Aluminum Tapered Rod End Spacers Aluminum Spacer Kits The kit includes the following in a clear compartmented case with a snap-shut lid: (8) 1/4 High Spacers (4) 1/2 High Spacers (2) 3/4 High Spacers (2) 1 High Spacers FS-23A FS-24A 3/8" ID Spacers 7/16" ID Spacers 3/8 ID Spacers SP-0604A 1/4" High SP-0608A 1/2" High SP-0612A 3/4" High SP-0616A 1" High 7/16 ID Spacers SP-0704A 1/4" High SP-0708A 1/2" High SP-0712A 3/4" High SP-0716A 1" High Rear Axle Bearings, Snap Rings, & Spirolock BR-6010-RR Standard Black Rubber Seal - Single Wide BR-6010-EMQ Premium Blue Rubber Seal- Single Wide BR-D6010-AC Premium Blue Rubber Seal- Double Wide SR Snap Ring for 6010 Bearing - Small (300) SR-S Spirolock for 6010 Bearing - Small (300) SR Snap Ring for 6010 Bearing - Medium (315) SR-S Spirolock for 6010 Bearing - Medium (315) King Pin Accessories SP-S B W-OL-10 KP-M-TBS King Pin Bushing- Oilite King Pin Oilite Washer (5/8") King Pin Thrust Bearing Kit (1- Bearing, 2- Races) BR-6203-RR BR-1641-RR BR-1641-PREM BR-L44643 BR-L44643S BR-L44610 Front Wheel Bearings 3/4" ID - Rubber Seals 1" ID - Rubber Seals 1" ID - Blue Rubber Seals - Premium 1" ID Tapered Roller Bearings (Inner) 1" ID Tapered Roller Bearing With Outer Seal Tapered Roller Race Set Screws & Collars 1/4" Set Screw SC-25S Collar- Steel 1/4" Set Screw SC-25A Collar- Aluminum 1/4" Collar With SC-25-1A Notch- 1 Piece- Aluminum Torsion Bushings TTB-M-001 3/4" ID for 1 1/8" x.083 Tubing - White/UHMW TTB-M-003 3/4" ID for 1 1/4" x.083 Tubing - Black/Nylon 6/6 TTB-M-004 7/8" ID for 1 1/4" x.083 Tubing- Black/Nylon 6/6 2
5 Fuel System Items (Earl s & Fragola) ERL-VL /8" FPT x #6 Shut Off Valve ERL-VL /8" FPT x #8 Shut Off Valve ERL-FF #6 Fuel Filter ERL-FF #8 Fuel Filter FRAG BL 3/8" FPT x #6 Shut Off Valve FRAG BL 3/8" FPT x #8 Shut Off Valve FRAG BL 1/2" FPT x #10 Shut Off Valve Stainless Steel Braided Brake Lines BL BL #3 x 60" Long- Straight #3 x 65" Long- Straight *Measurements are made end to end* These are the common lengths used on a micro. We stock many other sizes. If you are looking for a different size, please contact us! Spindle Items NL-NYT-12F NL-NYT-16F W-MS-12 W-MS-16 3/4"-16 Thin Locknut 1"-14 Thin Locknut 3/4" x 1.25 OD Washer 1" x 1.50 OD Washer Tire Valves & Tools TV-001 Shorty" Tire Valve Hole TV-005 Chrome Low-Pro Valve TV Replacement Plastic Valve Cap TV Replacement Valve Core- High Temp TV-TOOL Core Replacement Tool O-Rings (High Temp) OR-002 Cylinder Head O-Ring Set OR-003 Pipe Exhaust O-Ring Brake Fittings - #3 x 1/8 MPT FRAG FRAG FRAG FRAG FRAG FRAG Straight - Steel 45 Degrees - Steel 90 Degrees - Steel Straight - Aluminum 45 Degrees - Aluminum 90 Degrees - Aluminum Hex Head Bolts- Grade 8 We stock many sizes of hex head bolts in both grade 8 and titanium material. Please see the corresponding price sheet for available sizes and pricing. Locknuts (Nylon-Insert) & Washers Bumper Bolts (Stainless Steel) & Nuts BB-HH SS x 1 1/4" Hex Head BB-SH SS x 1 1/4" Socket Head NL-NYT-3F Thin Locknut BB-HH PK Hex Head Bumper Bolt Kit BB-SH PK Socket Head Bumper Bolt Kit The above kits include (12) bolts & (12) locknuts. We also stock many other sizes. Please contact us with any other size that you may be looking for NL-NYT-6F NL-NYT-6F-BK NL-NY-6F W-AN-6 NL-NYT-7F NL-NYT-7F-BK NL-NY-7F W-AN-7 3/8"-24 Thin Locknut 3/8"-24 Thin Locknut- BLACK 3/8"-24 Full Locknut 3/8" AN Washer 7/16"-20 Thin Locknut 7/16"-20 Thin Locknut- BLACK 7/16"-20 Full Locknut 7/16" AN Washer Taps & Dies TAP-6FL TAP-6FR TAP-7FL TAP-7FR 3/8"-24 Left Hand Tap 3/8"-24 Right Hand Tap 7/16"-20 Left Hand Tap 7/16"-20 Right Hand Tap DIE-6FL DIE-6FR DIE-7FL DIE-7FR 3/8"-24 Left Hand Die 3/8"-24 Right Hand Die 7/16"-20 Left Hand Die 7/16"-20 Right Hand Die 3
6 DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-WH Length Winged Steel DZ-TT-7 5/16 Dzus Buttons 7/16 Trick Dzus Button - 2 Piece 7/16" Steel Body / Aluminum Washer 7/16 Dzus Buttons DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-OHA-6450-BK.450 Length Oval Head Aluminum- BLACK DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-OHA-6500-BK.500 Length Oval Head Aluminum- BLACK DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-OH Length Oval Head Steel DZ-OHA Length Oval Head Aluminum DZ-OHA-6600-BK.600 Length Oval Head Aluminum- BLACK DZ-WH Length Winged Steel DZ-WH Length Winged Steel Big Headed Dzus Buttons DZ-BIG /16" x.400 Length Steel DZ-BIGA /16" x.450 Length Aluminum DZ-BIG /16" x.450 Length Steel DZ-BIGA /16" x.500 Length Aluminum DZ-BIGA-6500-BK 7/16" x.500 Length Aluminum- BLACK DZ-BIG /16" x.500 Length Steel DZ-BIGA /16" x.600 Length Aluminum DZ-BIGA-6600-BK 7/16" x.600 Length Aluminum- BLACK DZ-S-5325 DZ-S-6425 DZ-TAB-100L DZ-TAB-138L DZ-T-001 HS-001 HS-002 HS-005 PI-009 PI-009-EX Dzus Springs & Weld Tabs Dzus Tool- Standard 1" Spring 1 3/8" Spring 1" Lightweight Weld Plate 1 3/8" Lightweight Weld Plate Hood Savers - Stainless Re-Spring Kit This kit contains the following: (50)- 1 3/8 springs (100)- multi-grip rivets DZ-S-RESPRING Regular Hood Saver Trick Button Hood Saver Round Glue-On Hood Saver Dzus Spring Adjuster Tool DZ-T-ADJUST Deburring Tool Deburring Tool With Extra Blade Extra Blades Specialty Dzus Buttons Steel Mud Cover Dzus w/ DZ-OH-MUD Nylon Washer Aluminum Mud Cover Dzus DZ-OHA-MUD w/ Nylon Washers DZ-TS-516 5/16" Transfer Punch DZ-TS-716 7/16" Transfer Punch Transfer Punch Stud- Just place these into the weld plates, hold body panel up, and give a tap. The marks are transferred to the panel showing where to drill. 4
7 Multi-Grip Rivets Part Number Size Flange Grip Length Material Color Quantity RIV-A/S41-43DMG 1/8" Regular.031 to.187 MultiGrip Aluminum/Steel Plain 100 or 500 RIV-A/S43-45DMG 1/8" Regular.151 to.312 MultiGrip Aluminum/Steel Plain 100 or 500 RIV-A/S43-45MGLF 1/8" Large.151 to.312 MultiGrip Aluminum/Steel Plain 500 RIV-A/S62-64MG 3/16" Regular.062 to.250 MultiGrip Aluminum/Steel Plain 250 RIV-A/S63-66MG 3/16" Regular.187 to.437 MultiGrip Aluminum/Steel Plain 250 ALL RIVETS COME BOXED AND LABELED --- BULK AVAILABLE UPON REQUEST RIVET NOTES: RIV-A/S43-45DMG is perfect for dzus springs! Double Ended Drill Bits DPT-30 1/8" DPT-11 3/16" We stock many other sizes of rivets. Please visit our website at for a complete list. Rivet Back-Up Washers RIV-BU-18A 1/8" Aluminum RIV-BU-18S 1/8" Steel RIV-BU-316A 3/16" Aluminum RIV-BU-316S 3/16" Steel Air Riveter This air riveter is a powerful and durable tool. Its unique air relief prevents overloading and increases life. It comes with a 3/32, 1/8, 5/32, and a 3/16 nose piece. RIV-AIR Hand Riveter This hand riveter includes four interchangeable nose pieces with a wrench to set four blind rivet hole sizes including 3/32", 1/8", 5/32", and 3/16". RIV-HAND PI-010 PI-011 Cylinder Flashlight Flexible Cylinder Flashight With A Magnetic Tip Replacement Bulbs For Above 5
8 Locknut Kits- Thin Height This kit includes the following nyloninserted locknuts in a compartmented plastic case: (30)- 1/4-20 or 1/4-28 (25)- 5/16-18 or 5/16-24 (20)- 3/8-16 or 3/8-24 (15)- 7/16-14 or 7/16-20 (15)- 1/2-13 or 1/2-20 FS-1F FS-1C Fine Thread Coarse Thread Locknut Kits- Full Height This kit includes the following nyloninserted locknuts in a compartmented plastic case: (25)- 1/4-20 or 1/4-28 (20)- 5/16-18 or 5/16-24 (20)- 3/8-16 or 3/8-24 (15)- 7/16-14 or 7/16-20 (12)- 1/2-13 or 1/2-20 FS-2F FS-2C Fine Thread Coarse Thread Stover Locknut Kit This kit contains the following allmetal locknuts in a compartmented plastic case: (25)- 1/4-28 (20)- 5/16-24 (20)- 3/8-24 (15)- 7/16-20 (15)- 1/2-20 FS-10 AN Washer Kits This kit includes the following stainless steel washers in a compartmented plastic case: (35)- 1/4 AN (35)- 5/16 AN (30)- 3/8 AN (25)- 7/16 AN (20)- 1/2 AN FS-4 Regular (.060) FS-4T Thin (.030) FS-4C Regular and Thin (same amounts) DEALERS: All of the hardware assortments come in a clear, durable plastic case with snap-shut lids. They also come in a protective sleeve and each kit is labeled and ready for resale! Blind Rivet Kit This kit is an assortment of the following in a compartmented plastic case: 1/8 back-up washers 3/16 back-up washers 1/8 regular and multi-grip rivets 3/16 regular flange and large flange multi-grip rivets FS-3 *NEW* Ultimate Multi-Grip Kit This kit is an assortment of the following multi-grip rivets in a compartmented plastic case: 1/8" short multi-grip- standard flange 1/8" long multi-grip- standard flange 3/16" short multi-grip- standard flange 3/16" long multi-grip- standard flange FS-3XL MICRO Black Locknut Kit This kit includes the following nyloninserted locknuts in a compartmented plastic case: (30) (30)- 1/4-28 (25)- 5/16-24 (20)- 3/8-24 SPECIALLY DESIGNED FOR MICROS! (20)- 7/
9 POPULAR Caplug Kit- 72 Piece This kit includes the following in a labeled, resealable clear plastic bag: (6)- #3 caps (6)- #3 plugs (6)- #4 caps (6)- #4 plugs (6)- #6 caps (6)- #6 plugs (6)- #8 caps (6)- #8 plugs (6)- #10 caps (6)- #10 plugs (6)- #12 caps (6)- #12 plugs CP-KIT-72 DEALERS: The caplugs below are listed in racer pack format, in smaller quantities that would be convenient for the racers. These packs come packaged and heat sealed in a clear bag, perfect for easy resale. Caplug Kit- 156 Piece This kit includes the following in a clear compartmented case with a snap-shut lid. Each size has its own compartment. (12)- #3 caps (12)- #3 plugs (12)- #4 caps (12)- #4 plugs (12)- #6 caps (12)- #6 plugs (12)- #8 caps (12)- #8 plugs (12)- #10 caps (12)- #10 plugs (12)- #12 caps (12)- #12 plugs (6)- #16 caps (6)- #16 plugs CP-KIT-156 Caplugs For AN Series Fittings - Racer Packs CP-F3-RP #3 cap 25 PK CP-F4-RP #4 cap 25 PK CP-F6-RP #6 cap 25 PK CP-F8-RP #8 cap 20 PK CP-F10-RP #10 cap 15 PK CP-F12-RP #12 cap 10 PK CP-F16-RP #16 cap 8 PK CP-M3-RP #3 plug 25 PK CP-M4-RP #4 plug 25 PK CP-M6-RP #6 plug 25 PK CP-M8-RP #8 plug 20 PK CP-M10-RP #10 plug 15 PK CP-M12-RP #12 plug 10 PK CP-M16-RP #16 plug 8 PK Caplugs For AN Series Fittings - BULK CP-F3 CP-F4 CP-F6 CP-F8 CP-F10 CP-F12 CP-F16 CP-M3 CP-M4 CP-M6 CP-M8 CP-M10 CP-M12 CP-M16 #3 cap #4 cap #6 cap #8 cap #10 cap #12 cap #16 cap #3 plug #4 plug #6 plug #8 plug #10 plug #12 plug #16 plug 1/4 Black Panel Fasteners PF-0004 We have thousands of fittings currently in stock, along with hundreds of feet of hose. Please contact us for a Fragola catalog and price sheet. 7
10 RT-2001 Standard Duty 2" x 90' Red RT-2002 Standard Duty 2" x 90' Blue RT-2003 Standard Duty 2" x 90' Yellow RT-2004 Standard Duty 2" x 90' Black RT-2005 Standard Duty 2" x 90' Silver RT-2006 Standard Duty 2" x 90' White RT-2008 Standard Duty 2" x 90' Orange RT-2010 Standard Duty 2" x 90' Purple RT-2003N Standard Duty 2" x 90' Neon Yellow RT-2007N Standard Duty 2" x 90' Neon Green RT-2008N Standard Duty 2" x 90' Neon Orange RT-2015N Standard Duty 2" x 90' Neon Pink RT-8014 Non-Skid 2" x 10' Black Sparkle RT " x 45' Checkerboard- Standard RT " x 45' Checkerboard- Angled *Micro Radius Rod Size ISC Racer s Tape Pit Clips Pit Clips are a parts holding system for trailers, pit carts, etc. These clips are black and UV protected so they can even be used outside. Some common uses are to hold radius rods, shocks, brooms, tools, and much more! Holding Range PC-050B 3/8"-1/2" *PC-075B 5/8"-7/8" PC-100B 7/8"-1 1/8" PC-125B 1 1/8"-1 3/8" PC-150B 1 3/8"-1 5/8" PC-175B 1 5/8"-1 7/8" PC-200B 1 7/8"-2 1/8" CT N CT UV CT BE CT RD CT YW CT OE CT GY CT PU We also stock 4, 7, & 14 cable ties. PI-008 Cable Ties - 100PKS 11" White 11" Black 11" Blue 11" Red 11" Yellow 11" Orange 11" Grey 11" Purple Hose Cutter PI-028 Tire Stagger Tapes This tire tape is 1/4 wide and 10 long with a magnetic back. Safety Wire & Accessories PI-001 Safety Wire Stainless Steel - One Pound Roll PI-002 Safety Wire Pliers PI-003 Safety Wire Drill Jig PI-029 PI-034 PI-037 PI-018 AN Wrenches & Sets Aluminum AN Dual Wrench Set Including #6, #8, #10, #12, & #16- Made of 3/8" Thick Material- 5 Piece Set Black Aluminum AN Dual Wrench Set Including #6, #8, #10, #12, & #16 - Made of 1/2" Thick Material- 5 Piece Set Aluminum AN Dual Sided Wrench Set Including #3, #4, #6, #8, #10, #12, #16, & #20-7 Piece Set Adjustable Aluminum AN Wrench #3 Through #12 8
POLICIES. PA Sales Tax: Anyone living in the state of Pennsylvania must pay 6% sales tax unless a tax exemption certificate is on file with us.
POLICIES Location & Visitation Policy: We are located just off of Route 74 about three miles north of the town of Carlisle. Shop visitation is by appointment only, so please call before you visit. We will
More informationCircle Track Merchandising Display
Part No: ALL070 Circle Track Includes 49 items selected for fast and frequent sales. Fits within a 4' x 4' area. Attractive packaging designs. Picture shown represents the recommended layout. Pegboard
More informationJL SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS
JL SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS TOOLS NEEDED 3/4 Wrench 3/4 Socket 9/16 Wrench or Socket 1 1/2 Socket 1 1/8 Wrench 13mm Socket Torque Wrench for 1 1/2 Socket HARDWARE 2-1/2 X 2 Hex Bolt
More informationForover15years, Pro-Werks has delivered the highest quality components that make fabrication easier.
Forover15years, Pro-Werks has delivered the highest quality components that make fabrication easier. Whether your building a race car, street rod, custom plane, boat, or off-road vehicle, we have your
More information7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT
RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING
More informationMedical Gas Outlet Adaptor, Fitting and Hose Catalog
2018 Medical Gas Outlet Adaptor, Fitting and Hose Catalog For Clinical Engineering, Biomedical, and Respiratory, Departments 11300 Sanders Drive, Suite 1 Rancho Cordova, CA 95742 (916) 853-1222 Fax (916)
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationZoom. Parts Manual. Models A 5/08 Printed in USA
Zoom Parts Manual Models 108 0 1087 0 108 1 101 1 0100A /08 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationChevy Nova Pro-Touring Front Suspension Installation Instructions
1962-1967 Chevy Nova Pro-Touring Front Suspension Installation Instructions 1-800-984-6259 www.totalcostinvolved.com 1 Pro-Touring Clip A-Arm Assembly Sway Bar Assembly Fender Panel Kit 8 7/16-20 * 1 ¼
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationTT6101 Rotary Tedder
TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationToyota 4x4 IFS Pickup, Runner 4 Lift Kit Installation Instructions
www.skyjacker.com Toyota 4x4 IFS 86-95 Pickup, 86-89 4 Runner 4 Lift Kit Installation Instructions Required Tool List: * Metric / Standard Wrenches and Sockets * Floor Jack * Jack Stands * Measuring Tape
More informationRJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS
RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW
More informationRJS2017 SPORTSMAN RACER KIT LESS ELECTRICS
RJS2017 SPORTSMAN RACER KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORTSMAN RACER KIT FOR OVAL RACING, DRAG RACING OR JUST FUN STREET BASHING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationJK SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS
JK SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS TOOLS NEEDED 3/4 Wrench 3/4 Socket 9/16 Wrench or Socket 1 1/2 Socket 1 1/8 Wrench 13mm Socket Torque Wrench for 1 1/2 Socket 5mm Allen T20 Torx Hammer
More informationBX Honda CR-V Installation Instructions
Attachment Tab Height: 15.5 Attachment Tab Width: 24 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories
More informationINSTALLATION INSTRUCTIONS QA1 P/N x400, x500, x600, x400, x500, x F100 Front Coil-over Suspension System
INSTALLATION INSTRUCTIONS QA1 P/N 52620-x400, 52620-x500, 52620-x600, 52621-x400, 52621-x500, 52621-x600 65-72 F100 Front Coil-over Suspension System TOOLS AND SUPPLIES REQUIRED Floor Jack Two (2) Jack
More informationEasy turn. 1
FILL caps CAPS & Bung & Bungs assemblies Easy turn This lightweight, non-vented cap features positive grip finger notches and quick-starting course threads. Caps are available in anodized black, red, blue,
More informationJEEP JK 4 LONGARM. Tools Needed: Thank you for choosing Rough Country for your suspension needs.
921786000 Thank you for choosing Rough Country for your suspension needs. JEEP JK 4 LONGARM Rough Country recommends a certified technician install this system. In addition to these instructions, professional
More informationCommunication & Low Voltage. Communication & Low Voltage
145 Communication & low Voltage Cable Supports cable ties up to 9 /32" wide from flanges 1 /16" to 3 /4" thick. 8" cable tie included. Simply installed with a hammer. BE Series BF Series 78101119970 BE-2-4-CT2
More information1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES
1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are
More informationClass 8.8 Class MM 18ft/lbs 23 ft/lbs 10MM 32ft/lbs 45ft/lbs 12MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs
92190500 Jeep Grand Cherokee 93-98 ZJ 4 Longarm Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition to these
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends
More informationFord Super Duty 4 & 6 Suspension Lift Ford Super Duty 8.5" Suspension Lift Installation Instructions
www.skyjacker.com Required Tool List: 2005-2010 Ford Super Duty 4 & 6 Suspension Lift 2008-2010 Ford Super Duty 8.5" Suspension Lift Installation Instructions * Assorted Drill Bits * Brake Fluid * Metric
More informationSlide the billet aluminum cap over the bushing and secure with the 3/8-16 x 2 1/2 socket head allen and locknuts provided.
Slide the billet aluminum cap over the bushing and secure with the 3/8-16 x 2 1/2 socket head allen and locknuts provided. Put the urethane bushings into the upper antiroll-bar-link eyebolt. Coat the bushings
More informationInstallation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output)
Installation Instructions for Lingenfelter 2007-2013 GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output) PN L300090607 Revision - 1.1 Lingenfelter Performance Engineering
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower
More informationPARTS LIST CHARGER 2022 DB
PARTS LIST CHARGER 2022 DB SAVE THESE INSTRUCTIONS CHASSIS AND DRIVE ASSEMBLY 101 2694069 #40 ROLLER CHAIN 57 LINKS WITH MASTER 1 2694081 #40 ROLLER CHAIN 57 LINKS NO MASTER 1 2795211 LINK MASTER #40 CHAIN
More informationWARRANTY REGISTRATION AND POLICY
WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 02 0000 0180 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More information2013 Official Jr Sprint Pricelist
2013 Official Jr Sprint Pricelist DISCLAIMER OF WARRANTY There is no warranty, either expressed or implied with respect to any services provided by Stan Yockey Motorsports. All products and services and
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
More informationDIFFERENTIAL. OL = Overall Length
3 Rear Axle Shafts Blazer 3- Jimmy 3-34-4 REAR AXLE SHAFT -/ GEAR WD BLZ JIM 3- ().44 4. 34- REAR AXLE SHAFT -/ GEAR WD BLZ JIM - () 4.4. 34- REAR AXLE SHAFT -/ GEAR 4WD BLZ JIM 3- ().44 4. 34- REAR AXLE
More informationMid Size Mower ProLine Pistol Grip Hydro 15 HP with 44in SD Mower
Form No. 0 Mid Size Mower ProLine Pistol Grip Hydro HP with in SD Mower Model No. 0 000000 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the
More informationTools Needed: Class 8.8 Class MM 55ft/lbs 75ft/lbs 14MM 85ft/lbs 120ft/lbs 16MM 130ft/lbs 165ft/lbs 18MM 170ft/lbs 240ft/lbs
921788000 JEEP JK 6 LONGARM Rough Country recommends a certified technician install this system. In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as
More informationJK SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS
JK SHIELD TIRE CARRIER INSTALLATION INSTRUCTIONS TOOLS NEEDED 7/16" wrench or socket 3/4" wrench or socket 15/16" wrench or socket 5/8" wrench or socket 3/16 Allen wrench or socket 1 1/8" Wrench HARDWARE
More informationFor a complete listing of kit contents, see page 225.
HS 455 Shrink Tube Kit - microseries Sealing & securing can now be taken to go! Contains 55 6" pieces of single wall 2-1 polyolefin, flexible type. I.D. ranges 1 8"- 1 2" in red, black, yellow and blue.
More informationCastle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine
Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/
More informationFord Super Duty 4-8.5" Suspension Lift Installation Instructions
www.skyjacker.com Required Tool List: 2005-2010 Ford Super Duty 4-8.5" Suspension Lift Installation Instructions * Safety Glasses * Assorted Drill Bits * Brake Fluid * Metric & Standard Wrenches & sockets
More informationHuge 10 Year Anniversary / OPEN HOUSE Sale. 10th Annual OPEN HOUSE November 14 & 15
10th Annual OPEN HOUSE November 14 & 15 Friday 11:00am to 6:00pm Saturday 8:00am to 1:00pm Huge 10 Year Anniversary / OPEN HOUSE Sale Sprint Car, Late Model, Micro-Sprint & Pit Supplies Celebrate Our 10th
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationPlease read these instructions completely before proceeding with installation. Read all maintenance guidelines on page 7 before operating the vehicle.
MN-643 (02511) ECR 5461 Kit No. 39205 Please read these instructions completely before proceeding with installation Item P/N Description Quantity A 26391 Driver-Side Beam Assembly 1 B 26414 Passenger-Side
More informationFord Super Duty 4-8.5" Suspension Lift Installation Instructions
www.skyjacker.com REQUIRED TOOL LIST: 2005-2010 Ford Super Duty 4-8.5" Suspension Lift Installation Instructions * Safety Glasses * Assorted Drill Bits * Brake Fluid * Metric / Standard Sockets & Wrenches
More informationTHE ULTIMATE FASTENER SYSTEM
THE ULTIMATE FASTENER SYSTEM Version A1 STEP 1 STEP 2 STEP 3 STEP 4 (98 DIFFERENT ITEMS) (108 DIFFERENT ITEMS) (104 DIFFERENT ITEMS) (103 DIFFERENT ITEMS) 4001 Plastic Fasteners 4023 Import Fasteners #1
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationWARRANTY REGISTRATION AND POLICY
WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material
More informationiqpc912 PARTS MANUAL PC912PM v1
iqpc912 PARTS MANUAL PC912PM v1 See Page 10 See Page 6 & See Page 12 See Page 2 See Page 16 See Page 1 See Page 1 See Page See Page 22 See Page 20 See Page 2 See Page 26 3 16 19 1 17 1 1 11 13 12 10 9
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationZ253 Z Master with 62in SFS Side Discharge Mower
Form No. REV A Z Z Master with 6in SFS Side Discharge Mower Model No. 00000 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
More information***THE OWNER'S MANUAL MUST BE GIVEN TO THE END USE CUSTOMER AFTER COMPLETING THE INSTALLATION.***
INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE HARLEY MECHANICAL REVERSE 1999-2006 FIVE SPEED FLH LAST UPDATED: OCTOBER 2011 AS THE INSTALLER OF THIS MECHANICAL REVERSE, YOU MUST BECOME FAMILIAR WITH PROPER
More informationFord F250 / F350 4WD 4-6 Suspension Lift Installation Instructions
1980-1997 Ford F250 / F350 4WD 4-6 Suspension Lift Installation Instructions www.skyjacker.com Required Tool List: * Safety Glasses * Metric / Standard Wrenches & sockets * Assorted Drill Bits * Floor
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black
More informationINSTALLATION. Note: Not all parts will be used in the installation of this product. -cont.-
5005 Fits: 06-up FLHX, 04-up Screamin Eagle Ultra Classic Electra Glide & Screamin Eagle Electra Glide Classic, '97-up FLHT, FLHTC, FLHTCU, FLHR PartS Included 1 Right Driving Light Assembly 1 Left Driving
More information2008, K&M NEWSPAPER SERVICES, INC. INSERTER 2299 INSERTER
99 INSERTER - - - 800-88-0 COMPLETE FIXED POCKET WALL ITEM PART # DESCRIPTION QUANTITY KMS 0CW COMPLETE POCKET WALL COMES ASSEMBLED WITH YOUR CHOICE OF GRIPPERS & PADDLES - - - 800-88-0 FIXED POCKET WALL
More information.401 SHANK AIR HAMMERS
AIR HAMMERS 507 AIR TOOLS AIR HAMMERS.401 SHANK AIR HAMMERS.401 Shank Medium Barrel Air Hammer 404123 / AH150M Medium barrel delivers steady powerful blows Accepts popular.401 taper shank chisels Standard
More informationcarbon fiber before assembly. Sand glue to the edges and
chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28
More informationHOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.
HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is
More informationPARTS LIST: 8581 DODGE LONG ARM BRACKETS 03-13
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 8580 03-12 DODGE 2500/3500 4X4, 06-08 1500 MEGACAB 4X4 LONG ARM SUSPENSION KIT V3.0 GENERAL NOTES: These instructions are also available
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 03 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationRJS2001 PRO STOCK KIT LESS ELECTRICS
RJS2001 PRO STOCK KIT LESS ELECTRICS THANKS FOR BUYING RJ SPEED S PRO STOCK DRAG KIT. IT IS MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS REPEATEDLY AT HIGH SPEED. IT REQUIRES
More informationHR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.
HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards
More informationINSTRUCTION MANUAL AX90053-I001
INSTRUCTION MANUAL AX90053-I001 2 3 AX80018 Hardware Parts Tree AX80006 Servo Set x3 AX31301 10mm Shock Caps Parts Tree (Blue) AX80069 AX31300 10mm Shock Parts Tree 2 (Blue) AX31114 WB8 Driveshaft AX80033
More informationK-Motion Valve Springs are the choice of winning racers. K-Motion
K-Motion Valve Springs are the choice of winning racers. K-Motion Valve Springs deliver the highest quality along with the superior dependability that s needed to meet today s performance requirements.
More informationFirst, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
More informationPARTS LIST INCLUDED IN KIT TORQUE SPECIFICATIONS PRODUCT SAFETY LABEL MUST BE INSTALLED INSIDE CAB IN PLAIN VIEW OF ALL OCCUPANTS.
INSTALLATION INSTRUCTIONS FOR 2010-15 TOYOTA 4RUNNER SR5 AND SPORT (Non-Air Leveling & Non-X-REAS) AND FOR 2010-14 TOYOTA FJ CRUISER 2WD & 4WD 3 SUSPENSION LIFT KIT PART NUMBER 432 WARNING!!! READ AND
More informationDrive End Bracket & Bearing. Drive End Bracket. Tandem Axle # #865733
Drive End Bracket & Bearing #865089 1 06409700 1" Lock Collar 2 865733 Drive Bracket w/ Bearing 3 310037 End Drive Shaft Drive End Bracket #865733 1 03003100 Bearing 1" w/snap Ring 2 957795 Drive End Bracket
More information2.007 Design and Manufacturing I
MIT OpenCourseWare http://ocw.mit.edu 2.007 Design and Manufacturing I Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. The 2.007 Kit List
More informationTOOLS, STEMS & ACCESSORIES BARTEC TPMS DIAGNOSTIC TOOLS
T.P.M.S. L.E.D. READOUT TECH300 TIRE PRESSURE MONITORING SYSTEM TOOLS, STEMS & ACCESSORIES BARTEC TPMS DIAGNOSTIC TOOLS WRT300P Easy to use. We can train you to use this tool in less than 30 minutes. Free
More informationINSTALLATION GUIDE Bolt-On Drag-Race Strut Clip Chevy II
INSTALLATION GUIDE 7702 Bolt-On Drag-Race Strut Clip 1962-67 Chevy II Description: STRUT CLIP 4130 BOLT ON 62-67 CHEVY II, INCLUDES 4130 ROUND TUBE FRAME CLIP, DOUBLE-ADJUSTABLE STRUTS, ADJUSTABLE-HEIGHT
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationINSTALLATION INSTRUCTIONS FOR M.O.R.E. SHACKLE REVERSAL SYSTEM (S.R.S. ) PART # THIS SYSTEM FITS Jeep CJ-5, CJ-7, CJ-8 VEHICLES.
INSTALLATION INSTRUCTIONS FOR M.O.R.E. SHACKLE REVERSAL SYSTEM (S.R.S. ) PART # 7686-6 THIS SYSTEM FITS 1976-1986 Jeep CJ-5, CJ-7, CJ-8 VEHICLES. Please read all instructions carefully (including terms-policies)
More informationGroundsmaster 345 Traction Unit
Form No. 3327-123 Groundsmaster 345 Traction Unit Model No. 30789 220000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
More informationNext, set the bar level and tighten it down. Do this on both the driver and passenger sides.
Next, set the bar level and tighten it down. Do this on both the driver and passenger sides. Using two tape measures, measure the outside width at the front and the rear of the tubes. The front dimension
More informationTOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationSupplier Of Garden Tractor Pulling Products 2015 Volume 1 Contact Information
Supplier Of Garden Tractor Pulling Products 2015 Volume 1 Contact Information Owners Peter, Wanda, and Ben Barbeau Telephone Phone Number 860-234-4285 Fax 860-774-2583 Postal Address 80 Tillinghast Road
More information8CAR Chassis Pkg. Includes - 108" Wheel Base Bare Chassis with Interior and Body Not Installed. 8CAR Chassis
8CAR Chassis Pkg Starting at $6,395.00 Includes - 108" Wheel Base Bare Chassis with Interior and Body Not Installed. 8CAR Chassis Interior & Body - NOT Installed Keyed Upper A-Arm Mounts Standard Color
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 01 0000 0136 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationUSE THE PARTS LIST BELOW TO MAKE SURE YOUR KIT IS COMPLETE BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT:
1962-1967 Chevy Nova Pro-Touring Front Suspension Installation Instructions Tech line: 1-855-693-1259 www.totalcostinvolved.com Read and understand these instructions before starting any work! USE THE
More informationTT4100 Rotary Tedder
TT0 Rotary Tedder Serial numbers 0 and higher Illustrated Parts Breakdown Page Page Tongue Assembly S/N - Tongue Assembly S/N to Page Page Page Page Page Tongue Assembly S/N to Tongue Assembly S/N + Main
More informationTT4101 Rotary Tedder
TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N
More informationAbrasives & Abrasive Hardware. ISO 9001:2008 Quality Management System
Abrasives & Abrasive Hardware ISO 9001:2008 Quality Management System Clesco the Abrasive Hardware Specialist This catalog reflects the major product categories & is not comprehensive in including all
More informationLexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements
IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2013-15 Lexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements Part #1372-0102-13 / Black Ice
More informationWalk-Behind Lawn Mowers
Walk-Behind Lawn Mowers Parts Manual Models 171 LM21 16 LM21S 17 LM21SW 04502100 / Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More informationJEEP LIBERTY 2 COIL SPRING SPACER LIFT INSTALLATION INSTRUCTIONS IT# J 244
3651 N. Hwy 89 Chino Valley, AZ 86323 (928) 636-7080 www.p-a-g.net 3651 N. Hwy 89 Chino Valley, AZ 86323 (928) 636-3175 www.p-a-g.net JEEP LIBERTY 2 COIL SPRING SPACER LIFT INSTALLATION INSTRUCTIONS 2008-201
More informationDodge Ram 1500, Quad/Reg. Cab, w/6.4ft. & 8ft. Bed, 2 & 4 WD. For updates see PRODUCT SUPPORT tab at
Assembly, Installation, Operation and Maintenance Instructions 2009-2016 Dodge Ram 1500, Quad/Reg. Cab, w/6.4ft. & 8ft. Bed, 2 & 4 WD. Part # 30665 Dealer / Installer: Provide a copy of these Instructions
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationDODGE / RAM 1500 *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMENDED TOWING CAPACITY ***
6444 DODGE / RAM 500 6/8/207 OF 5 *** DO NOT EXCEED MANUFACTURER'S RECOMENDED TOWING CAPACITY *** ITEM QTY PART NUMBER 0 /2-3 x 2" 2 4 /2-3 x 3/4, GR8 3 4 CM-SP2 4 2 CM-SP6 5 4 HFN 23, GR8 6 2 CM-SP4 7
More informationINSTALLATION INSTRUCTION 88148
INSTALLATION INSTRUCTION 88148 Rev C For Rancho Suspension Systems RS6548, RS6549 & RS6550: GM 2500HD, 2500, and 1500HD Trucks READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION
More informationHand Beading Tool.12 Hand Tube Bender.13 EZ-Beading Tool.14 PTFE Tape & Paste...15 Pressure Test Kit.15 Aluminium Wrenches.16 Aluminium Vice Jaws.
Table of Contents Fabrication Parts Male Weld-on Adapters 2 Female Weld-on Adapters...2 Aluminium Weld Bends 3 Alloy Bends.... 3 Wiggins Weld-on Adapters..4 Wiggins Connectors.5 Cores..6 Radiator Necks..7
More informationDoing Our Best to Provide You the Best. Jeep Cherokee Trailhawk. 1/17 TP29308,Rev 1. Pin Height - 21 Pin Centers Page 1. Safety cable link hole
Jeep Cherokee Trailhawk 1/17 TP29308,Rev 1 Pin Height - 21 Pin Centers - 33 Safety cable link hole ITEM PART # QTY DESCRIPTION 1 00057 2 WASHER,.25 SPRING LOCK 2 00059 4 WASHER, FLAT.375 3 00062 2 NUT.25NC
More informationInstallation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with AC clutch controlled fan output)
Installation Instructions for Lingenfelter 2007-2013 GM 2500 Suburban & Yukon XL Auxiliary Fan System (with AC clutch controlled fan output) PN L300080607 Revision - 1.1 Lingenfelter Performance Engineering
More informationJK HD Skid Plate for Rear Falcon Shocks
1 JK HD Skid Plate for Rear Falcon Shocks Kit # 36-07-01-300 Tools needed: Important Notes: Prior to beginning this or any installation read these instructions to familiarize yourself with the required
More informationASTRO TITANIUM LLC SPRINT CAR & MIDGET TI BOLT KITS
ASTRO TITANIUM LLC SPRINT CAR & MIDGET TI BOLT KITS TITANIUM STRENGHT & WEIGHT SAVINGS ARE WORTH THEIR PRICE WHEN YOU GET THE CHECKERED FLAG TITANIUM ROTATING WEIGHT IS A VERY INEXPENSIVE PAGE 1 OF 4 WAY
More information